app/test-crypto-perf/cperf_test_verify.c

   1 /*-
   2  *   BSD LICENSE
   3  *
   4  *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
   5  *
   6  *   Redistribution and use in source and binary forms, with or without
   7  *   modification, are permitted provided that the following conditions
   8  *   are met:
   9  *
  10  *     * Redistributions of source code must retain the above copyright
  11  *       notice, this list of conditions and the following disclaimer.
  12  *     * Redistributions in binary form must reproduce the above copyright
  13  *       notice, this list of conditions and the following disclaimer in
  14  *       the documentation and/or other materials provided with the
  15  *       distribution.
  16  *     * Neither the name of Intel Corporation nor the names of its
  17  *       contributors may be used to endorse or promote products derived
  18  *       from this software without specific prior written permission.
  19  *
  20  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 #include <rte_malloc.h>
  34 #include <rte_cycles.h>
  35 #include <rte_crypto.h>
  36 #include <rte_cryptodev.h>
  37
  38 #include "cperf_test_verify.h"
  39 #include "cperf_ops.h"
  40
  41 struct cperf_verify_ctx {
  42         uint8_t dev_id;
  43         uint16_t qp_id;
  44         uint8_t lcore_id;
  45
  46         struct rte_mempool *pkt_mbuf_pool_in;
  47         struct rte_mempool *pkt_mbuf_pool_out;
  48         struct rte_mbuf **mbufs_in;
  49         struct rte_mbuf **mbufs_out;
  50
  51         struct rte_mempool *crypto_op_pool;
  52
  53         struct rte_cryptodev_sym_session *sess;
  54
  55         cperf_populate_ops_t populate_ops;
  56
  57         const struct cperf_options *options;
  58         const struct cperf_test_vector *test_vector;
  59 };
  60
  61 struct cperf_op_result {
  62         enum rte_crypto_op_status status;
  63 };
  64
  65 static void
  66 cperf_verify_test_free(struct cperf_verify_ctx *ctx, uint32_t mbuf_nb)
  67 {
  68         uint32_t i;
  69
  70         if (ctx) {
  71                 if (ctx->sess) {
  72                         rte_cryptodev_sym_session_clear(ctx->dev_id, ctx->sess);
  73                         rte_cryptodev_sym_session_free(ctx->sess);
  74                 }
  75
  76                 if (ctx->mbufs_in) {
  77                         for (i = 0; i < mbuf_nb; i++)
  78                                 rte_pktmbuf_free(ctx->mbufs_in[i]);
  79
  80                         rte_free(ctx->mbufs_in);
  81                 }
  82
  83                 if (ctx->mbufs_out) {
  84                         for (i = 0; i < mbuf_nb; i++) {
  85                                 if (ctx->mbufs_out[i] != NULL)
  86                                         rte_pktmbuf_free(ctx->mbufs_out[i]);
  87                         }
  88
  89                         rte_free(ctx->mbufs_out);
  90                 }
  91
  92                 if (ctx->pkt_mbuf_pool_in)
  93                         rte_mempool_free(ctx->pkt_mbuf_pool_in);
  94
  95                 if (ctx->pkt_mbuf_pool_out)
  96                         rte_mempool_free(ctx->pkt_mbuf_pool_out);
  97
  98                 if (ctx->crypto_op_pool)
  99                         rte_mempool_free(ctx->crypto_op_pool);
 100
 101                 rte_free(ctx);
 102         }
 103 }
 104
 105 static struct rte_mbuf *
 106 cperf_mbuf_create(struct rte_mempool *mempool,
 107                 uint32_t segments_nb,
 108                 const struct cperf_options *options,
 109                 const struct cperf_test_vector *test_vector)
 110 {
 111         struct rte_mbuf *mbuf;
 112         uint32_t segment_sz = options->max_buffer_size / segments_nb;
 113         uint32_t last_sz = options->max_buffer_size % segments_nb;
 114         uint8_t *mbuf_data;
 115         uint8_t *test_data =
 116                         (options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
 117                                         test_vector->plaintext.data :
 118                                         test_vector->ciphertext.data;
 119
 120         mbuf = rte_pktmbuf_alloc(mempool);
 121         if (mbuf == NULL)
 122                 goto error;
 123
 124         mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz);
 125         if (mbuf_data == NULL)
 126                 goto error;
 127
 128         memcpy(mbuf_data, test_data, segment_sz);
 129         test_data += segment_sz;
 130         segments_nb--;
 131
 132         while (segments_nb) {
 133                 struct rte_mbuf *m;
 134
 135                 m = rte_pktmbuf_alloc(mempool);
 136                 if (m == NULL)
 137                         goto error;
 138
 139                 rte_pktmbuf_chain(mbuf, m);
 140
 141                 mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz);
 142                 if (mbuf_data == NULL)
 143                         goto error;
 144
 145                 memcpy(mbuf_data, test_data, segment_sz);
 146                 test_data += segment_sz;
 147                 segments_nb--;
 148         }
 149
 150         if (last_sz) {
 151                 mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, last_sz);
 152                 if (mbuf_data == NULL)
 153                         goto error;
 154
 155                 memcpy(mbuf_data, test_data, last_sz);
 156         }
 157
 158         if (options->op_type != CPERF_CIPHER_ONLY) {
 159                 mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf,
 160                                 options->digest_sz);
 161                 if (mbuf_data == NULL)
 162                         goto error;
 163         }
 164
 165         if (options->op_type == CPERF_AEAD) {
 166                 uint8_t *aead = (uint8_t *)rte_pktmbuf_prepend(mbuf,
 167                         RTE_ALIGN_CEIL(options->aead_aad_sz, 16));
 168
 169                 if (aead == NULL)
 170                         goto error;
 171
 172                 memcpy(aead, test_vector->aad.data, test_vector->aad.length);
 173         }
 174
 175         return mbuf;
 176 error:
 177         if (mbuf != NULL)
 178                 rte_pktmbuf_free(mbuf);
 179
 180         return NULL;
 181 }
 182
 183 void *
 184 cperf_verify_test_constructor(struct rte_mempool *sess_mp,
 185                 uint8_t dev_id, uint16_t qp_id,
 186                 const struct cperf_options *options,
 187                 const struct cperf_test_vector *test_vector,
 188                 const struct cperf_op_fns *op_fns)
 189 {
 190         struct cperf_verify_ctx *ctx = NULL;
 191         unsigned int mbuf_idx = 0;
 192         char pool_name[32] = "";
 193
 194         ctx = rte_malloc(NULL, sizeof(struct cperf_verify_ctx), 0);
 195         if (ctx == NULL)
 196                 goto err;
 197
 198         ctx->dev_id = dev_id;
 199         ctx->qp_id = qp_id;
 200
 201         ctx->populate_ops = op_fns->populate_ops;
 202         ctx->options = options;
 203         ctx->test_vector = test_vector;
 204
 205         /* IV goes at the end of the cryptop operation */
 206         uint16_t iv_offset = sizeof(struct rte_crypto_op) +
 207                 sizeof(struct rte_crypto_sym_op);
 208
 209         ctx->sess = op_fns->sess_create(sess_mp, dev_id, options, test_vector,
 210                         iv_offset);
 211         if (ctx->sess == NULL)
 212                 goto err;
 213
 214         snprintf(pool_name, sizeof(pool_name), "cperf_pool_in_cdev_%d",
 215                         dev_id);
 216
 217         ctx->pkt_mbuf_pool_in = rte_pktmbuf_pool_create(pool_name,
 218                         options->pool_sz * options->segments_nb, 0, 0,
 219                         RTE_PKTMBUF_HEADROOM +
 220                         RTE_CACHE_LINE_ROUNDUP(
 221                                 (options->max_buffer_size / options->segments_nb) +
 222                                 (options->max_buffer_size % options->segments_nb) +
 223                                         options->digest_sz),
 224                         rte_socket_id());
 225
 226         if (ctx->pkt_mbuf_pool_in == NULL)
 227                 goto err;
 228
 229         /* Generate mbufs_in with plaintext populated for test */
 230         ctx->mbufs_in = rte_malloc(NULL,
 231                         (sizeof(struct rte_mbuf *) * ctx->options->pool_sz), 0);
 232
 233         for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) {
 234                 ctx->mbufs_in[mbuf_idx] = cperf_mbuf_create(
 235                                 ctx->pkt_mbuf_pool_in, options->segments_nb,
 236                                 options, test_vector);
 237                 if (ctx->mbufs_in[mbuf_idx] == NULL)
 238                         goto err;
 239         }
 240
 241         if (options->out_of_place == 1) {
 242
 243                 snprintf(pool_name, sizeof(pool_name), "cperf_pool_out_cdev_%d",
 244                                 dev_id);
 245
 246                 ctx->pkt_mbuf_pool_out = rte_pktmbuf_pool_create(
 247                                 pool_name, options->pool_sz, 0, 0,
 248                                 RTE_PKTMBUF_HEADROOM +
 249                                 RTE_CACHE_LINE_ROUNDUP(
 250                                         options->max_buffer_size +
 251                                         options->digest_sz),
 252                                 rte_socket_id());
 253
 254                 if (ctx->pkt_mbuf_pool_out == NULL)
 255                         goto err;
 256         }
 257
 258         ctx->mbufs_out = rte_malloc(NULL,
 259                         (sizeof(struct rte_mbuf *) *
 260                         ctx->options->pool_sz), 0);
 261
 262         for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) {
 263                 if (options->out_of_place == 1) {
 264                         ctx->mbufs_out[mbuf_idx] = cperf_mbuf_create(
 265                                         ctx->pkt_mbuf_pool_out, 1,
 266                                         options, test_vector);
 267                         if (ctx->mbufs_out[mbuf_idx] == NULL)
 268                                 goto err;
 269                 } else {
 270                         ctx->mbufs_out[mbuf_idx] = NULL;
 271                 }
 272         }
 273
 274         snprintf(pool_name, sizeof(pool_name), "cperf_op_pool_cdev_%d",
 275                         dev_id);
 276
 277         uint16_t priv_size = test_vector->cipher_iv.length +
 278                 test_vector->auth_iv.length + test_vector->aead_iv.length;
 279         ctx->crypto_op_pool = rte_crypto_op_pool_create(pool_name,
 280                         RTE_CRYPTO_OP_TYPE_SYMMETRIC, options->pool_sz,
 281                         512, priv_size, rte_socket_id());
 282         if (ctx->crypto_op_pool == NULL)
 283                 goto err;
 284
 285         return ctx;
 286 err:
 287         cperf_verify_test_free(ctx, mbuf_idx);
 288
 289         return NULL;
 290 }
 291
 292 static int
 293 cperf_verify_op(struct rte_crypto_op *op,
 294                 const struct cperf_options *options,
 295                 const struct cperf_test_vector *vector)
 296 {
 297         const struct rte_mbuf *m;
 298         uint32_t len;
 299         uint16_t nb_segs;
 300         uint8_t *data;
 301         uint32_t cipher_offset, auth_offset;
 302         uint8_t cipher, auth;
 303         int res = 0;
 304
 305         if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS)
 306                 return 1;
 307
 308         if (op->sym->m_dst)
 309                 m = op->sym->m_dst;
 310         else
 311                 m = op->sym->m_src;
 312         nb_segs = m->nb_segs;
 313         len = 0;
 314         while (m && nb_segs != 0) {
 315                 len += m->data_len;
 316                 m = m->next;
 317                 nb_segs--;
 318         }
 319
 320         data = rte_malloc(NULL, len, 0);
 321         if (data == NULL)
 322                 return 1;
 323
 324         if (op->sym->m_dst)
 325                 m = op->sym->m_dst;
 326         else
 327                 m = op->sym->m_src;
 328         nb_segs = m->nb_segs;
 329         len = 0;
 330         while (m && nb_segs != 0) {
 331                 memcpy(data + len, rte_pktmbuf_mtod(m, uint8_t *),
 332                                 m->data_len);
 333                 len += m->data_len;
 334                 m = m->next;
 335                 nb_segs--;
 336         }
 337
 338         switch (options->op_type) {
 339         case CPERF_CIPHER_ONLY:
 340                 cipher = 1;
 341                 cipher_offset = 0;
 342                 auth = 0;
 343                 auth_offset = 0;
 344                 break;
 345         case CPERF_CIPHER_THEN_AUTH:
 346                 cipher = 1;
 347                 cipher_offset = 0;
 348                 auth = 1;
 349                 auth_offset = options->test_buffer_size;
 350                 break;
 351         case CPERF_AUTH_ONLY:
 352                 cipher = 0;
 353                 cipher_offset = 0;
 354                 auth = 1;
 355                 auth_offset = options->test_buffer_size;
 356                 break;
 357         case CPERF_AUTH_THEN_CIPHER:
 358                 cipher = 1;
 359                 cipher_offset = 0;
 360                 auth = 1;
 361                 auth_offset = options->test_buffer_size;
 362                 break;
 363         case CPERF_AEAD:
 364                 cipher = 1;
 365                 cipher_offset = vector->aad.length;
 366                 auth = 1;
 367                 auth_offset = vector->aad.length + options->test_buffer_size;
 368                 break;
 369         default:
 370                 res = 1;
 371                 goto out;
 372         }
 373
 374         if (cipher == 1) {
 375                 if (options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
 376                         res += memcmp(data + cipher_offset,
 377                                         vector->ciphertext.data,
 378                                         options->test_buffer_size);
 379                 else
 380                         res += memcmp(data + cipher_offset,
 381                                         vector->plaintext.data,
 382                                         options->test_buffer_size);
 383         }
 384
 385         if (auth == 1) {
 386                 if (options->auth_op == RTE_CRYPTO_AUTH_OP_GENERATE)
 387                         res += memcmp(data + auth_offset,
 388                                         vector->digest.data,
 389                                         options->digest_sz);
 390         }
 391
 392 out:
 393         rte_free(data);
 394         return !!res;
 395 }
 396
 397 int
 398 cperf_verify_test_runner(void *test_ctx)
 399 {
 400         struct cperf_verify_ctx *ctx = test_ctx;
 401
 402         uint64_t ops_enqd = 0, ops_enqd_total = 0, ops_enqd_failed = 0;
 403         uint64_t ops_deqd = 0, ops_deqd_total = 0, ops_deqd_failed = 0;
 404         uint64_t ops_failed = 0;
 405
 406         static int only_once;
 407
 408         uint64_t i, m_idx = 0;
 409         uint16_t ops_unused = 0;
 410
 411         struct rte_crypto_op *ops[ctx->options->max_burst_size];
 412         struct rte_crypto_op *ops_processed[ctx->options->max_burst_size];
 413
 414         uint32_t lcore = rte_lcore_id();
 415
 416 #ifdef CPERF_LINEARIZATION_ENABLE
 417         struct rte_cryptodev_info dev_info;
 418         int linearize = 0;
 419
 420         /* Check if source mbufs require coalescing */
 421         if (ctx->options->segments_nb > 1) {
 422                 rte_cryptodev_info_get(ctx->dev_id, &dev_info);
 423                 if ((dev_info.feature_flags &
 424                                 RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == 0)
 425                         linearize = 1;
 426         }
 427 #endif /* CPERF_LINEARIZATION_ENABLE */
 428
 429         ctx->lcore_id = lcore;
 430
 431         if (!ctx->options->csv)
 432                 printf("\n# Running verify test on device: %u, lcore: %u\n",
 433                         ctx->dev_id, lcore);
 434
 435         uint16_t iv_offset = sizeof(struct rte_crypto_op) +
 436                 sizeof(struct rte_crypto_sym_op);
 437
 438         while (ops_enqd_total < ctx->options->total_ops) {
 439
 440                 uint16_t burst_size = ((ops_enqd_total + ctx->options->max_burst_size)
 441                                 <= ctx->options->total_ops) ?
 442                                                 ctx->options->max_burst_size :
 443                                                 ctx->options->total_ops -
 444                                                 ops_enqd_total;
 445
 446                 uint16_t ops_needed = burst_size - ops_unused;
 447
 448                 /* Allocate crypto ops from pool */
 449                 if (ops_needed != rte_crypto_op_bulk_alloc(
 450                                 ctx->crypto_op_pool,
 451                                 RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 452                                 ops, ops_needed)) {
 453                         RTE_LOG(ERR, USER1,
 454                                 "Failed to allocate more crypto operations "
 455                                 "from the the crypto operation pool.\n"
 456                                 "Consider increasing the pool size "
 457                                 "with --pool-sz\n");
 458                         return -1;
 459                 }
 460
 461                 /* Setup crypto op, attach mbuf etc */
 462                 (ctx->populate_ops)(ops, &ctx->mbufs_in[m_idx],
 463                                 &ctx->mbufs_out[m_idx],
 464                                 ops_needed, ctx->sess, ctx->options,
 465                                 ctx->test_vector, iv_offset);
 466
 467 #ifdef CPERF_LINEARIZATION_ENABLE
 468                 if (linearize) {
 469                         /* PMD doesn't support scatter-gather and source buffer
 470                          * is segmented.
 471                          * We need to linearize it before enqueuing.
 472                          */
 473                         for (i = 0; i < burst_size; i++)
 474                                 rte_pktmbuf_linearize(ops[i]->sym->m_src);
 475                 }
 476 #endif /* CPERF_LINEARIZATION_ENABLE */
 477
 478                 /* Enqueue burst of ops on crypto device */
 479                 ops_enqd = rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id,
 480                                 ops, burst_size);
 481                 if (ops_enqd < burst_size)
 482                         ops_enqd_failed++;
 483
 484                 /**
 485                  * Calculate number of ops not enqueued (mainly for hw
 486                  * accelerators whose ingress queue can fill up).
 487                  */
 488                 ops_unused = burst_size - ops_enqd;
 489                 ops_enqd_total += ops_enqd;
 490
 491
 492                 /* Dequeue processed burst of ops from crypto device */
 493                 ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
 494                                 ops_processed, ctx->options->max_burst_size);
 495
 496                 m_idx += ops_needed;
 497                 if (m_idx + ctx->options->max_burst_size > ctx->options->pool_sz)
 498                         m_idx = 0;
 499
 500                 if (ops_deqd == 0) {
 501                         /**
 502                          * Count dequeue polls which didn't return any
 503                          * processed operations. This statistic is mainly
 504                          * relevant to hw accelerators.
 505                          */
 506                         ops_deqd_failed++;
 507                         continue;
 508                 }
 509
 510                 for (i = 0; i < ops_deqd; i++) {
 511                         if (cperf_verify_op(ops_processed[i], ctx->options,
 512                                                 ctx->test_vector))
 513                                 ops_failed++;
 514                         /* free crypto ops so they can be reused. We don't free
 515                          * the mbufs here as we don't want to reuse them as
 516                          * the crypto operation will change the data and cause
 517                          * failures.
 518                          */
 519                         rte_crypto_op_free(ops_processed[i]);
 520                 }
 521                 ops_deqd_total += ops_deqd;
 522         }
 523
 524         /* Dequeue any operations still in the crypto device */
 525
 526         while (ops_deqd_total < ctx->options->total_ops) {
 527                 /* Sending 0 length burst to flush sw crypto device */
 528                 rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
 529
 530                 /* dequeue burst */
 531                 ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
 532                                 ops_processed, ctx->options->max_burst_size);
 533                 if (ops_deqd == 0) {
 534                         ops_deqd_failed++;
 535                         continue;
 536                 }
 537
 538                 for (i = 0; i < ops_deqd; i++) {
 539                         if (cperf_verify_op(ops_processed[i], ctx->options,
 540                                                 ctx->test_vector))
 541                                 ops_failed++;
 542                         /* free crypto ops so they can be reused. We don't free
 543                          * the mbufs here as we don't want to reuse them as
 544                          * the crypto operation will change the data and cause
 545                          * failures.
 546                          */
 547                         rte_crypto_op_free(ops_processed[i]);
 548                 }
 549                 ops_deqd_total += ops_deqd;
 550         }
 551
 552         if (!ctx->options->csv) {
 553                 if (!only_once)
 554                         printf("%12s%12s%12s%12s%12s%12s%12s%12s\n\n",
 555                                 "lcore id", "Buf Size", "Burst size",
 556                                 "Enqueued", "Dequeued", "Failed Enq",
 557                                 "Failed Deq", "Failed Ops");
 558                 only_once = 1;
 559
 560                 printf("%12u%12u%12u%12"PRIu64"%12"PRIu64"%12"PRIu64
 561                                 "%12"PRIu64"%12"PRIu64"\n",
 562                                 ctx->lcore_id,
 563                                 ctx->options->max_buffer_size,
 564                                 ctx->options->max_burst_size,
 565                                 ops_enqd_total,
 566                                 ops_deqd_total,
 567                                 ops_enqd_failed,
 568                                 ops_deqd_failed,
 569                                 ops_failed);
 570         } else {
 571                 if (!only_once)
 572                         printf("\n# lcore id, Buffer Size(B), "
 573                                 "Burst Size,Enqueued,Dequeued,Failed Enq,"
 574                                 "Failed Deq,Failed Ops\n");
 575                 only_once = 1;
 576
 577                 printf("%10u;%10u;%u;%"PRIu64";%"PRIu64";%"PRIu64";%"PRIu64";"
 578                                 "%"PRIu64"\n",
 579                                 ctx->lcore_id,
 580                                 ctx->options->max_buffer_size,
 581                                 ctx->options->max_burst_size,
 582                                 ops_enqd_total,
 583                                 ops_deqd_total,
 584                                 ops_enqd_failed,
 585                                 ops_deqd_failed,
 586                                 ops_failed);
 587         }
 588
 589         return 0;
 590 }
 591
 592
 593
 594 void
 595 cperf_verify_test_destructor(void *arg)
 596 {
 597         struct cperf_verify_ctx *ctx = arg;
 598
 599         if (ctx == NULL)
 600                 return;
 601
 602         rte_cryptodev_stop(ctx->dev_id);
 603
 604         cperf_verify_test_free(ctx, ctx->options->pool_sz);
 605 }