#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
-#include <rte_debug.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
-#include <rte_ring.h>
#include <rte_debug.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
#define PARAM_PROC_ID "proc-id"
#define PARAM_NUM_PROCS "num-procs"
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-/* Default configuration for rx and tx thresholds etc. */
-static const struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = 8,
- .hthresh = 8,
- .wthresh = 4,
- },
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static const struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = 36,
- .hthresh = 0,
- .wthresh = 0,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
/* for each lcore, record the elements of the ports array to use */
struct lcore_ports{
unsigned start_port;
unsigned rx;
unsigned tx;
unsigned drop;
-} __attribute__((aligned(CACHE_LINE_SIZE / 2)));
+} __attribute__((aligned(RTE_CACHE_LINE_SIZE / 2)));
static int proc_id = -1;
static unsigned num_procs = 0;
-static uint8_t ports[RTE_MAX_ETHPORTS];
+static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports = 0;
static struct lcore_ports lcore_ports[RTE_MAX_LCORE];
ports[num_ports++] = (uint8_t)i;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
- return (ret);
+ return ret;
}
/*
* coming from the mbuf_pool passed as parameter
*/
static inline int
-smp_port_init(uint8_t port, struct rte_mempool *mbuf_pool, uint16_t num_queues)
+smp_port_init(uint16_t port, struct rte_mempool *mbuf_pool,
+ uint16_t num_queues)
{
struct rte_eth_conf port_conf = {
.rxmode = {
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
}
};
const uint16_t rx_rings = num_queues, tx_rings = num_queues;
+ struct rte_eth_dev_info info;
int retval;
uint16_t q;
+ uint16_t nb_rxd = RX_RING_SIZE;
+ uint16_t nb_txd = TX_RING_SIZE;
if (rte_eal_process_type() == RTE_PROC_SECONDARY)
return 0;
if (port >= rte_eth_dev_count())
return -1;
- printf("# Initialising port %u... ", (unsigned)port);
+ printf("# Initialising port %u... ", port);
fflush(stdout);
+ rte_eth_dev_info_get(port, &info);
+ info.default_rxconf.rx_drop_en = 1;
+
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval < 0)
return retval;
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
+ if (retval < 0)
+ return retval;
+
for (q = 0; q < rx_rings; q ++) {
- retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
- rte_eth_dev_socket_id(port), &rx_conf_default,
+ retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
+ rte_eth_dev_socket_id(port),
+ &info.default_rxconf,
mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
- rte_eth_dev_socket_id(port), &tx_conf_default);
+ retval = rte_eth_tx_queue_setup(port, q, nb_txd,
+ rte_eth_dev_socket_id(port),
+ NULL);
if (retval < 0)
return retval;
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
proc_type = rte_eal_process_type();
mp = (proc_type == RTE_PROC_SECONDARY) ?
rte_mempool_lookup(_SMP_MBUF_POOL) :
- rte_mempool_create(_SMP_MBUF_POOL, NB_MBUFS, MBUF_SIZE,
- MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
if (mp == NULL)
rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");
git.droids-corp.org / dpdk.git / blobdiff