dpdk.git
5 years agomempool/octeontx2: fix pool populating
Vamsi Attunuru [Mon, 8 Jul 2019 04:47:31 +0000 (10:17 +0530)]
mempool/octeontx2: fix pool populating

Fix npa pool range errors observed while creating mempool, this issue
happens when mempool objects are from different mem segments.

During mempool creation, octeontx2 mempool driver populates pool range
fields before enqueuing the buffers. If any enqueue or dequeue operation
reaches npa hardware prior to the range field's HW context update,
those ops result in npa range errors. Patch adds a routine to read back
HW context and verify if range fields are updated or not.

Fixes: e5271c507aeb ("mempool/octeontx2: add remaining slow path ops")

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agoexamples/ip_reassembly: enable IP checksum offload
Sunil Kumar Kori [Mon, 8 Jul 2019 04:33:00 +0000 (10:03 +0530)]
examples/ip_reassembly: enable IP checksum offload

As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoexamples/ip_fragmentation: enable IP checksum offload
Sunil Kumar Kori [Mon, 8 Jul 2019 04:32:59 +0000 (10:02 +0530)]
examples/ip_fragmentation: enable IP checksum offload

As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoip_frag: remove IP checkum offload flag
Sunil Kumar Kori [Mon, 8 Jul 2019 04:32:58 +0000 (10:02 +0530)]
ip_frag: remove IP checkum offload flag

Currently PKT_TX_IP_CKSUM is being set into mbuf->ol_flags
during fragmentation and reassemble operation implicitly.
Because of this, application is forced to use checksum offload
whether it is supported by platform or not.

Also documentation does not provide any expected value of ol_flags
in returned mbuf (reassembled or fragmented) so application will never
come to know that which offloads are enabled. So transmission may be failed
for the platforms which does not support checksum offload.

Also, IPv6 does not contain any checksum field in header so setting
mbuf->ol_flags with PKT_TX_IP_CKSUM is itself invalid.

So removing mentioned flag from the library.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoeal: fix typo in comments
Krzysztof Kanas [Tue, 4 Jun 2019 09:21:26 +0000 (11:21 +0200)]
eal: fix typo in comments

Fixes: a753e53d517b ("eal: add device event monitor framework")
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
5 years agotest/mcslock: add MCS queued lock unit test
Phil Yang [Fri, 5 Jul 2019 10:27:08 +0000 (18:27 +0800)]
test/mcslock: add MCS queued lock unit test

Unit test and perf test for MCS queued lock.

Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
5 years agomcslock: add MCS queued lock implementation
Phil Yang [Fri, 5 Jul 2019 10:27:06 +0000 (18:27 +0800)]
mcslock: add MCS queued lock implementation

If there are multiple threads contending, they all attempt to take the
spinlock lock at the same time once it is released. This results in a
huge amount of processor bus traffic, which is a huge performance
killer. Thus, if we somehow order the lock-takers so that they know who
is next in line for the resource we can vastly reduce the amount of bus
traffic.

This patch added MCS lock library. It provides scalability by spinning
on a CPU/thread local variable which avoids expensive cache bouncings.
It provides fairness by maintaining a list of acquirers and passing the
lock to each CPU/thread in the order they acquired the lock.

Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
5 years agovfio: retry creating sPAPR DMA window
Takeshi Yoshimura [Fri, 7 Jun 2019 02:28:29 +0000 (11:28 +0900)]
vfio: retry creating sPAPR DMA window

sPAPR allows only page_shift from VFIO_IOMMU_SPAPR_TCE_GET_INFO ioctl.
However, Linux 4.17 or before returns incorrect page_shift for Power9.
I added the code for retrying creation of sPAPR DMA window.

Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
5 years agonet/dpaa: support interface init for multi-process
Akhil Goyal [Tue, 25 Jun 2019 10:40:19 +0000 (16:10 +0530)]
net/dpaa: support interface init for multi-process

The existing code is enabling the Tx queues as per
the number of lcore count, which is causing issue
in case of secondary process running on different number
of cores.
This patch fixes the Tx queues to number of DPAA cores,
which helps in using fixed number of Tx queues across
processes access.

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
5 years agobus/dpaa: update mempool for secondary process
Hemant Agrawal [Tue, 25 Jun 2019 10:40:18 +0000 (16:10 +0530)]
bus/dpaa: update mempool for secondary process

1. need to use the bpool with rte_malloc instead of rte_free
2. Option to give portal to the secondary process thread.

Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agobus/dpaa: support hotplug ops
Shreyansh Jain [Tue, 25 Jun 2019 10:40:17 +0000 (16:10 +0530)]
bus/dpaa: support hotplug ops

Parse and find_device have specific function - former is for parsing a
string passed as argument, whereas the later is for iterating over all
the devices in the bus and calling a callback/handler. They have been
corrected with their right operations to support hotplugging/devargs
plug/unplug calls.

Support for plug/unplug too has been added.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
5 years agoexamples/ipsec-secgw: support header reconstruction
Fan Zhang [Thu, 4 Jul 2019 10:42:36 +0000 (11:42 +0100)]
examples/ipsec-secgw: support header reconstruction

This patch updates the ipsec-secgw application to support
header reconstruction. In addition a series of tests have
been added to prove the implementation's correctness.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoipsec: support header construction
Fan Zhang [Thu, 4 Jul 2019 10:42:35 +0000 (11:42 +0100)]
ipsec: support header construction

Add support for RFC 4301(5.1.2) to update of
Type of service field and Traffic class field
bits inside ipv4/ipv6 packets for outbound cases
and inbound cases which deals with the update of
the DSCP/ENC bits inside each of the fields.

Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoapp/bbdev: add test vectors for 5GNR
Nicolas Chautru [Wed, 3 Jul 2019 15:24:10 +0000 (08:24 -0700)]
app/bbdev: add test vectors for 5GNR

Adding LDPC vectors for UT verification, coverage,
and profiling for 5GNR encode/decode operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agoapp/bbdev: update for 5GNR
Nicolas Chautru [Wed, 3 Jul 2019 15:24:09 +0000 (08:24 -0700)]
app/bbdev: update for 5GNR

Extending test framework for FEC 5GNR operations
for UT verification and profiling.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agodoc: update turbo_sw build steps in bbdev guide
Nicolas Chautru [Wed, 3 Jul 2019 15:24:08 +0000 (08:24 -0700)]
doc: update turbo_sw build steps in bbdev guide

This now includes steps to build with either
libraries for AVX2, or AVX512 or no dependency.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agobaseband/turbo_sw: extend for 5G
Nicolas Chautru [Wed, 3 Jul 2019 15:24:07 +0000 (08:24 -0700)]
baseband/turbo_sw: extend for 5G

Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agodoc: update bbdev guide for 5GNR operations
Nicolas Chautru [Wed, 3 Jul 2019 15:24:06 +0000 (08:24 -0700)]
doc: update bbdev guide for 5GNR operations

The documentation captures the related change in
BBDEV API to support 5GNR encode/decode operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agobbdev: extend API for 5G FEC
Nicolas Chautru [Wed, 3 Jul 2019 15:24:05 +0000 (08:24 -0700)]
bbdev: extend API for 5G FEC

Extension to BBDEV operations to support 5G
on top of existing 4G operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agobbdev: rename non-generic LTE specific structure
Nicolas Chautru [Wed, 3 Jul 2019 15:24:04 +0000 (08:24 -0700)]
bbdev: rename non-generic LTE specific structure

Renaming of the enums and structure which were LTE specific to
allow for extension and support for 5GNR operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
5 years agotest/crypto: return correct value if feature not supported
Damian Nowak [Wed, 3 Jul 2019 11:15:58 +0000 (13:15 +0200)]
test/crypto: return correct value if feature not supported

This patch makes unsupported tests visible in
the testsuite summary.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agotest/crypto: add scatter-gather tests for IP and OOP
Damian Nowak [Wed, 3 Jul 2019 11:15:57 +0000 (13:15 +0200)]
test/crypto: add scatter-gather tests for IP and OOP

This patch adds test cases for wireless in-place
and out-of-place auth-cipher operations with
scatter-gather lists as input and output mbufs.
Test cases include buffer appended digest
generation with encryption and buffer decryption
with appended digest verification.
It also adds cases where digest is encrypted
only partially.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agotest/crypto: add KASUMI test cases for auth-cipher
Damian Nowak [Wed, 3 Jul 2019 11:15:56 +0000 (13:15 +0200)]
test/crypto: add KASUMI test cases for auth-cipher

This patch adds test cases for kasumi in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agotest/crypto: add ZUC test cases for auth-cipher
Damian Nowak [Wed, 3 Jul 2019 11:15:55 +0000 (13:15 +0200)]
test/crypto: add ZUC test cases for auth-cipher

This patch adds test cases for zuc in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agotest/crypto: add SNOW3G test cases for auth-cipher
Damian Nowak [Wed, 3 Jul 2019 11:15:54 +0000 (13:15 +0200)]
test/crypto: add SNOW3G test cases for auth-cipher

This patch adds test cases for snow3g in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.
It also adds cases where digest is encrypted
only partially.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocrypto/qat: extend support for digest-encrypted auth-cipher
Damian Nowak [Wed, 3 Jul 2019 11:15:53 +0000 (13:15 +0200)]
crypto/qat: extend support for digest-encrypted auth-cipher

This patch adds condition to be met when using
out-of-place auth-cipher operations. It checks
if the digest location overlaps with the data to
be encrypted or decrypted and if so, treats as a
digest-encrypted case.
Patch adds checking, if the digest is being
encrypted or decrypted partially and extends PMD
buffers accordingly.
It also adds feature flag for QuickAssist
Technology to emphasize it's support for digest
appended auth-cipher operations.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocryptodev: add digest encrypted feature flag
Damian Nowak [Wed, 3 Jul 2019 11:15:52 +0000 (13:15 +0200)]
cryptodev: add digest encrypted feature flag

Some PMDs can only support digest being
encrypted separately in auth-cipher operations.
Thus it is required to add feature flag in PMD
to reflect if it does support digest-appended
both: digest generation with encryption and
decryption with digest verification.
This patch also adds information about new
feature flag to the release notes.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocryptodev: document usage of digest-appended operations
Damian Nowak [Wed, 3 Jul 2019 11:15:51 +0000 (13:15 +0200)]
cryptodev: document usage of digest-appended operations

This patch explains what are the conditions
and how to use digest appended for auth-cipher
operations.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocrypto/openssl: fix free of asymmetric crypto keys
Arek Kusztal [Mon, 1 Jul 2019 14:57:25 +0000 (16:57 +0200)]
crypto/openssl: fix free of asymmetric crypto keys

In case big number need to be freed, data it contains should
also be cleared before especially if it is critical data like
private keys.

Fixes: 3e9d6bd447fb ("crypto/openssl: add RSA and mod asym operations")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocryptodev: free memzone when releasing device
Junxiao Shi [Fri, 28 Jun 2019 19:11:03 +0000 (13:11 -0600)]
cryptodev: free memzone when releasing device

When a cryptodev is created in a primary process,
rte_cryptodev_data_alloc reserves a memzone.
However, this memzone was not released when the cryptodev
is uninitialized. After that, new cryptodev cannot be
created due to memzone name conflict.

This commit frees the memzone when a cryptodev is
uninitialized, fixing this bug. This approach is chosen
instead of keeping and reusing the old memzone, because
the new cryptodev could belong to a different NUMA socket.

Also, rte_cryptodev_data pointer is now properly recorded
in cryptodev_globals.data array.

Bugzilla ID: 105

Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agotest/ipsec: fix destroy SA
Bernard Iremonger [Fri, 28 Jun 2019 13:29:22 +0000 (14:29 +0100)]
test/ipsec: fix destroy SA

Call rte_cryptodev_sym_session_clear() function.

Fixes: 05fe65eb66b2 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agotest/ipsec: fix tear down
Bernard Iremonger [Fri, 28 Jun 2019 13:29:21 +0000 (14:29 +0100)]
test/ipsec: fix tear down

Set freed cop pointers to NULL
Set other freed pointers to NULL instead of 0

Fixes: 05fe65eb66b2 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoexamples/ipsec-secgw: add bypass test case
Konstantin Ananyev [Tue, 25 Jun 2019 23:16:49 +0000 (00:16 +0100)]
examples/ipsec-secgw: add bypass test case

Add simple test-case with all traffic in BYPASS mode.
Useful for some basic test of your network environment.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoexamples/ipsec-secgw: add multi-segment test cases
Konstantin Ananyev [Tue, 25 Jun 2019 23:16:48 +0000 (00:16 +0100)]
examples/ipsec-secgw: add multi-segment test cases

Enhance test scripts to support fragmentation/reassemble functionality.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoexamples/ipsec-secgw: support fragmentation and reassembly
Konstantin Ananyev [Tue, 25 Jun 2019 23:16:47 +0000 (00:16 +0100)]
examples/ipsec-secgw: support fragmentation and reassembly

Add optional ability to fragment packet bigger then mtu,
and reassemble fragmented packet.
To minimize possible performance effect, reassembly is
implemented as RX callback.
To support these features ipsec-secgw relies on librte_ipsec ability
to handle multi-segment packets.
Also when reassemble/fragmentation support is enabled, attached
crypto devices have to support 'In Place SGL' offload capability.
To enable/disable this functionality, two new optional command-line
options are introduced:
  --reassemble <val> - number of entries in reassemble table
  --mtu <val> - MTU value for all attached ports
As separate '--mtu' option is introduced, '-j <val>' option is now used
to specify mbuf data buffer size only.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoexamples/ipsec-secgw: fix packet length
Konstantin Ananyev [Tue, 25 Jun 2019 23:16:46 +0000 (00:16 +0100)]
examples/ipsec-secgw: fix packet length

for packets smaller then 64B some NICs reports pkt_len=64B.
As ipsec-secgw (and librte_ipsec) relies on pkt_len value to determine
payload length, that causes problems for small packets.
To fix the issue, check that pkt_len matches values in IPv4/IPv6 header
and re-adjust pkt_len if necessary.

Fixes: 906257e965b7 ("examples/ipsec-secgw: support IPv6")
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoexamples/ipsec-secgw: fix inline modes
Mariusz Drost [Wed, 26 Jun 2019 13:26:17 +0000 (15:26 +0200)]
examples/ipsec-secgw: fix inline modes

Application ipsec-secgw is not working for IPv4 transport mode and for
IPv6 both transport and tunnel mode.

IPv6 tunnel mode is not working due to wrongly assigned fields of
security association patterns, as it was IPv4, during creation of
inline crypto session.

IPv6 and IPv4 transport mode is iterating through security capabilities
until it reaches tunnel, which causes session to be created as tunnel,
instead of transport. Another issue, is that config file does not
provide source and destination ip addresses for transport mode, which
are required by NIC to perform inline crypto. It uses default addresses
stored in security association (all zeroes), which causes dropped
packages.

To fix that, reorganization of code in create_session() is needed,
to behave appropriately to given protocol (IPv6/IPv4). Change in
iteration through security capabilities is also required, to check
for expected mode (not only tunnel).

For lack of addresses issue, some resolving mechanism is needed.
Approach is to store addresses in security association, as it is
for tunnel mode. Difference is that they are obtained from sp rules,
instead of config file. To do that, sp[4/6]_spi_present() function
is used to find addresses based on spi value, and then stored in
corresponding sa rule. This approach assumes, that every sp rule
for inline crypto have valid addresses, as well as range of addresses
is not supported.

New flags for ipsec_sa structure are required to distinguish between
IPv4 and IPv6 transport modes. Because of that, there is need to
change all checks done on these flags, so they work as expected.

Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload")
Fixes: 9a0752f498d2 ("net/ixgbe: enable inline IPsec")
Cc: stable@dpdk.org
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agonet/ixgbe: fix IP type for crypto session
Mariusz Drost [Wed, 26 Jun 2019 13:26:16 +0000 (15:26 +0200)]
net/ixgbe: fix IP type for crypto session

When ixgbe_crypto_add_sa() is called, it checks whether the ip type is
IPv6 or IPv4 to write correct addresses to the registers. Type itself
is never specified, and act as IPv4, which is the default value.
It causes lack of support for IPv6.

To fix that, ip type needs to be stored in device private data, based on
crypto session ip type field, before the checking is done.

Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload")
Fixes: 9a0752f498d2 ("net/ixgbe: enable inline IPsec")
Cc: stable@dpdk.org
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoapp/compress-perf: fix reliance on integer endianness
Artur Trybula [Tue, 4 Jun 2019 12:41:01 +0000 (14:41 +0200)]
app/compress-perf: fix reliance on integer endianness

Reliance on integer endianness (INCOMPATIBLE_CAST) in function
*parse_window_sz*.

Coverity issue: 328524
Fixes: e0b6287c035d ("app/compress-perf: add parser")
Cc: stable@dpdk.org
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
5 years agoapp/crypto-perf: check lcore job failure
Tomasz Jozwiak [Fri, 14 Jun 2019 20:56:45 +0000 (22:56 +0200)]
app/crypto-perf: check lcore job failure

Currently, there's no return status check from lcore's jobs.
In case of fail - crypto-perf tool returns success anyway.
This patch adds such a detection and returns proper status at the end.

Fixes: ce8af1a4398d ("app/crypto-perf: wait for cores launched by app")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoapp/crypto-perf: fix display once detection
Tomasz Jozwiak [Fri, 14 Jun 2019 22:28:35 +0000 (00:28 +0200)]
app/crypto-perf: fix display once detection

This patch changes 'only_once' variable to 'display_once',
which should be atomic type due to fact, that all runner functions
can be executed in paraller way on different lcores.

Fixes: df52cb3b6e13 ("app/crypto-perf: move verify as single test type")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agocrypto/octeontx: remove unsupported capabilities
Anoob Joseph [Thu, 27 Jun 2019 05:16:43 +0000 (10:46 +0530)]
crypto/octeontx: remove unsupported capabilities

Removing capabilities not supported with latest firmware.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agobaseband/fpga_lte_fec: add driver for FEC on FPGA
Nicolas Chautru [Fri, 14 Jun 2019 16:17:36 +0000 (09:17 -0700)]
baseband/fpga_lte_fec: add driver for FEC on FPGA

Supports for FEC 4G PMD Driver on FPGA card PAC N3000

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
5 years agobaseband/turbo_sw: support meson build
Nicolas Chautru [Wed, 19 Jun 2019 17:48:38 +0000 (10:48 -0700)]
baseband/turbo_sw: support meson build

Turbo_sw PMD driver now building with meson/ninja
with or without SDK libraries.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
5 years agodoc: update turbo_sw build steps in bbdev guide
Nicolas Chautru [Wed, 19 Jun 2019 17:48:37 +0000 (10:48 -0700)]
doc: update turbo_sw build steps in bbdev guide

The documentation is clarified to point to steps on building the
SDK libraries which are now publicly available:
https://software.intel.com/en-us/articles/flexran-lte-and-5g-nr-fec-software-development-kit-modules

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
5 years agobaseband/turbo_sw: allow to build without SDK dependency
Nicolas Chautru [Wed, 19 Jun 2019 17:48:36 +0000 (10:48 -0700)]
baseband/turbo_sw: allow to build without SDK dependency

Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
5 years agotest/ipsec: improve debug in group tests
Bernard Iremonger [Fri, 7 Jun 2019 10:33:15 +0000 (11:33 +0100)]
test/ipsec: improve debug in group tests

Add dump_grp_pkt() function.
Dump invalid mbuf data in case of error in group tests 12 and 13.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agotest/ipsec: add extra test configuration
Bernard Iremonger [Fri, 7 Jun 2019 10:33:14 +0000 (11:33 +0100)]
test/ipsec: add extra test configuration

Add extra test configuration for BURST_SIZE packets

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agotest/ipsec: fix log messages
Bernard Iremonger [Fri, 7 Jun 2019 10:33:13 +0000 (11:33 +0100)]
test/ipsec: fix log messages

Error log messages after the create_sa() function calls
were using the wrong function name.
The function name is replaced with create_sa.

Fixes: 05fe65eb66b2 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoipsec: include high order bytes of ESN in packet length
Lukasz Bartosik [Wed, 5 Jun 2019 15:31:27 +0000 (17:31 +0200)]
ipsec: include high order bytes of ESN in packet length

When esn is used then high-order 32 bits are included in ICV
calculation however are not transmitted. Update packet length
to be consistent with auth data offset and length before crypto
operation. High-order 32 bits of esn will be removed from packet
length in crypto post processing.

Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoipsec: support multi-segment packets
Konstantin Ananyev [Fri, 31 May 2019 00:00:06 +0000 (01:00 +0100)]
ipsec: support multi-segment packets

Add support for packets that consist of multiple segments.
Take into account that trailer bytes (padding, ESP tail, ICV)
can spawn across multiple segments.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agodoc: clarify xform zeroing in crypto guide
Fiona Trahe [Wed, 15 May 2019 16:36:56 +0000 (17:36 +0100)]
doc: clarify xform zeroing in crypto guide

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agotest/crypto: add NULL algo to loop test mechanism
Fiona Trahe [Fri, 26 Apr 2019 19:31:58 +0000 (20:31 +0100)]
test/crypto: add NULL algo to loop test mechanism

Added NULL algo tests into loop test mechanism used
by block cipher tests as easier to extend there.
Included chain, cipher-only and auth-only use-cases.
Extended to cover out-of-place use-cases and use-cases
where data length is not an 8-byte multiple.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoexamples/ipsec-secgw: add scapy based tests
Marcin Smoczynski [Mon, 24 Jun 2019 13:40:00 +0000 (15:40 +0200)]
examples/ipsec-secgw: add scapy based tests

Add new unittest-like mechanism which uses scapy to craft custom
packets and a set of assertions to check how ipsec-secgw example
application is processing them. Python3 with scapy module is
required by pkttest.sh to run test scripts.

A new mechanism is used to test IPv6 transport mode traffic with
header extensions (trs_ipv6opts.py).

Fix incomplete test log problem by disabling buffering of ipsec-secgw
standard output with stdbuf application.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoexamples/ipsec-secgw: support IPv6 options
Marcin Smoczynski [Mon, 24 Jun 2019 13:39:59 +0000 (15:39 +0200)]
examples/ipsec-secgw: support IPv6 options

Using transport with IPv6 and header extensions requires calculating
total header length including extensions up to ESP header which is
achieved with iteratively parsing extensions when preparing traffic
for processing. Calculated l3_len is later used to determine SPI
field offset for an inbound traffic and to reconstruct L3 header by
librte_ipsec.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agoipsec: fix transport mode for IPv6 with extensions
Marcin Smoczynski [Mon, 24 Jun 2019 13:39:58 +0000 (15:39 +0200)]
ipsec: fix transport mode for IPv6 with extensions

Reconstructing IPv6 header after encryption or decryption requires
updating 'next header' value in the preceding protocol header, which
is determined by parsing IPv6 header and iteratively looking for
next IPv6 header extension.

It is required that 'l3_len' in the mbuf metadata contains a total
length of the IPv6 header with header extensions up to ESP header.

Fixes: 4d7ea3e1459b ("ipsec: implement SA data-path API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agonet: add IPv6 header extension parsing function
Marcin Smoczynski [Mon, 24 Jun 2019 13:39:57 +0000 (15:39 +0200)]
net: add IPv6 header extension parsing function

Introduce new function for IPv6 header extension parsing able to
determine extension length and next protocol number.

This function is helpful when implementing IPv6 header traversing.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
5 years agocrypto/aesni_mb: fix out-of-bounds access
Fan Zhang [Mon, 24 Jun 2019 15:40:52 +0000 (16:40 +0100)]
crypto/aesni_mb: fix out-of-bounds access

This patch fixes the out-of-bounds coverity issue by adding
missed algorithms to the array.

Coverity issue: 337683
Fixes: c68d7aa354f6 ("crypto/aesni_mb: use architecture independent macros")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
5 years agocryptodev: add feature flags to disable
Anoob Joseph [Tue, 25 Jun 2019 05:39:24 +0000 (11:09 +0530)]
cryptodev: add feature flags to disable

Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agomaintainers: claim maintainership of bbdev
Nicolas Chautru [Mon, 17 Jun 2019 18:21:28 +0000 (11:21 -0700)]
maintainers: claim maintainership of bbdev

Reorg within Intel teams causing transfer of maintainership

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
5 years agocryptodev: add option to support both IV and J0 for GCM
Arek Kusztal [Wed, 17 Apr 2019 15:57:51 +0000 (17:57 +0200)]
cryptodev: add option to support both IV and J0 for GCM

This patch adds an option to support both IV (of all supported sizes)
and J0 when using Galois Counter Mode of crypto operation.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
5 years agocrypto/virtio: check PCI config read
Chenbo Xia [Fri, 19 Apr 2019 00:58:34 +0000 (00:58 +0000)]
crypto/virtio: check PCI config read

Fix unchecked return value issue for rte_pci_read_config.

Coverity issue: 302861
Fixes: 25500d4b8076 ("crypto/virtio: support device init")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoapp/compress-perf: print socket id
Fiona Trahe [Tue, 30 Apr 2019 17:10:14 +0000 (17:10 +0000)]
app/compress-perf: print socket id

Added info about socket id used by compression perf
test process and by the driver

Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
5 years agodoc: clarify data plane error handling in compressdev
Fiona Trahe [Wed, 15 May 2019 11:16:07 +0000 (12:16 +0100)]
doc: clarify data plane error handling in compressdev

Fixed some typos and clarified how errors on ops which
fail to get submitted on the enqueue API should be handled.

Fixes: a584d3bea902 ("doc: add compressdev library guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
5 years agoexamples/fips_validation: fix logically dead code
Fan Zhang [Wed, 15 May 2019 15:41:21 +0000 (16:41 +0100)]
examples/fips_validation: fix logically dead code

Coverity issue: 336866, 336841, 336838
Fixes: 41d561cbdd24 ("examples/fips_validation: add power on self test")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
5 years agocrypto/openssl: fix usage of non constant time memcmp
Arek Kusztal [Fri, 31 May 2019 06:59:28 +0000 (08:59 +0200)]
crypto/openssl: fix usage of non constant time memcmp

ANSI C memcmp is not constant time function per spec so it should
be avoided in cryptography usage.

Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocrypto/octeontx: sync mbox changes from kernel driver
Lukasz Bartosik [Wed, 29 May 2019 10:44:03 +0000 (16:14 +0530)]
crypto/octeontx: sync mbox changes from kernel driver

Synchronize mbox with latest changes in kernel driver

Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
5 years agoapp/crypto-perf: fix CSV format
Ankur Dwivedi [Wed, 29 May 2019 06:20:58 +0000 (11:50 +0530)]
app/crypto-perf: fix CSV format

The format for printing float is incorrect for the following fields
in pmd-cyclecount test: Cycles/Op,Cycles/Enq,Cycles/Deq.

Currently, the format is %.f3. This format will round off the number to
the nearest integer and append a 3 after that.

This patch changes the format to %.3f. This will print the number as a
floating point with a precision of 3 fractional digits.

Fixes: 96dfeb609be1 ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
5 years agocrypto/qat: set message field to zero in sym SGL case
Gosia Bakota [Wed, 12 Jun 2019 17:31:41 +0000 (18:31 +0100)]
crypto/qat: set message field to zero in sym SGL case

Fixes: e09231eaa2af ("crypto/qat: add SGL capability")
Cc: stable@dpdk.org
Signed-off-by: Gosia Bakota <gosia.bakota@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agodrivers: fix typo in NXP comments
Thierry Herbelot [Wed, 22 May 2019 09:44:49 +0000 (11:44 +0200)]
drivers: fix typo in NXP comments

Fix another copy'n'paste typo.

Fixes: 531b17a780dc ("bus/fslmc: add QBMAN driver to bus")
Fixes: 6ef6beca8844 ("crypto/caam_jr: add enqueue/dequeue operations")
Fixes: c3e85bdcc6e6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agodoc: fix grammar in prog guides
Thierry Herbelot [Wed, 22 May 2019 09:44:48 +0000 (11:44 +0200)]
doc: fix grammar in prog guides

A copy'n'paste typo was present in three guides.

Fixes: a584d3bea902 ("doc: add compressdev library guide")
Fixes: 4935e1e9f76e ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57cf ("doc: add cryptodev chapter in prog guide")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agodoc: fix triplicated typo in prog guides
Thierry Herbelot [Wed, 22 May 2019 09:44:47 +0000 (11:44 +0200)]
doc: fix triplicated typo in prog guides

A bad formula was copied and pasted.

Fixes: 4935e1e9f76e ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57cf ("doc: add cryptodev chapter in prog guide")
Fixes: a9bb0c44c775 ("doc: add rawdev library guide and doxygen page")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocrypto/mvsam: fix typo in comment
Thierry Herbelot [Wed, 22 May 2019 09:44:46 +0000 (11:44 +0200)]
crypto/mvsam: fix typo in comment

Inverted letters.

Fixes: 8a61c83af2fa ("crypto/mrvl: add mrvl crypto driver")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
5 years agodoc: cleanup test removal in armv8 and openssl guides
Thierry Herbelot [Wed, 22 May 2019 09:44:45 +0000 (11:44 +0200)]
doc: cleanup test removal in armv8 and openssl guides

The perf tests were removed in a previous commit.

Fixes: 2ac67c32837a ("test/crypto: remove crypto perf tests")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
5 years agoapp/compress-perf: fix improper use of negative value
Tomasz Jozwiak [Mon, 20 May 2019 13:26:03 +0000 (15:26 +0200)]
app/compress-perf: fix improper use of negative value

test_data->input_data_sz is passed to a parameter that
cannot be negative.

Coverity issue: 328504
Fixes: b68a82425da4 ("app/compress-perf: add performance measurement")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agocompress/isal: fix use after free
Stephen Hemminger [Tue, 21 May 2019 14:47:13 +0000 (07:47 -0700)]
compress/isal: fix use after free

The release function was using qp->stream after already
releasing it and the null pointer checking was missing.

Also since rte_free(NULL) is a no-op, remove unnecessary
checks for NULL.

Coverity issure: 340860
Fixes: dc49e6aa4879 ("compress/isal: add ISA-L compression functionality")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
5 years agodoc: update bnxt guide
Lance Richardson [Wed, 3 Jul 2019 11:42:47 +0000 (07:42 -0400)]
doc: update bnxt guide

- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
  some time).
- Fixed broken links.

Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
5 years agoapp/testpmd: fix queue offload configuration
Wei Zhao [Thu, 4 Jul 2019 05:35:37 +0000 (13:35 +0800)]
app/testpmd: fix queue offload configuration

When adding offloads from commandline, not only port
related configuration bits should be set, but also queue
related offloads configuration bits, or it will cause error.
For example, test in this process for ixgbe:
(1)./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4
-- -i --portmask=0x1 --port-topology=loop --disable-crc-strip
(2)port stop all
(3)port config all crc-strip on
(4)port start all
we will see "Fail to configure port 0 rx queues" of warning info.

Fixes: 0074d02fca21 ("app/testpmd: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
5 years agoapp/testpmd: fix parsing RSS queue rule
Haiyue Wang [Tue, 25 Jun 2019 10:38:03 +0000 (18:38 +0800)]
app/testpmd: fix parsing RSS queue rule

Declare a local variable 'arg' to hold the pointer to ARGS_ENTRY_ARB,
otherwise, the pop 'arg' in 'parse_int' holds wrong data like 'arg->
offset = 5912737, arg->size = 0', this caused the parse failure.

If calling like 'push_args(ctx, ARGS_ENTRY_ARB..)', the below code for
assigning 'offset & size' will be missed for some gcc optimization.

parse_vc_action_rss_queue
    29c5: c5 f9 ef c0           vpxor  %xmm0,%xmm0,%xmm0
    29c9: 43 8d 44 24 68        lea    0x68(%r12,%r12,1),%eax
    29ce: 48 c7 44 24 20 00 00  movq   $0x0,0x20(%rsp)
    29d5: 00 00
    29d7: c5 f8 29 44 24 10     vmovaps %xmm0,0x10(%rsp)
    29dd: 89 44 24 18           mov    %eax,0x18(%rsp)
    29e1: 48 63 83 0c 01 00 00  movslq 0x10c(%rbx),%rax
    29e8: c7 44 24 1c 02 00 00  movl   $0x2,0x1c(%rsp)
    29ef: 00
    29f0: c5 f8 29 04 24        vmovaps %xmm0,(%rsp)

The above assembly code is from this modification with:
    gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)
    Fedora release 30 (Thirty)
    5.1.11-300.fc30.x86_64

Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
5 years agonet/mlx5: check memory allocation in flow creation
Asaf Penso [Wed, 19 Jun 2019 09:46:24 +0000 (09:46 +0000)]
net/mlx5: check memory allocation in flow creation

rte_calloc functions returns a non-null pointer in case of
success and null pointer in case of failure.

The return value should be checked and the function flow
should take that into consideration.

This patch adds a check for rte_calloc return value in function
flow_list_create.

Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
5 years agonet/mlx5: fix condition for link update fallback
Asaf Penso [Wed, 19 Jun 2019 09:52:45 +0000 (09:52 +0000)]
net/mlx5: fix condition for link update fallback

mlx5_link_update uses the newer ethtool command
ETHTOOL_GLINKSETTINGS to determine interface capabilities but falls
back to the older (deprecated) ETHTOOL_GSET command if the new
method fails for any reason.
The older method only supports reporting of capabilities up to 40G.

However, mlx5_link_update_unlocked_gs can return a failure for a
number of reasons (including the link being down).
Using the older method in cases of transient failure of the method
can result in reporting of reduced capabilities to the application.

The older method (mlx5_link_update_unlocked_gset) should only be
invoked if the newer method returns EOPNOTSUPP.

Fixes: 7d2e32f76cfc ("net/mlx5: fix ethtool link setting call order")
Cc: stable@dpdk.org
Reported-by: Srinivas Narayan <srinivas.narayan@att.com>
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
5 years agonet/mlx5: remove TCF support
Moti Haimovsky [Mon, 1 Jul 2019 09:34:22 +0000 (12:34 +0300)]
net/mlx5: remove TCF support

This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.

Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
5 years agonet/mlx5: fix crash on null operation
Moti Haimovsky [Mon, 1 Jul 2019 09:34:21 +0000 (12:34 +0300)]
net/mlx5: fix crash on null operation

mlx5 implements mlx5_flow_null_drv_ops to be used when a specific
flow typei/driver is not available or invalid.
This routines return error without modifying the rte_flow_error
parameter passed to them which causes testpmd, for example, to crash.
This commit addresses the issue by modifying the rte_flow_error
parameter in theses routines.

Fixes: 0c76d1c9a18d ("net/mlx5: add abstraction for multiple flow drivers")
Fixes: 684dafe795d0 ("net/mlx5: add flow query abstraction interface")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
5 years agonet/octeontx2: add link status operations
Vamsi Attunuru [Wed, 3 Jul 2019 08:31:50 +0000 (14:01 +0530)]
net/octeontx2: add link status operations

Add support for setting the link up and down.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
5 years agonet/octeontx2: support Rx interrupts
Harman Kalra [Sun, 30 Jun 2019 09:22:50 +0000 (14:52 +0530)]
net/octeontx2: support Rx interrupts

This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: add MTU set operation
Vamsi Attunuru [Sun, 2 Jun 2019 11:57:54 +0000 (17:27 +0530)]
net/octeontx2: add MTU set operation

Add MTU set operation and MTU update feature.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: add device stop and close operations
Nithin Dabilpuram [Sun, 30 Jun 2019 09:29:49 +0000 (14:59 +0530)]
net/octeontx2: add device stop and close operations

Add device stop, close and reset operations.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
5 years agonet/octeontx2: add device start operation
Nithin Dabilpuram [Sun, 2 Jun 2019 11:49:04 +0000 (17:19 +0530)]
net/octeontx2: add device start operation

Add device start operation and update the correct
function pointers for Rx and Tx burst functions.

This patch also update the octeontx2 NIC specific documentation.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: add Tx vector version
Nithin Dabilpuram [Sun, 2 Jun 2019 11:37:08 +0000 (17:07 +0530)]
net/octeontx2: add Tx vector version

Add vector version of packet transmit function.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
5 years agonet/octeontx2: add Tx multi segment version
Nithin Dabilpuram [Sun, 2 Jun 2019 11:34:21 +0000 (17:04 +0530)]
net/octeontx2: add Tx multi segment version

Add multi segment version of packet Transmit function.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
5 years agonet/octeontx2: support Tx
Jerin Jacob [Sun, 2 Jun 2019 11:15:37 +0000 (16:45 +0530)]
net/octeontx2: support Tx

Add Tx burst support.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
5 years agonet/octeontx2: add Rx vector version
Jerin Jacob [Sun, 2 Jun 2019 10:21:06 +0000 (15:51 +0530)]
net/octeontx2: add Rx vector version

Add vector version of packet Receive function.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
5 years agonet/octeontx2: add Rx multi segment version
Nithin Dabilpuram [Sun, 2 Jun 2019 09:51:32 +0000 (15:21 +0530)]
net/octeontx2: add Rx multi segment version

Add multi segment version of packet Receive function.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
5 years agonet/octeontx2: support Rx
Jerin Jacob [Sun, 2 Jun 2019 09:32:02 +0000 (15:02 +0530)]
net/octeontx2: support Rx

Add Rx burst support.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
5 years agonet/octeontx2: add FW version get operation
Vamsi Attunuru [Sat, 1 Jun 2019 18:47:13 +0000 (00:17 +0530)]
net/octeontx2: add FW version get operation

Add firmware version get operation.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: support VLAN TPID and PVID for Tx
Vivek Sharma [Sun, 30 Jun 2019 03:49:05 +0000 (09:19 +0530)]
net/octeontx2: support VLAN TPID and PVID for Tx

Implement support for setting VLAN TPID and PVID for Tx packets.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: support VLAN filters
Vivek Sharma [Sun, 30 Jun 2019 03:34:41 +0000 (09:04 +0530)]
net/octeontx2: support VLAN filters

Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: support VLAN offloads
Vivek Sharma [Sun, 30 Jun 2019 02:25:19 +0000 (07:55 +0530)]
net/octeontx2: support VLAN offloads

Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: implement VLAN utility functions
Vivek Sharma [Sun, 30 Jun 2019 01:25:08 +0000 (06:55 +0530)]
net/octeontx2: implement VLAN utility functions

Implement accessory functions needed for VLAN functionality.
Introduce VLAN related structures as well.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
5 years agonet/octeontx2: connect flow API to ethdev ops
Vivek Sharma [Sat, 29 Jun 2019 11:08:49 +0000 (16:38 +0530)]
net/octeontx2: connect flow API to ethdev ops

Connect rte_flow driver ops to ethdev via .filter_ctrl op.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>