net/bnxt: add VXLAN decap templates

Templates for outer tunnel & inner tunnel flow are added in this patch.
This will be used by subsequent patches to implement support for
VXLAN decap rte_flow offload.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: refactor flow id allocation

Currently, the flow id is allocated inside ulp_mapper_flow_create.
However with vxlan decap feature if F2 flow comes before F1 flow
then F2 is cached and not really installed in the hardware which
means the code will return without calling ulp_mapper_flow_create.
But, ULP has to still return valid flow id to the stack.
Hence, move the flow id allocation outside ulp_mapper_flow_create.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add mapper support for wildcard TCAM

Added support for the key and mask fields encoding for the
wildcard TCAM entry. Also add internal function to post process
the key/mask blobs for wildcard TCAM table. The size of the
wildcard TCAM slice is 80 bytes.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify HWRM command to create reps

Use cfa pair alloc for configuring reps.
Instead of cfa_vfr_alloc for Wh+ and cfa_pair_alloc for Stingray,
converge to cfa_pair_alloc/free for both devices. Set the command
request structure bits accordingly.
As part of this, remove the old cfa_vfr_alloc cmd definitions as FW
has deprecated support for those commands.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add hierarchical flow counters

Add support for hierarchical flow counter accumulation.
In case of hierarchical flows, involving parent and child flows,
the child flow counters are aggregated to get the parent flow counter
information. This should help in cases where one ore more flows
is related to a previously offloaded flow.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix flow query count

Fix infinite loop in flow query count.
`nxt_resource_idx` could be zero in some cases which is invalid and
should be part of the while loop condition. Also synchronize access to
the flow db using the fdb_lock

Fixes: 306c2d28e247 ("net/bnxt: support count action in flow query")

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update ULP resource counts

Update ULP resource counts for Stingray device.
- FW needs some resources for normal operation. Account those
in the resource manager.
- Update the SR ULP requested resource counts to reflect
those available after AFM resources are accounted for.
- Add build option to select either 2 or 4 slot EM entries.
The default is 4 slot entries.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add table scope to PF mapping

Add table scope to PF Mapping for SR and Wh+ devices.
Legacy devices require PF set of base addresses for EEM operation.
A table scope id is a logical construct and is mapped to the PF
associated with the communications channel used.
In the case of a VF, the parent PF is used.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support two table scopes

Adding support for two table scopes. One for Exact Match tables
and other for External Exact Match tables.
New API to map a PARIF to an EEM table scope (set of Rx and Tx EEM
base addresses). It uses HWRM_TF_GLOBAL_CFG_SET HWRM to configure.
PARIF is handler to a partition of the physical port.
Adjustments to tf_global_cfg_set() to reduce overhead and nominal
name clarification.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add Stingray support to core layer

- Moved P4 chip specific code under the P4 directory
- Added P45 skeleton code for SR to build on
- Add SR support in TRUFLOW core layer.
The TRUFLOW core or the tf-core is a shim layer which communicates with
the CFA block in the hardware.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/ice/base: update version

Update base code version in readme.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: specify global RSS LUT id in get/set RSS LUT

There is no way to specify a global RSS lookup table (LUT) ID with the
current API and 0 is the only global LUT ID that can be supported since
it's hard coded.
Upcoming support to specify a global LUT ID will require this
flexibility. To fix this, update the API for ice_aq_get_rss_lut() and
ice_aq_set_rss_lut() to take the new structure
ice_aq_get_set_rss_params, which includes a global_lut_id member. A new
structure was introduced instead of adding another parameter to the
previously mentioned functions for 2 reasons:

1. Reduce the number of parameters passed to the functions.
2. Reduce the amount of change required if the arguments ever need to be
   updated in the future.

Also, reduce duplicate code that was checking for an invalid vsi_handle
and lut parameter by moving the checks to the lower level
__ice_aq_get_set_rss_lut().

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: refactor RSS configure API

Use struct ice_rss_hash_cfg as parameter for
ice_add_rss_cfg, ice_add_rss_cfg_sync and
ice_rem_rss_cfg, ice_rem_rss_cfg_sync.

Introduce enmu ice_rss_cfg_hdr_type to allow user specify the more
flexible RSS configure.

ICE_RSS_OUTER_HEADERS - take outer layer as RSS inputset
ICE_RSS_INNER_HEADERS - take inner layer as RSS inputset
ICE_RSS_INNER_HEADERS_W_OUTER_IPV4
- take inner layer as RSS inputset for packet with outer IPV4
ICE_RSS_INNER_HEADERS_W_OUTER_IPV6
- take inner layer as RSS inputset for packet with outer IPV6
ICE_RSS_ANY_HEADERS - try with outer first then inner
(same as the behaviour without this change)

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: use macro to get variable size array length

Use the FLEX_ARRAY_SIZE() helper with the recently added flexible array
members in structures.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove duplicated AQ command flag setting

When sending the indirect Read/Write SFF EEPROM AQ command. The flag is
already added later in the code flow for all indirect AQ commands, i.e.
commands that provide an additional data buffer.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support extended GPIO access

Added two new admin commands called: SW Set GPIO and SW Get GPIO
(0x6EF and 0x6F0 respectively) which extends GPIO handling
capabilities by SW driver

Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix parameter name in comment

Fix parameter name for cookie_high and cookie_low.

Fixes: a90fae1d0755 ("net/ice/base: add admin queue structures and commands")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: recognize 860 as iSCSI port in CEE mode

iSCSI can use both TCP ports 860 and 3260. However, in our current
implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command
doesn't provide a way to communicate the protocol port number to the
AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the
AQ's caller layer.

In this patch, we will rely on the dcbx-willing mode, desired QOS and
remote QOS configuration to determine which port number that iSCSI will
use.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: implement shared rate limiter

Implemented shared bandwidth rate limit functionality to account for
dedicated bandwidth and minimum bandwidth. It requires non default
profile be programmed for CIR, EIR/PIR, and SRL.

Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: return error directly

As there is nothing to unroll, return the error directly. Remove the
label as this is the only reference to that label.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support class 5+ modules

Currently QSFP/SFP modules up to power class 4 are supported.
100G modules require higher power in many cases.
Also, low power mode requires support of power classes 7 and even 8.

This change extends "Get Link Status" AQ command (0x0607) to
support class 5+ modules.

The patch also add couple other missing bits for link status.

Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: use malloc instead of calloc

Use *malloc() instead of *calloc() when allocating only a single object
as opposed to an array of objects.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: use package info from ice segment metadata

There are two package versions in the package binary. Today, these two
version numbers are the same. However, in the future that may change.

Update code to use the package info from the ice segment metadata
section, which is the package information that is actually downloaded to
the firmware during the download package process.

Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add more capability to admin queue

Add below 3 new capability to "Get Capabilities" AQ commands
0x000A and 0x000B.

ICE_AQC_CAPS_IWARP
ICE_AQC_CAPS_PCIE_RESET_AVOIDANCE
ICE_AQC_CAPS_NVM_MGMT

Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: allocate and free RSS global lookup table

Currently there is no API to allocate and free a RSS global LUT.
Incoming changes to support VFs having >16 queues will require using
RSS global LUT resources. The functions included will allow a PF to
configure a RSS global LUT for VFs that request >16 queues.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: read security revision

The main NVM module and the Option ROM module contain a security
revision in their CSS header. This security revision is used to
determine whether or not the signed module should be loaded at bootup.
If the module security revision is lower than the associated minimum
security revision, it will not be loaded.

The CSS header does not have a module id associated with it, and thus
requires flat NVM reads in order to access it. To do this, take
advantage of the cached bank information. Introduce a new
"ice_read_flash_module" function that takes the module and bank to read.
Implement both ice_read_active_nvm_module and
ice_read_active_orom_module. These functions will use the cached values
to determine the active bank and calculate the appropriate offset.

Using these new access functions, extract the security revision for both
the main NVM bank and the Option ROM into the associated info structure.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move sched function prototypes

These functions reside in ice_sched.c but the function protypes are
declared in ice_common.h. Move the function prototypes to ice_sched.h.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: rename ptype bitmap

Align all ptype bitmap to follow ice_ptypes_xxx prefix.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: modify ptype bitmap for outer MAC

Add below ptypes into ice_ptypes_mac_ofos:

MAC_IPV4[6]_ESP
MAC_IPV4[6]_AH
MAC_IPV4[6]_NAT_T_ESP
MAC_IPV4[6]_NAT_T_IKE
MAC_IPV4[6]_NAT_T_KEEP
MAC_IPV4[6]_PFCP_NODE
MAC_IPV4[6]_PFCP_SESSION
MAC_IPV4[6]_L2TPV3

So above ptype can also be selected by a filter when outer mac header
is required.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add NVM write response flags

Added NVM Write Admin Command (0x703) ARQ response flags - as
returned in "Response flags" field.
Three flags are supported: POR, PERST and EMPR. All indicate the
type of reset required to get the NVM bank update effective.

Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support tunnel for flow director

Add struct to store outer part for tunnel rule.
Add vxlan ptype in ipv4 mac bitmap. So when create a vxlan rule, the
ptype group will be valid.

Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice: show RSS hash configuration

Implement interface 'ice_rss_hash_conf_get' to support show RSS
hash configuration.

Note:
Only return rss_hf from latest dev_configure or dev_rss_hash_update.
All configures from rte_flow are ignored.

Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: enable AVX512 for Tx

To enhance the per-core performance, this patch adds some AVX512
instructions to the data path to handle the Tx descriptors.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: enable AVX512 for flexible Rx

To enhance the per-core performance, this patch adds some AVX512
instructions to the data path to handle the flexible Rx descriptors.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: enable AVX512 for legacy Rx

To enhance the per-core performance, this patch adds some AVX512
instructions to the data path to handle the legacy Rx descriptors.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix DCF crash on Rx

The initialization of selecting the handler for scalar Rx path FlexiMD
fields extraction into mbuf is missed, it will cause segmentation fault
(core dumped).

Also add the missed support to handle RXDID 16, which has RSS hash value
on Qword 1.

Fixes: 7a340b0b4e03 ("net/ice: refactor Rx FlexiMD handling")
Cc: stable@dpdk.org
Reported-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix Rx offload flags in SSE path

Update reading offload flags of last two of four packets.

Fixes: 1162f5a0ef31 ("net/iavf: support flexible Rx descriptor in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

doc: fix a typo in flow API guide

flow_type_rss_offloads was misspelt as flow_tpe_rss_offloads

Fixes: 6abee736abe6 ("doc: update RSS flow action with best effort")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

ethdev: move non-offload capabilities

The definitions of RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP
and RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP were inserted
before the last comment of Tx offloads.

It is moved in a better place,
with comments moved to be before the definition.
A group comment is added to better describe device capabilities.

Fixes: cac923cfea47 ("ethdev: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

net/ice: fix Rx offload flags in SSE path

Update reading offload flags of last two of four packets.

Fixes: ece1f8a8f1c8 ("net/ice: switch to flexible descriptor in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix flow director for eth + VLAN pattern

Currently, can't create more than one following flow for
ETH + VLAN pattern.

1. flow create 0 ingress pattern eth / vlan vid is 350 / end
   actions queue index 2 / end
2. flow create 0 ingress pattern eth / vlan vid is 351 / end
   actions queue index 3 / end

The root cause is the vlan_tci is not set correctly, it will
cause the keys of both of the two flows are the same.

Fixes: 42044b69c67d ("net/i40e: support input set selection for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/txgbe: add Tx done cleanup

Add support for API rte_eth_tx_done_cleanup().

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx descriptor status

Supports check the status of Rx and Tx descriptors.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: add Rx buffer split limitation to mlx5 guide

The buffer split feature is mentioned in the mlx5 PMD
documentation, the limitation is description is added
as well.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: report Rx buffer split capabilities

Add rte_eth_dev_info->rx_seg_capa parameters:
  - receiving to multiple pools is supported
  - buffer offsets are supported
  - no offset alignment requirement
  - reports the maximal number of segments
  - reports the buffer split offload flag

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: support Rx buffer split on datapath

Only the regular rx_burst routine is updated to support split,
because the vectorized ones does not support scatter and MPRQ
does not support split at all.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: register multiple pool for Rx queue

The split feature for receiving packets was added to the mlx5
PMD, now Rx queue can receive the data to the buffers belonging
to the different pools and the memory of all the involved pool
must be registered for DMA operations in order to allow hardware
to store the data.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: configure Rx queue for buffer split

The scatter-gather elements should be configured
accordingly to support the buffer split feature.
The application provides the desired settings for
the segments at the beginning of the packets and
PMD pads the buffer chain (if needed) with attributes
of last specified segment to accommodate the packet
of maximal length.

There are some limitations are implied. The MPRQ
feature should be disengaged if split is requested,
due to MPRQ neither supports pushing data to the
dedicated pools nor follows the flexible buffer sizes.
The vectorized rx_burst routines does not support
the scattering (these ones are extremely simplified
and work over the single segment only) and can't
handle split as well.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: support Rx buffer split description

The routine to provide Rx queue setup with specifying
extended receiving buffer description is added.
It allows application to specify desired segment
lengths, data position offsets in the buffer
and dedicated memory pool for each segment.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: implement tunnel offload

Tunnel Offload API provides hardware independent, unified model
to offload tunneled traffic. Key model elements are:
 - apply matches to both outer and inner packet headers
   during entire offload procedure;
 - restore outer header of partially offloaded packet;
 - model is implemented as a set of helper functions.

Implementation details:
* tunnel_offload PMD parameter must be set to 1 to enable the feature.
* application cannot use MARK and META flow actions with tunnel.
* offload JUMP action is restricted to steering tunnel rule only.

Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: support shared action for RSS

Implement shared action create/destroy/update/query. The current
implementation support is limited to shared RSS action only. The shared
RSS action create operation prepares hash RX queue objects for all
supported permutations of the hash.  The shared RSS action update
operation relies on functionality to modify hash RX queue introduced in
one of the previous commits in this patch series.

Implement RSS shared action and handle shared RSS on flow apply and
release. The lookup for hash RX queue object for RSS action is limited
to the set of objects stored in the shared action itself and when
handling shared RSS action. The lookup for hash RX queue object inside
shared action is performed by hash only.

Current implementation limited to DV flow driver operations i.e. verbs
flow driver operations doesn't support shared action.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: translate shared action for RSS action

Handle shared action on flow validation/creation/destruction.
mlx5 PMD translates shared action into a regular one before handling
flow validation/creation. The shared action translation applied to
utilize the same execution path for both shared and regular actions.
The current implementation supports shared action translation for shared
RSS action only.

RSS action validation split to validate shared RSS action on its
creation in addition to action validation in flow validation/creation
path.

Implement rte_flow shared action API for mlx5 PMD, mostly forwarding
calls to flow driver operations (see struct mlx5_flow_driver_ops).

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: modify hash Rx queue objects

Implement modification for hashed table of Rx queue object (see
mlx5_hrxq_modify()). This implementation relies on the capability to
modify TIR object via DevX API, i.e. current implementation doesn't
support verbs HW object operations. The functionality to modify hashed
table of Rx queue object is prerequisite to implement
rete_flow_shared_action_update() for shared RSS action in mlx5 PMD.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

common/mlx5: modify advanced Rx object via DevX

Implement TIR modification (see mlx5_devx_cmd_modify_tir()) using DevX
API. TIR is the object containing the hashed table of Rx queue. The
functionality to configure/modify this HW-related object is prerequisite
to implement rete_flow_shared_action_update() for shared RSS action in
mlx5 PMD. HW-related structures for TIR modification add in mlx5_prm.h.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/bnxt: update PMD supported features

Mark "BSD nic_uio", "Usage doc", and "Perf doc" as supported
for the bnxt PMD.

Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: use shorter SIMD initializers

Make SIMD initialization code less verbose by using appropriate
intrinsics when all lanes of a vector are initialized to the
same value.

Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix boolean operator usage

Use boolean AND operator instead of bitwise operator.

Coverity issue: 323488
Fixes: b42c15c83e88 ("net/bnxt: support trusted VF")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/ice: update writeback policy to reduce latency

Just like iavf, setting the value to 2us allows for generally good
streaming packet performance while keeping latency down, and
generally keeps the performance of the PF and VF interfaces similar.

The previous value of 0x10 was making latency on a single packet
receive be as much as 16us.

Fixes: 65dfc889d86b ("net/ice: support Rx queue interruption")
Cc: stable@dpdk.org
Reported-by: Brian Johnson <brian.johnson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix performance with writeback policy

The iavf driver was trying to use writeback on ITR, but was
never setting an ITR, so it didn't work. This caused performance
to be limited due to too much PCIe traffic and partial writes
during most benchmarking workloads.
Set the ITR during queue setup, which can be checked at runtime
by reading register 0x2800. Setting the value to 2us allows
for generally good streaming packet performance while keeping
latency down.

Fixes: d6bde6b5eae9 ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Reported-by: Brian Johnson <brian.johnson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

raw/ifpga/base: enhance driver reliability in multi-process

Current hardware protection is based on pthread mutex which
work just for situation of multi-thread in one process. In
multi-process environment, hardware state machine would be
corrupted by concurrent access, that means original pthread
mutex mechanism need be enhanced.

The major modifications in this patch are list below:
1. Create a mutex for adapter in shared memory named
   "mutex.IFPGA:domain:bus:dev.func" when device is probed.
2. Create a shared memory named "IFPGA:domain:bus:dev.func" during opae
   adapter is initializing. There is a reference count in shared memory.
   Shared memory will be destroyed once reference count turned to zero.
3. Two mutexs are created in shared memory and initialized with flag
   PTHREAD_PROCESS_SHARED. One for SPI and the other for I2C. They will
   be passed to SPI and I2C driver subsequently.
4. DTB data in flash will be cached in shared memory. Then MAX10 driver
   can read DTB from shared memory instead of flash. This avoid
   confliction of concurrent flash access between hardware and software.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: free resources when destroying device

Add two functions to complete the resource free work, one is
'ifpga_adapter_destroy()', the other is 'ifpga_bus_uinit()'.

Then call 'opae_adapter_destroy()' and 'opae_adapter_data_free()'
in 'ifpga_rawdev_close()' to free resources.

Also 'opae_adapter_free()' is removed from 'ifpga_rawdev_destroy()',
because opae adapter is pointed by dev_private member in raw_dev,
it will be freed in 'rte_rawdev_pmd_release()'.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: fix return of IRQ unregister

Since 'rte_intr_callback_unregister()' can return positive
value as success, but 'ifpga_rawdev_destroy()' handle it as
an error.

Instead, only negative return is treated as failure.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: handle unsupported interrupt type

Handle unsupported interrupt type requests properly,
on unsupported interrupt case:
'ifpga_unregister_msix_irq()' returns success,
'ifpga_register_msix_irq()' return failure.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: fix interrupt handler instance usage

Interrupt handler copied to the local 'intr_handle' variable by value
before passing it to IRQ functions.
This leads IRQ functions update the local variable instead of
'ifpga_irq_handle'.

Instead, using 'intr_handle' local variable as pointer to
'ifpga_irq_handle' as intended.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

net/txgbe: support DCB info get

Add DCB information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support PTP

Add PTP support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device LED on and off

Support device LED on and off.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support register dump

Add register dump support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support EEPROM info get

Add EEPROM information get related operations.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support getting FW version

Add firmware version get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support MTU set

Add MTU set operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add device promiscuous and allmulticast mode

Add device promiscuous and allmulticast mode.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support priority flow control

Add priority flow control support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support FC auto negotiation

Add flow control negotiation with link partner.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support flow control

Add flow control support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support DCB

Add DCB transmit and receive mode configurations,
and allocate DCB packet buffer.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support RSS

Add RSS configure, support to RSS hash and reta operations for PF.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add VMDq configure

Add multiple queue setting with VMDq.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PF module configure for SRIOV

Add PF module configure for SRIOV.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add process mailbox operation

Add check operation for vf function level reset,
mailbox messages and ack from vf.
Waiting to process the messages.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PF module init and uninit for SRIOV

Add PF module init and uninit operations with mailbox.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add SWFW semaphore and lock

Add semaphore between software and firmware.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support VLAN

Add VLAN filter, tpid, offload and strip set support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add queue stats mapping

Add queue stats mapping set, and clear hardware counters.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device xstats

Add device extended stats get from reading hardware registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device statistics

Add device stats get from reading hardware registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx queue info get

Add Rx and Tx queue information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Rx interrupt

Support rx queue interrupt.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device stop and close

Add device stop, close and reset operations.
And support hardware thermal sensor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx data path start and stop

Add receive and transmit data path start and stop.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device start

Add device start operation with hardware start and reset.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Rx

Fill receive functions and define receive descriptor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Tx prepare

Fill transmit prepare function.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Tx with hardware offload

Fill transmit function with hardware offload.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support simple Tx

Fill simple transmit function and define transmit descriptor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support packet type

Add packet type marco definition and convert ptype to ptid.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx start and stop

Add receive and transmit units start and stop for specified queue.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx queues setup and release

Add receive and transmit queues setup and release.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx init

Add receive and transmit initialize unit.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add unicast hash bitmap

Add unicast hash bitmap.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>