Hui Zhao [Thu, 21 Mar 2019 20:28:14 +0000 (21:28 +0100)]
net/bonding: fix OOB access in other aggregator modes
slave aggregator_port_id is in [0, RTE_MAX_ETHPORTS-1] range.
If RTE_MAX_ETHPORTS is > 8, we can hit out of bound accesses on
agg_bandwidth[] and agg_count[] arrays.
Fixes: 6d72657ce379 ("net/bonding: add other aggregator modes") Cc: stable@dpdk.org Signed-off-by: Hui Zhao <zhaohui8@huawei.com> Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Acked-by: Chas Williams <chas3@att.com>
During PF/VF link update, a default speed value of 100M will be set
if get_link_info has failed or speed is unknown.
Consequently if PF is put in no-carrier state, VFs will switch to
"in carrier" state due to a link up + a link speed set to 100M
(default value if no speed detected).
To be consistent with linux drivers on which PF and VFs are in
same carrier state, sets default speed to undefined (instead of 100M)
and updates a link status of VF only if link is up and speed is
different from undefined.
The speed capability of X553 1GbE should be ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_100M | ETH_LINK_SPEED_10M rather than ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_10G. Correct it to fix the issue.
Add support for setting VLAN PCP field via rte_flow API. Hardware
overwrites the entire 16-bit VLAN TCI field. So, both VLAN VID and
PCP actions must be specified.
Add support for matching VLAN fields via rte_flow API.
When matching VLAN pattern, the ethertype field in hardware
filter specification must contain VLAN header's ethertype, and
not Ethernet header's ethertype. The hardware automatically
searches for ethertype 0x8100 in Ethernet header, when
parsing incoming packet against VLAN pattern.
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
net/cxgbe: avoid polling link status before device start
Link updates come in firmware event queue, which is only created
when device starts. So, don't poll for link status if firmware
event queue is not yet created.
This fixes NULL dereference when accessing non existent firmware
event queue.
Fixes: 265af08e75ba ("net/cxgbe: add link up and down ops") Cc: stable@dpdk.org Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Set VLAN action mode to VLAN_REWRITE only if VLAN_INSERT has not been
set yet. Otherwise, the resulting VLAN packets will have their VLAN
header rewritten, instead of pushing a new outer VLAN header.
Also fix the VLAN ID extraction logic and endianness issues.
In the process of recovery from error CQE, when using vectorized Rx
burst, the initialization of data length in mbufs was not done.
As a result the wrong length was left written in mbuf, causing
memory overwrite or wrong error report.
This patch fixes the initialization of mbuf data length during
recovery from error CQE, when using vectorized Rx burst,
net/mlx5: fix UAR remap initialization for 32-bit systems
The txq_uar_init() routine uses the uninitialized uar_mmap_offset
field in 32-bit configurations due to this field is initialized
after txq_uar_init() call.
Noa Ezra [Wed, 19 Jun 2019 06:13:44 +0000 (06:13 +0000)]
net/vhost: support TSO disabling
TSO (TCP Segmentation Offload) is enabled by default on vhost.
Add the ability to disable TSO on vhost.
The user should also disable the feature on the virtual machine's xml.
Michal Krawczyk [Thu, 26 Sep 2019 10:45:27 +0000 (12:45 +0200)]
maintainers: update for ena
Add Igor Chauskin from the Amazon as another maintainer of the driver.
Igor is another person from the Amazon team that is responsible for the
ENA DPDK driver.
Marvin Liu [Mon, 23 Sep 2019 14:05:11 +0000 (22:05 +0800)]
net/virtio: fix mbuf data and packet length mismatch
If reserve virtio header room by function rte_pktmbuf_prepend, both
segment data length and packet length of mbuf will be increased.
Data length will be equal to descriptor length, while packet length
should be decreased as virtio-net header won't be taken into packet.
Thus will cause mismatch in mbuf structure. Fix this issue by access
mbuf data directly and increase descriptor length if it is needed.
Fixes: 58169a9c8153 ("net/virtio: support Tx checksum offload") Fixes: 892dc798fa9c ("net/virtio: implement Tx path for packed queues") Fixes: 4905ed3a523f ("net/virtio: optimize Tx enqueue for packed ring") Fixes: e5f456a98d3c ("net/virtio: support in-order Rx and Tx") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Marvin Liu <yong.liu@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
net/virtio: get all pending Rx packets in vectorized paths
The loop to read packets does not take all packets as the number of
available packets (nb_used) is decremented in the loop.
Take all available packets provides a performance improvement of 3%.
Adrian Moreno [Fri, 6 Sep 2019 12:50:20 +0000 (14:50 +0200)]
vhost: fix vring memory partially mapped
Only the mapping of the vring addresses is being ensured. This causes
errors when the vring size is larger than the IOTLB page size. E.g:
queue sizes > 256 for 4K IOTLB pages
Ensure the entire vring memory range gets mapped. Refactor duplicated
code for for IOTLB UPDATE and IOTLB INVALIDATE and add packed virtqueue
support.
Fixes: 09927b524969 ("vhost: translate ring addresses when IOMMU enabled") Cc: stable@dpdk.org Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Marvin Liu [Wed, 18 Sep 2019 17:06:55 +0000 (01:06 +0800)]
net/virtio: cleanup on demand when in-order Tx
Check whether space are enough before burst enqueue operation. If more
space is needed, will try to clean up used descriptors for space on
demand. It can give more chances to free used descriptors, thus will
help RFC2544 performance. Also deduct failed xmit packets from total
xmit number.
Fixes: e5f456a98d3c ("net/virtio: support in-order Rx and Tx") Cc: stable@dpdk.org Signed-off-by: Marvin Liu <yong.liu@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Marvin Liu [Wed, 18 Sep 2019 17:06:54 +0000 (01:06 +0800)]
net/virtio: update stats when in-order Tx done
When doing xmit in-order enqueue, packets are buffered and then flushed
into avail ring. Buffered packets can be dropped due to insufficient
space. Moving stats update action just after successful avail ring
updates can guarantee correctness.
Fixes: e5f456a98d3c ("net/virtio: support in-order Rx and Tx") Cc: stable@dpdk.org Signed-off-by: Marvin Liu <yong.liu@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Noa Ezra [Thu, 20 Jun 2019 06:33:03 +0000 (06:33 +0000)]
net/vhost: fix redundant queue state event
In some situations, when a virtual machine is starting,
vring_state_changed can be called while there was no change in the
queue state. This fix makes sure that there was really a change in the
queue state before calling the callback for EVENT_QUEUE_STATE.
Fixes: ee584e9710b9 ("vhost: add driver on top of the library") Cc: stable@dpdk.org Signed-off-by: Noa Ezra <noae@mellanox.com> Reviewed-by: Matan Azrad <matan@mellanox.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tiwei Bie [Mon, 19 Aug 2019 11:34:57 +0000 (19:34 +0800)]
vhost: protect vring access done by application
Besides the enqueue/dequeue API, other APIs of the builtin net
backend should also be protected.
Fixes: a3688046995f ("vhost: protect active rings from async ring changes") Cc: stable@dpdk.org Reported-by: Peng He <xnhp0320@icloud.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tiwei Bie [Mon, 19 Aug 2019 11:34:56 +0000 (19:34 +0800)]
vhost: fix vring address handling during live migration
When live migration starts, QEMU will set ring addrs again for
each virtqueue. In this case, we should try to translate ring
addrs after we invalidating the ring, otherwise virtqueues can
be enabled with the addrs untranslated. Besides, also leverage
the access_ok flag in non-IOMMU case to prevent the data path
accessing invalidated virtqueues.
Fixes: 5a4933e56be4 ("vhost: postpone ring address translations at kick time only") Cc: stable@dpdk.org Reported-by: Yilong Lv <lvyilong.lyl@alibaba-inc.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tiwei Bie [Mon, 19 Aug 2019 11:34:55 +0000 (19:34 +0800)]
vhost: forbid reallocation when running
When the device has been started, don't do the reallocation anymore.
Otherwise the pointers used in application threads can be invalidated
without proper protection. Instead of introducing a global lock to
protect the change of device pointers which will hurt the performance,
let's just do the reallocation during setup.
Fixes: af295ad4698c ("vhost: realloc device and queues to same numa node as vring desc") Cc: stable@dpdk.org Reported-by: Yinan Wang <yinan.wang@intel.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jim Harris [Tue, 24 Sep 2019 09:23:34 +0000 (02:23 -0700)]
vhost: add missing experimental flag
This function is listed under EXPERIMENTAL in the
rte_vhost_version.map, so it needs to be marked
with __rte_experimental in the header file as well.
Found by check-experimental-syms.sh when trying to compile
DPDK with -finstrument-functions. This script didn't
catch this in the normal case, since the function is
declared __rte_always_inline.
This also requires updating the vhost_scsi example to allow
use of this newly marked experimental API.
Signed-off-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds multiple process support for hns3 PMD driver.
Multi-process support selection queue by configuring RSS or
flow director. The primary process supports various management
ops, and the secondary process only supports queries ops.
The primary process notifies the secondary processes to start
or stop tranceiver.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds dev_start, dev_stop, dev_configure, promiscuous_enable,
promiscuous_disable, allmulticast_enable, allmulticast_disable,
dev_infos_get related function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current version, we only support VF device is bound to vfio_pci or
igb_uio and then driven by DPDK driver when PF is driven by kernel mode
hns3 ethdev driver, VF is not supported when PF is driven by DPDK
driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for MAC PAUSE flow control and priority flow
control(PFC).
MAC PAUSE flow control features:
All user priorities(up) are mapped to tc0. It supports settings of flow
mode and pause time.
DCB features:
Up can be mapped to other tc driver permits according to business
requirement. We can config DCB information and enable PFC by
rte_eth_dev_configure interface. Besides, enabling flow control of a
priority is supported by rte_eth_dev_priority_flow_ctrl_set interface.
we can also set flow mode and pause time by
rte_eth_dev_priority_flow_ctrl_set. we do not support manual setting of
ETS, but driver equally distributes bandwidth for each tc according to
number of used tc.
In addition, flow control function by default is turned off to ensure
that app startup state is the same each time.
Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for rte_flow_ops operation and flow
director of hns3 PMD driver.
Flow director feature is only supported in hns3 PF driver.
It supports the network L2\L3\L4 and tunnel packet creation,
deletion, flushing, and querying hit statistics.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following mac address related operations defined in
struct eth_dev_ops: mac_addr_add, mac_addr_remove, mac_addr_set
and set_mc_addr_list.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the initialization of hns3 PF PMD driver. It gets
configuration from IMP such as queue information, configures queue,
inits mac, inits manage table, disables gro etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Haiyue Wang [Tue, 24 Sep 2019 02:38:06 +0000 (10:38 +0800)]
net/ice: support protocol extraction per Rx queue
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for IPv6 traffic class (tc) field for switch rule.
Correct ice_ipv6_hdr based on the IPv6 Protocol using bitfields.
Add big/little endian convert for tc field before it is inserted,
since tc is only one byte and also does not have a byte-aligned
offset.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, IPv4 and UDP inner hash rule will be over
written by later rules after RSS initialization phase. This is
because the PTYPE bitmap table cover some PTYPEs belong to another
PTGs. And some PTYPEs are reserved. Remove these PTYPEs in TCP,
UDP, SCTP and ipv4 bitmap table.
Fixes: aa1cd410fa64 ("net/ice/base: add flow module") Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_cp_bitmap() already exists and should be used instead of
using ice_memcpy(). Note, there are a couple comments that suggest
using a bitmap-specific copy function, but those are not correct
since the source block of memory is not a bitmap.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove the error log message when attempting to download a
package that has an unsupported version.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: fix 4 bytes alignment for PPPoE dummy packet
Add two bytes to meet the requirement of 4 bytes alignment for dummy
packet for creating switch rule for PPPoE.
Fixes: d1c2f76b440a ("net/ice/base: support GTP and PPPoE protocols") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: search field vector indices for result slots
Previously, switch code would use only pre-reserved index
slots at the end of each field vector for recipe result index
locations. This patch adds code that detects other internal
empty index slots that could potentially be used. For each
recipe that is added, a determ ination is made as to whether
any of these additional index slots alige with all the profiles
selected for the recipe; if alignment is achieved, then these
result index slots can be used.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: fix segment in remove existing RSS rule
Before this patch, RSS tunneled rules can not be destroyed at runtime.
This is because it can not find the existing matching profile for tunnels.
segs[0] should always be zero and all matched, segs[1] for inner part.
It only construct one segment.
This patch modifies construct segment in ice_rem_rss_cfg_sync() to
match ice_add_rss_cfg_sync().
Fixes: b7d34ccc47b5 ("net/ice/base: packet encapsulation for RSS") Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, if set rule for IPv4 first and then set rule
for TCP with IPv4. The first rule for inner IP will be overwritten
by TCP rule. This is because MAC_IPV6_TUN_MAC_IPV4_PAY using the
same ptgs PTG_TUN_INNER_IPV4_OTHER with MAC_IPV4_TUN_MAC_IPV4_PAY,
this ptype should not in TCP bitmap.
Remove this bit in TCP bitmap.
Fixes: aa1cd410fa64 ("net/ice/base: add flow module") Cc: stable@dpdk.org Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add GTPU qfi field support for flow director. Note that for GTPU pkt,
only qfi field (6 bits) can be set for FD. The supported GTPU pkts are
defined as:
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_UDP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_TCP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_ICMP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_OTHER (FRAG and PAY belong to this)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: replace alloc-followed-by-copy with memdup
ice_memdup() is preferred over an alloc immediately followed by a copy.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add parameter "symm" to rss configuration APIs.
When symm is 1, Symmetric Teoplitz Hash can be enabled by
configuring GLQF_HSYMM properly.
NOTE:
Symmetric Teoplitz hash will work only if hash schema of
VSIQF_HASH_CTL be configured to 01b and it is assumed be enabled
in PMD.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Update FW API minor version to align to current value advertised
by FW in NVM images.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: support destination MAC field for FDIR
Add dest MAC address support so that this field can be matched when
we set Flow Director filter with dst addr for MAC.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable getting value from input to set up flow director counters,
so that the FDIR counters can count none, packets only, bytes only
or both packets and bytes as demanded.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add two ptypes(MAC_PPPOE_IPV4_SCTP and MAC_PPPOE_IPV6_SCTP) in
sctp ptype bitmap to enable rss.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Properly associate switch recipes to profiles. Previous code was
using the wrong bitfield for updating the associations, which was
causing other PFs to not properly identify and use existing
recipes. This sometimes resulted in rules not being added when it
should have been possible.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
When declaring the ice_prot_ext, and ice_prot_id_tbl structure,
we can use a fixed length array instead of a variable length one
which helps us catch future code changes that might desynchronize
the enum ice_protocol_type and the structs. This change also
necessitates removing the last member of the structs which was
just there to be a placeholder.
Also reorder the ice_prot_ext struct to match the ordering in the
associated enum ice_protocol_type.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: support switch rule about VLAN PPPoE
Add support for switch rule about single-VLAN-PPPoE. Note that double
VLAN is not supported by the hardware at this point, therefore only
single-VLAN support for PPPoE is added.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
The DPDK PF doesn't support SRIOV so remove the related iavf host
code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
The code in ice_sched_cleanup_all checks whether the port info is NULL
prior to calling ice_sched_clear_port.
More importantly, it also checks whether the port structure has been
initialized by checking its port_state field as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
git.droids-corp.org / dpdk.git / log