4 .. **Read this first.**
6 The text in the sections below explains how to update the release notes.
8 Use proper spelling, capitalization and punctuation in all sections.
10 Variable and config names should be quoted as fixed width text:
13 Build the docs and view the output file to ensure the changes are correct::
17 xdg-open build/doc/html/guides/rel_notes/release_17_11.html
23 .. This section should contain new features added in this release. Sample
26 * **Add a title in the past tense with a full stop.**
28 Add a short 1-2 sentence description in the past tense. The description
29 should be enough to allow someone scanning the release notes to
30 understand the new feature.
32 If the feature adds a lot of sub-features you can use a bullet list like
35 * Added feature foo to do something.
36 * Enhanced feature bar to do something else.
38 Refer to the previous release notes for examples.
40 This section is a comment. do not overwrite or remove it.
41 Also, make sure to start the actual text at the margin.
42 =========================================================
44 * **Extended port_id range from uint8_t to uint16_t.**
46 Increased port_id range from 8 bits to 16 bits in order to support more than
47 256 ports in dpdk. All ethdev APIs which have port_id as parameter are changed
50 * **Modified the return type of rte_eth_stats_reset.**
52 Changed return type of ``rte_eth_stats_reset`` from ``void`` to ``int``
53 so the caller may know whether a device supports the operation or not
54 and if the operation was carried out.
56 * **Added a new driver for Marvell Armada 7k/8k devices.**
58 Added the new mrvl net driver for Marvell Armada 7k/8k devices. See the
59 "Network Interface Controller Drivers" document for more details on this new
62 * **Added SoftNIC PMD.**
64 Added new SoftNIC PMD. This virtual device offers applications a software
65 fallback support for traffic management.
67 * **nfp: Added PF support.**
69 Previously Netronome's NFP PMD had just support for VFs. PF support is
70 just as a basic DPDK port and has no VF management yet.
72 PF support comes with firmware upload support which allows the PMD to
73 independently work from kernel netdev NFP drivers.
75 NFP 4000 devices are also now supported along with previous 6000 devices.
77 * **Updated bnxt PMD.**
79 Major enhancements include:
81 * Support for Flow API
82 * Support for Tx and Rx descriptor status functions
84 * **Updated QAT crypto PMD.**
86 Performance enhancements:
88 * Removed atomics from the internal queue pair structure.
90 * **Added IOMMU support to libvhost-user**
92 Implemented device IOTLB in Vhost-user backend, and enabled Virtio's IOMMU
95 * **Added Membership library (rte_member).**
97 Added membership library. It provides an API for DPDK applications to insert a
98 new member, delete an existing member, or query the existence of a member in a
99 given set, or a group of sets. For the case of a group of sets the library
100 will return not only whether the element has been inserted before in one of
101 the sets but also which set it belongs to.
103 The Membership Library is an extension and generalization of a traditional
104 filter (for example Bloom Filter) structure that has multiple usages in a wide
105 variety of workloads and applications. In general, the Membership Library is a
106 data structure that provides a “set-summary” and responds to set-membership
107 queries whether a certain member belongs to a set(s).
109 See the :ref:`Membership Library <Member_Library>` documentation in
110 the Programmers Guide document, for more information.
112 * **Added the Generic Segmentation Offload Library.**
114 Added the Generic Segmentation Offload (GSO) library to enable
115 applications to split large packets (e.g. MTU is 64KB) into small
116 ones (e.g. MTU is 1500B). Supported packet types are:
119 * VxLAN packets, which must have an outer IPv4 header, and contain
120 an inner TCP/IPv4 packet.
121 * GRE packets, which must contain an outer IPv4 header, and inner
124 The GSO library doesn't check if the input packets have correct
125 checksums, and doesn't update checksums for output packets.
126 Additionally, the GSO library doesn't process IP fragmented packets.
132 .. This section should contain bug fixes added to the relevant
133 sections. Sample format:
135 * **code/section Fixed issue in the past tense with a full stop.**
137 Add a short 1-2 sentence description of the resolved issue in the past
140 The title should contain the code/lib section like a commit message.
142 Add the entries in alphabetic order in the relevant sections below.
144 This section is a comment. do not overwrite or remove it.
145 Also, make sure to start the actual text at the margin.
146 =========================================================
152 * **Service core fails to call service callback due to atomic lock**
154 In a specific configuration of multi-thread unsafe services and service
155 cores, a service core previously did not correctly release the atomic lock
156 on the service. This would result in the cores polling the service, but it
157 looked like another thread was executing the service callback. The logic for
158 atomic locking of the services has been fixed and refactored for readability.
179 .. This section should contain new known issues in this release. Sample format:
181 * **Add title in present tense with full stop.**
183 Add a short 1-2 sentence description of the known issue in the present
184 tense. Add information on any known workarounds.
186 This section is a comment. do not overwrite or remove it.
187 Also, make sure to start the actual text at the margin.
188 =========================================================
194 .. This section should contain API changes. Sample format:
196 * Add a short 1-2 sentence description of the API change. Use fixed width
197 quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
200 This section is a comment. do not overwrite or remove it.
201 Also, make sure to start the actual text at the margin.
202 =========================================================
204 * **Ethdev device name length increased**
206 The size of internal device name is increased to 64 characters
207 to allow for storing longer bus specific name.
209 * **Service cores API updated for usability**
211 The service cores API has been changed, removing pointers from the API
212 where possible, instead using integer IDs to identify each service. This
213 simplifed application code, aids debugging, and provides better
214 encapsulation. A summary of the main changes made is as follows:
216 * Services identified by ID not by ``rte_service_spec`` pointer
217 * Reduced API surface by using ``set`` functions instead of enable/disable
218 * Reworked ``rte_service_register`` to provide the service ID to registrar
219 * Rework start and stop APIs into ``rte_service_runstate_set``
220 * Added API to set runstate of service implementation to indicate readyness
222 * **The following changes made in mempool library**
224 * Moved ``flags`` datatype from int to unsigned int for ``rte_mempool``.
225 * Removed ``__rte_unused int flag`` param from ``rte_mempool_generic_put``
226 and ``rte_mempool_generic_get`` API.
227 * Added ``flags`` param in ``rte_mempool_xmem_size`` and
228 ``rte_mempool_xmem_usage``.
230 * Xen dom0 in EAL was removed, as well as xenvirt PMD and vhost_xen.
232 * ``rte_mem_phy2mch`` was used in Xen dom0 to obtain the physical address;
233 remove this API as Xen dom0 support was removed.
235 * **Add return value to stats_get dev op API**
237 The ``stats_get`` dev op API return value has been changed to be int.
238 By this way PMDs can return an error value in case of failure at stats
239 getting process time.
241 * **Modified the rte_cryptodev_allocate_driver function in the cryptodev library.**
243 The function ``rte_cryptodev_allocate_driver()`` has been modified.
244 An extra parameter ``struct cryptodev_driver *crypto_drv`` has been added.
250 .. This section should contain ABI changes. Sample format:
252 * Add a short 1-2 sentence description of the ABI change that was announced
253 in the previous releases and made in this release. Use fixed width quotes
254 for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
256 This section is a comment. do not overwrite or remove it.
257 Also, make sure to start the actual text at the margin.
258 =========================================================
260 * **Extended port_id range.**
262 The size of the field ``port_id`` in the ``rte_eth_dev_data`` structure
263 changed, as described in the `New Features` section.
265 Shared Library Versions
266 -----------------------
268 .. Update any library version updated in this release and prepend with a ``+``
272 + librte_cfgfile.so.2
275 This section is a comment. do not overwrite or remove it.
276 =========================================================
279 The libraries prepended with a plus sign were incremented in this version.
284 librte_bitratestats.so.2
287 librte_cryptodev.so.3
288 librte_distributor.so.1
299 librte_latencystats.so.1
311 librte_pmd_ixgbe.so.2
313 + librte_pmd_softnic.so.1
314 librte_pmd_vhost.so.2
328 .. This section should contain a list of platforms that were tested with this
333 * <vendor> platform with <vendor> <type of devices> combinations
338 * Other relevant details...
340 This section is a comment. do not overwrite or remove it.
341 Also, make sure to start the actual text at the margin.
342 =========================================================