drivers/common/mlx5/mlx5_devx_cmds.c

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /* Copyright 2018 Mellanox Technologies, Ltd */
   3
   4 #include <unistd.h>
   5
   6 #include <rte_errno.h>
   7 #include <rte_malloc.h>
   8
   9 #include "mlx5_prm.h"
  10 #include "mlx5_devx_cmds.h"
  11 #include "mlx5_common_utils.h"
  12
  13
  14 /**
  15  * Allocate flow counters via devx interface.
  16  *
  17  * @param[in] ctx
  18  *   ibv contexts returned from mlx5dv_open_device.
  19  * @param dcs
  20  *   Pointer to counters properties structure to be filled by the routine.
  21  * @param bulk_n_128
  22  *   Bulk counter numbers in 128 counters units.
  23  *
  24  * @return
  25  *   Pointer to counter object on success, a negative value otherwise and
  26  *   rte_errno is set.
  27  */
  28 struct mlx5_devx_obj *
  29 mlx5_devx_cmd_flow_counter_alloc(struct ibv_context *ctx, uint32_t bulk_n_128)
  30 {
  31         struct mlx5_devx_obj *dcs = rte_zmalloc("dcs", sizeof(*dcs), 0);
  32         uint32_t in[MLX5_ST_SZ_DW(alloc_flow_counter_in)]   = {0};
  33         uint32_t out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0};
  34
  35         if (!dcs) {
  36                 rte_errno = ENOMEM;
  37                 return NULL;
  38         }
  39         MLX5_SET(alloc_flow_counter_in, in, opcode,
  40                  MLX5_CMD_OP_ALLOC_FLOW_COUNTER);
  41         MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, bulk_n_128);
  42         dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
  43                                               sizeof(in), out, sizeof(out));
  44         if (!dcs->obj) {
  45                 DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
  46                 rte_errno = errno;
  47                 rte_free(dcs);
  48                 return NULL;
  49         }
  50         dcs->id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id);
  51         return dcs;
  52 }
  53
  54 /**
  55  * Query flow counters values.
  56  *
  57  * @param[in] dcs
  58  *   devx object that was obtained from mlx5_devx_cmd_fc_alloc.
  59  * @param[in] clear
  60  *   Whether hardware should clear the counters after the query or not.
  61  * @param[in] n_counters
  62  *   0 in case of 1 counter to read, otherwise the counter number to read.
  63  *  @param pkts
  64  *   The number of packets that matched the flow.
  65  *  @param bytes
  66  *    The number of bytes that matched the flow.
  67  *  @param mkey
  68  *   The mkey key for batch query.
  69  *  @param addr
  70  *    The address in the mkey range for batch query.
  71  *  @param cmd_comp
  72  *   The completion object for asynchronous batch query.
  73  *  @param async_id
  74  *    The ID to be returned in the asynchronous batch query response.
  75  *
  76  * @return
  77  *   0 on success, a negative value otherwise.
  78  */
  79 int
  80 mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
  81                                  int clear, uint32_t n_counters,
  82                                  uint64_t *pkts, uint64_t *bytes,
  83                                  uint32_t mkey, void *addr,
  84                                  struct mlx5dv_devx_cmd_comp *cmd_comp,
  85                                  uint64_t async_id)
  86 {
  87         int out_len = MLX5_ST_SZ_BYTES(query_flow_counter_out) +
  88                         MLX5_ST_SZ_BYTES(traffic_counter);
  89         uint32_t out[out_len];
  90         uint32_t in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
  91         void *stats;
  92         int rc;
  93
  94         MLX5_SET(query_flow_counter_in, in, opcode,
  95                  MLX5_CMD_OP_QUERY_FLOW_COUNTER);
  96         MLX5_SET(query_flow_counter_in, in, op_mod, 0);
  97         MLX5_SET(query_flow_counter_in, in, flow_counter_id, dcs->id);
  98         MLX5_SET(query_flow_counter_in, in, clear, !!clear);
  99
 100         if (n_counters) {
 101                 MLX5_SET(query_flow_counter_in, in, num_of_counters,
 102                          n_counters);
 103                 MLX5_SET(query_flow_counter_in, in, dump_to_memory, 1);
 104                 MLX5_SET(query_flow_counter_in, in, mkey, mkey);
 105                 MLX5_SET64(query_flow_counter_in, in, address,
 106                            (uint64_t)(uintptr_t)addr);
 107         }
 108         if (!cmd_comp)
 109                 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out,
 110                                                out_len);
 111         else
 112                 rc = mlx5_glue->devx_obj_query_async(dcs->obj, in, sizeof(in),
 113                                                      out_len, async_id,
 114                                                      cmd_comp);
 115         if (rc) {
 116                 DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc);
 117                 rte_errno = rc;
 118                 return -rc;
 119         }
 120         if (!n_counters) {
 121                 stats = MLX5_ADDR_OF(query_flow_counter_out,
 122                                      out, flow_statistics);
 123                 *pkts = MLX5_GET64(traffic_counter, stats, packets);
 124                 *bytes = MLX5_GET64(traffic_counter, stats, octets);
 125         }
 126         return 0;
 127 }
 128
 129 /**
 130  * Create a new mkey.
 131  *
 132  * @param[in] ctx
 133  *   ibv contexts returned from mlx5dv_open_device.
 134  * @param[in] attr
 135  *   Attributes of the requested mkey.
 136  *
 137  * @return
 138  *   Pointer to Devx mkey on success, a negative value otherwise and rte_errno
 139  *   is set.
 140  */
 141 struct mlx5_devx_obj *
 142 mlx5_devx_cmd_mkey_create(struct ibv_context *ctx,
 143                           struct mlx5_devx_mkey_attr *attr)
 144 {
 145         struct mlx5_klm *klm_array = attr->klm_array;
 146         int klm_num = attr->klm_num;
 147         int in_size_dw = MLX5_ST_SZ_DW(create_mkey_in) +
 148                      (klm_num ? RTE_ALIGN(klm_num, 4) : 0) * MLX5_ST_SZ_DW(klm);
 149         uint32_t in[in_size_dw];
 150         uint32_t out[MLX5_ST_SZ_DW(create_mkey_out)] = {0};
 151         void *mkc;
 152         struct mlx5_devx_obj *mkey = rte_zmalloc("mkey", sizeof(*mkey), 0);
 153         size_t pgsize;
 154         uint32_t translation_size;
 155
 156         if (!mkey) {
 157                 rte_errno = ENOMEM;
 158                 return NULL;
 159         }
 160         memset(in, 0, in_size_dw * 4);
 161         pgsize = sysconf(_SC_PAGESIZE);
 162         MLX5_SET(create_mkey_in, in, opcode, MLX5_CMD_OP_CREATE_MKEY);
 163         mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
 164         if (klm_num > 0) {
 165                 int i;
 166                 uint8_t *klm = (uint8_t *)MLX5_ADDR_OF(create_mkey_in, in,
 167                                                        klm_pas_mtt);
 168                 translation_size = RTE_ALIGN(klm_num, 4);
 169                 for (i = 0; i < klm_num; i++) {
 170                         MLX5_SET(klm, klm, byte_count, klm_array[i].byte_count);
 171                         MLX5_SET(klm, klm, mkey, klm_array[i].mkey);
 172                         MLX5_SET64(klm, klm, address, klm_array[i].address);
 173                         klm += MLX5_ST_SZ_BYTES(klm);
 174                 }
 175                 for (; i < (int)translation_size; i++) {
 176                         MLX5_SET(klm, klm, mkey, 0x0);
 177                         MLX5_SET64(klm, klm, address, 0x0);
 178                         klm += MLX5_ST_SZ_BYTES(klm);
 179                 }
 180                 MLX5_SET(mkc, mkc, access_mode_1_0, attr->log_entity_size ?
 181                          MLX5_MKC_ACCESS_MODE_KLM_FBS :
 182                          MLX5_MKC_ACCESS_MODE_KLM);
 183                 MLX5_SET(mkc, mkc, log_page_size, attr->log_entity_size);
 184         } else {
 185                 translation_size = (RTE_ALIGN(attr->size, pgsize) * 8) / 16;
 186                 MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
 187                 MLX5_SET(mkc, mkc, log_page_size, rte_log2_u32(pgsize));
 188         }
 189         MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
 190                  translation_size);
 191         MLX5_SET(create_mkey_in, in, mkey_umem_id, attr->umem_id);
 192         MLX5_SET(create_mkey_in, in, pg_access, attr->pg_access);
 193         MLX5_SET(mkc, mkc, lw, 0x1);
 194         MLX5_SET(mkc, mkc, lr, 0x1);
 195         MLX5_SET(mkc, mkc, qpn, 0xffffff);
 196         MLX5_SET(mkc, mkc, pd, attr->pd);
 197         MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
 198         MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
 199         if (attr->relaxed_ordering == 1) {
 200                 MLX5_SET(mkc, mkc, relaxed_ordering_write, 0x1);
 201                 MLX5_SET(mkc, mkc, relaxed_ordering_read, 0x1);
 202         }
 203         MLX5_SET64(mkc, mkc, start_addr, attr->addr);
 204         MLX5_SET64(mkc, mkc, len, attr->size);
 205         mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out,
 206                                                sizeof(out));
 207         if (!mkey->obj) {
 208                 DRV_LOG(ERR, "Can't create %sdirect mkey - error %d\n",
 209                         klm_num ? "an in" : "a ", errno);
 210                 rte_errno = errno;
 211                 rte_free(mkey);
 212                 return NULL;
 213         }
 214         mkey->id = MLX5_GET(create_mkey_out, out, mkey_index);
 215         mkey->id = (mkey->id << 8) | (attr->umem_id & 0xFF);
 216         return mkey;
 217 }
 218
 219 /**
 220  * Get status of devx command response.
 221  * Mainly used for asynchronous commands.
 222  *
 223  * @param[in] out
 224  *   The out response buffer.
 225  *
 226  * @return
 227  *   0 on success, non-zero value otherwise.
 228  */
 229 int
 230 mlx5_devx_get_out_command_status(void *out)
 231 {
 232         int status;
 233
 234         if (!out)
 235                 return -EINVAL;
 236         status = MLX5_GET(query_flow_counter_out, out, status);
 237         if (status) {
 238                 int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome);
 239
 240                 DRV_LOG(ERR, "Bad devX status %x, syndrome = %x", status,
 241                         syndrome);
 242         }
 243         return status;
 244 }
 245
 246 /**
 247  * Destroy any object allocated by a Devx API.
 248  *
 249  * @param[in] obj
 250  *   Pointer to a general object.
 251  *
 252  * @return
 253  *   0 on success, a negative value otherwise.
 254  */
 255 int
 256 mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj)
 257 {
 258         int ret;
 259
 260         if (!obj)
 261                 return 0;
 262         ret =  mlx5_glue->devx_obj_destroy(obj->obj);
 263         rte_free(obj);
 264         return ret;
 265 }
 266
 267 /**
 268  * Query NIC vport context.
 269  * Fills minimal inline attribute.
 270  *
 271  * @param[in] ctx
 272  *   ibv contexts returned from mlx5dv_open_device.
 273  * @param[in] vport
 274  *   vport index
 275  * @param[out] attr
 276  *   Attributes device values.
 277  *
 278  * @return
 279  *   0 on success, a negative value otherwise.
 280  */
 281 static int
 282 mlx5_devx_cmd_query_nic_vport_context(struct ibv_context *ctx,
 283                                       unsigned int vport,
 284                                       struct mlx5_hca_attr *attr)
 285 {
 286         uint32_t in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
 287         uint32_t out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0};
 288         void *vctx;
 289         int status, syndrome, rc;
 290
 291         /* Query NIC vport context to determine inline mode. */
 292         MLX5_SET(query_nic_vport_context_in, in, opcode,
 293                  MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
 294         MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
 295         if (vport)
 296                 MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
 297         rc = mlx5_glue->devx_general_cmd(ctx,
 298                                          in, sizeof(in),
 299                                          out, sizeof(out));
 300         if (rc)
 301                 goto error;
 302         status = MLX5_GET(query_nic_vport_context_out, out, status);
 303         syndrome = MLX5_GET(query_nic_vport_context_out, out, syndrome);
 304         if (status) {
 305                 DRV_LOG(DEBUG, "Failed to query NIC vport context, "
 306                         "status %x, syndrome = %x",
 307                         status, syndrome);
 308                 return -1;
 309         }
 310         vctx = MLX5_ADDR_OF(query_nic_vport_context_out, out,
 311                             nic_vport_context);
 312         attr->vport_inline_mode = MLX5_GET(nic_vport_context, vctx,
 313                                            min_wqe_inline_mode);
 314         return 0;
 315 error:
 316         rc = (rc > 0) ? -rc : rc;
 317         return rc;
 318 }
 319
 320 /**
 321  * Query NIC vDPA attributes.
 322  *
 323  * @param[in] ctx
 324  *   ibv contexts returned from mlx5dv_open_device.
 325  * @param[out] vdpa_attr
 326  *   vDPA Attributes structure to fill.
 327  */
 328 static void
 329 mlx5_devx_cmd_query_hca_vdpa_attr(struct ibv_context *ctx,
 330                                   struct mlx5_hca_vdpa_attr *vdpa_attr)
 331 {
 332         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 333         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 334         void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 335         int status, syndrome, rc;
 336
 337         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 338         MLX5_SET(query_hca_cap_in, in, op_mod,
 339                  MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION |
 340                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 341         rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
 342         status = MLX5_GET(query_hca_cap_out, out, status);
 343         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 344         if (rc || status) {
 345                 RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities,"
 346                         " status %x, syndrome = %x", status, syndrome);
 347                 vdpa_attr->valid = 0;
 348         } else {
 349                 vdpa_attr->valid = 1;
 350                 vdpa_attr->desc_tunnel_offload_type =
 351                         MLX5_GET(virtio_emulation_cap, hcattr,
 352                                  desc_tunnel_offload_type);
 353                 vdpa_attr->eth_frame_offload_type =
 354                         MLX5_GET(virtio_emulation_cap, hcattr,
 355                                  eth_frame_offload_type);
 356                 vdpa_attr->virtio_version_1_0 =
 357                         MLX5_GET(virtio_emulation_cap, hcattr,
 358                                  virtio_version_1_0);
 359                 vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr,
 360                                                tso_ipv4);
 361                 vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr,
 362                                                tso_ipv6);
 363                 vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 364                                               tx_csum);
 365                 vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 366                                               rx_csum);
 367                 vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr,
 368                                                  event_mode);
 369                 vdpa_attr->virtio_queue_type =
 370                         MLX5_GET(virtio_emulation_cap, hcattr,
 371                                  virtio_queue_type);
 372                 vdpa_attr->log_doorbell_stride =
 373                         MLX5_GET(virtio_emulation_cap, hcattr,
 374                                  log_doorbell_stride);
 375                 vdpa_attr->log_doorbell_bar_size =
 376                         MLX5_GET(virtio_emulation_cap, hcattr,
 377                                  log_doorbell_bar_size);
 378                 vdpa_attr->doorbell_bar_offset =
 379                         MLX5_GET64(virtio_emulation_cap, hcattr,
 380                                    doorbell_bar_offset);
 381                 vdpa_attr->max_num_virtio_queues =
 382                         MLX5_GET(virtio_emulation_cap, hcattr,
 383                                  max_num_virtio_queues);
 384                 vdpa_attr->umems[0].a = MLX5_GET(virtio_emulation_cap, hcattr,
 385                                                  umem_1_buffer_param_a);
 386                 vdpa_attr->umems[0].b = MLX5_GET(virtio_emulation_cap, hcattr,
 387                                                  umem_1_buffer_param_b);
 388                 vdpa_attr->umems[1].a = MLX5_GET(virtio_emulation_cap, hcattr,
 389                                                  umem_2_buffer_param_a);
 390                 vdpa_attr->umems[1].b = MLX5_GET(virtio_emulation_cap, hcattr,
 391                                                  umem_2_buffer_param_b);
 392                 vdpa_attr->umems[2].a = MLX5_GET(virtio_emulation_cap, hcattr,
 393                                                  umem_3_buffer_param_a);
 394                 vdpa_attr->umems[2].b = MLX5_GET(virtio_emulation_cap, hcattr,
 395                                                  umem_3_buffer_param_b);
 396         }
 397 }
 398
 399 /**
 400  * Query HCA attributes.
 401  * Using those attributes we can check on run time if the device
 402  * is having the required capabilities.
 403  *
 404  * @param[in] ctx
 405  *   ibv contexts returned from mlx5dv_open_device.
 406  * @param[out] attr
 407  *   Attributes device values.
 408  *
 409  * @return
 410  *   0 on success, a negative value otherwise.
 411  */
 412 int
 413 mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
 414                              struct mlx5_hca_attr *attr)
 415 {
 416         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 417         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 418         void *hcattr;
 419         int status, syndrome, rc;
 420
 421         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 422         MLX5_SET(query_hca_cap_in, in, op_mod,
 423                  MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
 424                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 425
 426         rc = mlx5_glue->devx_general_cmd(ctx,
 427                                          in, sizeof(in), out, sizeof(out));
 428         if (rc)
 429                 goto error;
 430         status = MLX5_GET(query_hca_cap_out, out, status);
 431         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 432         if (status) {
 433                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 434                         "status %x, syndrome = %x",
 435                         status, syndrome);
 436                 return -1;
 437         }
 438         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 439         attr->flow_counter_bulk_alloc_bitmap =
 440                         MLX5_GET(cmd_hca_cap, hcattr, flow_counter_bulk_alloc);
 441         attr->flow_counters_dump = MLX5_GET(cmd_hca_cap, hcattr,
 442                                             flow_counters_dump);
 443         attr->log_max_rqt_size = MLX5_GET(cmd_hca_cap, hcattr,
 444                                           log_max_rqt_size);
 445         attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager);
 446         attr->hairpin = MLX5_GET(cmd_hca_cap, hcattr, hairpin);
 447         attr->log_max_hairpin_queues = MLX5_GET(cmd_hca_cap, hcattr,
 448                                                 log_max_hairpin_queues);
 449         attr->log_max_hairpin_wq_data_sz = MLX5_GET(cmd_hca_cap, hcattr,
 450                                                     log_max_hairpin_wq_data_sz);
 451         attr->log_max_hairpin_num_packets = MLX5_GET
 452                 (cmd_hca_cap, hcattr, log_min_hairpin_wq_data_sz);
 453         attr->vhca_id = MLX5_GET(cmd_hca_cap, hcattr, vhca_id);
 454         attr->eth_net_offloads = MLX5_GET(cmd_hca_cap, hcattr,
 455                                           eth_net_offloads);
 456         attr->eth_virt = MLX5_GET(cmd_hca_cap, hcattr, eth_virt);
 457         attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr,
 458                                                flex_parser_protocols);
 459         attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos);
 460         attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 461                                          general_obj_types) &
 462                               MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q);
 463         if (attr->qos.sup) {
 464                 MLX5_SET(query_hca_cap_in, in, op_mod,
 465                          MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
 466                          MLX5_HCA_CAP_OPMOD_GET_CUR);
 467                 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in),
 468                                                  out, sizeof(out));
 469                 if (rc)
 470                         goto error;
 471                 if (status) {
 472                         DRV_LOG(DEBUG, "Failed to query devx QOS capabilities,"
 473                                 " status %x, syndrome = %x",
 474                                 status, syndrome);
 475                         return -1;
 476                 }
 477                 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 478                 attr->qos.srtcm_sup =
 479                                 MLX5_GET(qos_cap, hcattr, flow_meter_srtcm);
 480                 attr->qos.log_max_flow_meter =
 481                                 MLX5_GET(qos_cap, hcattr, log_max_flow_meter);
 482                 attr->qos.flow_meter_reg_c_ids =
 483                         MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
 484                 attr->qos.flow_meter_reg_share =
 485                         MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
 486         }
 487         if (attr->vdpa.valid)
 488                 mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
 489         if (!attr->eth_net_offloads)
 490                 return 0;
 491
 492         /* Query HCA offloads for Ethernet protocol. */
 493         memset(in, 0, sizeof(in));
 494         memset(out, 0, sizeof(out));
 495         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 496         MLX5_SET(query_hca_cap_in, in, op_mod,
 497                  MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS |
 498                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 499
 500         rc = mlx5_glue->devx_general_cmd(ctx,
 501                                          in, sizeof(in),
 502                                          out, sizeof(out));
 503         if (rc) {
 504                 attr->eth_net_offloads = 0;
 505                 goto error;
 506         }
 507         status = MLX5_GET(query_hca_cap_out, out, status);
 508         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 509         if (status) {
 510                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 511                         "status %x, syndrome = %x",
 512                         status, syndrome);
 513                 attr->eth_net_offloads = 0;
 514                 return -1;
 515         }
 516         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 517         attr->wqe_vlan_insert = MLX5_GET(per_protocol_networking_offload_caps,
 518                                          hcattr, wqe_vlan_insert);
 519         attr->lro_cap = MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 520                                  lro_cap);
 521         attr->tunnel_lro_gre = MLX5_GET(per_protocol_networking_offload_caps,
 522                                         hcattr, tunnel_lro_gre);
 523         attr->tunnel_lro_vxlan = MLX5_GET(per_protocol_networking_offload_caps,
 524                                           hcattr, tunnel_lro_vxlan);
 525         attr->lro_max_msg_sz_mode = MLX5_GET
 526                                         (per_protocol_networking_offload_caps,
 527                                          hcattr, lro_max_msg_sz_mode);
 528         for (int i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
 529                 attr->lro_timer_supported_periods[i] =
 530                         MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 531                                  lro_timer_supported_periods[i]);
 532         }
 533         attr->tunnel_stateless_geneve_rx =
 534                             MLX5_GET(per_protocol_networking_offload_caps,
 535                                      hcattr, tunnel_stateless_geneve_rx);
 536         attr->geneve_max_opt_len =
 537                     MLX5_GET(per_protocol_networking_offload_caps,
 538                              hcattr, max_geneve_opt_len);
 539         attr->wqe_inline_mode = MLX5_GET(per_protocol_networking_offload_caps,
 540                                          hcattr, wqe_inline_mode);
 541         attr->tunnel_stateless_gtp = MLX5_GET
 542                                         (per_protocol_networking_offload_caps,
 543                                          hcattr, tunnel_stateless_gtp);
 544         if (attr->wqe_inline_mode != MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
 545                 return 0;
 546         if (attr->eth_virt) {
 547                 rc = mlx5_devx_cmd_query_nic_vport_context(ctx, 0, attr);
 548                 if (rc) {
 549                         attr->eth_virt = 0;
 550                         goto error;
 551                 }
 552         }
 553         return 0;
 554 error:
 555         rc = (rc > 0) ? -rc : rc;
 556         return rc;
 557 }
 558
 559 /**
 560  * Query TIS transport domain from QP verbs object using DevX API.
 561  *
 562  * @param[in] qp
 563  *   Pointer to verbs QP returned by ibv_create_qp .
 564  * @param[in] tis_num
 565  *   TIS number of TIS to query.
 566  * @param[out] tis_td
 567  *   Pointer to TIS transport domain variable, to be set by the routine.
 568  *
 569  * @return
 570  *   0 on success, a negative value otherwise.
 571  */
 572 int
 573 mlx5_devx_cmd_qp_query_tis_td(struct ibv_qp *qp, uint32_t tis_num,
 574                               uint32_t *tis_td)
 575 {
 576         uint32_t in[MLX5_ST_SZ_DW(query_tis_in)] = {0};
 577         uint32_t out[MLX5_ST_SZ_DW(query_tis_out)] = {0};
 578         int rc;
 579         void *tis_ctx;
 580
 581         MLX5_SET(query_tis_in, in, opcode, MLX5_CMD_OP_QUERY_TIS);
 582         MLX5_SET(query_tis_in, in, tisn, tis_num);
 583         rc = mlx5_glue->devx_qp_query(qp, in, sizeof(in), out, sizeof(out));
 584         if (rc) {
 585                 DRV_LOG(ERR, "Failed to query QP using DevX");
 586                 return -rc;
 587         };
 588         tis_ctx = MLX5_ADDR_OF(query_tis_out, out, tis_context);
 589         *tis_td = MLX5_GET(tisc, tis_ctx, transport_domain);
 590         return 0;
 591 }
 592
 593 /**
 594  * Fill WQ data for DevX API command.
 595  * Utility function for use when creating DevX objects containing a WQ.
 596  *
 597  * @param[in] wq_ctx
 598  *   Pointer to WQ context to fill with data.
 599  * @param [in] wq_attr
 600  *   Pointer to WQ attributes structure to fill in WQ context.
 601  */
 602 static void
 603 devx_cmd_fill_wq_data(void *wq_ctx, struct mlx5_devx_wq_attr *wq_attr)
 604 {
 605         MLX5_SET(wq, wq_ctx, wq_type, wq_attr->wq_type);
 606         MLX5_SET(wq, wq_ctx, wq_signature, wq_attr->wq_signature);
 607         MLX5_SET(wq, wq_ctx, end_padding_mode, wq_attr->end_padding_mode);
 608         MLX5_SET(wq, wq_ctx, cd_slave, wq_attr->cd_slave);
 609         MLX5_SET(wq, wq_ctx, hds_skip_first_sge, wq_attr->hds_skip_first_sge);
 610         MLX5_SET(wq, wq_ctx, log2_hds_buf_size, wq_attr->log2_hds_buf_size);
 611         MLX5_SET(wq, wq_ctx, page_offset, wq_attr->page_offset);
 612         MLX5_SET(wq, wq_ctx, lwm, wq_attr->lwm);
 613         MLX5_SET(wq, wq_ctx, pd, wq_attr->pd);
 614         MLX5_SET(wq, wq_ctx, uar_page, wq_attr->uar_page);
 615         MLX5_SET64(wq, wq_ctx, dbr_addr, wq_attr->dbr_addr);
 616         MLX5_SET(wq, wq_ctx, hw_counter, wq_attr->hw_counter);
 617         MLX5_SET(wq, wq_ctx, sw_counter, wq_attr->sw_counter);
 618         MLX5_SET(wq, wq_ctx, log_wq_stride, wq_attr->log_wq_stride);
 619         MLX5_SET(wq, wq_ctx, log_wq_pg_sz, wq_attr->log_wq_pg_sz);
 620         MLX5_SET(wq, wq_ctx, log_wq_sz, wq_attr->log_wq_sz);
 621         MLX5_SET(wq, wq_ctx, dbr_umem_valid, wq_attr->dbr_umem_valid);
 622         MLX5_SET(wq, wq_ctx, wq_umem_valid, wq_attr->wq_umem_valid);
 623         MLX5_SET(wq, wq_ctx, log_hairpin_num_packets,
 624                  wq_attr->log_hairpin_num_packets);
 625         MLX5_SET(wq, wq_ctx, log_hairpin_data_sz, wq_attr->log_hairpin_data_sz);
 626         MLX5_SET(wq, wq_ctx, single_wqe_log_num_of_strides,
 627                  wq_attr->single_wqe_log_num_of_strides);
 628         MLX5_SET(wq, wq_ctx, two_byte_shift_en, wq_attr->two_byte_shift_en);
 629         MLX5_SET(wq, wq_ctx, single_stride_log_num_of_bytes,
 630                  wq_attr->single_stride_log_num_of_bytes);
 631         MLX5_SET(wq, wq_ctx, dbr_umem_id, wq_attr->dbr_umem_id);
 632         MLX5_SET(wq, wq_ctx, wq_umem_id, wq_attr->wq_umem_id);
 633         MLX5_SET64(wq, wq_ctx, wq_umem_offset, wq_attr->wq_umem_offset);
 634 }
 635
 636 /**
 637  * Create RQ using DevX API.
 638  *
 639  * @param[in] ctx
 640  *   ibv_context returned from mlx5dv_open_device.
 641  * @param [in] rq_attr
 642  *   Pointer to create RQ attributes structure.
 643  * @param [in] socket
 644  *   CPU socket ID for allocations.
 645  *
 646  * @return
 647  *   The DevX object created, NULL otherwise and rte_errno is set.
 648  */
 649 struct mlx5_devx_obj *
 650 mlx5_devx_cmd_create_rq(struct ibv_context *ctx,
 651                         struct mlx5_devx_create_rq_attr *rq_attr,
 652                         int socket)
 653 {
 654         uint32_t in[MLX5_ST_SZ_DW(create_rq_in)] = {0};
 655         uint32_t out[MLX5_ST_SZ_DW(create_rq_out)] = {0};
 656         void *rq_ctx, *wq_ctx;
 657         struct mlx5_devx_wq_attr *wq_attr;
 658         struct mlx5_devx_obj *rq = NULL;
 659
 660         rq = rte_calloc_socket(__func__, 1, sizeof(*rq), 0, socket);
 661         if (!rq) {
 662                 DRV_LOG(ERR, "Failed to allocate RQ data");
 663                 rte_errno = ENOMEM;
 664                 return NULL;
 665         }
 666         MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ);
 667         rq_ctx = MLX5_ADDR_OF(create_rq_in, in, ctx);
 668         MLX5_SET(rqc, rq_ctx, rlky, rq_attr->rlky);
 669         MLX5_SET(rqc, rq_ctx, delay_drop_en, rq_attr->delay_drop_en);
 670         MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
 671         MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
 672         MLX5_SET(rqc, rq_ctx, mem_rq_type, rq_attr->mem_rq_type);
 673         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
 674         MLX5_SET(rqc, rq_ctx, flush_in_error_en, rq_attr->flush_in_error_en);
 675         MLX5_SET(rqc, rq_ctx, hairpin, rq_attr->hairpin);
 676         MLX5_SET(rqc, rq_ctx, user_index, rq_attr->user_index);
 677         MLX5_SET(rqc, rq_ctx, cqn, rq_attr->cqn);
 678         MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
 679         MLX5_SET(rqc, rq_ctx, rmpn, rq_attr->rmpn);
 680         wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
 681         wq_attr = &rq_attr->wq_attr;
 682         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
 683         rq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 684                                                   out, sizeof(out));
 685         if (!rq->obj) {
 686                 DRV_LOG(ERR, "Failed to create RQ using DevX");
 687                 rte_errno = errno;
 688                 rte_free(rq);
 689                 return NULL;
 690         }
 691         rq->id = MLX5_GET(create_rq_out, out, rqn);
 692         return rq;
 693 }
 694
 695 /**
 696  * Modify RQ using DevX API.
 697  *
 698  * @param[in] rq
 699  *   Pointer to RQ object structure.
 700  * @param [in] rq_attr
 701  *   Pointer to modify RQ attributes structure.
 702  *
 703  * @return
 704  *   0 on success, a negative errno value otherwise and rte_errno is set.
 705  */
 706 int
 707 mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
 708                         struct mlx5_devx_modify_rq_attr *rq_attr)
 709 {
 710         uint32_t in[MLX5_ST_SZ_DW(modify_rq_in)] = {0};
 711         uint32_t out[MLX5_ST_SZ_DW(modify_rq_out)] = {0};
 712         void *rq_ctx, *wq_ctx;
 713         int ret;
 714
 715         MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ);
 716         MLX5_SET(modify_rq_in, in, rq_state, rq_attr->rq_state);
 717         MLX5_SET(modify_rq_in, in, rqn, rq->id);
 718         MLX5_SET64(modify_rq_in, in, modify_bitmask, rq_attr->modify_bitmask);
 719         rq_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
 720         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
 721         if (rq_attr->modify_bitmask &
 722                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_SCATTER_FCS)
 723                 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
 724         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD)
 725                 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
 726         if (rq_attr->modify_bitmask &
 727                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID)
 728                 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
 729         MLX5_SET(rqc, rq_ctx, hairpin_peer_sq, rq_attr->hairpin_peer_sq);
 730         MLX5_SET(rqc, rq_ctx, hairpin_peer_vhca, rq_attr->hairpin_peer_vhca);
 731         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_WQ_LWM) {
 732                 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
 733                 MLX5_SET(wq, wq_ctx, lwm, rq_attr->lwm);
 734         }
 735         ret = mlx5_glue->devx_obj_modify(rq->obj, in, sizeof(in),
 736                                          out, sizeof(out));
 737         if (ret) {
 738                 DRV_LOG(ERR, "Failed to modify RQ using DevX");
 739                 rte_errno = errno;
 740                 return -errno;
 741         }
 742         return ret;
 743 }
 744
 745 /**
 746  * Create TIR using DevX API.
 747  *
 748  * @param[in] ctx
 749  *   ibv_context returned from mlx5dv_open_device.
 750  * @param [in] tir_attr
 751  *   Pointer to TIR attributes structure.
 752  *
 753  * @return
 754  *   The DevX object created, NULL otherwise and rte_errno is set.
 755  */
 756 struct mlx5_devx_obj *
 757 mlx5_devx_cmd_create_tir(struct ibv_context *ctx,
 758                          struct mlx5_devx_tir_attr *tir_attr)
 759 {
 760         uint32_t in[MLX5_ST_SZ_DW(create_tir_in)] = {0};
 761         uint32_t out[MLX5_ST_SZ_DW(create_tir_out)] = {0};
 762         void *tir_ctx, *outer, *inner, *rss_key;
 763         struct mlx5_devx_obj *tir = NULL;
 764
 765         tir = rte_calloc(__func__, 1, sizeof(*tir), 0);
 766         if (!tir) {
 767                 DRV_LOG(ERR, "Failed to allocate TIR data");
 768                 rte_errno = ENOMEM;
 769                 return NULL;
 770         }
 771         MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
 772         tir_ctx = MLX5_ADDR_OF(create_tir_in, in, ctx);
 773         MLX5_SET(tirc, tir_ctx, disp_type, tir_attr->disp_type);
 774         MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
 775                  tir_attr->lro_timeout_period_usecs);
 776         MLX5_SET(tirc, tir_ctx, lro_enable_mask, tir_attr->lro_enable_mask);
 777         MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, tir_attr->lro_max_msg_sz);
 778         MLX5_SET(tirc, tir_ctx, inline_rqn, tir_attr->inline_rqn);
 779         MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, tir_attr->rx_hash_symmetric);
 780         MLX5_SET(tirc, tir_ctx, tunneled_offload_en,
 781                  tir_attr->tunneled_offload_en);
 782         MLX5_SET(tirc, tir_ctx, indirect_table, tir_attr->indirect_table);
 783         MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
 784         MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
 785         MLX5_SET(tirc, tir_ctx, transport_domain, tir_attr->transport_domain);
 786         rss_key = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_toeplitz_key);
 787         memcpy(rss_key, tir_attr->rx_hash_toeplitz_key, MLX5_RSS_HASH_KEY_LEN);
 788         outer = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_outer);
 789         MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
 790                  tir_attr->rx_hash_field_selector_outer.l3_prot_type);
 791         MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
 792                  tir_attr->rx_hash_field_selector_outer.l4_prot_type);
 793         MLX5_SET(rx_hash_field_select, outer, selected_fields,
 794                  tir_attr->rx_hash_field_selector_outer.selected_fields);
 795         inner = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_inner);
 796         MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
 797                  tir_attr->rx_hash_field_selector_inner.l3_prot_type);
 798         MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
 799                  tir_attr->rx_hash_field_selector_inner.l4_prot_type);
 800         MLX5_SET(rx_hash_field_select, inner, selected_fields,
 801                  tir_attr->rx_hash_field_selector_inner.selected_fields);
 802         tir->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 803                                                    out, sizeof(out));
 804         if (!tir->obj) {
 805                 DRV_LOG(ERR, "Failed to create TIR using DevX");
 806                 rte_errno = errno;
 807                 rte_free(tir);
 808                 return NULL;
 809         }
 810         tir->id = MLX5_GET(create_tir_out, out, tirn);
 811         return tir;
 812 }
 813
 814 /**
 815  * Create RQT using DevX API.
 816  *
 817  * @param[in] ctx
 818  *   ibv_context returned from mlx5dv_open_device.
 819  * @param [in] rqt_attr
 820  *   Pointer to RQT attributes structure.
 821  *
 822  * @return
 823  *   The DevX object created, NULL otherwise and rte_errno is set.
 824  */
 825 struct mlx5_devx_obj *
 826 mlx5_devx_cmd_create_rqt(struct ibv_context *ctx,
 827                          struct mlx5_devx_rqt_attr *rqt_attr)
 828 {
 829         uint32_t *in = NULL;
 830         uint32_t inlen = MLX5_ST_SZ_BYTES(create_rqt_in) +
 831                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
 832         uint32_t out[MLX5_ST_SZ_DW(create_rqt_out)] = {0};
 833         void *rqt_ctx;
 834         struct mlx5_devx_obj *rqt = NULL;
 835         int i;
 836
 837         in = rte_calloc(__func__, 1, inlen, 0);
 838         if (!in) {
 839                 DRV_LOG(ERR, "Failed to allocate RQT IN data");
 840                 rte_errno = ENOMEM;
 841                 return NULL;
 842         }
 843         rqt = rte_calloc(__func__, 1, sizeof(*rqt), 0);
 844         if (!rqt) {
 845                 DRV_LOG(ERR, "Failed to allocate RQT data");
 846                 rte_errno = ENOMEM;
 847                 rte_free(in);
 848                 return NULL;
 849         }
 850         MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT);
 851         rqt_ctx = MLX5_ADDR_OF(create_rqt_in, in, rqt_context);
 852         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
 853         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
 854         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
 855         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
 856                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
 857         rqt->obj = mlx5_glue->devx_obj_create(ctx, in, inlen, out, sizeof(out));
 858         rte_free(in);
 859         if (!rqt->obj) {
 860                 DRV_LOG(ERR, "Failed to create RQT using DevX");
 861                 rte_errno = errno;
 862                 rte_free(rqt);
 863                 return NULL;
 864         }
 865         rqt->id = MLX5_GET(create_rqt_out, out, rqtn);
 866         return rqt;
 867 }
 868
 869 /**
 870  * Modify RQT using DevX API.
 871  *
 872  * @param[in] rqt
 873  *   Pointer to RQT DevX object structure.
 874  * @param [in] rqt_attr
 875  *   Pointer to RQT attributes structure.
 876  *
 877  * @return
 878  *   0 on success, a negative errno value otherwise and rte_errno is set.
 879  */
 880 int
 881 mlx5_devx_cmd_modify_rqt(struct mlx5_devx_obj *rqt,
 882                          struct mlx5_devx_rqt_attr *rqt_attr)
 883 {
 884         uint32_t inlen = MLX5_ST_SZ_BYTES(modify_rqt_in) +
 885                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
 886         uint32_t out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0};
 887         uint32_t *in = rte_calloc(__func__, 1, inlen, 0);
 888         void *rqt_ctx;
 889         int i;
 890         int ret;
 891
 892         if (!in) {
 893                 DRV_LOG(ERR, "Failed to allocate RQT modify IN data.");
 894                 rte_errno = ENOMEM;
 895                 return -ENOMEM;
 896         }
 897         MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT);
 898         MLX5_SET(modify_rqt_in, in, rqtn, rqt->id);
 899         MLX5_SET64(modify_rqt_in, in, modify_bitmask, 0x1);
 900         rqt_ctx = MLX5_ADDR_OF(modify_rqt_in, in, rqt_context);
 901         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
 902         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
 903         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
 904         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
 905                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
 906         ret = mlx5_glue->devx_obj_modify(rqt->obj, in, inlen, out, sizeof(out));
 907         rte_free(in);
 908         if (ret) {
 909                 DRV_LOG(ERR, "Failed to modify RQT using DevX.");
 910                 rte_errno = errno;
 911                 return -rte_errno;
 912         }
 913         return ret;
 914 }
 915
 916 /**
 917  * Create SQ using DevX API.
 918  *
 919  * @param[in] ctx
 920  *   ibv_context returned from mlx5dv_open_device.
 921  * @param [in] sq_attr
 922  *   Pointer to SQ attributes structure.
 923  * @param [in] socket
 924  *   CPU socket ID for allocations.
 925  *
 926  * @return
 927  *   The DevX object created, NULL otherwise and rte_errno is set.
 928  **/
 929 struct mlx5_devx_obj *
 930 mlx5_devx_cmd_create_sq(struct ibv_context *ctx,
 931                         struct mlx5_devx_create_sq_attr *sq_attr)
 932 {
 933         uint32_t in[MLX5_ST_SZ_DW(create_sq_in)] = {0};
 934         uint32_t out[MLX5_ST_SZ_DW(create_sq_out)] = {0};
 935         void *sq_ctx;
 936         void *wq_ctx;
 937         struct mlx5_devx_wq_attr *wq_attr;
 938         struct mlx5_devx_obj *sq = NULL;
 939
 940         sq = rte_calloc(__func__, 1, sizeof(*sq), 0);
 941         if (!sq) {
 942                 DRV_LOG(ERR, "Failed to allocate SQ data");
 943                 rte_errno = ENOMEM;
 944                 return NULL;
 945         }
 946         MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
 947         sq_ctx = MLX5_ADDR_OF(create_sq_in, in, ctx);
 948         MLX5_SET(sqc, sq_ctx, rlky, sq_attr->rlky);
 949         MLX5_SET(sqc, sq_ctx, cd_master, sq_attr->cd_master);
 950         MLX5_SET(sqc, sq_ctx, fre, sq_attr->fre);
 951         MLX5_SET(sqc, sq_ctx, flush_in_error_en, sq_attr->flush_in_error_en);
 952         MLX5_SET(sqc, sq_ctx, allow_multi_pkt_send_wqe,
 953                  sq_attr->flush_in_error_en);
 954         MLX5_SET(sqc, sq_ctx, min_wqe_inline_mode,
 955                  sq_attr->min_wqe_inline_mode);
 956         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
 957         MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr);
 958         MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp);
 959         MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin);
 960         MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index);
 961         MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn);
 962         MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index,
 963                  sq_attr->packet_pacing_rate_limit_index);
 964         MLX5_SET(sqc, sq_ctx, tis_lst_sz, sq_attr->tis_lst_sz);
 965         MLX5_SET(sqc, sq_ctx, tis_num_0, sq_attr->tis_num);
 966         wq_ctx = MLX5_ADDR_OF(sqc, sq_ctx, wq);
 967         wq_attr = &sq_attr->wq_attr;
 968         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
 969         sq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 970                                              out, sizeof(out));
 971         if (!sq->obj) {
 972                 DRV_LOG(ERR, "Failed to create SQ using DevX");
 973                 rte_errno = errno;
 974                 rte_free(sq);
 975                 return NULL;
 976         }
 977         sq->id = MLX5_GET(create_sq_out, out, sqn);
 978         return sq;
 979 }
 980
 981 /**
 982  * Modify SQ using DevX API.
 983  *
 984  * @param[in] sq
 985  *   Pointer to SQ object structure.
 986  * @param [in] sq_attr
 987  *   Pointer to SQ attributes structure.
 988  *
 989  * @return
 990  *   0 on success, a negative errno value otherwise and rte_errno is set.
 991  */
 992 int
 993 mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq,
 994                         struct mlx5_devx_modify_sq_attr *sq_attr)
 995 {
 996         uint32_t in[MLX5_ST_SZ_DW(modify_sq_in)] = {0};
 997         uint32_t out[MLX5_ST_SZ_DW(modify_sq_out)] = {0};
 998         void *sq_ctx;
 999         int ret;
1000
1001         MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ);
1002         MLX5_SET(modify_sq_in, in, sq_state, sq_attr->sq_state);
1003         MLX5_SET(modify_sq_in, in, sqn, sq->id);
1004         sq_ctx = MLX5_ADDR_OF(modify_sq_in, in, ctx);
1005         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1006         MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq);
1007         MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca);
1008         ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in),
1009                                          out, sizeof(out));
1010         if (ret) {
1011                 DRV_LOG(ERR, "Failed to modify SQ using DevX");
1012                 rte_errno = errno;
1013                 return -errno;
1014         }
1015         return ret;
1016 }
1017
1018 /**
1019  * Create TIS using DevX API.
1020  *
1021  * @param[in] ctx
1022  *   ibv_context returned from mlx5dv_open_device.
1023  * @param [in] tis_attr
1024  *   Pointer to TIS attributes structure.
1025  *
1026  * @return
1027  *   The DevX object created, NULL otherwise and rte_errno is set.
1028  */
1029 struct mlx5_devx_obj *
1030 mlx5_devx_cmd_create_tis(struct ibv_context *ctx,
1031                          struct mlx5_devx_tis_attr *tis_attr)
1032 {
1033         uint32_t in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
1034         uint32_t out[MLX5_ST_SZ_DW(create_tis_out)] = {0};
1035         struct mlx5_devx_obj *tis = NULL;
1036         void *tis_ctx;
1037
1038         tis = rte_calloc(__func__, 1, sizeof(*tis), 0);
1039         if (!tis) {
1040                 DRV_LOG(ERR, "Failed to allocate TIS object");
1041                 rte_errno = ENOMEM;
1042                 return NULL;
1043         }
1044         MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS);
1045         tis_ctx = MLX5_ADDR_OF(create_tis_in, in, ctx);
1046         MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1047                  tis_attr->strict_lag_tx_port_affinity);
1048         MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1049                  tis_attr->strict_lag_tx_port_affinity);
1050         MLX5_SET(tisc, tis_ctx, prio, tis_attr->prio);
1051         MLX5_SET(tisc, tis_ctx, transport_domain,
1052                  tis_attr->transport_domain);
1053         tis->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1054                                               out, sizeof(out));
1055         if (!tis->obj) {
1056                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1057                 rte_errno = errno;
1058                 rte_free(tis);
1059                 return NULL;
1060         }
1061         tis->id = MLX5_GET(create_tis_out, out, tisn);
1062         return tis;
1063 }
1064
1065 /**
1066  * Create transport domain using DevX API.
1067  *
1068  * @param[in] ctx
1069  *   ibv_context returned from mlx5dv_open_device.
1070  *
1071  * @return
1072  *   The DevX object created, NULL otherwise and rte_errno is set.
1073  */
1074 struct mlx5_devx_obj *
1075 mlx5_devx_cmd_create_td(struct ibv_context *ctx)
1076 {
1077         uint32_t in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {0};
1078         uint32_t out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0};
1079         struct mlx5_devx_obj *td = NULL;
1080
1081         td = rte_calloc(__func__, 1, sizeof(*td), 0);
1082         if (!td) {
1083                 DRV_LOG(ERR, "Failed to allocate TD object");
1084                 rte_errno = ENOMEM;
1085                 return NULL;
1086         }
1087         MLX5_SET(alloc_transport_domain_in, in, opcode,
1088                  MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN);
1089         td->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1090                                              out, sizeof(out));
1091         if (!td->obj) {
1092                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1093                 rte_errno = errno;
1094                 rte_free(td);
1095                 return NULL;
1096         }
1097         td->id = MLX5_GET(alloc_transport_domain_out, out,
1098                            transport_domain);
1099         return td;
1100 }
1101
1102 /**
1103  * Dump all flows to file.
1104  *
1105  * @param[in] fdb_domain
1106  *   FDB domain.
1107  * @param[in] rx_domain
1108  *   RX domain.
1109  * @param[in] tx_domain
1110  *   TX domain.
1111  * @param[out] file
1112  *   Pointer to file stream.
1113  *
1114  * @return
1115  *   0 on success, a nagative value otherwise.
1116  */
1117 int
1118 mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused,
1119                         void *rx_domain __rte_unused,
1120                         void *tx_domain __rte_unused, FILE *file __rte_unused)
1121 {
1122         int ret = 0;
1123
1124 #ifdef HAVE_MLX5_DR_FLOW_DUMP
1125         if (fdb_domain) {
1126                 ret = mlx5_glue->dr_dump_domain(file, fdb_domain);
1127                 if (ret)
1128                         return ret;
1129         }
1130         MLX5_ASSERT(rx_domain);
1131         ret = mlx5_glue->dr_dump_domain(file, rx_domain);
1132         if (ret)
1133                 return ret;
1134         MLX5_ASSERT(tx_domain);
1135         ret = mlx5_glue->dr_dump_domain(file, tx_domain);
1136 #else
1137         ret = ENOTSUP;
1138 #endif
1139         return -ret;
1140 }
1141
1142 /*
1143  * Create CQ using DevX API.
1144  *
1145  * @param[in] ctx
1146  *   ibv_context returned from mlx5dv_open_device.
1147  * @param [in] attr
1148  *   Pointer to CQ attributes structure.
1149  *
1150  * @return
1151  *   The DevX object created, NULL otherwise and rte_errno is set.
1152  */
1153 struct mlx5_devx_obj *
1154 mlx5_devx_cmd_create_cq(struct ibv_context *ctx, struct mlx5_devx_cq_attr *attr)
1155 {
1156         uint32_t in[MLX5_ST_SZ_DW(create_cq_in)] = {0};
1157         uint32_t out[MLX5_ST_SZ_DW(create_cq_out)] = {0};
1158         struct mlx5_devx_obj *cq_obj = rte_zmalloc(__func__, sizeof(*cq_obj),
1159                                                    0);
1160         void *cqctx = MLX5_ADDR_OF(create_cq_in, in, cq_context);
1161
1162         if (!cq_obj) {
1163                 DRV_LOG(ERR, "Failed to allocate CQ object memory.");
1164                 rte_errno = ENOMEM;
1165                 return NULL;
1166         }
1167         MLX5_SET(create_cq_in, in, opcode, MLX5_CMD_OP_CREATE_CQ);
1168         if (attr->db_umem_valid) {
1169                 MLX5_SET(cqc, cqctx, dbr_umem_valid, attr->db_umem_valid);
1170                 MLX5_SET(cqc, cqctx, dbr_umem_id, attr->db_umem_id);
1171                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_umem_offset);
1172         } else {
1173                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr);
1174         }
1175         MLX5_SET(cqc, cqctx, cc, attr->use_first_only);
1176         MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore);
1177         MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size);
1178         MLX5_SET(cqc, cqctx, log_page_size, attr->log_page_size -
1179                  MLX5_ADAPTER_PAGE_SHIFT);
1180         MLX5_SET(cqc, cqctx, c_eqn, attr->eqn);
1181         MLX5_SET(cqc, cqctx, uar_page, attr->uar_page_id);
1182         if (attr->q_umem_valid) {
1183                 MLX5_SET(create_cq_in, in, cq_umem_valid, attr->q_umem_valid);
1184                 MLX5_SET(create_cq_in, in, cq_umem_id, attr->q_umem_id);
1185                 MLX5_SET64(create_cq_in, in, cq_umem_offset,
1186                            attr->q_umem_offset);
1187         }
1188         cq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1189                                                  sizeof(out));
1190         if (!cq_obj->obj) {
1191                 rte_errno = errno;
1192                 DRV_LOG(ERR, "Failed to create CQ using DevX errno=%d.", errno);
1193                 rte_free(cq_obj);
1194                 return NULL;
1195         }
1196         cq_obj->id = MLX5_GET(create_cq_out, out, cqn);
1197         return cq_obj;
1198 }
1199
1200 /**
1201  * Create VIRTQ using DevX API.
1202  *
1203  * @param[in] ctx
1204  *   ibv_context returned from mlx5dv_open_device.
1205  * @param [in] attr
1206  *   Pointer to VIRTQ attributes structure.
1207  *
1208  * @return
1209  *   The DevX object created, NULL otherwise and rte_errno is set.
1210  */
1211 struct mlx5_devx_obj *
1212 mlx5_devx_cmd_create_virtq(struct ibv_context *ctx,
1213                            struct mlx5_devx_virtq_attr *attr)
1214 {
1215         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1216         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1217         struct mlx5_devx_obj *virtq_obj = rte_zmalloc(__func__,
1218                                                      sizeof(*virtq_obj), 0);
1219         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1220         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1221         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1222
1223         if (!virtq_obj) {
1224                 DRV_LOG(ERR, "Failed to allocate virtq data.");
1225                 rte_errno = ENOMEM;
1226                 return NULL;
1227         }
1228         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1229                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1230         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1231                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1232         MLX5_SET16(virtio_net_q, virtq, hw_available_index,
1233                    attr->hw_available_index);
1234         MLX5_SET16(virtio_net_q, virtq, hw_used_index, attr->hw_used_index);
1235         MLX5_SET16(virtio_net_q, virtq, tso_ipv4, attr->tso_ipv4);
1236         MLX5_SET16(virtio_net_q, virtq, tso_ipv6, attr->tso_ipv6);
1237         MLX5_SET16(virtio_net_q, virtq, tx_csum, attr->tx_csum);
1238         MLX5_SET16(virtio_net_q, virtq, rx_csum, attr->rx_csum);
1239         MLX5_SET16(virtio_q, virtctx, virtio_version_1_0,
1240                    attr->virtio_version_1_0);
1241         MLX5_SET16(virtio_q, virtctx, event_mode, attr->event_mode);
1242         MLX5_SET(virtio_q, virtctx, event_qpn_or_msix, attr->qp_id);
1243         MLX5_SET64(virtio_q, virtctx, desc_addr, attr->desc_addr);
1244         MLX5_SET64(virtio_q, virtctx, used_addr, attr->used_addr);
1245         MLX5_SET64(virtio_q, virtctx, available_addr, attr->available_addr);
1246         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1247         MLX5_SET16(virtio_q, virtctx, queue_size, attr->q_size);
1248         MLX5_SET(virtio_q, virtctx, virtio_q_mkey, attr->mkey);
1249         MLX5_SET(virtio_q, virtctx, umem_1_id, attr->umems[0].id);
1250         MLX5_SET(virtio_q, virtctx, umem_1_size, attr->umems[0].size);
1251         MLX5_SET64(virtio_q, virtctx, umem_1_offset, attr->umems[0].offset);
1252         MLX5_SET(virtio_q, virtctx, umem_2_id, attr->umems[1].id);
1253         MLX5_SET(virtio_q, virtctx, umem_2_size, attr->umems[1].size);
1254         MLX5_SET64(virtio_q, virtctx, umem_2_offset, attr->umems[1].offset);
1255         MLX5_SET(virtio_q, virtctx, umem_3_id, attr->umems[2].id);
1256         MLX5_SET(virtio_q, virtctx, umem_3_size, attr->umems[2].size);
1257         MLX5_SET64(virtio_q, virtctx, umem_3_offset, attr->umems[2].offset);
1258         MLX5_SET(virtio_net_q, virtq, tisn_or_qpn, attr->tis_id);
1259         virtq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1260                                                     sizeof(out));
1261         if (!virtq_obj->obj) {
1262                 rte_errno = errno;
1263                 DRV_LOG(ERR, "Failed to create VIRTQ Obj using DevX.");
1264                 rte_free(virtq_obj);
1265                 return NULL;
1266         }
1267         virtq_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1268         return virtq_obj;
1269 }
1270
1271 /**
1272  * Modify VIRTQ using DevX API.
1273  *
1274  * @param[in] virtq_obj
1275  *   Pointer to virtq object structure.
1276  * @param [in] attr
1277  *   Pointer to modify virtq attributes structure.
1278  *
1279  * @return
1280  *   0 on success, a negative errno value otherwise and rte_errno is set.
1281  */
1282 int
1283 mlx5_devx_cmd_modify_virtq(struct mlx5_devx_obj *virtq_obj,
1284                            struct mlx5_devx_virtq_attr *attr)
1285 {
1286         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1287         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1288         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1289         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1290         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1291         int ret;
1292
1293         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1294                  MLX5_CMD_OP_MODIFY_GENERAL_OBJECT);
1295         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1296                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1297         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1298         MLX5_SET64(virtio_net_q, virtq, modify_field_select, attr->type);
1299         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1300         switch (attr->type) {
1301         case MLX5_VIRTQ_MODIFY_TYPE_STATE:
1302                 MLX5_SET16(virtio_net_q, virtq, state, attr->state);
1303                 break;
1304         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS:
1305                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_mkey,
1306                          attr->dirty_bitmap_mkey);
1307                 MLX5_SET64(virtio_net_q, virtq, dirty_bitmap_addr,
1308                          attr->dirty_bitmap_addr);
1309                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_size,
1310                          attr->dirty_bitmap_size);
1311                 break;
1312         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE:
1313                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_dump_enable,
1314                          attr->dirty_bitmap_dump_enable);
1315                 break;
1316         default:
1317                 rte_errno = EINVAL;
1318                 return -rte_errno;
1319         }
1320         ret = mlx5_glue->devx_obj_modify(virtq_obj->obj, in, sizeof(in),
1321                                          out, sizeof(out));
1322         if (ret) {
1323                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1324                 rte_errno = errno;
1325                 return -errno;
1326         }
1327         return ret;
1328 }
1329
1330 /**
1331  * Query VIRTQ using DevX API.
1332  *
1333  * @param[in] virtq_obj
1334  *   Pointer to virtq object structure.
1335  * @param [in/out] attr
1336  *   Pointer to virtq attributes structure.
1337  *
1338  * @return
1339  *   0 on success, a negative errno value otherwise and rte_errno is set.
1340  */
1341 int
1342 mlx5_devx_cmd_query_virtq(struct mlx5_devx_obj *virtq_obj,
1343                            struct mlx5_devx_virtq_attr *attr)
1344 {
1345         uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1346         uint32_t out[MLX5_ST_SZ_DW(query_virtq_out)] = {0};
1347         void *hdr = MLX5_ADDR_OF(query_virtq_out, in, hdr);
1348         void *virtq = MLX5_ADDR_OF(query_virtq_out, out, virtq);
1349         int ret;
1350
1351         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1352                  MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1353         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1354                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1355         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1356         ret = mlx5_glue->devx_obj_query(virtq_obj->obj, in, sizeof(in),
1357                                          out, sizeof(out));
1358         if (ret) {
1359                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1360                 rte_errno = errno;
1361                 return -errno;
1362         }
1363         attr->hw_available_index = MLX5_GET16(virtio_net_q, virtq,
1364                                               hw_available_index);
1365         attr->hw_used_index = MLX5_GET16(virtio_net_q, virtq, hw_used_index);
1366         return ret;
1367 }
1368
1369 /**
1370  * Create QP using DevX API.
1371  *
1372  * @param[in] ctx
1373  *   ibv_context returned from mlx5dv_open_device.
1374  * @param [in] attr
1375  *   Pointer to QP attributes structure.
1376  *
1377  * @return
1378  *   The DevX object created, NULL otherwise and rte_errno is set.
1379  */
1380 struct mlx5_devx_obj *
1381 mlx5_devx_cmd_create_qp(struct ibv_context *ctx,
1382                         struct mlx5_devx_qp_attr *attr)
1383 {
1384         uint32_t in[MLX5_ST_SZ_DW(create_qp_in)] = {0};
1385         uint32_t out[MLX5_ST_SZ_DW(create_qp_out)] = {0};
1386         struct mlx5_devx_obj *qp_obj = rte_zmalloc(__func__, sizeof(*qp_obj),
1387                                                    0);
1388         void *qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
1389
1390         if (!qp_obj) {
1391                 DRV_LOG(ERR, "Failed to allocate QP data.");
1392                 rte_errno = ENOMEM;
1393                 return NULL;
1394         }
1395         MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
1396         MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
1397         MLX5_SET(qpc, qpc, pd, attr->pd);
1398         if (attr->uar_index) {
1399                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1400                 MLX5_SET(qpc, qpc, uar_page, attr->uar_index);
1401                 MLX5_SET(qpc, qpc, log_page_size, attr->log_page_size -
1402                          MLX5_ADAPTER_PAGE_SHIFT);
1403                 if (attr->sq_size) {
1404                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->sq_size));
1405                         MLX5_SET(qpc, qpc, cqn_snd, attr->cqn);
1406                         MLX5_SET(qpc, qpc, log_sq_size,
1407                                  rte_log2_u32(attr->sq_size));
1408                 } else {
1409                         MLX5_SET(qpc, qpc, no_sq, 1);
1410                 }
1411                 if (attr->rq_size) {
1412                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->rq_size));
1413                         MLX5_SET(qpc, qpc, cqn_rcv, attr->cqn);
1414                         MLX5_SET(qpc, qpc, log_rq_stride, attr->log_rq_stride -
1415                                  MLX5_LOG_RQ_STRIDE_SHIFT);
1416                         MLX5_SET(qpc, qpc, log_rq_size,
1417                                  rte_log2_u32(attr->rq_size));
1418                         MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ);
1419                 } else {
1420                         MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1421                 }
1422                 if (attr->dbr_umem_valid) {
1423                         MLX5_SET(qpc, qpc, dbr_umem_valid,
1424                                  attr->dbr_umem_valid);
1425                         MLX5_SET(qpc, qpc, dbr_umem_id, attr->dbr_umem_id);
1426                 }
1427                 MLX5_SET64(qpc, qpc, dbr_addr, attr->dbr_address);
1428                 MLX5_SET64(create_qp_in, in, wq_umem_offset,
1429                            attr->wq_umem_offset);
1430                 MLX5_SET(create_qp_in, in, wq_umem_id, attr->wq_umem_id);
1431                 MLX5_SET(create_qp_in, in, wq_umem_valid, 1);
1432         } else {
1433                 /* Special QP to be managed by FW - no SQ\RQ\CQ\UAR\DB rec. */
1434                 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1435                 MLX5_SET(qpc, qpc, no_sq, 1);
1436         }
1437         qp_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1438                                                  sizeof(out));
1439         if (!qp_obj->obj) {
1440                 rte_errno = errno;
1441                 DRV_LOG(ERR, "Failed to create QP Obj using DevX.");
1442                 rte_free(qp_obj);
1443                 return NULL;
1444         }
1445         qp_obj->id = MLX5_GET(create_qp_out, out, qpn);
1446         return qp_obj;
1447 }
1448
1449 /**
1450  * Modify QP using DevX API.
1451  * Currently supports only force loop-back QP.
1452  *
1453  * @param[in] qp
1454  *   Pointer to QP object structure.
1455  * @param [in] qp_st_mod_op
1456  *   The QP state modification operation.
1457  * @param [in] remote_qp_id
1458  *   The remote QP ID for MLX5_CMD_OP_INIT2RTR_QP operation.
1459  *
1460  * @return
1461  *   0 on success, a negative errno value otherwise and rte_errno is set.
1462  */
1463 int
1464 mlx5_devx_cmd_modify_qp_state(struct mlx5_devx_obj *qp, uint32_t qp_st_mod_op,
1465                               uint32_t remote_qp_id)
1466 {
1467         union {
1468                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_in)];
1469                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_in)];
1470                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_in)];
1471         } in;
1472         union {
1473                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_out)];
1474                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_out)];
1475                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_out)];
1476         } out;
1477         void *qpc;
1478         int ret;
1479         unsigned int inlen;
1480         unsigned int outlen;
1481
1482         memset(&in, 0, sizeof(in));
1483         memset(&out, 0, sizeof(out));
1484         MLX5_SET(rst2init_qp_in, &in, opcode, qp_st_mod_op);
1485         switch (qp_st_mod_op) {
1486         case MLX5_CMD_OP_RST2INIT_QP:
1487                 MLX5_SET(rst2init_qp_in, &in, qpn, qp->id);
1488                 qpc = MLX5_ADDR_OF(rst2init_qp_in, &in, qpc);
1489                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1490                 MLX5_SET(qpc, qpc, rre, 1);
1491                 MLX5_SET(qpc, qpc, rwe, 1);
1492                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1493                 inlen = sizeof(in.rst2init);
1494                 outlen = sizeof(out.rst2init);
1495                 break;
1496         case MLX5_CMD_OP_INIT2RTR_QP:
1497                 MLX5_SET(init2rtr_qp_in, &in, qpn, qp->id);
1498                 qpc = MLX5_ADDR_OF(init2rtr_qp_in, &in, qpc);
1499                 MLX5_SET(qpc, qpc, primary_address_path.fl, 1);
1500                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1501                 MLX5_SET(qpc, qpc, mtu, 1);
1502                 MLX5_SET(qpc, qpc, log_msg_max, 30);
1503                 MLX5_SET(qpc, qpc, remote_qpn, remote_qp_id);
1504                 MLX5_SET(qpc, qpc, min_rnr_nak, 0);
1505                 inlen = sizeof(in.init2rtr);
1506                 outlen = sizeof(out.init2rtr);
1507                 break;
1508         case MLX5_CMD_OP_RTR2RTS_QP:
1509                 qpc = MLX5_ADDR_OF(rtr2rts_qp_in, &in, qpc);
1510                 MLX5_SET(rtr2rts_qp_in, &in, qpn, qp->id);
1511                 MLX5_SET(qpc, qpc, primary_address_path.ack_timeout, 14);
1512                 MLX5_SET(qpc, qpc, log_ack_req_freq, 0);
1513                 MLX5_SET(qpc, qpc, retry_count, 7);
1514                 MLX5_SET(qpc, qpc, rnr_retry, 7);
1515                 inlen = sizeof(in.rtr2rts);
1516                 outlen = sizeof(out.rtr2rts);
1517                 break;
1518         default:
1519                 DRV_LOG(ERR, "Invalid or unsupported QP modify op %u.",
1520                         qp_st_mod_op);
1521                 rte_errno = EINVAL;
1522                 return -rte_errno;
1523         }
1524         ret = mlx5_glue->devx_obj_modify(qp->obj, &in, inlen, &out, outlen);
1525         if (ret) {
1526                 DRV_LOG(ERR, "Failed to modify QP using DevX.");
1527                 rte_errno = errno;
1528                 return -errno;
1529         }
1530         return ret;
1531 }