cxgbe: add documentation
[dpdk.git] / doc / guides / prog_guide / source_org.rst
1 ..  BSD LICENSE
2     Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
3     All rights reserved.
4
5     Redistribution and use in source and binary forms, with or without
6     modification, are permitted provided that the following conditions
7     are met:
8
9     * Redistributions of source code must retain the above copyright
10     notice, this list of conditions and the following disclaimer.
11     * Redistributions in binary form must reproduce the above copyright
12     notice, this list of conditions and the following disclaimer in
13     the documentation and/or other materials provided with the
14     distribution.
15     * Neither the name of Intel Corporation nor the names of its
16     contributors may be used to endorse or promote products derived
17     from this software without specific prior written permission.
18
19     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
20     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
21     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
22     A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
23     OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
25     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
29     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30
31 **Part 2: Development Environment**
32
33 Source Organization
34 ===================
35
36 This section describes the organization of sources in the DPDK framework.
37
38 Makefiles and Config
39 --------------------
40
41 .. note::
42
43     In the following descriptions,
44     RTE_SDK is the environment variable that points to the base directory into which the tarball was extracted.
45     See
46     :ref:`Useful Variables Provided by the Build System <Useful_Variables_Provided_by_the_Build_System>`
47     for descriptions of other variables.
48
49 Makefiles that are provided by the DPDK libraries and applications are located in $(RTE_SDK)/mk.
50
51 Config templates are located in $(RTE_SDK)/config. The templates describe the options that are enabled for each target.
52 The config file also contains items that can be enabled and disabled for many of the DPDK libraries,
53 including debug options.
54 The user should look at the config file and become familiar with the options.
55 The config file is also used to create a header file, which will be located in the new build directory.
56
57 Libraries
58 ---------
59
60 Libraries are located in subdirectories of $(RTE_SDK)/lib.
61 By convention, we call a library any code that provides an API to an application.
62 Typically, it generates an archive file (.a), but a kernel module should also go in the same directory.
63
64 The lib directory contains::
65
66     lib
67     +-- librte_cmdline      # command line interface helper
68     +-- librte_distributor  # packet distributor
69     +-- librte_eal          # environment abstraction layer
70     +-- librte_ether        # generic interface to poll mode driver
71     +-- librte_hash         # hash library
72     +-- librte_ip_frag      # IP fragmentation library
73     +-- librte_ivshmem      # QEMU IVSHMEM library
74     +-- librte_kni          # kernel NIC interface
75     +-- librte_kvargs       # argument parsing library
76     +-- librte_lpm          # longest prefix match library
77     +-- librte_malloc       # malloc-like functions
78     +-- librte_mbuf         # packet and control mbuf manipulation library
79     +-- librte_mempool      # memory pool manager (fixedsized objects)
80     +-- librte_meter        # QoS metering library
81     +-- librte_net          # various IP-related headers
82     +-- librte_power        # power management library
83     +-- librte_ring         # software rings (act as lockless FIFOs)
84     +-- librte_sched        # QoS scheduler and dropper library
85     +-- librte_timer        # timer library
86
87 Drivers
88 -------
89
90 Drivers are special libraries which provide poll-mode driver implementations for
91 devices - either hardware devices or pseudo/virtual devices. They are contained
92 in the "drivers" subdirectory, classified by type, and each compiles to a
93 library with the format "librte_pmd_X.a" where "X" is the driver name.
94
95 The drivers directory has a net subdirectory which contains::
96
97     drivers/net
98     +-- af_packet          # poll mode driver based on linux af_packet
99     +-- bonding            # bonding poll mode driver
100     +-- cxgbe              # Chelsio Terminator 10GbE/40GbE poll mode driver
101     +-- e1000              # 1GbE poll mode drivers (igb and em)
102     +-- enic               # Cisco VIC Ethernet NIC Poll-mode Driver
103     +-- fm10k              # Host interface PMD driver for FM10000 Series
104     +-- i40e               # 40GbE poll mode driver
105     +-- ixgbe              # 10GbE poll mode driver
106     +-- mlx4               # Mellanox ConnectX-3 poll mode driver
107     +-- null               # NULL poll mode driver for testing
108     +-- pcap               # PCAP poll mode driver
109     +-- ring               # ring poll mode driver
110     +-- virtio             # virtio poll mode driver
111     +-- vmxnet3            # VMXNET3 poll mode driver
112     +-- xenvirt            # Xen virtio poll mode driver
113
114 Applications
115 ------------
116
117 Applications are sources that contain a main() function.
118 They are located in the $(RTE_SDK)/app and $(RTE_SDK)/examples directories.
119
120 The app directory contains sample applications that are used to test the DPDK (autotests).
121 The examples directory contains sample applications that show how libraries can be used.
122
123 ::
124
125     app
126     +-- chkincs            # test prog to check include depends
127     +-- test               # autotests, to validate DPDK features
128     `-- test-pmd           # test and bench poll mode driver examples
129
130     examples
131     +-- cmdline            # Example of using cmdline library
132     +-- dpdk_qat           # Example showing integration with Intel QuickAssist
133     +-- exception_path     # Sending packets to and from Linux Ethernet device (TAP)
134     +-- helloworld         # Helloworld basic example
135     +-- ip_reassembly      # Example showing IP Reassembly
136     +-- ip_fragmentation   # Example showing IPv4 Fragmentation
137     +-- ipv4_multicast     # Example showing IPv4 Multicast
138     +-- kni                # Kernel NIC Interface example
139     +-- l2fwd              # L2 Forwarding example with and without SR-IOV
140     +-- l3fwd              # L3 Forwarding example
141     +-- l3fwd-power        # L3 Forwarding example with power management
142     +-- l3fwd-vf           # L3 Forwarding example with SR-IOV
143     +-- link_status_interrupt # Link status change interrupt example
144     +-- load_balancer      # Load balancing across multiple cores/sockets
145     +-- multi_process      # Example applications with multiple DPDK processes
146     +-- qos_meter          # QoS metering example
147     +-- qos_sched          # QoS scheduler and dropper example
148     +-- timer              # Example of using librte_timer library
149     +-- vmdq_dcb           # Intel 82599 Ethernet Controller VMDQ and DCB receiving
150     +-- vmdq               # Example of VMDQ receiving for both Intel 10G (82599) and 1G (82576, 82580 and I350) Ethernet Controllers
151     `-- vhost              # Example of userspace vhost and switch
152
153 .. note::
154
155     The actual examples directory may contain additional sample applications to those shown above.
156     Check the latest DPDK source files for details.