ethdev: remove Rx interrupt switch

[dpdk.git] / drivers / net / e1000 / igb_ethdev.c

diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index c7e6d55..848ef6e 100644 (file)
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -106,9 +106,7 @@ static int  eth_igb_flow_ctrl_get(struct rte_eth_dev *dev,
 static int  eth_igb_flow_ctrl_set(struct rte_eth_dev *dev,
                                struct rte_eth_fc_conf *fc_conf);
 static int eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev);
-#ifdef RTE_NEXT_ABI
 static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev);
-#endif
 static int eth_igb_interrupt_get_status(struct rte_eth_dev *dev);
 static int eth_igb_interrupt_action(struct rte_eth_dev *dev);
 static void eth_igb_interrupt_handler(struct rte_intr_handle *handle,
@@ -232,7 +230,6 @@ static int igb_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
                                          uint32_t flags);
 static int igb_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
                                          struct timespec *timestamp);
-#ifdef RTE_NEXT_ABI
 static int eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev,
                                        uint16_t queue_id);
 static int eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev,
@@ -241,7 +238,6 @@ static void eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
                                       uint8_t queue, uint8_t msix_vector);
 static void eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix_vector,
                               uint8_t index, uint8_t offset);
-#endif
 static void eth_igb_configure_msix_intr(struct rte_eth_dev *dev);
 
 /*
@@ -303,10 +299,8 @@ static const struct eth_dev_ops eth_igb_ops = {
        .vlan_tpid_set        = eth_igb_vlan_tpid_set,
        .vlan_offload_set     = eth_igb_vlan_offload_set,
        .rx_queue_setup       = eth_igb_rx_queue_setup,
-#ifdef RTE_NEXT_ABI
        .rx_queue_intr_enable = eth_igb_rx_queue_intr_enable,
        .rx_queue_intr_disable = eth_igb_rx_queue_intr_disable,
-#endif
        .rx_queue_release     = eth_igb_rx_queue_release,
        .rx_queue_count       = eth_igb_rx_queue_count,
        .rx_descriptor_done   = eth_igb_rx_descriptor_done,
@@ -893,9 +887,7 @@ eth_igb_start(struct rte_eth_dev *dev)
                E1000_DEV_PRIVATE(dev->data->dev_private);
        struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
        int ret, mask;
-#ifdef RTE_NEXT_ABI
        uint32_t intr_vector = 0;
-#endif
        uint32_t ctrl_ext;
 
        PMD_INIT_FUNC_TRACE();
@@ -936,7 +928,6 @@ eth_igb_start(struct rte_eth_dev *dev)
        /* configure PF module if SRIOV enabled */
        igb_pf_host_configure(dev);
 
-#ifdef RTE_NEXT_ABI
        /* check and configure queue intr-vector mapping */
        if (dev->data->dev_conf.intr_conf.rxq != 0)
                intr_vector = dev->data->nb_rx_queues;
@@ -954,7 +945,6 @@ eth_igb_start(struct rte_eth_dev *dev)
                        return -ENOMEM;
                }
        }
-#endif
 
        /* confiugre msix for rx interrupt */
        eth_igb_configure_msix_intr(dev);
@@ -1050,11 +1040,9 @@ eth_igb_start(struct rte_eth_dev *dev)
                                     " no intr multiplex\n");
        }
 
-#ifdef RTE_NEXT_ABI
        /* check if rxq interrupt is enabled */
        if (dev->data->dev_conf.intr_conf.rxq != 0)
                eth_igb_rxq_interrupt_setup(dev);
-#endif
 
        /* enable uio/vfio intr/eventfd mapping */
        rte_intr_enable(intr_handle);
@@ -1146,14 +1134,12 @@ eth_igb_stop(struct rte_eth_dev *dev)
        }
        filter_info->twotuple_mask = 0;
 
-#ifdef RTE_NEXT_ABI
        /* Clean datapath event and queue/vec mapping */
        rte_intr_efd_disable(intr_handle);
        if (intr_handle->intr_vec != NULL) {
                rte_free(intr_handle->intr_vec);
                intr_handle->intr_vec = NULL;
        }
-#endif
 }
 
 static void
@@ -1163,9 +1149,7 @@ eth_igb_close(struct rte_eth_dev *dev)
        struct e1000_adapter *adapter =
                E1000_DEV_PRIVATE(dev->data->dev_private);
        struct rte_eth_link link;
-#ifdef RTE_NEXT_ABI
        struct rte_pci_device *pci_dev;
-#endif
 
        eth_igb_stop(dev);
        adapter->stopped = 1;
@@ -1185,13 +1169,11 @@ eth_igb_close(struct rte_eth_dev *dev)
 
        igb_dev_free_queues(dev);
 
-#ifdef RTE_NEXT_ABI
        pci_dev = dev->pci_dev;
        if (pci_dev->intr_handle.intr_vec) {
                rte_free(pci_dev->intr_handle.intr_vec);
                pci_dev->intr_handle.intr_vec = NULL;
        }
-#endif
 
        memset(&link, 0, sizeof(link));
        rte_igb_dev_atomic_write_link_status(dev, &link);
@@ -2017,7 +1999,6 @@ eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev)
        return 0;
 }
 
-#ifdef RTE_NEXT_ABI
 /* It clears the interrupt causes and enables the interrupt.
  * It will be called once only during nic initialized.
  *
@@ -2044,7 +2025,6 @@ static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev)
 
        return 0;
 }
-#endif
 
 /*
  * It reads ICR and gets interrupt causes, check it and set a bit flag
@@ -4144,7 +4124,6 @@ static struct rte_driver pmd_igbvf_drv = {
        .init = rte_igbvf_pmd_init,
 };
 
-#ifdef RTE_NEXT_ABI
 static int
 eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
 {
@@ -4219,7 +4198,6 @@ eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
                                           8 * direction);
        }
 }
-#endif
 
 /* Sets up the hardware to generate MSI-X interrupts properly
  * @hw
@@ -4228,13 +4206,11 @@ eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
 static void
 eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
 {
-#ifdef RTE_NEXT_ABI
        int queue_id;
        uint32_t tmpval, regval, intr_mask;
        struct e1000_hw *hw =
                E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
        uint32_t vec = 0;
-#endif
        struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
 
        /* won't configure msix register if no mapping is done
@@ -4243,7 +4219,6 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
        if (!rte_intr_dp_is_en(intr_handle))
                return;
 
-#ifdef RTE_NEXT_ABI
        /* set interrupt vector for other causes */
        if (hw->mac.type == e1000_82575) {
                tmpval = E1000_READ_REG(hw, E1000_CTRL_EXT);
@@ -4299,7 +4274,6 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
        }
 
        E1000_WRITE_FLUSH(hw);
-#endif
 }
 
 PMD_REGISTER_DRIVER(pmd_igb_drv);