app/test-pmd/parameters.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2017 Intel Corporation
   3  */
   4
   5 #include <errno.h>
   6 #include <getopt.h>
   7 #include <stdarg.h>
   8 #include <stdio.h>
   9 #include <stdlib.h>
  10 #include <signal.h>
  11 #include <string.h>
  12 #include <time.h>
  13 #include <fcntl.h>
  14 #include <sys/types.h>
  15
  16 #include <sys/queue.h>
  17 #include <sys/stat.h>
  18
  19 #include <stdint.h>
  20 #include <unistd.h>
  21 #include <inttypes.h>
  22
  23 #include <rte_common.h>
  24 #include <rte_byteorder.h>
  25 #include <rte_log.h>
  26 #include <rte_debug.h>
  27 #include <rte_cycles.h>
  28 #include <rte_memory.h>
  29 #include <rte_launch.h>
  30 #include <rte_eal.h>
  31 #include <rte_per_lcore.h>
  32 #include <rte_lcore.h>
  33 #include <rte_atomic.h>
  34 #include <rte_branch_prediction.h>
  35 #include <rte_mempool.h>
  36 #include <rte_interrupts.h>
  37 #include <rte_pci.h>
  38 #include <rte_ether.h>
  39 #include <rte_ethdev.h>
  40 #include <rte_string_fns.h>
  41 #ifdef RTE_NET_BOND
  42 #include <rte_eth_bond.h>
  43 #endif
  44 #include <rte_flow.h>
  45
  46 #include "testpmd.h"
  47
  48 static void
  49 usage(char* progname)
  50 {
  51         printf("\nUsage: %s [EAL options] -- [testpmd options]\n\n",
  52                progname);
  53 #ifdef RTE_LIB_CMDLINE
  54         printf("  --interactive: run in interactive mode.\n");
  55         printf("  --cmdline-file: execute cli commands before startup.\n");
  56 #endif
  57         printf("  --auto-start: start forwarding on init "
  58                "[always when non-interactive].\n");
  59         printf("  --help: display this message and quit.\n");
  60         printf("  --tx-first: start forwarding sending a burst first "
  61                "(only if interactive is disabled).\n");
  62         printf("  --stats-period=PERIOD: statistics will be shown "
  63                "every PERIOD seconds (only if interactive is disabled).\n");
  64         printf("  --nb-cores=N: set the number of forwarding cores "
  65                "(1 <= N <= %d).\n", nb_lcores);
  66         printf("  --nb-ports=N: set the number of forwarding ports "
  67                "(1 <= N <= %d).\n", nb_ports);
  68         printf("  --coremask=COREMASK: hexadecimal bitmask of cores running "
  69                "the packet forwarding test. The main lcore is reserved for "
  70                "command line parsing only, and cannot be masked on for "
  71                "packet forwarding.\n");
  72         printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
  73                "by the packet forwarding test.\n");
  74         printf("  --portlist=PORTLIST: list of forwarding ports\n");
  75         printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
  76                "RX memory buffers (mbufs).\n");
  77         printf("  --no-numa: disable NUMA-aware allocation.\n");
  78         printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
  79                "specify the socket on which the memory pool "
  80                "used by the port will be allocated.\n");
  81         printf("  --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
  82                "specify the socket on which the TX/RX rings for "
  83                "the port will be allocated "
  84                "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
  85         printf("  --socket-num=N: set socket from which all memory is allocated "
  86                "in NUMA mode.\n");
  87         printf("  --mbuf-size=N,[N1[,..Nn]: set the data size of mbuf to "
  88                "N bytes. If multiple numbers are specified the extra pools "
  89                "will be created to receive with packet split features\n");
  90         printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
  91                "in mbuf pools.\n");
  92         printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
  93         printf("  --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
  94                "size to N bytes.\n");
  95 #ifdef RTE_LIB_CMDLINE
  96         printf("  --eth-peers-configfile=name: config file with ethernet addresses "
  97                "of peer ports.\n");
  98         printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
  99                "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
 100 #endif
 101         printf("  --pkt-filter-mode=N: set Flow Director mode "
 102                "(N: none (default mode) or signature or perfect).\n");
 103         printf("  --pkt-filter-report-hash=N: set Flow Director report mode "
 104                "(N: none  or match (default) or always).\n");
 105         printf("  --pkt-filter-size=N: set Flow Director mode "
 106                "(N: 64K (default mode) or 128K or 256K).\n");
 107         printf("  --pkt-filter-drop-queue=N: set drop-queue. "
 108                "In perfect mode, when you add a rule with queue = -1 "
 109                "the packet will be enqueued into the rx drop-queue. "
 110                "If the drop-queue doesn't exist, the packet is dropped. "
 111                "By default drop-queue=127.\n");
 112 #ifdef RTE_LIB_LATENCYSTATS
 113         printf("  --latencystats=N: enable latency and jitter statistcs "
 114                "monitoring on forwarding lcore id N.\n");
 115 #endif
 116         printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
 117         printf("  --enable-scatter: enable scattered Rx.\n");
 118         printf("  --enable-lro: enable large receive offload.\n");
 119         printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 120         printf("  --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
 121         printf("  --enable-hw-vlan: enable hardware vlan.\n");
 122         printf("  --enable-hw-vlan-filter: enable hardware vlan filter.\n");
 123         printf("  --enable-hw-vlan-strip: enable hardware vlan strip.\n");
 124         printf("  --enable-hw-vlan-extend: enable hardware vlan extend.\n");
 125         printf("  --enable-hw-qinq-strip: enable hardware qinq strip.\n");
 126         printf("  --enable-drop-en: enable per queue packet drop.\n");
 127         printf("  --disable-rss: disable rss.\n");
 128         printf("  --port-topology=<paired|chained|loop>: set port topology (paired "
 129                "is default).\n");
 130         printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
 131                list_pkt_forwarding_modes());
 132         printf("  --forward-mode=5tswap: set forwarding mode to "
 133                         "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
 134         printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
 135         printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
 136         printf("  --rss-level-inner: set RSS hash level to innermost\n");
 137         printf("  --rss-level-outer: set RSS hash level to outermost\n");
 138         printf("  --rxq=N: set the number of RX queues per port to N.\n");
 139         printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
 140         printf("  --txq=N: set the number of TX queues per port to N.\n");
 141         printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
 142         printf("  --hairpinq=N: set the number of hairpin queues per port to "
 143                "N.\n");
 144         printf("  --burst=N: set the number of packets per burst to N.\n");
 145         printf("  --flowgen-clones=N: set the number of single packet clones to send in flowgen mode. Should be less than burst value.\n");
 146         printf("  --flowgen-flows=N: set the number of flows in flowgen mode to N (1 <= N <= INT32_MAX).\n");
 147         printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
 148         printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
 149         printf("  --rxht=N: set the host threshold register of RX rings to N.\n");
 150         printf("  --rxfreet=N: set the free threshold of RX descriptors to N "
 151                "(0 <= N < value of rxd).\n");
 152         printf("  --rxwt=N: set the write-back threshold register of RX rings to N.\n");
 153         printf("  --txpt=N: set the prefetch threshold register of TX rings to N.\n");
 154         printf("  --txht=N: set the nhost threshold register of TX rings to N.\n");
 155         printf("  --txwt=N: set the write-back threshold register of TX rings to N.\n");
 156         printf("  --txfreet=N: set the transmit free threshold of TX rings to N "
 157                "(0 <= N <= value of txd).\n");
 158         printf("  --txrst=N: set the transmit RS bit threshold of TX rings to N "
 159                "(0 <= N <= value of txd).\n");
 160         printf("  --no-flush-rx: Don't flush RX streams before forwarding."
 161                " Used mainly with PCAP drivers.\n");
 162         printf("  --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
 163         printf("  --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
 164         printf("  --txpkts=X[,Y]*: set TX segment sizes"
 165                 " or total packet length.\n");
 166         printf("  --txonly-multi-flow: generate multiple flows in txonly mode\n");
 167         printf("  --tx-ip=src,dst: IP addresses in Tx-only mode\n");
 168         printf("  --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
 169         printf("  --eth-link-speed: force link speed.\n");
 170         printf("  --disable-link-check: disable check on link status when "
 171                "starting/stopping ports.\n");
 172         printf("  --disable-device-start: do not automatically start port\n");
 173         printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
 174         printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
 175         printf("  --bitrate-stats=N: set the logical core N to perform "
 176                 "bit-rate calculation.\n");
 177         printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 178                "enable print of designated event or all of them.\n");
 179         printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 180                "disable print of designated event or all of them.\n");
 181         printf("  --flow-isolate-all: "
 182                "requests flow API isolated mode on all ports at initialization time.\n");
 183         printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
 184         printf("  --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
 185         printf("  --hot-plug: enable hot plug for device.\n");
 186         printf("  --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
 187         printf("  --geneve-parsed-port=N: UPD port to parse GENEVE tunnel protocol\n");
 188 #ifndef RTE_EXEC_ENV_WINDOWS
 189         printf("  --mlockall: lock all memory\n");
 190         printf("  --no-mlockall: do not lock all memory\n");
 191 #endif
 192         printf("  --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
 193                "    native: use regular DPDK memory to create and populate mempool\n"
 194                "    anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
 195                "    xmem: use anonymous memory to create and populate mempool\n"
 196                "    xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
 197         printf("  --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
 198         printf("  --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
 199         printf("  --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
 200         printf("  --noisy-lkup-num-writes=N: do N random writes per packet\n");
 201         printf("  --noisy-lkup-num-reads=N: do N random reads per packet\n");
 202         printf("  --noisy-lkup-num-reads-writes=N: do N random reads and writes per packet\n");
 203         printf("  --no-iova-contig: mempool memory can be IOVA non contiguous. "
 204                "valid only with --mp-alloc=anon\n");
 205         printf("  --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
 206                "enabled\n");
 207         printf("  --record-core-cycles: enable measurement of CPU cycles.\n");
 208         printf("  --record-burst-stats: enable display of RX and TX bursts.\n");
 209         printf("  --hairpin-mode=0xXX: bitmask set the hairpin port mode.\n"
 210                "    0x10 - explicit Tx rule, 0x02 - hairpin ports paired\n"
 211                "    0x01 - hairpin ports loop, 0x00 - hairpin port self\n");
 212 }
 213
 214 #ifdef RTE_LIB_CMDLINE
 215 static int
 216 init_peer_eth_addrs(const char *config_filename)
 217 {
 218         FILE *config_file;
 219         portid_t i;
 220         char buf[50];
 221
 222         config_file = fopen(config_filename, "r");
 223         if (config_file == NULL) {
 224                 perror("Failed to open eth config file\n");
 225                 return -1;
 226         }
 227
 228         for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
 229
 230                 if (fgets(buf, sizeof(buf), config_file) == NULL)
 231                         break;
 232
 233                 if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
 234                         fprintf(stderr, "Bad MAC address format on line %d\n",
 235                                 i + 1);
 236                         fclose(config_file);
 237                         return -1;
 238                 }
 239         }
 240         fclose(config_file);
 241         nb_peer_eth_addrs = (portid_t) i;
 242         return 0;
 243 }
 244 #endif
 245
 246 /*
 247  * Parse the coremask given as argument (hexadecimal string) and set
 248  * the global configuration of forwarding cores.
 249  */
 250 static void
 251 parse_fwd_coremask(const char *coremask)
 252 {
 253         char *end;
 254         unsigned long long int cm;
 255
 256         /* parse hexadecimal string */
 257         end = NULL;
 258         cm = strtoull(coremask, &end, 16);
 259         if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
 260                 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
 261         else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
 262                 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
 263 }
 264
 265 /*
 266  * Parse the coremask given as argument (hexadecimal string) and set
 267  * the global configuration of forwarding cores.
 268  */
 269 static void
 270 parse_fwd_portmask(const char *portmask)
 271 {
 272         char *end;
 273         unsigned long long int pm;
 274
 275         /* parse hexadecimal string */
 276         end = NULL;
 277         pm = strtoull(portmask, &end, 16);
 278         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 279                 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 280         else
 281                 set_fwd_ports_mask((uint64_t) pm);
 282 }
 283
 284 static void
 285 print_invalid_socket_id_error(void)
 286 {
 287         unsigned int i = 0;
 288
 289         fprintf(stderr, "Invalid socket id, options are: ");
 290         for (i = 0; i < num_sockets; i++) {
 291                 fprintf(stderr, "%u%s", socket_ids[i],
 292                         (i == num_sockets - 1) ? "\n" : ",");
 293         }
 294 }
 295
 296 static int
 297 parse_portnuma_config(const char *q_arg)
 298 {
 299         char s[256];
 300         const char *p, *p0 = q_arg;
 301         char *end;
 302         uint8_t i, socket_id;
 303         portid_t port_id;
 304         unsigned size;
 305         enum fieldnames {
 306                 FLD_PORT = 0,
 307                 FLD_SOCKET,
 308                 _NUM_FLD
 309         };
 310         unsigned long int_fld[_NUM_FLD];
 311         char *str_fld[_NUM_FLD];
 312
 313         /* reset from value set at definition */
 314         while ((p = strchr(p0,'(')) != NULL) {
 315                 ++p;
 316                 if((p0 = strchr(p,')')) == NULL)
 317                         return -1;
 318
 319                 size = p0 - p;
 320                 if(size >= sizeof(s))
 321                         return -1;
 322
 323                 snprintf(s, sizeof(s), "%.*s", size, p);
 324                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 325                         return -1;
 326                 for (i = 0; i < _NUM_FLD; i++) {
 327                         errno = 0;
 328                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 329                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 330                                 return -1;
 331                 }
 332                 port_id = (portid_t)int_fld[FLD_PORT];
 333                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 334                         port_id == (portid_t)RTE_PORT_ALL) {
 335                         print_valid_ports();
 336                         return -1;
 337                 }
 338                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 339                 if (new_socket_id(socket_id)) {
 340                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 341                                 print_invalid_socket_id_error();
 342                                 return -1;
 343                         }
 344                         socket_ids[num_sockets++] = socket_id;
 345                 }
 346                 port_numa[port_id] = socket_id;
 347         }
 348
 349         return 0;
 350 }
 351
 352 static int
 353 parse_ringnuma_config(const char *q_arg)
 354 {
 355         char s[256];
 356         const char *p, *p0 = q_arg;
 357         char *end;
 358         uint8_t i, ring_flag, socket_id;
 359         portid_t port_id;
 360         unsigned size;
 361         enum fieldnames {
 362                 FLD_PORT = 0,
 363                 FLD_FLAG,
 364                 FLD_SOCKET,
 365                 _NUM_FLD
 366         };
 367         unsigned long int_fld[_NUM_FLD];
 368         char *str_fld[_NUM_FLD];
 369         #define RX_RING_ONLY 0x1
 370         #define TX_RING_ONLY 0x2
 371         #define RXTX_RING    0x3
 372
 373         /* reset from value set at definition */
 374         while ((p = strchr(p0,'(')) != NULL) {
 375                 ++p;
 376                 if((p0 = strchr(p,')')) == NULL)
 377                         return -1;
 378
 379                 size = p0 - p;
 380                 if(size >= sizeof(s))
 381                         return -1;
 382
 383                 snprintf(s, sizeof(s), "%.*s", size, p);
 384                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 385                         return -1;
 386                 for (i = 0; i < _NUM_FLD; i++) {
 387                         errno = 0;
 388                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 389                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 390                                 return -1;
 391                 }
 392                 port_id = (portid_t)int_fld[FLD_PORT];
 393                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 394                         port_id == (portid_t)RTE_PORT_ALL) {
 395                         print_valid_ports();
 396                         return -1;
 397                 }
 398                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 399                 if (new_socket_id(socket_id)) {
 400                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 401                                 print_invalid_socket_id_error();
 402                                 return -1;
 403                         }
 404                         socket_ids[num_sockets++] = socket_id;
 405                 }
 406                 ring_flag = (uint8_t)int_fld[FLD_FLAG];
 407                 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
 408                         fprintf(stderr,
 409                                 "Invalid ring-flag=%d config for port =%d\n",
 410                                 ring_flag,port_id);
 411                         return -1;
 412                 }
 413
 414                 switch (ring_flag & RXTX_RING) {
 415                 case RX_RING_ONLY:
 416                         rxring_numa[port_id] = socket_id;
 417                         break;
 418                 case TX_RING_ONLY:
 419                         txring_numa[port_id] = socket_id;
 420                         break;
 421                 case RXTX_RING:
 422                         rxring_numa[port_id] = socket_id;
 423                         txring_numa[port_id] = socket_id;
 424                         break;
 425                 default:
 426                         fprintf(stderr,
 427                                 "Invalid ring-flag=%d config for port=%d\n",
 428                                 ring_flag,port_id);
 429                         break;
 430                 }
 431         }
 432
 433         return 0;
 434 }
 435
 436 static int
 437 parse_event_printing_config(const char *optarg, int enable)
 438 {
 439         uint32_t mask = 0;
 440
 441         if (!strcmp(optarg, "unknown"))
 442                 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
 443         else if (!strcmp(optarg, "intr_lsc"))
 444                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
 445         else if (!strcmp(optarg, "queue_state"))
 446                 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
 447         else if (!strcmp(optarg, "intr_reset"))
 448                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
 449         else if (!strcmp(optarg, "vf_mbox"))
 450                 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
 451         else if (!strcmp(optarg, "ipsec"))
 452                 mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
 453         else if (!strcmp(optarg, "macsec"))
 454                 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
 455         else if (!strcmp(optarg, "intr_rmv"))
 456                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
 457         else if (!strcmp(optarg, "dev_probed"))
 458                 mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
 459         else if (!strcmp(optarg, "dev_released"))
 460                 mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
 461         else if (!strcmp(optarg, "flow_aged"))
 462                 mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
 463         else if (!strcmp(optarg, "all"))
 464                 mask = ~UINT32_C(0);
 465         else {
 466                 fprintf(stderr, "Invalid event: %s\n", optarg);
 467                 return -1;
 468         }
 469         if (enable)
 470                 event_print_mask |= mask;
 471         else
 472                 event_print_mask &= ~mask;
 473         return 0;
 474 }
 475
 476 static int
 477 parse_link_speed(int n)
 478 {
 479         uint32_t speed = ETH_LINK_SPEED_FIXED;
 480
 481         switch (n) {
 482         case 1000:
 483                 speed |= ETH_LINK_SPEED_1G;
 484                 break;
 485         case 10000:
 486                 speed |= ETH_LINK_SPEED_10G;
 487                 break;
 488         case 25000:
 489                 speed |= ETH_LINK_SPEED_25G;
 490                 break;
 491         case 40000:
 492                 speed |= ETH_LINK_SPEED_40G;
 493                 break;
 494         case 50000:
 495                 speed |= ETH_LINK_SPEED_50G;
 496                 break;
 497         case 100000:
 498                 speed |= ETH_LINK_SPEED_100G;
 499                 break;
 500         case 200000:
 501                 speed |= ETH_LINK_SPEED_200G;
 502                 break;
 503         case 100:
 504         case 10:
 505         default:
 506                 fprintf(stderr, "Unsupported fixed speed\n");
 507                 return 0;
 508         }
 509
 510         return speed;
 511 }
 512
 513 void
 514 launch_args_parse(int argc, char** argv)
 515 {
 516 #define PARAM_PROC_ID "proc-id"
 517 #define PARAM_NUM_PROCS "num-procs"
 518
 519         int n, opt;
 520         char **argvopt;
 521         int opt_idx;
 522         portid_t pid;
 523         enum { TX, RX };
 524         /* Default offloads for all ports. */
 525         uint64_t rx_offloads = rx_mode.offloads;
 526         uint64_t tx_offloads = tx_mode.offloads;
 527         struct rte_eth_dev_info dev_info;
 528         uint16_t rec_nb_pkts;
 529         int ret;
 530
 531         static struct option lgopts[] = {
 532                 { "help",                       0, 0, 0 },
 533 #ifdef RTE_LIB_CMDLINE
 534                 { "interactive",                0, 0, 0 },
 535                 { "cmdline-file",               1, 0, 0 },
 536                 { "auto-start",                 0, 0, 0 },
 537                 { "eth-peers-configfile",       1, 0, 0 },
 538                 { "eth-peer",                   1, 0, 0 },
 539 #endif
 540                 { "tx-first",                   0, 0, 0 },
 541                 { "stats-period",               1, 0, 0 },
 542                 { "nb-cores",                   1, 0, 0 },
 543                 { "nb-ports",                   1, 0, 0 },
 544                 { "coremask",                   1, 0, 0 },
 545                 { "portmask",                   1, 0, 0 },
 546                 { "portlist",                   1, 0, 0 },
 547                 { "numa",                       0, 0, 0 },
 548                 { "no-numa",                    0, 0, 0 },
 549                 { "mp-anon",                    0, 0, 0 }, /* deprecated */
 550                 { "port-numa-config",           1, 0, 0 },
 551                 { "ring-numa-config",           1, 0, 0 },
 552                 { "socket-num",                 1, 0, 0 },
 553                 { "mbuf-size",                  1, 0, 0 },
 554                 { "total-num-mbufs",            1, 0, 0 },
 555                 { "max-pkt-len",                1, 0, 0 },
 556                 { "max-lro-pkt-size",           1, 0, 0 },
 557                 { "pkt-filter-mode",            1, 0, 0 },
 558                 { "pkt-filter-report-hash",     1, 0, 0 },
 559                 { "pkt-filter-size",            1, 0, 0 },
 560                 { "pkt-filter-drop-queue",      1, 0, 0 },
 561 #ifdef RTE_LIB_LATENCYSTATS
 562                 { "latencystats",               1, 0, 0 },
 563 #endif
 564 #ifdef RTE_LIB_BITRATESTATS
 565                 { "bitrate-stats",              1, 0, 0 },
 566 #endif
 567                 { "disable-crc-strip",          0, 0, 0 },
 568                 { "enable-lro",                 0, 0, 0 },
 569                 { "enable-rx-cksum",            0, 0, 0 },
 570                 { "enable-rx-timestamp",        0, 0, 0 },
 571                 { "enable-scatter",             0, 0, 0 },
 572                 { "enable-hw-vlan",             0, 0, 0 },
 573                 { "enable-hw-vlan-filter",      0, 0, 0 },
 574                 { "enable-hw-vlan-strip",       0, 0, 0 },
 575                 { "enable-hw-vlan-extend",      0, 0, 0 },
 576                 { "enable-hw-qinq-strip",       0, 0, 0 },
 577                 { "enable-drop-en",            0, 0, 0 },
 578                 { "disable-rss",                0, 0, 0 },
 579                 { "port-topology",              1, 0, 0 },
 580                 { "forward-mode",               1, 0, 0 },
 581                 { "rss-ip",                     0, 0, 0 },
 582                 { "rss-udp",                    0, 0, 0 },
 583                 { "rss-level-outer",            0, 0, 0 },
 584                 { "rss-level-inner",            0, 0, 0 },
 585                 { "rxq",                        1, 0, 0 },
 586                 { "txq",                        1, 0, 0 },
 587                 { "rxd",                        1, 0, 0 },
 588                 { "txd",                        1, 0, 0 },
 589                 { "hairpinq",                   1, 0, 0 },
 590                 { "hairpin-mode",               1, 0, 0 },
 591                 { "burst",                      1, 0, 0 },
 592                 { "flowgen-clones",             1, 0, 0 },
 593                 { "flowgen-flows",              1, 0, 0 },
 594                 { "mbcache",                    1, 0, 0 },
 595                 { "txpt",                       1, 0, 0 },
 596                 { "txht",                       1, 0, 0 },
 597                 { "txwt",                       1, 0, 0 },
 598                 { "txfreet",                    1, 0, 0 },
 599                 { "txrst",                      1, 0, 0 },
 600                 { "rxpt",                       1, 0, 0 },
 601                 { "rxht",                       1, 0, 0 },
 602                 { "rxwt",                       1, 0, 0 },
 603                 { "rxfreet",                    1, 0, 0 },
 604                 { "no-flush-rx",        0, 0, 0 },
 605                 { "flow-isolate-all",           0, 0, 0 },
 606                 { "rxoffs",                     1, 0, 0 },
 607                 { "rxpkts",                     1, 0, 0 },
 608                 { "txpkts",                     1, 0, 0 },
 609                 { "txonly-multi-flow",          0, 0, 0 },
 610                 { "eth-link-speed",             1, 0, 0 },
 611                 { "disable-link-check",         0, 0, 0 },
 612                 { "disable-device-start",       0, 0, 0 },
 613                 { "no-lsc-interrupt",           0, 0, 0 },
 614                 { "no-rmv-interrupt",           0, 0, 0 },
 615                 { "print-event",                1, 0, 0 },
 616                 { "mask-event",                 1, 0, 0 },
 617                 { "tx-offloads",                1, 0, 0 },
 618                 { "rx-offloads",                1, 0, 0 },
 619                 { "hot-plug",                   0, 0, 0 },
 620                 { "vxlan-gpe-port",             1, 0, 0 },
 621                 { "geneve-parsed-port",         1, 0, 0 },
 622 #ifndef RTE_EXEC_ENV_WINDOWS
 623                 { "mlockall",                   0, 0, 0 },
 624                 { "no-mlockall",                0, 0, 0 },
 625 #endif
 626                 { "mp-alloc",                   1, 0, 0 },
 627                 { "tx-ip",                      1, 0, 0 },
 628                 { "tx-udp",                     1, 0, 0 },
 629                 { "noisy-tx-sw-buffer-size",    1, 0, 0 },
 630                 { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
 631                 { "noisy-lkup-memory",          1, 0, 0 },
 632                 { "noisy-lkup-num-writes",      1, 0, 0 },
 633                 { "noisy-lkup-num-reads",       1, 0, 0 },
 634                 { "noisy-lkup-num-reads-writes", 1, 0, 0 },
 635                 { "no-iova-contig",             0, 0, 0 },
 636                 { "rx-mq-mode",                 1, 0, 0 },
 637                 { "record-core-cycles",         0, 0, 0 },
 638                 { "record-burst-stats",         0, 0, 0 },
 639                 { PARAM_NUM_PROCS,              1, 0, 0 },
 640                 { PARAM_PROC_ID,                1, 0, 0 },
 641                 { 0, 0, 0, 0 },
 642         };
 643
 644         argvopt = argv;
 645
 646 #ifdef RTE_LIB_CMDLINE
 647 #define SHORTOPTS "i"
 648 #else
 649 #define SHORTOPTS ""
 650 #endif
 651         while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
 652                                  lgopts, &opt_idx)) != EOF) {
 653                 switch (opt) {
 654 #ifdef RTE_LIB_CMDLINE
 655                 case 'i':
 656                         printf("Interactive-mode selected\n");
 657                         interactive = 1;
 658                         break;
 659 #endif
 660                 case 'a':
 661                         printf("Auto-start selected\n");
 662                         auto_start = 1;
 663                         break;
 664
 665                 case 0: /*long options */
 666                         if (!strcmp(lgopts[opt_idx].name, "help")) {
 667                                 usage(argv[0]);
 668                                 exit(EXIT_SUCCESS);
 669                         }
 670 #ifdef RTE_LIB_CMDLINE
 671                         if (!strcmp(lgopts[opt_idx].name, "interactive")) {
 672                                 printf("Interactive-mode selected\n");
 673                                 interactive = 1;
 674                         }
 675                         if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
 676                                 printf("CLI commands to be read from %s\n",
 677                                        optarg);
 678                                 strlcpy(cmdline_filename, optarg,
 679                                         sizeof(cmdline_filename));
 680                         }
 681                         if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
 682                                 printf("Auto-start selected\n");
 683                                 auto_start = 1;
 684                         }
 685                         if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
 686                                 printf("Ports to start sending a burst of "
 687                                                 "packets first\n");
 688                                 tx_first = 1;
 689                         }
 690                         if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
 691                                 char *end = NULL;
 692                                 unsigned int n;
 693
 694                                 n = strtoul(optarg, &end, 10);
 695                                 if ((optarg[0] == '\0') || (end == NULL) ||
 696                                                 (*end != '\0'))
 697                                         break;
 698
 699                                 stats_period = n;
 700                                 break;
 701                         }
 702                         if (!strcmp(lgopts[opt_idx].name,
 703                                     "eth-peers-configfile")) {
 704                                 if (init_peer_eth_addrs(optarg) != 0)
 705                                         rte_exit(EXIT_FAILURE,
 706                                                  "Cannot open logfile\n");
 707                         }
 708                         if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
 709                                 char *port_end;
 710
 711                                 errno = 0;
 712                                 n = strtoul(optarg, &port_end, 10);
 713                                 if (errno != 0 || port_end == optarg || *port_end++ != ',')
 714                                         rte_exit(EXIT_FAILURE,
 715                                                  "Invalid eth-peer: %s", optarg);
 716                                 if (n >= RTE_MAX_ETHPORTS)
 717                                         rte_exit(EXIT_FAILURE,
 718                                                  "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
 719                                                  n, RTE_MAX_ETHPORTS);
 720
 721                                 if (rte_ether_unformat_addr(port_end,
 722                                                 &peer_eth_addrs[n]) < 0)
 723                                         rte_exit(EXIT_FAILURE,
 724                                                  "Invalid ethernet address: %s\n",
 725                                                  port_end);
 726                                 nb_peer_eth_addrs++;
 727                         }
 728 #endif
 729                         if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
 730                                 struct in_addr in;
 731                                 char *end;
 732
 733                                 end = strchr(optarg, ',');
 734                                 if (end == optarg || !end)
 735                                         rte_exit(EXIT_FAILURE,
 736                                                  "Invalid tx-ip: %s", optarg);
 737
 738                                 *end++ = 0;
 739                                 if (inet_pton(AF_INET, optarg, &in) == 0)
 740                                         rte_exit(EXIT_FAILURE,
 741                                                  "Invalid source IP address: %s\n",
 742                                                  optarg);
 743                                 tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
 744
 745                                 if (inet_pton(AF_INET, end, &in) == 0)
 746                                         rte_exit(EXIT_FAILURE,
 747                                                  "Invalid destination IP address: %s\n",
 748                                                  optarg);
 749                                 tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
 750                         }
 751                         if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
 752                                 char *end = NULL;
 753
 754                                 errno = 0;
 755                                 n = strtoul(optarg, &end, 10);
 756                                 if (errno != 0 || end == optarg ||
 757                                     n > UINT16_MAX ||
 758                                     !(*end == '\0' || *end == ','))
 759                                         rte_exit(EXIT_FAILURE,
 760                                                  "Invalid UDP port: %s\n",
 761                                                  optarg);
 762                                 tx_udp_src_port = n;
 763                                 if (*end == ',') {
 764                                         char *dst = end + 1;
 765
 766                                         n = strtoul(dst, &end, 10);
 767                                         if (errno != 0 || end == dst ||
 768                                             n > UINT16_MAX || *end)
 769                                                 rte_exit(EXIT_FAILURE,
 770                                                          "Invalid destination UDP port: %s\n",
 771                                                          dst);
 772                                         tx_udp_dst_port = n;
 773                                 } else {
 774                                         tx_udp_dst_port = n;
 775                                 }
 776
 777                         }
 778                         if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
 779                                 n = atoi(optarg);
 780                                 if (n > 0 && n <= nb_ports)
 781                                         nb_fwd_ports = n;
 782                                 else
 783                                         rte_exit(EXIT_FAILURE,
 784                                                  "Invalid port %d\n", n);
 785                         }
 786                         if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
 787                                 n = atoi(optarg);
 788                                 if (n > 0 && n <= nb_lcores)
 789                                         nb_fwd_lcores = (uint8_t) n;
 790                                 else
 791                                         rte_exit(EXIT_FAILURE,
 792                                                  "nb-cores should be > 0 and <= %d\n",
 793                                                  nb_lcores);
 794                         }
 795                         if (!strcmp(lgopts[opt_idx].name, "coremask"))
 796                                 parse_fwd_coremask(optarg);
 797                         if (!strcmp(lgopts[opt_idx].name, "portmask"))
 798                                 parse_fwd_portmask(optarg);
 799                         if (!strcmp(lgopts[opt_idx].name, "portlist"))
 800                                 parse_fwd_portlist(optarg);
 801                         if (!strcmp(lgopts[opt_idx].name, "no-numa"))
 802                                 numa_support = 0;
 803                         if (!strcmp(lgopts[opt_idx].name, "numa"))
 804                                 numa_support = 1;
 805                         if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
 806                                 mp_alloc_type = MP_ALLOC_ANON;
 807                         }
 808                         if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
 809                                 if (!strcmp(optarg, "native"))
 810                                         mp_alloc_type = MP_ALLOC_NATIVE;
 811                                 else if (!strcmp(optarg, "anon"))
 812                                         mp_alloc_type = MP_ALLOC_ANON;
 813                                 else if (!strcmp(optarg, "xmem"))
 814                                         mp_alloc_type = MP_ALLOC_XMEM;
 815                                 else if (!strcmp(optarg, "xmemhuge"))
 816                                         mp_alloc_type = MP_ALLOC_XMEM_HUGE;
 817                                 else if (!strcmp(optarg, "xbuf"))
 818                                         mp_alloc_type = MP_ALLOC_XBUF;
 819                                 else
 820                                         rte_exit(EXIT_FAILURE,
 821                                                 "mp-alloc %s invalid - must be: "
 822                                                 "native, anon, xmem or xmemhuge\n",
 823                                                  optarg);
 824                         }
 825                         if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
 826                                 if (parse_portnuma_config(optarg))
 827                                         rte_exit(EXIT_FAILURE,
 828                                            "invalid port-numa configuration\n");
 829                         }
 830                         if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
 831                                 if (parse_ringnuma_config(optarg))
 832                                         rte_exit(EXIT_FAILURE,
 833                                            "invalid ring-numa configuration\n");
 834                         if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
 835                                 n = atoi(optarg);
 836                                 if (!new_socket_id((uint8_t)n)) {
 837                                         socket_num = (uint8_t)n;
 838                                 } else {
 839                                         print_invalid_socket_id_error();
 840                                         rte_exit(EXIT_FAILURE,
 841                                                 "Invalid socket id");
 842                                 }
 843                         }
 844                         if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
 845                                 unsigned int mb_sz[MAX_SEGS_BUFFER_SPLIT];
 846                                 unsigned int nb_segs, i;
 847
 848                                 nb_segs = parse_item_list(optarg, "mbuf-size",
 849                                         MAX_SEGS_BUFFER_SPLIT, mb_sz, 0);
 850                                 if (nb_segs <= 0)
 851                                         rte_exit(EXIT_FAILURE,
 852                                                  "bad mbuf-size\n");
 853                                 for (i = 0; i < nb_segs; i++) {
 854                                         if (mb_sz[i] <= 0 || mb_sz[i] > 0xFFFF)
 855                                                 rte_exit(EXIT_FAILURE,
 856                                                          "mbuf-size should be "
 857                                                          "> 0 and < 65536\n");
 858                                         mbuf_data_size[i] = (uint16_t) mb_sz[i];
 859                                 }
 860                                 mbuf_data_size_n = nb_segs;
 861                         }
 862                         if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
 863                                 n = atoi(optarg);
 864                                 if (n > 1024)
 865                                         param_total_num_mbufs = (unsigned)n;
 866                                 else
 867                                         rte_exit(EXIT_FAILURE,
 868                                                  "total-num-mbufs should be > 1024\n");
 869                         }
 870                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
 871                                 n = atoi(optarg);
 872                                 if (n >= RTE_ETHER_MIN_LEN)
 873                                         rx_mode.max_rx_pkt_len = (uint32_t) n;
 874                                 else
 875                                         rte_exit(EXIT_FAILURE,
 876                                                  "Invalid max-pkt-len=%d - should be > %d\n",
 877                                                  n, RTE_ETHER_MIN_LEN);
 878                         }
 879                         if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
 880                                 n = atoi(optarg);
 881                                 rx_mode.max_lro_pkt_size = (uint32_t) n;
 882                         }
 883                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
 884                                 if (!strcmp(optarg, "signature"))
 885                                         fdir_conf.mode =
 886                                                 RTE_FDIR_MODE_SIGNATURE;
 887                                 else if (!strcmp(optarg, "perfect"))
 888                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
 889                                 else if (!strcmp(optarg, "perfect-mac-vlan"))
 890                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
 891                                 else if (!strcmp(optarg, "perfect-tunnel"))
 892                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
 893                                 else if (!strcmp(optarg, "none"))
 894                                         fdir_conf.mode = RTE_FDIR_MODE_NONE;
 895                                 else
 896                                         rte_exit(EXIT_FAILURE,
 897                                                  "pkt-mode-invalid %s invalid - must be: "
 898                                                  "none, signature, perfect, perfect-mac-vlan"
 899                                                  " or perfect-tunnel\n",
 900                                                  optarg);
 901                         }
 902                         if (!strcmp(lgopts[opt_idx].name,
 903                                     "pkt-filter-report-hash")) {
 904                                 if (!strcmp(optarg, "none"))
 905                                         fdir_conf.status =
 906                                                 RTE_FDIR_NO_REPORT_STATUS;
 907                                 else if (!strcmp(optarg, "match"))
 908                                         fdir_conf.status =
 909                                                 RTE_FDIR_REPORT_STATUS;
 910                                 else if (!strcmp(optarg, "always"))
 911                                         fdir_conf.status =
 912                                                 RTE_FDIR_REPORT_STATUS_ALWAYS;
 913                                 else
 914                                         rte_exit(EXIT_FAILURE,
 915                                                  "pkt-filter-report-hash %s invalid "
 916                                                  "- must be: none or match or always\n",
 917                                                  optarg);
 918                         }
 919                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
 920                                 if (!strcmp(optarg, "64K"))
 921                                         fdir_conf.pballoc =
 922                                                 RTE_FDIR_PBALLOC_64K;
 923                                 else if (!strcmp(optarg, "128K"))
 924                                         fdir_conf.pballoc =
 925                                                 RTE_FDIR_PBALLOC_128K;
 926                                 else if (!strcmp(optarg, "256K"))
 927                                         fdir_conf.pballoc =
 928                                                 RTE_FDIR_PBALLOC_256K;
 929                                 else
 930                                         rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
 931                                                  " must be: 64K or 128K or 256K\n",
 932                                                  optarg);
 933                         }
 934                         if (!strcmp(lgopts[opt_idx].name,
 935                                     "pkt-filter-drop-queue")) {
 936                                 n = atoi(optarg);
 937                                 if (n >= 0)
 938                                         fdir_conf.drop_queue = (uint8_t) n;
 939                                 else
 940                                         rte_exit(EXIT_FAILURE,
 941                                                  "drop queue %d invalid - must"
 942                                                  "be >= 0 \n", n);
 943                         }
 944 #ifdef RTE_LIB_LATENCYSTATS
 945                         if (!strcmp(lgopts[opt_idx].name,
 946                                     "latencystats")) {
 947                                 n = atoi(optarg);
 948                                 if (n >= 0) {
 949                                         latencystats_lcore_id = (lcoreid_t) n;
 950                                         latencystats_enabled = 1;
 951                                 } else
 952                                         rte_exit(EXIT_FAILURE,
 953                                                  "invalid lcore id %d for latencystats"
 954                                                  " must be >= 0\n", n);
 955                         }
 956 #endif
 957 #ifdef RTE_LIB_BITRATESTATS
 958                         if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
 959                                 n = atoi(optarg);
 960                                 if (n >= 0) {
 961                                         bitrate_lcore_id = (lcoreid_t) n;
 962                                         bitrate_enabled = 1;
 963                                 } else
 964                                         rte_exit(EXIT_FAILURE,
 965                                                  "invalid lcore id %d for bitrate stats"
 966                                                  " must be >= 0\n", n);
 967                         }
 968 #endif
 969                         if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
 970                                 rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
 971                         if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
 972                                 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
 973                         if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
 974                                 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
 975                         if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
 976                                 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
 977                         if (!strcmp(lgopts[opt_idx].name,
 978                                         "enable-rx-timestamp"))
 979                                 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
 980                         if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
 981                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN;
 982
 983                         if (!strcmp(lgopts[opt_idx].name,
 984                                         "enable-hw-vlan-filter"))
 985                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
 986
 987                         if (!strcmp(lgopts[opt_idx].name,
 988                                         "enable-hw-vlan-strip"))
 989                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
 990
 991                         if (!strcmp(lgopts[opt_idx].name,
 992                                         "enable-hw-vlan-extend"))
 993                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
 994
 995                         if (!strcmp(lgopts[opt_idx].name,
 996                                         "enable-hw-qinq-strip"))
 997                                 rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
 998
 999                         if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
1000                                 rx_drop_en = 1;
1001
1002                         if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
1003                                 rss_hf = 0;
1004                         if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
1005                                 if (!strcmp(optarg, "paired"))
1006                                         port_topology = PORT_TOPOLOGY_PAIRED;
1007                                 else if (!strcmp(optarg, "chained"))
1008                                         port_topology = PORT_TOPOLOGY_CHAINED;
1009                                 else if (!strcmp(optarg, "loop"))
1010                                         port_topology = PORT_TOPOLOGY_LOOP;
1011                                 else
1012                                         rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
1013                                                  " must be: paired, chained or loop\n",
1014                                                  optarg);
1015                         }
1016                         if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
1017                                 set_pkt_forwarding_mode(optarg);
1018                         if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
1019                                 rss_hf = ETH_RSS_IP;
1020                         if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
1021                                 rss_hf = ETH_RSS_UDP;
1022                         if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
1023                                 rss_hf |= ETH_RSS_LEVEL_INNERMOST;
1024                         if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
1025                                 rss_hf |= ETH_RSS_LEVEL_OUTERMOST;
1026                         if (!strcmp(lgopts[opt_idx].name, "rxq")) {
1027                                 n = atoi(optarg);
1028                                 if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
1029                                         nb_rxq = (queueid_t) n;
1030                                 else
1031                                         rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
1032                                                   " >= 0 && <= %u\n", n,
1033                                                   get_allowed_max_nb_rxq(&pid));
1034                         }
1035                         if (!strcmp(lgopts[opt_idx].name, "txq")) {
1036                                 n = atoi(optarg);
1037                                 if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
1038                                         nb_txq = (queueid_t) n;
1039                                 else
1040                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1041                                                   " >= 0 && <= %u\n", n,
1042                                                   get_allowed_max_nb_txq(&pid));
1043                         }
1044                         if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
1045                                 n = atoi(optarg);
1046                                 if (n >= 0 &&
1047                                     check_nb_hairpinq((queueid_t)n) == 0)
1048                                         nb_hairpinq = (queueid_t) n;
1049                                 else
1050                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1051                                                   " >= 0 && <= %u\n", n,
1052                                                   get_allowed_max_nb_hairpinq
1053                                                   (&pid));
1054                                 if ((n + nb_txq) < 0 ||
1055                                     check_nb_txq((queueid_t)(n + nb_txq)) != 0)
1056                                         rte_exit(EXIT_FAILURE, "txq + hairpinq "
1057                                                  "%d invalid - must be"
1058                                                   " >= 0 && <= %u\n",
1059                                                   n + nb_txq,
1060                                                   get_allowed_max_nb_txq(&pid));
1061                                 if ((n + nb_rxq) < 0 ||
1062                                     check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
1063                                         rte_exit(EXIT_FAILURE, "rxq + hairpinq "
1064                                                  "%d invalid - must be"
1065                                                   " >= 0 && <= %u\n",
1066                                                   n + nb_rxq,
1067                                                   get_allowed_max_nb_rxq(&pid));
1068                         }
1069                         if (!nb_rxq && !nb_txq) {
1070                                 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
1071                                                 "be non-zero\n");
1072                         }
1073                         if (!strcmp(lgopts[opt_idx].name, "hairpin-mode")) {
1074                                 char *end = NULL;
1075                                 unsigned int n;
1076
1077                                 errno = 0;
1078                                 n = strtoul(optarg, &end, 0);
1079                                 if (errno != 0 || end == optarg)
1080                                         rte_exit(EXIT_FAILURE, "hairpin mode invalid\n");
1081                                 else
1082                                         hairpin_mode = (uint16_t)n;
1083                         }
1084                         if (!strcmp(lgopts[opt_idx].name, "burst")) {
1085                                 n = atoi(optarg);
1086                                 if (n == 0) {
1087                                         /* A burst size of zero means that the
1088                                          * PMD should be queried for
1089                                          * recommended Rx burst size. Since
1090                                          * testpmd uses a single size for all
1091                                          * ports, port 0 is queried for the
1092                                          * value, on the assumption that all
1093                                          * ports are of the same NIC model.
1094                                          */
1095                                         ret = eth_dev_info_get_print_err(
1096                                                                 0,
1097                                                                 &dev_info);
1098                                         if (ret != 0)
1099                                                 return;
1100
1101                                         rec_nb_pkts = dev_info
1102                                                 .default_rxportconf.burst_size;
1103
1104                                         if (rec_nb_pkts == 0)
1105                                                 rte_exit(EXIT_FAILURE,
1106                                                         "PMD does not recommend a burst size. "
1107                                                         "Provided value must be between "
1108                                                         "1 and %d\n", MAX_PKT_BURST);
1109                                         else if (rec_nb_pkts > MAX_PKT_BURST)
1110                                                 rte_exit(EXIT_FAILURE,
1111                                                         "PMD recommended burst size of %d"
1112                                                         " exceeds maximum value of %d\n",
1113                                                         rec_nb_pkts, MAX_PKT_BURST);
1114                                         printf("Using PMD-provided burst value of %d\n",
1115                                                 rec_nb_pkts);
1116                                         nb_pkt_per_burst = rec_nb_pkts;
1117                                 } else if (n > MAX_PKT_BURST)
1118                                         rte_exit(EXIT_FAILURE,
1119                                                 "burst must be between1 and %d\n",
1120                                                 MAX_PKT_BURST);
1121                                 else
1122                                         nb_pkt_per_burst = (uint16_t) n;
1123                         }
1124                         if (!strcmp(lgopts[opt_idx].name, "flowgen-clones")) {
1125                                 n = atoi(optarg);
1126                                 if (n >= 0)
1127                                         nb_pkt_flowgen_clones = (uint16_t) n;
1128                                 else
1129                                         rte_exit(EXIT_FAILURE,
1130                                                  "clones must be >= 0 and <= current burst\n");
1131                         }
1132                         if (!strcmp(lgopts[opt_idx].name, "flowgen-flows")) {
1133                                 n = atoi(optarg);
1134                                 if (n > 0)
1135                                         nb_flows_flowgen = (int) n;
1136                                 else
1137                                         rte_exit(EXIT_FAILURE,
1138                                                  "flows must be >= 1\n");
1139                         }
1140                         if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
1141                                 n = atoi(optarg);
1142                                 if ((n >= 0) &&
1143                                     (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
1144                                         mb_mempool_cache = (uint16_t) n;
1145                                 else
1146                                         rte_exit(EXIT_FAILURE,
1147                                                  "mbcache must be >= 0 and <= %d\n",
1148                                                  RTE_MEMPOOL_CACHE_MAX_SIZE);
1149                         }
1150                         if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
1151                                 n = atoi(optarg);
1152                                 if (n >= 0)
1153                                         tx_free_thresh = (int16_t)n;
1154                                 else
1155                                         rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
1156                         }
1157                         if (!strcmp(lgopts[opt_idx].name, "txrst")) {
1158                                 n = atoi(optarg);
1159                                 if (n >= 0)
1160                                         tx_rs_thresh = (int16_t)n;
1161                                 else
1162                                         rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
1163                         }
1164                         if (!strcmp(lgopts[opt_idx].name, "rxd")) {
1165                                 n = atoi(optarg);
1166                                 if (n > 0) {
1167                                         if (rx_free_thresh >= n)
1168                                                 rte_exit(EXIT_FAILURE,
1169                                                          "rxd must be > "
1170                                                          "rx_free_thresh(%d)\n",
1171                                                          (int)rx_free_thresh);
1172                                         else
1173                                                 nb_rxd = (uint16_t) n;
1174                                 } else
1175                                         rte_exit(EXIT_FAILURE,
1176                                                  "rxd(%d) invalid - must be > 0\n",
1177                                                  n);
1178                         }
1179                         if (!strcmp(lgopts[opt_idx].name, "txd")) {
1180                                 n = atoi(optarg);
1181                                 if (n > 0)
1182                                         nb_txd = (uint16_t) n;
1183                                 else
1184                                         rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1185                         }
1186                         if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1187                                 n = atoi(optarg);
1188                                 if (n >= 0)
1189                                         tx_pthresh = (int8_t)n;
1190                                 else
1191                                         rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1192                         }
1193                         if (!strcmp(lgopts[opt_idx].name, "txht")) {
1194                                 n = atoi(optarg);
1195                                 if (n >= 0)
1196                                         tx_hthresh = (int8_t)n;
1197                                 else
1198                                         rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1199                         }
1200                         if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1201                                 n = atoi(optarg);
1202                                 if (n >= 0)
1203                                         tx_wthresh = (int8_t)n;
1204                                 else
1205                                         rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1206                         }
1207                         if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1208                                 n = atoi(optarg);
1209                                 if (n >= 0)
1210                                         rx_pthresh = (int8_t)n;
1211                                 else
1212                                         rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1213                         }
1214                         if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1215                                 n = atoi(optarg);
1216                                 if (n >= 0)
1217                                         rx_hthresh = (int8_t)n;
1218                                 else
1219                                         rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1220                         }
1221                         if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1222                                 n = atoi(optarg);
1223                                 if (n >= 0)
1224                                         rx_wthresh = (int8_t)n;
1225                                 else
1226                                         rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1227                         }
1228                         if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1229                                 n = atoi(optarg);
1230                                 if (n >= 0)
1231                                         rx_free_thresh = (int16_t)n;
1232                                 else
1233                                         rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1234                         }
1235                         if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
1236                                 unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
1237                                 unsigned int nb_offs;
1238
1239                                 nb_offs = parse_item_list
1240                                                 (optarg, "rxpkt offsets",
1241                                                  MAX_SEGS_BUFFER_SPLIT,
1242                                                  seg_off, 0);
1243                                 if (nb_offs > 0)
1244                                         set_rx_pkt_offsets(seg_off, nb_offs);
1245                                 else
1246                                         rte_exit(EXIT_FAILURE, "bad rxoffs\n");
1247                         }
1248                         if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
1249                                 unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
1250                                 unsigned int nb_segs;
1251
1252                                 nb_segs = parse_item_list
1253                                                 (optarg, "rxpkt segments",
1254                                                  MAX_SEGS_BUFFER_SPLIT,
1255                                                  seg_len, 0);
1256                                 if (nb_segs > 0)
1257                                         set_rx_pkt_segments(seg_len, nb_segs);
1258                                 else
1259                                         rte_exit(EXIT_FAILURE, "bad rxpkts\n");
1260                         }
1261                         if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1262                                 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1263                                 unsigned int nb_segs;
1264
1265                                 nb_segs = parse_item_list(optarg, "txpkt segments",
1266                                                 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1267                                 if (nb_segs > 0)
1268                                         set_tx_pkt_segments(seg_lengths, nb_segs);
1269                                 else
1270                                         rte_exit(EXIT_FAILURE, "bad txpkts\n");
1271                         }
1272                         if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
1273                                 txonly_multi_flow = 1;
1274                         if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1275                                 no_flush_rx = 1;
1276                         if (!strcmp(lgopts[opt_idx].name, "eth-link-speed")) {
1277                                 n = atoi(optarg);
1278                                 if (n >= 0 && parse_link_speed(n) > 0)
1279                                         eth_link_speed = parse_link_speed(n);
1280                         }
1281                         if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1282                                 no_link_check = 1;
1283                         if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
1284                                 no_device_start = 1;
1285                         if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1286                                 lsc_interrupt = 0;
1287                         if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1288                                 rmv_interrupt = 0;
1289                         if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1290                                 flow_isolate_all = 1;
1291                         if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1292                                 char *end = NULL;
1293                                 n = strtoull(optarg, &end, 16);
1294                                 if (n >= 0)
1295                                         tx_offloads = (uint64_t)n;
1296                                 else
1297                                         rte_exit(EXIT_FAILURE,
1298                                                  "tx-offloads must be >= 0\n");
1299                         }
1300
1301                         if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
1302                                 char *end = NULL;
1303                                 n = strtoull(optarg, &end, 16);
1304                                 if (n >= 0)
1305                                         rx_offloads = (uint64_t)n;
1306                                 else
1307                                         rte_exit(EXIT_FAILURE,
1308                                                  "rx-offloads must be >= 0\n");
1309                         }
1310
1311                         if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
1312                                 n = atoi(optarg);
1313                                 if (n >= 0)
1314                                         vxlan_gpe_udp_port = (uint16_t)n;
1315                                 else
1316                                         rte_exit(EXIT_FAILURE,
1317                                                  "vxlan-gpe-port must be >= 0\n");
1318                         }
1319                         if (!strcmp(lgopts[opt_idx].name,
1320                                     "geneve-parsed-port")) {
1321                                 n = atoi(optarg);
1322                                 if (n >= 0)
1323                                         geneve_udp_port = (uint16_t)n;
1324                                 else
1325                                         rte_exit(EXIT_FAILURE,
1326                                                  "geneve-parsed-port must be >= 0\n");
1327                         }
1328                         if (!strcmp(lgopts[opt_idx].name, "print-event"))
1329                                 if (parse_event_printing_config(optarg, 1)) {
1330                                         rte_exit(EXIT_FAILURE,
1331                                                  "invalid print-event argument\n");
1332                                 }
1333                         if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1334                                 if (parse_event_printing_config(optarg, 0)) {
1335                                         rte_exit(EXIT_FAILURE,
1336                                                  "invalid mask-event argument\n");
1337                                 }
1338                         if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
1339                                 hot_plug = 1;
1340                         if (!strcmp(lgopts[opt_idx].name, "mlockall"))
1341                                 do_mlockall = 1;
1342                         if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
1343                                 do_mlockall = 0;
1344                         if (!strcmp(lgopts[opt_idx].name,
1345                                     "noisy-tx-sw-buffer-size")) {
1346                                 n = atoi(optarg);
1347                                 if (n >= 0)
1348                                         noisy_tx_sw_bufsz = n;
1349                                 else
1350                                         rte_exit(EXIT_FAILURE,
1351                                                 "noisy-tx-sw-buffer-size must be >= 0\n");
1352                         }
1353                         if (!strcmp(lgopts[opt_idx].name,
1354                                     "noisy-tx-sw-buffer-flushtime")) {
1355                                 n = atoi(optarg);
1356                                 if (n >= 0)
1357                                         noisy_tx_sw_buf_flush_time = n;
1358                                 else
1359                                         rte_exit(EXIT_FAILURE,
1360                                                  "noisy-tx-sw-buffer-flushtime must be >= 0\n");
1361                         }
1362                         if (!strcmp(lgopts[opt_idx].name,
1363                                     "noisy-lkup-memory")) {
1364                                 n = atoi(optarg);
1365                                 if (n >= 0)
1366                                         noisy_lkup_mem_sz = n;
1367                                 else
1368                                         rte_exit(EXIT_FAILURE,
1369                                                  "noisy-lkup-memory must be >= 0\n");
1370                         }
1371                         if (!strcmp(lgopts[opt_idx].name,
1372                                     "noisy-lkup-num-writes")) {
1373                                 n = atoi(optarg);
1374                                 if (n >= 0)
1375                                         noisy_lkup_num_writes = n;
1376                                 else
1377                                         rte_exit(EXIT_FAILURE,
1378                                                  "noisy-lkup-num-writes must be >= 0\n");
1379                         }
1380                         if (!strcmp(lgopts[opt_idx].name,
1381                                     "noisy-lkup-num-reads")) {
1382                                 n = atoi(optarg);
1383                                 if (n >= 0)
1384                                         noisy_lkup_num_reads = n;
1385                                 else
1386                                         rte_exit(EXIT_FAILURE,
1387                                                  "noisy-lkup-num-reads must be >= 0\n");
1388                         }
1389                         if (!strcmp(lgopts[opt_idx].name,
1390                                     "noisy-lkup-num-reads-writes")) {
1391                                 n = atoi(optarg);
1392                                 if (n >= 0)
1393                                         noisy_lkup_num_reads_writes = n;
1394                                 else
1395                                         rte_exit(EXIT_FAILURE,
1396                                                  "noisy-lkup-num-reads-writes must be >= 0\n");
1397                         }
1398                         if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
1399                                 mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
1400
1401                         if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
1402                                 char *end = NULL;
1403                                 n = strtoul(optarg, &end, 16);
1404                                 if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS)
1405                                         rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
1406                                 else
1407                                         rte_exit(EXIT_FAILURE,
1408                                                  "rx-mq-mode must be >= 0 and <= %d\n",
1409                                                  ETH_MQ_RX_VMDQ_DCB_RSS);
1410                         }
1411                         if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
1412                                 record_core_cycles = 1;
1413                         if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
1414                                 record_burst_stats = 1;
1415                         if (!strcmp(lgopts[opt_idx].name, PARAM_NUM_PROCS))
1416                                 num_procs = atoi(optarg);
1417                         if (!strcmp(lgopts[opt_idx].name, PARAM_PROC_ID))
1418                                 proc_id = atoi(optarg);
1419                         break;
1420                 case 'h':
1421                         usage(argv[0]);
1422                         exit(EXIT_SUCCESS);
1423                         break;
1424                 default:
1425                         usage(argv[0]);
1426                         fprintf(stderr, "Invalid option: %s\n", argv[optind]);
1427                         rte_exit(EXIT_FAILURE,
1428                                  "Command line is incomplete or incorrect\n");
1429                         break;
1430                 }
1431         }
1432
1433         if (optind != argc) {
1434                 usage(argv[0]);
1435                 fprintf(stderr, "Invalid parameter: %s\n", argv[optind]);
1436                 rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
1437         }
1438
1439         /* Set offload configuration from command line parameters. */
1440         rx_mode.offloads = rx_offloads;
1441         tx_mode.offloads = tx_offloads;
1442
1443         if (mempool_flags & MEMPOOL_F_NO_IOVA_CONTIG &&
1444             mp_alloc_type != MP_ALLOC_ANON) {
1445                 TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
1446                                   "mp-alloc=anon. mempool no-iova-contig is "
1447                                   "ignored\n");
1448                 mempool_flags = 0;
1449         }
1450 }