+++ /dev/null
-/*
- * Copyright Droids Corporation, Microb Technology, Eirbot (2005)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Revision : $Id: diagnostic.h,v 1.6.4.2 2008-05-09 08:23:52 zer0 Exp $
- *
- */
-
-#include <diagnostic_config.h>
-
-
-
-/** shows the interrupt cycles on an oscilloscope or a multimeter you
- * can then measure the interrupt busy time of your device. this
- * function is an infinite loop which has to be the main program, and
- * will be interrupted. a port bit is needed as diagnostic interface
- * with scope or multimeter. if you use a scope : freezing of the
- * oscillation shows interrupt if you use a multimeter : voltage is
- * proportionnal to idle time
- * 0V >> 0% idle (always busy)
- * Vcc/2 >> 100% idle (not interupted)
- * be careful, you perhaps need a low pass filter for your voltmeter */
-extern void show_int_loop(void);
-
-/** This functuion allows to monitor the maximal stack space that was
- * used since the last reset (peak value) you can then monitor the
- * available space in your ram returns the minimal value of the free
- * space left */
-extern uint16_t min_stack_space_available(void);
-