Alexander Guy [Thu, 23 Oct 2014 23:39:32 +0000 (16:39 -0700)]
kni: fix build on Ubuntu-hybrids
In the case where a userspace reports itself as Ubuntu, but the
kernel isn't providing the expected version signature interface,
turn off Ubuntu specializations.
This situation happens often enough in development environments,
and with multi-distribution build servers (e.g. chroot, containers).
Signed-off-by: Alexander Guy <alexander@andern.org> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Pablo de Lara [Wed, 22 Oct 2014 11:17:01 +0000 (12:17 +0100)]
ip_frag: disable ip fragmentation if mbuf refcnt is disabled
rte_ipv4_fragment_packet() and rte_ipv6_fragment packet()
call rte_pktmbuf_attach() to attach the segment of the original
packet to the segment of the new fragmented one. Such function
is not declared if RTE_MBUF_REFCNT is disabled, as it needs to
call rte_mbuf_refcnt_update, not declared either.
Therefore, the ipv4/v6 fragmentation libraries are disabled
in that situation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Bruce Richardson [Wed, 22 Oct 2014 10:55:45 +0000 (11:55 +0100)]
ixgbe: always perform vector Rx setup if vpmd enabled
If the vector pmd option is turned on in the compile time config file,
then always call the vector rxq setup, since we can now use the vector
PMD for receiving jumbo frames that need chained mbufs, a.k.a scattered
packets. Up till now, this function was not being called when receiving
scattered packets, potentially leading to problems with mbufs not being
properly initialized.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
Bruce Richardson [Wed, 22 Oct 2014 10:55:44 +0000 (11:55 +0100)]
ixgbe: remove static qualifier for thread safety
Remove the "static" prefix to the template mbuf variable in
ixgbe_rxq_vec_setup function. This will then allow different
threads to initialize different RX queues at the same time,
without one overwriting the other's data.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
Helin Zhang [Wed, 29 Oct 2014 07:09:30 +0000 (15:09 +0800)]
i40e/base: remove early hardware definitions
As i40e_register_x710_int.h is defined for early hardware
only, it should be deleted.
For the register which is still required, just define it in
code directly as workaround.
Helin Zhang [Wed, 29 Oct 2014 03:42:48 +0000 (11:42 +0800)]
i40e: fix configuration of Rx interrupt
Inside NIC RX interrupt is needed for single RX descriptor
write back. The fix is to correct the wrong configuration
of register 'I40E_QINT_RQCTL'.
Note that interrupt will be inside NIC only, that means it
will never be reported outside NIC hardware.
The 1.7 DPDK_FreeBSD_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This is the second document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Jijiang Liu [Thu, 23 Oct 2014 13:19:00 +0000 (21:19 +0800)]
app/testpmd: VXLAN Tx checksum offload
Add test cases in testpmd to test VxLAN Tx checksum offload, which includes
- IPv4 and IPv6 packet
- outer L3, inner L3 and L4 checksum offload for Tx side.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Yong Liu <yong.liu@intel.com>
Jijiang Liu [Thu, 23 Oct 2014 13:18:57 +0000 (21:18 +0800)]
i40e: VXLAN filter
The filter types supported are listed below for VXLAN:
1. Inner MAC and Inner VLAN ID.
2. Inner MAC address, inner VLAN ID and tenant ID.
3. Inner MAC and tenant ID.
4. Inner MAC address.
5. Outer MAC address, tenant ID and inner MAC address.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Yong Liu <yong.liu@intel.com>
Jijiang Liu [Thu, 23 Oct 2014 13:18:55 +0000 (21:18 +0800)]
app/testpmd: VXLAN packet identification
Add two commands to test VXLAN packet identification.
The test steps are as follows:
1> use commands to add/delete VxLAN UDP port.
2> use rxonly mode to receive VxLAN packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Yong Liu <yong.liu@intel.com>
Jijiang Liu [Thu, 23 Oct 2014 13:18:53 +0000 (21:18 +0800)]
ethdev: UDP tunnels
Add two functions to support UDP tunneling port configuration.
There are "some" destination UDP port numbers that have unique meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port,
and this value SHOULD be used by default as the destination UDP port.
Some early implementations of VXLAN have used other values for the destination
port. To enable interoperability with these implementations, the destination
port SHOULD be configurable."
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Yong Liu <yong.liu@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jijiang Liu [Thu, 23 Oct 2014 13:18:51 +0000 (21:18 +0800)]
mbuf: add fields for tunnels
Replace the "reserved2" field with the "packet_type" field
and add the "inner_l2_l3_len" field in the rte_mbuf structure.
The "packet_type" field is used to indicate ordinary packet format and also
tunneling packet format such as IP in IP, IP in GRE, MAC in GRE and MAC in UDP.
The "inner_l2_len" and the "inner_l3_len" fields are added
in the second cache line, they use 2 bytes for TX offloading of tunnels.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Yong Liu <yong.liu@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 1.7 DPDK_Linux_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
This is the first document from a set of documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Huawei Xie [Mon, 20 Oct 2014 04:38:19 +0000 (12:38 +0800)]
examples/vhost: adapt Tx routing to lib
The packet passed to virtio_tx_route has been allocated
mbuf, so there is no need to allocate mbuf for it.
Use vlan offload to transmit vlan tagged packet.
Huawei Xie [Mon, 20 Oct 2014 04:38:18 +0000 (12:38 +0800)]
examples/vhost: use burst enqueue and dequeue from lib
In switch_worker and virtio_tx_local, rte_vhost_enqueue_burst is called to
push host packets to guest VM.
Before enqueue packets to guest VM, vhost example uses configure-able retry logic
to wait for enough vring entries.
In switch_worker, rte_vhost_dequeue_burst is called to get packets from guest VM,
then virtio device will be bound to a queue in VMDQ for the first transmitted
packet.
Huawei Xie [Mon, 20 Oct 2014 04:38:15 +0000 (12:38 +0800)]
examples/vhost: hpa regions for zero copy
check_hpa_regions, fill_hpa_memory_regions and hpa memory region
data structure are added back from old virtio-net.c.
Add hpa (host physical address) region generation/destroy logic.
gpa<->hpa memory translation regions are generated at new_device,
when a virtio device is ready for packet processing.
Huawei Xie [Mon, 20 Oct 2014 04:38:16 +0000 (12:38 +0800)]
examples/vhost: add vhost dev struct
Define vhost_dev data structure.
Change reference to virtio_dev to vhost_dev.
The vhost example use vdev data structure for switching related logic
and container for virtio_dev.
Huawei Xie [Mon, 20 Oct 2014 04:38:14 +0000 (12:38 +0800)]
examples/vhost: remove functions implemented in lib
Those functions are integrated into the user space vhost library:
virtio_dev_rx, virtio_dev_merge_rx, virtio_dev_tx, virtio_dev_merge_tx,
copy_from_mbuf_to_ring, gpa_to_vva.
Declan Doherty [Wed, 22 Oct 2014 12:59:24 +0000 (13:59 +0100)]
bond: disable broadcast mode if mbuf refcnt is disabled
Link bonding broadcast mode requires refcnt parameter in the mbuf struct to
allow efficient transmission of duplicated mbufs on slave ports.
This patch disables broadcast mode when the complication option RTE_MBUF_REFCNT
is disabled to allow clean building of the bonding library.
A warning message notify user of disabling of broadcast mode.
Signed-off-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Marc Sune [Wed, 22 Oct 2014 10:23:11 +0000 (12:23 +0200)]
kni: fix build
Fix compilation warning 'missing-field-initializers' for some GCC and clang
versions introduced in commit 0c6bc8e due to the use of C89/C90 initializers.
Using C99-style initializers
Signed-off-by: Marc Sune <marc.sune@bisdn.de> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Marc Sune [Tue, 21 Oct 2014 10:46:55 +0000 (12:46 +0200)]
kni: memzone pool for alloc and release
The previous implementation of rte_kni_alloc() was allocating memzones with a
name composed of a fixed string and the interface name. When an application was
allocating and deallocating multiple interfaces with different names, memzones
were quickly exhausted, even though memzones from deallocated interfaces were
never used anymore (unless an interface with the same name was re-allocated).
As a result, the application was unable to allocate more KNI interfaces with
different names.
This patch implements the KNI memzone pool in order to prevent memzone
exhaustion when allocating/deallocating KNI interfaces. It adds a new API call,
rte_kni_init(max_kni_ifaces) that shall be called before any call to
rte_kni_alloc() if KNI is used. The memzones are pre-allocated with interface-
independent names so that they can be reused.
Signed-off-by: Marc Sune <marc.sune@bisdn.de> Acked-by: Helin Zhang <helin.zhang@intel.com>
Helin Zhang [Mon, 20 Oct 2014 02:58:17 +0000 (10:58 +0800)]
i40e: expose RSS functions and relevant macros
To reuse code, 'i40e_config_hena()' and 'i40e_parse_hena()' and
their relevant macros need to be extern, and then can be used for
both PF and VF parts.
Helin Zhang [Mon, 20 Oct 2014 02:58:16 +0000 (10:58 +0800)]
ethdev: better typing of RSS constants
Forced type conversion is not needed to define a macro with
constant. The alternate is to let compiler use the default width,
or specify the width with suffix of 'U', 'UL', 'ULL', etc.
Bruce Richardson [Fri, 17 Oct 2014 13:18:12 +0000 (14:18 +0100)]
app/test: fix crash for fbk hashes with a lot of entries
The four-byte-key (fbk) autotest was allocating the keys to be used for
the test on the stack. When the number of entries in the table was
increased significantly, for example, to test larger hashes by increase the
value of ENTRIES, this array of keys was greater than that
allowed on the stack, and so caused problems, i.e. crashes and core dumps.
The solution is to have the keys dynamically allocated on the heap using
malloc. Now if ENTRIES is increased and we run out of memory we get an
error message instead of a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Alan Carew [Tue, 14 Oct 2014 12:18:36 +0000 (13:18 +0100)]
contigmem: fix buffer overrun on unload
The maximum mount contiguous memory regions for FreeBSD is limited by
RTE_CONTIGMEM_MAX_NUM_BUFS, a pointer to each region is stored in
static void * contigmem_buffers[RTE_CONTIGMEM_MAX_NUM_BUFS]
A user can specify a greater amount via hw.contigmem.num_buffers,
while the allocation logic will prevent this allocation from occuring the logic
in contigmem_unload() will attempt to free hw.contigmem.num_buffers and an
overrun occurs.
This patch limits the freeing to a maximum of RTE_CONTIGMEM_MAX_NUM_BUFS.
Signed-off-by: Alan Carew <alan.carew@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Pablo de Lara [Mon, 20 Oct 2014 17:26:35 +0000 (18:26 +0100)]
ethdev: fix memory corruption with default Rx/Tx configuration
Commit fbde27f1 (get default Rx/Tx configuration from dev info),
introduced a bug, which caused memory corruption in dev_info.
To get RX/TX configuration, both rx/tx queue setup functions were calling
dev_info_get from PMDs, so dev_info structure was not being reseted
before being populated.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Thomas Monjalon [Fri, 17 Oct 2014 15:00:53 +0000 (17:00 +0200)]
mk: fix doc cleaning
With make 3.x, guides-% is matched instead of guides-%-clean.
Move the less specific target pattern (guides-%) at the end
to allow matching guides-%-clean first.
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ouyang Changchun [Mon, 13 Oct 2014 03:46:12 +0000 (11:46 +0800)]
virtio: increase max Rx packet length
Since commit 13ce5e7eb94 ("virtio: mergeable buffers"),
this driver has the capability of receiving and transmitting jumbo frame.
So update max Rx packet length.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Tested-by: Jingguo Fu <jingguox.fu@intel.com>
At least on kernels 3.15 or newer, wrong compiler flags are set when building
kernel modules.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Linux kernel build system requires V=1 to enable verbose output, but
current DPDK framework just check if V is defined.
Fix: force V=1 when building Linux kernel modules if verbose output is
enabled.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ouyang Changchun [Wed, 15 Oct 2014 03:11:00 +0000 (11:11 +0800)]
virtio: fix needed vring entry number
Fix one issue in virtio TX: it needs one more vring descriptor to hold the virtio
header when transmitting packets, it is used later to determine whether to free
more entries from used vring.
It fixes failing to transmit any packet with 1 segment in the circumstance of only
1 descriptor in the vring free list.
Huawei Xie [Wed, 8 Oct 2014 18:54:58 +0000 (02:54 +0800)]
vhost: comment identified issues
1) FIXME: concurrent calls to vhost set mem table from different guests
could cause mem_temp to be overrided.
2) TODO: cmpset cost quite some cpu cyles. Allow app to disable this
feature if there is no contention in real workload.
3) FIXME: fix scatter gather mbuf copy to vhost vring chained buffers.
Huawei Xie [Wed, 8 Oct 2014 18:54:53 +0000 (02:54 +0800)]
vhost: supported features
VHOST_SUPPORTED_FEATURES is the feature mask that vhost lib supports.
VHOST_FEATURES is the feature mask vhost currently supports after some features are turned on/off.
Huawei Xie [Wed, 8 Oct 2014 18:54:50 +0000 (02:54 +0800)]
vhost: rename ops registering function
Rename init_virtio_net as rte_vhost_callback_register API.
rte_vhost_callback_register register the callbacks called when a
vhost device is created and ready to be added to data processing core
or is de-actived by guest.
Huawei Xie [Wed, 8 Oct 2014 18:54:48 +0000 (02:54 +0800)]
vhost: get internal ops when registering
vhost_net_device_ops is internal implementation in vhost lib.
register_cuse_device will be vhost driver register API.
There is no need for it to know the internal vhost ops.
Instead, that ops is retrieved in register_cuse_device
through get_virtio_net_callbacks.
Huawei Xie [Wed, 8 Oct 2014 18:54:45 +0000 (02:54 +0800)]
vhost: enqueue/dequeue burst
rte_vhost_enqueue_burst copies host packets to guest.
rte_vhost_enqueue_burst will call virtio_dev_rx and virtio_dev_merge_rx
respectively depending on whether merge-able feature is negotiated or not
in the vhost device.
virtio_dev_merge_tx is renamed to rte_vhost_dequeue_burst.
rte_vhost_dequeue_burst gets to-be-sent packets from guest.
Huawei Xie [Wed, 8 Oct 2014 18:54:41 +0000 (02:54 +0800)]
vhost: return packets to upper layer
This patch makes virtio_dev_merge_tx return the received packets to app layer.
Previously virtio_tx_route was called to route these packets and then free them.
Huawei Xie [Wed, 8 Oct 2014 18:54:46 +0000 (02:54 +0800)]
vhost: move internal structure
The structure virtio_net_config_ll is moved to virtio_net.c.
It is related to internal virtio device management,
so it should not be exposed to other files.
Huawei Xie [Wed, 8 Oct 2014 18:54:39 +0000 (02:54 +0800)]
vhost: remove zero copy memory region generation logic
Currently zero copy feature isn't generic as it couples closely with nic.
It isn't put in the vhost lib in this version.
gpa(guest physical address) to hpa(host physical address) mapping region
logic is removed.
Huawei Xie [Wed, 8 Oct 2014 18:54:38 +0000 (02:54 +0800)]
vhost: remove switching related logics
The following logics will be moved to vhost example:
1. mac learning, which is used to learn the mac address from the first
transmitted packet of guest and bind the vhost device to a queue in a
pool of VMDQ.
2. VMDQ mac/vlan filter: Each pool the vhost device is bind to is
assigned a mac/vlan filter.
3. num_devices is used to specify the maximum vhost devices the nic supports.
Huawei Xie [Wed, 8 Oct 2014 18:54:37 +0000 (02:54 +0800)]
vhost: remove useless code for Rx/Tx
Remove all other codes and only keep virtio_dev_rx, copy_from_mbuf_to_vring,
virtio_dev_merge_rx, virtio_dev_merge_tx.
Previous vhost merge-able feature introduces another version of tx function,
virtio_dev_merge_tx. Actually it is not related to merge-able feature but is
the fix for memcpy between mbuf and vring descriptors.
This lib will create the tx functions based on virtio_dev_merge_tx.
Signed-off-by: Huawei Xie <huawei.xie@intel.com> Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: do not remove code used or moved later]
Huawei Xie [Wed, 8 Oct 2014 18:54:35 +0000 (02:54 +0800)]
vhost: move from examples to dedicated library
Those files will be refactored in subsequent patches to form user space
vhost library.
Makefile and main.h are removed.
main.c is renamed to vhost_rxtx.c and will provide vring enqueue/dequeue API.
virtio-net.h is renamed to rte_virtio_net.h which is the API header file.
Signed-off-by: Huawei Xie <huawei.xie@intel.com> Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: remove from examples Makefile and merge file renaming]
Pablo de Lara [Wed, 1 Oct 2014 09:49:05 +0000 (10:49 +0100)]
examples: use factorized default Rx/Tx configuration
For apps that were using default rte_eth_rxconf and rte_eth_txconf
structures, these have been removed and now they are obtained by
calling rte_eth_dev_info_get, just before setting up RX/TX queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
Pablo de Lara [Wed, 1 Oct 2014 09:49:04 +0000 (10:49 +0100)]
i40e: set default Rx/Tx configuration
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Pablo de Lara [Wed, 1 Oct 2014 09:49:04 +0000 (10:49 +0100)]
ixgbe: set default Rx/Tx configuration
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Pablo de Lara [Wed, 1 Oct 2014 09:49:04 +0000 (10:49 +0100)]
igb: set default Rx/Tx configuration
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Pablo de Lara [Wed, 1 Oct 2014 09:49:04 +0000 (10:49 +0100)]
ethdev: get default Rx/Tx configuration from dev info
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Besides, if a NULL pointer is passed to rte_eth_rx_queue_setup or
rte_eth_tx_queue_setup, these functions get internally the default RX/TX
configuration for the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Pablo de Lara [Wed, 1 Oct 2014 09:49:03 +0000 (10:49 +0100)]
ethdev: reset whole dev info structure before filling
To guarantee that RX/TX configuration structures are reseted
before modifying them, plus the other dev info fields,
dev info structure is zeroed beforehand.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: David Marchand <david.marchand@6wind.com>
app/testpmd: print message if queue start/stop is not supported
Print an error message to the user when trying to start/stop a rx/tx queue and
this function is not supported by the PMD driver. The patch does not check if
the return value is -EINVAL because testpmd is already validating the port and
queue id.
Signed-off-by: Nicolás Pernas Maradei <nico@emutex.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
librte_pmd_pcap driver was opening the pcap/interfaces only at init time and
closing them only when the port was being stopped. This behaviour would cause
problems (leading to segfault) if the user closed the port 2 times. The first
time the pcap/interfaces would be normally closed but libpcap would throw an
error causing a segfault if the closed pcaps/interfaces were closed again.
This behaviour is solved by re-openning pcaps/interfaces when the port is
started (only if these weren't open already for example at init time).
Signed-off-by: Nicolás Pernas Maradei <nico@emutex.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
Pablo de Lara [Wed, 1 Oct 2014 22:27:25 +0000 (23:27 +0100)]
ixgbe: fix build with bypass enabled
Since commit aae1047905621 ("use the right debug macro"),
DEBUGOUT was replaced by PMD_DRV_LOG which requires at least
2 arguments. But the level argument was missing.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
git.droids-corp.org / dpdk.git / log