app/testpmd: add command line option for Tx offloads
[dpdk.git] / app / test-pmd / parameters.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2010-2017 Intel Corporation
3  */
4
5 #include <errno.h>
6 #include <getopt.h>
7 #include <stdarg.h>
8 #include <stdio.h>
9 #include <stdlib.h>
10 #include <signal.h>
11 #include <string.h>
12 #include <time.h>
13 #include <fcntl.h>
14 #include <sys/types.h>
15
16 #include <sys/queue.h>
17 #include <sys/stat.h>
18
19 #include <stdint.h>
20 #include <unistd.h>
21 #include <inttypes.h>
22
23 #include <rte_common.h>
24 #include <rte_byteorder.h>
25 #include <rte_log.h>
26 #include <rte_debug.h>
27 #include <rte_cycles.h>
28 #include <rte_memory.h>
29 #include <rte_launch.h>
30 #include <rte_eal.h>
31 #include <rte_per_lcore.h>
32 #include <rte_lcore.h>
33 #include <rte_atomic.h>
34 #include <rte_branch_prediction.h>
35 #include <rte_mempool.h>
36 #include <rte_interrupts.h>
37 #include <rte_pci.h>
38 #include <rte_ether.h>
39 #include <rte_ethdev.h>
40 #include <rte_string_fns.h>
41 #ifdef RTE_LIBRTE_CMDLINE
42 #include <cmdline_parse.h>
43 #include <cmdline_parse_etheraddr.h>
44 #endif
45 #ifdef RTE_LIBRTE_PMD_BOND
46 #include <rte_eth_bond.h>
47 #endif
48 #include <rte_flow.h>
49
50 #include "testpmd.h"
51
52 static void
53 usage(char* progname)
54 {
55         printf("usage: %s "
56 #ifdef RTE_LIBRTE_CMDLINE
57                "[--interactive|-i] "
58                "[--cmdline-file=FILENAME] "
59 #endif
60                "[--help|-h] | [--auto-start|-a] | ["
61                "--tx-first | --stats-period=PERIOD | "
62                "--coremask=COREMASK --portmask=PORTMASK --numa "
63                "--mbuf-size= | --total-num-mbufs= | "
64                "--nb-cores= | --nb-ports= | "
65 #ifdef RTE_LIBRTE_CMDLINE
66                "--eth-peers-configfile= | "
67                "--eth-peer=X,M:M:M:M:M:M | "
68 #endif
69                "--pkt-filter-mode= |"
70                "--rss-ip | --rss-udp | "
71                "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
72                "--txpt= | --txht= | --txwt= | --txfreet= | "
73                "--txrst= | --txqflags= | --tx-offloads ]\n",
74                progname);
75 #ifdef RTE_LIBRTE_CMDLINE
76         printf("  --interactive: run in interactive mode.\n");
77         printf("  --cmdline-file: execute cli commands before startup.\n");
78 #endif
79         printf("  --auto-start: start forwarding on init "
80                "[always when non-interactive].\n");
81         printf("  --help: display this message and quit.\n");
82         printf("  --tx-first: start forwarding sending a burst first "
83                "(only if interactive is disabled).\n");
84         printf("  --stats-period=PERIOD: statistics will be shown "
85                "every PERIOD seconds (only if interactive is disabled).\n");
86         printf("  --nb-cores=N: set the number of forwarding cores "
87                "(1 <= N <= %d).\n", nb_lcores);
88         printf("  --nb-ports=N: set the number of forwarding ports "
89                "(1 <= N <= %d).\n", nb_ports);
90         printf("  --coremask=COREMASK: hexadecimal bitmask of cores running "
91                "the packet forwarding test. The master lcore is reserved for "
92                "command line parsing only, and cannot be masked on for "
93                "packet forwarding.\n");
94         printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
95                "by the packet forwarding test.\n");
96         printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
97                "RX memory buffers (mbufs).\n");
98         printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
99                "specify the socket on which the memory pool "
100                "used by the port will be allocated.\n");
101         printf("  --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
102                "specify the socket on which the TX/RX rings for "
103                "the port will be allocated "
104                "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
105         printf("  --socket-num=N: set socket from which all memory is allocated "
106                "in NUMA mode.\n");
107         printf("  --mbuf-size=N: set the data size of mbuf to N bytes.\n");
108         printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
109                "in mbuf pools.\n");
110         printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
111 #ifdef RTE_LIBRTE_CMDLINE
112         printf("  --eth-peers-configfile=name: config file with ethernet addresses "
113                "of peer ports.\n");
114         printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
115                "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
116 #endif
117         printf("  --pkt-filter-mode=N: set Flow Director mode "
118                "(N: none (default mode) or signature or perfect).\n");
119         printf("  --pkt-filter-report-hash=N: set Flow Director report mode "
120                "(N: none  or match (default) or always).\n");
121         printf("  --pkt-filter-size=N: set Flow Director mode "
122                "(N: 64K (default mode) or 128K or 256K).\n");
123         printf("  --pkt-filter-drop-queue=N: set drop-queue. "
124                "In perfect mode, when you add a rule with queue = -1 "
125                "the packet will be enqueued into the rx drop-queue. "
126                "If the drop-queue doesn't exist, the packet is dropped. "
127                "By default drop-queue=127.\n");
128 #ifdef RTE_LIBRTE_LATENCY_STATS
129         printf("  --latencystats=N: enable latency and jitter statistcs "
130                "monitoring on forwarding lcore id N.\n");
131 #endif
132         printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
133         printf("  --enable-lro: enable large receive offload.\n");
134         printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
135         printf("  --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
136         printf("  --disable-hw-vlan: disable hardware vlan.\n");
137         printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
138         printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
139         printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
140         printf("  --enable-drop-en: enable per queue packet drop.\n");
141         printf("  --disable-rss: disable rss.\n");
142         printf("  --port-topology=N: set port topology (N: paired (default) or "
143                "chained).\n");
144         printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
145                list_pkt_forwarding_modes());
146         printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
147         printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
148         printf("  --rxq=N: set the number of RX queues per port to N.\n");
149         printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
150         printf("  --txq=N: set the number of TX queues per port to N.\n");
151         printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
152         printf("  --burst=N: set the number of packets per burst to N.\n");
153         printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
154         printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
155         printf("  --rxht=N: set the host threshold register of RX rings to N.\n");
156         printf("  --rxfreet=N: set the free threshold of RX descriptors to N "
157                "(0 <= N < value of rxd).\n");
158         printf("  --rxwt=N: set the write-back threshold register of RX rings to N.\n");
159         printf("  --txpt=N: set the prefetch threshold register of TX rings to N.\n");
160         printf("  --txht=N: set the nhost threshold register of TX rings to N.\n");
161         printf("  --txwt=N: set the write-back threshold register of TX rings to N.\n");
162         printf("  --txfreet=N: set the transmit free threshold of TX rings to N "
163                "(0 <= N <= value of txd).\n");
164         printf("  --txrst=N: set the transmit RS bit threshold of TX rings to N "
165                "(0 <= N <= value of txd).\n");
166         printf("  --txqflags=0xXXXXXXXX: hexadecimal bitmask of TX queue flags "
167                "(0 <= N <= 0x7FFFFFFF).\n");
168         printf("  --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
169                "tx queues statistics counters mapping "
170                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
171         printf("  --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
172                "rx queues statistics counters mapping "
173                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
174         printf("  --no-flush-rx: Don't flush RX streams before forwarding."
175                " Used mainly with PCAP drivers.\n");
176         printf("  --txpkts=X[,Y]*: set TX segment sizes"
177                 " or total packet length.\n");
178         printf("  --disable-link-check: disable check on link status when "
179                "starting/stopping ports.\n");
180         printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
181         printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
182         printf("  --bitrate-stats=N: set the logical core N to perform "
183                 "bit-rate calculation.\n");
184         printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
185                "enable print of designated event or all of them.\n");
186         printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
187                "disable print of designated event or all of them.\n");
188         printf("  --flow-isolate-all: "
189                "requests flow API isolated mode on all ports at initialization time.\n");
190         printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
191 }
192
193 #ifdef RTE_LIBRTE_CMDLINE
194 static int
195 init_peer_eth_addrs(char *config_filename)
196 {
197         FILE *config_file;
198         portid_t i;
199         char buf[50];
200
201         config_file = fopen(config_filename, "r");
202         if (config_file == NULL) {
203                 perror("Failed to open eth config file\n");
204                 return -1;
205         }
206
207         for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
208
209                 if (fgets(buf, sizeof(buf), config_file) == NULL)
210                         break;
211
212                 if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i],
213                                 sizeof(peer_eth_addrs[i])) < 0) {
214                         printf("Bad MAC address format on line %d\n", i+1);
215                         fclose(config_file);
216                         return -1;
217                 }
218         }
219         fclose(config_file);
220         nb_peer_eth_addrs = (portid_t) i;
221         return 0;
222 }
223 #endif
224
225 /*
226  * Parse the coremask given as argument (hexadecimal string) and set
227  * the global configuration of forwarding cores.
228  */
229 static void
230 parse_fwd_coremask(const char *coremask)
231 {
232         char *end;
233         unsigned long long int cm;
234
235         /* parse hexadecimal string */
236         end = NULL;
237         cm = strtoull(coremask, &end, 16);
238         if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
239                 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
240         else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
241                 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
242 }
243
244 /*
245  * Parse the coremask given as argument (hexadecimal string) and set
246  * the global configuration of forwarding cores.
247  */
248 static void
249 parse_fwd_portmask(const char *portmask)
250 {
251         char *end;
252         unsigned long long int pm;
253
254         /* parse hexadecimal string */
255         end = NULL;
256         pm = strtoull(portmask, &end, 16);
257         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
258                 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
259         else
260                 set_fwd_ports_mask((uint64_t) pm);
261 }
262
263
264 static int
265 parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
266 {
267         char s[256];
268         const char *p, *p0 = q_arg;
269         char *end;
270         enum fieldnames {
271                 FLD_PORT = 0,
272                 FLD_QUEUE,
273                 FLD_STATS_COUNTER,
274                 _NUM_FLD
275         };
276         unsigned long int_fld[_NUM_FLD];
277         char *str_fld[_NUM_FLD];
278         int i;
279         unsigned size;
280
281         /* reset from value set at definition */
282         is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
283
284         while ((p = strchr(p0,'(')) != NULL) {
285                 ++p;
286                 if((p0 = strchr(p,')')) == NULL)
287                         return -1;
288
289                 size = p0 - p;
290                 if(size >= sizeof(s))
291                         return -1;
292
293                 snprintf(s, sizeof(s), "%.*s", size, p);
294                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
295                         return -1;
296                 for (i = 0; i < _NUM_FLD; i++){
297                         errno = 0;
298                         int_fld[i] = strtoul(str_fld[i], &end, 0);
299                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
300                                 return -1;
301                 }
302                 /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
303                 if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
304                         printf("Stats counter not in the correct range 0..%d\n",
305                                         RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
306                         return -1;
307                 }
308
309                 if (!is_rx) {
310                         if ((nb_tx_queue_stats_mappings >=
311                                                 MAX_TX_QUEUE_STATS_MAPPINGS)) {
312                                 printf("exceeded max number of TX queue "
313                                                 "statistics mappings: %hu\n",
314                                                 nb_tx_queue_stats_mappings);
315                                 return -1;
316                         }
317                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
318                                 (uint8_t)int_fld[FLD_PORT];
319                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
320                                 (uint8_t)int_fld[FLD_QUEUE];
321                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
322                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
323                         ++nb_tx_queue_stats_mappings;
324                 }
325                 else {
326                         if ((nb_rx_queue_stats_mappings >=
327                                                 MAX_RX_QUEUE_STATS_MAPPINGS)) {
328                                 printf("exceeded max number of RX queue "
329                                                 "statistics mappings: %hu\n",
330                                                 nb_rx_queue_stats_mappings);
331                                 return -1;
332                         }
333                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
334                                 (uint8_t)int_fld[FLD_PORT];
335                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
336                                 (uint8_t)int_fld[FLD_QUEUE];
337                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
338                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
339                         ++nb_rx_queue_stats_mappings;
340                 }
341
342         }
343 /* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
344 /* than to the default array (that was set at its definition) */
345         is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
346                 (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
347         return 0;
348 }
349
350 static void
351 print_invalid_socket_id_error(void)
352 {
353         unsigned int i = 0;
354
355         printf("Invalid socket id, options are: ");
356         for (i = 0; i < num_sockets; i++) {
357                 printf("%u%s", socket_ids[i],
358                       (i == num_sockets - 1) ? "\n" : ",");
359         }
360 }
361
362 static int
363 parse_portnuma_config(const char *q_arg)
364 {
365         char s[256];
366         const char *p, *p0 = q_arg;
367         char *end;
368         uint8_t i, socket_id;
369         portid_t port_id;
370         unsigned size;
371         enum fieldnames {
372                 FLD_PORT = 0,
373                 FLD_SOCKET,
374                 _NUM_FLD
375         };
376         unsigned long int_fld[_NUM_FLD];
377         char *str_fld[_NUM_FLD];
378         portid_t pid;
379
380         /* reset from value set at definition */
381         while ((p = strchr(p0,'(')) != NULL) {
382                 ++p;
383                 if((p0 = strchr(p,')')) == NULL)
384                         return -1;
385
386                 size = p0 - p;
387                 if(size >= sizeof(s))
388                         return -1;
389
390                 snprintf(s, sizeof(s), "%.*s", size, p);
391                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
392                         return -1;
393                 for (i = 0; i < _NUM_FLD; i++) {
394                         errno = 0;
395                         int_fld[i] = strtoul(str_fld[i], &end, 0);
396                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
397                                 return -1;
398                 }
399                 port_id = (portid_t)int_fld[FLD_PORT];
400                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
401                         port_id == (portid_t)RTE_PORT_ALL) {
402                         printf("Valid port range is [0");
403                         RTE_ETH_FOREACH_DEV(pid)
404                                 printf(", %d", pid);
405                         printf("]\n");
406                         return -1;
407                 }
408                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
409                 if (new_socket_id(socket_id)) {
410                         print_invalid_socket_id_error();
411                         return -1;
412                 }
413                 port_numa[port_id] = socket_id;
414         }
415
416         return 0;
417 }
418
419 static int
420 parse_ringnuma_config(const char *q_arg)
421 {
422         char s[256];
423         const char *p, *p0 = q_arg;
424         char *end;
425         uint8_t i, ring_flag, socket_id;
426         portid_t port_id;
427         unsigned size;
428         enum fieldnames {
429                 FLD_PORT = 0,
430                 FLD_FLAG,
431                 FLD_SOCKET,
432                 _NUM_FLD
433         };
434         unsigned long int_fld[_NUM_FLD];
435         char *str_fld[_NUM_FLD];
436         portid_t pid;
437         #define RX_RING_ONLY 0x1
438         #define TX_RING_ONLY 0x2
439         #define RXTX_RING    0x3
440
441         /* reset from value set at definition */
442         while ((p = strchr(p0,'(')) != NULL) {
443                 ++p;
444                 if((p0 = strchr(p,')')) == NULL)
445                         return -1;
446
447                 size = p0 - p;
448                 if(size >= sizeof(s))
449                         return -1;
450
451                 snprintf(s, sizeof(s), "%.*s", size, p);
452                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
453                         return -1;
454                 for (i = 0; i < _NUM_FLD; i++) {
455                         errno = 0;
456                         int_fld[i] = strtoul(str_fld[i], &end, 0);
457                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
458                                 return -1;
459                 }
460                 port_id = (portid_t)int_fld[FLD_PORT];
461                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
462                         port_id == (portid_t)RTE_PORT_ALL) {
463                         printf("Valid port range is [0");
464                         RTE_ETH_FOREACH_DEV(pid)
465                                 printf(", %d", pid);
466                         printf("]\n");
467                         return -1;
468                 }
469                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
470                 if (new_socket_id(socket_id)) {
471                         print_invalid_socket_id_error();
472                         return -1;
473                 }
474                 ring_flag = (uint8_t)int_fld[FLD_FLAG];
475                 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
476                         printf("Invalid ring-flag=%d config for port =%d\n",
477                                 ring_flag,port_id);
478                         return -1;
479                 }
480
481                 switch (ring_flag & RXTX_RING) {
482                 case RX_RING_ONLY:
483                         rxring_numa[port_id] = socket_id;
484                         break;
485                 case TX_RING_ONLY:
486                         txring_numa[port_id] = socket_id;
487                         break;
488                 case RXTX_RING:
489                         rxring_numa[port_id] = socket_id;
490                         txring_numa[port_id] = socket_id;
491                         break;
492                 default:
493                         printf("Invalid ring-flag=%d config for port=%d\n",
494                                 ring_flag,port_id);
495                         break;
496                 }
497         }
498
499         return 0;
500 }
501
502 static int
503 parse_event_printing_config(const char *optarg, int enable)
504 {
505         uint32_t mask = 0;
506
507         if (!strcmp(optarg, "unknown"))
508                 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
509         else if (!strcmp(optarg, "intr_lsc"))
510                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
511         else if (!strcmp(optarg, "queue_state"))
512                 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
513         else if (!strcmp(optarg, "intr_reset"))
514                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
515         else if (!strcmp(optarg, "vf_mbox"))
516                 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
517         else if (!strcmp(optarg, "macsec"))
518                 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
519         else if (!strcmp(optarg, "intr_rmv"))
520                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
521         else if (!strcmp(optarg, "all"))
522                 mask = ~UINT32_C(0);
523         else {
524                 fprintf(stderr, "Invalid event: %s\n", optarg);
525                 return -1;
526         }
527         if (enable)
528                 event_print_mask |= mask;
529         else
530                 event_print_mask &= ~mask;
531         return 0;
532 }
533
534 void
535 launch_args_parse(int argc, char** argv)
536 {
537         int n, opt;
538         char **argvopt;
539         int opt_idx;
540         enum { TX, RX };
541         /* Default offloads for all ports. */
542         uint64_t rx_offloads = rx_mode.offloads;
543         uint64_t tx_offloads = tx_mode.offloads;
544
545         static struct option lgopts[] = {
546                 { "help",                       0, 0, 0 },
547 #ifdef RTE_LIBRTE_CMDLINE
548                 { "interactive",                0, 0, 0 },
549                 { "cmdline-file",               1, 0, 0 },
550                 { "auto-start",                 0, 0, 0 },
551                 { "eth-peers-configfile",       1, 0, 0 },
552                 { "eth-peer",                   1, 0, 0 },
553 #endif
554                 { "tx-first",                   0, 0, 0 },
555                 { "stats-period",               1, 0, 0 },
556                 { "ports",                      1, 0, 0 },
557                 { "nb-cores",                   1, 0, 0 },
558                 { "nb-ports",                   1, 0, 0 },
559                 { "coremask",                   1, 0, 0 },
560                 { "portmask",                   1, 0, 0 },
561                 { "numa",                       0, 0, 0 },
562                 { "no-numa",                    0, 0, 0 },
563                 { "mp-anon",                    0, 0, 0 },
564                 { "port-numa-config",           1, 0, 0 },
565                 { "ring-numa-config",           1, 0, 0 },
566                 { "socket-num",                 1, 0, 0 },
567                 { "mbuf-size",                  1, 0, 0 },
568                 { "total-num-mbufs",            1, 0, 0 },
569                 { "max-pkt-len",                1, 0, 0 },
570                 { "pkt-filter-mode",            1, 0, 0 },
571                 { "pkt-filter-report-hash",     1, 0, 0 },
572                 { "pkt-filter-size",            1, 0, 0 },
573                 { "pkt-filter-drop-queue",      1, 0, 0 },
574 #ifdef RTE_LIBRTE_LATENCY_STATS
575                 { "latencystats",               1, 0, 0 },
576 #endif
577 #ifdef RTE_LIBRTE_BITRATE
578                 { "bitrate-stats",              1, 0, 0 },
579 #endif
580                 { "disable-crc-strip",          0, 0, 0 },
581                 { "enable-lro",                 0, 0, 0 },
582                 { "enable-rx-cksum",            0, 0, 0 },
583                 { "enable-rx-timestamp",        0, 0, 0 },
584                 { "enable-scatter",             0, 0, 0 },
585                 { "disable-hw-vlan",            0, 0, 0 },
586                 { "disable-hw-vlan-filter",     0, 0, 0 },
587                 { "disable-hw-vlan-strip",      0, 0, 0 },
588                 { "disable-hw-vlan-extend",     0, 0, 0 },
589                 { "enable-drop-en",            0, 0, 0 },
590                 { "disable-rss",                0, 0, 0 },
591                 { "port-topology",              1, 0, 0 },
592                 { "forward-mode",               1, 0, 0 },
593                 { "rss-ip",                     0, 0, 0 },
594                 { "rss-udp",                    0, 0, 0 },
595                 { "rxq",                        1, 0, 0 },
596                 { "txq",                        1, 0, 0 },
597                 { "rxd",                        1, 0, 0 },
598                 { "txd",                        1, 0, 0 },
599                 { "burst",                      1, 0, 0 },
600                 { "mbcache",                    1, 0, 0 },
601                 { "txpt",                       1, 0, 0 },
602                 { "txht",                       1, 0, 0 },
603                 { "txwt",                       1, 0, 0 },
604                 { "txfreet",                    1, 0, 0 },
605                 { "txrst",                      1, 0, 0 },
606                 { "txqflags",                   1, 0, 0 },
607                 { "rxpt",                       1, 0, 0 },
608                 { "rxht",                       1, 0, 0 },
609                 { "rxwt",                       1, 0, 0 },
610                 { "rxfreet",                    1, 0, 0 },
611                 { "tx-queue-stats-mapping",     1, 0, 0 },
612                 { "rx-queue-stats-mapping",     1, 0, 0 },
613                 { "no-flush-rx",        0, 0, 0 },
614                 { "flow-isolate-all",           0, 0, 0 },
615                 { "txpkts",                     1, 0, 0 },
616                 { "disable-link-check",         0, 0, 0 },
617                 { "no-lsc-interrupt",           0, 0, 0 },
618                 { "no-rmv-interrupt",           0, 0, 0 },
619                 { "print-event",                1, 0, 0 },
620                 { "mask-event",                 1, 0, 0 },
621                 { "tx-offloads",                1, 0, 0 },
622                 { 0, 0, 0, 0 },
623         };
624
625         argvopt = argv;
626
627 #ifdef RTE_LIBRTE_CMDLINE
628 #define SHORTOPTS "i"
629 #else
630 #define SHORTOPTS ""
631 #endif
632         while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
633                                  lgopts, &opt_idx)) != EOF) {
634                 switch (opt) {
635 #ifdef RTE_LIBRTE_CMDLINE
636                 case 'i':
637                         printf("Interactive-mode selected\n");
638                         interactive = 1;
639                         break;
640 #endif
641                 case 'a':
642                         printf("Auto-start selected\n");
643                         auto_start = 1;
644                         break;
645
646                 case 0: /*long options */
647                         if (!strcmp(lgopts[opt_idx].name, "help")) {
648                                 usage(argv[0]);
649                                 rte_exit(EXIT_SUCCESS, "Displayed help\n");
650                         }
651 #ifdef RTE_LIBRTE_CMDLINE
652                         if (!strcmp(lgopts[opt_idx].name, "interactive")) {
653                                 printf("Interactive-mode selected\n");
654                                 interactive = 1;
655                         }
656                         if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
657                                 printf("CLI commands to be read from %s\n",
658                                        optarg);
659                                 snprintf(cmdline_filename,
660                                          sizeof(cmdline_filename), "%s",
661                                          optarg);
662                         }
663                         if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
664                                 printf("Auto-start selected\n");
665                                 auto_start = 1;
666                         }
667                         if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
668                                 printf("Ports to start sending a burst of "
669                                                 "packets first\n");
670                                 tx_first = 1;
671                         }
672                         if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
673                                 char *end = NULL;
674                                 unsigned int n;
675
676                                 n = strtoul(optarg, &end, 10);
677                                 if ((optarg[0] == '\0') || (end == NULL) ||
678                                                 (*end != '\0'))
679                                         break;
680
681                                 stats_period = n;
682                                 break;
683                         }
684                         if (!strcmp(lgopts[opt_idx].name,
685                                     "eth-peers-configfile")) {
686                                 if (init_peer_eth_addrs(optarg) != 0)
687                                         rte_exit(EXIT_FAILURE,
688                                                  "Cannot open logfile\n");
689                         }
690                         if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
691                                 char *port_end;
692                                 uint8_t c, peer_addr[6];
693
694                                 errno = 0;
695                                 n = strtoul(optarg, &port_end, 10);
696                                 if (errno != 0 || port_end == optarg || *port_end++ != ',')
697                                         rte_exit(EXIT_FAILURE,
698                                                  "Invalid eth-peer: %s", optarg);
699                                 if (n >= RTE_MAX_ETHPORTS)
700                                         rte_exit(EXIT_FAILURE,
701                                                  "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
702                                                  n, RTE_MAX_ETHPORTS);
703
704                                 if (cmdline_parse_etheraddr(NULL, port_end,
705                                                 &peer_addr, sizeof(peer_addr)) < 0)
706                                         rte_exit(EXIT_FAILURE,
707                                                  "Invalid ethernet address: %s\n",
708                                                  port_end);
709                                 for (c = 0; c < 6; c++)
710                                         peer_eth_addrs[n].addr_bytes[c] =
711                                                 peer_addr[c];
712                                 nb_peer_eth_addrs++;
713                         }
714 #endif
715                         if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
716                                 n = atoi(optarg);
717                                 if (n > 0 && n <= nb_ports)
718                                         nb_fwd_ports = n;
719                                 else
720                                         rte_exit(EXIT_FAILURE,
721                                                  "Invalid port %d\n", n);
722                         }
723                         if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
724                                 n = atoi(optarg);
725                                 if (n > 0 && n <= nb_lcores)
726                                         nb_fwd_lcores = (uint8_t) n;
727                                 else
728                                         rte_exit(EXIT_FAILURE,
729                                                  "nb-cores should be > 0 and <= %d\n",
730                                                  nb_lcores);
731                         }
732                         if (!strcmp(lgopts[opt_idx].name, "coremask"))
733                                 parse_fwd_coremask(optarg);
734                         if (!strcmp(lgopts[opt_idx].name, "portmask"))
735                                 parse_fwd_portmask(optarg);
736                         if (!strcmp(lgopts[opt_idx].name, "no-numa"))
737                                 numa_support = 0;
738                         if (!strcmp(lgopts[opt_idx].name, "numa"))
739                                 numa_support = 1;
740                         if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
741                                 mp_anon = 1;
742                         }
743                         if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
744                                 if (parse_portnuma_config(optarg))
745                                         rte_exit(EXIT_FAILURE,
746                                            "invalid port-numa configuration\n");
747                         }
748                         if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
749                                 if (parse_ringnuma_config(optarg))
750                                         rte_exit(EXIT_FAILURE,
751                                            "invalid ring-numa configuration\n");
752                         if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
753                                 n = atoi(optarg);
754                                 if (!new_socket_id((uint8_t)n)) {
755                                         socket_num = (uint8_t)n;
756                                 } else {
757                                         print_invalid_socket_id_error();
758                                         rte_exit(EXIT_FAILURE,
759                                                 "Invalid socket id");
760                                 }
761                         }
762                         if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
763                                 n = atoi(optarg);
764                                 if (n > 0 && n <= 0xFFFF)
765                                         mbuf_data_size = (uint16_t) n;
766                                 else
767                                         rte_exit(EXIT_FAILURE,
768                                                  "mbuf-size should be > 0 and < 65536\n");
769                         }
770                         if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
771                                 n = atoi(optarg);
772                                 if (n > 1024)
773                                         param_total_num_mbufs = (unsigned)n;
774                                 else
775                                         rte_exit(EXIT_FAILURE,
776                                                  "total-num-mbufs should be > 1024\n");
777                         }
778                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
779                                 n = atoi(optarg);
780                                 if (n >= ETHER_MIN_LEN) {
781                                         rx_mode.max_rx_pkt_len = (uint32_t) n;
782                                         if (n > ETHER_MAX_LEN)
783                                                 rx_offloads |=
784                                                         DEV_RX_OFFLOAD_JUMBO_FRAME;
785                                 } else
786                                         rte_exit(EXIT_FAILURE,
787                                                  "Invalid max-pkt-len=%d - should be > %d\n",
788                                                  n, ETHER_MIN_LEN);
789                         }
790                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
791                                 if (!strcmp(optarg, "signature"))
792                                         fdir_conf.mode =
793                                                 RTE_FDIR_MODE_SIGNATURE;
794                                 else if (!strcmp(optarg, "perfect"))
795                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
796                                 else if (!strcmp(optarg, "perfect-mac-vlan"))
797                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
798                                 else if (!strcmp(optarg, "perfect-tunnel"))
799                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
800                                 else if (!strcmp(optarg, "none"))
801                                         fdir_conf.mode = RTE_FDIR_MODE_NONE;
802                                 else
803                                         rte_exit(EXIT_FAILURE,
804                                                  "pkt-mode-invalid %s invalid - must be: "
805                                                  "none, signature, perfect, perfect-mac-vlan"
806                                                  " or perfect-tunnel\n",
807                                                  optarg);
808                         }
809                         if (!strcmp(lgopts[opt_idx].name,
810                                     "pkt-filter-report-hash")) {
811                                 if (!strcmp(optarg, "none"))
812                                         fdir_conf.status =
813                                                 RTE_FDIR_NO_REPORT_STATUS;
814                                 else if (!strcmp(optarg, "match"))
815                                         fdir_conf.status =
816                                                 RTE_FDIR_REPORT_STATUS;
817                                 else if (!strcmp(optarg, "always"))
818                                         fdir_conf.status =
819                                                 RTE_FDIR_REPORT_STATUS_ALWAYS;
820                                 else
821                                         rte_exit(EXIT_FAILURE,
822                                                  "pkt-filter-report-hash %s invalid "
823                                                  "- must be: none or match or always\n",
824                                                  optarg);
825                         }
826                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
827                                 if (!strcmp(optarg, "64K"))
828                                         fdir_conf.pballoc =
829                                                 RTE_FDIR_PBALLOC_64K;
830                                 else if (!strcmp(optarg, "128K"))
831                                         fdir_conf.pballoc =
832                                                 RTE_FDIR_PBALLOC_128K;
833                                 else if (!strcmp(optarg, "256K"))
834                                         fdir_conf.pballoc =
835                                                 RTE_FDIR_PBALLOC_256K;
836                                 else
837                                         rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
838                                                  " must be: 64K or 128K or 256K\n",
839                                                  optarg);
840                         }
841                         if (!strcmp(lgopts[opt_idx].name,
842                                     "pkt-filter-drop-queue")) {
843                                 n = atoi(optarg);
844                                 if (n >= 0)
845                                         fdir_conf.drop_queue = (uint8_t) n;
846                                 else
847                                         rte_exit(EXIT_FAILURE,
848                                                  "drop queue %d invalid - must"
849                                                  "be >= 0 \n", n);
850                         }
851 #ifdef RTE_LIBRTE_LATENCY_STATS
852                         if (!strcmp(lgopts[opt_idx].name,
853                                     "latencystats")) {
854                                 n = atoi(optarg);
855                                 if (n >= 0) {
856                                         latencystats_lcore_id = (lcoreid_t) n;
857                                         latencystats_enabled = 1;
858                                 } else
859                                         rte_exit(EXIT_FAILURE,
860                                                  "invalid lcore id %d for latencystats"
861                                                  " must be >= 0\n", n);
862                         }
863 #endif
864 #ifdef RTE_LIBRTE_BITRATE
865                         if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
866                                 n = atoi(optarg);
867                                 if (n >= 0) {
868                                         bitrate_lcore_id = (lcoreid_t) n;
869                                         bitrate_enabled = 1;
870                                 } else
871                                         rte_exit(EXIT_FAILURE,
872                                                  "invalid lcore id %d for bitrate stats"
873                                                  " must be >= 0\n", n);
874                         }
875 #endif
876                         if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
877                                 rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
878                         if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
879                                 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
880                         if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
881                                 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
882                         if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
883                                 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
884                         if (!strcmp(lgopts[opt_idx].name,
885                                         "enable-rx-timestamp"))
886                                 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
887                         if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan"))
888                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN;
889
890                         if (!strcmp(lgopts[opt_idx].name,
891                                         "disable-hw-vlan-filter"))
892                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
893
894                         if (!strcmp(lgopts[opt_idx].name,
895                                         "disable-hw-vlan-strip"))
896                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
897
898                         if (!strcmp(lgopts[opt_idx].name,
899                                         "disable-hw-vlan-extend"))
900                                 rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
901
902                         if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
903                                 rx_drop_en = 1;
904
905                         if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
906                                 rss_hf = 0;
907                         if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
908                                 if (!strcmp(optarg, "paired"))
909                                         port_topology = PORT_TOPOLOGY_PAIRED;
910                                 else if (!strcmp(optarg, "chained"))
911                                         port_topology = PORT_TOPOLOGY_CHAINED;
912                                 else if (!strcmp(optarg, "loop"))
913                                         port_topology = PORT_TOPOLOGY_LOOP;
914                                 else
915                                         rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
916                                                  " must be: paired, chained or loop\n",
917                                                  optarg);
918                         }
919                         if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
920                                 set_pkt_forwarding_mode(optarg);
921                         if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
922                                 rss_hf = ETH_RSS_IP;
923                         if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
924                                 rss_hf = ETH_RSS_UDP;
925                         if (!strcmp(lgopts[opt_idx].name, "rxq")) {
926                                 n = atoi(optarg);
927                                 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
928                                         nb_rxq = (queueid_t) n;
929                                 else
930                                         rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
931                                                   " >= 0 && <= %d\n", n,
932                                                   (int) MAX_QUEUE_ID);
933                         }
934                         if (!strcmp(lgopts[opt_idx].name, "txq")) {
935                                 n = atoi(optarg);
936                                 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
937                                         nb_txq = (queueid_t) n;
938                                 else
939                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
940                                                   " >= 0 && <= %d\n", n,
941                                                   (int) MAX_QUEUE_ID);
942                         }
943                         if (!nb_rxq && !nb_txq) {
944                                 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
945                                                 "be non-zero\n");
946                         }
947                         if (!strcmp(lgopts[opt_idx].name, "burst")) {
948                                 n = atoi(optarg);
949                                 if ((n >= 1) && (n <= MAX_PKT_BURST))
950                                         nb_pkt_per_burst = (uint16_t) n;
951                                 else
952                                         rte_exit(EXIT_FAILURE,
953                                                  "burst must >= 1 and <= %d]",
954                                                  MAX_PKT_BURST);
955                         }
956                         if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
957                                 n = atoi(optarg);
958                                 if ((n >= 0) &&
959                                     (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
960                                         mb_mempool_cache = (uint16_t) n;
961                                 else
962                                         rte_exit(EXIT_FAILURE,
963                                                  "mbcache must be >= 0 and <= %d\n",
964                                                  RTE_MEMPOOL_CACHE_MAX_SIZE);
965                         }
966                         if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
967                                 n = atoi(optarg);
968                                 if (n >= 0)
969                                         tx_free_thresh = (int16_t)n;
970                                 else
971                                         rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
972                         }
973                         if (!strcmp(lgopts[opt_idx].name, "txrst")) {
974                                 n = atoi(optarg);
975                                 if (n >= 0)
976                                         tx_rs_thresh = (int16_t)n;
977                                 else
978                                         rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
979                         }
980                         if (!strcmp(lgopts[opt_idx].name, "txqflags")) {
981                                 char *end = NULL;
982                                 n = strtoul(optarg, &end, 16);
983                                 if (n >= 0)
984                                         txq_flags = (int32_t)n;
985                                 else
986                                         rte_exit(EXIT_FAILURE,
987                                                  "txqflags must be >= 0\n");
988                         }
989                         if (!strcmp(lgopts[opt_idx].name, "rxd")) {
990                                 n = atoi(optarg);
991                                 if (n > 0) {
992                                         if (rx_free_thresh >= n)
993                                                 rte_exit(EXIT_FAILURE,
994                                                          "rxd must be > "
995                                                          "rx_free_thresh(%d)\n",
996                                                          (int)rx_free_thresh);
997                                         else
998                                                 nb_rxd = (uint16_t) n;
999                                 } else
1000                                         rte_exit(EXIT_FAILURE,
1001                                                  "rxd(%d) invalid - must be > 0\n",
1002                                                  n);
1003                         }
1004                         if (!strcmp(lgopts[opt_idx].name, "txd")) {
1005                                 n = atoi(optarg);
1006                                 if (n > 0)
1007                                         nb_txd = (uint16_t) n;
1008                                 else
1009                                         rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1010                         }
1011                         if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1012                                 n = atoi(optarg);
1013                                 if (n >= 0)
1014                                         tx_pthresh = (int8_t)n;
1015                                 else
1016                                         rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1017                         }
1018                         if (!strcmp(lgopts[opt_idx].name, "txht")) {
1019                                 n = atoi(optarg);
1020                                 if (n >= 0)
1021                                         tx_hthresh = (int8_t)n;
1022                                 else
1023                                         rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1024                         }
1025                         if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1026                                 n = atoi(optarg);
1027                                 if (n >= 0)
1028                                         tx_wthresh = (int8_t)n;
1029                                 else
1030                                         rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1031                         }
1032                         if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1033                                 n = atoi(optarg);
1034                                 if (n >= 0)
1035                                         rx_pthresh = (int8_t)n;
1036                                 else
1037                                         rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1038                         }
1039                         if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1040                                 n = atoi(optarg);
1041                                 if (n >= 0)
1042                                         rx_hthresh = (int8_t)n;
1043                                 else
1044                                         rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1045                         }
1046                         if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1047                                 n = atoi(optarg);
1048                                 if (n >= 0)
1049                                         rx_wthresh = (int8_t)n;
1050                                 else
1051                                         rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1052                         }
1053                         if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1054                                 n = atoi(optarg);
1055                                 if (n >= 0)
1056                                         rx_free_thresh = (int16_t)n;
1057                                 else
1058                                         rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1059                         }
1060                         if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
1061                                 if (parse_queue_stats_mapping_config(optarg, TX)) {
1062                                         rte_exit(EXIT_FAILURE,
1063                                                  "invalid TX queue statistics mapping config entered\n");
1064                                 }
1065                         }
1066                         if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
1067                                 if (parse_queue_stats_mapping_config(optarg, RX)) {
1068                                         rte_exit(EXIT_FAILURE,
1069                                                  "invalid RX queue statistics mapping config entered\n");
1070                                 }
1071                         }
1072                         if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1073                                 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1074                                 unsigned int nb_segs;
1075
1076                                 nb_segs = parse_item_list(optarg, "txpkt segments",
1077                                                 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1078                                 if (nb_segs > 0)
1079                                         set_tx_pkt_segments(seg_lengths, nb_segs);
1080                                 else
1081                                         rte_exit(EXIT_FAILURE, "bad txpkts\n");
1082                         }
1083                         if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1084                                 no_flush_rx = 1;
1085                         if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1086                                 no_link_check = 1;
1087                         if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1088                                 lsc_interrupt = 0;
1089                         if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1090                                 rmv_interrupt = 0;
1091                         if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1092                                 flow_isolate_all = 1;
1093                         if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1094                                 char *end = NULL;
1095                                 n = strtoull(optarg, &end, 16);
1096                                 if (n >= 0)
1097                                         tx_offloads = (uint64_t)n;
1098                                 else
1099                                         rte_exit(EXIT_FAILURE,
1100                                                  "tx-offloads must be >= 0\n");
1101                         }
1102                         if (!strcmp(lgopts[opt_idx].name, "print-event"))
1103                                 if (parse_event_printing_config(optarg, 1)) {
1104                                         rte_exit(EXIT_FAILURE,
1105                                                  "invalid print-event argument\n");
1106                                 }
1107                         if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1108                                 if (parse_event_printing_config(optarg, 0)) {
1109                                         rte_exit(EXIT_FAILURE,
1110                                                  "invalid mask-event argument\n");
1111                                 }
1112
1113                         break;
1114                 case 'h':
1115                         usage(argv[0]);
1116                         rte_exit(EXIT_SUCCESS, "Displayed help\n");
1117                         break;
1118                 default:
1119                         usage(argv[0]);
1120                         rte_exit(EXIT_FAILURE,
1121                                  "Command line is incomplete or incorrect\n");
1122                         break;
1123                 }
1124         }
1125
1126         /* Set offload configuration from command line parameters. */
1127         rx_mode.offloads = rx_offloads;
1128         tx_mode.offloads = tx_offloads;
1129 }