This patch adds multiple process support for hns3 PMD driver.
Multi-process support selection queue by configuring RSS or
flow director. The primary process supports various management
ops, and the secondary process only supports queries ops.
The primary process notifies the secondary processes to start
or stop tranceiver.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds dev_start, dev_stop, dev_configure, promiscuous_enable,
promiscuous_disable, allmulticast_enable, allmulticast_disable,
dev_infos_get related function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current version, we only support VF device is bound to vfio_pci or
igb_uio and then driven by DPDK driver when PF is driven by kernel mode
hns3 ethdev driver, VF is not supported when PF is driven by DPDK
driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for MAC PAUSE flow control and priority flow
control(PFC).
MAC PAUSE flow control features:
All user priorities(up) are mapped to tc0. It supports settings of flow
mode and pause time.
DCB features:
Up can be mapped to other tc driver permits according to business
requirement. We can config DCB information and enable PFC by
rte_eth_dev_configure interface. Besides, enabling flow control of a
priority is supported by rte_eth_dev_priority_flow_ctrl_set interface.
we can also set flow mode and pause time by
rte_eth_dev_priority_flow_ctrl_set. we do not support manual setting of
ETS, but driver equally distributes bandwidth for each tc according to
number of used tc.
In addition, flow control function by default is turned off to ensure
that app startup state is the same each time.
Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for rte_flow_ops operation and flow
director of hns3 PMD driver.
Flow director feature is only supported in hns3 PF driver.
It supports the network L2\L3\L4 and tunnel packet creation,
deletion, flushing, and querying hit statistics.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following mac address related operations defined in
struct eth_dev_ops: mac_addr_add, mac_addr_remove, mac_addr_set
and set_mc_addr_list.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the initialization of hns3 PF PMD driver. It gets
configuration from IMP such as queue information, configures queue,
inits mac, inits manage table, disables gro etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Chunsong Feng <fengchunsong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com> Signed-off-by: Hao Chen <chenhao164@huawei.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Haiyue Wang [Tue, 24 Sep 2019 02:38:06 +0000 (10:38 +0800)]
net/ice: support protocol extraction per Rx queue
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for IPv6 traffic class (tc) field for switch rule.
Correct ice_ipv6_hdr based on the IPv6 Protocol using bitfields.
Add big/little endian convert for tc field before it is inserted,
since tc is only one byte and also does not have a byte-aligned
offset.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, IPv4 and UDP inner hash rule will be over
written by later rules after RSS initialization phase. This is
because the PTYPE bitmap table cover some PTYPEs belong to another
PTGs. And some PTYPEs are reserved. Remove these PTYPEs in TCP,
UDP, SCTP and ipv4 bitmap table.
Fixes: aa1cd410fa64 ("net/ice/base: add flow module") Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_cp_bitmap() already exists and should be used instead of
using ice_memcpy(). Note, there are a couple comments that suggest
using a bitmap-specific copy function, but those are not correct
since the source block of memory is not a bitmap.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove the error log message when attempting to download a
package that has an unsupported version.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: fix 4 bytes alignment for PPPoE dummy packet
Add two bytes to meet the requirement of 4 bytes alignment for dummy
packet for creating switch rule for PPPoE.
Fixes: d1c2f76b440a ("net/ice/base: support GTP and PPPoE protocols") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: search field vector indices for result slots
Previously, switch code would use only pre-reserved index
slots at the end of each field vector for recipe result index
locations. This patch adds code that detects other internal
empty index slots that could potentially be used. For each
recipe that is added, a determ ination is made as to whether
any of these additional index slots alige with all the profiles
selected for the recipe; if alignment is achieved, then these
result index slots can be used.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: fix segment in remove existing RSS rule
Before this patch, RSS tunneled rules can not be destroyed at runtime.
This is because it can not find the existing matching profile for tunnels.
segs[0] should always be zero and all matched, segs[1] for inner part.
It only construct one segment.
This patch modifies construct segment in ice_rem_rss_cfg_sync() to
match ice_add_rss_cfg_sync().
Fixes: b7d34ccc47b5 ("net/ice/base: packet encapsulation for RSS") Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, if set rule for IPv4 first and then set rule
for TCP with IPv4. The first rule for inner IP will be overwritten
by TCP rule. This is because MAC_IPV6_TUN_MAC_IPV4_PAY using the
same ptgs PTG_TUN_INNER_IPV4_OTHER with MAC_IPV4_TUN_MAC_IPV4_PAY,
this ptype should not in TCP bitmap.
Remove this bit in TCP bitmap.
Fixes: aa1cd410fa64 ("net/ice/base: add flow module") Cc: stable@dpdk.org Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add GTPU qfi field support for flow director. Note that for GTPU pkt,
only qfi field (6 bits) can be set for FD. The supported GTPU pkts are
defined as:
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_UDP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_TCP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_ICMP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_OTHER (FRAG and PAY belong to this)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: replace alloc-followed-by-copy with memdup
ice_memdup() is preferred over an alloc immediately followed by a copy.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add parameter "symm" to rss configuration APIs.
When symm is 1, Symmetric Teoplitz Hash can be enabled by
configuring GLQF_HSYMM properly.
NOTE:
Symmetric Teoplitz hash will work only if hash schema of
VSIQF_HASH_CTL be configured to 01b and it is assumed be enabled
in PMD.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Update FW API minor version to align to current value advertised
by FW in NVM images.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: support destination MAC field for FDIR
Add dest MAC address support so that this field can be matched when
we set Flow Director filter with dst addr for MAC.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable getting value from input to set up flow director counters,
so that the FDIR counters can count none, packets only, bytes only
or both packets and bytes as demanded.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add two ptypes(MAC_PPPOE_IPV4_SCTP and MAC_PPPOE_IPV6_SCTP) in
sctp ptype bitmap to enable rss.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Properly associate switch recipes to profiles. Previous code was
using the wrong bitfield for updating the associations, which was
causing other PFs to not properly identify and use existing
recipes. This sometimes resulted in rules not being added when it
should have been possible.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
When declaring the ice_prot_ext, and ice_prot_id_tbl structure,
we can use a fixed length array instead of a variable length one
which helps us catch future code changes that might desynchronize
the enum ice_protocol_type and the structs. This change also
necessitates removing the last member of the structs which was
just there to be a placeholder.
Also reorder the ice_prot_ext struct to match the ordering in the
associated enum ice_protocol_type.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: support switch rule about VLAN PPPoE
Add support for switch rule about single-VLAN-PPPoE. Note that double
VLAN is not supported by the hardware at this point, therefore only
single-VLAN support for PPPoE is added.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
The DPDK PF doesn't support SRIOV so remove the related iavf host
code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
The code in ice_sched_cleanup_all checks whether the port info is NULL
prior to calling ice_sched_clear_port.
More importantly, it also checks whether the port structure has been
initialized by checking its port_state field as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
There could be an error returned from ice_fill_adv_dummy_packet()
so we need to propagate that to the caller. Additionally, the
call to ice_flow_xtract_pkt_flags() could also return an error so
we need to propagate it as well.
Also add in the correct offsets for GENEVE and VXLAN_GPE to the
dummy packets.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: fix mask for checking protocol header
Before this patch, the logic of protocol header checking only support
non-tunneled packet. This patch remove the inner protocol in L3/L4 RSS
seg hdr mask and change the protocol header validation to reflect this.
So, for ice_add_rss_cfg(), the last parameter addl_hdrs could specify
the protocol header for tunnel.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: add non-word aligned IPv6 field support
Add non-word aligned field support for IPv6 with hlim, tc and proto.
All these fields are one byte within one word. In order to match
bytes within the IPv6 header for flow director we need to use a mask.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: add non-word aligned IPv4 field support
Add non-word aligned field support for ipv4 with ttl, tos and proto.
All these fields are one byte within one word. In order to match
bytes within the IPv4 header for flow director we need to use a mask.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Add VXLAN tunnel training packets to flow director and change the
interface to support tunnel packets.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:13 +0000 (13:56 +0100)]
examples/ipv4_multicast: check allmulticast enable status
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples/ipv4_multicast
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:12 +0000 (13:56 +0100)]
app/testpmd: check code of allmulticast mode switch
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/test-pmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Andrew Rybchenko [Tue, 24 Sep 2019 12:56:11 +0000 (13:56 +0100)]
ethdev: do nothing if all-multicast mode is applied again
Since driver callbacks return status code now, there is no necessity
to enable or disable all-multicast mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
all-multicast mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured all-multicast
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:10 +0000 (13:56 +0100)]
ethdev: change allmulticast callbacks to return status
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:09 +0000 (13:56 +0100)]
net/bonding: check code of allmulticast mode switch
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:08 +0000 (13:56 +0100)]
net/failsafe: check code of allmulticast mode switch
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep all-multicast mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Ivan Ilchenko [Tue, 24 Sep 2019 12:56:07 +0000 (13:56 +0100)]
ethdev: change allmulticast mode API to return errors
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Tue, 10 Sep 2019 09:02:16 +0000 (10:02 +0100)]
ethdev: change owner delete function to return int
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Tue, 10 Sep 2019 08:25:50 +0000 (09:25 +0100)]
examples: check status of getting link info
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Tue, 10 Sep 2019 08:25:47 +0000 (09:25 +0100)]
app: check status of getting link info
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Tue, 10 Sep 2019 08:25:45 +0000 (09:25 +0100)]
net/ixgbe: check status of getting link info
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Tue, 10 Sep 2019 08:25:44 +0000 (09:25 +0100)]
net/bonding: check status of getting link info
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Igor Romanov [Fri, 6 Sep 2019 14:34:54 +0000 (15:34 +0100)]
ethdev: make stats and xstats reset callbacks return int
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:33 +0000 (12:37 +0100)]
examples: take promiscuous mode switch result into account
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:26 +0000 (12:37 +0100)]
app: check code of promiscuous mode switch
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:27 +0000 (12:37 +0100)]
app/testpmd: check code of promiscuous mode switch
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:31 +0000 (12:37 +0100)]
kni: check code of promiscuous mode switch
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Andrew Rybchenko [Sat, 14 Sep 2019 11:37:25 +0000 (12:37 +0100)]
ethdev: do nothing if promiscuous mode is applied again
Since driver callbacks return status code now, there is no necessity
to enable or disable promiscuous mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
promiscuous mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured promiscuous
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:23 +0000 (12:37 +0100)]
net/bonding: check code of promiscuous mode switch
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:22 +0000 (12:37 +0100)]
net/failsafe: check code of promiscuous mode switch
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep promiscuous mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Ivan Ilchenko [Sat, 14 Sep 2019 11:37:21 +0000 (12:37 +0100)]
ethdev: change promiscuous mode controllers to return errors
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
git.droids-corp.org / dpdk.git / log