-/* \r
- * Copyright Droids Corporation, Microb Technology, Eirbot (2005)\r
- * \r
- * This program is free software; you can redistribute it and/or modify\r
- * it under the terms of the GNU General Public License as published by\r
- * the Free Software Foundation; either version 2 of the License, or\r
- * (at your option) any later version.\r
- *\r
- * This program is distributed in the hope that it will be useful,\r
- * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
- * GNU General Public License for more details.\r
- *\r
- * You should have received a copy of the GNU General Public License\r
- * along with this program; if not, write to the Free Software\r
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\r
- *\r
- * Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:07 zer0 Exp $\r
- *\r
- */\r
-\r
-/* Droids-corp 2004 - Zer0\r
- * config for uart module\r
- */\r
-\r
-#ifndef UART_CONFIG_H\r
-#define UART_CONFIG_H\r
-\r
-/*\r
- * UART1 definitions \r
- */\r
-\r
-/* compile uart1 fonctions, undefine it to pass compilation */\r
-#define UART1_COMPILE \r
-\r
-/* enable uart1 if == 1, disable if == 0 */\r
-#define UART1_ENABLED 1\r
-\r
-/* enable uart1 interrupts if == 1, disable if == 0 */\r
-#define UART1_INTERRUPT_ENABLED 1\r
-\r
-#define UART1_BAUDRATE 57600\r
-\r
-/* \r
- * if you enable this, the maximum baudrate you can reach is \r
- * higher, but the precision is lower. \r
- */\r
-#define UART1_USE_DOUBLE_SPEED 1\r
-\r
-#define UART1_RX_FIFO_SIZE 64\r
-#define UART1_TX_FIFO_SIZE 64\r
-#define UART1_NBITS 8\r
-\r
-#define UART1_PARITY UART_PARTITY_NONE\r
-\r
-#define UART1_STOP_BIT UART_STOP_BITS_1\r
-\r
-\r
-/*\r
- * UART3 definitions \r
- */\r
-\r
-/* compile uart3 fonctions, undefine it to pass compilation */\r
-#define UART3_COMPILE \r
-\r
-/* enable uart3 if == 1, disable if == 0 */\r
-#define UART3_ENABLED 1\r
-\r
-/* enable uart3 interrupts if == 1, disable if == 0 */\r
-#define UART3_INTERRUPT_ENABLED 1\r
-\r
-#define UART3_BAUDRATE 57600\r
-\r
-/* \r
- * if you enable this, the maximum baudrate you can reach is \r
- * higher, but the precision is lower. \r
- */\r
-#define UART3_USE_DOUBLE_SPEED 1\r
-//#define UART3_USE_DOUBLE_SPEED 1\r
-\r
-#define UART3_RX_FIFO_SIZE 64\r
-#define UART3_TX_FIFO_SIZE 64\r
-//#define UART3_NBITS 5\r
-//#define UART3_NBITS 6\r
-//#define UART3_NBITS 7\r
-#define UART3_NBITS 8\r
-//#define UART3_NBITS 9\r
-\r
-#define UART3_PARITY UART_PARTITY_NONE\r
-//#define UART3_PARITY UART_PARTITY_ODD\r
-//#define UART3_PARITY UART_PARTITY_EVEN\r
-\r
-#define UART3_STOP_BIT UART_STOP_BITS_1\r
-//#define UART3_STOP_BIT UART_STOP_BITS_2\r
-\r
-\r
-\r
-\r
-/* .... same for uart 1, 2, 3 ... */\r
-\r
-#endif\r
-\r