net/ena/base: rework interrupt moderation

This feature allows for adaptive interrupt moderation. It's not used by
the DPDK PMD, but is a part of the newest HAL version.

Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

net/ena/base: remove conversion of indirection table

After the indirection table is being saved in the device, there is no
need to convert it back, as it's already saved in host_rss_ind_tbl
array.

As a result, the call to the ena_com_ind_tbl_convert_from_device() is
not needed.

Signed-off-by: Michal Krawczyk <mk@semihalf.com>

net/ena/base: fix testing for supported hash function

There was a bug in ena_com_fill_hash_function(), which was causing bit to
be shifted left one bit too much.

To fix that, the ENA_FFS macro is being used (returning the location of
the first bit set), hash_function value is being subtracted by 1 if any
hash function is supported by the device and BIT macro is used for
shifting for better verbosity.

Fixes: 99ecfbf845b3 ("ena: import communication layer")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>

net/ena/base: generate default random RSS hash key

Although the RSS key still cannot be set, it is now being generated
every time the driver is being initialized.

Multiple devices can still have the same key if they're used by the same
driver.

Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

net/ena/base: prevent allocation of zero sized memory

rte_memzone_reserve() will reserve the biggest contiguous memzone
available if received 0 as size param.

Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

net/ena/base: make allocation macros thread-safe

Memory allocation region id could possibly be non-unique
due to non-atomic increment, causing allocation failure.

Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

net/ena: ensure Rx buffer size is at least 1400B

Some of the ENA devices can't handle buffers which are smaller than a
1400B. Because of this limitation, size of the buffer is being checked
and limited during the Rx queue setup.

If it's below the allowed value, PMD won't finish it's configuration
successfully..

Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>

doc: update ice guide driver/firmware/package version

Update driver/firmware/package version for DPDK20.02

Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice/base: remove unused code in switch rule

Update a switch rule' action from "to VSI" to "to VSI List"
should only happen when the same rule has been programmed with
a different fwd destination. This is already handled by below
code block:

m_entry = ice_find_adv_rule_entry(...)
if (m_entry) {
...
ice_adv_add_update_vsi_list(...)
}

The following ice_update_pkt_fwd_rule is unnecessary and should be
removed due to:
1) If a switch rule's action is still to VSI, which means, it is
   the first time be issued,  we don't need to update it "to VSI
   List."
2) Actually the implementation does not match the comment, it still
   update the rule with "to VSI" action.

Fixes: fed0c5ca5f19 ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/iavf: enable port reset

This patch is intended to add iavf_dev_reset ops, enable iavf to support
"port reset all".

Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Tested-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/i40e: enable MAC address as flow director input set

Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.

Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/ice: fix RSS advanced rule

This patch moved the RSS initialization from dev start to dev configure
to fix RSS advanced rule invalid issue after running port stop and port
start.

Fixes: 5ad3db8d4bdd ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Tested-by: Zhiwei He <zhiwei.he@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/nfp: fix dangling pointer on probe failure

When nfp_pf_create_dev() is cleaning up, it does not correctly set
the dev_private variable to NULL, which will lead to a double free.

Fixes: ef28aa96e53b ("net/nfp: support multiprocess")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>

net/nfp: fix log format specifiers

Changing format specifier for the 'size_t' as '%z' and for 'off_t' as
'%jd'.

Also this fix enables compiling PMD for 32bit architecture.

Fixes: 29a62d1476b6 ("net/nfp: add CPP bridge as service")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>

examples/vmdq: fix RSS configuration

In order that all queues of pools can receive packets,
add enable-rss argument to change RSS configuration.

Fixes: 6bb97df521aa ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>

doc: add user guide for VMDq example

Currently, there is no documentation for VMDq example,
this path added the user guide for VMDq.

Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>

ethdev: fix build when vtune profiling is on

Add the previous prototype for the 'profile_hook_rx_burst_cb' function
to fix the compiler warning when the DPDK is built with
'RTE_ETHDEV_PROFILE_WITH_VTUNE' config option enabled:
/home/dpdk/lib/librte_ethdev/ethdev_profile.c:17:1: warning:
no previous prototype for profile_hook_rx_burst_cb [-Wmissing-prototypes]

Fixes: 2c1bbab7f09d ("ethdev: change vtune profiling approach")
Cc: stable@dpdk.org
Signed-off-by: Eugeny Parshutin <eugeny.parshutin@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/memif: fix resource leak

Fixes: c41a04958b09 ("net/memif: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Vadim Podovinnikov <podovinnikov@protei.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: support dumping socket memory

Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.

Usage:
    dump_socket_mem

Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/netvsc: avoid possible live lock

Since the ring buffer with host is shared for both transmit
completions and receive packets, it is possible that transmitter
could get starved if receive ring gets full.

Better to process all outstanding events which frees up transmit
buffer slots, even if means dropping some packets.

Fixes: 7e6c82430702 ("net/netvsc: avoid over filling Rx descriptor ring")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

bus/vmbus: simplify arguments to need signal function

The transmit need signal function can avoid an unnecessary
dereference by passing the right pointer. This also makes
code better match FreeBSD driver.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: handle Tx completions based on burst size

If tx_free_thresh is quite low, it is possible that we need to
cleanup based on burst size.

Fixes: fc30efe3a22e ("net/netvsc: change Rx descriptor setup and sizing")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: remove process event optimization

Remove unlocked check for data in receive ring.
This check is not safe because of missing barriers etc.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: fix memory free on device close

The netvsc PMD was putting the mac address in private data but the
core rte_ethdev doesn't allow that it. It has to be in rte_malloc'd
memory or a message will be printed on shutdown/close.
 EAL: Invalid memory

Fixes: f8279f47dd89 ("net/netvsc: fix crash in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: split send buffers from Tx descriptors

The VMBus has reserved transmit area (per device) and transmit
descriptors (per queue). The previous code was always having a 1:1
mapping between send buffers and descriptors.
This can lead to one queue starving another and also buffer bloat.

Change to working more like FreeBSD where there is a pool of transmit
descriptors per queue. If send buffer is not available then no
aggregation happens but the queue can still drain.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: handle Rx packets during multi-channel setup

It is possible for a packet to arrive during the configuration
process when setting up multiple queue mode. This would cause
configure to fail; fix by just ignoring receive packets while
waiting for control commands.

Use the receive ring lock to avoid possible races between
oddly behaved applications doing rx_burst and control operations
concurrently.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: propagate descriptor limits from VF

If application cares about descriptor limits, the netvsc device
values should reflect those of the VF as well.

Fixes: dc7680e8597c ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

app/testpmd: enhance GTP support

This patch adds CLI option to enter the v_pt_rsv_flags value for GTP
flow pattern item.
It also adds GTP as valid item in raw_encap and raw_decap setting.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>

net/ice: redirect switch rule to new VSI

After VF reset, VF's VSI number may be changed,
the switch rule which forwards packet to the old
VSI number should be redirected to the new VSI
number.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: enable flow redirect on switch

Enable flow redirect on switch, currently only
support VSI redirect.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix input set of VLAN item

The input set for inner type of vlan item should
be ICE_INSET_ETHERTYPE, not ICE_INSET_VLAN_OUTER.
This mac vlan filter is also part of DCF switch filter.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: add more flow support for permission stage

This patch add switch filter permission stage support
for more flow pattern in pf only pipeline mode.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support IPv6 NAT-T

This patch add switch filter support for IPv6 NAT-T packets,
it enable switch filter to direct IPv6 packets with
NAT-T payload to specific action.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support PFCP

This patch add switch filter support for PFCP packets,
it enable switch filter to direct IPv4/IPv6 packets with
PFCP session or node payload to specific action.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support ESP/AH/L2TP

This patch add support for ESP/AH/L2TP packets,
it enable switch filter to direct IPv6 packets with
ESP/AH/L2TP payload to specific action.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: add action number check for switch

The action number can only be one for DCF or PF
switch filter, not support multiple actions.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: change default tunnel type

The default tunnel type for switch filter change to new
definition of ICE_SW_TUN_AND_NON_TUN in order that the rule
will be apply to more packet type.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support MAC VLAN rule

This patch add support for MAC VLAN rule,
it enable switch filter to direct packet base on
mac address and VLAN id.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: change switch parser to support flexible mask

DCF need to make configuration of flexible mask, that is to say
some input set mask may be not 0xFFFF type all one bit. In order
to direct L2/IP multicast packets, the mask for source IP maybe
0xF0000000, this patch enable switch filter parser for it.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support more PPPoE input set

This patch add more support for PPPoE packet,
it enable switch filter to direct PPPoE packet base on
session id and PPP protocol type.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: enable switch flow on DCF

DCF on CVL is a control plane VF which take the responsibility to
configure all the PF/global resources, this patch add support DCF
on to program forward rule to direct packets to VFs.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/octeontx2: support custom L2 header

This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.

Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: fix device configuration sequence

When an application invokes rte_eth_dev_configure consecutively without
setting up Rx/Tx queues, it will incorrectly return error while trying
to restore Rx/Tx queue configuration.

Fix configuration sequence by checking if any Rx/Tx queues are
previously configured before trying to restore them.

Fixes: 548b5839a32b ("net/octeontx2: add device configure operation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: add TM capability

Add Traffic Management capability callbacks to provide
global, level and node capabilities. This patch also
adds documentation on Traffic Management Support.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: add Tx queue rate limit

Add Tx queue ratelimiting support. This support is mutually
exclusive with TM support i.e when TM is configured, tx queue
ratelimiting config is no more valid.

Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: support TM debug

Add debug support to TM to dump configured topology
and registers. Also enable debug dump when sq flush fails.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: add TM dynamic topology update

Add dynamic parent and shaper update callbacks that
can be used to change RR Quantum or PIR/CIR rate dynamically
post hierarchy commit. Dynamic parent update callback only
supports updating RR quantum of a given child with respect to
its parent. There is no support yet to change priority or parent
itself.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: add TM stats and shaper profile

Add TM support for stats read and private shaper
profile addition or deletion.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: add TM hierarchy commit

Add TM hierarchy commit callback to support enabling
newly created topology.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: add TM node suspend/resume

Add TM support to suspend and resume nodes post hierarchy
commit.

Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: support TM node add/delete

Adds support to Traffic Management callbacks "node_add"
and "node_delete". These callbacks doesn't support
dynamic node addition or deletion post hierarchy commit.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: support dynamic topology update

Modify resource allocation and freeing logic to support
dynamic topology commit while to traffic is flowing.
This patch also modifies SQ flush to timeout based on minimum shaper
rate configured. SQ flush is further split to pre/post
functions to adhere to HW spec of 96XX C0.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: restructure TM helper functions

Restructure traffic manager helper function by splitting to
multiple sets of register configurations like shaping, scheduling
and topology config.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>

net/octeontx2: setup link config based on BP level

Configure NIX_AF_TL3_TL2X_LINKX_CFG using schq at
level based on NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL].

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

net/octeontx2: support configuring link attributes

Adding support to configure link attributes like speed,
duplex, negotiation.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: enable error and RAS interrupt in configure

Patch adds routines to set/clear nix lf error & ras interrupt enable
registers. These nix lf error interrupts get triggered if there are
any failures during nix lf configuration. This interrupts are enabled
before any hardware configurations initiated on the allocated nix lf.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx: support Rx/Tx checksum offload

This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support flow control

Patch adds ethdev flow control set/get callback ops,
pmd enables modifying flow control attributes like
rx_pause, tx_pause, high & low water mark.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support set link up/down

Adding support for setting link up/down eth operation.
It is used to enable disable lmac.  Also implemented a
poll function for getting the link status at regular
intervals.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support VLAN filter offload

Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.

Patch also defines rx_offload_flag for vlan filtering.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support MTU

Adding support for mtu eth operation which configures mtu based
on max pkt len.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support fast mbuf free

This patch adds capability to fast release of mbuf
following successful transmission.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: add framework for Rx/Tx offloads

Adding macro based framework to hook rx/tx burst function
pointers to the appropriate function based on rx/tx offloads.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support multi segment

Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx2: offload bad L2/L3/L4 UDP lengths detection

Octeontx2 HW has support for detecting the bad L2/L3/L4 UDP lengths.
Since DPDK does not have specific error flag for this, exposing it
as bad checksum failure in mbuff:ol_flags to leverage this feature.

These errors will be propagated to the ol_flags as follows.

L2 length error ==> (PKT_RX_IP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD).
Both Outer and Inner L3 length error ==> PKT_RX_IP_CKSUM_BAD.
Outer L4 UDP length/port error ==> PKT_RX_OUTER_L4_CKSUM_BAD.
Inner L4 UDP length/port error ==> PKT_RX_L4_CKSUM_BAD.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx: fix meson build for disabled drivers

Add a condition to check if octeontx drivers are disabled.
octeontx drivers are built only if dependent drivers i.e.
ethdev, mempool and common/octeontx are enabled.

Bugzilla ID: 387
Fixes: 7f615033d64f ("drivers/net: build Cavium NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

common/octeontx2: upgrade mbox definition to version 5

Sync mail box data structures to version 0x0005 to
that of kernel AF driver.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/tap: remove unused assert

The assert checks is not necessary, the gso_ctx is always non-NULL.

Fixes: 050316a88313 ("net/tap: support TSO (TCP Segment Offload)")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add Xilinx copyright

Xilinx acquired Solarflare in 2019.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: James Fox <jamesfox@xilinx.com>

net/sfc: check actual all multicast unknown unicast filters

Check that unknown unicast and unknown multicast filters are
applied and return an error if they are not applied. The error
is used in promiscuous and all multicast mode enable and disable
callbacks.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: add API to get currently operating filters

Unknown unicast filter creation may fail because of insufficient
permissions on VF. This failure is handled internally in libefx MAC
reconfiguration without any way for a user to know if it happened.
Making the MAC reconfiguration forward error code of filter
reconfiguration would be too destructive to the existing code
that may rely on the function never returning that error.

Add an API for getting the status of current unknown unicast and
all multicast filters since user must know that requested
filters are actually applied.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: refactor multicast filters reconfiguration

Refactor the multicast filter reconfiguration stage of the reconfigure
function to make it clearer and allow for more convenient further
changes.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: refactor unicast filters reconfiguration

Refactor the unicast filter reconfiguration stage of the reconfigure
function to make it clearer and allow for more convenient further
changes.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: refactor filters mark in reconfigure

Refactor the filters mark stage of the reconfigure function
to make it clearer and allow for more convenient further changes.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: refactor filters cleanup in reconfigure

Refactor the filters cleanup stage of the reconfigure function
to make it clearer and allow for more convenient further changes.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/nfb: check array size before access

The driver wrongly assumed the presence of at least one rxmac in every
firmware and accessed to non-existing unit

Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Acked-by: Jakub Neruda <neruda@netcope.com>

net/vmxnet3: support MTU set

(Picked up from @Charles Myers patch
https://patchwork.dpdk.org/patch/57771/)

When the mtu_set() function is not implemented, rte_eth_dev_set_mtu()
fails with -ENOTSUP and mtu is not stored in the mtu field in the
rte_eth_dev_data.  This causes the mtu in Vmxnet3_MiscConf which is
shared with hypervisor to always be set to 1500.

This may cause issues receiving jumbo frames on Enhanced Data Path
N-VDS.

Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>

net/i40e: enable VF to program MAC address

Due to the restriction of the flag I40E_FLAG_VF_MAC_BY_PF,
VF cannot program the MAC address.
In order to solve this inflexibility, the use of I40E_FLAG_VF_MAC_BY_PF
has been deleted in the code implementation to ensure that
VF can flexibly program the MAC address.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice/base: check memory pointer before copying

The ice_memdup doesn't check the new allocated memory pointer, it calls
the rte_memcpy directly. It should check it.

Fixes: 5f0978e96220 ("net/ice/base: add OS specific implementation")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>

doc: update ixgbe features list

Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

doc: update iavf features list

Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

doc: update ice features list

Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

doc: update i40e features list

Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice/base: enable RSS for PFCP/L2TP/ESP/AH

Add support for PFCP, L2TP, ESP and AH RSS enabling.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix binary order for GTPU filter

Take network order for gtpu fdir filter.

Fixes: b5c274f4e2ad ("net/ice/base: support FDIR for GTPU QFI field")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: change function to static

Change ice_set_fd_desc_val to static, since it only be used
internally.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support PFCP and NAT-T of switch

This patch add support switch rule for PFCP and NAT-T
packet base on profile rule, PFCP and NAT-T packet will not
be matched on any packet fields, but instead matches
the profile that the packet hits in the switch block.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move some macros

Move some macro from ice_switch.c to ice_switch.h. Currently this
is only required by kernel driver, DPDK just to sync the code.

Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: group case statements

ICE_BLK_FD and ICE_BLK_RSS are executing the same code so group the case
statements together instead of duplicating code for each block.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: handle critical FW error

A race condition between FW and SW can occur between admin queue setup
and the first command sent. A link event may occur and FW attempts to
notify a non-existent queue. FW will set the critical error bit and
disable the queue. When this happens retry queue setup.

Signed-off-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: improve GTPU extend header handle

A GTPU header can stack with a extend header or not, while
current implementation does not allow HDR bit sets like below:

ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_EH
ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_UP
ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_DWN

Which is not convenient for upper layer flow parser to
generate correct HDR bit.

but it could be if we have below assumptions:

ICE_FLOW_SEG_HDR_GTPU_DWN -- for GTPU with extend header down link
ICE_FLOW_SEG_HDR_GTPU_UP  -- for GTPU with extend header up link
ICE_FLOW_SEG_HDR_GTPU_EH  -- for GTPU with any extend header
ICE_FLOW_SEG_HDR_GTPU_IP  -- for any GTPU header, but when it combined
                             with any above it downgrade to a dummy one.

And handle from specific case to generic case will hit all the cases
as expected.

if else (hdr & ICE_FLOW_SEG_HDR_GTPU_DWN) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_UP) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_EH) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_IP {
...
}

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: allow profile based switch rules

Switch rules usually match packet fields to take actions. Add capability
to add a switch rule that does not match any packet fields, but instead
matches the profile that the packet hits in the switch block.

Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add default DCB parameters

Added new value for cmd_flag:
Persistently set the DCB configuration mode for the current port.
Added new value for valid_flags: represent bit#1 of command flag

Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: allow adding MAC VLAN filter on port

Add new API function to allow user to choose port
on which mac vlan rule going to be added.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: refactor flow control function

We will remove the logic of configuring the flow control out of the
ice_set_fc(...) function. The goal is to enable any driver to combine
all PHY related flow logic, without repeatedly call ice_aq_set_phy_cfg.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add ethertype check for dummy packet

In order to support switch rule for ethertype filter
with ipv6 ethertype id, it has to check ethertype
then find a proper dummy packet.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: ignore EMODE when setting PHY config

When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds
with an EMODE error, software will ignore the error as it simply
means that manageability (ex: BMC) is in control of the link and that
the new setting may not be applied.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: reduce scope of variables

The scope of these variables can be reduced, so do so. This also
eliminates the need for the extra wrapping/braces.

Also, compact a line since it can fit within 80 columns

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add more macros for FDID priority

Add macro for FDID  priority 0 and 3, also adjust the
fdid_prio position to sync with kernel driver.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/mlx5: fix imissed counter overflow

The Hw counters is defined as 32bit unsigned value and read from
the sysfs. Firstly read the base value while application start,
then fetch the new value while do query and minus the base value.
If the new value is less than base value, will result in a
negative value and convert to the big value as unsigned 64bit.

PMD add xstats field to store the last successfully read counter,
use it if failed to read hw counter from sysfs.
PMD also record the last output value to handle the wrap around case,
if overflow happened, increase the wrap count by 1 and save into the
higher 32bit, and update the new value into lower 32bit, finally
return the 64bit counter value.

Fixes: ce9494d76c47 ("net/mlx5: report imissed statistics")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>