* Keep these flags synchronized with rte_get_rx_ol_flag_name() and
* rte_get_tx_ol_flag_name().
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */
+
+/**
+ * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
+ * the packet is recognized as a VLAN, but the behavior between PMDs
+ * was not the same. This flag is kept for some time to avoid breaking
+ * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ */
+#define PKT_RX_VLAN_PKT (1ULL << 0)
+
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */
#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */
#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */
+
+/**
+ * A vlan has been stripped by the hardware and its tci is saved in
+ * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
+ * in the RX configuration of the PMD.
+ */
+#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
+
+/* hole, some bits can be reused here */
+
#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */
#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
-#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */
+
+/**
+ * The 2 vlans have been stripped by the hardware and their tci are
+ * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * This can only happen if vlan stripping is enabled in the RX
+ * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
+ * must also be set.
+ */
+#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
+
+/**
+ * Deprecated.
+ * RX packet with double VLAN stripped.
+ * This flag is replaced by PKT_RX_QINQ_STRIPPED.
+ */
+#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
+
/* add new RX flags here */
/* add new TX flags here */
/*
* The packet type, which is the combination of outer/inner L2, L3, L4
- * and tunnel types.
+ * and tunnel types. The packet_type is about data really present in the
+ * mbuf. Example: if vlan stripping is enabled, a received vlan packet
+ * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
+ * vlan is stripped from the data.
*/
union {
uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
uint32_t pkt_len; /**< Total pkt len: sum of all segments. */
uint16_t data_len; /**< Amount of data in segment buffer. */
- uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */
+ /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
+ uint16_t vlan_tci;
union {
uint32_t rss; /**< RSS hash result if RSS enabled */
uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
- uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */
+ /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
+ uint16_t vlan_tci_outer;
/* second cache line - fields only used in slow path or on TX */
MARKER cacheline1 __rte_cache_min_aligned;