#include <rte_pci.h>
#include <rte_dev.h>
#include <rte_devargs.h>
+#include <rte_errno.h>
#include "rte_ether.h"
#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
uint16_t nb_max; /**< Max allowed number of descriptors. */
uint16_t nb_min; /**< Min allowed number of descriptors. */
uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+
+ /**
+ * Max allowed number of segments per whole packet.
+ *
+ * - For TSO packet this is the total number of data descriptors allowed
+ * by device.
+ *
+ * @see nb_mtu_seg_max
+ */
+ uint16_t nb_seg_max;
+
+ /**
+ * Max number of segments per one MTU.
+ *
+ * - For non-TSO packet, this is the maximum allowed number of segments
+ * in a single transmit packet.
+ *
+ * - For TSO packet each segment within the TSO may span up to this
+ * value.
+ *
+ * @see nb_seg_max
+ */
+ uint16_t nb_mtu_seg_max;
};
/**
uint16_t nb_pkts);
/**< @internal Send output packets on a transmit queue of an Ethernet device. */
+typedef uint16_t (*eth_tx_prep_t)(void *txq,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Prepare output packets on a transmit queue of an Ethernet device. */
+
typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
/**< @internal Get current flow control parameter on an Ethernet device */
struct rte_eth_dev {
eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
+ eth_tx_prep_t tx_pkt_prepare; /**< Pointer to PMD transmit prepare function. */
struct rte_eth_dev_data *data; /**< Pointer to device data */
const struct eth_driver *driver;/**< Driver for this device */
const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
}
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Process a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_prepare() function is invoked to prepare output packets to be
+ * transmitted on the output queue *queue_id* of the Ethernet device designated
+ * by its *port_id*.
+ * The *nb_pkts* parameter is the number of packets to be prepared which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them
+ * allocated from a pool created with rte_pktmbuf_pool_create().
+ * For each packet to send, the rte_eth_tx_prepare() function performs
+ * the following operations:
+ *
+ * - Check if packet meets devices requirements for tx offloads.
+ *
+ * - Check limitations about number of segments.
+ *
+ * - Check additional requirements when debug is enabled.
+ *
+ * - Update and/or reset required checksums when tx offload is set for packet.
+ *
+ * Since this function can modify packet data, provided mbufs must be safely
+ * writable (e.g. modified data cannot be in shared segment).
+ *
+ * The rte_eth_tx_prepare() function returns the number of packets ready to be
+ * sent. A return value equal to *nb_pkts* means that all packets are valid and
+ * ready to be sent, otherwise stops processing on the first invalid packet and
+ * leaves the rest packets untouched.
+ *
+ * When this functionality is not implemented in the driver, all packets are
+ * are returned untouched.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * The value must be a valid port id.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to process.
+ * @return
+ * The number of packets correct and ready to be sent. The return value can be
+ * less than the value of the *tx_pkts* parameter when some packet doesn't
+ * meet devices requirements with rte_errno set appropriately:
+ * - -EINVAL: offload flags are not correctly set
+ * - -ENOTSUP: the offload feature is not supported by the hardware
+ *
+ */
+
+#ifndef RTE_ETHDEV_TX_PREPARE_NOOP
+
+static inline uint16_t
+rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_PMD_DEBUG_TRACE("Invalid TX port_id=%d\n", port_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+ rte_errno = -EINVAL;
+ return 0;
+ }
+#endif
+
+ if (!dev->tx_pkt_prepare)
+ return nb_pkts;
+
+ return (*dev->tx_pkt_prepare)(dev->data->tx_queues[queue_id],
+ tx_pkts, nb_pkts);
+}
+
+#else
+
+/*
+ * Native NOOP operation for compilation targets which doesn't require any
+ * preparations steps, and functional NOOP may introduce unnecessary performance
+ * drop.
+ *
+ * Generally this is not a good idea to turn it on globally and didn't should
+ * be used if behavior of tx_preparation can change.
+ */
+
+static inline uint16_t
+rte_eth_tx_prepare(__rte_unused uint8_t port_id, __rte_unused uint16_t queue_id,
+ __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ return nb_pkts;
+}
+
+#endif
+
typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
void *userdata);
git.droids-corp.org / dpdk.git / blobdiff