uint8_t on);
/**< @internal Set all Unicast Hash bitmap */
-typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t rx_mode,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Enable or disable a VF transmit */
-
-typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
- uint16_t vlan,
- uint64_t vf_mask,
- uint8_t vlan_on);
-/**< @internal Set VF VLAN pool filter */
-
typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
uint16_t queue_idx,
uint16_t tx_rate);
/**< @internal Set queue TX rate */
-typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t tx_rate,
- uint64_t q_msk);
-/**< @internal Set VF TX rate */
-
typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */
eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */
- eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */
- eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */
- eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */
- eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */
- eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */
-
eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */
eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */
eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
*/
int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
- /**
- * Set RX L2 Filtering mode of a VF of an Ethernet device.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param rx_mode
- * The RX mode mask, which is one or more of accepting Untagged Packets,
- * packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
- * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
- * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
- * in rx_mode.
- * @param on
- * 1 - Enable a VF RX mode.
- * 0 - Disable a VF RX mode.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
- uint8_t on);
-
-/**
-* Enable or disable a VF traffic transmit of the Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic transmit.
-* 0 - Disable a VF traffic transmit.
-* @return
-* - (0) if successful.
-* - (-ENODEV) if *port_id* invalid.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable or disable a VF traffic receive of an Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic receive.
-* 0 - Disable a VF traffic receive.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
-* received VLAN packets tagged with a given VLAN Tag Identifier.
-*
-* @param port id
-* The port identifier of the Ethernet device.
-* @param vlan_id
-* The VLAN Tag Identifier whose filtering must be enabled or disabled.
-* @param vf_mask
-* Bitmap listing which VFs participate in the VLAN filtering.
-* @param vlan_on
-* 1 - Enable VFs VLAN filtering.
-* 0 - Disable VFs VLAN filtering.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
- uint64_t vf_mask,
- uint8_t vlan_on);
-
/**
* Set a traffic mirroring rule on an Ethernet device
*
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
-/**
- * Set the rate limitation for a vf on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param tx_rate
- * The tx rate allocated from the total link speed for this VF id.
- * @param q_msk
- * The queue mask which need to set the rate.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support this feature.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
- uint16_t tx_rate, uint64_t q_msk);
-
/**
* Initialize bypass logic. This function needs to be called before
* executing any other bypass API.
git.droids-corp.org / dpdk.git / blobdiff