drivers/common/mlx5/mlx5_devx_cmds.c

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /* Copyright 2018 Mellanox Technologies, Ltd */
   3
   4 #include <unistd.h>
   5
   6 #include <rte_errno.h>
   7 #include <rte_malloc.h>
   8
   9 #include "mlx5_prm.h"
  10 #include "mlx5_devx_cmds.h"
  11 #include "mlx5_common_utils.h"
  12
  13
  14 /**
  15  * Allocate flow counters via devx interface.
  16  *
  17  * @param[in] ctx
  18  *   Context returned from mlx5 open_device() glue function.
  19  * @param dcs
  20  *   Pointer to counters properties structure to be filled by the routine.
  21  * @param bulk_n_128
  22  *   Bulk counter numbers in 128 counters units.
  23  *
  24  * @return
  25  *   Pointer to counter object on success, a negative value otherwise and
  26  *   rte_errno is set.
  27  */
  28 struct mlx5_devx_obj *
  29 mlx5_devx_cmd_flow_counter_alloc(void *ctx, uint32_t bulk_n_128)
  30 {
  31         struct mlx5_devx_obj *dcs = rte_zmalloc("dcs", sizeof(*dcs), 0);
  32         uint32_t in[MLX5_ST_SZ_DW(alloc_flow_counter_in)]   = {0};
  33         uint32_t out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0};
  34
  35         if (!dcs) {
  36                 rte_errno = ENOMEM;
  37                 return NULL;
  38         }
  39         MLX5_SET(alloc_flow_counter_in, in, opcode,
  40                  MLX5_CMD_OP_ALLOC_FLOW_COUNTER);
  41         MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, bulk_n_128);
  42         dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
  43                                               sizeof(in), out, sizeof(out));
  44         if (!dcs->obj) {
  45                 DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
  46                 rte_errno = errno;
  47                 rte_free(dcs);
  48                 return NULL;
  49         }
  50         dcs->id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id);
  51         return dcs;
  52 }
  53
  54 /**
  55  * Query flow counters values.
  56  *
  57  * @param[in] dcs
  58  *   devx object that was obtained from mlx5_devx_cmd_fc_alloc.
  59  * @param[in] clear
  60  *   Whether hardware should clear the counters after the query or not.
  61  * @param[in] n_counters
  62  *   0 in case of 1 counter to read, otherwise the counter number to read.
  63  *  @param pkts
  64  *   The number of packets that matched the flow.
  65  *  @param bytes
  66  *    The number of bytes that matched the flow.
  67  *  @param mkey
  68  *   The mkey key for batch query.
  69  *  @param addr
  70  *    The address in the mkey range for batch query.
  71  *  @param cmd_comp
  72  *   The completion object for asynchronous batch query.
  73  *  @param async_id
  74  *    The ID to be returned in the asynchronous batch query response.
  75  *
  76  * @return
  77  *   0 on success, a negative value otherwise.
  78  */
  79 int
  80 mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
  81                                  int clear, uint32_t n_counters,
  82                                  uint64_t *pkts, uint64_t *bytes,
  83                                  uint32_t mkey, void *addr,
  84                                  void *cmd_comp,
  85                                  uint64_t async_id)
  86 {
  87         int out_len = MLX5_ST_SZ_BYTES(query_flow_counter_out) +
  88                         MLX5_ST_SZ_BYTES(traffic_counter);
  89         uint32_t out[out_len];
  90         uint32_t in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
  91         void *stats;
  92         int rc;
  93
  94         MLX5_SET(query_flow_counter_in, in, opcode,
  95                  MLX5_CMD_OP_QUERY_FLOW_COUNTER);
  96         MLX5_SET(query_flow_counter_in, in, op_mod, 0);
  97         MLX5_SET(query_flow_counter_in, in, flow_counter_id, dcs->id);
  98         MLX5_SET(query_flow_counter_in, in, clear, !!clear);
  99
 100         if (n_counters) {
 101                 MLX5_SET(query_flow_counter_in, in, num_of_counters,
 102                          n_counters);
 103                 MLX5_SET(query_flow_counter_in, in, dump_to_memory, 1);
 104                 MLX5_SET(query_flow_counter_in, in, mkey, mkey);
 105                 MLX5_SET64(query_flow_counter_in, in, address,
 106                            (uint64_t)(uintptr_t)addr);
 107         }
 108         if (!cmd_comp)
 109                 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out,
 110                                                out_len);
 111         else
 112                 rc = mlx5_glue->devx_obj_query_async(dcs->obj, in, sizeof(in),
 113                                                      out_len, async_id,
 114                                                      cmd_comp);
 115         if (rc) {
 116                 DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc);
 117                 rte_errno = rc;
 118                 return -rc;
 119         }
 120         if (!n_counters) {
 121                 stats = MLX5_ADDR_OF(query_flow_counter_out,
 122                                      out, flow_statistics);
 123                 *pkts = MLX5_GET64(traffic_counter, stats, packets);
 124                 *bytes = MLX5_GET64(traffic_counter, stats, octets);
 125         }
 126         return 0;
 127 }
 128
 129 /**
 130  * Create a new mkey.
 131  *
 132  * @param[in] ctx
 133  *   Context returned from mlx5 open_device() glue function.
 134  * @param[in] attr
 135  *   Attributes of the requested mkey.
 136  *
 137  * @return
 138  *   Pointer to Devx mkey on success, a negative value otherwise and rte_errno
 139  *   is set.
 140  */
 141 struct mlx5_devx_obj *
 142 mlx5_devx_cmd_mkey_create(void *ctx,
 143                           struct mlx5_devx_mkey_attr *attr)
 144 {
 145         struct mlx5_klm *klm_array = attr->klm_array;
 146         int klm_num = attr->klm_num;
 147         int in_size_dw = MLX5_ST_SZ_DW(create_mkey_in) +
 148                      (klm_num ? RTE_ALIGN(klm_num, 4) : 0) * MLX5_ST_SZ_DW(klm);
 149         uint32_t in[in_size_dw];
 150         uint32_t out[MLX5_ST_SZ_DW(create_mkey_out)] = {0};
 151         void *mkc;
 152         struct mlx5_devx_obj *mkey = rte_zmalloc("mkey", sizeof(*mkey), 0);
 153         size_t pgsize;
 154         uint32_t translation_size;
 155
 156         if (!mkey) {
 157                 rte_errno = ENOMEM;
 158                 return NULL;
 159         }
 160         memset(in, 0, in_size_dw * 4);
 161         pgsize = sysconf(_SC_PAGESIZE);
 162         MLX5_SET(create_mkey_in, in, opcode, MLX5_CMD_OP_CREATE_MKEY);
 163         mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
 164         if (klm_num > 0) {
 165                 int i;
 166                 uint8_t *klm = (uint8_t *)MLX5_ADDR_OF(create_mkey_in, in,
 167                                                        klm_pas_mtt);
 168                 translation_size = RTE_ALIGN(klm_num, 4);
 169                 for (i = 0; i < klm_num; i++) {
 170                         MLX5_SET(klm, klm, byte_count, klm_array[i].byte_count);
 171                         MLX5_SET(klm, klm, mkey, klm_array[i].mkey);
 172                         MLX5_SET64(klm, klm, address, klm_array[i].address);
 173                         klm += MLX5_ST_SZ_BYTES(klm);
 174                 }
 175                 for (; i < (int)translation_size; i++) {
 176                         MLX5_SET(klm, klm, mkey, 0x0);
 177                         MLX5_SET64(klm, klm, address, 0x0);
 178                         klm += MLX5_ST_SZ_BYTES(klm);
 179                 }
 180                 MLX5_SET(mkc, mkc, access_mode_1_0, attr->log_entity_size ?
 181                          MLX5_MKC_ACCESS_MODE_KLM_FBS :
 182                          MLX5_MKC_ACCESS_MODE_KLM);
 183                 MLX5_SET(mkc, mkc, log_page_size, attr->log_entity_size);
 184         } else {
 185                 translation_size = (RTE_ALIGN(attr->size, pgsize) * 8) / 16;
 186                 MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
 187                 MLX5_SET(mkc, mkc, log_page_size, rte_log2_u32(pgsize));
 188         }
 189         MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
 190                  translation_size);
 191         MLX5_SET(create_mkey_in, in, mkey_umem_id, attr->umem_id);
 192         MLX5_SET(create_mkey_in, in, pg_access, attr->pg_access);
 193         MLX5_SET(mkc, mkc, lw, 0x1);
 194         MLX5_SET(mkc, mkc, lr, 0x1);
 195         MLX5_SET(mkc, mkc, qpn, 0xffffff);
 196         MLX5_SET(mkc, mkc, pd, attr->pd);
 197         MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
 198         MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
 199         if (attr->relaxed_ordering == 1) {
 200                 MLX5_SET(mkc, mkc, relaxed_ordering_write, 0x1);
 201                 MLX5_SET(mkc, mkc, relaxed_ordering_read, 0x1);
 202         }
 203         MLX5_SET64(mkc, mkc, start_addr, attr->addr);
 204         MLX5_SET64(mkc, mkc, len, attr->size);
 205         mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out,
 206                                                sizeof(out));
 207         if (!mkey->obj) {
 208                 DRV_LOG(ERR, "Can't create %sdirect mkey - error %d\n",
 209                         klm_num ? "an in" : "a ", errno);
 210                 rte_errno = errno;
 211                 rte_free(mkey);
 212                 return NULL;
 213         }
 214         mkey->id = MLX5_GET(create_mkey_out, out, mkey_index);
 215         mkey->id = (mkey->id << 8) | (attr->umem_id & 0xFF);
 216         return mkey;
 217 }
 218
 219 /**
 220  * Get status of devx command response.
 221  * Mainly used for asynchronous commands.
 222  *
 223  * @param[in] out
 224  *   The out response buffer.
 225  *
 226  * @return
 227  *   0 on success, non-zero value otherwise.
 228  */
 229 int
 230 mlx5_devx_get_out_command_status(void *out)
 231 {
 232         int status;
 233
 234         if (!out)
 235                 return -EINVAL;
 236         status = MLX5_GET(query_flow_counter_out, out, status);
 237         if (status) {
 238                 int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome);
 239
 240                 DRV_LOG(ERR, "Bad devX status %x, syndrome = %x", status,
 241                         syndrome);
 242         }
 243         return status;
 244 }
 245
 246 /**
 247  * Destroy any object allocated by a Devx API.
 248  *
 249  * @param[in] obj
 250  *   Pointer to a general object.
 251  *
 252  * @return
 253  *   0 on success, a negative value otherwise.
 254  */
 255 int
 256 mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj)
 257 {
 258         int ret;
 259
 260         if (!obj)
 261                 return 0;
 262         ret =  mlx5_glue->devx_obj_destroy(obj->obj);
 263         rte_free(obj);
 264         return ret;
 265 }
 266
 267 /**
 268  * Query NIC vport context.
 269  * Fills minimal inline attribute.
 270  *
 271  * @param[in] ctx
 272  *   ibv contexts returned from mlx5dv_open_device.
 273  * @param[in] vport
 274  *   vport index
 275  * @param[out] attr
 276  *   Attributes device values.
 277  *
 278  * @return
 279  *   0 on success, a negative value otherwise.
 280  */
 281 static int
 282 mlx5_devx_cmd_query_nic_vport_context(void *ctx,
 283                                       unsigned int vport,
 284                                       struct mlx5_hca_attr *attr)
 285 {
 286         uint32_t in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
 287         uint32_t out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0};
 288         void *vctx;
 289         int status, syndrome, rc;
 290
 291         /* Query NIC vport context to determine inline mode. */
 292         MLX5_SET(query_nic_vport_context_in, in, opcode,
 293                  MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
 294         MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
 295         if (vport)
 296                 MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
 297         rc = mlx5_glue->devx_general_cmd(ctx,
 298                                          in, sizeof(in),
 299                                          out, sizeof(out));
 300         if (rc)
 301                 goto error;
 302         status = MLX5_GET(query_nic_vport_context_out, out, status);
 303         syndrome = MLX5_GET(query_nic_vport_context_out, out, syndrome);
 304         if (status) {
 305                 DRV_LOG(DEBUG, "Failed to query NIC vport context, "
 306                         "status %x, syndrome = %x",
 307                         status, syndrome);
 308                 return -1;
 309         }
 310         vctx = MLX5_ADDR_OF(query_nic_vport_context_out, out,
 311                             nic_vport_context);
 312         attr->vport_inline_mode = MLX5_GET(nic_vport_context, vctx,
 313                                            min_wqe_inline_mode);
 314         return 0;
 315 error:
 316         rc = (rc > 0) ? -rc : rc;
 317         return rc;
 318 }
 319
 320 /**
 321  * Query NIC vDPA attributes.
 322  *
 323  * @param[in] ctx
 324  *   Context returned from mlx5 open_device() glue function.
 325  * @param[out] vdpa_attr
 326  *   vDPA Attributes structure to fill.
 327  */
 328 static void
 329 mlx5_devx_cmd_query_hca_vdpa_attr(void *ctx,
 330                                   struct mlx5_hca_vdpa_attr *vdpa_attr)
 331 {
 332         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 333         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 334         void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 335         int status, syndrome, rc;
 336
 337         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 338         MLX5_SET(query_hca_cap_in, in, op_mod,
 339                  MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION |
 340                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 341         rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
 342         status = MLX5_GET(query_hca_cap_out, out, status);
 343         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 344         if (rc || status) {
 345                 RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities,"
 346                         " status %x, syndrome = %x", status, syndrome);
 347                 vdpa_attr->valid = 0;
 348         } else {
 349                 vdpa_attr->valid = 1;
 350                 vdpa_attr->desc_tunnel_offload_type =
 351                         MLX5_GET(virtio_emulation_cap, hcattr,
 352                                  desc_tunnel_offload_type);
 353                 vdpa_attr->eth_frame_offload_type =
 354                         MLX5_GET(virtio_emulation_cap, hcattr,
 355                                  eth_frame_offload_type);
 356                 vdpa_attr->virtio_version_1_0 =
 357                         MLX5_GET(virtio_emulation_cap, hcattr,
 358                                  virtio_version_1_0);
 359                 vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr,
 360                                                tso_ipv4);
 361                 vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr,
 362                                                tso_ipv6);
 363                 vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 364                                               tx_csum);
 365                 vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 366                                               rx_csum);
 367                 vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr,
 368                                                  event_mode);
 369                 vdpa_attr->virtio_queue_type =
 370                         MLX5_GET(virtio_emulation_cap, hcattr,
 371                                  virtio_queue_type);
 372                 vdpa_attr->log_doorbell_stride =
 373                         MLX5_GET(virtio_emulation_cap, hcattr,
 374                                  log_doorbell_stride);
 375                 vdpa_attr->log_doorbell_bar_size =
 376                         MLX5_GET(virtio_emulation_cap, hcattr,
 377                                  log_doorbell_bar_size);
 378                 vdpa_attr->doorbell_bar_offset =
 379                         MLX5_GET64(virtio_emulation_cap, hcattr,
 380                                    doorbell_bar_offset);
 381                 vdpa_attr->max_num_virtio_queues =
 382                         MLX5_GET(virtio_emulation_cap, hcattr,
 383                                  max_num_virtio_queues);
 384                 vdpa_attr->umems[0].a = MLX5_GET(virtio_emulation_cap, hcattr,
 385                                                  umem_1_buffer_param_a);
 386                 vdpa_attr->umems[0].b = MLX5_GET(virtio_emulation_cap, hcattr,
 387                                                  umem_1_buffer_param_b);
 388                 vdpa_attr->umems[1].a = MLX5_GET(virtio_emulation_cap, hcattr,
 389                                                  umem_2_buffer_param_a);
 390                 vdpa_attr->umems[1].b = MLX5_GET(virtio_emulation_cap, hcattr,
 391                                                  umem_2_buffer_param_b);
 392                 vdpa_attr->umems[2].a = MLX5_GET(virtio_emulation_cap, hcattr,
 393                                                  umem_3_buffer_param_a);
 394                 vdpa_attr->umems[2].b = MLX5_GET(virtio_emulation_cap, hcattr,
 395                                                  umem_3_buffer_param_b);
 396         }
 397 }
 398
 399 /**
 400  * Query HCA attributes.
 401  * Using those attributes we can check on run time if the device
 402  * is having the required capabilities.
 403  *
 404  * @param[in] ctx
 405  *   Context returned from mlx5 open_device() glue function.
 406  * @param[out] attr
 407  *   Attributes device values.
 408  *
 409  * @return
 410  *   0 on success, a negative value otherwise.
 411  */
 412 int
 413 mlx5_devx_cmd_query_hca_attr(void *ctx,
 414                              struct mlx5_hca_attr *attr)
 415 {
 416         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 417         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 418         void *hcattr;
 419         int status, syndrome, rc;
 420
 421         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 422         MLX5_SET(query_hca_cap_in, in, op_mod,
 423                  MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
 424                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 425
 426         rc = mlx5_glue->devx_general_cmd(ctx,
 427                                          in, sizeof(in), out, sizeof(out));
 428         if (rc)
 429                 goto error;
 430         status = MLX5_GET(query_hca_cap_out, out, status);
 431         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 432         if (status) {
 433                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 434                         "status %x, syndrome = %x",
 435                         status, syndrome);
 436                 return -1;
 437         }
 438         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 439         attr->flow_counter_bulk_alloc_bitmap =
 440                         MLX5_GET(cmd_hca_cap, hcattr, flow_counter_bulk_alloc);
 441         attr->flow_counters_dump = MLX5_GET(cmd_hca_cap, hcattr,
 442                                             flow_counters_dump);
 443         attr->log_max_rqt_size = MLX5_GET(cmd_hca_cap, hcattr,
 444                                           log_max_rqt_size);
 445         attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager);
 446         attr->hairpin = MLX5_GET(cmd_hca_cap, hcattr, hairpin);
 447         attr->log_max_hairpin_queues = MLX5_GET(cmd_hca_cap, hcattr,
 448                                                 log_max_hairpin_queues);
 449         attr->log_max_hairpin_wq_data_sz = MLX5_GET(cmd_hca_cap, hcattr,
 450                                                     log_max_hairpin_wq_data_sz);
 451         attr->log_max_hairpin_num_packets = MLX5_GET
 452                 (cmd_hca_cap, hcattr, log_min_hairpin_wq_data_sz);
 453         attr->vhca_id = MLX5_GET(cmd_hca_cap, hcattr, vhca_id);
 454         attr->relaxed_ordering_write = MLX5_GET(cmd_hca_cap, hcattr,
 455                         relaxed_ordering_write);
 456         attr->relaxed_ordering_read = MLX5_GET(cmd_hca_cap, hcattr,
 457                         relaxed_ordering_read);
 458         attr->eth_net_offloads = MLX5_GET(cmd_hca_cap, hcattr,
 459                                           eth_net_offloads);
 460         attr->eth_virt = MLX5_GET(cmd_hca_cap, hcattr, eth_virt);
 461         attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr,
 462                                                flex_parser_protocols);
 463         attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos);
 464         attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 465                                          general_obj_types) &
 466                               MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q);
 467         if (attr->qos.sup) {
 468                 MLX5_SET(query_hca_cap_in, in, op_mod,
 469                          MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
 470                          MLX5_HCA_CAP_OPMOD_GET_CUR);
 471                 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in),
 472                                                  out, sizeof(out));
 473                 if (rc)
 474                         goto error;
 475                 if (status) {
 476                         DRV_LOG(DEBUG, "Failed to query devx QOS capabilities,"
 477                                 " status %x, syndrome = %x",
 478                                 status, syndrome);
 479                         return -1;
 480                 }
 481                 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 482                 attr->qos.srtcm_sup =
 483                                 MLX5_GET(qos_cap, hcattr, flow_meter_srtcm);
 484                 attr->qos.log_max_flow_meter =
 485                                 MLX5_GET(qos_cap, hcattr, log_max_flow_meter);
 486                 attr->qos.flow_meter_reg_c_ids =
 487                         MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
 488                 attr->qos.flow_meter_reg_share =
 489                         MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
 490         }
 491         if (attr->vdpa.valid)
 492                 mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
 493         if (!attr->eth_net_offloads)
 494                 return 0;
 495
 496         /* Query HCA offloads for Ethernet protocol. */
 497         memset(in, 0, sizeof(in));
 498         memset(out, 0, sizeof(out));
 499         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 500         MLX5_SET(query_hca_cap_in, in, op_mod,
 501                  MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS |
 502                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 503
 504         rc = mlx5_glue->devx_general_cmd(ctx,
 505                                          in, sizeof(in),
 506                                          out, sizeof(out));
 507         if (rc) {
 508                 attr->eth_net_offloads = 0;
 509                 goto error;
 510         }
 511         status = MLX5_GET(query_hca_cap_out, out, status);
 512         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 513         if (status) {
 514                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 515                         "status %x, syndrome = %x",
 516                         status, syndrome);
 517                 attr->eth_net_offloads = 0;
 518                 return -1;
 519         }
 520         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 521         attr->wqe_vlan_insert = MLX5_GET(per_protocol_networking_offload_caps,
 522                                          hcattr, wqe_vlan_insert);
 523         attr->lro_cap = MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 524                                  lro_cap);
 525         attr->tunnel_lro_gre = MLX5_GET(per_protocol_networking_offload_caps,
 526                                         hcattr, tunnel_lro_gre);
 527         attr->tunnel_lro_vxlan = MLX5_GET(per_protocol_networking_offload_caps,
 528                                           hcattr, tunnel_lro_vxlan);
 529         attr->lro_max_msg_sz_mode = MLX5_GET
 530                                         (per_protocol_networking_offload_caps,
 531                                          hcattr, lro_max_msg_sz_mode);
 532         for (int i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
 533                 attr->lro_timer_supported_periods[i] =
 534                         MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 535                                  lro_timer_supported_periods[i]);
 536         }
 537         attr->tunnel_stateless_geneve_rx =
 538                             MLX5_GET(per_protocol_networking_offload_caps,
 539                                      hcattr, tunnel_stateless_geneve_rx);
 540         attr->geneve_max_opt_len =
 541                     MLX5_GET(per_protocol_networking_offload_caps,
 542                              hcattr, max_geneve_opt_len);
 543         attr->wqe_inline_mode = MLX5_GET(per_protocol_networking_offload_caps,
 544                                          hcattr, wqe_inline_mode);
 545         attr->tunnel_stateless_gtp = MLX5_GET
 546                                         (per_protocol_networking_offload_caps,
 547                                          hcattr, tunnel_stateless_gtp);
 548         if (attr->wqe_inline_mode != MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
 549                 return 0;
 550         if (attr->eth_virt) {
 551                 rc = mlx5_devx_cmd_query_nic_vport_context(ctx, 0, attr);
 552                 if (rc) {
 553                         attr->eth_virt = 0;
 554                         goto error;
 555                 }
 556         }
 557         return 0;
 558 error:
 559         rc = (rc > 0) ? -rc : rc;
 560         return rc;
 561 }
 562
 563 /**
 564  * Query TIS transport domain from QP verbs object using DevX API.
 565  *
 566  * @param[in] qp
 567  *   Pointer to verbs QP returned by ibv_create_qp .
 568  * @param[in] tis_num
 569  *   TIS number of TIS to query.
 570  * @param[out] tis_td
 571  *   Pointer to TIS transport domain variable, to be set by the routine.
 572  *
 573  * @return
 574  *   0 on success, a negative value otherwise.
 575  */
 576 int
 577 mlx5_devx_cmd_qp_query_tis_td(void *qp, uint32_t tis_num,
 578                               uint32_t *tis_td)
 579 {
 580         uint32_t in[MLX5_ST_SZ_DW(query_tis_in)] = {0};
 581         uint32_t out[MLX5_ST_SZ_DW(query_tis_out)] = {0};
 582         int rc;
 583         void *tis_ctx;
 584
 585         MLX5_SET(query_tis_in, in, opcode, MLX5_CMD_OP_QUERY_TIS);
 586         MLX5_SET(query_tis_in, in, tisn, tis_num);
 587         rc = mlx5_glue->devx_qp_query(qp, in, sizeof(in), out, sizeof(out));
 588         if (rc) {
 589                 DRV_LOG(ERR, "Failed to query QP using DevX");
 590                 return -rc;
 591         };
 592         tis_ctx = MLX5_ADDR_OF(query_tis_out, out, tis_context);
 593         *tis_td = MLX5_GET(tisc, tis_ctx, transport_domain);
 594         return 0;
 595 }
 596
 597 /**
 598  * Fill WQ data for DevX API command.
 599  * Utility function for use when creating DevX objects containing a WQ.
 600  *
 601  * @param[in] wq_ctx
 602  *   Pointer to WQ context to fill with data.
 603  * @param [in] wq_attr
 604  *   Pointer to WQ attributes structure to fill in WQ context.
 605  */
 606 static void
 607 devx_cmd_fill_wq_data(void *wq_ctx, struct mlx5_devx_wq_attr *wq_attr)
 608 {
 609         MLX5_SET(wq, wq_ctx, wq_type, wq_attr->wq_type);
 610         MLX5_SET(wq, wq_ctx, wq_signature, wq_attr->wq_signature);
 611         MLX5_SET(wq, wq_ctx, end_padding_mode, wq_attr->end_padding_mode);
 612         MLX5_SET(wq, wq_ctx, cd_slave, wq_attr->cd_slave);
 613         MLX5_SET(wq, wq_ctx, hds_skip_first_sge, wq_attr->hds_skip_first_sge);
 614         MLX5_SET(wq, wq_ctx, log2_hds_buf_size, wq_attr->log2_hds_buf_size);
 615         MLX5_SET(wq, wq_ctx, page_offset, wq_attr->page_offset);
 616         MLX5_SET(wq, wq_ctx, lwm, wq_attr->lwm);
 617         MLX5_SET(wq, wq_ctx, pd, wq_attr->pd);
 618         MLX5_SET(wq, wq_ctx, uar_page, wq_attr->uar_page);
 619         MLX5_SET64(wq, wq_ctx, dbr_addr, wq_attr->dbr_addr);
 620         MLX5_SET(wq, wq_ctx, hw_counter, wq_attr->hw_counter);
 621         MLX5_SET(wq, wq_ctx, sw_counter, wq_attr->sw_counter);
 622         MLX5_SET(wq, wq_ctx, log_wq_stride, wq_attr->log_wq_stride);
 623         MLX5_SET(wq, wq_ctx, log_wq_pg_sz, wq_attr->log_wq_pg_sz);
 624         MLX5_SET(wq, wq_ctx, log_wq_sz, wq_attr->log_wq_sz);
 625         MLX5_SET(wq, wq_ctx, dbr_umem_valid, wq_attr->dbr_umem_valid);
 626         MLX5_SET(wq, wq_ctx, wq_umem_valid, wq_attr->wq_umem_valid);
 627         MLX5_SET(wq, wq_ctx, log_hairpin_num_packets,
 628                  wq_attr->log_hairpin_num_packets);
 629         MLX5_SET(wq, wq_ctx, log_hairpin_data_sz, wq_attr->log_hairpin_data_sz);
 630         MLX5_SET(wq, wq_ctx, single_wqe_log_num_of_strides,
 631                  wq_attr->single_wqe_log_num_of_strides);
 632         MLX5_SET(wq, wq_ctx, two_byte_shift_en, wq_attr->two_byte_shift_en);
 633         MLX5_SET(wq, wq_ctx, single_stride_log_num_of_bytes,
 634                  wq_attr->single_stride_log_num_of_bytes);
 635         MLX5_SET(wq, wq_ctx, dbr_umem_id, wq_attr->dbr_umem_id);
 636         MLX5_SET(wq, wq_ctx, wq_umem_id, wq_attr->wq_umem_id);
 637         MLX5_SET64(wq, wq_ctx, wq_umem_offset, wq_attr->wq_umem_offset);
 638 }
 639
 640 /**
 641  * Create RQ using DevX API.
 642  *
 643  * @param[in] ctx
 644  *   Context returned from mlx5 open_device() glue function.
 645  * @param [in] rq_attr
 646  *   Pointer to create RQ attributes structure.
 647  * @param [in] socket
 648  *   CPU socket ID for allocations.
 649  *
 650  * @return
 651  *   The DevX object created, NULL otherwise and rte_errno is set.
 652  */
 653 struct mlx5_devx_obj *
 654 mlx5_devx_cmd_create_rq(void *ctx,
 655                         struct mlx5_devx_create_rq_attr *rq_attr,
 656                         int socket)
 657 {
 658         uint32_t in[MLX5_ST_SZ_DW(create_rq_in)] = {0};
 659         uint32_t out[MLX5_ST_SZ_DW(create_rq_out)] = {0};
 660         void *rq_ctx, *wq_ctx;
 661         struct mlx5_devx_wq_attr *wq_attr;
 662         struct mlx5_devx_obj *rq = NULL;
 663
 664         rq = rte_calloc_socket(__func__, 1, sizeof(*rq), 0, socket);
 665         if (!rq) {
 666                 DRV_LOG(ERR, "Failed to allocate RQ data");
 667                 rte_errno = ENOMEM;
 668                 return NULL;
 669         }
 670         MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ);
 671         rq_ctx = MLX5_ADDR_OF(create_rq_in, in, ctx);
 672         MLX5_SET(rqc, rq_ctx, rlky, rq_attr->rlky);
 673         MLX5_SET(rqc, rq_ctx, delay_drop_en, rq_attr->delay_drop_en);
 674         MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
 675         MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
 676         MLX5_SET(rqc, rq_ctx, mem_rq_type, rq_attr->mem_rq_type);
 677         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
 678         MLX5_SET(rqc, rq_ctx, flush_in_error_en, rq_attr->flush_in_error_en);
 679         MLX5_SET(rqc, rq_ctx, hairpin, rq_attr->hairpin);
 680         MLX5_SET(rqc, rq_ctx, user_index, rq_attr->user_index);
 681         MLX5_SET(rqc, rq_ctx, cqn, rq_attr->cqn);
 682         MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
 683         MLX5_SET(rqc, rq_ctx, rmpn, rq_attr->rmpn);
 684         wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
 685         wq_attr = &rq_attr->wq_attr;
 686         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
 687         rq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 688                                                   out, sizeof(out));
 689         if (!rq->obj) {
 690                 DRV_LOG(ERR, "Failed to create RQ using DevX");
 691                 rte_errno = errno;
 692                 rte_free(rq);
 693                 return NULL;
 694         }
 695         rq->id = MLX5_GET(create_rq_out, out, rqn);
 696         return rq;
 697 }
 698
 699 /**
 700  * Modify RQ using DevX API.
 701  *
 702  * @param[in] rq
 703  *   Pointer to RQ object structure.
 704  * @param [in] rq_attr
 705  *   Pointer to modify RQ attributes structure.
 706  *
 707  * @return
 708  *   0 on success, a negative errno value otherwise and rte_errno is set.
 709  */
 710 int
 711 mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
 712                         struct mlx5_devx_modify_rq_attr *rq_attr)
 713 {
 714         uint32_t in[MLX5_ST_SZ_DW(modify_rq_in)] = {0};
 715         uint32_t out[MLX5_ST_SZ_DW(modify_rq_out)] = {0};
 716         void *rq_ctx, *wq_ctx;
 717         int ret;
 718
 719         MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ);
 720         MLX5_SET(modify_rq_in, in, rq_state, rq_attr->rq_state);
 721         MLX5_SET(modify_rq_in, in, rqn, rq->id);
 722         MLX5_SET64(modify_rq_in, in, modify_bitmask, rq_attr->modify_bitmask);
 723         rq_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
 724         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
 725         if (rq_attr->modify_bitmask &
 726                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_SCATTER_FCS)
 727                 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
 728         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD)
 729                 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
 730         if (rq_attr->modify_bitmask &
 731                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID)
 732                 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
 733         MLX5_SET(rqc, rq_ctx, hairpin_peer_sq, rq_attr->hairpin_peer_sq);
 734         MLX5_SET(rqc, rq_ctx, hairpin_peer_vhca, rq_attr->hairpin_peer_vhca);
 735         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_WQ_LWM) {
 736                 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
 737                 MLX5_SET(wq, wq_ctx, lwm, rq_attr->lwm);
 738         }
 739         ret = mlx5_glue->devx_obj_modify(rq->obj, in, sizeof(in),
 740                                          out, sizeof(out));
 741         if (ret) {
 742                 DRV_LOG(ERR, "Failed to modify RQ using DevX");
 743                 rte_errno = errno;
 744                 return -errno;
 745         }
 746         return ret;
 747 }
 748
 749 /**
 750  * Create TIR using DevX API.
 751  *
 752  * @param[in] ctx
 753  *  Context returned from mlx5 open_device() glue function.
 754  * @param [in] tir_attr
 755  *   Pointer to TIR attributes structure.
 756  *
 757  * @return
 758  *   The DevX object created, NULL otherwise and rte_errno is set.
 759  */
 760 struct mlx5_devx_obj *
 761 mlx5_devx_cmd_create_tir(void *ctx,
 762                          struct mlx5_devx_tir_attr *tir_attr)
 763 {
 764         uint32_t in[MLX5_ST_SZ_DW(create_tir_in)] = {0};
 765         uint32_t out[MLX5_ST_SZ_DW(create_tir_out)] = {0};
 766         void *tir_ctx, *outer, *inner, *rss_key;
 767         struct mlx5_devx_obj *tir = NULL;
 768
 769         tir = rte_calloc(__func__, 1, sizeof(*tir), 0);
 770         if (!tir) {
 771                 DRV_LOG(ERR, "Failed to allocate TIR data");
 772                 rte_errno = ENOMEM;
 773                 return NULL;
 774         }
 775         MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
 776         tir_ctx = MLX5_ADDR_OF(create_tir_in, in, ctx);
 777         MLX5_SET(tirc, tir_ctx, disp_type, tir_attr->disp_type);
 778         MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
 779                  tir_attr->lro_timeout_period_usecs);
 780         MLX5_SET(tirc, tir_ctx, lro_enable_mask, tir_attr->lro_enable_mask);
 781         MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, tir_attr->lro_max_msg_sz);
 782         MLX5_SET(tirc, tir_ctx, inline_rqn, tir_attr->inline_rqn);
 783         MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, tir_attr->rx_hash_symmetric);
 784         MLX5_SET(tirc, tir_ctx, tunneled_offload_en,
 785                  tir_attr->tunneled_offload_en);
 786         MLX5_SET(tirc, tir_ctx, indirect_table, tir_attr->indirect_table);
 787         MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
 788         MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
 789         MLX5_SET(tirc, tir_ctx, transport_domain, tir_attr->transport_domain);
 790         rss_key = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_toeplitz_key);
 791         memcpy(rss_key, tir_attr->rx_hash_toeplitz_key, MLX5_RSS_HASH_KEY_LEN);
 792         outer = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_outer);
 793         MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
 794                  tir_attr->rx_hash_field_selector_outer.l3_prot_type);
 795         MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
 796                  tir_attr->rx_hash_field_selector_outer.l4_prot_type);
 797         MLX5_SET(rx_hash_field_select, outer, selected_fields,
 798                  tir_attr->rx_hash_field_selector_outer.selected_fields);
 799         inner = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_inner);
 800         MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
 801                  tir_attr->rx_hash_field_selector_inner.l3_prot_type);
 802         MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
 803                  tir_attr->rx_hash_field_selector_inner.l4_prot_type);
 804         MLX5_SET(rx_hash_field_select, inner, selected_fields,
 805                  tir_attr->rx_hash_field_selector_inner.selected_fields);
 806         tir->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 807                                                    out, sizeof(out));
 808         if (!tir->obj) {
 809                 DRV_LOG(ERR, "Failed to create TIR using DevX");
 810                 rte_errno = errno;
 811                 rte_free(tir);
 812                 return NULL;
 813         }
 814         tir->id = MLX5_GET(create_tir_out, out, tirn);
 815         return tir;
 816 }
 817
 818 /**
 819  * Create RQT using DevX API.
 820  *
 821  * @param[in] ctx
 822  *   Context returned from mlx5 open_device() glue function.
 823  * @param [in] rqt_attr
 824  *   Pointer to RQT attributes structure.
 825  *
 826  * @return
 827  *   The DevX object created, NULL otherwise and rte_errno is set.
 828  */
 829 struct mlx5_devx_obj *
 830 mlx5_devx_cmd_create_rqt(void *ctx,
 831                          struct mlx5_devx_rqt_attr *rqt_attr)
 832 {
 833         uint32_t *in = NULL;
 834         uint32_t inlen = MLX5_ST_SZ_BYTES(create_rqt_in) +
 835                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
 836         uint32_t out[MLX5_ST_SZ_DW(create_rqt_out)] = {0};
 837         void *rqt_ctx;
 838         struct mlx5_devx_obj *rqt = NULL;
 839         int i;
 840
 841         in = rte_calloc(__func__, 1, inlen, 0);
 842         if (!in) {
 843                 DRV_LOG(ERR, "Failed to allocate RQT IN data");
 844                 rte_errno = ENOMEM;
 845                 return NULL;
 846         }
 847         rqt = rte_calloc(__func__, 1, sizeof(*rqt), 0);
 848         if (!rqt) {
 849                 DRV_LOG(ERR, "Failed to allocate RQT data");
 850                 rte_errno = ENOMEM;
 851                 rte_free(in);
 852                 return NULL;
 853         }
 854         MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT);
 855         rqt_ctx = MLX5_ADDR_OF(create_rqt_in, in, rqt_context);
 856         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
 857         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
 858         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
 859         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
 860                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
 861         rqt->obj = mlx5_glue->devx_obj_create(ctx, in, inlen, out, sizeof(out));
 862         rte_free(in);
 863         if (!rqt->obj) {
 864                 DRV_LOG(ERR, "Failed to create RQT using DevX");
 865                 rte_errno = errno;
 866                 rte_free(rqt);
 867                 return NULL;
 868         }
 869         rqt->id = MLX5_GET(create_rqt_out, out, rqtn);
 870         return rqt;
 871 }
 872
 873 /**
 874  * Modify RQT using DevX API.
 875  *
 876  * @param[in] rqt
 877  *   Pointer to RQT DevX object structure.
 878  * @param [in] rqt_attr
 879  *   Pointer to RQT attributes structure.
 880  *
 881  * @return
 882  *   0 on success, a negative errno value otherwise and rte_errno is set.
 883  */
 884 int
 885 mlx5_devx_cmd_modify_rqt(struct mlx5_devx_obj *rqt,
 886                          struct mlx5_devx_rqt_attr *rqt_attr)
 887 {
 888         uint32_t inlen = MLX5_ST_SZ_BYTES(modify_rqt_in) +
 889                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
 890         uint32_t out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0};
 891         uint32_t *in = rte_calloc(__func__, 1, inlen, 0);
 892         void *rqt_ctx;
 893         int i;
 894         int ret;
 895
 896         if (!in) {
 897                 DRV_LOG(ERR, "Failed to allocate RQT modify IN data.");
 898                 rte_errno = ENOMEM;
 899                 return -ENOMEM;
 900         }
 901         MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT);
 902         MLX5_SET(modify_rqt_in, in, rqtn, rqt->id);
 903         MLX5_SET64(modify_rqt_in, in, modify_bitmask, 0x1);
 904         rqt_ctx = MLX5_ADDR_OF(modify_rqt_in, in, rqt_context);
 905         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
 906         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
 907         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
 908         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
 909                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
 910         ret = mlx5_glue->devx_obj_modify(rqt->obj, in, inlen, out, sizeof(out));
 911         rte_free(in);
 912         if (ret) {
 913                 DRV_LOG(ERR, "Failed to modify RQT using DevX.");
 914                 rte_errno = errno;
 915                 return -rte_errno;
 916         }
 917         return ret;
 918 }
 919
 920 /**
 921  * Create SQ using DevX API.
 922  *
 923  * @param[in] ctx
 924  *   Context returned from mlx5 open_device() glue function.
 925  * @param [in] sq_attr
 926  *   Pointer to SQ attributes structure.
 927  * @param [in] socket
 928  *   CPU socket ID for allocations.
 929  *
 930  * @return
 931  *   The DevX object created, NULL otherwise and rte_errno is set.
 932  **/
 933 struct mlx5_devx_obj *
 934 mlx5_devx_cmd_create_sq(void *ctx,
 935                         struct mlx5_devx_create_sq_attr *sq_attr)
 936 {
 937         uint32_t in[MLX5_ST_SZ_DW(create_sq_in)] = {0};
 938         uint32_t out[MLX5_ST_SZ_DW(create_sq_out)] = {0};
 939         void *sq_ctx;
 940         void *wq_ctx;
 941         struct mlx5_devx_wq_attr *wq_attr;
 942         struct mlx5_devx_obj *sq = NULL;
 943
 944         sq = rte_calloc(__func__, 1, sizeof(*sq), 0);
 945         if (!sq) {
 946                 DRV_LOG(ERR, "Failed to allocate SQ data");
 947                 rte_errno = ENOMEM;
 948                 return NULL;
 949         }
 950         MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
 951         sq_ctx = MLX5_ADDR_OF(create_sq_in, in, ctx);
 952         MLX5_SET(sqc, sq_ctx, rlky, sq_attr->rlky);
 953         MLX5_SET(sqc, sq_ctx, cd_master, sq_attr->cd_master);
 954         MLX5_SET(sqc, sq_ctx, fre, sq_attr->fre);
 955         MLX5_SET(sqc, sq_ctx, flush_in_error_en, sq_attr->flush_in_error_en);
 956         MLX5_SET(sqc, sq_ctx, allow_multi_pkt_send_wqe,
 957                  sq_attr->flush_in_error_en);
 958         MLX5_SET(sqc, sq_ctx, min_wqe_inline_mode,
 959                  sq_attr->min_wqe_inline_mode);
 960         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
 961         MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr);
 962         MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp);
 963         MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin);
 964         MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index);
 965         MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn);
 966         MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index,
 967                  sq_attr->packet_pacing_rate_limit_index);
 968         MLX5_SET(sqc, sq_ctx, tis_lst_sz, sq_attr->tis_lst_sz);
 969         MLX5_SET(sqc, sq_ctx, tis_num_0, sq_attr->tis_num);
 970         wq_ctx = MLX5_ADDR_OF(sqc, sq_ctx, wq);
 971         wq_attr = &sq_attr->wq_attr;
 972         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
 973         sq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 974                                              out, sizeof(out));
 975         if (!sq->obj) {
 976                 DRV_LOG(ERR, "Failed to create SQ using DevX");
 977                 rte_errno = errno;
 978                 rte_free(sq);
 979                 return NULL;
 980         }
 981         sq->id = MLX5_GET(create_sq_out, out, sqn);
 982         return sq;
 983 }
 984
 985 /**
 986  * Modify SQ using DevX API.
 987  *
 988  * @param[in] sq
 989  *   Pointer to SQ object structure.
 990  * @param [in] sq_attr
 991  *   Pointer to SQ attributes structure.
 992  *
 993  * @return
 994  *   0 on success, a negative errno value otherwise and rte_errno is set.
 995  */
 996 int
 997 mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq,
 998                         struct mlx5_devx_modify_sq_attr *sq_attr)
 999 {
1000         uint32_t in[MLX5_ST_SZ_DW(modify_sq_in)] = {0};
1001         uint32_t out[MLX5_ST_SZ_DW(modify_sq_out)] = {0};
1002         void *sq_ctx;
1003         int ret;
1004
1005         MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ);
1006         MLX5_SET(modify_sq_in, in, sq_state, sq_attr->sq_state);
1007         MLX5_SET(modify_sq_in, in, sqn, sq->id);
1008         sq_ctx = MLX5_ADDR_OF(modify_sq_in, in, ctx);
1009         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1010         MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq);
1011         MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca);
1012         ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in),
1013                                          out, sizeof(out));
1014         if (ret) {
1015                 DRV_LOG(ERR, "Failed to modify SQ using DevX");
1016                 rte_errno = errno;
1017                 return -errno;
1018         }
1019         return ret;
1020 }
1021
1022 /**
1023  * Create TIS using DevX API.
1024  *
1025  * @param[in] ctx
1026  *   Context returned from mlx5 open_device() glue function.
1027  * @param [in] tis_attr
1028  *   Pointer to TIS attributes structure.
1029  *
1030  * @return
1031  *   The DevX object created, NULL otherwise and rte_errno is set.
1032  */
1033 struct mlx5_devx_obj *
1034 mlx5_devx_cmd_create_tis(void *ctx,
1035                          struct mlx5_devx_tis_attr *tis_attr)
1036 {
1037         uint32_t in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
1038         uint32_t out[MLX5_ST_SZ_DW(create_tis_out)] = {0};
1039         struct mlx5_devx_obj *tis = NULL;
1040         void *tis_ctx;
1041
1042         tis = rte_calloc(__func__, 1, sizeof(*tis), 0);
1043         if (!tis) {
1044                 DRV_LOG(ERR, "Failed to allocate TIS object");
1045                 rte_errno = ENOMEM;
1046                 return NULL;
1047         }
1048         MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS);
1049         tis_ctx = MLX5_ADDR_OF(create_tis_in, in, ctx);
1050         MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1051                  tis_attr->strict_lag_tx_port_affinity);
1052         MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1053                  tis_attr->strict_lag_tx_port_affinity);
1054         MLX5_SET(tisc, tis_ctx, prio, tis_attr->prio);
1055         MLX5_SET(tisc, tis_ctx, transport_domain,
1056                  tis_attr->transport_domain);
1057         tis->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1058                                               out, sizeof(out));
1059         if (!tis->obj) {
1060                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1061                 rte_errno = errno;
1062                 rte_free(tis);
1063                 return NULL;
1064         }
1065         tis->id = MLX5_GET(create_tis_out, out, tisn);
1066         return tis;
1067 }
1068
1069 /**
1070  * Create transport domain using DevX API.
1071  *
1072  * @param[in] ctx
1073  *   Context returned from mlx5 open_device() glue function.
1074  * @return
1075  *   The DevX object created, NULL otherwise and rte_errno is set.
1076  */
1077 struct mlx5_devx_obj *
1078 mlx5_devx_cmd_create_td(void *ctx)
1079 {
1080         uint32_t in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {0};
1081         uint32_t out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0};
1082         struct mlx5_devx_obj *td = NULL;
1083
1084         td = rte_calloc(__func__, 1, sizeof(*td), 0);
1085         if (!td) {
1086                 DRV_LOG(ERR, "Failed to allocate TD object");
1087                 rte_errno = ENOMEM;
1088                 return NULL;
1089         }
1090         MLX5_SET(alloc_transport_domain_in, in, opcode,
1091                  MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN);
1092         td->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1093                                              out, sizeof(out));
1094         if (!td->obj) {
1095                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1096                 rte_errno = errno;
1097                 rte_free(td);
1098                 return NULL;
1099         }
1100         td->id = MLX5_GET(alloc_transport_domain_out, out,
1101                            transport_domain);
1102         return td;
1103 }
1104
1105 /**
1106  * Dump all flows to file.
1107  *
1108  * @param[in] fdb_domain
1109  *   FDB domain.
1110  * @param[in] rx_domain
1111  *   RX domain.
1112  * @param[in] tx_domain
1113  *   TX domain.
1114  * @param[out] file
1115  *   Pointer to file stream.
1116  *
1117  * @return
1118  *   0 on success, a nagative value otherwise.
1119  */
1120 int
1121 mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused,
1122                         void *rx_domain __rte_unused,
1123                         void *tx_domain __rte_unused, FILE *file __rte_unused)
1124 {
1125         int ret = 0;
1126
1127 #ifdef HAVE_MLX5_DR_FLOW_DUMP
1128         if (fdb_domain) {
1129                 ret = mlx5_glue->dr_dump_domain(file, fdb_domain);
1130                 if (ret)
1131                         return ret;
1132         }
1133         MLX5_ASSERT(rx_domain);
1134         ret = mlx5_glue->dr_dump_domain(file, rx_domain);
1135         if (ret)
1136                 return ret;
1137         MLX5_ASSERT(tx_domain);
1138         ret = mlx5_glue->dr_dump_domain(file, tx_domain);
1139 #else
1140         ret = ENOTSUP;
1141 #endif
1142         return -ret;
1143 }
1144
1145 /*
1146  * Create CQ using DevX API.
1147  *
1148  * @param[in] ctx
1149  *   Context returned from mlx5 open_device() glue function.
1150  * @param [in] attr
1151  *   Pointer to CQ attributes structure.
1152  *
1153  * @return
1154  *   The DevX object created, NULL otherwise and rte_errno is set.
1155  */
1156 struct mlx5_devx_obj *
1157 mlx5_devx_cmd_create_cq(void *ctx, struct mlx5_devx_cq_attr *attr)
1158 {
1159         uint32_t in[MLX5_ST_SZ_DW(create_cq_in)] = {0};
1160         uint32_t out[MLX5_ST_SZ_DW(create_cq_out)] = {0};
1161         struct mlx5_devx_obj *cq_obj = rte_zmalloc(__func__, sizeof(*cq_obj),
1162                                                    0);
1163         void *cqctx = MLX5_ADDR_OF(create_cq_in, in, cq_context);
1164
1165         if (!cq_obj) {
1166                 DRV_LOG(ERR, "Failed to allocate CQ object memory.");
1167                 rte_errno = ENOMEM;
1168                 return NULL;
1169         }
1170         MLX5_SET(create_cq_in, in, opcode, MLX5_CMD_OP_CREATE_CQ);
1171         if (attr->db_umem_valid) {
1172                 MLX5_SET(cqc, cqctx, dbr_umem_valid, attr->db_umem_valid);
1173                 MLX5_SET(cqc, cqctx, dbr_umem_id, attr->db_umem_id);
1174                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_umem_offset);
1175         } else {
1176                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr);
1177         }
1178         MLX5_SET(cqc, cqctx, cc, attr->use_first_only);
1179         MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore);
1180         MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size);
1181         MLX5_SET(cqc, cqctx, log_page_size, attr->log_page_size -
1182                  MLX5_ADAPTER_PAGE_SHIFT);
1183         MLX5_SET(cqc, cqctx, c_eqn, attr->eqn);
1184         MLX5_SET(cqc, cqctx, uar_page, attr->uar_page_id);
1185         if (attr->q_umem_valid) {
1186                 MLX5_SET(create_cq_in, in, cq_umem_valid, attr->q_umem_valid);
1187                 MLX5_SET(create_cq_in, in, cq_umem_id, attr->q_umem_id);
1188                 MLX5_SET64(create_cq_in, in, cq_umem_offset,
1189                            attr->q_umem_offset);
1190         }
1191         cq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1192                                                  sizeof(out));
1193         if (!cq_obj->obj) {
1194                 rte_errno = errno;
1195                 DRV_LOG(ERR, "Failed to create CQ using DevX errno=%d.", errno);
1196                 rte_free(cq_obj);
1197                 return NULL;
1198         }
1199         cq_obj->id = MLX5_GET(create_cq_out, out, cqn);
1200         return cq_obj;
1201 }
1202
1203 /**
1204  * Create VIRTQ using DevX API.
1205  *
1206  * @param[in] ctx
1207  *   Context returned from mlx5 open_device() glue function.
1208  * @param [in] attr
1209  *   Pointer to VIRTQ attributes structure.
1210  *
1211  * @return
1212  *   The DevX object created, NULL otherwise and rte_errno is set.
1213  */
1214 struct mlx5_devx_obj *
1215 mlx5_devx_cmd_create_virtq(void *ctx,
1216                            struct mlx5_devx_virtq_attr *attr)
1217 {
1218         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1219         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1220         struct mlx5_devx_obj *virtq_obj = rte_zmalloc(__func__,
1221                                                      sizeof(*virtq_obj), 0);
1222         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1223         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1224         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1225
1226         if (!virtq_obj) {
1227                 DRV_LOG(ERR, "Failed to allocate virtq data.");
1228                 rte_errno = ENOMEM;
1229                 return NULL;
1230         }
1231         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1232                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1233         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1234                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1235         MLX5_SET16(virtio_net_q, virtq, hw_available_index,
1236                    attr->hw_available_index);
1237         MLX5_SET16(virtio_net_q, virtq, hw_used_index, attr->hw_used_index);
1238         MLX5_SET16(virtio_net_q, virtq, tso_ipv4, attr->tso_ipv4);
1239         MLX5_SET16(virtio_net_q, virtq, tso_ipv6, attr->tso_ipv6);
1240         MLX5_SET16(virtio_net_q, virtq, tx_csum, attr->tx_csum);
1241         MLX5_SET16(virtio_net_q, virtq, rx_csum, attr->rx_csum);
1242         MLX5_SET16(virtio_q, virtctx, virtio_version_1_0,
1243                    attr->virtio_version_1_0);
1244         MLX5_SET16(virtio_q, virtctx, event_mode, attr->event_mode);
1245         MLX5_SET(virtio_q, virtctx, event_qpn_or_msix, attr->qp_id);
1246         MLX5_SET64(virtio_q, virtctx, desc_addr, attr->desc_addr);
1247         MLX5_SET64(virtio_q, virtctx, used_addr, attr->used_addr);
1248         MLX5_SET64(virtio_q, virtctx, available_addr, attr->available_addr);
1249         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1250         MLX5_SET16(virtio_q, virtctx, queue_size, attr->q_size);
1251         MLX5_SET(virtio_q, virtctx, virtio_q_mkey, attr->mkey);
1252         MLX5_SET(virtio_q, virtctx, umem_1_id, attr->umems[0].id);
1253         MLX5_SET(virtio_q, virtctx, umem_1_size, attr->umems[0].size);
1254         MLX5_SET64(virtio_q, virtctx, umem_1_offset, attr->umems[0].offset);
1255         MLX5_SET(virtio_q, virtctx, umem_2_id, attr->umems[1].id);
1256         MLX5_SET(virtio_q, virtctx, umem_2_size, attr->umems[1].size);
1257         MLX5_SET64(virtio_q, virtctx, umem_2_offset, attr->umems[1].offset);
1258         MLX5_SET(virtio_q, virtctx, umem_3_id, attr->umems[2].id);
1259         MLX5_SET(virtio_q, virtctx, umem_3_size, attr->umems[2].size);
1260         MLX5_SET64(virtio_q, virtctx, umem_3_offset, attr->umems[2].offset);
1261         MLX5_SET(virtio_net_q, virtq, tisn_or_qpn, attr->tis_id);
1262         virtq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1263                                                     sizeof(out));
1264         if (!virtq_obj->obj) {
1265                 rte_errno = errno;
1266                 DRV_LOG(ERR, "Failed to create VIRTQ Obj using DevX.");
1267                 rte_free(virtq_obj);
1268                 return NULL;
1269         }
1270         virtq_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1271         return virtq_obj;
1272 }
1273
1274 /**
1275  * Modify VIRTQ using DevX API.
1276  *
1277  * @param[in] virtq_obj
1278  *   Pointer to virtq object structure.
1279  * @param [in] attr
1280  *   Pointer to modify virtq attributes structure.
1281  *
1282  * @return
1283  *   0 on success, a negative errno value otherwise and rte_errno is set.
1284  */
1285 int
1286 mlx5_devx_cmd_modify_virtq(struct mlx5_devx_obj *virtq_obj,
1287                            struct mlx5_devx_virtq_attr *attr)
1288 {
1289         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1290         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1291         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1292         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1293         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1294         int ret;
1295
1296         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1297                  MLX5_CMD_OP_MODIFY_GENERAL_OBJECT);
1298         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1299                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1300         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1301         MLX5_SET64(virtio_net_q, virtq, modify_field_select, attr->type);
1302         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1303         switch (attr->type) {
1304         case MLX5_VIRTQ_MODIFY_TYPE_STATE:
1305                 MLX5_SET16(virtio_net_q, virtq, state, attr->state);
1306                 break;
1307         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS:
1308                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_mkey,
1309                          attr->dirty_bitmap_mkey);
1310                 MLX5_SET64(virtio_net_q, virtq, dirty_bitmap_addr,
1311                          attr->dirty_bitmap_addr);
1312                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_size,
1313                          attr->dirty_bitmap_size);
1314                 break;
1315         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE:
1316                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_dump_enable,
1317                          attr->dirty_bitmap_dump_enable);
1318                 break;
1319         default:
1320                 rte_errno = EINVAL;
1321                 return -rte_errno;
1322         }
1323         ret = mlx5_glue->devx_obj_modify(virtq_obj->obj, in, sizeof(in),
1324                                          out, sizeof(out));
1325         if (ret) {
1326                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1327                 rte_errno = errno;
1328                 return -errno;
1329         }
1330         return ret;
1331 }
1332
1333 /**
1334  * Query VIRTQ using DevX API.
1335  *
1336  * @param[in] virtq_obj
1337  *   Pointer to virtq object structure.
1338  * @param [in/out] attr
1339  *   Pointer to virtq attributes structure.
1340  *
1341  * @return
1342  *   0 on success, a negative errno value otherwise and rte_errno is set.
1343  */
1344 int
1345 mlx5_devx_cmd_query_virtq(struct mlx5_devx_obj *virtq_obj,
1346                            struct mlx5_devx_virtq_attr *attr)
1347 {
1348         uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1349         uint32_t out[MLX5_ST_SZ_DW(query_virtq_out)] = {0};
1350         void *hdr = MLX5_ADDR_OF(query_virtq_out, in, hdr);
1351         void *virtq = MLX5_ADDR_OF(query_virtq_out, out, virtq);
1352         int ret;
1353
1354         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1355                  MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1356         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1357                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1358         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1359         ret = mlx5_glue->devx_obj_query(virtq_obj->obj, in, sizeof(in),
1360                                          out, sizeof(out));
1361         if (ret) {
1362                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1363                 rte_errno = errno;
1364                 return -errno;
1365         }
1366         attr->hw_available_index = MLX5_GET16(virtio_net_q, virtq,
1367                                               hw_available_index);
1368         attr->hw_used_index = MLX5_GET16(virtio_net_q, virtq, hw_used_index);
1369         return ret;
1370 }
1371
1372 /**
1373  * Create QP using DevX API.
1374  *
1375  * @param[in] ctx
1376  *   Context returned from mlx5 open_device() glue function.
1377  * @param [in] attr
1378  *   Pointer to QP attributes structure.
1379  *
1380  * @return
1381  *   The DevX object created, NULL otherwise and rte_errno is set.
1382  */
1383 struct mlx5_devx_obj *
1384 mlx5_devx_cmd_create_qp(void *ctx,
1385                         struct mlx5_devx_qp_attr *attr)
1386 {
1387         uint32_t in[MLX5_ST_SZ_DW(create_qp_in)] = {0};
1388         uint32_t out[MLX5_ST_SZ_DW(create_qp_out)] = {0};
1389         struct mlx5_devx_obj *qp_obj = rte_zmalloc(__func__, sizeof(*qp_obj),
1390                                                    0);
1391         void *qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
1392
1393         if (!qp_obj) {
1394                 DRV_LOG(ERR, "Failed to allocate QP data.");
1395                 rte_errno = ENOMEM;
1396                 return NULL;
1397         }
1398         MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
1399         MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
1400         MLX5_SET(qpc, qpc, pd, attr->pd);
1401         if (attr->uar_index) {
1402                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1403                 MLX5_SET(qpc, qpc, uar_page, attr->uar_index);
1404                 MLX5_SET(qpc, qpc, log_page_size, attr->log_page_size -
1405                          MLX5_ADAPTER_PAGE_SHIFT);
1406                 if (attr->sq_size) {
1407                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->sq_size));
1408                         MLX5_SET(qpc, qpc, cqn_snd, attr->cqn);
1409                         MLX5_SET(qpc, qpc, log_sq_size,
1410                                  rte_log2_u32(attr->sq_size));
1411                 } else {
1412                         MLX5_SET(qpc, qpc, no_sq, 1);
1413                 }
1414                 if (attr->rq_size) {
1415                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->rq_size));
1416                         MLX5_SET(qpc, qpc, cqn_rcv, attr->cqn);
1417                         MLX5_SET(qpc, qpc, log_rq_stride, attr->log_rq_stride -
1418                                  MLX5_LOG_RQ_STRIDE_SHIFT);
1419                         MLX5_SET(qpc, qpc, log_rq_size,
1420                                  rte_log2_u32(attr->rq_size));
1421                         MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ);
1422                 } else {
1423                         MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1424                 }
1425                 if (attr->dbr_umem_valid) {
1426                         MLX5_SET(qpc, qpc, dbr_umem_valid,
1427                                  attr->dbr_umem_valid);
1428                         MLX5_SET(qpc, qpc, dbr_umem_id, attr->dbr_umem_id);
1429                 }
1430                 MLX5_SET64(qpc, qpc, dbr_addr, attr->dbr_address);
1431                 MLX5_SET64(create_qp_in, in, wq_umem_offset,
1432                            attr->wq_umem_offset);
1433                 MLX5_SET(create_qp_in, in, wq_umem_id, attr->wq_umem_id);
1434                 MLX5_SET(create_qp_in, in, wq_umem_valid, 1);
1435         } else {
1436                 /* Special QP to be managed by FW - no SQ\RQ\CQ\UAR\DB rec. */
1437                 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1438                 MLX5_SET(qpc, qpc, no_sq, 1);
1439         }
1440         qp_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1441                                                  sizeof(out));
1442         if (!qp_obj->obj) {
1443                 rte_errno = errno;
1444                 DRV_LOG(ERR, "Failed to create QP Obj using DevX.");
1445                 rte_free(qp_obj);
1446                 return NULL;
1447         }
1448         qp_obj->id = MLX5_GET(create_qp_out, out, qpn);
1449         return qp_obj;
1450 }
1451
1452 /**
1453  * Modify QP using DevX API.
1454  * Currently supports only force loop-back QP.
1455  *
1456  * @param[in] qp
1457  *   Pointer to QP object structure.
1458  * @param [in] qp_st_mod_op
1459  *   The QP state modification operation.
1460  * @param [in] remote_qp_id
1461  *   The remote QP ID for MLX5_CMD_OP_INIT2RTR_QP operation.
1462  *
1463  * @return
1464  *   0 on success, a negative errno value otherwise and rte_errno is set.
1465  */
1466 int
1467 mlx5_devx_cmd_modify_qp_state(struct mlx5_devx_obj *qp, uint32_t qp_st_mod_op,
1468                               uint32_t remote_qp_id)
1469 {
1470         union {
1471                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_in)];
1472                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_in)];
1473                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_in)];
1474         } in;
1475         union {
1476                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_out)];
1477                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_out)];
1478                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_out)];
1479         } out;
1480         void *qpc;
1481         int ret;
1482         unsigned int inlen;
1483         unsigned int outlen;
1484
1485         memset(&in, 0, sizeof(in));
1486         memset(&out, 0, sizeof(out));
1487         MLX5_SET(rst2init_qp_in, &in, opcode, qp_st_mod_op);
1488         switch (qp_st_mod_op) {
1489         case MLX5_CMD_OP_RST2INIT_QP:
1490                 MLX5_SET(rst2init_qp_in, &in, qpn, qp->id);
1491                 qpc = MLX5_ADDR_OF(rst2init_qp_in, &in, qpc);
1492                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1493                 MLX5_SET(qpc, qpc, rre, 1);
1494                 MLX5_SET(qpc, qpc, rwe, 1);
1495                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1496                 inlen = sizeof(in.rst2init);
1497                 outlen = sizeof(out.rst2init);
1498                 break;
1499         case MLX5_CMD_OP_INIT2RTR_QP:
1500                 MLX5_SET(init2rtr_qp_in, &in, qpn, qp->id);
1501                 qpc = MLX5_ADDR_OF(init2rtr_qp_in, &in, qpc);
1502                 MLX5_SET(qpc, qpc, primary_address_path.fl, 1);
1503                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1504                 MLX5_SET(qpc, qpc, mtu, 1);
1505                 MLX5_SET(qpc, qpc, log_msg_max, 30);
1506                 MLX5_SET(qpc, qpc, remote_qpn, remote_qp_id);
1507                 MLX5_SET(qpc, qpc, min_rnr_nak, 0);
1508                 inlen = sizeof(in.init2rtr);
1509                 outlen = sizeof(out.init2rtr);
1510                 break;
1511         case MLX5_CMD_OP_RTR2RTS_QP:
1512                 qpc = MLX5_ADDR_OF(rtr2rts_qp_in, &in, qpc);
1513                 MLX5_SET(rtr2rts_qp_in, &in, qpn, qp->id);
1514                 MLX5_SET(qpc, qpc, primary_address_path.ack_timeout, 14);
1515                 MLX5_SET(qpc, qpc, log_ack_req_freq, 0);
1516                 MLX5_SET(qpc, qpc, retry_count, 7);
1517                 MLX5_SET(qpc, qpc, rnr_retry, 7);
1518                 inlen = sizeof(in.rtr2rts);
1519                 outlen = sizeof(out.rtr2rts);
1520                 break;
1521         default:
1522                 DRV_LOG(ERR, "Invalid or unsupported QP modify op %u.",
1523                         qp_st_mod_op);
1524                 rte_errno = EINVAL;
1525                 return -rte_errno;
1526         }
1527         ret = mlx5_glue->devx_obj_modify(qp->obj, &in, inlen, &out, outlen);
1528         if (ret) {
1529                 DRV_LOG(ERR, "Failed to modify QP using DevX.");
1530                 rte_errno = errno;
1531                 return -errno;
1532         }
1533         return ret;
1534 }