Shreyansh Jain [Mon, 15 Oct 2018 12:01:56 +0000 (17:31 +0530)]
fslmc: enable dpaax library
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Shreyansh Jain [Mon, 15 Oct 2018 12:01:54 +0000 (17:31 +0530)]
common/dpaax: add library for PA/VA translation table
A common library, valid for dpaaX drivers, which is used to maintain
a local copy of PA->VA translations.
In case of physical addressing mode (one of the option for FSLMC, and
only option for DPAA bus), the addresses of descriptors Rx'd are
physical. These need to be converted into equivalent VA for rte_mbuf
and other similar calls.
Using the rte_mem_virt2iova or rte_mem_virt2phy is expensive. This
library is an attempt to reduce the overall cost associated with
this translation.
A small table is maintained, containing continuous entries
representing a continguous physical range. Each of these entries
stores the equivalent VA, which is fed during mempool creation, or
memory allocation/deallocation callbacks.
Jeff Guo [Tue, 16 Oct 2018 11:42:33 +0000 (19:42 +0800)]
vfio: fix build with Linux < 4.0
Since the older kernel version do not implement the device request
interface for vfio, so when build on the kernel < v4.0.0, which is
the version begin to add the device request interface, it will
throw the error to show “VFIO_PCI_REQ_IRQ_INDEX” is undeclared.
This patch aim to fix this compile issue by add the macro
“HAVE_VFIO_DEV_REQ_INTERFACE” after checking the kernel version.
Jeff Guo [Thu, 4 Oct 2018 06:44:43 +0000 (14:44 +0800)]
vfio: handle hotplug request notifier
When device is be hot-unplugged, the vfio kernel module will sent req
notifier to request user space to release the allocated resources at
first. After that, vfio kernel module will detect the device disappear,
and then delete the device in kernel.
This patch aim to add req notifier processing to enable hotplug for vfio.
By enable the req notifier monitoring and register the notifier callback,
when device be hot-unplugged, the hot-unplug handler will be called to
process hotplug for vfio.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Jeff Guo [Thu, 4 Oct 2018 06:44:42 +0000 (14:44 +0800)]
bus/pci: add VFIO request interrupt handle to device
There are some extended interrupt types in vfio pci device except from the
existing interrupts, such as err and req notifier, they could be useful for
device error monitoring. And these corresponding interrupt handler is
different from the other interrupt handler that register in PMDs, so a new
interrupt handler should be added. This patch will add specific req handler
in generic pci device.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Jeff Guo [Thu, 4 Oct 2018 06:44:41 +0000 (14:44 +0800)]
eal: modify device event process function
This patch modify the device event callback process function name to be
more explicit, change the variable to be const. And more, because not only
eal device helper will use the callback, but also vfio bus will use the
callback to handle hot-unplug, so exposure the API out from private eal.
The bus drivers and eal device would directly use this API to process
device event callback.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:27 +0000 (19:27 +0800)]
app/testpmd: use hotplug failure handler
This patch use testpmd for example, to show how an app smoothly handle
failure when device be hot-unplug. Except that app should enabled the
device event monitor and register the hotplug event’s callback, it also
need enable hotplug handle mechanism before running. Once app detect the
removal event, the hot-unplug callback would be called. It will first stop
the packet forwarding, then stop the port, close the port, and finally
detach the port to clean the device and release the resources.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:26 +0000 (19:27 +0800)]
eal: add failure handling for hot-unplug
The mechanism can initially register the sigbus handler after the device
event monitor is enabled. When a sigbus event is captured, it will check
the failure address and accordingly handle the memory failure of the
corresponding device by invoke the hot-unplug handler. It could prevent
the application from crashing when a device is hot-unplugged.
By this patch, users could call below new added APIs to enable/disable
the device hotplug handle mechanism. Note that it just implement the
hot-unplug handler in these functions, the other handler of hotplug, such
as handler for hotplug binding, could be add in the future if need:
- rte_dev_hotplug_handle_enable
- rte_dev_hotplug_handle_disable
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:24 +0000 (19:27 +0800)]
bus/pci: support sigbus handler
This patch implements the ops for the PCI bus sigbus handler. It finds the
PCI device that is being hot-unplugged and calls the relevant ops of the
hot-unplug handler to handle the hot-unplug failure of the device.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Shaopeng He <shaopeng.he@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:23 +0000 (19:27 +0800)]
bus: add sigbus handler
When a device is hot-unplugged, a sigbus error will occur of the datapath
can still read/write to the device. A handler is required here to capture
the sigbus signal and handle it appropriately.
This patch introduces a bus ops to handle sigbus errors. Each bus can
implement its own case-dependent logic to handle the sigbus errors.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Shaopeng He <shaopeng.he@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:22 +0000 (19:27 +0800)]
bus/pci: support hot-unplug handler
This patch implements the ops to handle hot-unplug on the PCI bus.
For UIO PCI, it could avoids BARs read/write errors by creating a
new dummy memory to remap the memory where the failure is. For VFIO
or other kernel driver, it could specific implement function to handle
hot-unplug case by case.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Shaopeng He <shaopeng.he@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Jeff Guo [Mon, 15 Oct 2018 11:27:21 +0000 (19:27 +0800)]
bus: add hot-unplug handler
A hot-unplug failure and app crash can be caused, when a device is
hot-unplugged but the application still try to access the device
by reading or writing from the BARs, which is already invalid but
still not timely be unmap or released.
This patch introduces bus ops to handle hot-unplug failures. Each
bus can implement its own case-dependent logic to handle the failures.
Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch introduces a new table action for packet decapsulation
which removes n bytes from the start of the input packet. The n
is read from the current table entry. The following mbuf fields
are updated by the action: data_off, data_len, pkt_len.
This patch introduces the packet tag table action which attaches
a 32-bit value (the tag) to the current input packet. The tag is
read from the current table entry. The tag is written into the
mbuf->hash.fdir.hi and the flags PKT_RX_FDIR and PKT_RX_FDIR_ID
are set into mbuf->ol_flags.
Fan Zhang [Fri, 28 Sep 2018 12:26:09 +0000 (13:26 +0100)]
pipeline: add symmetric crypto table action
This patch adds the symmetric crypto action support to pipeline
library. The symmetric crypto action works as the shim layer
between pipeline and DPDK cryptodev and is able to interact with
cryptodev with the control path requests such as session
creation/deletion and data path work to assemble the crypto
operations for received packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fan Zhang [Mon, 1 Oct 2018 10:02:23 +0000 (11:02 +0100)]
port: add symmetric crypto
This patch adds the symmetric crypto support to port library.
The crypto port acts as a shim layer to DPDK cryptodev library and
supports in-place crypto workload processing.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Support for validating and mapping rte flow rule with
ACL table match is added.
As part of this support below utility functions
been added
flow_rule_match_get()
flow_rule_match_acl_get()
flow_item_skip_disabled_protos()
flow_item_proto_preprocess()
flow_item_is_proto()
flow_item_raw_preprocess()
Change dev_name, action_profile_name and key_mask
from char* type to arary type of structures
softnic_port_in_params, softnic_port_out_params
and softnic_table_hash_params.
Kevin Laatz [Tue, 25 Sep 2018 15:32:28 +0000 (16:32 +0100)]
lib/librte_table: add hash function headers
This commit adds rte_table_hash_func.h and rte_table_hash_func_arm64.h to
librte_table. This reduces code duplication by removing duplicate header
files within two folders and consolidating them into a single one. This
also adds a scalar implementation of the x86_64 intrinsic for crc32 as a
generic fallback.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Acked-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Krzysztof Kanas [Fri, 17 Aug 2018 11:39:19 +0000 (13:39 +0200)]
app/testpmd: add TM commands to mark packets
Add following testpmd run-time commands to support test of TM packet
marking:
set port tm mark ip_ecn <port_id> <green> <yellow> <red>
set port tm mark ip_dscp <port_id> <green> <yellow> <red>
set port tm mark vlan_dei <port_id> <green> <yellow> <red>
Signed-off-by: Krzysztof Kanas <krzysztof.kanas@caviumnetworks.com>
Rosen Xu [Thu, 16 Aug 2018 01:14:16 +0000 (09:14 +0800)]
ethdev: expand queue threshold size of RED parameters
There's very commonly that more than 4G DDR memory in NIC for HQoS,
so right now the queue threshold size of RED needs to expand to
uint64_t. This patch fixes it.
eal: use correct data type for bitmap slab operations
Currently, slab operations use unsigned long data type for 64-bit slab
related operations. On target 'i686-native-linuxapp-gcc', unsigned long
is 32-bit and thus, slab operations breaks on this target. Changing slab
operations to use unsigned long long for correct functioning on
all targets.
Ivan Malov [Thu, 11 Oct 2018 14:51:13 +0000 (15:51 +0100)]
net/sfc: allow to query RSS key and HF when RSS is disabled
If global RSS is not enabled in the multiqueue mode setting,
it will not be possible to change RSS configuration. However,
querying default RSS settings should be possible in any case since
it may be needed by RTE flow API users to find out what RSS settings
will be used by default for a flow rule with RSS action if custom
RSS key and hash function choice are not specified.
Fixes: 63ab5e0c8fda ("net/sfc: use zero RSS channels as disabled RSS indicator") Cc: stable@dpdk.org Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Malov [Thu, 11 Oct 2018 14:51:12 +0000 (15:51 +0100)]
net/sfc: allow to query RSS key and HF in isolated mode
Isolated mode prevents global RSS from being enabled and configured.
However, an application may need to query default RSS key and hash
functions when a flow rule with RSS action is added which does not
contain custom RSS key or hash function choice. In this case
global RSS key and hash functions will be used to handle the rule,
and there should be some way for the application to query these
global default settings to clarify expectations on the traffic
distribution.
Fixes: 84a9b48128c1 ("net/sfc: support flow API isolated mode") Cc: stable@dpdk.org Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Malov [Thu, 11 Oct 2018 14:49:30 +0000 (15:49 +0100)]
net/sfc: do not skip RSS configuration step on reconfigure
Earlier a patch was made to support change of Rx queue
number. That patch added goto label in wrong place
because reconfiguration with the same number of queues
results in skipping not only queue init but also RSS
settings. If a user configures device with RSS multiqueue
mode and then wants to stop it and reconfigure without RSS,
this change will be ignored and RSS will continue working.
Move the label in the right place and rename it to describe it.
Fixes: 55a539003f1a ("net/sfc: support changing the number of receive queues") Cc: stable@dpdk.org Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
net/e1000: enable MSI-x for linkup and other events in 82574
Linux supports 82574 MSI-x interrupt for linkup and other link
conditions. Enable the same feature in the e1000 PMD in order to
allow this card to work properly, as it requires interrupt
handling for link negotiations among other things.
net/e1000: do not error out if Rx drop enable is set
rx_drop_en is an optimization that does nothing on single-queue
devices like e1000. Do not force applications that do not care to
select per-devices optimizations flags by returning an error, just
log it and carry on.
Fixes: 805803445a02 ("e1000: support EM devices (also known as e1000/e1000e)") Cc: stable@dpdk.org Signed-off-by: Luca Boccassi <bluca@debian.org> Acked-by: Wei Zhao <wei.zhao1@intel.com>
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions set_ipv4_src ipv4_addr 172.168.0.1 /
set_ipv4_dst ipv4_addr 172.168.10.1 /
set_tp_dst port 9000 /
set_tp_src port 700 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com> Acked-by: Yongseok Koh <yskoh@mellanox.com>
Moti Haimovsky [Thu, 11 Oct 2018 10:48:39 +0000 (10:48 +0000)]
net/mlx5: support e-switch TCP-flags flow filter
This patch adds support for offloading flow rules with TCP-flags
filter to mlx5 eswitch Hardwrae.
With mlx5 it is possible to offload a limited set of flow rules to
the mlxsw (or e-switch) using the DPDK flow commands using the
"transfer" attribute. This set of flow rules also supports filtering
according to the values found in the TCP flags.
This patch implements this offload capability in the mlx5 PMD under
transfer attribute.
Shahaf Shuler [Mon, 8 Oct 2018 06:28:17 +0000 (09:28 +0300)]
net/mlx5: always use representor ifindex for ioctl
In the current code, on some cases the representor ethdev is using the
PF interface to query some link status information or pause parameters.
It was done because in previous kernel versions there was no support
from the kernel for the representor info.
Using the PF i/f for such ioctl is error prone and not always working
because:
* On some cases there is no PF at all, only representors (e.g Bluefield
with host representors)
* Query the up/down status from representor and link status from PF
is in-consist
* PF link is down doesn't necessarily means representor is down.
* setting different pause configuration for the PF and the
representors will result on undefined behaviour
Making the code cleaner and more robust by using only the representor
i/f for the ioctl. whatever the kernel will provide on this query will
be used. No need to do W.A. for kernel missing functionality.
Note:
1. Setting pause parameters will obviously won't work on representors
2. Old kernel will not report all the possible representor info
Fixes: 2b7302638898 ("net/mlx5: probe all port representors") Cc: stable@dpdk.org Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Jens Freimann [Wed, 3 Oct 2018 18:57:11 +0000 (20:57 +0200)]
app/testpmd: add noisy neighbour forwarding mode
This adds a new forwarding mode to testpmd to simulate
more realistic behavior of a guest machine engaged in receiving
and sending packets performing Virtual Network Function (VNF).
The goal is to enable a simple way of measuring performance impact on
cache and memory footprint utilization from various VNF co-located on
the same host machine. For this it does:
* Buffer packets in a FIFO:
Create a fifo to buffer received packets. Once it flows over put
those packets into the actual tx queue. The fifo is created per tx
queue and its size can be set with the --noisy-tx-sw-buffer-flushtime
commandline parameter.
A second commandline parameter is used to set a timeout in
milliseconds after which the fifo is flushed.
--noisy-tx-sw-buffer-size [packet numbers]
Keep the mbuf in a FIFO and forward the over flooding packets from the
FIFO. This queue is per TX-queue (after all other packet processing).
--noisy-tx-sw-buffer-flushtime [delay]
Flush the packet queue if no packets have been seen during
[delay]. As long as packets are seen, the timer is reset.
Add several options to simulate route lookups (memory reads) in tables
that can be quite large, as well as route hit statistics update.
These options simulates the while stack traversal and
will trash the cache. Memory access is random.
* simulate route lookups:
Allocate a buffer and perform reads and writes on it as specified by
commandline options:
--noisy-lkup-memory [size]
Size of the VNF internal memory (MB), in which the random
read/write will be done, allocated by rte_malloc (hugepages).
--noisy-lkup-num-writes [num]
Number of random writes in memory per packet should be
performed, simulating hit-flags update. 64 bits per write,
all write in different cache lines.
--noisy-lkup-num-reads [num]
Number of random reads in memory per packet should be
performed, simulating FIB/table lookups. 64 bits per read,
all write in different cache lines.
--noisy-lkup-num-reads-writes [num]
Number of random reads and writes in memory per packet should
be performed, simulating stats update. 64 bits per read-write, all
reads and writes in different cache lines.
Signed-off-by: Jens Freimann <jfreimann@redhat.com> Acked-by: Kevin Traynor <ktraynor@redhat.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Brian Archbold [Wed, 22 Aug 2018 06:05:06 +0000 (07:05 +0100)]
app/testpmd: fix duplicate exit
In interactive mode, when the "quit" command is issued, pmd_test_exit()
is being called twice, once through the "quit" command and the other
after termination of prompt.
Remove duplicated exit routine by removing call from "quit" command.
Steps to reproduce:
- Run testpmd in interactive mode.
- type "quit".
Fixes: af75078fece3 ("first public release") Cc: stable@dpdk.org Signed-off-by: Brian Archbold <brian.archbold@intel.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Emma Finn [Tue, 25 Sep 2018 10:32:45 +0000 (11:32 +0100)]
app/testpmd: add new command for show port info
existing testpmd command "show port info" is too verbose.
Added a new summary command to print brief information on ports.
console output:
testpmd> show port summary all
Number of available ports: 2
Port MAC Address Name Driver Status Link
0 11:22:33:44:55:66 0000:07:00.0 net_i40e up 40000Mbps
1 66:55:44:33:22:11 0000:07:00.1 net_i40e up 40000Mbps
Signed-off-by: Emma Finn <emma.finn@intel.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Yongseok Koh [Mon, 8 Oct 2018 18:02:19 +0000 (18:02 +0000)]
net/mlx5: fix errno values for flow engine
Fixes: af689f1f04c2 ("net/mlx5: support flow Ethernet item along with drop action") Fixes: 919d53ad78d2 ("net/mlx5: fix count query when flow has not counter") Cc: stable@dpdk.org Signed-off-by: Yongseok Koh <yskoh@mellanox.com> Acked-by: Ori Kam <orika@mellanox.com>
Jerin Jacob [Tue, 9 Oct 2018 14:18:18 +0000 (14:18 +0000)]
app/testpmd: collect bad outer L4 checksum for csum engine
Collect and prints the statistics for PKT_RX_EL4_CKSUM_BAD
errors.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Introduced DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags and
PKT_TX_OUTER_UDP_CKSUM mbuf ol_flags to enable Tx outer UDP
checksum offload.
To use hardware Tx outer UDP checksum offload, the user needs to,
- enable following in mbuf:
a) fill outer_l2_len and outer_l3_len in mbuf
b) set the PKT_TX_OUTER_UDP_CKSUM flag
c) set the flag PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6
- configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slow path
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This action is useful for offloading loopback mode, where the hardware
will swap source and destination MAC addresses in the outermost Ethernet
header before looping back the packet. This action can be used in
conjunction with other rewrite actions to achieve MAC layer transparent
NAT where the MAC addresses are swapped before either the source or
destination MAC address is rewritten and NAT is performed.
Must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error should be returned by the
PMDs.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
net/cxgbe: add flow actions to modify IP and TCP/UDP port
Query firmware for the new filter work request to offload flows with
actions to modify IP and TCP/UDP port addresses. When available,
translate IP and TCP/UDP port address modify actions to internal
hardware specification and offload the flow to hardware.
git.droids-corp.org / dpdk.git / log