net/bnxt: fill mapper parameters with default rules

Default rules are needed for the packets to be punted between the
following entities in the non-offloaded path
1. Device PORT to DPDK App
2. DPDK App to Device PORT
3. VF Representor to VF
4. VF to VF Representor

This patch fills all the relevant information in the computed fields
& the act_prop fields for the flow mapper to create the necessary
tables in the hardware to enable the default rules.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: parse representors along with other devargs

Representor dev-args need to be parsed during pci probe as they determine
subsequent probe of VF representor ports as well.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: manage VF to VFR conduit

When VF-VFR conduits are created, a mark is added to the mark database.
mark_flag indicates whether the mark is valid and has VFR information
(VFR_ID bit in mark_flag). Rx path was checking for this VFR_ID bit.
However, while adding the mark to the mark database, VFR_ID bit is not
set in mark_flag.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: enhance port DB

1. Add "enum bnxt_ulp_intf_type” as the second parameter for the
   port & func helper functions
2. Return vfrep related port & func information in the helper functions
3. Allocate phy_port_list dynamically based on port count
4. Introduce ulp_func_id_tbl array for book keeping func related
   information indexed by func_id

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: enable port MAC qcfg command for trusted VF

Issue HWRM_PORT_MAC_QCFG command on trusted vf to fetch the port count.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support conditional execution of mapper tables

Added support for conditional execution of the mapper tables so that
actions like count will have table processed only if action count
is configured.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support internal exact match entries

Added support for the internal exact match entries.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support global resource templates

Added support for the global resource templates, so that they
can be reused by the other regular templates.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add index opcode and operand to mapper table

Extended the regfile and computed field operations to a common
index opcode operation and added globlal resource operations are
also part of the index opcode operation.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: disable Tx vector mode on TruFlow

The vector mode in the tx handler is disabled when truflow is
enabled since truflow now requires bd action record support.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support IF table processing

Added support for if table processing in the ulp mapper
layer. This enables support for the default partition action
record pointer interface table.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support internal encap records

Modifications to allow internal encap records to be supported:
- Modified the mapper index table processing to handle encap without an
  action record
- Modified the session open code to reserve some 64 Byte internal encap
  records on tx
- Modified the blob encap swap to support encap without action record

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: integrate with the latest TF core changes

ULP changes to integrate with the latest session open
interface in tf_core

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support EEM system memory

- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: add global config set and get functions

- Add support to update global configuration for ACT_TECT
  and ACT_ABCR.
- Add support to allow Tunnel and Action global configuration.
- Remove register read and write operations.
- Remove the register read and write support.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add TF register and unregister

- Add TF register/unregister support. Session got session clients to
  keep track of the ctrl-channels/function.
- Add support code to tfp layer

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: implement IF tables set and get

- Implement set/get for PROF_SPIF_CTXT, LKUP_PF_DFLT_ARP,
  PROF_PF_ERR_ARP with tunneled HWRM messages
- Add IF table for PROF_PARIF_DFLT_ARP
- Fix page size offset in the HCAPI code
- Fix Entry offset calculation

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: align CFA resources with RM

- HCAPI resources need to align for Resource Manager
- Clean up unnecessary debug messages

Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add external action allocate and free

- Link external action alloc and free to new hcapi interface
- Add parameter range checking
- Fix issues with index allocation check

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove table scope from session

- Remove table scope data from session. Added to EEM.
- Complete move to RM of table scope base and range.
- Fix some err messaging strings.
- Fix the tcam logging message.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update RM to support HCAPI only

- For the EM Module there is a need to only allocate the EM Records in
  HCAPI RM but the storage control is requested to be outside of the RM
  DB.
- Add TF_RM_ELEM_CFG_HCAPI_BA.
- Return error when the number of reserved entries for wc tcam is odd
  number in tf_tcam_bind.
- Remove em_pool from session
- Use RM provided start offset and size
- HCAPI returns entry index instead of row index for WC TCAM.
- Move resource type conversion to hrwm set/free tcam functions.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update table get to use new design

- Move bulk table get implementation to new Tbl Module design.
- Update messages for bulk table get
- Retrieve specified table element using bulk mechanism
- Remove deprecated resource definitions
- Update device type configuration for P4.
- Update RM DB HCAPI count check and fix EM internal and host
  code such that EM DBs can be created correctly.
- Update error logging to be info on unbind in the different modules.
- Move RTE RSVD out of tf_resources.h

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support EM and TCAM lookup with table scope

- Support for table scope within the EM module
- Support for host and system memory
- Update TCAM set/free.
- Replace TF device type by HCAPI RM type.
- Update TCAM set and free for HCAPI RM type

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support two-level priority for TCAMs

Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update RM with residual checker

- Add residual checker to the TF Host RM as well as new RM APIs. On
  close it will scan the DB and check of any remaining elements. If
  found they will be logged and FW msg sent for FW to scrub that
  specific type of resources.
- Update the module bind to be aware of the module type, for each of
  the modules.
- Add additional type 2 string util functions.
- Fix the device naming to be in compliance with TF.
- Update the device unbind order as to assure TCAMs gets flushed
  first.
- Update the close functionality such that the session gets
  closed after the device is unbound.

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update identifier with remap support

- Add Identifier L2 CTXT Remap to the P4 device and updated the
  cfa_resource_types.h to get the type support.

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support multiple device

Implement the Identifier, Table Type and the Resource Manager
modules.
Integrate Resource Manager with HCAPI.
Update open/close session.
Move to direct msgs for qcaps and resv messages.

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support TCAM access

Implement TCAM alloc, free, bind, and unbind functions
Update tf_core, tf_msg, etc.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add core changes for EM and EEM lookups

- Move External Exact and Exact Match to device module using HCAPI
  to add and delete entries
- Make EM active through the device interface.

Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support HCAPI interface

Add new hardware shim APIs to support multiple
device generations

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support two-level priority for TCAMs

Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.

Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update multi device design

- Implement the modules RM, Device (WH+), Identifier.
- Update Session module.
- Implement new HWRMs for RM direct messaging.
- Add new parameter check macro's and clean up the header includes for
  i.e. tfp such that bnxt.h is not directly included in the new modules.
- Add cfa_resource_types, required for RM design.

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support bulk table get and mirror

- Add new bulk table type get using FW
  to DMA the data back to host.
- Add flag to allow records to be cleared if possible
- Set mirror using tf_alloc_tbl_entry

Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support multi device

Introduce new modules for Device, Resource Manager, Identifier,
Table Types, and TCAM for multi device support.

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: use HWRM direct for exact match insert and delete

Modify Exact Match insert and delete to use the HWRM messages directly.
Remove tunneled EM insert and delete message types.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support exact match

- Add Exact Match support
- Create EM table pool of memory indices
- Insert exact match internal entry API
- Sends EM internal insert and delete request to firmware

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify port DB to handle more info

Apart from func_svif, func_id & vnic, port_db now stores and
retrieves func_spif, func_parif, phy_port_id, port_svif, port_spif,
port_parif, port_vport. New helper functions have been added to
support the same.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support HWRM port PHY qcaps

Issue HWRM_PORT_PHY_QCAPS to the firmware to get the physical
port count of the device.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: get port and function info

add helper functions to get port & function related information
like parif, physical port id & vport id.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify port DB dev interface

Modify ulp_port_db_dev_port_intf_update prototype to take
"struct rte_eth_dev *" as the second parameter.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: initialize parent PF information

Add support to query parent PF information (MAC address,
function ID, port ID and default VNIC) from firmware.

Current firmware returns zero for parent default vnic,
a temporary Wh+-specific workaround is included until
that can be fixed.

Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: get IDs for port representor endpoint

Use 'first_vf_id' and the 'vf_id' that is input as part of adding
a representor to obtain the PCI function ID(FID) of the VF(VFR endpoint).
Use the FID as an input to FUNC_QCFG HWRM cmd to obtain the default
vnic ID of the VF.
Along with getting the default vNIC ID by supplying the FW FID of
the VF-rep endpoint to HWRM_FUNC_QCFG, obtain and store it's
function svif.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support port representor data path

Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add port representor infrastructure

Defines data structures and code to init/uninit
VF representors during pci_probe and pci_remove
respectively.
Most of the dev_ops for the VF representor are just
stubs for now and will be will be filled out in next patch.

To create a representor using testpmd:
testpmd -c 0xff -wB:D.F,representor=1 -- -i
testpmd -c 0xff -w05:02.0,representor=[1] -- -i

To create a representor using ovs-dpdk:
1. First add the trusted VF port to a bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0
2. Add the representor port to the bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0,representor=1

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

maintainers: update for vmbus

Add Long Li as additional maintainer.

Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

maintainers: update for netvsc

Add Long Li as additional maintainer.

Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

maintainers: update for Netcope sze/nfb

Setting Martin Spinler as new and only maintainer for Netcope
libsze2/nfb drivers

Signed-off-by: Jakub Neruda <neruda@netcope.com>
Acked-by: Martin Spinler <spinler@cesnet.cz>

net/mlx5: fix flow META item validation

When flow is inserted with meta match item it requires a certain
register support.
As part of the flow validation of such flows, the validation
function is missing a check that the mlx5 driver is not in
legacy mode in terms of extended meta data support
(MLX5_XMETA_MODE_LEGACY flag).
If the driver is in legacy mode it will cause downstream
function that allocates needed register for meta data.

The fix checks explicitly the conditions for support of
meta data in FDB mode. If the conditions are not met
an error message will be issued.

Fixes: 9bf26e1318e3 ("ethdev: move egress metadata to dynamic field")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/ice: fix typo on variable name

fix typo of "valid".

Fixes: 8f5d8e74fb38 ("net/ice: support flow for AH ESP and L2TP")
Fixes: 66ff8851792f ("net/ice: support ESP/AH/L2TP")
Fixes: 45b53ed3701d ("net/ice: support IPv6 NAT-T")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: add input set byte number check

This patch add the total input set byte number check,
as there is a hardware requirement for the total number
of 32 byte.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support switch flow for specific L4 type

This patch add more specific tunnel type for ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for the switch filter rule.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix tunnel type for switch rule

This patch add check for protocol type of IPv4 packet,
it need to update tunnel type when NVGRE is in payload.

Fixes: 6bc7628c5e0b ("net/ice: change default tunnel type")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support more PPPoE packet type for switch

This patch add more support for switch parser of PPPoE packet,
it enable parse tcp/udp L4 layer and ipv4/ipv6 L3 layer parser for
PPPoE payload, so we can use L4 dst/src port and L3 ip address as
input set for switch filter PPPoE related rule.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix build with 16-byte Rx descriptor in DCF

Fix the build error in DCF when CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC
compilation option is enabled. Legacy 16 byte Rx descriptor is not
supported in DCF. If it is enabled, DCF configuration stops.

Fixes: 929eceefaba7 ("net/ice: add queue start and stop for DCF")

Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

devtools: add acronyms in dictionary for commit checks

Verbs ->
DevX  ->

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/hinic/base: modify returned error values

Modify return errors with Linux system errors when
system requests fail.

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: add TCAM filter switch for flow director

When the filter rule needs to use the TCAM method, driver
enables the TCAM filter switch, otherwise disables it, which
can improve the performance of microcode in FDIR scenarios that
does not use TCAM method.

Fixes: 1fe89aa37f36 ("net/hinic: add flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: fix setting promiscuous mode

When setting promiscuous or allmulticast mode, increase
multi-thread resource protection, because the patch
"net/bonding: prefer allmulti to promiscuous for LACP"
adds trying to use allmulti when adding a slave, and
EVS bond driver also sets promisc with another thread,
which may lead to thread reentry and cause failure to
set promiscuous mode.

Fixes: cb7b6606ebff ("net/hinic: add RSS stats and promiscuous ops")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic/base: remove unused function parameters

Remove unused parameters for mgmt channel with no ack.

Fixes: a4957d87e05a ("net/hinic/base: add mgmt module")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic/base: check output of management sync channel

Add output buffer and out size info for some cmds that use management
sync channel, which can improve dfx capability when sent msg failed.

Fixes: 7fcd6b05b923 ("net/hinic/base: support cmdq mechanism")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/octeontx2: add devargs to lock Rx/Tx contexts

Add device arguments to lock Rx/Tx contexts.
Application can either choose to lock Rx or Tx contexts by using
'lock_rx_ctx' or 'lock_tx_ctx' respectively per each port.

Example:
-w 0002:02:00.0,lock_rx_ctx=1 -w 0002:03:00.0,lock_tx_ctx=1

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/hns3: add missing features to feature list

This patch adds 'Scattered Rx' and 'Multiprocess aware' those are
supported by current hns3 PMD driver for feature list file named
hns3.ini and hns3_vf.ini.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix reassembling multiple segment packets in Tx

Because of the hardware constraints, hns3 network engine doesn't support
sending packets with more than eight fragments. And hns3 pmd driver
tries to reassemble these kind of packets to meet hardware requirements.
Currently, there are two problems:
1) when the input buffer_len * 8 < pkt_len, the packets are impossible
   to be reassembled into 8 Buffer Descriptors. In this case, the
   packets will be passed to hardware, which eventually causes a
   hardware reset.
2) The meta data in origin packets which are required to fill into the
   descriptor haven't been copied into the reassembled pkts.

This patch adds a check for 1) to ensure such packets will be dropped by
driver and copies useful meta data from the origin packets to the
reassembled packets.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>

net/hns3: fix Rx buffer size

Currently, rx_buf_size of hns3 PMD driver is fixed on, and it's value
depends on the firmware which will decrease the flexibility of PMD.

The receive side mbufs was allocated from the mempool given by upper
application calling rte_eth_rx_queue_setup API function. So the memory
chunk used for net device DMA is depend on the data room size of the
objects in this mempool. Hns3 PMD driver should set the rx_buf_len
smaller than the data room size of mempool and our hardware only support
the following four specifications: 512, 1024, 2148 and 4096.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: report Tx descriptor segment limitations

According to the user manual of Kunpeng920 SoC, the max allowed number
of segments per whole packet is 63 and the max number of segments per
packet is 8 in datapath.

This patch reports the Two segment parameters of Tx descriptor
limitations to DPDK framework.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: clear residual hardware configurations on init

When the last driver exits abnormally, for example, it is killed by
'kill -9', it may be too late to clear the configuration and cause the
configuration to remain. Therefore, to ensure that the hardware
environment is clean during initialization, the PF driver actively clear
the hardware environment during initialization, including PF and
corresponding VFs' vlan, mac, flow table configurations, etc.

Fixes: d51867db65c1 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>

net/hns3: get device capability in primary process

This patch optimizes the code to get device capability in primary
process, and moves the code of getting PCI revision id in order to avoid
evaluating the private hw->revision of shared PMD-specific private data
in slave process.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>

net/hns3: support setting VF PVID by PF driver

This patch adds support setting VF PVID by hns3 PF kernel ethdev driver
on the host by "ip link set <eth num> vf <vf id> vlan <vlan tag>"
command.

Because of the hardware constraints, the striped VLAN tag will always in
Rx descriptors which should has been dropped when PVID is enabled and
the PVID will overwrite the outer VLAN tag in Tx descriptor. So, hns3
PMD driver need to change the processing of VLAN tags in the process of
Tx and Rx according to whether PVID is enabled.
1) If the hns3 PF kernel ethdev driver sets the PVID for VF device
   before the initialization of the related VF device, hns3 VF PMD
   driver should get the PVID state from PF driver through mailbox and
   update the related state in txq and rxq maintained by hns3 VF driver
   to change the process of Tx and Rx.
2) If the hns3 PF kernel ethdev driver sets the PVID for VF device after
   initialization of the related VF device, the PF driver will notify VF
   driver to update the PVID state. The VF driver will update the PVID
   configuration state immediately to ensure that the VLAN process in Tx
   and Rx is correct. But in the window period of this state transition,
   packets loss or packets with wrong VLAN may occur.
3) Due to hardware limitations, we only support two-layer VLAN hardware
   offload in Tx direction based on hns3 network engine, so when PVID is
   enabled, QinQ insert is no longer supported. And when PVID is
   enabled, in the following two cases:
     i) packets with more than two VLAN tags.
     ii) packets with one VLAN tag while the hardware VLAN insert is
         enabled.
   The packets will be regarded as abnormal packets and discarded by
   hardware in Tx direction. For debugging purposes, a validation check
   for these types of packets is added to the '.tx_pkt_prepare' ops
   implementation function named hns3_prep_pkts to inform users that
   these packets will be discarded.

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>

net/hns3: decrease non-nearby memory access in Rx

Currently, hns3 PMD driver needs know the PVID configuration state and
do different processing in the 'rx_pkt_burst' ops implementation
function.

This patch adds a member to struct hns3_rx_queue/hns3_tx_queue of the
driver to indicate the PVID configuration status, so it isn't need
to access other data structure in the 'rx_pkt_burst' ops implementation,
to avoid performance loss because of reducing cache miss.

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: support LRO

This patch adds support of LRO offload for hns3 PMD driver.

Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: support symmetric RSS

This patch adds support of symmetric algorithm of RSS.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>

net/ice/base: update version

Update base code version in readme.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clear and free XLT entries on reset

This fix has been added to address memory leak issues resulting from
triggering a sudden driver reset which does not allow us to follow our
normal removal flows for SW XLT entries for advanced features.

- Adding call to destroy flow profile locks when clearing SW XLT tables.
- Extraction sequence entries were not correctly cleared previously
which could cause ownership conflicts for repeated reset-replay calls.

Fixes: 969890d505b1 ("net/ice/base: enable clearing of HW tables")
Cc: stable@dpdk.org
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: split capability parse into separate functions

The ice_parse_caps function is used to convert the capability block data
coming from firmware into a structured format used by other parts of the
code.

The current implementation directly updates the hw->func_caps and
hw->dev_caps structures. It is directly called from within
ice_aq_discover_caps. This causes the discover_caps function to have the
side effect of modifying the hw capability structures, which is not
intuitive.

Split this function into ice_parse_dev_caps and ice_parse_func_caps.
These functions will take a pointer to the dev_caps and func_caps
respectively. Also create an ice_parse_common_caps for sharing the
capability logic that is common to device and function.

Doing so enables a future refactor to allow reading and parsing
capabilities into a local caps structure instead of modifying the
members of the hw structure directly.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add capability list AQ function

The current implementation for reading device and function capabilities
from firmware, ice_aq_discover_caps, has potentially undesirable
side effects.

ice_aq_discover_caps calls ice_parse_caps, resulting in overwriting the
capabilities stored in the hw structure. This is ok during
initialization, but means that code which wants to read the capabilities
after initialization cannot use ice_aq_discover_caps without being
careful of the side effects.

Factor out the AQ command logic into a new ice_aq_list_caps function.
This will be used by the ice_aq_discover_caps function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clean code in flow director module

Remove unused macro and function.
Declare no external referenced function as static.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move LLDP function to common module

To implement a FW workaround for LFC, a set_local_mib must be
performed after every link up event.  For systems that do not
have DCB configured, we need to move the function
ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to
ice_common.c so that the driver always has access to this AQ
command.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup some code style

Cleanup code style issue reported by kernel checkpatch.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix GTP-U inner RSS IPv4 IPv6 co-exist

An IP header combined with GTP-U header should be regarded as
inner layer for RSS, otherwise it mess the field vector between
an IPv4 rule and IPv6 rule e.g:

testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
gtpu_psc  / ipv4 / udp / end actions rss types ipv4-udp end key_len \
0 queues end / end
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
gtpu_psc  / ipv6 / udp / end actions rss types ipv6-udp end key_len \
0 queues end / end

Fixes: b7d34ccc47b5 ("net/ice/base: packet encapsulation for RSS")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice: redirect switch rule with to VSI list action

Support redirect a switch rule if its action is to VSI list.

Fixes: 397b4b3c5095 ("net/ice: enable flow redirect on switch")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/mlx5: add OS specific flow actions operations

This patch introduces the OS specific functions, for flow actions
create and destroy operations.

In existing implementation, the functions to create flow actions
return a pointer to the created action object.

The new OS specific functions to create flow actions return 0 on
success, and (-1) on failure.
On success, a pointer to the created action object is returned
using an additional parameter.
On failure errno is set.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/mlx5: add OS specific flow create and destroy

This patch introduces the OS specific functions, for flow create
and flow destroy operations.

In existing implementation, the functions to create objects
(flow/table/matcher) return a pointer to the created object.
The functions to destroy objects return 0 on success and errno on
failure.

The new OS specific functions to create objects return 0 on success,
and (-1) on failure.
On success, a pointer to the created object is returned using an
additional parameter.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/mlx5: add OS specific flow type selection

In current implementation the flow type (DV/Verbs) is selected
using dedicated function flow_get_drv_type().

This patch adds OS specific function mlx5_flow_os_get_type(), to
allow OS specific flow type selection.
The new function is called by flow_get_drv_type(), and if it returns a
valid value (DV/Verbs) no more logic is required.
Otherwise the existing logic is executed.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/mlx5: add OS specific flow related utilities

This patch introduces the first OS specific utility functions,
for use by flow engine in different OS implementation.

The first utility functions are:
bool mlx5_flow_os_item_supported(item)
bool mlx5_flow_os_action_supported(action)

They are implemented to check OS specific support for different
item types and action types.

New header file is added:
drivers/net/mlx5/linux/mlx5_flow_os.h

This file contains the utility functions mentioned above for Linux OS.
At this stage they are implemented as static inline, for efficiency,
and always return true.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/mlx5: rename Verbs action to generic name

As part of the effort to support DPDK on Windows and other OS,
rename 'verbs_action' to the generic name 'action'.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/mlx5: rename Verbs flow to generic name

As part of the effort to support DPDK on Windows and other OS,
rename from IB related name to generic name.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

common/octeontx2: fix crash on running procinfo

Segmentation fault has been observed while running procinfo
with reset options i.e. --stats-reset and --xstats-reset.
Reason is procinfo runs as a secondary process and tries to
hold a lock which is part of struct mdev, which was not
allocated as part of shared memory.

Fixes: 5ca59711f771 ("common/octeontx2: add mailbox base support infra")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/iavf: fix RSS RETA after restart

This patch moved the RSS initialization from dev start to
dev configure, to fix the issue that RSS redirection table
can not be kept after restarting port.

Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ixgbe/base: remove dead code

The question around getting rid of the assignments seems lived
long enough, if they are not needed until now, we can drop them.

Fixes: 39bca0ed994c ("ixgbe: DCB in base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix uninitialized variable

This is observed with experimental gcc 11, although the older gcc
versions don't complain about it, issue seems a valid one.
gcc version 11.0.0 20200621 (experimental) (GCC)

Build error
.../drivers/net/iavf/iavf_ethdev.c: In function ‘iavf_dev_link_update’:
.../drivers/net/iavf/iavf_ethdev.c:641:6:
    error: ‘new_link’ is used uninitialized [-Werror=uninitialized]
  641 |  if (rte_atomic64_cmpset((uint64_t *)&dev->data->dev_link,
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  642 |     *(uint64_t *)&dev->data->dev_link,
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  643 |     *(uint64_t *)&new_link) == 0)
      |     ~~~~~~~~~~~~~~~~~~~~~~~
.../drivers/net/iavf/iavf_ethdev.c:596:22:
    note: ‘new_link’ declared here
  596 |  struct rte_eth_link new_link;
      |                      ^~~~~~~~
cc1: all warnings being treated as error

All fields of the 'new_link' struct is already set in function, so the
'uninitialized' warning is hard to get. This is because the combination
of aligning and bitfield usage of the struct

The definition of the struct is:
struct rte_eth_link {
        uint32_t link_speed;        /**< ETH_SPEED_NUM_ */
        uint16_t link_duplex  : 1;  /**< ETH_LINK_[HALF/FULL]_DUPLEX */
        uint16_t link_autoneg : 1;  /**< ETH_LINK_[AUTONEG/FIXED] */
        uint16_t link_status  : 1;  /**< ETH_LINK_[DOWN/UP] */
} __rte_aligned(8);      /**< aligned for atomic64 read/write */

Overall the size of the 'struct rte_eth_link' is 64 bits, but function
only sets the 35 bits of it, because only 3 bits of 16 bits variable are
used.
When the struct cast to 'uint64_t' because of the 'rte_atomic64_cmpset'
the upper 29 bits are used without initialization.

To fix the uninitialized usage, memset the variable 'new_link' before
using it.

Fixes: 48de41ca11f0 ("net/avf: enable link status update")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix EEPROM data

Kernel driver reads EEPROM data from flash but DPDK reads from
shadow ram. This patch fixes the issue by changing method to get
EEPROM data from flash.

Fixes: 68a1ab82ad74 ("net/ice: speed up to retrieve EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ixgbe: report 10Mbps link speed for x553

For ixgbe x553(IXGBE_DEV_ID_X550EM_A_1G_T) it support 10M
link speed, so add the support link speed info for 10Mb/s.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/ice: support original VF action for DCF

Add support to allow the original VF actions in DCF.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

service: fix core mapping reset

The rte_service_lcore_reset_all function stops execution of services
on all lcores and switches them back from ROLE_SERVICE to ROLE_RTE.
However the thread loop for slave lcores (eal_thread_loop) distincts these
roles to set lcore state after processing delegated function.
It sets WAIT state for ROLE_SERVICE, but FINISHED for ROLE_RTE.
So changing the role to RTE before stopping work in slave lcores
causes lcores to end in FINISHED state. That is why the rte_eal_lcore_wait
must be run after rte_service_lcore_reset_all to bring back lcores to
launchable (WAIT) state.
This has been fixed in test app and clarified in API documentation.

Setting the state to WAIT in rte_service_runner_func is premature
as the rte_service_runner_func function is still a part of the lcore
function delegated to slave lcore. The state is overwritten anyway in
slave lcore thread loop. This premature setting state to WAIT might
however cause rte_eal_lcore_wait, that was called by the application,
to return before slave lcore thread set the FINISHED state. That's
why it is removed from librte_eal rte_service_runner_func function.

Bugzilla ID: 464
Fixes: 21698354c832 ("service: introduce service cores concept")
Fixes: f038a81e1c56 ("service: add unit tests")
Cc: stable@dpdk.org
Reported-by: Sarosh Arif <sarosh.arif@emumba.com>
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

eventdev: relax SMP barriers with C11 atomics

The impl_opaque field is shared between the timer arm and cancel
operations. Meanwhile, the state flag acts as a guard variable to
make sure the update of impl_opaque is synchronized. The original
code uses rte_smp barriers to achieve that. This patch uses C11
atomics with an explicit one-way memory barrier instead of full
barriers rte_smp_w/rmb() to avoid the unnecessary barrier on aarch64.

Since compilers can generate the same instructions for volatile and
non-volatile variable in C11 __atomics built-ins, so remain the volatile
keyword in front of state enum to avoid the ABI break issue.

Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>

eventdev: remove redundant reset on timer cancel

There is no thread will access these impl_opaque data after timer
canceled. When new timer armed, it got refilled. So the cleanup
process is unnecessary.

Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>

eventdev: use C11 atomics for lcore timer armed flag

The in_use flag is a per core variable which is not shared between
lcores in the normal case and the access of this variable should be
ordered on the same core. However, if non-EAL thread pick the highest
lcore to insert timers into, there is the possibility of conflicts
on this flag between threads. Then the atomic compare-and-swap
operation is needed.

Use the C11 atomics instead of the generic rte_atomic operations to
avoid the unnecessary barrier on aarch64.

Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>

eventdev: fix race condition on timer list counter

The n_poll_lcores counter and poll_lcore array are shared between lcores
and the update of these variables are out of the protection of spinlock
on each lcore timer list. The read-modify-write operations of the counter
are not atomic, so it has the potential of race condition between lcores.

Use c11 atomics with RELAXED ordering to prevent confliction.

Fixes: cc7b73ea9e3b ("eventdev: add new software timer adapter")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>

test/crypto: add ChaCha20-Poly1305 cases

This patch adds Chacha20-Poly1305 implementation to
cryptodev tests.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Tejasree Kondoj <ktejasree@marvell.com>

crypto/qat: support ChaCha20-Poly1305

This patchset adds ChaCha20-Poly1305 implementation to Intel
QuickAssist Technology pmd.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>