ethdev: add API for getting burst mode information
[dpdk.git] / doc / guides / nics / features.rst
1 ..  SPDX-License-Identifier: BSD-3-Clause
2     Copyright(c) 2017 Intel Corporation.
3
4 Features Overview
5 =================
6
7 This section explains the supported features that are listed in the
8 :doc:`overview`.
9
10 As a guide to implementers it also shows the structs where the features are
11 defined and the APIs that can be use to get/set the values.
12
13 Following tags used for feature details, these are from driver point of view:
14
15 ``[uses]``       : Driver uses some kind of input from the application.
16
17 ``[implements]`` : Driver implements a functionality.
18
19 ``[provides]``   : Driver provides some kind of data to the application. It is possible
20 to provide data by implementing some function, but "provides" is used
21 for cases where provided data can't be represented simply by a function.
22
23 ``[related]``    : Related API with that feature.
24
25
26 .. _nic_features_speed_capabilities:
27
28 Speed capabilities
29 ------------------
30
31 Supports getting the speed capabilities that the current device is capable of.
32
33 * **[provides] rte_eth_dev_info**: ``speed_capa:ETH_LINK_SPEED_*``.
34 * **[related]  API**: ``rte_eth_dev_info_get()``.
35
36
37 .. _nic_features_link_status:
38
39 Link status
40 -----------
41
42 Supports getting the link speed, duplex mode and link state (up/down).
43
44 * **[implements] eth_dev_ops**: ``link_update``.
45 * **[implements] rte_eth_dev_data**: ``dev_link``.
46 * **[related]    API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
47
48
49 .. _nic_features_link_status_event:
50
51 Link status event
52 -----------------
53
54 Supports Link Status Change interrupts.
55
56 * **[uses]       user config**: ``dev_conf.intr_conf.lsc``.
57 * **[uses]       rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_LSC``.
58 * **[uses]       rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_LSC``.
59 * **[implements] rte_eth_dev_data**: ``dev_link``.
60 * **[provides]   rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_LSC``.
61 * **[related]    API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
62
63
64 .. _nic_features_removal_event:
65
66 Removal event
67 -------------
68
69 Supports device removal interrupts.
70
71 * **[uses]     user config**: ``dev_conf.intr_conf.rmv``.
72 * **[uses]     rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_RMV``.
73 * **[uses]     rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_RMV``.
74 * **[provides] rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_RMV``.
75
76
77 .. _nic_features_queue_status_event:
78
79 Queue status event
80 ------------------
81
82 Supports queue enable/disable events.
83
84 * **[uses] rte_eth_event_type**: ``RTE_ETH_EVENT_QUEUE_STATE``.
85
86
87 .. _nic_features_rx_interrupt:
88
89 Rx interrupt
90 ------------
91
92 Supports Rx interrupts.
93
94 * **[uses]       user config**: ``dev_conf.intr_conf.rxq``.
95 * **[implements] eth_dev_ops**: ``rx_queue_intr_enable``, ``rx_queue_intr_disable``.
96 * **[related]    API**: ``rte_eth_dev_rx_intr_enable()``, ``rte_eth_dev_rx_intr_disable()``.
97
98
99 .. _nic_features_lock-free_tx_queue:
100
101 Lock-free Tx queue
102 ------------------
103
104 If a PMD advertises DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
105 invoke rte_eth_tx_burst() concurrently on the same Tx queue without SW lock.
106
107 * **[uses]    rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MT_LOCKFREE``.
108 * **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MT_LOCKFREE``.
109 * **[related]  API**: ``rte_eth_tx_burst()``.
110
111
112 .. _nic_features_fast_mbuf_free:
113
114 Fast mbuf free
115 --------------
116
117 Supports optimization for fast release of mbufs following successful Tx.
118 Requires that per queue, all mbufs come from the same mempool and has refcnt = 1.
119
120 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
121 * **[provides]   rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
122
123
124 .. _nic_features_free_tx_mbuf_on_demand:
125
126 Free Tx mbuf on demand
127 ----------------------
128
129 Supports freeing consumed buffers on a Tx ring.
130
131 * **[implements] eth_dev_ops**: ``tx_done_cleanup``.
132 * **[related]    API**: ``rte_eth_tx_done_cleanup()``.
133
134
135 .. _nic_features_queue_start_stop:
136
137 Queue start/stop
138 ----------------
139
140 Supports starting/stopping a specific Rx/Tx queue of a port.
141
142 * **[implements] eth_dev_ops**: ``rx_queue_start``, ``rx_queue_stop``, ``tx_queue_start``,
143   ``tx_queue_stop``.
144 * **[related]    API**: ``rte_eth_dev_rx_queue_start()``, ``rte_eth_dev_rx_queue_stop()``,
145   ``rte_eth_dev_tx_queue_start()``, ``rte_eth_dev_tx_queue_stop()``.
146
147
148 .. _nic_features_mtu_update:
149
150 MTU update
151 ----------
152
153 Supports updating port MTU.
154
155 * **[implements] eth_dev_ops**: ``mtu_set``.
156 * **[implements] rte_eth_dev_data**: ``mtu``.
157 * **[provides]   rte_eth_dev_info**: ``max_rx_pktlen``.
158 * **[related]    API**: ``rte_eth_dev_set_mtu()``, ``rte_eth_dev_get_mtu()``.
159
160
161 .. _nic_features_jumbo_frame:
162
163 Jumbo frame
164 -----------
165
166 Supports Rx jumbo frames.
167
168 * **[uses]    rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_JUMBO_FRAME``.
169   ``dev_conf.rxmode.max_rx_pkt_len``.
170 * **[related] rte_eth_dev_info**: ``max_rx_pktlen``.
171 * **[related] API**: ``rte_eth_dev_set_mtu()``.
172
173
174 .. _nic_features_scattered_rx:
175
176 Scattered Rx
177 ------------
178
179 Supports receiving segmented mbufs.
180
181 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SCATTER``.
182 * **[implements] datapath**: ``Scattered Rx function``.
183 * **[implements] rte_eth_dev_data**: ``scattered_rx``.
184 * **[provides]   eth_dev_ops**: ``rxq_info_get:scattered_rx``.
185 * **[related]    eth_dev_ops**: ``rx_pkt_burst``.
186
187
188 .. _nic_features_lro:
189
190 LRO
191 ---
192
193 Supports Large Receive Offload.
194
195 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TCP_LRO``.
196 * **[implements] datapath**: ``LRO functionality``.
197 * **[implements] rte_eth_dev_data**: ``lro``.
198 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_LRO``, ``mbuf.tso_segsz``.
199 * **[provides]   rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_TCP_LRO``.
200
201
202 .. _nic_features_tso:
203
204 TSO
205 ---
206
207 Supports TCP Segmentation Offloading.
208
209 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_TCP_TSO``.
210 * **[uses]       rte_eth_desc_lim**: ``nb_seg_max``, ``nb_mtu_seg_max``.
211 * **[uses]       mbuf**: ``mbuf.ol_flags:`` ``PKT_TX_TCP_SEG``, ``PKT_TX_IPV4``, ``PKT_TX_IPV6``, ``PKT_TX_IP_CKSUM``.
212 * **[uses]       mbuf**: ``mbuf.tso_segsz``, ``mbuf.l2_len``, ``mbuf.l3_len``, ``mbuf.l4_len``.
213 * **[implements] datapath**: ``TSO functionality``.
214 * **[provides]   rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_TCP_TSO,DEV_TX_OFFLOAD_UDP_TSO``.
215
216
217 .. _nic_features_promiscuous_mode:
218
219 Promiscuous mode
220 ----------------
221
222 Supports enabling/disabling promiscuous mode for a port.
223
224 * **[implements] eth_dev_ops**: ``promiscuous_enable``, ``promiscuous_disable``.
225 * **[implements] rte_eth_dev_data**: ``promiscuous``.
226 * **[related]    API**: ``rte_eth_promiscuous_enable()``, ``rte_eth_promiscuous_disable()``,
227   ``rte_eth_promiscuous_get()``.
228
229
230 .. _nic_features_allmulticast_mode:
231
232 Allmulticast mode
233 -----------------
234
235 Supports enabling/disabling receiving multicast frames.
236
237 * **[implements] eth_dev_ops**: ``allmulticast_enable``, ``allmulticast_disable``.
238 * **[implements] rte_eth_dev_data**: ``all_multicast``.
239 * **[related]    API**: ``rte_eth_allmulticast_enable()``,
240   ``rte_eth_allmulticast_disable()``, ``rte_eth_allmulticast_get()``.
241
242
243 .. _nic_features_unicast_mac_filter:
244
245 Unicast MAC filter
246 ------------------
247
248 Supports adding MAC addresses to enable whitelist filtering to accept packets.
249
250 * **[implements] eth_dev_ops**: ``mac_addr_set``, ``mac_addr_add``, ``mac_addr_remove``.
251 * **[implements] rte_eth_dev_data**: ``mac_addrs``.
252 * **[related]    API**: ``rte_eth_dev_default_mac_addr_set()``,
253   ``rte_eth_dev_mac_addr_add()``, ``rte_eth_dev_mac_addr_remove()``,
254   ``rte_eth_macaddr_get()``.
255
256
257 .. _nic_features_multicast_mac_filter:
258
259 Multicast MAC filter
260 --------------------
261
262 Supports setting multicast addresses to filter.
263
264 * **[implements] eth_dev_ops**: ``set_mc_addr_list``.
265 * **[related]    API**: ``rte_eth_dev_set_mc_addr_list()``.
266
267
268 .. _nic_features_rss_hash:
269
270 RSS hash
271 --------
272
273 Supports RSS hashing on RX.
274
275 * **[uses]     user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_RSS_FLAG``.
276 * **[uses]     user config**: ``dev_conf.rx_adv_conf.rss_conf``.
277 * **[provides] rte_eth_dev_info**: ``flow_type_rss_offloads``.
278 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
279
280
281 .. _nic_features_inner_rss:
282
283 Inner RSS
284 ---------
285
286 Supports RX RSS hashing on Inner headers.
287
288 * **[uses]    rte_flow_action_rss**: ``level``.
289 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
290
291
292 .. _nic_features_rss_key_update:
293
294 RSS key update
295 --------------
296
297 Supports configuration of Receive Side Scaling (RSS) hash computation. Updating
298 Receive Side Scaling (RSS) hash key.
299
300 * **[implements] eth_dev_ops**: ``rss_hash_update``, ``rss_hash_conf_get``.
301 * **[provides]   rte_eth_dev_info**: ``hash_key_size``.
302 * **[related]    API**: ``rte_eth_dev_rss_hash_update()``,
303   ``rte_eth_dev_rss_hash_conf_get()``.
304
305
306 .. _nic_features_rss_reta_update:
307
308 RSS reta update
309 ---------------
310
311 Supports updating Redirection Table of the Receive Side Scaling (RSS).
312
313 * **[implements] eth_dev_ops**: ``reta_update``, ``reta_query``.
314 * **[provides]   rte_eth_dev_info**: ``reta_size``.
315 * **[related]    API**: ``rte_eth_dev_rss_reta_update()``, ``rte_eth_dev_rss_reta_query()``.
316
317
318 .. _nic_features_vmdq:
319
320 VMDq
321 ----
322
323 Supports Virtual Machine Device Queues (VMDq).
324
325 * **[uses] user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_VMDQ_FLAG``.
326 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
327 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_rx_conf``.
328 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
329 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
330
331
332 .. _nic_features_sriov:
333
334 SR-IOV
335 ------
336
337 Driver supports creating Virtual Functions.
338
339 * **[implements] rte_eth_dev_data**: ``sriov``.
340
341 .. _nic_features_dcb:
342
343 DCB
344 ---
345
346 Supports Data Center Bridging (DCB).
347
348 * **[uses]       user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_DCB_FLAG``.
349 * **[uses]       user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
350 * **[uses]       user config**: ``dev_conf.rx_adv_conf.dcb_rx_conf``.
351 * **[uses]       user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
352 * **[uses]       user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
353 * **[implements] eth_dev_ops**: ``get_dcb_info``.
354 * **[related]    API**: ``rte_eth_dev_get_dcb_info()``.
355
356
357 .. _nic_features_vlan_filter:
358
359 VLAN filter
360 -----------
361
362 Supports filtering of a VLAN Tag identifier.
363
364 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_FILTER``.
365 * **[implements] eth_dev_ops**: ``vlan_filter_set``.
366 * **[related]    API**: ``rte_eth_dev_vlan_filter()``.
367
368
369 .. _nic_features_flow_control:
370
371 Flow control
372 ------------
373
374 Supports configuring link flow control.
375
376 * **[implements] eth_dev_ops**: ``flow_ctrl_get``, ``flow_ctrl_set``,
377   ``priority_flow_ctrl_set``.
378 * **[related]    API**: ``rte_eth_dev_flow_ctrl_get()``, ``rte_eth_dev_flow_ctrl_set()``,
379   ``rte_eth_dev_priority_flow_ctrl_set()``.
380
381
382 .. _nic_features_flow_api:
383
384 Flow API
385 --------
386
387 Supports the DPDK Flow API for generic filtering.
388
389 * **[implements] eth_dev_ops**: ``filter_ctrl:RTE_ETH_FILTER_GENERIC``.
390 * **[implements] rte_flow_ops**: ``All``.
391
392
393 .. _nic_features_rate_limitation:
394
395 Rate limitation
396 ---------------
397
398 Supports Tx rate limitation for a queue.
399
400 * **[implements] eth_dev_ops**: ``set_queue_rate_limit``.
401 * **[related]    API**: ``rte_eth_set_queue_rate_limit()``.
402
403
404 .. _nic_features_traffic_mirroring:
405
406 Traffic mirroring
407 -----------------
408
409 Supports adding traffic mirroring rules.
410
411 * **[implements] eth_dev_ops**: ``mirror_rule_set``, ``mirror_rule_reset``.
412 * **[related]    API**: ``rte_eth_mirror_rule_set()``, ``rte_eth_mirror_rule_reset()``.
413
414
415 .. _nic_features_inline_crypto_doc:
416
417 Inline crypto
418 -------------
419
420 Supports inline crypto processing (e.g. inline IPsec). See Security library and PMD documentation for more details.
421
422 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SECURITY``,
423 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_SECURITY``.
424 * **[implements] rte_security_ops**: ``session_create``, ``session_update``,
425   ``session_stats_get``, ``session_destroy``, ``set_pkt_metadata``, ``capabilities_get``.
426 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_SECURITY``,
427   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_SECURITY``.
428 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD``,
429   ``mbuf.ol_flags:PKT_TX_SEC_OFFLOAD``, ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD_FAILED``.
430
431
432 .. _nic_features_crc_offload:
433
434 CRC offload
435 -----------
436
437 Supports CRC stripping by hardware.
438 A PMD assumed to support CRC stripping by default. PMD should advertise if it supports keeping CRC.
439
440 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_KEEP_CRC``.
441
442
443 .. _nic_features_vlan_offload:
444
445 VLAN offload
446 ------------
447
448 Supports VLAN offload to hardware.
449
450 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_STRIP,DEV_RX_OFFLOAD_VLAN_FILTER,DEV_RX_OFFLOAD_VLAN_EXTEND``.
451 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_VLAN_INSERT``.
452 * **[uses]       mbuf**: ``mbuf.ol_flags:PKT_TX_VLAN``, ``mbuf.vlan_tci``.
453 * **[implements] eth_dev_ops**: ``vlan_offload_set``.
454 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN`` ``mbuf.vlan_tci``.
455 * **[provides]   rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
456   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
457 * **[related]    API**: ``rte_eth_dev_set_vlan_offload()``,
458   ``rte_eth_dev_get_vlan_offload()``.
459
460
461 .. _nic_features_qinq_offload:
462
463 QinQ offload
464 ------------
465
466 Supports QinQ (queue in queue) offload.
467
468 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_QINQ_STRIP``.
469 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_QINQ_INSERT``.
470 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_QINQ``, ``mbuf.vlan_tci_outer``.
471 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.ol_flags:PKT_RX_QINQ``,
472   ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN``
473   ``mbuf.vlan_tci``, ``mbuf.vlan_tci_outer``.
474 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
475   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
476
477
478 .. _nic_features_l3_checksum_offload:
479
480 L3 checksum offload
481 -------------------
482
483 Supports L3 checksum offload.
484
485 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_IPV4_CKSUM``.
486 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_IPV4_CKSUM``.
487 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
488   ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``.
489 * **[uses]     mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
490 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_IP_CKSUM_UNKNOWN`` |
491   ``PKT_RX_IP_CKSUM_BAD`` | ``PKT_RX_IP_CKSUM_GOOD`` |
492   ``PKT_RX_IP_CKSUM_NONE``.
493 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_IPV4_CKSUM``,
494   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_IPV4_CKSUM``.
495
496
497 .. _nic_features_l4_checksum_offload:
498
499 L4 checksum offload
500 -------------------
501
502 Supports L4 checksum offload.
503
504 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``.
505 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
506 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
507   ``mbuf.ol_flags:PKT_TX_L4_NO_CKSUM`` | ``PKT_TX_TCP_CKSUM`` |
508   ``PKT_TX_SCTP_CKSUM`` | ``PKT_TX_UDP_CKSUM``.
509 * **[uses]     mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
510 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_L4_CKSUM_UNKNOWN`` |
511   ``PKT_RX_L4_CKSUM_BAD`` | ``PKT_RX_L4_CKSUM_GOOD`` |
512   ``PKT_RX_L4_CKSUM_NONE``.
513 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``,
514   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
515
516 .. _nic_features_hw_timestamp:
517
518 Timestamp offload
519 -----------------
520
521 Supports Timestamp.
522
523 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TIMESTAMP``.
524 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
525 * **[provides] mbuf**: ``mbuf.timestamp``.
526 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
527 * **[related] eth_dev_ops**: ``read_clock``.
528
529 .. _nic_features_macsec_offload:
530
531 MACsec offload
532 --------------
533
534 Supports MACsec.
535
536 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_MACSEC_STRIP``.
537 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MACSEC_INSERT``.
538 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_MACSEC``.
539 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_MACSEC_STRIP``,
540   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MACSEC_INSERT``.
541
542
543 .. _nic_features_inner_l3_checksum:
544
545 Inner L3 checksum
546 -----------------
547
548 Supports inner packet L3 checksum.
549
550 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``.
551 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
552 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
553   ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
554   ``mbuf.ol_flags:PKT_TX_OUTER_IP_CKSUM``,
555   ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
556 * **[uses]     mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
557 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_EIP_CKSUM_BAD``.
558 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``,
559   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
560
561
562 .. _nic_features_inner_l4_checksum:
563
564 Inner L4 checksum
565 -----------------
566
567 Supports inner packet L4 checksum.
568
569 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``.
570 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_OUTER_L4_CKSUM_UNKNOWN`` |
571   ``PKT_RX_OUTER_L4_CKSUM_BAD`` | ``PKT_RX_OUTER_L4_CKSUM_GOOD`` | ``PKT_RX_OUTER_L4_CKSUM_INVALID``.
572 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
573 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
574   ``mbuf.ol_flags:PKT_TX_OUTER_UDP_CKSUM``.
575 * **[uses]     mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
576 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``,
577   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
578
579
580 .. _nic_features_packet_type_parsing:
581
582 Packet type parsing
583 -------------------
584
585 Supports packet type parsing and returns a list of supported types.
586
587 * **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``.
588 * **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``.
589
590
591 .. _nic_features_timesync:
592
593 Timesync
594 --------
595
596 Supports IEEE1588/802.1AS timestamping.
597
598 * **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
599   ``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
600   ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
601 * **[related]    API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
602   ``rte_eth_timesync_read_rx_timestamp()``,
603   ``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
604   ``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
605
606
607 .. _nic_features_rx_descriptor_status:
608
609 Rx descriptor status
610 --------------------
611
612 Supports check the status of a Rx descriptor. When ``rx_descriptor_status`` is
613 used, status can be "Available", "Done" or "Unavailable". When
614 ``rx_descriptor_done`` is used, status can be "DD bit is set" or "DD bit is
615 not set".
616
617 * **[implements] eth_dev_ops**: ``rx_descriptor_status``.
618 * **[related]    API**: ``rte_eth_rx_descriptor_status()``.
619 * **[implements] eth_dev_ops**: ``rx_descriptor_done``.
620 * **[related]    API**: ``rte_eth_rx_descriptor_done()``.
621
622
623 .. _nic_features_tx_descriptor_status:
624
625 Tx descriptor status
626 --------------------
627
628 Supports checking the status of a Tx descriptor. Status can be "Full", "Done"
629 or "Unavailable."
630
631 * **[implements] eth_dev_ops**: ``tx_descriptor_status``.
632 * **[related]    API**: ``rte_eth_tx_descriptor_status()``.
633
634
635 .. _nic_features_basic_stats:
636
637 Basic stats
638 -----------
639
640 Support basic statistics such as: ipackets, opackets, ibytes, obytes,
641 imissed, ierrors, oerrors, rx_nombuf.
642
643 And per queue stats: q_ipackets, q_opackets, q_ibytes, q_obytes, q_errors.
644
645 These apply to all drivers.
646
647 * **[implements] eth_dev_ops**: ``stats_get``, ``stats_reset``.
648 * **[related]    API**: ``rte_eth_stats_get``, ``rte_eth_stats_reset()``.
649
650
651 .. _nic_features_extended_stats:
652
653 Extended stats
654 --------------
655
656 Supports Extended Statistics, changes from driver to driver.
657
658 * **[implements] eth_dev_ops**: ``xstats_get``, ``xstats_reset``, ``xstats_get_names``.
659 * **[implements] eth_dev_ops**: ``xstats_get_by_id``, ``xstats_get_names_by_id``.
660 * **[related]    API**: ``rte_eth_xstats_get()``, ``rte_eth_xstats_reset()``,
661   ``rte_eth_xstats_get_names``, ``rte_eth_xstats_get_by_id()``,
662   ``rte_eth_xstats_get_names_by_id()``, ``rte_eth_xstats_get_id_by_name()``.
663
664
665 .. _nic_features_stats_per_queue:
666
667 Stats per queue
668 ---------------
669
670 Supports configuring per-queue stat counter mapping.
671
672 * **[implements] eth_dev_ops**: ``queue_stats_mapping_set``.
673 * **[related]    API**: ``rte_eth_dev_set_rx_queue_stats_mapping()``,
674   ``rte_eth_dev_set_tx_queue_stats_mapping()``.
675
676
677 .. _nic_features_fw_version:
678
679 FW version
680 ----------
681
682 Supports getting device hardware firmware information.
683
684 * **[implements] eth_dev_ops**: ``fw_version_get``.
685 * **[related]    API**: ``rte_eth_dev_fw_version_get()``.
686
687
688 .. _nic_features_eeprom_dump:
689
690 EEPROM dump
691 -----------
692
693 Supports getting/setting device eeprom data.
694
695 * **[implements] eth_dev_ops**: ``get_eeprom_length``, ``get_eeprom``, ``set_eeprom``.
696 * **[related]    API**: ``rte_eth_dev_get_eeprom_length()``, ``rte_eth_dev_get_eeprom()``,
697   ``rte_eth_dev_set_eeprom()``.
698
699
700 .. _nic_features_module_eeprom_dump:
701
702 Module EEPROM dump
703 ------------------
704
705 Supports getting information and data of plugin module eeprom.
706
707 * **[implements] eth_dev_ops**: ``get_module_info``, ``get_module_eeprom``.
708 * **[related]    API**: ``rte_eth_dev_get_module_info()``, ``rte_eth_dev_get_module_eeprom()``.
709
710
711 .. _nic_features_register_dump:
712
713 Registers dump
714 --------------
715
716 Supports retrieving device registers and registering attributes (number of
717 registers and register size).
718
719 * **[implements] eth_dev_ops**: ``get_reg``.
720 * **[related]    API**: ``rte_eth_dev_get_reg_info()``.
721
722
723 .. _nic_features_led:
724
725 LED
726 ---
727
728 Supports turning on/off a software controllable LED on a device.
729
730 * **[implements] eth_dev_ops**: ``dev_led_on``, ``dev_led_off``.
731 * **[related]    API**: ``rte_eth_led_on()``, ``rte_eth_led_off()``.
732
733
734 .. _nic_features_multiprocess_aware:
735
736 Multiprocess aware
737 ------------------
738
739 Driver can be used for primary-secondary process model.
740
741
742 .. _nic_features_bsd_nic_uio:
743
744 BSD nic_uio
745 -----------
746
747 BSD ``nic_uio`` module supported.
748
749
750 .. _nic_features_linux_uio:
751
752 Linux UIO
753 ---------
754
755 Works with ``igb_uio`` kernel module.
756
757 * **[provides] RTE_PMD_REGISTER_KMOD_DEP**: ``igb_uio``.
758
759 .. _nic_features_linux_vfio:
760
761 Linux VFIO
762 ----------
763
764 Works with ``vfio-pci`` kernel module.
765
766 * **[provides] RTE_PMD_REGISTER_KMOD_DEP**: ``vfio-pci``.
767
768 .. _nic_features_other_kdrv:
769
770 Other kdrv
771 ----------
772
773 Kernel module other than above ones supported.
774
775
776 .. _nic_features_armv7:
777
778 ARMv7
779 -----
780
781 Support armv7 architecture.
782
783 Use ``defconfig_arm-armv7a-*-*``.
784
785
786 .. _nic_features_armv8:
787
788 ARMv8
789 -----
790
791 Support armv8a (64bit) architecture.
792
793 Use ``defconfig_arm64-armv8a-*-*``
794
795
796 .. _nic_features_power8:
797
798 Power8
799 ------
800
801 Support PowerPC architecture.
802
803 Use ``defconfig_ppc_64-power8-*-*``
804
805 .. _nic_features_x86-32:
806
807 x86-32
808 ------
809
810 Support 32bits x86 architecture.
811
812 Use ``defconfig_x86_x32-native-*-*`` and ``defconfig_i686-native-*-*``.
813
814
815 .. _nic_features_x86-64:
816
817 x86-64
818 ------
819
820 Support 64bits x86 architecture.
821
822 Use ``defconfig_x86_64-native-*-*``.
823
824
825 .. _nic_features_usage_doc:
826
827 Usage doc
828 ---------
829
830 Documentation describes usage.
831
832 See ``doc/guides/nics/*.rst``
833
834
835 .. _nic_features_design_doc:
836
837 Design doc
838 ----------
839
840 Documentation describes design.
841
842 See ``doc/guides/nics/*.rst``.
843
844
845 .. _nic_features_perf_doc:
846
847 Perf doc
848 --------
849
850 Documentation describes performance values.
851
852 See ``dpdk.org/doc/perf/*``.
853
854 .. _nic_features_runtime_rx_queue_setup:
855
856 Runtime Rx queue setup
857 ----------------------
858
859 Supports Rx queue setup after device started.
860
861 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP``.
862 * **[related]  API**: ``rte_eth_dev_info_get()``.
863
864 .. _nic_features_runtime_tx_queue_setup:
865
866 Runtime Tx queue setup
867 ----------------------
868
869 Supports Tx queue setup after device started.
870
871 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP``.
872 * **[related]  API**: ``rte_eth_dev_info_get()``.
873
874 .. _nic_features_burst_mode_info:
875
876 Burst mode info
877 ---------------
878
879 Supports to get Rx/Tx packet burst mode information.
880
881 * **[implements] eth_dev_ops**: ``rx_burst_mode_get``, ``tx_burst_mode_get``.
882 * **[related] API**: ``rte_eth_rx_burst_mode_get()``, ``rte_eth_tx_burst_mode_get()``,
883   ``rte_eth_burst_mode_option_name()``.
884
885 .. _nic_features_other:
886
887 Other dev ops not represented by a Feature
888 ------------------------------------------
889
890 * ``rxq_info_get``
891 * ``txq_info_get``
892 * ``vlan_tpid_set``
893 * ``vlan_strip_queue_set``
894 * ``vlan_pvid_set``
895 * ``rx_queue_count``
896 * ``l2_tunnel_offload_set``
897 * ``uc_hash_table_set``
898 * ``uc_all_hash_table_set``
899 * ``udp_tunnel_port_add``
900 * ``udp_tunnel_port_del``
901 * ``l2_tunnel_eth_type_conf``
902 * ``l2_tunnel_offload_set``
903 * ``tx_pkt_prepare``