drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2015-2017 Intel Corporation
   3  */
   4
   5 #include <intel-ipsec-mb.h>
   6
   7 #include <rte_common.h>
   8 #include <rte_hexdump.h>
   9 #include <rte_cryptodev.h>
  10 #include <rte_cryptodev_pmd.h>
  11 #include <rte_bus_vdev.h>
  12 #include <rte_malloc.h>
  13 #include <rte_cpuflags.h>
  14
  15 #include "rte_aesni_mb_pmd_private.h"
  16
  17 #define AES_CCM_DIGEST_MIN_LEN 4
  18 #define AES_CCM_DIGEST_MAX_LEN 16
  19 #define HMAC_MAX_BLOCK_SIZE 128
  20 static uint8_t cryptodev_driver_id;
  21
  22 typedef void (*hash_one_block_t)(const void *data, void *digest);
  23 typedef void (*aes_keyexp_t)(const void *key, void *enc_exp_keys, void *dec_exp_keys);
  24
  25 /**
  26  * Calculate the authentication pre-computes
  27  *
  28  * @param one_block_hash        Function pointer to calculate digest on ipad/opad
  29  * @param ipad                  Inner pad output byte array
  30  * @param opad                  Outer pad output byte array
  31  * @param hkey                  Authentication key
  32  * @param hkey_len              Authentication key length
  33  * @param blocksize             Block size of selected hash algo
  34  */
  35 static void
  36 calculate_auth_precomputes(hash_one_block_t one_block_hash,
  37                 uint8_t *ipad, uint8_t *opad,
  38                 uint8_t *hkey, uint16_t hkey_len,
  39                 uint16_t blocksize)
  40 {
  41         unsigned i, length;
  42
  43         uint8_t ipad_buf[blocksize] __rte_aligned(16);
  44         uint8_t opad_buf[blocksize] __rte_aligned(16);
  45
  46         /* Setup inner and outer pads */
  47         memset(ipad_buf, HMAC_IPAD_VALUE, blocksize);
  48         memset(opad_buf, HMAC_OPAD_VALUE, blocksize);
  49
  50         /* XOR hash key with inner and outer pads */
  51         length = hkey_len > blocksize ? blocksize : hkey_len;
  52
  53         for (i = 0; i < length; i++) {
  54                 ipad_buf[i] ^= hkey[i];
  55                 opad_buf[i] ^= hkey[i];
  56         }
  57
  58         /* Compute partial hashes */
  59         (*one_block_hash)(ipad_buf, ipad);
  60         (*one_block_hash)(opad_buf, opad);
  61
  62         /* Clean up stack */
  63         memset(ipad_buf, 0, blocksize);
  64         memset(opad_buf, 0, blocksize);
  65 }
  66
  67 /** Get xform chain order */
  68 static enum aesni_mb_operation
  69 aesni_mb_get_chain_order(const struct rte_crypto_sym_xform *xform)
  70 {
  71         if (xform == NULL)
  72                 return AESNI_MB_OP_NOT_SUPPORTED;
  73
  74         if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
  75                 if (xform->next == NULL)
  76                         return AESNI_MB_OP_CIPHER_ONLY;
  77                 if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
  78                         return AESNI_MB_OP_CIPHER_HASH;
  79         }
  80
  81         if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
  82                 if (xform->next == NULL)
  83                         return AESNI_MB_OP_HASH_ONLY;
  84                 if (xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
  85                         return AESNI_MB_OP_HASH_CIPHER;
  86         }
  87
  88         if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD) {
  89                 if (xform->aead.algo == RTE_CRYPTO_AEAD_AES_CCM ||
  90                                 xform->aead.algo == RTE_CRYPTO_AEAD_AES_GCM) {
  91                         if (xform->aead.op == RTE_CRYPTO_AEAD_OP_ENCRYPT)
  92                                 return AESNI_MB_OP_AEAD_CIPHER_HASH;
  93                         else
  94                                 return AESNI_MB_OP_AEAD_HASH_CIPHER;
  95                 }
  96         }
  97
  98         return AESNI_MB_OP_NOT_SUPPORTED;
  99 }
 100
 101 /** Set session authentication parameters */
 102 static int
 103 aesni_mb_set_session_auth_parameters(const MB_MGR *mb_mgr,
 104                 struct aesni_mb_session *sess,
 105                 const struct rte_crypto_sym_xform *xform)
 106 {
 107         hash_one_block_t hash_oneblock_fn;
 108         unsigned int key_larger_block_size = 0;
 109         uint8_t hashed_key[HMAC_MAX_BLOCK_SIZE] = { 0 };
 110         uint32_t auth_precompute = 1;
 111
 112         if (xform == NULL) {
 113                 sess->auth.algo = NULL_HASH;
 114                 return 0;
 115         }
 116
 117         if (xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
 118                 AESNI_MB_LOG(ERR, "Crypto xform struct not of type auth");
 119                 return -1;
 120         }
 121
 122         /* Set the request digest size */
 123         sess->auth.req_digest_len = xform->auth.digest_length;
 124
 125         /* Select auth generate/verify */
 126         sess->auth.operation = xform->auth.op;
 127
 128         /* Set Authentication Parameters */
 129         if (xform->auth.algo == RTE_CRYPTO_AUTH_AES_XCBC_MAC) {
 130                 sess->auth.algo = AES_XCBC;
 131
 132                 uint16_t xcbc_mac_digest_len =
 133                         get_truncated_digest_byte_length(AES_XCBC);
 134                 if (sess->auth.req_digest_len != xcbc_mac_digest_len) {
 135                         AESNI_MB_LOG(ERR, "Invalid digest size\n");
 136                         return -EINVAL;
 137                 }
 138                 sess->auth.gen_digest_len = sess->auth.req_digest_len;
 139
 140                 IMB_AES_XCBC_KEYEXP(mb_mgr, xform->auth.key.data,
 141                                 sess->auth.xcbc.k1_expanded,
 142                                 sess->auth.xcbc.k2, sess->auth.xcbc.k3);
 143                 return 0;
 144         }
 145
 146         if (xform->auth.algo == RTE_CRYPTO_AUTH_AES_CMAC) {
 147                 uint32_t dust[4*15];
 148
 149                 sess->auth.algo = AES_CMAC;
 150
 151                 uint16_t cmac_digest_len = get_digest_byte_length(AES_CMAC);
 152
 153                 if (sess->auth.req_digest_len > cmac_digest_len) {
 154                         AESNI_MB_LOG(ERR, "Invalid digest size\n");
 155                         return -EINVAL;
 156                 }
 157                 /*
 158                  * Multi-buffer lib supports digest sizes from 4 to 16 bytes
 159                  * in version 0.50 and sizes of 12 and 16 bytes,
 160                  * in version 0.49.
 161                  * If size requested is different, generate the full digest
 162                  * (16 bytes) in a temporary location and then memcpy
 163                  * the requested number of bytes.
 164                  */
 165                 if (sess->auth.req_digest_len < 4)
 166                         sess->auth.gen_digest_len = cmac_digest_len;
 167                 else
 168                         sess->auth.gen_digest_len = sess->auth.req_digest_len;
 169
 170                 IMB_AES_KEYEXP_128(mb_mgr, xform->auth.key.data,
 171                                 sess->auth.cmac.expkey, dust);
 172                 IMB_AES_CMAC_SUBKEY_GEN_128(mb_mgr, sess->auth.cmac.expkey,
 173                                 sess->auth.cmac.skey1, sess->auth.cmac.skey2);
 174                 return 0;
 175         }
 176
 177         if (xform->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC) {
 178                 if (xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) {
 179                         sess->cipher.direction = ENCRYPT;
 180                         sess->chain_order = CIPHER_HASH;
 181                 } else
 182                         sess->cipher.direction = DECRYPT;
 183
 184                 sess->auth.algo = AES_GMAC;
 185                 /*
 186                  * Multi-buffer lib supports 8, 12 and 16 bytes of digest.
 187                  * If size requested is different, generate the full digest
 188                  * (16 bytes) in a temporary location and then memcpy
 189                  * the requested number of bytes.
 190                  */
 191                 if (sess->auth.req_digest_len != 16 &&
 192                                 sess->auth.req_digest_len != 12 &&
 193                                 sess->auth.req_digest_len != 8) {
 194                         sess->auth.gen_digest_len = 16;
 195                 } else {
 196                         sess->auth.gen_digest_len = sess->auth.req_digest_len;
 197                 }
 198                 sess->iv.length = xform->auth.iv.length;
 199                 sess->iv.offset = xform->auth.iv.offset;
 200
 201                 switch (xform->auth.key.length) {
 202                 case AES_128_BYTES:
 203                         IMB_AES128_GCM_PRE(mb_mgr, xform->auth.key.data,
 204                                 &sess->cipher.gcm_key);
 205                         sess->cipher.key_length_in_bytes = AES_128_BYTES;
 206                         break;
 207                 case AES_192_BYTES:
 208                         IMB_AES192_GCM_PRE(mb_mgr, xform->auth.key.data,
 209                                 &sess->cipher.gcm_key);
 210                         sess->cipher.key_length_in_bytes = AES_192_BYTES;
 211                         break;
 212                 case AES_256_BYTES:
 213                         IMB_AES256_GCM_PRE(mb_mgr, xform->auth.key.data,
 214                                 &sess->cipher.gcm_key);
 215                         sess->cipher.key_length_in_bytes = AES_256_BYTES;
 216                         break;
 217                 default:
 218                         RTE_LOG(ERR, PMD, "failed to parse test type\n");
 219                         return -EINVAL;
 220                 }
 221
 222                 return 0;
 223         }
 224
 225         switch (xform->auth.algo) {
 226         case RTE_CRYPTO_AUTH_MD5_HMAC:
 227                 sess->auth.algo = MD5;
 228                 hash_oneblock_fn = mb_mgr->md5_one_block;
 229                 break;
 230         case RTE_CRYPTO_AUTH_SHA1_HMAC:
 231                 sess->auth.algo = SHA1;
 232                 hash_oneblock_fn = mb_mgr->sha1_one_block;
 233                 if (xform->auth.key.length > get_auth_algo_blocksize(SHA1)) {
 234                         IMB_SHA1(mb_mgr,
 235                                 xform->auth.key.data,
 236                                 xform->auth.key.length,
 237                                 hashed_key);
 238                         key_larger_block_size = 1;
 239                 }
 240                 break;
 241         case RTE_CRYPTO_AUTH_SHA1:
 242                 sess->auth.algo = PLAIN_SHA1;
 243                 auth_precompute = 0;
 244                 break;
 245         case RTE_CRYPTO_AUTH_SHA224_HMAC:
 246                 sess->auth.algo = SHA_224;
 247                 hash_oneblock_fn = mb_mgr->sha224_one_block;
 248                 if (xform->auth.key.length > get_auth_algo_blocksize(SHA_224)) {
 249                         IMB_SHA224(mb_mgr,
 250                                 xform->auth.key.data,
 251                                 xform->auth.key.length,
 252                                 hashed_key);
 253                         key_larger_block_size = 1;
 254                 }
 255                 break;
 256         case RTE_CRYPTO_AUTH_SHA224:
 257                 sess->auth.algo = PLAIN_SHA_224;
 258                 auth_precompute = 0;
 259                 break;
 260         case RTE_CRYPTO_AUTH_SHA256_HMAC:
 261                 sess->auth.algo = SHA_256;
 262                 hash_oneblock_fn = mb_mgr->sha256_one_block;
 263                 if (xform->auth.key.length > get_auth_algo_blocksize(SHA_256)) {
 264                         IMB_SHA256(mb_mgr,
 265                                 xform->auth.key.data,
 266                                 xform->auth.key.length,
 267                                 hashed_key);
 268                         key_larger_block_size = 1;
 269                 }
 270                 break;
 271         case RTE_CRYPTO_AUTH_SHA256:
 272                 sess->auth.algo = PLAIN_SHA_256;
 273                 auth_precompute = 0;
 274                 break;
 275         case RTE_CRYPTO_AUTH_SHA384_HMAC:
 276                 sess->auth.algo = SHA_384;
 277                 hash_oneblock_fn = mb_mgr->sha384_one_block;
 278                 if (xform->auth.key.length > get_auth_algo_blocksize(SHA_384)) {
 279                         IMB_SHA384(mb_mgr,
 280                                 xform->auth.key.data,
 281                                 xform->auth.key.length,
 282                                 hashed_key);
 283                         key_larger_block_size = 1;
 284                 }
 285                 break;
 286         case RTE_CRYPTO_AUTH_SHA384:
 287                 sess->auth.algo = PLAIN_SHA_384;
 288                 auth_precompute = 0;
 289                 break;
 290         case RTE_CRYPTO_AUTH_SHA512_HMAC:
 291                 sess->auth.algo = SHA_512;
 292                 hash_oneblock_fn = mb_mgr->sha512_one_block;
 293                 if (xform->auth.key.length > get_auth_algo_blocksize(SHA_512)) {
 294                         IMB_SHA512(mb_mgr,
 295                                 xform->auth.key.data,
 296                                 xform->auth.key.length,
 297                                 hashed_key);
 298                         key_larger_block_size = 1;
 299                 }
 300                 break;
 301         case RTE_CRYPTO_AUTH_SHA512:
 302                 sess->auth.algo = PLAIN_SHA_512;
 303                 auth_precompute = 0;
 304                 break;
 305         default:
 306                 AESNI_MB_LOG(ERR, "Unsupported authentication algorithm selection");
 307                 return -ENOTSUP;
 308         }
 309         uint16_t trunc_digest_size =
 310                         get_truncated_digest_byte_length(sess->auth.algo);
 311         uint16_t full_digest_size =
 312                         get_digest_byte_length(sess->auth.algo);
 313
 314         if (sess->auth.req_digest_len > full_digest_size ||
 315                         sess->auth.req_digest_len == 0) {
 316                 AESNI_MB_LOG(ERR, "Invalid digest size\n");
 317                 return -EINVAL;
 318         }
 319
 320         if (sess->auth.req_digest_len != trunc_digest_size &&
 321                         sess->auth.req_digest_len != full_digest_size)
 322                 sess->auth.gen_digest_len = full_digest_size;
 323         else
 324                 sess->auth.gen_digest_len = sess->auth.req_digest_len;
 325
 326         /* Plain SHA does not require precompute key */
 327         if (auth_precompute == 0)
 328                 return 0;
 329
 330         /* Calculate Authentication precomputes */
 331         if (key_larger_block_size) {
 332                 calculate_auth_precomputes(hash_oneblock_fn,
 333                         sess->auth.pads.inner, sess->auth.pads.outer,
 334                         hashed_key,
 335                         xform->auth.key.length,
 336                         get_auth_algo_blocksize(sess->auth.algo));
 337         } else {
 338                 calculate_auth_precomputes(hash_oneblock_fn,
 339                         sess->auth.pads.inner, sess->auth.pads.outer,
 340                         xform->auth.key.data,
 341                         xform->auth.key.length,
 342                         get_auth_algo_blocksize(sess->auth.algo));
 343         }
 344
 345         return 0;
 346 }
 347
 348 /** Set session cipher parameters */
 349 static int
 350 aesni_mb_set_session_cipher_parameters(const MB_MGR *mb_mgr,
 351                 struct aesni_mb_session *sess,
 352                 const struct rte_crypto_sym_xform *xform)
 353 {
 354         uint8_t is_aes = 0;
 355         uint8_t is_3DES = 0;
 356
 357         if (xform == NULL) {
 358                 sess->cipher.mode = NULL_CIPHER;
 359                 return 0;
 360         }
 361
 362         if (xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
 363                 AESNI_MB_LOG(ERR, "Crypto xform struct not of type cipher");
 364                 return -EINVAL;
 365         }
 366
 367         /* Select cipher direction */
 368         switch (xform->cipher.op) {
 369         case RTE_CRYPTO_CIPHER_OP_ENCRYPT:
 370                 sess->cipher.direction = ENCRYPT;
 371                 break;
 372         case RTE_CRYPTO_CIPHER_OP_DECRYPT:
 373                 sess->cipher.direction = DECRYPT;
 374                 break;
 375         default:
 376                 AESNI_MB_LOG(ERR, "Invalid cipher operation parameter");
 377                 return -EINVAL;
 378         }
 379
 380         /* Select cipher mode */
 381         switch (xform->cipher.algo) {
 382         case RTE_CRYPTO_CIPHER_AES_CBC:
 383                 sess->cipher.mode = CBC;
 384                 is_aes = 1;
 385                 break;
 386         case RTE_CRYPTO_CIPHER_AES_CTR:
 387                 sess->cipher.mode = CNTR;
 388                 is_aes = 1;
 389                 break;
 390         case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
 391                 sess->cipher.mode = DOCSIS_SEC_BPI;
 392                 is_aes = 1;
 393                 break;
 394         case RTE_CRYPTO_CIPHER_DES_CBC:
 395                 sess->cipher.mode = DES;
 396                 break;
 397         case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
 398                 sess->cipher.mode = DOCSIS_DES;
 399                 break;
 400         case RTE_CRYPTO_CIPHER_3DES_CBC:
 401                 sess->cipher.mode = DES3;
 402                 is_3DES = 1;
 403                 break;
 404         default:
 405                 AESNI_MB_LOG(ERR, "Unsupported cipher mode parameter");
 406                 return -ENOTSUP;
 407         }
 408
 409         /* Set IV parameters */
 410         sess->iv.offset = xform->cipher.iv.offset;
 411         sess->iv.length = xform->cipher.iv.length;
 412
 413         /* Check key length and choose key expansion function for AES */
 414         if (is_aes) {
 415                 switch (xform->cipher.key.length) {
 416                 case AES_128_BYTES:
 417                         sess->cipher.key_length_in_bytes = AES_128_BYTES;
 418                         IMB_AES_KEYEXP_128(mb_mgr, xform->cipher.key.data,
 419                                         sess->cipher.expanded_aes_keys.encode,
 420                                         sess->cipher.expanded_aes_keys.decode);
 421                         break;
 422                 case AES_192_BYTES:
 423                         sess->cipher.key_length_in_bytes = AES_192_BYTES;
 424                         IMB_AES_KEYEXP_192(mb_mgr, xform->cipher.key.data,
 425                                         sess->cipher.expanded_aes_keys.encode,
 426                                         sess->cipher.expanded_aes_keys.decode);
 427                         break;
 428                 case AES_256_BYTES:
 429                         sess->cipher.key_length_in_bytes = AES_256_BYTES;
 430                         IMB_AES_KEYEXP_256(mb_mgr, xform->cipher.key.data,
 431                                         sess->cipher.expanded_aes_keys.encode,
 432                                         sess->cipher.expanded_aes_keys.decode);
 433                         break;
 434                 default:
 435                         AESNI_MB_LOG(ERR, "Invalid cipher key length");
 436                         return -EINVAL;
 437                 }
 438         } else if (is_3DES) {
 439                 uint64_t *keys[3] = {sess->cipher.exp_3des_keys.key[0],
 440                                 sess->cipher.exp_3des_keys.key[1],
 441                                 sess->cipher.exp_3des_keys.key[2]};
 442
 443                 switch (xform->cipher.key.length) {
 444                 case  24:
 445                         IMB_DES_KEYSCHED(mb_mgr, keys[0],
 446                                         xform->cipher.key.data);
 447                         IMB_DES_KEYSCHED(mb_mgr, keys[1],
 448                                         xform->cipher.key.data + 8);
 449                         IMB_DES_KEYSCHED(mb_mgr, keys[2],
 450                                         xform->cipher.key.data + 16);
 451
 452                         /* Initialize keys - 24 bytes: [K1-K2-K3] */
 453                         sess->cipher.exp_3des_keys.ks_ptr[0] = keys[0];
 454                         sess->cipher.exp_3des_keys.ks_ptr[1] = keys[1];
 455                         sess->cipher.exp_3des_keys.ks_ptr[2] = keys[2];
 456                         break;
 457                 case 16:
 458                         IMB_DES_KEYSCHED(mb_mgr, keys[0],
 459                                         xform->cipher.key.data);
 460                         IMB_DES_KEYSCHED(mb_mgr, keys[1],
 461                                         xform->cipher.key.data + 8);
 462                         /* Initialize keys - 16 bytes: [K1=K1,K2=K2,K3=K1] */
 463                         sess->cipher.exp_3des_keys.ks_ptr[0] = keys[0];
 464                         sess->cipher.exp_3des_keys.ks_ptr[1] = keys[1];
 465                         sess->cipher.exp_3des_keys.ks_ptr[2] = keys[0];
 466                         break;
 467                 case 8:
 468                         IMB_DES_KEYSCHED(mb_mgr, keys[0],
 469                                         xform->cipher.key.data);
 470
 471                         /* Initialize keys - 8 bytes: [K1 = K2 = K3] */
 472                         sess->cipher.exp_3des_keys.ks_ptr[0] = keys[0];
 473                         sess->cipher.exp_3des_keys.ks_ptr[1] = keys[0];
 474                         sess->cipher.exp_3des_keys.ks_ptr[2] = keys[0];
 475                         break;
 476                 default:
 477                         AESNI_MB_LOG(ERR, "Invalid cipher key length");
 478                         return -EINVAL;
 479                 }
 480
 481                 sess->cipher.key_length_in_bytes = 24;
 482         } else {
 483                 if (xform->cipher.key.length != 8) {
 484                         AESNI_MB_LOG(ERR, "Invalid cipher key length");
 485                         return -EINVAL;
 486                 }
 487                 sess->cipher.key_length_in_bytes = 8;
 488
 489                 IMB_DES_KEYSCHED(mb_mgr,
 490                         (uint64_t *)sess->cipher.expanded_aes_keys.encode,
 491                                 xform->cipher.key.data);
 492                 IMB_DES_KEYSCHED(mb_mgr,
 493                         (uint64_t *)sess->cipher.expanded_aes_keys.decode,
 494                                 xform->cipher.key.data);
 495         }
 496
 497         return 0;
 498 }
 499
 500 static int
 501 aesni_mb_set_session_aead_parameters(const MB_MGR *mb_mgr,
 502                 struct aesni_mb_session *sess,
 503                 const struct rte_crypto_sym_xform *xform)
 504 {
 505         switch (xform->aead.op) {
 506         case RTE_CRYPTO_AEAD_OP_ENCRYPT:
 507                 sess->cipher.direction = ENCRYPT;
 508                 sess->auth.operation = RTE_CRYPTO_AUTH_OP_GENERATE;
 509                 break;
 510         case RTE_CRYPTO_AEAD_OP_DECRYPT:
 511                 sess->cipher.direction = DECRYPT;
 512                 sess->auth.operation = RTE_CRYPTO_AUTH_OP_VERIFY;
 513                 break;
 514         default:
 515                 AESNI_MB_LOG(ERR, "Invalid aead operation parameter");
 516                 return -EINVAL;
 517         }
 518
 519         switch (xform->aead.algo) {
 520         case RTE_CRYPTO_AEAD_AES_CCM:
 521                 sess->cipher.mode = CCM;
 522                 sess->auth.algo = AES_CCM;
 523
 524                 /* Check key length and choose key expansion function for AES */
 525                 switch (xform->aead.key.length) {
 526                 case AES_128_BYTES:
 527                         sess->cipher.key_length_in_bytes = AES_128_BYTES;
 528                         IMB_AES_KEYEXP_128(mb_mgr, xform->aead.key.data,
 529                                         sess->cipher.expanded_aes_keys.encode,
 530                                         sess->cipher.expanded_aes_keys.decode);
 531                         break;
 532                 default:
 533                         AESNI_MB_LOG(ERR, "Invalid cipher key length");
 534                         return -EINVAL;
 535                 }
 536
 537                 break;
 538
 539         case RTE_CRYPTO_AEAD_AES_GCM:
 540                 sess->cipher.mode = GCM;
 541                 sess->auth.algo = AES_GMAC;
 542
 543                 switch (xform->aead.key.length) {
 544                 case AES_128_BYTES:
 545                         sess->cipher.key_length_in_bytes = AES_128_BYTES;
 546                         IMB_AES128_GCM_PRE(mb_mgr, xform->aead.key.data,
 547                                 &sess->cipher.gcm_key);
 548                         break;
 549                 case AES_192_BYTES:
 550                         sess->cipher.key_length_in_bytes = AES_192_BYTES;
 551                         IMB_AES192_GCM_PRE(mb_mgr, xform->aead.key.data,
 552                                 &sess->cipher.gcm_key);
 553                         break;
 554                 case AES_256_BYTES:
 555                         sess->cipher.key_length_in_bytes = AES_256_BYTES;
 556                         IMB_AES256_GCM_PRE(mb_mgr, xform->aead.key.data,
 557                                 &sess->cipher.gcm_key);
 558                         break;
 559                 default:
 560                         AESNI_MB_LOG(ERR, "Invalid cipher key length");
 561                         return -EINVAL;
 562                 }
 563
 564                 break;
 565
 566         default:
 567                 AESNI_MB_LOG(ERR, "Unsupported aead mode parameter");
 568                 return -ENOTSUP;
 569         }
 570
 571         /* Set IV parameters */
 572         sess->iv.offset = xform->aead.iv.offset;
 573         sess->iv.length = xform->aead.iv.length;
 574
 575         sess->auth.req_digest_len = xform->aead.digest_length;
 576         /* CCM digests must be between 4 and 16 and an even number */
 577         if (sess->auth.req_digest_len < AES_CCM_DIGEST_MIN_LEN ||
 578                         sess->auth.req_digest_len > AES_CCM_DIGEST_MAX_LEN ||
 579                         (sess->auth.req_digest_len & 1) == 1) {
 580                 AESNI_MB_LOG(ERR, "Invalid digest size\n");
 581                 return -EINVAL;
 582         }
 583         sess->auth.gen_digest_len = sess->auth.req_digest_len;
 584
 585         return 0;
 586 }
 587
 588 /** Parse crypto xform chain and set private session parameters */
 589 int
 590 aesni_mb_set_session_parameters(const MB_MGR *mb_mgr,
 591                 struct aesni_mb_session *sess,
 592                 const struct rte_crypto_sym_xform *xform)
 593 {
 594         const struct rte_crypto_sym_xform *auth_xform = NULL;
 595         const struct rte_crypto_sym_xform *cipher_xform = NULL;
 596         const struct rte_crypto_sym_xform *aead_xform = NULL;
 597         int ret;
 598
 599         /* Select Crypto operation - hash then cipher / cipher then hash */
 600         switch (aesni_mb_get_chain_order(xform)) {
 601         case AESNI_MB_OP_HASH_CIPHER:
 602                 sess->chain_order = HASH_CIPHER;
 603                 auth_xform = xform;
 604                 cipher_xform = xform->next;
 605                 break;
 606         case AESNI_MB_OP_CIPHER_HASH:
 607                 sess->chain_order = CIPHER_HASH;
 608                 auth_xform = xform->next;
 609                 cipher_xform = xform;
 610                 break;
 611         case AESNI_MB_OP_HASH_ONLY:
 612                 sess->chain_order = HASH_CIPHER;
 613                 auth_xform = xform;
 614                 cipher_xform = NULL;
 615                 break;
 616         case AESNI_MB_OP_CIPHER_ONLY:
 617                 /*
 618                  * Multi buffer library operates only at two modes,
 619                  * CIPHER_HASH and HASH_CIPHER. When doing ciphering only,
 620                  * chain order depends on cipher operation: encryption is always
 621                  * the first operation and decryption the last one.
 622                  */
 623                 if (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
 624                         sess->chain_order = CIPHER_HASH;
 625                 else
 626                         sess->chain_order = HASH_CIPHER;
 627                 auth_xform = NULL;
 628                 cipher_xform = xform;
 629                 break;
 630         case AESNI_MB_OP_AEAD_CIPHER_HASH:
 631                 sess->chain_order = CIPHER_HASH;
 632                 sess->aead.aad_len = xform->aead.aad_length;
 633                 aead_xform = xform;
 634                 break;
 635         case AESNI_MB_OP_AEAD_HASH_CIPHER:
 636                 sess->chain_order = HASH_CIPHER;
 637                 sess->aead.aad_len = xform->aead.aad_length;
 638                 aead_xform = xform;
 639                 break;
 640         case AESNI_MB_OP_NOT_SUPPORTED:
 641         default:
 642                 AESNI_MB_LOG(ERR, "Unsupported operation chain order parameter");
 643                 return -ENOTSUP;
 644         }
 645
 646         /* Default IV length = 0 */
 647         sess->iv.length = 0;
 648
 649         ret = aesni_mb_set_session_auth_parameters(mb_mgr, sess, auth_xform);
 650         if (ret != 0) {
 651                 AESNI_MB_LOG(ERR, "Invalid/unsupported authentication parameters");
 652                 return ret;
 653         }
 654
 655         ret = aesni_mb_set_session_cipher_parameters(mb_mgr, sess,
 656                         cipher_xform);
 657         if (ret != 0) {
 658                 AESNI_MB_LOG(ERR, "Invalid/unsupported cipher parameters");
 659                 return ret;
 660         }
 661
 662         if (aead_xform) {
 663                 ret = aesni_mb_set_session_aead_parameters(mb_mgr, sess,
 664                                 aead_xform);
 665                 if (ret != 0) {
 666                         AESNI_MB_LOG(ERR, "Invalid/unsupported aead parameters");
 667                         return ret;
 668                 }
 669         }
 670
 671         return 0;
 672 }
 673
 674 /**
 675  * burst enqueue, place crypto operations on ingress queue for processing.
 676  *
 677  * @param __qp         Queue Pair to process
 678  * @param ops          Crypto operations for processing
 679  * @param nb_ops       Number of crypto operations for processing
 680  *
 681  * @return
 682  * - Number of crypto operations enqueued
 683  */
 684 static uint16_t
 685 aesni_mb_pmd_enqueue_burst(void *__qp, struct rte_crypto_op **ops,
 686                 uint16_t nb_ops)
 687 {
 688         struct aesni_mb_qp *qp = __qp;
 689
 690         unsigned int nb_enqueued;
 691
 692         nb_enqueued = rte_ring_enqueue_burst(qp->ingress_queue,
 693                         (void **)ops, nb_ops, NULL);
 694
 695         qp->stats.enqueued_count += nb_enqueued;
 696
 697         return nb_enqueued;
 698 }
 699
 700 /** Get multi buffer session */
 701 static inline struct aesni_mb_session *
 702 get_session(struct aesni_mb_qp *qp, struct rte_crypto_op *op)
 703 {
 704         struct aesni_mb_session *sess = NULL;
 705
 706         if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) {
 707                 if (likely(op->sym->session != NULL))
 708                         sess = (struct aesni_mb_session *)
 709                                         get_sym_session_private_data(
 710                                         op->sym->session,
 711                                         cryptodev_driver_id);
 712         } else {
 713                 void *_sess = NULL;
 714                 void *_sess_private_data = NULL;
 715
 716                 if (rte_mempool_get(qp->sess_mp, (void **)&_sess))
 717                         return NULL;
 718
 719                 if (rte_mempool_get(qp->sess_mp_priv,
 720                                 (void **)&_sess_private_data))
 721                         return NULL;
 722
 723                 sess = (struct aesni_mb_session *)_sess_private_data;
 724
 725                 if (unlikely(aesni_mb_set_session_parameters(qp->mb_mgr,
 726                                 sess, op->sym->xform) != 0)) {
 727                         rte_mempool_put(qp->sess_mp, _sess);
 728                         rte_mempool_put(qp->sess_mp_priv, _sess_private_data);
 729                         sess = NULL;
 730                 }
 731                 op->sym->session = (struct rte_cryptodev_sym_session *)_sess;
 732                 set_sym_session_private_data(op->sym->session,
 733                                 cryptodev_driver_id, _sess_private_data);
 734         }
 735
 736         if (unlikely(sess == NULL))
 737                 op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
 738
 739         return sess;
 740 }
 741
 742 /**
 743  * Process a crypto operation and complete a JOB_AES_HMAC job structure for
 744  * submission to the multi buffer library for processing.
 745  *
 746  * @param       qp      queue pair
 747  * @param       job     JOB_AES_HMAC structure to fill
 748  * @param       m       mbuf to process
 749  *
 750  * @return
 751  * - Completed JOB_AES_HMAC structure pointer on success
 752  * - NULL pointer if completion of JOB_AES_HMAC structure isn't possible
 753  */
 754 static inline int
 755 set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
 756                 struct rte_crypto_op *op, uint8_t *digest_idx)
 757 {
 758         struct rte_mbuf *m_src = op->sym->m_src, *m_dst;
 759         struct aesni_mb_session *session;
 760         uint16_t m_offset = 0;
 761
 762         session = get_session(qp, op);
 763         if (session == NULL) {
 764                 op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
 765                 return -1;
 766         }
 767
 768         /* Set crypto operation */
 769         job->chain_order = session->chain_order;
 770
 771         /* Set cipher parameters */
 772         job->cipher_direction = session->cipher.direction;
 773         job->cipher_mode = session->cipher.mode;
 774
 775         job->aes_key_len_in_bytes = session->cipher.key_length_in_bytes;
 776
 777         /* Set authentication parameters */
 778         job->hash_alg = session->auth.algo;
 779
 780         switch (job->hash_alg) {
 781         case AES_XCBC:
 782                 job->u.XCBC._k1_expanded = session->auth.xcbc.k1_expanded;
 783                 job->u.XCBC._k2 = session->auth.xcbc.k2;
 784                 job->u.XCBC._k3 = session->auth.xcbc.k3;
 785
 786                 job->aes_enc_key_expanded =
 787                                 session->cipher.expanded_aes_keys.encode;
 788                 job->aes_dec_key_expanded =
 789                                 session->cipher.expanded_aes_keys.decode;
 790                 break;
 791
 792         case AES_CCM:
 793                 job->u.CCM.aad = op->sym->aead.aad.data + 18;
 794                 job->u.CCM.aad_len_in_bytes = session->aead.aad_len;
 795                 job->aes_enc_key_expanded =
 796                                 session->cipher.expanded_aes_keys.encode;
 797                 job->aes_dec_key_expanded =
 798                                 session->cipher.expanded_aes_keys.decode;
 799                 break;
 800
 801         case AES_CMAC:
 802                 job->u.CMAC._key_expanded = session->auth.cmac.expkey;
 803                 job->u.CMAC._skey1 = session->auth.cmac.skey1;
 804                 job->u.CMAC._skey2 = session->auth.cmac.skey2;
 805                 job->aes_enc_key_expanded =
 806                                 session->cipher.expanded_aes_keys.encode;
 807                 job->aes_dec_key_expanded =
 808                                 session->cipher.expanded_aes_keys.decode;
 809                 break;
 810
 811         case AES_GMAC:
 812                 if (session->cipher.mode == GCM) {
 813                         job->u.GCM.aad = op->sym->aead.aad.data;
 814                         job->u.GCM.aad_len_in_bytes = session->aead.aad_len;
 815                 } else {
 816                         /* For GMAC */
 817                         job->u.GCM.aad = rte_pktmbuf_mtod_offset(m_src,
 818                                         uint8_t *, op->sym->auth.data.offset);
 819                         job->u.GCM.aad_len_in_bytes = op->sym->auth.data.length;
 820                         job->cipher_mode = GCM;
 821                 }
 822                 job->aes_enc_key_expanded = &session->cipher.gcm_key;
 823                 job->aes_dec_key_expanded = &session->cipher.gcm_key;
 824                 break;
 825
 826         default:
 827                 job->u.HMAC._hashed_auth_key_xor_ipad = session->auth.pads.inner;
 828                 job->u.HMAC._hashed_auth_key_xor_opad = session->auth.pads.outer;
 829
 830                 if (job->cipher_mode == DES3) {
 831                         job->aes_enc_key_expanded =
 832                                 session->cipher.exp_3des_keys.ks_ptr;
 833                         job->aes_dec_key_expanded =
 834                                 session->cipher.exp_3des_keys.ks_ptr;
 835                 } else {
 836                         job->aes_enc_key_expanded =
 837                                 session->cipher.expanded_aes_keys.encode;
 838                         job->aes_dec_key_expanded =
 839                                 session->cipher.expanded_aes_keys.decode;
 840                 }
 841         }
 842
 843         /* Mutable crypto operation parameters */
 844         if (op->sym->m_dst) {
 845                 m_src = m_dst = op->sym->m_dst;
 846
 847                 /* append space for output data to mbuf */
 848                 char *odata = rte_pktmbuf_append(m_dst,
 849                                 rte_pktmbuf_data_len(op->sym->m_src));
 850                 if (odata == NULL) {
 851                         AESNI_MB_LOG(ERR, "failed to allocate space in destination "
 852                                         "mbuf for source data");
 853                         op->status = RTE_CRYPTO_OP_STATUS_ERROR;
 854                         return -1;
 855                 }
 856
 857                 memcpy(odata, rte_pktmbuf_mtod(op->sym->m_src, void*),
 858                                 rte_pktmbuf_data_len(op->sym->m_src));
 859         } else {
 860                 m_dst = m_src;
 861                 if (job->hash_alg == AES_CCM || (job->hash_alg == AES_GMAC &&
 862                                 session->cipher.mode == GCM))
 863                         m_offset = op->sym->aead.data.offset;
 864                 else
 865                         m_offset = op->sym->cipher.data.offset;
 866         }
 867
 868         /* Set digest output location */
 869         if (job->hash_alg != NULL_HASH &&
 870                         session->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
 871                 job->auth_tag_output = qp->temp_digests[*digest_idx];
 872                 *digest_idx = (*digest_idx + 1) % MAX_JOBS;
 873         } else {
 874                 if (job->hash_alg == AES_CCM || (job->hash_alg == AES_GMAC &&
 875                                 session->cipher.mode == GCM))
 876                         job->auth_tag_output = op->sym->aead.digest.data;
 877                 else
 878                         job->auth_tag_output = op->sym->auth.digest.data;
 879
 880                 if (session->auth.req_digest_len != session->auth.gen_digest_len) {
 881                         job->auth_tag_output = qp->temp_digests[*digest_idx];
 882                         *digest_idx = (*digest_idx + 1) % MAX_JOBS;
 883                 }
 884         }
 885         /*
 886          * Multi-buffer library current only support returning a truncated
 887          * digest length as specified in the relevant IPsec RFCs
 888          */
 889
 890         /* Set digest length */
 891         job->auth_tag_output_len_in_bytes = session->auth.gen_digest_len;
 892
 893         /* Set IV parameters */
 894         job->iv_len_in_bytes = session->iv.length;
 895
 896         /* Data  Parameter */
 897         job->src = rte_pktmbuf_mtod(m_src, uint8_t *);
 898         job->dst = rte_pktmbuf_mtod_offset(m_dst, uint8_t *, m_offset);
 899
 900         switch (job->hash_alg) {
 901         case AES_CCM:
 902                 job->cipher_start_src_offset_in_bytes =
 903                                 op->sym->aead.data.offset;
 904                 job->msg_len_to_cipher_in_bytes = op->sym->aead.data.length;
 905                 job->hash_start_src_offset_in_bytes = op->sym->aead.data.offset;
 906                 job->msg_len_to_hash_in_bytes = op->sym->aead.data.length;
 907
 908                 job->iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 909                         session->iv.offset + 1);
 910                 break;
 911
 912         case AES_GMAC:
 913                 if (session->cipher.mode == GCM) {
 914                         job->cipher_start_src_offset_in_bytes =
 915                                         op->sym->aead.data.offset;
 916                         job->hash_start_src_offset_in_bytes =
 917                                         op->sym->aead.data.offset;
 918                         job->msg_len_to_cipher_in_bytes =
 919                                         op->sym->aead.data.length;
 920                         job->msg_len_to_hash_in_bytes =
 921                                         op->sym->aead.data.length;
 922                 } else {
 923                         job->cipher_start_src_offset_in_bytes =
 924                                         op->sym->auth.data.offset;
 925                         job->hash_start_src_offset_in_bytes =
 926                                         op->sym->auth.data.offset;
 927                         job->msg_len_to_cipher_in_bytes = 0;
 928                         job->msg_len_to_hash_in_bytes = 0;
 929                 }
 930
 931                 job->iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 932                                 session->iv.offset);
 933                 break;
 934
 935         default:
 936                 job->cipher_start_src_offset_in_bytes =
 937                                 op->sym->cipher.data.offset;
 938                 job->msg_len_to_cipher_in_bytes = op->sym->cipher.data.length;
 939
 940                 job->hash_start_src_offset_in_bytes = op->sym->auth.data.offset;
 941                 job->msg_len_to_hash_in_bytes = op->sym->auth.data.length;
 942
 943                 job->iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 944                         session->iv.offset);
 945         }
 946
 947         /* Set user data to be crypto operation data struct */
 948         job->user_data = op;
 949
 950         return 0;
 951 }
 952
 953 static inline void
 954 verify_digest(JOB_AES_HMAC *job, void *digest, uint16_t len, uint8_t *status)
 955 {
 956         /* Verify digest if required */
 957         if (memcmp(job->auth_tag_output, digest, len) != 0)
 958                 *status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 959 }
 960
 961 static inline void
 962 generate_digest(JOB_AES_HMAC *job, struct rte_crypto_op *op,
 963                 struct aesni_mb_session *sess)
 964 {
 965         /* No extra copy neeed */
 966         if (likely(sess->auth.req_digest_len == sess->auth.gen_digest_len))
 967                 return;
 968
 969         /*
 970          * This can only happen for HMAC, so only digest
 971          * for authentication algos is required
 972          */
 973         memcpy(op->sym->auth.digest.data, job->auth_tag_output,
 974                         sess->auth.req_digest_len);
 975 }
 976
 977 /**
 978  * Process a completed job and return rte_mbuf which job processed
 979  *
 980  * @param qp            Queue Pair to process
 981  * @param job   JOB_AES_HMAC job to process
 982  *
 983  * @return
 984  * - Returns processed crypto operation.
 985  * - Returns NULL on invalid job
 986  */
 987 static inline struct rte_crypto_op *
 988 post_process_mb_job(struct aesni_mb_qp *qp, JOB_AES_HMAC *job)
 989 {
 990         struct rte_crypto_op *op = (struct rte_crypto_op *)job->user_data;
 991         struct aesni_mb_session *sess = get_sym_session_private_data(
 992                                                         op->sym->session,
 993                                                         cryptodev_driver_id);
 994
 995         if (likely(op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)) {
 996                 switch (job->status) {
 997                 case STS_COMPLETED:
 998                         op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 999
1000                         if (job->hash_alg == NULL_HASH)
1001                                 break;
1002
1003                         if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
1004                                 if (job->hash_alg == AES_CCM ||
1005                                         (job->hash_alg == AES_GMAC &&
1006                                                 sess->cipher.mode == GCM))
1007                                         verify_digest(job,
1008                                                 op->sym->aead.digest.data,
1009                                                 sess->auth.req_digest_len,
1010                                                 &op->status);
1011                                 else
1012                                         verify_digest(job,
1013                                                 op->sym->auth.digest.data,
1014                                                 sess->auth.req_digest_len,
1015                                                 &op->status);
1016                         } else
1017                                 generate_digest(job, op, sess);
1018                         break;
1019                 default:
1020                         op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1021                 }
1022         }
1023
1024         /* Free session if a session-less crypto op */
1025         if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
1026                 memset(sess, 0, sizeof(struct aesni_mb_session));
1027                 memset(op->sym->session, 0,
1028                                 rte_cryptodev_sym_get_header_session_size());
1029                 rte_mempool_put(qp->sess_mp_priv, sess);
1030                 rte_mempool_put(qp->sess_mp, op->sym->session);
1031                 op->sym->session = NULL;
1032         }
1033
1034         return op;
1035 }
1036
1037 /**
1038  * Process a completed JOB_AES_HMAC job and keep processing jobs until
1039  * get_completed_job return NULL
1040  *
1041  * @param qp            Queue Pair to process
1042  * @param job           JOB_AES_HMAC job
1043  *
1044  * @return
1045  * - Number of processed jobs
1046  */
1047 static unsigned
1048 handle_completed_jobs(struct aesni_mb_qp *qp, JOB_AES_HMAC *job,
1049                 struct rte_crypto_op **ops, uint16_t nb_ops)
1050 {
1051         struct rte_crypto_op *op = NULL;
1052         unsigned processed_jobs = 0;
1053
1054         while (job != NULL) {
1055                 op = post_process_mb_job(qp, job);
1056
1057                 if (op) {
1058                         ops[processed_jobs++] = op;
1059                         qp->stats.dequeued_count++;
1060                 } else {
1061                         qp->stats.dequeue_err_count++;
1062                         break;
1063                 }
1064                 if (processed_jobs == nb_ops)
1065                         break;
1066
1067                 job = IMB_GET_COMPLETED_JOB(qp->mb_mgr);
1068         }
1069
1070         return processed_jobs;
1071 }
1072
1073 static inline uint16_t
1074 flush_mb_mgr(struct aesni_mb_qp *qp, struct rte_crypto_op **ops,
1075                 uint16_t nb_ops)
1076 {
1077         int processed_ops = 0;
1078
1079         /* Flush the remaining jobs */
1080         JOB_AES_HMAC *job = IMB_FLUSH_JOB(qp->mb_mgr);
1081
1082         if (job)
1083                 processed_ops += handle_completed_jobs(qp, job,
1084                                 &ops[processed_ops], nb_ops - processed_ops);
1085
1086         return processed_ops;
1087 }
1088
1089 static inline JOB_AES_HMAC *
1090 set_job_null_op(JOB_AES_HMAC *job, struct rte_crypto_op *op)
1091 {
1092         job->chain_order = HASH_CIPHER;
1093         job->cipher_mode = NULL_CIPHER;
1094         job->hash_alg = NULL_HASH;
1095         job->cipher_direction = DECRYPT;
1096
1097         /* Set user data to be crypto operation data struct */
1098         job->user_data = op;
1099
1100         return job;
1101 }
1102
1103 static uint16_t
1104 aesni_mb_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
1105                 uint16_t nb_ops)
1106 {
1107         struct aesni_mb_qp *qp = queue_pair;
1108
1109         struct rte_crypto_op *op;
1110         JOB_AES_HMAC *job;
1111
1112         int retval, processed_jobs = 0;
1113
1114         if (unlikely(nb_ops == 0))
1115                 return 0;
1116
1117         uint8_t digest_idx = qp->digest_idx;
1118         do {
1119                 /* Get next free mb job struct from mb manager */
1120                 job = IMB_GET_NEXT_JOB(qp->mb_mgr);
1121                 if (unlikely(job == NULL)) {
1122                         /* if no free mb job structs we need to flush mb_mgr */
1123                         processed_jobs += flush_mb_mgr(qp,
1124                                         &ops[processed_jobs],
1125                                         nb_ops - processed_jobs);
1126
1127                         if (nb_ops == processed_jobs)
1128                                 break;
1129
1130                         job = IMB_GET_NEXT_JOB(qp->mb_mgr);
1131                 }
1132
1133                 /*
1134                  * Get next operation to process from ingress queue.
1135                  * There is no need to return the job to the MB_MGR
1136                  * if there are no more operations to process, since the MB_MGR
1137                  * can use that pointer again in next get_next calls.
1138                  */
1139                 retval = rte_ring_dequeue(qp->ingress_queue, (void **)&op);
1140                 if (retval < 0)
1141                         break;
1142
1143                 retval = set_mb_job_params(job, qp, op, &digest_idx);
1144                 if (unlikely(retval != 0)) {
1145                         qp->stats.dequeue_err_count++;
1146                         set_job_null_op(job, op);
1147                 }
1148
1149                 /* Submit job to multi-buffer for processing */
1150 #ifdef RTE_LIBRTE_PMD_AESNI_MB_DEBUG
1151                 job = IMB_SUBMIT_JOB(qp->mb_mgr);
1152 #else
1153                 job = IMB_SUBMIT_JOB_NOCHECK(qp->mb_mgr);
1154 #endif
1155                 /*
1156                  * If submit returns a processed job then handle it,
1157                  * before submitting subsequent jobs
1158                  */
1159                 if (job)
1160                         processed_jobs += handle_completed_jobs(qp, job,
1161                                         &ops[processed_jobs],
1162                                         nb_ops - processed_jobs);
1163
1164         } while (processed_jobs < nb_ops);
1165
1166         qp->digest_idx = digest_idx;
1167
1168         if (processed_jobs < 1)
1169                 processed_jobs += flush_mb_mgr(qp,
1170                                 &ops[processed_jobs],
1171                                 nb_ops - processed_jobs);
1172
1173         return processed_jobs;
1174 }
1175
1176 static int cryptodev_aesni_mb_remove(struct rte_vdev_device *vdev);
1177
1178 static int
1179 cryptodev_aesni_mb_create(const char *name,
1180                         struct rte_vdev_device *vdev,
1181                         struct rte_cryptodev_pmd_init_params *init_params)
1182 {
1183         struct rte_cryptodev *dev;
1184         struct aesni_mb_private *internals;
1185         enum aesni_mb_vector_mode vector_mode;
1186         MB_MGR *mb_mgr;
1187
1188         /* Check CPU for support for AES instruction set */
1189         if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_AES)) {
1190                 AESNI_MB_LOG(ERR, "AES instructions not supported by CPU");
1191                 return -EFAULT;
1192         }
1193
1194         dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
1195         if (dev == NULL) {
1196                 AESNI_MB_LOG(ERR, "failed to create cryptodev vdev");
1197                 return -ENODEV;
1198         }
1199
1200         /* Check CPU for supported vector instruction set */
1201         if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
1202                 vector_mode = RTE_AESNI_MB_AVX512;
1203         else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
1204                 vector_mode = RTE_AESNI_MB_AVX2;
1205         else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX))
1206                 vector_mode = RTE_AESNI_MB_AVX;
1207         else
1208                 vector_mode = RTE_AESNI_MB_SSE;
1209
1210         dev->driver_id = cryptodev_driver_id;
1211         dev->dev_ops = rte_aesni_mb_pmd_ops;
1212
1213         /* register rx/tx burst functions for data path */
1214         dev->dequeue_burst = aesni_mb_pmd_dequeue_burst;
1215         dev->enqueue_burst = aesni_mb_pmd_enqueue_burst;
1216
1217         dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
1218                         RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
1219                         RTE_CRYPTODEV_FF_CPU_AESNI;
1220
1221         mb_mgr = alloc_mb_mgr(0);
1222         if (mb_mgr == NULL)
1223                 return -ENOMEM;
1224
1225         switch (vector_mode) {
1226         case RTE_AESNI_MB_SSE:
1227                 dev->feature_flags |= RTE_CRYPTODEV_FF_CPU_SSE;
1228                 init_mb_mgr_sse(mb_mgr);
1229                 break;
1230         case RTE_AESNI_MB_AVX:
1231                 dev->feature_flags |= RTE_CRYPTODEV_FF_CPU_AVX;
1232                 init_mb_mgr_avx(mb_mgr);
1233                 break;
1234         case RTE_AESNI_MB_AVX2:
1235                 dev->feature_flags |= RTE_CRYPTODEV_FF_CPU_AVX2;
1236                 init_mb_mgr_avx2(mb_mgr);
1237                 break;
1238         case RTE_AESNI_MB_AVX512:
1239                 dev->feature_flags |= RTE_CRYPTODEV_FF_CPU_AVX512;
1240                 init_mb_mgr_avx512(mb_mgr);
1241                 break;
1242         default:
1243                 AESNI_MB_LOG(ERR, "Unsupported vector mode %u\n", vector_mode);
1244                 goto error_exit;
1245         }
1246
1247         /* Set vector instructions mode supported */
1248         internals = dev->data->dev_private;
1249
1250         internals->vector_mode = vector_mode;
1251         internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
1252         internals->mb_mgr = mb_mgr;
1253
1254         AESNI_MB_LOG(INFO, "IPSec Multi-buffer library version used: %s\n",
1255                         imb_get_version_str());
1256
1257         return 0;
1258
1259 error_exit:
1260         if (mb_mgr)
1261                 free_mb_mgr(mb_mgr);
1262
1263         rte_cryptodev_pmd_destroy(dev);
1264
1265         return -1;
1266 }
1267
1268 static int
1269 cryptodev_aesni_mb_probe(struct rte_vdev_device *vdev)
1270 {
1271         struct rte_cryptodev_pmd_init_params init_params = {
1272                 "",
1273                 sizeof(struct aesni_mb_private),
1274                 rte_socket_id(),
1275                 RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
1276         };
1277         const char *name, *args;
1278         int retval;
1279
1280         name = rte_vdev_device_name(vdev);
1281         if (name == NULL)
1282                 return -EINVAL;
1283
1284         args = rte_vdev_device_args(vdev);
1285
1286         retval = rte_cryptodev_pmd_parse_input_args(&init_params, args);
1287         if (retval) {
1288                 AESNI_MB_LOG(ERR, "Failed to parse initialisation arguments[%s]",
1289                                 args);
1290                 return -EINVAL;
1291         }
1292
1293         return cryptodev_aesni_mb_create(name, vdev, &init_params);
1294 }
1295
1296 static int
1297 cryptodev_aesni_mb_remove(struct rte_vdev_device *vdev)
1298 {
1299         struct rte_cryptodev *cryptodev;
1300         struct aesni_mb_private *internals;
1301         const char *name;
1302
1303         name = rte_vdev_device_name(vdev);
1304         if (name == NULL)
1305                 return -EINVAL;
1306
1307         cryptodev = rte_cryptodev_pmd_get_named_dev(name);
1308         if (cryptodev == NULL)
1309                 return -ENODEV;
1310
1311         internals = cryptodev->data->dev_private;
1312
1313         free_mb_mgr(internals->mb_mgr);
1314
1315         return rte_cryptodev_pmd_destroy(cryptodev);
1316 }
1317
1318 static struct rte_vdev_driver cryptodev_aesni_mb_pmd_drv = {
1319         .probe = cryptodev_aesni_mb_probe,
1320         .remove = cryptodev_aesni_mb_remove
1321 };
1322
1323 static struct cryptodev_driver aesni_mb_crypto_drv;
1324
1325 RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_AESNI_MB_PMD, cryptodev_aesni_mb_pmd_drv);
1326 RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_AESNI_MB_PMD, cryptodev_aesni_mb_pmd);
1327 RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_MB_PMD,
1328         "max_nb_queue_pairs=<int> "
1329         "socket_id=<int>");
1330 RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_mb_crypto_drv,
1331                 cryptodev_aesni_mb_pmd_drv.driver,
1332                 cryptodev_driver_id);
1333
1334 RTE_INIT(aesni_mb_init_log)
1335 {
1336         aesni_mb_logtype_driver = rte_log_register("pmd.crypto.aesni_mb");
1337 }