update debug board... but what ?

[protos/xbee-elec.git] / fpv_debugboard / fpv_debugboard.s#2

diff --git a/fpv_debugboard/fpv_debugboard.s#2 b/fpv_debugboard/fpv_debugboard.s#2
index cc42a5f..8610ac4 100644 (file)
--- a/fpv_debugboard/fpv_debugboard.s#2
+++ b/fpv_debugboard/fpv_debugboard.s#2
@@ -4427,8 +4427,8 @@ for VCCIO. So use a manual switch.</text>
 <instance part="U$4" gate="G$1" x="83.82" y="236.22"/>
 <instance part="P+2" gate="G$1" x="101.6" y="228.6"/>
 <instance part="GND10" gate="1" x="226.06" y="198.12"/>
-<instance part="LED5" gate="G$1" x="264.16" y="175.26"/>
-<instance part="R14" gate="G$1" x="264.16" y="160.02" rot="R90"/>
+<instance part="LED5" gate="G$1" x="264.16" y="160.02"/>
+<instance part="R14" gate="G$1" x="264.16" y="172.72" rot="MR90"/>
 <instance part="GND11" gate="1" x="264.16" y="149.86"/>
 <instance part="R15" gate="G$1" x="33.02" y="119.38"/>
 </instances>
@@ -4549,7 +4549,7 @@ for VCCIO. So use a manual switch.</text>
 <pinref part="GND10" gate="1" pin="GND"/>
 </segment>
 <segment>
-<pinref part="R14" gate="G$1" pin="1"/>
+<pinref part="LED5" gate="G$1" pin="C"/>
 <pinref part="GND11" gate="1" pin="GND"/>
 <wire x1="264.16" y1="154.94" x2="264.16" y2="152.4" width="0.1524" layer="91"/>
 </segment>
@@ -4882,10 +4882,10 @@ for VCCIO. So use a manual switch.</text>
 <wire x1="264.16" y1="182.88" x2="261.62" y2="182.88" width="0.1524" layer="91"/>
 <pinref part="U$3" gate="G$1" pin="5V"/>
 <wire x1="264.16" y1="185.42" x2="264.16" y2="187.96" width="0.1524" layer="91"/>
-<pinref part="LED5" gate="G$1" pin="A"/>
+<junction x="264.16" y="185.42"/>
+<pinref part="R14" gate="G$1" pin="2"/>
 <wire x1="264.16" y1="182.88" x2="264.16" y2="177.8" width="0.1524" layer="91"/>
 <junction x="264.16" y="182.88"/>
-<junction x="264.16" y="185.42"/>
 </segment>
 <segment>
 <pinref part="JP6" gate="G$1" pin="3"/>
@@ -4924,13 +4924,6 @@ for VCCIO. So use a manual switch.</text>
 <label x="177.8" y="198.12" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="N$18" class="0">
-<segment>
-<pinref part="LED5" gate="G$1" pin="C"/>
-<pinref part="R14" gate="G$1" pin="2"/>
-<wire x1="264.16" y1="170.18" x2="264.16" y2="165.1" width="0.1524" layer="91"/>
-</segment>
-</net>
 <net name="N$6" class="0">
 <segment>
 <pinref part="R6" gate="G$1" pin="2"/>
@@ -4966,6 +4959,13 @@ for VCCIO. So use a manual switch.</text>
 <wire x1="38.1" y1="119.38" x2="53.34" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 </net>
+<net name="N$18" class="0">
+<segment>
+<pinref part="R14" gate="G$1" pin="1"/>
+<pinref part="LED5" gate="G$1" pin="A"/>
+<wire x1="264.16" y1="167.64" x2="264.16" y2="162.56" width="0.1524" layer="91"/>
+</segment>
+</net>
 </nets>
 </sheet>
 </sheets>