net/softnic: promote manage API

This API was introduced in 18.08, therefore removing
experimental tag to promote it to stable state.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

ethdev: promote API to get interrupt FD per queue

Remove the experimental tag for rte_eth_dev_rx_intr_ctl_q_get_fd API
that was introduced in 18.11 and have been around for 11 releases.

Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: David Marchand <david.marchand@redhat.com>

eal: fix memory leak when saving arguments

This patch fixes a memleak which was reported in Bugzilla within the
eal_save_args function. This was caused by the function mistakenly
adding -- to the eal args instead of breaking beforehand.

Bugzilla ID: 722
Fixes: 293c53d8b23c ("eal: add telemetry callbacks")

Reported-by: Zhihong Peng <zhihongx.peng@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

config/arm: make N2 crypto an optional feature

Not all Neoverse-N2 CPUs must support the crypto feature/extension
which makes it an optional feature.
Only enable the feature for SoCs which support it.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>

config/arm: split -march into arch and features

Older compilers may not support all arch versions and all features that
the target SoC supports, in which case it's better to figure out the
highest arch version and features that the compiler supports.
Implement a way to achieve this:
1. Find the highest arch version that the compiler supports,
keeping in mind the SoC arch version we're building.
For example, if the SoC arch version is arm8.2-a,
but the compiler only supports arm8.1-a, use arm8.1-a.
On the other hand, if the compiler supports arm8.3-a (or higher),
use armv8.2-a.
2. With the architecture version locked, iterate over SoC features and
use all that are supported.

In all cases, emit a warning if there's something unsupported by the
compiler.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>

examples/service_cores: fix lcore count check

The example has various profiles to run services on specified
number of lcores. Due to incorrect boundary condition, service
can be dispatched to a core that does not exist. This puts main
core into endless wait.

Max available number of service cores is all detected lcores
excluding main core.

Fixes: 7f6ee6aee717 ("examples/service_cores: check cores before run")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

eal: remove deprecated noninclusive API

New API for these were added in 20.11 and the old API was retained
but marked deprecated. Since 21.11 is the next LTS, it is time
to remove the deprecated ones.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>

test/func_reentrancy: free memzones after test

Function reentrancy test limits maximum number of iterations
simultaneously, however it doesn't free the 'fr_test_once'
memzones after the fact, so introduce freeing 'fr_test_once'
in ring/mempool/hash/fbk/lpm_clean.

Meanwhile, add the missing free for test case on main thread.

Fixes: 104a92bd026f ("app: add reentrancy tests")
Fixes: 995eec619024 ("test: clean up memory for function reentrancy test")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@redhat.com>

build: add optional NUMA and CPU counts detection

Add an option to automatically discover the host's NUMA and CPU counts
and use those values for a non cross-build.
Give users the option to override the per-arch default values or values
from cross files by specifying them on the command line with -Dmax_lcores
and -Dmax_numa_nodes.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

test/crypto: fix minsize build

Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:

app/test/test_cryptodev_blockcipher.c:1133:45: error:
‘blk_tcs’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
|         const struct blockcipher_test_case *blk_tcs;
|                                             ^~~~~~~

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

vdpa/mlx5: fix minsize build

Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:

drivers/vdpa/mlx5/mlx5_vdpa_mem.c: In function ‘mlx5_vdpa_mem_register’:
drivers/vdpa/mlx5/mlx5_vdpa_mem.c:183:24: error:
initialization of ‘uint64_t’ {aka ‘long unsigned int’} from ‘void *’
makes integer from pointer without a cast [-Werror=int-conversion]
|         uint64_t gcd = NULL;
|                        ^~~~
drivers/vdpa/mlx5/mlx5_vdpa_mem.c:244:75: error:
‘mode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
|                         klm_size = mode == MLX5_MKC_ACCESS_MODE_KLM ?
|                                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|                               KLM_SIZE_MAX_ALIGN(empty_region_sz) : gcd;
|                               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

regex/mlx5: fix minsize build

Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:

drivers/regex/mlx5/mlx5_regex_fastpath.c:398:17: error:
‘len’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
|                 complete_umr_wqe(qp, sq, &qp->jobs[mkey_job_id], sq->pi,
|                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|                                  klm_num, len);
|                                  ~~~~~~~~~~~~~
drivers/regex/mlx5/mlx5_regex_fastpath.c:315:31: note: ‘len’ was declared here
|         uint32_t klm_num = 0, len;
|                               ^~~

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

net/qede: fix minsize build

Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:

In function ‘__internal_ram_wr_relaxed’,
    inlined from ‘internal_ram_wr’ at ecore_int_api.h:166:2,
    inlined from ‘qede_update_rx_prod.constprop’ at qede_rxtx.c:736:2:
drivers/net/qede/base/bcm_osal.h:136:9: error:
‘rx_prods’ is used uninitialized [-Werror=uninitialized]
|         rte_write32_relaxed((_val), (_reg_addr))
|         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ecore_int_api.h:151:17: note: in expansion of macro ‘DIRECT_REG_WR_RELAXED’
|                 DIRECT_REG_WR_RELAXED(p_hwfn, &((u32 OSAL_IOMEM *)addr)[i],
|                 ^~~~~~~~~~~~~~~~~~~~~
drivers/net/qede/qede_rxtx.c: In function ‘qede_update_rx_prod.constprop’:
drivers/net/qede/qede_rxtx.c:724:33: note: ‘rx_prods’ declared here
|         struct eth_rx_prod_data rx_prods = { 0 };
|                                 ^~~~~~~~

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>

config/ppc: fix build with GCC >= 10

Like for python, multiline statements in meson must either use a
backslash character (explicit continuation) or be enclosed in ()
(implicit continuation).

python PEP8 recommends the latter [1], and it looks like meson had
an issue with backslash before 0.50 [2].

1: https://www.python.org/dev/peps/pep-0008/#multiline-if-statements
2: https://github.com/mesonbuild/meson/commit/90c9b868b20b

Fixes: 394407f50c90 ("config/ppc: ignore GCC 11 psabi warnings")

Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

build: fix essential drivers in disable list

The PCI and vdev bus drivers cannot be disabled for DPDK builds and
special logic is put in place to not skip them when they are specified
in the disable list. This logic is broken though, as the inclusion of
the driver-specific meson.build file is only included in the "else" leg
of the condition check. This means that when they are specified as
disabled the PCI and vdev buses are not disabled, but neither are their
source files compiled.

Fix this by moving the "subdir()" call into the next "if build" block,
ensuring that if not disabled the sources are always included. To take
account of the fact that the subdir call could itself disable the
driver, we add a break call into the following loop to ensure we quickly
fall through to the following block which stops processing appropriately
if the driver is disabled.

Fixes: 2e33309ebe03 ("config: enable/disable drivers in Arm builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>

doc: add release milestones definition

Adding more information about the release milestones.
This includes the scope of change, expectations, etc.

Signed-off-by: Asaf Penso <asafp@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

build: propagate Windows system dependencies to pkg-config

Windows EAL depends on some system libraries. They were linked using
add_project_link_arguments('-l<LIB>'), which prevented meson from adding
them to Libs.private of pkg-config file. As a result, applications using
pkg-config to find DPDK hit link errors, for example:

    librte_eal.a(eal_windows_eal_debug.c.obj) : error LNK2019: unresolved
    external symbol __imp_SymInitialize referenced in function
    rte_dump_stack

Reference required libraries in EAL using ext_deps meson variable.
bus/pci and net/pcap depend on lib/eal and will pull them automatically.
Drop advapi32 dependency, as MinGW locates VirtualAlloc2() dynamically.

Fixes: 2a5d547a4a9b ("eal/windows: implement basic memory management")
Fixes: c91717eb75c8 ("eal/windows: support exit and panic")
Cc: stable@dpdk.org
Reported-by: William Tu <u9012063@gmail.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>

cryptodev: fix indent in Meson file

Fixes: af668035f7f4 ("cryptodev: expose driver interface as internal")

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

net/ice: fix performance with writeback policy

Apply the same fix that for iavf to DCF
commit ead06572bd8f ("net/iavf: fix performance with writeback policy")

Fixes: 4b0d391f0eab ("net/ice: add queue config in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Lijuan Tu <lijuan.tu@intel.com>

net/ixgbe: fix mbuf leak

A local test found that repeated port start and stop operations during
the continuous SSE vector bufflist receiving process will cause the mbuf
resource to run out. The final positioning is when the port is stopped,
the mbuf of the pkt_first_seg pointer is not released. Resources leak.
The patch scheme is to judge whether the pointer is empty when the port
is stopped, and release the corresponding mbuf if it is not empty.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/ixgbe: fix MAC resource leak

In the eth_ixgbevf_dev_init and eth_ixgbe_dev_init functions, memory is
allocated for the MAC address, and the address is stored in the
eth_dev->data->mac_addrs member variable. If the subsequent function is
abnormal, you need to use the rte_free function to release the MAC
address memory.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/ixgbe: fix queue resource leak

In the ixgbevf_dev_start function, after initializing the rxtx queue, if
an exception occurs in the subsequent function, the rxtx queue needs to
be released. The patch solves the problem of queue resource leakage.

Fixes: 0eb609239efd ("ixgbe: enable Rx queue interrupts for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/ixgbe: fix hash handle leak

In the ixgbe_fdir_filter_init and ixgbe_l2_tn_filter_init functions,
after the hash handle is created, the handle is not released in
subsequent abnormal branches.

Fixes: 080e3c0ee989 ("net/ixgbe: store flow director filter")
Fixes: d0c0c416ef1f ("net/ixgbe: store L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support DCF device reset

DCF PMD needs to support rte_eth_dev_reset, the reason is when a DCF
instance is killed, all the flow rules still exists in hardware, when
DCF gets to reconnect, it already lost the flow context, and if the
application wants to create new rules, it may fail due to firmware
reports rules already exist.

The rte_eth_dev_reset API provides a more elegant way for the
application to reset DCF when reconnect happens.

Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/sfc: set FDIR bit for flow mark in EF100 Rx

According to flow action MARK definition, PMDs must set both
PKT_RX_FDIR and PKT_RX_FDIR_ID if the packet contains a mark.

Fixes: 1aacc3d388d3 ("net/sfc: support user mark and flag Rx for EF100")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

net/hns3: fix Tx push capability

This patch fixes Tx push capability to be compatible with Kunpeng 920,
as Tx push is only supported on Kunpeng 930.

Fixes: 23e317dd1fbf ("net/hns3: support Tx push quick doorbell for performance")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/hns3: fix taskqueue pair reset command

This new taskqueue pair reset command is used incorrectly, resulting in
the new command not taking effect.

This patch fixes the incorrect use.

Fixes: 6911e7c22c61 ("net/hns3: fix long task queue pairs reset time")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/hns3: fix queue flow action validation

The used_rx_queues only takes effect after device is started, and
its value is incorrect before the device is started. Therefore, it
is not suitable for flow action to use it to verify the queue index
before the device is started.

E.g. Enable dedicated queue in bonding device will configure a queue
flow action before start its slave devices. The above problem will
make this reasonable flow action configuration fail.

This patch use the nb_rx_queues from the configuration phase to
achieve verification.

Fixes: a951c1ed3ab5 ("net/hns3: support different numbers of Rx and Tx queues")
Fixes: f8e7fcbfd0b8 ("net/hns3: support flow action of queue region")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/pcap: improve Rx statistics

In the receiving direction, if alloc mbuf or jumbo process failed, there
is no err_pkts count, which makes it difficult to locate the problem.
Because alloc mbuf failed, the rx_nombuf field is counted.

Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/pcap: fix resource leakage on port probe

When the port is probed, if the eth_from_pcaps function fails, the
previously opened pcap resources are not released, causing resource
leakage.

The patch solves the problem of resource leakage caused by abnormal
branch exit during the port probe process.

Fixes: 4c173302c307 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/axgbe: fix unreleased lock in I2C transfer

The lock pdata->i2c_mutex is not released if the function return in
these two patched branches, which may lead to deadlock problem if
this lock is acquired again.

Bugzilla ID: 777
Fixes: 4ac7516b8b39 ("net/axgbe: add phy init and related APIs")
Cc: stable@dpdk.org
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: fix bonding driver name

The documentation for the bond driver lists the name as `net/bond`
however the driver should be `net/bonding`.

Fixes: 89c67ae2cba7 ("doc: remove references to make from prog guide")
Cc: stable@dpdk.org
Signed-off-by: Ben Magistro <koncept1@gmail.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/af_xdp: fix zero-copy Tx queue drain

Call xsk_ring_prod__submit() before kick_tx() so that the kernel
consumer sees the updated state of Tx ring. Otherwise, Tx packets are
stuck in the ring until the next call to af_xdp_tx_zc().

Fixes: d8a210774e1d ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>

app/testpmd: support multi-process

This patch adds multi-process support for testpmd.
For example the following commands run two testpmd
processes:

 * the primary process:

./dpdk-testpmd --proc-type=auto -l 0-1 -- -i \
   --rxq=4 --txq=4 --num-procs=2 --proc-id=0

 * the secondary process:

./dpdk-testpmd --proc-type=auto -l 2-3 -- -i \
   --rxq=4 --txq=4 --num-procs=2 --proc-id=1

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>

net/bnxt: fix double allocation of ring groups

After commit "d68249f88266", driver allocates ring groups in
bnxt_alloc_hwrm_rx_ring(). But during port start, driver invokes
bnxt_alloc_hwrm_rx_ring() followed by bnxt_alloc_all_hwrm_ring_grps().
This will cause the FW command failure in bnxt_alloc_all_hwrm_ring_grps()

To fix this, just don't create the ring group if it is already created.

Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix ring group free

Added an invalid fw_grp_id check inside bnxt_hwrm_ring_grp_free().
This will prevent invalid fw_grp_id to be passed to the FW which can
result in an error.
This fixes the following failure in the "port stop" -> "port start"
sequence:

bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204
bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204

Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: fix VLAN indication in Rx mbuf

Fix to ignore the RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
when the firmware doesn't support the VLAN strip offload.

Fixes: 2eb53b134aae ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: check FW capability for VLAN offloads

VLAN offload capability may be disabled in the FW. The driver
should not attempt to override or utilize this feature in such
scenarios since it will not work as expected.

Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix mbuf VLAN in scalar Rx

In the scalar Rx path, for the VLAN packet, TCI is not saved in
the "mbuf->vlan_tci", however the STRIPPED offload flag is set
along with PKT_RX_VLAN flag.

Fixes: c1b33d40315f ("net/bnxt: use table based mbuf flags handling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/ixgbe: fix Rx multicast statistics after reset

In the implementation of the VF driver ixgbevf_update_stats to obtain
statistics, the multicast count hw_stats->vfmprc has been obtained,
but it is not cleared in the corresponding ixgbevf_dev_stats_reset
interface.

Fixes: abf7275bbaa2 ("ixgbe: move to drivers/net/")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

net/iavf: fix overflow in maximum packet length config

The len variable, used in the computation of max_pkt_len could
overflow, if used to store the result of the following computation:

rxq->rx_buf_len * IAVF_MAX_CHAINED_RX_BUFFERS

Since, we could define the mbuf size to have a large value (i.e 13312),
and IAVF_MAX_CHAINED_RX_BUFFERS is defined as 5, the computation
mentioned above could potentially result in a value which might be
bigger than MAX_USHORT.

The result will be that Jumbo Frames will not work properly

Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix queue config in DCF

When DCF configures rx_queues, it may cause the pointer of
rx_queues to go out of bounds.

This patch expands the scope of the judgment condition to
fix this issue.

Fixes: 4b0d391f0eab ("net/ice: add queue config in DCF")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix deadlock on flow query

Default case of the switch statement causes deadlock because it returns
without unlocking the 'flow_ops_lock' lock. Fixing it.

Fixes: 0d6ef740e411 ("net/ice: support flow ops thread safe")
Cc: stable@dpdk.org
Signed-off-by: Yu Wenjun <yuwenjun0x@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix default RSS hash for IP fragments

Previously, hash value is calculated by src IP address, dst IP address
and IP ID. However, default RSS field only needs src and dst IP address.

This patch removes IP ID from default RSS field for IP fragment packets
to improve default RSS configuration.

Fixes: 4027fffe86f4 ("net/ice: support default RSS for IP fragment packet")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix default RSS hash for IP fragments

Previously, hash value is calculated by src IP address, dst IP address
and IP ID. However, default RSS field only needs src and dst IP address.

This patch removes IP ID from default RSS field for IP fragment packets
to improve default RSS configuration.

Fixes: 9e29a278bc0c ("net/iavf: support default RSS for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: support flow director for IPv6 fragments

This patch adds L3 fields FDIR support for IPv6 fragment packets.

Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix flow director L3 field for IPv4 fragments

Originally, the value of field_selector for IPV4_FRAG header hdr1 is
the same as the previous header hdr2. For IPv4 packets, field_selector
for hdr2 can be any value between 0 and 4, depending on the selected
field. Actually, this value for IPV4_FRAG should be constant 0,
which denotes the field packet ID.

This patch adds an assignment to hdr1->field_selector to make sure that
it is always 0.

Fixes: 3334513ef484 ("net/iavf: support flow director for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix RXDID default value in DCF

Since DPDK 20.11 the default rxdid is changed from 16 to 22, but the
DCF data path didn't change, the patch fix the gap.

Fixes: 12443386a0b0 ("net/ice: support flex Rx descriptor RxDID22")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>

net/ice: fix memzone leak after device init failure

When flow engine initialization or FXP resource reset failed, it needs
to free the memory zone and unregister the interrupt callback.

Bugzilla ID: 752
Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Fixes: 7615a6895009 ("net/ice: rework for generic flow enabling")
Fixes: 7edc7158d771 ("net/ice: cleanup RSS/FDIR profile on device init")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice/base: support flow director for IPv6 fragments

Add L2 and L3 FDIR field support for IPv6 fragment packets.

Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

maintainers: update for mlx4/mlx5 net drivers

For net/mlx4:
    - removing Shahaf Shuler
    - adding Viacheslav Ovsiienko

For net/mlx5:
    - removing Shahaf Shuler

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/nfp: fix minimum descriptor sizes

The NFP4000/6000 supports a minimum of 256 Tx/Rx descriptors and not 64.
Before this patch when a DPDK application configured < 256 Tx
descriptors the hardware read/write pointers would be unmasked and not
wrapped at the expected size of the ring. The PMD logic to determine the
amount of free space in the Tx ring is incompatible with the unmasked
hwqueue pointers and this will result in the PMD not updating the
read pointer at all.The knock-on effect is that under high load the
PMD will potentially re-use a Tx descriptor before the hw has had a
chance to process that particular descriptor. This issue can manifest as
a DMA error when the hardware tries to perform a DMA with info from a
partially populated descriptor.

Fixes: defb9a5dd156 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>

maintainers: update for NFP

Some of Netronome's activities and people have moved over to Corigine,
including NFP PMD maintenance and myself.

Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>

app/testpmd: add option for number of flows in flowgen

Make number of flows in flowgen configurable by setting parameter
--flowgen-flows=N.

Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>

net/ipn3ke: change experimental symbol to internal

'ipn3ke_bridge_func' is a global variable and it used in net & raw
drivers.
It's only used for drivers, so change it from EXPERIMENTAL to INTERNAL.

Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

crypto/dpaa_sec: support PDCP short MAC-I

This patch add PDCP security short MAC-I support for
dpaa_sec driver.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support PDCP short MAC-I

This patch add PDCP short mac support in dpaa2_sec driver.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: support PDCP short MAC-I

This patch add support to test the PDCP short MAC
packets in crypto.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

security: support PDCP short MAC-I

This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol offload support.

ShortMAC-I is the 16 least significant bits of calculated MAC-I. Usually
when a RRC message is exchanged between UE and eNodeB it is integrity &
ciphered protected.

MAC-I = f(key, varShortMAC-I, count, bearer, direction).
Here varShortMAC-I is prepared by using (current cellId, pci of source cell
and C-RNTI of old cell). Other parameters like count, bearer and
direction set to all 1.

crypto-perf app is updated to take short MAC as input mode.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support integrity only PDCP

To support short MAC-I, integrity only case is required
to be supported for PDCP.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>

common/cnxk: fix attaching NPA LF to CPT VF

ATTACH_RESOURCES mailbox for CPT LFs is being called without
setting modify bit. Because of this previously attached NPA LF
to the CPT VF is getting removed, when only CPT VF is whitelisted.
This patch fixes the same.

Fixes: c045d2e5cbbc ("common/cnxk: add CPT configuration")
Cc: stable@dpdk.org
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: add error packet counters

This patch add support to also counter err pkt counter per queue.
This also enhances few related debug prints.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: force inline keys to save space

This patch improve storage and performance by force inline
of the keys.

Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/dpaax/caamflib: fix IV for short MAC-I in SNOW3G

The logic was incorrectly doing conditional swap. It need to
be bit swap always.

Fixes: 73a24060cd70 ("crypto/dpaa2_sec: add sample PDCP descriptor APIs")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/dpaax/caamflib: remove some inline keys

The space in descriptor buffer is scarce as it is limited to
64 words for platforms except ERA10 (which has 128).

As the descriptors are processed with QI, it adds some words
to the descriptor which is passed.

Some descriptors used for SDAP were using too much words reaching
the limit.

This patch reduces the number of words used by removing the inlining
of some keys (done for performance) in order to have working
descriptors.

Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/dpaax/caamflib: remove DPOVRD clear for SDAP

For SDAP, we are not using the protocol operation to perform
4G/LTE operation so the DPOVRD option is not used.

Removing it save some space in the descriptor buffer and
execution time.

Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/dpaax/caamflib: load correct HFN from desc buffer

The offset of the HFN word and Bearer/Dir word is different
depending on type of PDB.

The wrong value was used.

This patch address this issue

Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support AES-CMAC integrity check

This patch adds support for AES_CMAC integrity
in non-security mode.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support AES-XCBC-MAC

This patch adds support for AES-XCBC-MAC algo.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support non-HMAC auth algos

This patch add support for non-HMAC, md5, shax algos.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support DES-CBC

add DES-CBC support and enable available cipher-only
test cases.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

cryptodev: expose driver interface as internal

The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

examples/fips_validation: remove illegal usage of API

Some of the cryptodev APIs are not allowed to be used
by application directly. Hence removing the usage of
1. queue_pair_release: it is not required, as configure
   of queue pair release the previous queue pairs and the
   dev is not directly exposed to application, hence cannot
   use its ops from app.
2. rte_cryptodev_stop: it can be used directly without
   checking if the device is started or not.
3. rte_cryptodev_pmd_destroy: application should use
   rte_cryptodev_close instead.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

cryptodev: rename function to check device validity

The API rte_cryptodev_pmd_is_valid_dev, can be used
by the application as well as PMD to check whether
the device is valid or not. Hence, _pmd is removed
from the API.
The applications and drivers which use this API are
also updated.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

test/crypto: remove illegal PMD header include

rte_cryptodev_pmd.h is an interface between
driver and library and it is mentioned in the
file that application cannot use it directly.
Hence, removing the include.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

crypto/cnxk: add feature flag for cn9k lookaside IPsec

Update device feature flag to support lookaside IPsec for
cn9k.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/cnxk: update tailroom requirement

Update min tailroom to reflect IPsec additions.
PMD crypto_cn9k & crypto_cn10k would have packet
grow into tailroom post IPsec processing.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/cnxk: add cn9k lookaside IPsec datapath

Adds support for cn9k lookaside enqueue and dequeue
operations.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/cnxk: add cn9k security session operations

Add security session ops.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

common/cnxk: add cn9k IPsec microcode defines

Microcode IE opcodes support IPsec operations. Add defines
and structs defined by microcode.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/cnxk: add cn9k security context

Add security ctx in cn9k crypto PMD.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/openssl: fix CCM processing 0 length source

When given a source length 0 for CCM, the encryption and decryption
functions did not call the EVP_ENCRYPTUPDATE/EVP_DECRYPTUPDATE functions
with a src and dst, causing some FIPS validation failures for testcases
with PLen=0:

process_openssl_auth_encryption_ccm() line 1131:
Process openssl auth encryption ccm failed

Fixes: 1a4998dc4d94 ("crypto/openssl: support AES-CCM")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

test/crypto: refactor scheduler workers init

Previously, the scheduler unit test only created and attached 1 or 2
AESNI-MB cryptodev PMDs as workers if less than 2 AESNI-MB PMDs had
already been initialized.

This commit changes this to always create and attach 2 new AESNI-MB
cryptodev PMDs, regardless of previously initialized AESNI-MB PMDs.

Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

config/ppc: ignore GCC 11 psabi warnings

Suppress the gcc warning "note: the layout of aggregates containing
vectors with 4-byte alignment has changed in GCC 5" on POWER systems
by setting "-Wno-psabi".  Warning was originally added to gcc in
commit https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=9832651 to warn
of the vector alignment changes introduced in GCC 5.  Older gcc
versions forced vector alignment to 16 bytes due to requirements for
POWER 6 and earlier CPUs, but these restrictions don't apply to CPUs
supported by DPDK.

Bugzilla ID: 739
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>

eal/ppc: ignore GCC 10 stringop-overflow warnings

Suppress gcc warning "warning: writing 16 bytes into a region of
size 0" for users of the POWER rte_memcpy() function.  Existing
rte_memcpy() code takes different code paths based on the actual
size of the move so the warning is already addressed. See also
commit b5b3ea803e47 ("eal/x86: ignore gcc 10 stringop-overflow warnings")

Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>

crypto/cnxk: add dual submission in cn9k

Submit two instructions with one LMTST operation.
Also updated dequeue path to have local var for constants.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: support ucode API change

Add support for API changes in ucode 1.13

Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: remove redundant assignment

The assignment to -1 is not required. Remove the same.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: remove redundant memcpy of IV for ZUC

Swap is not required for ZUC. Update IV updation
sequence to remove the redundant swap in case of ZUC.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: remove redundant SNOW3G decrypt

The opcode for encryption & decryption is the
same and single routine would be able to handle
both encryption and decryption operations.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/cnxk: update to v1.16 ucc codes

Update to v1.16 microcode completion codes.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

common/cnxk: update to v1.13 ZUC API

Add support for ZUC API change in ucode 1.13

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/mlx5: fix timestamp format configuration

This patch adds support for the timestamp format settings for
the receive and send queues. If the firmware version x.30.1000
or above is installed and the NIC timestamps are configured
with the real-time format, the default zero values for newly
added fields cause the queue creation to fail.

The patch queries the timestamp formats supported by the hardware
and sets the configuration values in queue context accordingly.

Fixes: 6152534e211e ("crypto/mlx5: support queue pairs operations")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

event/cnxk: add cn10k crypto adapter fast path

Set crypto adapter enqueue and dequeue operations for CN10K.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add cn10k crypto adapter fast path

Added crypto adapter enqueue and dequeue operations for CN10K.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anoob Joseph <anoobj@marvell.com>

event/cnxk: add cn9k crypto adapter fast path

Set crypto adapter enqueue and dequeue operations for CN9K.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add cn9k crypto adapter fast path

Added crypto adapter enqueue and dequeue operations for CN9K.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anoob Joseph <anoobj@marvell.com>

event/cnxk: add crypto adapter operations

Added eventdev ops required to initialize crypto adapter.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>