uint8_t en);
/**< @internal enable/disable the l2 tunnel offload functions */
-#ifdef RTE_NIC_BYPASS
-
-enum {
- RTE_BYPASS_MODE_NONE,
- RTE_BYPASS_MODE_NORMAL,
- RTE_BYPASS_MODE_BYPASS,
- RTE_BYPASS_MODE_ISOLATE,
- RTE_BYPASS_MODE_NUM,
-};
-
-#define RTE_BYPASS_MODE_VALID(x) \
- ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
- RTE_BYPASS_EVENT_NONE,
- RTE_BYPASS_EVENT_START,
- RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
- RTE_BYPASS_EVENT_POWER_ON,
- RTE_BYPASS_EVENT_OS_OFF,
- RTE_BYPASS_EVENT_POWER_OFF,
- RTE_BYPASS_EVENT_TIMEOUT,
- RTE_BYPASS_EVENT_NUM
-};
-
-#define RTE_BYPASS_EVENT_VALID(x) \
- ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
- RTE_BYPASS_TMT_OFF, /* timeout disabled. */
- RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
- RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
- RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
- RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
- RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
- RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
- RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
- RTE_BYPASS_TMT_NUM
-};
-
-#define RTE_BYPASS_TMT_VALID(x) \
- ((x) == RTE_BYPASS_TMT_OFF || \
- ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
-
-typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
-typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
-typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
-typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
-typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
-typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
-typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
-typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
-typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
-#endif
typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */
eth_set_eeprom_t set_eeprom; /**< Set eeprom. */
- /* bypass control */
-#ifdef RTE_NIC_BYPASS
- bypass_init_t bypass_init;
- bypass_state_set_t bypass_state_set;
- bypass_state_show_t bypass_state_show;
- bypass_event_set_t bypass_event_set;
- bypass_event_show_t bypass_event_show;
- bypass_wd_timeout_set_t bypass_wd_timeout_set;
- bypass_wd_timeout_show_t bypass_wd_timeout_show;
- bypass_ver_show_t bypass_ver_show;
- bypass_wd_reset_t bypass_wd_reset;
-#endif
eth_filter_ctrl_t filter_ctrl; /**< common filter control. */
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
-/**
- * Initialize bypass logic. This function needs to be called before
- * executing any other bypass API.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_init(uint8_t port);
-
-/**
- * Return bypass state.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param state
- * The return bypass state.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
-
-/**
- * Set bypass state
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param new_state
- * The current bypass state.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
-
-/**
- * Return bypass state when given event occurs.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param event
- * The bypass event
- * - (1) Main power on (power button is pushed)
- * - (2) Auxiliary power on (power supply is being plugged)
- * - (3) Main power off (system shutdown and power supply is left plugged in)
- * - (4) Auxiliary power off (power supply is being unplugged)
- * - (5) Display or set the watchdog timer
- * @param state
- * The bypass state when given event occurred.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
-
-/**
- * Set bypass state when given event occurs.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param event
- * The bypass event
- * - (1) Main power on (power button is pushed)
- * - (2) Auxiliary power on (power supply is being plugged)
- * - (3) Main power off (system shutdown and power supply is left plugged in)
- * - (4) Auxiliary power off (power supply is being unplugged)
- * - (5) Display or set the watchdog timer
- * @param state
- * The assigned state when given event occurs.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
-
-/**
- * Set bypass watchdog timeout count.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param timeout
- * The timeout to be set.
- * - (0) 0 seconds (timer is off)
- * - (1) 1.5 seconds
- * - (2) 2 seconds
- * - (3) 3 seconds
- * - (4) 4 seconds
- * - (5) 8 seconds
- * - (6) 16 seconds
- * - (7) 32 seconds
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
-
-/**
- * Get bypass firmware version.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param ver
- * The firmware version
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
-
-/**
- * Return bypass watchdog timeout in seconds
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param wd_timeout
- * The return watchdog timeout. "0" represents timer expired
- * - (0) 0 seconds (timer is off)
- * - (1) 1.5 seconds
- * - (2) 2 seconds
- * - (3) 3 seconds
- * - (4) 4 seconds
- * - (5) 8 seconds
- * - (6) 16 seconds
- * - (7) 32 seconds
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
-
-/**
- * Reset bypass watchdog timer
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_reset(uint8_t port);
-
/**
* Configuration of Receive Side Scaling hash computation of Ethernet device.
*
git.droids-corp.org / dpdk.git / blobdiff