app/testpmd: remove txqflags option
[dpdk.git] / app / test-pmd / parameters.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2010-2017 Intel Corporation
3  */
4
5 #include <errno.h>
6 #include <getopt.h>
7 #include <stdarg.h>
8 #include <stdio.h>
9 #include <stdlib.h>
10 #include <signal.h>
11 #include <string.h>
12 #include <time.h>
13 #include <fcntl.h>
14 #include <sys/types.h>
15
16 #include <sys/queue.h>
17 #include <sys/stat.h>
18
19 #include <stdint.h>
20 #include <unistd.h>
21 #include <inttypes.h>
22
23 #include <rte_common.h>
24 #include <rte_byteorder.h>
25 #include <rte_log.h>
26 #include <rte_debug.h>
27 #include <rte_cycles.h>
28 #include <rte_memory.h>
29 #include <rte_launch.h>
30 #include <rte_eal.h>
31 #include <rte_per_lcore.h>
32 #include <rte_lcore.h>
33 #include <rte_atomic.h>
34 #include <rte_branch_prediction.h>
35 #include <rte_mempool.h>
36 #include <rte_interrupts.h>
37 #include <rte_pci.h>
38 #include <rte_ether.h>
39 #include <rte_ethdev.h>
40 #include <rte_string_fns.h>
41 #ifdef RTE_LIBRTE_CMDLINE
42 #include <cmdline_parse.h>
43 #include <cmdline_parse_etheraddr.h>
44 #endif
45 #ifdef RTE_LIBRTE_PMD_BOND
46 #include <rte_eth_bond.h>
47 #endif
48 #include <rte_flow.h>
49
50 #include "testpmd.h"
51
52 static void
53 usage(char* progname)
54 {
55         printf("usage: %s "
56 #ifdef RTE_LIBRTE_CMDLINE
57                "[--interactive|-i] "
58                "[--cmdline-file=FILENAME] "
59 #endif
60                "[--help|-h] | [--auto-start|-a] | ["
61                "--tx-first | --stats-period=PERIOD | "
62                "--coremask=COREMASK --portmask=PORTMASK --numa "
63                "--mbuf-size= | --total-num-mbufs= | "
64                "--nb-cores= | --nb-ports= | "
65 #ifdef RTE_LIBRTE_CMDLINE
66                "--eth-peers-configfile= | "
67                "--eth-peer=X,M:M:M:M:M:M | "
68 #endif
69                "--pkt-filter-mode= |"
70                "--rss-ip | --rss-udp | "
71                "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
72                "--txpt= | --txht= | --txwt= | --txfreet= | "
73                "--txrst= | --tx-offloads ]\n",
74                progname);
75 #ifdef RTE_LIBRTE_CMDLINE
76         printf("  --interactive: run in interactive mode.\n");
77         printf("  --cmdline-file: execute cli commands before startup.\n");
78 #endif
79         printf("  --auto-start: start forwarding on init "
80                "[always when non-interactive].\n");
81         printf("  --help: display this message and quit.\n");
82         printf("  --tx-first: start forwarding sending a burst first "
83                "(only if interactive is disabled).\n");
84         printf("  --stats-period=PERIOD: statistics will be shown "
85                "every PERIOD seconds (only if interactive is disabled).\n");
86         printf("  --nb-cores=N: set the number of forwarding cores "
87                "(1 <= N <= %d).\n", nb_lcores);
88         printf("  --nb-ports=N: set the number of forwarding ports "
89                "(1 <= N <= %d).\n", nb_ports);
90         printf("  --coremask=COREMASK: hexadecimal bitmask of cores running "
91                "the packet forwarding test. The master lcore is reserved for "
92                "command line parsing only, and cannot be masked on for "
93                "packet forwarding.\n");
94         printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
95                "by the packet forwarding test.\n");
96         printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
97                "RX memory buffers (mbufs).\n");
98         printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
99                "specify the socket on which the memory pool "
100                "used by the port will be allocated.\n");
101         printf("  --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
102                "specify the socket on which the TX/RX rings for "
103                "the port will be allocated "
104                "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
105         printf("  --socket-num=N: set socket from which all memory is allocated "
106                "in NUMA mode.\n");
107         printf("  --mbuf-size=N: set the data size of mbuf to N bytes.\n");
108         printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
109                "in mbuf pools.\n");
110         printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
111 #ifdef RTE_LIBRTE_CMDLINE
112         printf("  --eth-peers-configfile=name: config file with ethernet addresses "
113                "of peer ports.\n");
114         printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
115                "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
116 #endif
117         printf("  --pkt-filter-mode=N: set Flow Director mode "
118                "(N: none (default mode) or signature or perfect).\n");
119         printf("  --pkt-filter-report-hash=N: set Flow Director report mode "
120                "(N: none  or match (default) or always).\n");
121         printf("  --pkt-filter-size=N: set Flow Director mode "
122                "(N: 64K (default mode) or 128K or 256K).\n");
123         printf("  --pkt-filter-drop-queue=N: set drop-queue. "
124                "In perfect mode, when you add a rule with queue = -1 "
125                "the packet will be enqueued into the rx drop-queue. "
126                "If the drop-queue doesn't exist, the packet is dropped. "
127                "By default drop-queue=127.\n");
128 #ifdef RTE_LIBRTE_LATENCY_STATS
129         printf("  --latencystats=N: enable latency and jitter statistcs "
130                "monitoring on forwarding lcore id N.\n");
131 #endif
132         printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
133         printf("  --enable-lro: enable large receive offload.\n");
134         printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
135         printf("  --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
136         printf("  --disable-hw-vlan: disable hardware vlan.\n");
137         printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
138         printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
139         printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
140         printf("  --enable-drop-en: enable per queue packet drop.\n");
141         printf("  --disable-rss: disable rss.\n");
142         printf("  --port-topology=N: set port topology (N: paired (default) or "
143                "chained).\n");
144         printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
145                list_pkt_forwarding_modes());
146         printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
147         printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
148         printf("  --rxq=N: set the number of RX queues per port to N.\n");
149         printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
150         printf("  --txq=N: set the number of TX queues per port to N.\n");
151         printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
152         printf("  --burst=N: set the number of packets per burst to N.\n");
153         printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
154         printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
155         printf("  --rxht=N: set the host threshold register of RX rings to N.\n");
156         printf("  --rxfreet=N: set the free threshold of RX descriptors to N "
157                "(0 <= N < value of rxd).\n");
158         printf("  --rxwt=N: set the write-back threshold register of RX rings to N.\n");
159         printf("  --txpt=N: set the prefetch threshold register of TX rings to N.\n");
160         printf("  --txht=N: set the nhost threshold register of TX rings to N.\n");
161         printf("  --txwt=N: set the write-back threshold register of TX rings to N.\n");
162         printf("  --txfreet=N: set the transmit free threshold of TX rings to N "
163                "(0 <= N <= value of txd).\n");
164         printf("  --txrst=N: set the transmit RS bit threshold of TX rings to N "
165                "(0 <= N <= value of txd).\n");
166         printf("  --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
167                "tx queues statistics counters mapping "
168                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
169         printf("  --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
170                "rx queues statistics counters mapping "
171                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
172         printf("  --no-flush-rx: Don't flush RX streams before forwarding."
173                " Used mainly with PCAP drivers.\n");
174         printf("  --txpkts=X[,Y]*: set TX segment sizes"
175                 " or total packet length.\n");
176         printf("  --disable-link-check: disable check on link status when "
177                "starting/stopping ports.\n");
178         printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
179         printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
180         printf("  --bitrate-stats=N: set the logical core N to perform "
181                 "bit-rate calculation.\n");
182         printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
183                "enable print of designated event or all of them.\n");
184         printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
185                "disable print of designated event or all of them.\n");
186         printf("  --flow-isolate-all: "
187                "requests flow API isolated mode on all ports at initialization time.\n");
188         printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
189 }
190
191 #ifdef RTE_LIBRTE_CMDLINE
192 static int
193 init_peer_eth_addrs(char *config_filename)
194 {
195         FILE *config_file;
196         portid_t i;
197         char buf[50];
198
199         config_file = fopen(config_filename, "r");
200         if (config_file == NULL) {
201                 perror("Failed to open eth config file\n");
202                 return -1;
203         }
204
205         for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
206
207                 if (fgets(buf, sizeof(buf), config_file) == NULL)
208                         break;
209
210                 if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i],
211                                 sizeof(peer_eth_addrs[i])) < 0) {
212                         printf("Bad MAC address format on line %d\n", i+1);
213                         fclose(config_file);
214                         return -1;
215                 }
216         }
217         fclose(config_file);
218         nb_peer_eth_addrs = (portid_t) i;
219         return 0;
220 }
221 #endif
222
223 /*
224  * Parse the coremask given as argument (hexadecimal string) and set
225  * the global configuration of forwarding cores.
226  */
227 static void
228 parse_fwd_coremask(const char *coremask)
229 {
230         char *end;
231         unsigned long long int cm;
232
233         /* parse hexadecimal string */
234         end = NULL;
235         cm = strtoull(coremask, &end, 16);
236         if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
237                 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
238         else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
239                 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
240 }
241
242 /*
243  * Parse the coremask given as argument (hexadecimal string) and set
244  * the global configuration of forwarding cores.
245  */
246 static void
247 parse_fwd_portmask(const char *portmask)
248 {
249         char *end;
250         unsigned long long int pm;
251
252         /* parse hexadecimal string */
253         end = NULL;
254         pm = strtoull(portmask, &end, 16);
255         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
256                 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
257         else
258                 set_fwd_ports_mask((uint64_t) pm);
259 }
260
261
262 static int
263 parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
264 {
265         char s[256];
266         const char *p, *p0 = q_arg;
267         char *end;
268         enum fieldnames {
269                 FLD_PORT = 0,
270                 FLD_QUEUE,
271                 FLD_STATS_COUNTER,
272                 _NUM_FLD
273         };
274         unsigned long int_fld[_NUM_FLD];
275         char *str_fld[_NUM_FLD];
276         int i;
277         unsigned size;
278
279         /* reset from value set at definition */
280         is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
281
282         while ((p = strchr(p0,'(')) != NULL) {
283                 ++p;
284                 if((p0 = strchr(p,')')) == NULL)
285                         return -1;
286
287                 size = p0 - p;
288                 if(size >= sizeof(s))
289                         return -1;
290
291                 snprintf(s, sizeof(s), "%.*s", size, p);
292                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
293                         return -1;
294                 for (i = 0; i < _NUM_FLD; i++){
295                         errno = 0;
296                         int_fld[i] = strtoul(str_fld[i], &end, 0);
297                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
298                                 return -1;
299                 }
300                 /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
301                 if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
302                         printf("Stats counter not in the correct range 0..%d\n",
303                                         RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
304                         return -1;
305                 }
306
307                 if (!is_rx) {
308                         if ((nb_tx_queue_stats_mappings >=
309                                                 MAX_TX_QUEUE_STATS_MAPPINGS)) {
310                                 printf("exceeded max number of TX queue "
311                                                 "statistics mappings: %hu\n",
312                                                 nb_tx_queue_stats_mappings);
313                                 return -1;
314                         }
315                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
316                                 (uint8_t)int_fld[FLD_PORT];
317                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
318                                 (uint8_t)int_fld[FLD_QUEUE];
319                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
320                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
321                         ++nb_tx_queue_stats_mappings;
322                 }
323                 else {
324                         if ((nb_rx_queue_stats_mappings >=
325                                                 MAX_RX_QUEUE_STATS_MAPPINGS)) {
326                                 printf("exceeded max number of RX queue "
327                                                 "statistics mappings: %hu\n",
328                                                 nb_rx_queue_stats_mappings);
329                                 return -1;
330                         }
331                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
332                                 (uint8_t)int_fld[FLD_PORT];
333                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
334                                 (uint8_t)int_fld[FLD_QUEUE];
335                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
336                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
337                         ++nb_rx_queue_stats_mappings;
338                 }
339
340         }
341 /* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
342 /* than to the default array (that was set at its definition) */
343         is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
344                 (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
345         return 0;
346 }
347
348 static void
349 print_invalid_socket_id_error(void)
350 {
351         unsigned int i = 0;
352
353         printf("Invalid socket id, options are: ");
354         for (i = 0; i < num_sockets; i++) {
355                 printf("%u%s", socket_ids[i],
356                       (i == num_sockets - 1) ? "\n" : ",");
357         }
358 }
359
360 static int
361 parse_portnuma_config(const char *q_arg)
362 {
363         char s[256];
364         const char *p, *p0 = q_arg;
365         char *end;
366         uint8_t i, socket_id;
367         portid_t port_id;
368         unsigned size;
369         enum fieldnames {
370                 FLD_PORT = 0,
371                 FLD_SOCKET,
372                 _NUM_FLD
373         };
374         unsigned long int_fld[_NUM_FLD];
375         char *str_fld[_NUM_FLD];
376         portid_t pid;
377
378         /* reset from value set at definition */
379         while ((p = strchr(p0,'(')) != NULL) {
380                 ++p;
381                 if((p0 = strchr(p,')')) == NULL)
382                         return -1;
383
384                 size = p0 - p;
385                 if(size >= sizeof(s))
386                         return -1;
387
388                 snprintf(s, sizeof(s), "%.*s", size, p);
389                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
390                         return -1;
391                 for (i = 0; i < _NUM_FLD; i++) {
392                         errno = 0;
393                         int_fld[i] = strtoul(str_fld[i], &end, 0);
394                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
395                                 return -1;
396                 }
397                 port_id = (portid_t)int_fld[FLD_PORT];
398                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
399                         port_id == (portid_t)RTE_PORT_ALL) {
400                         printf("Valid port range is [0");
401                         RTE_ETH_FOREACH_DEV(pid)
402                                 printf(", %d", pid);
403                         printf("]\n");
404                         return -1;
405                 }
406                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
407                 if (new_socket_id(socket_id)) {
408                         print_invalid_socket_id_error();
409                         return -1;
410                 }
411                 port_numa[port_id] = socket_id;
412         }
413
414         return 0;
415 }
416
417 static int
418 parse_ringnuma_config(const char *q_arg)
419 {
420         char s[256];
421         const char *p, *p0 = q_arg;
422         char *end;
423         uint8_t i, ring_flag, socket_id;
424         portid_t port_id;
425         unsigned size;
426         enum fieldnames {
427                 FLD_PORT = 0,
428                 FLD_FLAG,
429                 FLD_SOCKET,
430                 _NUM_FLD
431         };
432         unsigned long int_fld[_NUM_FLD];
433         char *str_fld[_NUM_FLD];
434         portid_t pid;
435         #define RX_RING_ONLY 0x1
436         #define TX_RING_ONLY 0x2
437         #define RXTX_RING    0x3
438
439         /* reset from value set at definition */
440         while ((p = strchr(p0,'(')) != NULL) {
441                 ++p;
442                 if((p0 = strchr(p,')')) == NULL)
443                         return -1;
444
445                 size = p0 - p;
446                 if(size >= sizeof(s))
447                         return -1;
448
449                 snprintf(s, sizeof(s), "%.*s", size, p);
450                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
451                         return -1;
452                 for (i = 0; i < _NUM_FLD; i++) {
453                         errno = 0;
454                         int_fld[i] = strtoul(str_fld[i], &end, 0);
455                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
456                                 return -1;
457                 }
458                 port_id = (portid_t)int_fld[FLD_PORT];
459                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
460                         port_id == (portid_t)RTE_PORT_ALL) {
461                         printf("Valid port range is [0");
462                         RTE_ETH_FOREACH_DEV(pid)
463                                 printf(", %d", pid);
464                         printf("]\n");
465                         return -1;
466                 }
467                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
468                 if (new_socket_id(socket_id)) {
469                         print_invalid_socket_id_error();
470                         return -1;
471                 }
472                 ring_flag = (uint8_t)int_fld[FLD_FLAG];
473                 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
474                         printf("Invalid ring-flag=%d config for port =%d\n",
475                                 ring_flag,port_id);
476                         return -1;
477                 }
478
479                 switch (ring_flag & RXTX_RING) {
480                 case RX_RING_ONLY:
481                         rxring_numa[port_id] = socket_id;
482                         break;
483                 case TX_RING_ONLY:
484                         txring_numa[port_id] = socket_id;
485                         break;
486                 case RXTX_RING:
487                         rxring_numa[port_id] = socket_id;
488                         txring_numa[port_id] = socket_id;
489                         break;
490                 default:
491                         printf("Invalid ring-flag=%d config for port=%d\n",
492                                 ring_flag,port_id);
493                         break;
494                 }
495         }
496
497         return 0;
498 }
499
500 static int
501 parse_event_printing_config(const char *optarg, int enable)
502 {
503         uint32_t mask = 0;
504
505         if (!strcmp(optarg, "unknown"))
506                 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
507         else if (!strcmp(optarg, "intr_lsc"))
508                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
509         else if (!strcmp(optarg, "queue_state"))
510                 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
511         else if (!strcmp(optarg, "intr_reset"))
512                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
513         else if (!strcmp(optarg, "vf_mbox"))
514                 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
515         else if (!strcmp(optarg, "macsec"))
516                 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
517         else if (!strcmp(optarg, "intr_rmv"))
518                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
519         else if (!strcmp(optarg, "all"))
520                 mask = ~UINT32_C(0);
521         else {
522                 fprintf(stderr, "Invalid event: %s\n", optarg);
523                 return -1;
524         }
525         if (enable)
526                 event_print_mask |= mask;
527         else
528                 event_print_mask &= ~mask;
529         return 0;
530 }
531
532 void
533 launch_args_parse(int argc, char** argv)
534 {
535         int n, opt;
536         char **argvopt;
537         int opt_idx;
538         enum { TX, RX };
539         /* Default offloads for all ports. */
540         uint64_t rx_offloads = rx_mode.offloads;
541         uint64_t tx_offloads = tx_mode.offloads;
542
543         static struct option lgopts[] = {
544                 { "help",                       0, 0, 0 },
545 #ifdef RTE_LIBRTE_CMDLINE
546                 { "interactive",                0, 0, 0 },
547                 { "cmdline-file",               1, 0, 0 },
548                 { "auto-start",                 0, 0, 0 },
549                 { "eth-peers-configfile",       1, 0, 0 },
550                 { "eth-peer",                   1, 0, 0 },
551 #endif
552                 { "tx-first",                   0, 0, 0 },
553                 { "stats-period",               1, 0, 0 },
554                 { "ports",                      1, 0, 0 },
555                 { "nb-cores",                   1, 0, 0 },
556                 { "nb-ports",                   1, 0, 0 },
557                 { "coremask",                   1, 0, 0 },
558                 { "portmask",                   1, 0, 0 },
559                 { "numa",                       0, 0, 0 },
560                 { "no-numa",                    0, 0, 0 },
561                 { "mp-anon",                    0, 0, 0 },
562                 { "port-numa-config",           1, 0, 0 },
563                 { "ring-numa-config",           1, 0, 0 },
564                 { "socket-num",                 1, 0, 0 },
565                 { "mbuf-size",                  1, 0, 0 },
566                 { "total-num-mbufs",            1, 0, 0 },
567                 { "max-pkt-len",                1, 0, 0 },
568                 { "pkt-filter-mode",            1, 0, 0 },
569                 { "pkt-filter-report-hash",     1, 0, 0 },
570                 { "pkt-filter-size",            1, 0, 0 },
571                 { "pkt-filter-drop-queue",      1, 0, 0 },
572 #ifdef RTE_LIBRTE_LATENCY_STATS
573                 { "latencystats",               1, 0, 0 },
574 #endif
575 #ifdef RTE_LIBRTE_BITRATE
576                 { "bitrate-stats",              1, 0, 0 },
577 #endif
578                 { "disable-crc-strip",          0, 0, 0 },
579                 { "enable-lro",                 0, 0, 0 },
580                 { "enable-rx-cksum",            0, 0, 0 },
581                 { "enable-rx-timestamp",        0, 0, 0 },
582                 { "enable-scatter",             0, 0, 0 },
583                 { "disable-hw-vlan",            0, 0, 0 },
584                 { "disable-hw-vlan-filter",     0, 0, 0 },
585                 { "disable-hw-vlan-strip",      0, 0, 0 },
586                 { "disable-hw-vlan-extend",     0, 0, 0 },
587                 { "enable-drop-en",            0, 0, 0 },
588                 { "disable-rss",                0, 0, 0 },
589                 { "port-topology",              1, 0, 0 },
590                 { "forward-mode",               1, 0, 0 },
591                 { "rss-ip",                     0, 0, 0 },
592                 { "rss-udp",                    0, 0, 0 },
593                 { "rxq",                        1, 0, 0 },
594                 { "txq",                        1, 0, 0 },
595                 { "rxd",                        1, 0, 0 },
596                 { "txd",                        1, 0, 0 },
597                 { "burst",                      1, 0, 0 },
598                 { "mbcache",                    1, 0, 0 },
599                 { "txpt",                       1, 0, 0 },
600                 { "txht",                       1, 0, 0 },
601                 { "txwt",                       1, 0, 0 },
602                 { "txfreet",                    1, 0, 0 },
603                 { "txrst",                      1, 0, 0 },
604                 { "rxpt",                       1, 0, 0 },
605                 { "rxht",                       1, 0, 0 },
606                 { "rxwt",                       1, 0, 0 },
607                 { "rxfreet",                    1, 0, 0 },
608                 { "tx-queue-stats-mapping",     1, 0, 0 },
609                 { "rx-queue-stats-mapping",     1, 0, 0 },
610                 { "no-flush-rx",        0, 0, 0 },
611                 { "flow-isolate-all",           0, 0, 0 },
612                 { "txpkts",                     1, 0, 0 },
613                 { "disable-link-check",         0, 0, 0 },
614                 { "no-lsc-interrupt",           0, 0, 0 },
615                 { "no-rmv-interrupt",           0, 0, 0 },
616                 { "print-event",                1, 0, 0 },
617                 { "mask-event",                 1, 0, 0 },
618                 { "tx-offloads",                1, 0, 0 },
619                 { 0, 0, 0, 0 },
620         };
621
622         argvopt = argv;
623
624 #ifdef RTE_LIBRTE_CMDLINE
625 #define SHORTOPTS "i"
626 #else
627 #define SHORTOPTS ""
628 #endif
629         while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
630                                  lgopts, &opt_idx)) != EOF) {
631                 switch (opt) {
632 #ifdef RTE_LIBRTE_CMDLINE
633                 case 'i':
634                         printf("Interactive-mode selected\n");
635                         interactive = 1;
636                         break;
637 #endif
638                 case 'a':
639                         printf("Auto-start selected\n");
640                         auto_start = 1;
641                         break;
642
643                 case 0: /*long options */
644                         if (!strcmp(lgopts[opt_idx].name, "help")) {
645                                 usage(argv[0]);
646                                 rte_exit(EXIT_SUCCESS, "Displayed help\n");
647                         }
648 #ifdef RTE_LIBRTE_CMDLINE
649                         if (!strcmp(lgopts[opt_idx].name, "interactive")) {
650                                 printf("Interactive-mode selected\n");
651                                 interactive = 1;
652                         }
653                         if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
654                                 printf("CLI commands to be read from %s\n",
655                                        optarg);
656                                 snprintf(cmdline_filename,
657                                          sizeof(cmdline_filename), "%s",
658                                          optarg);
659                         }
660                         if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
661                                 printf("Auto-start selected\n");
662                                 auto_start = 1;
663                         }
664                         if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
665                                 printf("Ports to start sending a burst of "
666                                                 "packets first\n");
667                                 tx_first = 1;
668                         }
669                         if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
670                                 char *end = NULL;
671                                 unsigned int n;
672
673                                 n = strtoul(optarg, &end, 10);
674                                 if ((optarg[0] == '\0') || (end == NULL) ||
675                                                 (*end != '\0'))
676                                         break;
677
678                                 stats_period = n;
679                                 break;
680                         }
681                         if (!strcmp(lgopts[opt_idx].name,
682                                     "eth-peers-configfile")) {
683                                 if (init_peer_eth_addrs(optarg) != 0)
684                                         rte_exit(EXIT_FAILURE,
685                                                  "Cannot open logfile\n");
686                         }
687                         if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
688                                 char *port_end;
689                                 uint8_t c, peer_addr[6];
690
691                                 errno = 0;
692                                 n = strtoul(optarg, &port_end, 10);
693                                 if (errno != 0 || port_end == optarg || *port_end++ != ',')
694                                         rte_exit(EXIT_FAILURE,
695                                                  "Invalid eth-peer: %s", optarg);
696                                 if (n >= RTE_MAX_ETHPORTS)
697                                         rte_exit(EXIT_FAILURE,
698                                                  "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
699                                                  n, RTE_MAX_ETHPORTS);
700
701                                 if (cmdline_parse_etheraddr(NULL, port_end,
702                                                 &peer_addr, sizeof(peer_addr)) < 0)
703                                         rte_exit(EXIT_FAILURE,
704                                                  "Invalid ethernet address: %s\n",
705                                                  port_end);
706                                 for (c = 0; c < 6; c++)
707                                         peer_eth_addrs[n].addr_bytes[c] =
708                                                 peer_addr[c];
709                                 nb_peer_eth_addrs++;
710                         }
711 #endif
712                         if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
713                                 n = atoi(optarg);
714                                 if (n > 0 && n <= nb_ports)
715                                         nb_fwd_ports = n;
716                                 else
717                                         rte_exit(EXIT_FAILURE,
718                                                  "Invalid port %d\n", n);
719                         }
720                         if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
721                                 n = atoi(optarg);
722                                 if (n > 0 && n <= nb_lcores)
723                                         nb_fwd_lcores = (uint8_t) n;
724                                 else
725                                         rte_exit(EXIT_FAILURE,
726                                                  "nb-cores should be > 0 and <= %d\n",
727                                                  nb_lcores);
728                         }
729                         if (!strcmp(lgopts[opt_idx].name, "coremask"))
730                                 parse_fwd_coremask(optarg);
731                         if (!strcmp(lgopts[opt_idx].name, "portmask"))
732                                 parse_fwd_portmask(optarg);
733                         if (!strcmp(lgopts[opt_idx].name, "no-numa"))
734                                 numa_support = 0;
735                         if (!strcmp(lgopts[opt_idx].name, "numa"))
736                                 numa_support = 1;
737                         if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
738                                 mp_anon = 1;
739                         }
740                         if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
741                                 if (parse_portnuma_config(optarg))
742                                         rte_exit(EXIT_FAILURE,
743                                            "invalid port-numa configuration\n");
744                         }
745                         if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
746                                 if (parse_ringnuma_config(optarg))
747                                         rte_exit(EXIT_FAILURE,
748                                            "invalid ring-numa configuration\n");
749                         if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
750                                 n = atoi(optarg);
751                                 if (!new_socket_id((uint8_t)n)) {
752                                         socket_num = (uint8_t)n;
753                                 } else {
754                                         print_invalid_socket_id_error();
755                                         rte_exit(EXIT_FAILURE,
756                                                 "Invalid socket id");
757                                 }
758                         }
759                         if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
760                                 n = atoi(optarg);
761                                 if (n > 0 && n <= 0xFFFF)
762                                         mbuf_data_size = (uint16_t) n;
763                                 else
764                                         rte_exit(EXIT_FAILURE,
765                                                  "mbuf-size should be > 0 and < 65536\n");
766                         }
767                         if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
768                                 n = atoi(optarg);
769                                 if (n > 1024)
770                                         param_total_num_mbufs = (unsigned)n;
771                                 else
772                                         rte_exit(EXIT_FAILURE,
773                                                  "total-num-mbufs should be > 1024\n");
774                         }
775                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
776                                 n = atoi(optarg);
777                                 if (n >= ETHER_MIN_LEN) {
778                                         rx_mode.max_rx_pkt_len = (uint32_t) n;
779                                         if (n > ETHER_MAX_LEN)
780                                                 rx_offloads |=
781                                                         DEV_RX_OFFLOAD_JUMBO_FRAME;
782                                 } else
783                                         rte_exit(EXIT_FAILURE,
784                                                  "Invalid max-pkt-len=%d - should be > %d\n",
785                                                  n, ETHER_MIN_LEN);
786                         }
787                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
788                                 if (!strcmp(optarg, "signature"))
789                                         fdir_conf.mode =
790                                                 RTE_FDIR_MODE_SIGNATURE;
791                                 else if (!strcmp(optarg, "perfect"))
792                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
793                                 else if (!strcmp(optarg, "perfect-mac-vlan"))
794                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
795                                 else if (!strcmp(optarg, "perfect-tunnel"))
796                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
797                                 else if (!strcmp(optarg, "none"))
798                                         fdir_conf.mode = RTE_FDIR_MODE_NONE;
799                                 else
800                                         rte_exit(EXIT_FAILURE,
801                                                  "pkt-mode-invalid %s invalid - must be: "
802                                                  "none, signature, perfect, perfect-mac-vlan"
803                                                  " or perfect-tunnel\n",
804                                                  optarg);
805                         }
806                         if (!strcmp(lgopts[opt_idx].name,
807                                     "pkt-filter-report-hash")) {
808                                 if (!strcmp(optarg, "none"))
809                                         fdir_conf.status =
810                                                 RTE_FDIR_NO_REPORT_STATUS;
811                                 else if (!strcmp(optarg, "match"))
812                                         fdir_conf.status =
813                                                 RTE_FDIR_REPORT_STATUS;
814                                 else if (!strcmp(optarg, "always"))
815                                         fdir_conf.status =
816                                                 RTE_FDIR_REPORT_STATUS_ALWAYS;
817                                 else
818                                         rte_exit(EXIT_FAILURE,
819                                                  "pkt-filter-report-hash %s invalid "
820                                                  "- must be: none or match or always\n",
821                                                  optarg);
822                         }
823                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
824                                 if (!strcmp(optarg, "64K"))
825                                         fdir_conf.pballoc =
826                                                 RTE_FDIR_PBALLOC_64K;
827                                 else if (!strcmp(optarg, "128K"))
828                                         fdir_conf.pballoc =
829                                                 RTE_FDIR_PBALLOC_128K;
830                                 else if (!strcmp(optarg, "256K"))
831                                         fdir_conf.pballoc =
832                                                 RTE_FDIR_PBALLOC_256K;
833                                 else
834                                         rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
835                                                  " must be: 64K or 128K or 256K\n",
836                                                  optarg);
837                         }
838                         if (!strcmp(lgopts[opt_idx].name,
839                                     "pkt-filter-drop-queue")) {
840                                 n = atoi(optarg);
841                                 if (n >= 0)
842                                         fdir_conf.drop_queue = (uint8_t) n;
843                                 else
844                                         rte_exit(EXIT_FAILURE,
845                                                  "drop queue %d invalid - must"
846                                                  "be >= 0 \n", n);
847                         }
848 #ifdef RTE_LIBRTE_LATENCY_STATS
849                         if (!strcmp(lgopts[opt_idx].name,
850                                     "latencystats")) {
851                                 n = atoi(optarg);
852                                 if (n >= 0) {
853                                         latencystats_lcore_id = (lcoreid_t) n;
854                                         latencystats_enabled = 1;
855                                 } else
856                                         rte_exit(EXIT_FAILURE,
857                                                  "invalid lcore id %d for latencystats"
858                                                  " must be >= 0\n", n);
859                         }
860 #endif
861 #ifdef RTE_LIBRTE_BITRATE
862                         if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
863                                 n = atoi(optarg);
864                                 if (n >= 0) {
865                                         bitrate_lcore_id = (lcoreid_t) n;
866                                         bitrate_enabled = 1;
867                                 } else
868                                         rte_exit(EXIT_FAILURE,
869                                                  "invalid lcore id %d for bitrate stats"
870                                                  " must be >= 0\n", n);
871                         }
872 #endif
873                         if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
874                                 rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
875                         if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
876                                 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
877                         if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
878                                 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
879                         if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
880                                 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
881                         if (!strcmp(lgopts[opt_idx].name,
882                                         "enable-rx-timestamp"))
883                                 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
884                         if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan"))
885                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN;
886
887                         if (!strcmp(lgopts[opt_idx].name,
888                                         "disable-hw-vlan-filter"))
889                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
890
891                         if (!strcmp(lgopts[opt_idx].name,
892                                         "disable-hw-vlan-strip"))
893                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
894
895                         if (!strcmp(lgopts[opt_idx].name,
896                                         "disable-hw-vlan-extend"))
897                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
898
899                         if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
900                                 rx_drop_en = 1;
901
902                         if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
903                                 rss_hf = 0;
904                         if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
905                                 if (!strcmp(optarg, "paired"))
906                                         port_topology = PORT_TOPOLOGY_PAIRED;
907                                 else if (!strcmp(optarg, "chained"))
908                                         port_topology = PORT_TOPOLOGY_CHAINED;
909                                 else if (!strcmp(optarg, "loop"))
910                                         port_topology = PORT_TOPOLOGY_LOOP;
911                                 else
912                                         rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
913                                                  " must be: paired, chained or loop\n",
914                                                  optarg);
915                         }
916                         if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
917                                 set_pkt_forwarding_mode(optarg);
918                         if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
919                                 rss_hf = ETH_RSS_IP;
920                         if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
921                                 rss_hf = ETH_RSS_UDP;
922                         if (!strcmp(lgopts[opt_idx].name, "rxq")) {
923                                 n = atoi(optarg);
924                                 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
925                                         nb_rxq = (queueid_t) n;
926                                 else
927                                         rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
928                                                   " >= 0 && <= %d\n", n,
929                                                   (int) MAX_QUEUE_ID);
930                         }
931                         if (!strcmp(lgopts[opt_idx].name, "txq")) {
932                                 n = atoi(optarg);
933                                 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
934                                         nb_txq = (queueid_t) n;
935                                 else
936                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
937                                                   " >= 0 && <= %d\n", n,
938                                                   (int) MAX_QUEUE_ID);
939                         }
940                         if (!nb_rxq && !nb_txq) {
941                                 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
942                                                 "be non-zero\n");
943                         }
944                         if (!strcmp(lgopts[opt_idx].name, "burst")) {
945                                 n = atoi(optarg);
946                                 if ((n >= 1) && (n <= MAX_PKT_BURST))
947                                         nb_pkt_per_burst = (uint16_t) n;
948                                 else
949                                         rte_exit(EXIT_FAILURE,
950                                                  "burst must >= 1 and <= %d]",
951                                                  MAX_PKT_BURST);
952                         }
953                         if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
954                                 n = atoi(optarg);
955                                 if ((n >= 0) &&
956                                     (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
957                                         mb_mempool_cache = (uint16_t) n;
958                                 else
959                                         rte_exit(EXIT_FAILURE,
960                                                  "mbcache must be >= 0 and <= %d\n",
961                                                  RTE_MEMPOOL_CACHE_MAX_SIZE);
962                         }
963                         if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
964                                 n = atoi(optarg);
965                                 if (n >= 0)
966                                         tx_free_thresh = (int16_t)n;
967                                 else
968                                         rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
969                         }
970                         if (!strcmp(lgopts[opt_idx].name, "txrst")) {
971                                 n = atoi(optarg);
972                                 if (n >= 0)
973                                         tx_rs_thresh = (int16_t)n;
974                                 else
975                                         rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
976                         }
977                         if (!strcmp(lgopts[opt_idx].name, "rxd")) {
978                                 n = atoi(optarg);
979                                 if (n > 0) {
980                                         if (rx_free_thresh >= n)
981                                                 rte_exit(EXIT_FAILURE,
982                                                          "rxd must be > "
983                                                          "rx_free_thresh(%d)\n",
984                                                          (int)rx_free_thresh);
985                                         else
986                                                 nb_rxd = (uint16_t) n;
987                                 } else
988                                         rte_exit(EXIT_FAILURE,
989                                                  "rxd(%d) invalid - must be > 0\n",
990                                                  n);
991                         }
992                         if (!strcmp(lgopts[opt_idx].name, "txd")) {
993                                 n = atoi(optarg);
994                                 if (n > 0)
995                                         nb_txd = (uint16_t) n;
996                                 else
997                                         rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
998                         }
999                         if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1000                                 n = atoi(optarg);
1001                                 if (n >= 0)
1002                                         tx_pthresh = (int8_t)n;
1003                                 else
1004                                         rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1005                         }
1006                         if (!strcmp(lgopts[opt_idx].name, "txht")) {
1007                                 n = atoi(optarg);
1008                                 if (n >= 0)
1009                                         tx_hthresh = (int8_t)n;
1010                                 else
1011                                         rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1012                         }
1013                         if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1014                                 n = atoi(optarg);
1015                                 if (n >= 0)
1016                                         tx_wthresh = (int8_t)n;
1017                                 else
1018                                         rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1019                         }
1020                         if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1021                                 n = atoi(optarg);
1022                                 if (n >= 0)
1023                                         rx_pthresh = (int8_t)n;
1024                                 else
1025                                         rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1026                         }
1027                         if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1028                                 n = atoi(optarg);
1029                                 if (n >= 0)
1030                                         rx_hthresh = (int8_t)n;
1031                                 else
1032                                         rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1033                         }
1034                         if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1035                                 n = atoi(optarg);
1036                                 if (n >= 0)
1037                                         rx_wthresh = (int8_t)n;
1038                                 else
1039                                         rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1040                         }
1041                         if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1042                                 n = atoi(optarg);
1043                                 if (n >= 0)
1044                                         rx_free_thresh = (int16_t)n;
1045                                 else
1046                                         rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1047                         }
1048                         if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
1049                                 if (parse_queue_stats_mapping_config(optarg, TX)) {
1050                                         rte_exit(EXIT_FAILURE,
1051                                                  "invalid TX queue statistics mapping config entered\n");
1052                                 }
1053                         }
1054                         if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
1055                                 if (parse_queue_stats_mapping_config(optarg, RX)) {
1056                                         rte_exit(EXIT_FAILURE,
1057                                                  "invalid RX queue statistics mapping config entered\n");
1058                                 }
1059                         }
1060                         if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1061                                 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1062                                 unsigned int nb_segs;
1063
1064                                 nb_segs = parse_item_list(optarg, "txpkt segments",
1065                                                 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1066                                 if (nb_segs > 0)
1067                                         set_tx_pkt_segments(seg_lengths, nb_segs);
1068                                 else
1069                                         rte_exit(EXIT_FAILURE, "bad txpkts\n");
1070                         }
1071                         if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1072                                 no_flush_rx = 1;
1073                         if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1074                                 no_link_check = 1;
1075                         if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1076                                 lsc_interrupt = 0;
1077                         if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1078                                 rmv_interrupt = 0;
1079                         if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1080                                 flow_isolate_all = 1;
1081                         if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1082                                 char *end = NULL;
1083                                 n = strtoull(optarg, &end, 16);
1084                                 if (n >= 0)
1085                                         tx_offloads = (uint64_t)n;
1086                                 else
1087                                         rte_exit(EXIT_FAILURE,
1088                                                  "tx-offloads must be >= 0\n");
1089                         }
1090                         if (!strcmp(lgopts[opt_idx].name, "print-event"))
1091                                 if (parse_event_printing_config(optarg, 1)) {
1092                                         rte_exit(EXIT_FAILURE,
1093                                                  "invalid print-event argument\n");
1094                                 }
1095                         if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1096                                 if (parse_event_printing_config(optarg, 0)) {
1097                                         rte_exit(EXIT_FAILURE,
1098                                                  "invalid mask-event argument\n");
1099                                 }
1100
1101                         break;
1102                 case 'h':
1103                         usage(argv[0]);
1104                         rte_exit(EXIT_SUCCESS, "Displayed help\n");
1105                         break;
1106                 default:
1107                         usage(argv[0]);
1108                         rte_exit(EXIT_FAILURE,
1109                                  "Command line is incomplete or incorrect\n");
1110                         break;
1111                 }
1112         }
1113
1114         /* Set offload configuration from command line parameters. */
1115         rx_mode.offloads = rx_offloads;
1116         tx_mode.offloads = tx_offloads;
1117 }