microb 2010

[aversive.git] / projects / microb2010 / bootloader / uart_config.h

diff --git a/projects/microb2010/bootloader/uart_config.h b/projects/microb2010/bootloader/uart_config.h
new file mode 100755 (executable)
index 0000000..506806b
--- /dev/null
+++ b/projects/microb2010/bootloader/uart_config.h
@@ -0,0 +1,120 @@
+/*  \r
+ *  Copyright Droids Corporation, Microb Technology, Eirbot (2005)\r
+ * \r
+ *  This program is free software; you can redistribute it and/or modify\r
+ *  it under the terms of the GNU General Public License as published by\r
+ *  the Free Software Foundation; either version 2 of the License, or\r
+ *  (at your option) any later version.\r
+ *\r
+ *  This program is distributed in the hope that it will be useful,\r
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\r
+ *  GNU General Public License for more details.\r
+ *\r
+ *  You should have received a copy of the GNU General Public License\r
+ *  along with this program; if not, write to the Free Software\r
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\r
+ *\r
+ *  Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:06 zer0 Exp $\r
+ *\r
+ */\r
+\r
+/* Droids-corp 2004 - Zer0\r
+ * config for uart module\r
+ */\r
+\r
+#ifndef UART_CONFIG_H\r
+#define UART_CONFIG_H\r
+\r
+#if UART_NUM == 0\r
+\r
+/* compile uart0 fonctions, undefine it to pass compilation */\r
+#define UART0_COMPILE  \r
+\r
+/* enable uart0 if == 1, disable if == 0 */\r
+#define UART0_ENABLED  1\r
+\r
+/* enable uart0 interrupts if == 1, disable if == 0 */\r
+#define UART0_INTERRUPT_ENABLED  1\r
+\r
+#define UART0_BAUDRATE 57600\r
+\r
+#define UART0_USE_DOUBLE_SPEED 0\r
+\r
+#define UART0_RX_FIFO_SIZE 64\r
+#define UART0_TX_FIFO_SIZE 16\r
+\r
+#define UART0_NBITS 8\r
+#define UART0_PARITY UART_PARTITY_NONE\r
+#define UART0_STOP_BIT UART_STOP_BITS_1\r
+\r
+#elif UART_NUM == 1\r
+\r
+/* compile uart1 fonctions, undefine it to pass compilation */\r
+#define UART1_COMPILE  \r
+\r
+/* enable uart1 if == 1, disable if == 0 */\r
+#define UART1_ENABLED  1\r
+\r
+/* enable uart1 interrupts if == 1, disable if == 0 */\r
+#define UART1_INTERRUPT_ENABLED  1\r
+\r
+#define UART1_BAUDRATE 57600\r
+\r
+#define UART1_USE_DOUBLE_SPEED 0\r
+\r
+#define UART1_RX_FIFO_SIZE 32\r
+#define UART1_TX_FIFO_SIZE 4\r
+\r
+#define UART1_NBITS 8\r
+#define UART1_PARITY UART_PARTITY_NONE\r
+#define UART1_STOP_BIT UART_STOP_BITS_1\r
+\r
+#elif UART_NUM == 2\r
+\r
+/* compile uart2 fonctions, undefine it to pass compilation */\r
+#define UART2_COMPILE  \r
+\r
+/* enable uart2 if == 1, disable if == 0 */\r
+#define UART2_ENABLED  1\r
+\r
+/* enable uart2 interrupts if == 1, disable if == 0 */\r
+#define UART2_INTERRUPT_ENABLED  1\r
+\r
+#define UART2_BAUDRATE 57600\r
+\r
+#define UART2_USE_DOUBLE_SPEED 0\r
+\r
+#define UART2_RX_FIFO_SIZE 32\r
+#define UART2_TX_FIFO_SIZE 4\r
+\r
+#define UART2_NBITS 8\r
+#define UART2_PARITY UART_PARTITY_NONE\r
+#define UART2_STOP_BIT UART_STOP_BITS_1\r
+\r
+#elif UART_NUM == 3\r
+\r
+/* compile uart3 fonctions, undefine it to pass compilation */\r
+#define UART3_COMPILE  \r
+\r
+/* enable uart3 if == 1, disable if == 0 */\r
+#define UART3_ENABLED  1\r
+\r
+/* enable uart3 interrupts if == 1, disable if == 0 */\r
+#define UART3_INTERRUPT_ENABLED  1\r
+\r
+#define UART3_BAUDRATE 57600\r
+\r
+#define UART3_USE_DOUBLE_SPEED 0\r
+\r
+#define UART3_RX_FIFO_SIZE 32\r
+#define UART3_TX_FIFO_SIZE 4\r
+\r
+#define UART3_NBITS 8\r
+#define UART3_PARITY UART_PARTITY_NONE\r
+#define UART3_STOP_BIT UART_STOP_BITS_1\r
+\r
+#endif /* uart num */\r
+\r
+#endif\r
+\r