remove extra parentheses in return statement

[dpdk.git] / drivers / net / bnx2x / elink.c

/*
 * Copyright (c) 2007-2013 QLogic Corporation. All rights reserved.
 *
 * Eric Davis        <edavis@broadcom.com>
 * David Christensen <davidch@broadcom.com>
 * Gary Zambrano     <zambrano@broadcom.com>
 *
 * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
 * Copyright (c) 2015 QLogic Corporation.
 * All rights reserved.
 * www.qlogic.com
 *
 * See LICENSE.bnx2x_pmd for copyright and licensing details.
 */

#include "bnx2x.h"
#include "elink.h"
#include "ecore_mfw_req.h"
#include "ecore_fw_defs.h"
#include "ecore_hsi.h"
#include "ecore_reg.h"

static elink_status_t elink_link_reset(struct elink_params *params,
                                       struct elink_vars *vars,
                                       uint8_t reset_ext_phy);
static elink_status_t elink_check_half_open_conn(struct elink_params *params,
                                                 struct elink_vars *vars,
                                                 uint8_t notify);
static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
                                                 struct elink_params *params);

#define MDIO_REG_BANK_CL73_IEEEB0                       0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL                0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN     0x0200
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN          0x1000
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST       0x8000

#define MDIO_REG_BANK_CL73_IEEEB1                       0x10
#define MDIO_CL73_IEEEB1_AN_ADV1                        0x00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE                  0x0400
#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC             0x0800
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH             0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK             0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV2                                0x01
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M             0x0000
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX          0x0020
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4           0x0040
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR            0x0080
#define MDIO_CL73_IEEEB1_AN_LP_ADV1                     0x03
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE               0x0400
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC          0x0800
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH          0x0C00
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK          0x0C00
#define MDIO_CL73_IEEEB1_AN_LP_ADV2                     0x04

#define MDIO_REG_BANK_RX0                               0x80b0
#define MDIO_RX0_RX_STATUS                              0x10
#define MDIO_RX0_RX_STATUS_SIGDET                       0x8000
#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE                  0x1000
#define MDIO_RX0_RX_EQ_BOOST                            0x1c
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX1                               0x80c0
#define MDIO_RX1_RX_EQ_BOOST                            0x1c
#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX2                               0x80d0
#define MDIO_RX2_RX_EQ_BOOST                            0x1c
#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX3                               0x80e0
#define MDIO_RX3_RX_EQ_BOOST                            0x1c
#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX_ALL                            0x80f0
#define MDIO_RX_ALL_RX_EQ_BOOST                         0x1c
#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK     0x7
#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL     0x10

#define MDIO_REG_BANK_TX0                               0x8060
#define MDIO_TX0_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX1                               0x8070
#define MDIO_TX1_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX2                               0x8080
#define MDIO_TX2_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX3                               0x8090
#define MDIO_TX3_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_XGXS_BLOCK0                       0x8000
#define MDIO_BLOCK0_XGXS_CONTROL                        0x10

#define MDIO_REG_BANK_XGXS_BLOCK1                       0x8010
#define MDIO_BLOCK1_LANE_CTRL0                          0x15
#define MDIO_BLOCK1_LANE_CTRL1                          0x16
#define MDIO_BLOCK1_LANE_CTRL2                          0x17
#define MDIO_BLOCK1_LANE_PRBS                           0x19

#define MDIO_REG_BANK_XGXS_BLOCK2                       0x8100
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP                     0x10
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE              0x8000
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE        0x4000
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP             0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE              0x8000
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G       0x14
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS      0x0001
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS    0x0010
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE         0x15

#define MDIO_REG_BANK_GP_STATUS                         0x8120
#define MDIO_GP_STATUS_TOP_AN_STATUS1                           0x1B
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE     0x0001
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE     0x0002
#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS               0x0004
#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS             0x0008
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE     0x0010
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE       0x0020
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE    0x0040
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE    0x0080
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK         0x3f00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M          0x0000
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M         0x0100
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G           0x0200
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G         0x0300
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G           0x0400
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G           0x0500
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG      0x0600
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4      0x0700
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG      0x0800
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G        0x0900
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G          0x0A00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G          0x0B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G          0x0C00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX        0x0D00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4      0x0E00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR       0x0F00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI      0x1B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS    0x1E00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI      0x1F00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2      0x3900

#define MDIO_REG_BANK_10G_PARALLEL_DETECT               0x8130
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS             0x10
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK             0x8000
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL            0x11
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN       0x1
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK               0x13
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT           (0xb71<<1)

#define MDIO_REG_BANK_SERDES_DIGITAL                    0x8300
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1                    0x10
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE                 0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF                     0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN           0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT       0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET                    0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE                  0x0020
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2                    0x11
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN                  0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR                 0x0040
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1                     0x14
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII                       0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK                        0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX                      0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK                  0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT                 3
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G                  0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G                    0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M                  0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M                   0x0000
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2                     0x15
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED                 0x0002
#define MDIO_SERDES_DIGITAL_MISC1                               0x18
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK                       0xE000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M                        0x0000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M                       0x2000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M                       0x4000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M                    0x6000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M                     0x8000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL                       0x0010
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK                      0x000f
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G                      0x0000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G                        0x0001
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G                        0x0002
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG                   0x0003
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4                   0x0004
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G                       0x0005
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G                     0x0006
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G                       0x0007
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G                       0x0008
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G                       0x0009

#define MDIO_REG_BANK_OVER_1G                           0x8320
#define MDIO_OVER_1G_DIGCTL_3_4                                 0x14
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK                              0xffe0
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT                             5
#define MDIO_OVER_1G_UP1                                        0x19
#define MDIO_OVER_1G_UP1_2_5G                                           0x0001
#define MDIO_OVER_1G_UP1_5G                                             0x0002
#define MDIO_OVER_1G_UP1_6G                                             0x0004
#define MDIO_OVER_1G_UP1_10G                                            0x0010
#define MDIO_OVER_1G_UP1_10GH                                           0x0008
#define MDIO_OVER_1G_UP1_12G                                            0x0020
#define MDIO_OVER_1G_UP1_12_5G                                          0x0040
#define MDIO_OVER_1G_UP1_13G                                            0x0080
#define MDIO_OVER_1G_UP1_15G                                            0x0100
#define MDIO_OVER_1G_UP1_16G                                            0x0200
#define MDIO_OVER_1G_UP2                                        0x1A
#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK                                0x0007
#define MDIO_OVER_1G_UP2_IDRIVER_MASK                                   0x0038
#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK                               0x03C0
#define MDIO_OVER_1G_UP3                                        0x1B
#define MDIO_OVER_1G_UP3_HIGIG2                                         0x0001
#define MDIO_OVER_1G_LP_UP1                                     0x1C
#define MDIO_OVER_1G_LP_UP2                                     0x1D
#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK                         0x03ff
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK                            0x0780
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT                           7
#define MDIO_OVER_1G_LP_UP3                                             0x1E

#define MDIO_REG_BANK_REMOTE_PHY                        0x8330
#define MDIO_REMOTE_PHY_MISC_RX_STATUS                          0x10
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG     0x0010
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG   0x0600

#define MDIO_REG_BANK_BAM_NEXT_PAGE                     0x8350
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL                   0x10
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE                  0x0001
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN                  0x0002

#define MDIO_REG_BANK_CL73_USERB0               0x8370
#define MDIO_CL73_USERB0_CL73_UCTRL                             0x10
#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL                       0x0002
#define MDIO_CL73_USERB0_CL73_USTAT1                            0x11
#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK                  0x0100
#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37                0x0400
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1                         0x12
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN                          0x8000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN             0x4000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN              0x2000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3                         0x14
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR                 0x0001

#define MDIO_REG_BANK_AER_BLOCK                 0xFFD0
#define MDIO_AER_BLOCK_AER_REG                                  0x1E

#define MDIO_REG_BANK_COMBO_IEEE0               0xFFE0
#define MDIO_COMBO_IEEE0_MII_CONTROL                            0x10
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK                   0x2040
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10                     0x0000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100                    0x2000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000                   0x0040
#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX                         0x0100
#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN                          0x0200
#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN                               0x1000
#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK                            0x4000
#define MDIO_COMBO_IEEO_MII_CONTROL_RESET                               0x8000
#define MDIO_COMBO_IEEE0_MII_STATUS                             0x11
#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS                           0x0004
#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE                    0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV                           0x14
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX                       0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX                       0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK                        0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE                        0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC                   0x0080
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC                  0x0100
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH                        0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE                         0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1         0x15
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE       0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK             0x4000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK      0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE      0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH      0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP    0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP    0x0020
/*WhenthelinkpartnerisinSGMIImode(bit0=1),then
bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
Theotherbitsarereservedandshouldbezero*/
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE      0x0001

#define MDIO_PMA_DEVAD                  0x1
/*ieee*/
#define MDIO_PMA_REG_CTRL               0x0
#define MDIO_PMA_REG_STATUS             0x1
#define MDIO_PMA_REG_10G_CTRL2          0x7
#define MDIO_PMA_REG_TX_DISABLE         0x0009
#define MDIO_PMA_REG_RX_SD              0xa
/*bnx2x*/
#define MDIO_PMA_REG_BNX2X_CTRL         0x0096
#define MDIO_PMA_REG_FEC_CTRL           0x00ab
#define MDIO_PMA_LASI_RXCTRL            0x9000
#define MDIO_PMA_LASI_TXCTRL            0x9001
#define MDIO_PMA_LASI_CTRL              0x9002
#define MDIO_PMA_LASI_RXSTAT            0x9003
#define MDIO_PMA_LASI_TXSTAT            0x9004
#define MDIO_PMA_LASI_STAT              0x9005
#define MDIO_PMA_REG_PHY_IDENTIFIER     0xc800
#define MDIO_PMA_REG_DIGITAL_CTRL       0xc808
#define MDIO_PMA_REG_DIGITAL_STATUS     0xc809
#define MDIO_PMA_REG_TX_POWER_DOWN      0xca02
#define MDIO_PMA_REG_CMU_PLL_BYPASS     0xca09
#define MDIO_PMA_REG_MISC_CTRL          0xca0a
#define MDIO_PMA_REG_GEN_CTRL           0xca10
#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP     0x0188
#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET           0x018a
#define MDIO_PMA_REG_M8051_MSGIN_REG    0xca12
#define MDIO_PMA_REG_M8051_MSGOUT_REG   0xca13
#define MDIO_PMA_REG_ROM_VER1           0xca19
#define MDIO_PMA_REG_ROM_VER2           0xca1a
#define MDIO_PMA_REG_EDC_FFE_MAIN       0xca1b
#define MDIO_PMA_REG_PLL_BANDWIDTH      0xca1d
#define MDIO_PMA_REG_PLL_CTRL           0xca1e
#define MDIO_PMA_REG_MISC_CTRL0         0xca23
#define MDIO_PMA_REG_LRM_MODE           0xca3f
#define MDIO_PMA_REG_CDR_BANDWIDTH      0xca46
#define MDIO_PMA_REG_MISC_CTRL1         0xca85

#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL          0x8000
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK      0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE           0x0000
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE       0x0004
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS    0x0008
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED         0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT      0x8002
#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR      0x8003
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF     0xc820
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8726_TX_CTRL1              0xca01
#define MDIO_PMA_REG_8726_TX_CTRL2              0xca05

#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR   0x8005
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF     0x8007
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8727_MISC_CTRL             0x8309
#define MDIO_PMA_REG_8727_TX_CTRL1              0xca02
#define MDIO_PMA_REG_8727_TX_CTRL2              0xca05
#define MDIO_PMA_REG_8727_PCS_OPT_CTRL          0xc808
#define MDIO_PMA_REG_8727_GPIO_CTRL             0xc80e
#define MDIO_PMA_REG_8727_PCS_GP                0xc842
#define MDIO_PMA_REG_8727_OPT_CFG_REG           0xc8e4

#define MDIO_AN_REG_8727_MISC_CTRL              0x8309
#define MDIO_PMA_REG_8073_CHIP_REV                      0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS             0xc820
#define MDIO_PMA_REG_8073_XAUI_WA                       0xc841
#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL              0xcd08

#define MDIO_PMA_REG_7101_RESET         0xc000
#define MDIO_PMA_REG_7107_LED_CNTL      0xc007
#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
#define MDIO_PMA_REG_7101_VER1          0xc026
#define MDIO_PMA_REG_7101_VER2          0xc027

#define MDIO_PMA_REG_8481_PMD_SIGNAL    0xa811
#define MDIO_PMA_REG_8481_LED1_MASK     0xa82c
#define MDIO_PMA_REG_8481_LED2_MASK     0xa82f
#define MDIO_PMA_REG_8481_LED3_MASK     0xa832
#define MDIO_PMA_REG_8481_LED3_BLINK    0xa834
#define MDIO_PMA_REG_8481_LED5_MASK                     0xa838
#define MDIO_PMA_REG_8481_SIGNAL_MASK   0xa835
#define MDIO_PMA_REG_8481_LINK_SIGNAL   0xa83b
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK  0x800
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11

#define MDIO_WIS_DEVAD                  0x2
/*bnx2x*/
#define MDIO_WIS_REG_LASI_CNTL          0x9002
#define MDIO_WIS_REG_LASI_STATUS        0x9005

#define MDIO_PCS_DEVAD                  0x3
#define MDIO_PCS_REG_STATUS             0x0020
#define MDIO_PCS_REG_LASI_STATUS        0x9005
#define MDIO_PCS_REG_7101_DSP_ACCESS    0xD000
#define MDIO_PCS_REG_7101_SPI_MUX       0xD008
#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD   (0xC7)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028

#define MDIO_XS_DEVAD                   0x4
#define MDIO_XS_REG_STATUS              0x0001
#define MDIO_XS_PLL_SEQUENCER           0x8000
#define MDIO_XS_SFX7101_XGXS_TEST1      0xc00a

#define MDIO_XS_8706_REG_BANK_RX0       0x80bc
#define MDIO_XS_8706_REG_BANK_RX1       0x80cc
#define MDIO_XS_8706_REG_BANK_RX2       0x80dc
#define MDIO_XS_8706_REG_BANK_RX3       0x80ec
#define MDIO_XS_8706_REG_BANK_RXA       0x80fc

#define MDIO_XS_REG_8073_RX_CTRL_PCIE   0x80FA

#define MDIO_AN_DEVAD                   0x7
/*ieee*/
#define MDIO_AN_REG_CTRL                0x0000
#define MDIO_AN_REG_STATUS              0x0001
#define MDIO_AN_REG_STATUS_AN_COMPLETE          0x0020
#define MDIO_AN_REG_ADV_PAUSE           0x0010
#define MDIO_AN_REG_ADV_PAUSE_PAUSE             0x0400
#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC        0x0800
#define MDIO_AN_REG_ADV_PAUSE_BOTH              0x0C00
#define MDIO_AN_REG_ADV_PAUSE_MASK              0x0C00
#define MDIO_AN_REG_ADV                 0x0011
#define MDIO_AN_REG_ADV2                0x0012
#define MDIO_AN_REG_LP_AUTO_NEG         0x0013
#define MDIO_AN_REG_LP_AUTO_NEG2        0x0014
#define MDIO_AN_REG_MASTER_STATUS       0x0021
#define MDIO_AN_REG_EEE_ADV             0x003c
#define MDIO_AN_REG_LP_EEE_ADV          0x003d
/*bnx2x*/
#define MDIO_AN_REG_LINK_STATUS         0x8304
#define MDIO_AN_REG_CL37_CL73           0x8370
#define MDIO_AN_REG_CL37_AN             0xffe0
#define MDIO_AN_REG_CL37_FC_LD          0xffe4
#define         MDIO_AN_REG_CL37_FC_LP          0xffe5
#define         MDIO_AN_REG_1000T_STATUS        0xffea

#define MDIO_AN_REG_8073_2_5G           0x8329
#define MDIO_AN_REG_8073_BAM            0x8350

#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL      0x0020
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL        0xffe0
#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G      0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS      0xffe1
#define MDIO_AN_REG_8481_LEGACY_AN_ADV          0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION    0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL             0xffe9
#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL       0xfff0
#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF        0x0008
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW    0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS   0xfff7
#define MDIO_AN_REG_8481_AUX_CTRL               0xfff8
#define MDIO_AN_REG_8481_LEGACY_SHADOW          0xfffc

/* BNX2X84823 only */
#define MDIO_CTL_DEVAD                  0x1e
#define MDIO_CTL_REG_84823_MEDIA                0x401a
#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK               0x0018
        /* These pins configure the BNX2X84823 interface to MAC after reset. */
#define MDIO_CTL_REG_84823_CTRL_MAC_XFI                 0x0008
#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M             0x0010
        /* These pins configure the BNX2X84823 interface to Line after reset. */
#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK              0x0060
#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L            0x0020
#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI               0x0040
        /* When this pin is active high during reset, 10GBASE-T core is power
         * down, When it is active low the 10GBASE-T is power up
         */
#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN       0x0080
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK          0x0100
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER        0x0000
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER         0x0100
#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G                       0x1000
#define MDIO_CTL_REG_84823_USER_CTRL_REG                        0x4005
#define MDIO_CTL_REG_84823_USER_CTRL_CMS                        0x0080
#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH                0xa82b
#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ        0x2f
#define MDIO_PMA_REG_84823_CTL_LED_CTL_1                        0xa8e3
#define MDIO_PMA_REG_84833_CTL_LED_CTL_1                        0xa8ec
#define MDIO_PMA_REG_84823_LED3_STRETCH_EN                      0x0080

/* BNX2X84833 only */
#define MDIO_84833_TOP_CFG_FW_REV                       0x400f
#define MDIO_84833_TOP_CFG_FW_EEE               0x10b1
#define MDIO_84833_TOP_CFG_FW_NO_EEE            0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1                 0x401a
#define MDIO_84833_SUPER_ISOLATE                0x8000
/* These are mailbox register set used by 84833. */
#define MDIO_84833_TOP_CFG_SCRATCH_REG0                 0x4005
#define MDIO_84833_TOP_CFG_SCRATCH_REG1                 0x4006
#define MDIO_84833_TOP_CFG_SCRATCH_REG2                 0x4007
#define MDIO_84833_TOP_CFG_SCRATCH_REG3                 0x4008
#define MDIO_84833_TOP_CFG_SCRATCH_REG4                 0x4009
#define MDIO_84833_TOP_CFG_SCRATCH_REG26                0x4037
#define MDIO_84833_TOP_CFG_SCRATCH_REG27                0x4038
#define MDIO_84833_TOP_CFG_SCRATCH_REG28                0x4039
#define MDIO_84833_TOP_CFG_SCRATCH_REG29                0x403a
#define MDIO_84833_TOP_CFG_SCRATCH_REG30                0x403b
#define MDIO_84833_TOP_CFG_SCRATCH_REG31                0x403c
#define MDIO_84833_CMD_HDLR_COMMAND     MDIO_84833_TOP_CFG_SCRATCH_REG0
#define MDIO_84833_CMD_HDLR_STATUS      MDIO_84833_TOP_CFG_SCRATCH_REG26
#define MDIO_84833_CMD_HDLR_DATA1       MDIO_84833_TOP_CFG_SCRATCH_REG27
#define MDIO_84833_CMD_HDLR_DATA2       MDIO_84833_TOP_CFG_SCRATCH_REG28
#define MDIO_84833_CMD_HDLR_DATA3       MDIO_84833_TOP_CFG_SCRATCH_REG29
#define MDIO_84833_CMD_HDLR_DATA4       MDIO_84833_TOP_CFG_SCRATCH_REG30
#define MDIO_84833_CMD_HDLR_DATA5       MDIO_84833_TOP_CFG_SCRATCH_REG31

/* Mailbox command set used by 84833. */
#define PHY84833_CMD_SET_PAIR_SWAP                      0x8001
#define PHY84833_CMD_GET_EEE_MODE                       0x8008
#define PHY84833_CMD_SET_EEE_MODE                       0x8009
#define PHY84833_CMD_GET_CURRENT_TEMP                   0x8031
/* Mailbox status set used by 84833. */
#define PHY84833_STATUS_CMD_RECEIVED                    0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS                 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS               0x0004
#define PHY84833_STATUS_CMD_COMPLETE_ERROR              0x0008
#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS               0x0010
#define PHY84833_STATUS_CMD_SYSTEM_BOOT                 0x0020
#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS           0x0040
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE              0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE               0xa5a5

/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD                                   0x3
#define MDIO_WC_REG_IEEE0BLK_MIICNTL                    0x0
#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP                  0x7
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0       0x10
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1       0x11
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2       0x12
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY     0x4000
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ         0x8000
#define MDIO_WC_REG_PCS_STATUS2                         0x0021
#define MDIO_WC_REG_PMD_KR_CONTROL                      0x0096
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL                0x8000
#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1               0x800e
#define MDIO_WC_REG_XGXSBLK1_DESKEW                     0x8010
#define MDIO_WC_REG_XGXSBLK1_LANECTRL0                  0x8015
#define MDIO_WC_REG_XGXSBLK1_LANECTRL1                  0x8016
#define MDIO_WC_REG_XGXSBLK1_LANECTRL2                  0x8017
#define MDIO_WC_REG_XGXSBLK1_LANECTRL3                  0x8018
#define MDIO_WC_REG_XGXSBLK1_LANETEST0                  0x801a
#define MDIO_WC_REG_TX0_ANA_CTRL0                       0x8061
#define MDIO_WC_REG_TX1_ANA_CTRL0                       0x8071
#define MDIO_WC_REG_TX2_ANA_CTRL0                       0x8081
#define MDIO_WC_REG_TX3_ANA_CTRL0                       0x8091
#define MDIO_WC_REG_TX0_TX_DRIVER                       0x8067
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET            0x04
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK                      0x00f0
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET                0x08
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK                          0x0f00
#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET            0x0c
#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK                      0x7000
#define MDIO_WC_REG_TX1_TX_DRIVER                       0x8077
#define MDIO_WC_REG_TX2_TX_DRIVER                       0x8087
#define MDIO_WC_REG_TX3_TX_DRIVER                       0x8097
#define MDIO_WC_REG_RX0_ANARXCONTROL1G                  0x80b9
#define MDIO_WC_REG_RX2_ANARXCONTROL1G                  0x80d9
#define MDIO_WC_REG_RX0_PCI_CTRL                        0x80ba
#define MDIO_WC_REG_RX1_PCI_CTRL                        0x80ca
#define MDIO_WC_REG_RX2_PCI_CTRL                        0x80da
#define MDIO_WC_REG_RX3_PCI_CTRL                        0x80ea
#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G           0x8104
#define MDIO_WC_REG_XGXS_STATUS3                        0x8129
#define MDIO_WC_REG_PAR_DET_10G_STATUS                  0x8130
#define MDIO_WC_REG_PAR_DET_10G_CTRL                    0x8131
#define MDIO_WC_REG_XGXS_STATUS4                        0x813c
#define MDIO_WC_REG_XGXS_X2_CONTROL2                    0x8141
#define MDIO_WC_REG_XGXS_X2_CONTROL3                    0x8142
#define MDIO_WC_REG_XGXS_RX_LN_SWAP1                    0x816B
#define MDIO_WC_REG_XGXS_TX_LN_SWAP1                    0x8169
#define MDIO_WC_REG_GP2_STATUS_GP_2_0                   0x81d0
#define MDIO_WC_REG_GP2_STATUS_GP_2_1                   0x81d1
#define MDIO_WC_REG_GP2_STATUS_GP_2_2                   0x81d2
#define MDIO_WC_REG_GP2_STATUS_GP_2_3                   0x81d3
#define MDIO_WC_REG_GP2_STATUS_GP_2_4                   0x81d4
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1
#define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP                0x81EE
#define MDIO_WC_REG_UC_INFO_B1_VERSION                  0x81F0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE            0x81F2
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET    0x0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT        0x0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR     0x1
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC        0x2
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI      0x3
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G     0x4
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET    0x4
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET    0x8
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET    0xc
#define MDIO_WC_REG_UC_INFO_B1_CRC                      0x81FE
#define MDIO_WC_REG_DSC1B0_UC_CTRL                              0x820e
#define MDIO_WC_REG_DSC1B0_UC_CTRL_RDY4CMD                      (1<<7)
#define MDIO_WC_REG_DSC_SMC                             0x8213
#define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0               0x821e
#define MDIO_WC_REG_TX_FIR_TAP                          0x82e2
#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET           0x00
#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK                     0x000f
#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET          0x04
#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK            0x03f0
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET          0x0a
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK            0x7c00
#define MDIO_WC_REG_TX_FIR_TAP_ENABLE           0x8000
#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP         0x82e2
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL      0x82e3
#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL        0x82e6
#define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL        0x82e7
#define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL       0x82e8
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL      0x82ec
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1         0x8300
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2         0x8301
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3         0x8302
#define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1          0x8304
#define MDIO_WC_REG_SERDESDIGITAL_MISC1                 0x8308
#define MDIO_WC_REG_SERDESDIGITAL_MISC2                 0x8309
#define MDIO_WC_REG_DIGITAL3_UP1                        0x8329
#define MDIO_WC_REG_DIGITAL3_LP_UP1                     0x832c
#define MDIO_WC_REG_DIGITAL4_MISC3                      0x833c
#define MDIO_WC_REG_DIGITAL4_MISC5                      0x833e
#define MDIO_WC_REG_DIGITAL5_MISC6                      0x8345
#define MDIO_WC_REG_DIGITAL5_MISC7                      0x8349
#define MDIO_WC_REG_DIGITAL5_LINK_STATUS                0x834d
#define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED               0x834e
#define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL           0x8350
#define MDIO_WC_REG_CL49_USERB0_CTRL                    0x8368
#define MDIO_WC_REG_CL73_USERB0_CTRL                    0x8370
#define MDIO_WC_REG_CL73_USERB0_USTAT                   0x8371
#define MDIO_WC_REG_CL73_BAM_CTRL1                      0x8372
#define MDIO_WC_REG_CL73_BAM_CTRL2                      0x8373
#define MDIO_WC_REG_CL73_BAM_CTRL3                      0x8374
#define MDIO_WC_REG_CL73_BAM_CODE_FIELD                 0x837b
#define MDIO_WC_REG_EEE_COMBO_CONTROL0                  0x8390
#define MDIO_WC_REG_TX66_CONTROL                        0x83b0
#define MDIO_WC_REG_RX66_CONTROL                        0x83c0
#define MDIO_WC_REG_RX66_SCW0                           0x83c2
#define MDIO_WC_REG_RX66_SCW1                           0x83c3
#define MDIO_WC_REG_RX66_SCW2                           0x83c4
#define MDIO_WC_REG_RX66_SCW3                           0x83c5
#define MDIO_WC_REG_RX66_SCW0_MASK                      0x83c6
#define MDIO_WC_REG_RX66_SCW1_MASK                      0x83c7
#define MDIO_WC_REG_RX66_SCW2_MASK                      0x83c8
#define MDIO_WC_REG_RX66_SCW3_MASK                      0x83c9
#define MDIO_WC_REG_FX100_CTRL1                         0x8400
#define MDIO_WC_REG_FX100_CTRL3                         0x8402
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5                0x8436
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6                0x8437
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7                0x8438
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9                0x8439
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10               0x843a
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11               0x843b
#define MDIO_WC_REG_ETA_CL73_OUI1                       0x8453
#define MDIO_WC_REG_ETA_CL73_OUI2                       0x8454
#define MDIO_WC_REG_ETA_CL73_OUI3                       0x8455
#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE                0x8456
#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE                 0x8457
#define MDIO_WC_REG_MICROBLK_CMD                        0xffc2
#define MDIO_WC_REG_MICROBLK_DL_STATUS                  0xffc5
#define MDIO_WC_REG_MICROBLK_CMD3                       0xffcc

#define MDIO_WC_REG_AERBLK_AER                          0xffde
#define MDIO_WC_REG_COMBO_IEEE0_MIICTRL                 0xffe0
#define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT                0xffe1

#define MDIO_WC0_XGXS_BLK2_LANE_RESET                   0x810A
#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT       0
#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT       4

#define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2             0x8141

#define DIGITAL5_ACTUAL_SPEED_TX_MASK                   0x003f

/* 54618se */
#define MDIO_REG_GPHY_MII_STATUS                        0x1
#define MDIO_REG_GPHY_PHYID_LSB                         0x3
#define MDIO_REG_GPHY_CL45_ADDR_REG                     0xd
#define MDIO_REG_GPHY_CL45_REG_WRITE            0x4000
#define MDIO_REG_GPHY_CL45_REG_READ             0xc000
#define MDIO_REG_GPHY_CL45_DATA_REG                     0xe
#define MDIO_REG_GPHY_EEE_RESOLVED              0x803e
#define MDIO_REG_GPHY_EXP_ACCESS_GATE                   0x15
#define MDIO_REG_GPHY_EXP_ACCESS                        0x17
#define MDIO_REG_GPHY_EXP_ACCESS_TOP            0xd00
#define MDIO_REG_GPHY_EXP_TOP_2K_BUF            0x40
#define MDIO_REG_GPHY_AUX_STATUS                        0x19
#define MDIO_REG_INTR_STATUS                            0x1a
#define MDIO_REG_INTR_MASK                              0x1b
#define MDIO_REG_INTR_MASK_LINK_STATUS                  (0x1 << 1)
#define MDIO_REG_GPHY_SHADOW                            0x1c
#define MDIO_REG_GPHY_SHADOW_LED_SEL1                   (0x0d << 10)
#define MDIO_REG_GPHY_SHADOW_LED_SEL2                   (0x0e << 10)
#define MDIO_REG_GPHY_SHADOW_WR_ENA                     (0x1 << 15)
#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED               (0x1e << 10)
#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD              (0x1 << 8)

typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy,
                                                        struct elink_params *
                                                        params,
                                                        uint8_t dev_addr,
                                                        uint16_t addr,
                                                        uint8_t byte_cnt,
                                                        uint8_t * o_buf,
                                                        uint8_t);
/********************************************************/
#define ELINK_ETH_HLEN                  14
/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
#define ELINK_ETH_OVREHEAD                      (ELINK_ETH_HLEN + 8 + 8)
#define ELINK_ETH_MIN_PACKET_SIZE               60
#define ELINK_ETH_MAX_PACKET_SIZE               1500
#define ELINK_ETH_MAX_JUMBO_PACKET_SIZE 9600
#define ELINK_MDIO_ACCESS_TIMEOUT               1000
#define WC_LANE_MAX                     4
#define I2C_SWITCH_WIDTH                2
#define I2C_BSC0                        0
#define I2C_BSC1                        1
#define I2C_WA_RETRY_CNT                3
#define I2C_WA_PWR_ITER                 (I2C_WA_RETRY_CNT - 1)
#define MCPR_IMC_COMMAND_READ_OP        1
#define MCPR_IMC_COMMAND_WRITE_OP       2

/* LED Blink rate that will achieve ~15.9Hz */
#define LED_BLINK_RATE_VAL_E3           354
#define LED_BLINK_RATE_VAL_E1X_E2       480
/***********************************************************/
/*                      Shortcut definitions               */
/***********************************************************/

#define ELINK_NIG_LATCH_BC_ENABLE_MI_INT 0

#define ELINK_NIG_STATUS_EMAC0_MI_INT \
                NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT
#define ELINK_NIG_STATUS_XGXS0_LINK10G \
                NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
#define ELINK_NIG_STATUS_XGXS0_LINK_STATUS \
                NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
#define ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
                NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
#define ELINK_NIG_STATUS_SERDES0_LINK_STATUS \
                NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
#define ELINK_NIG_MASK_MI_INT \
                NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
#define ELINK_NIG_MASK_XGXS0_LINK10G \
                NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
#define ELINK_NIG_MASK_XGXS0_LINK_STATUS \
                NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
#define ELINK_NIG_MASK_SERDES0_LINK_STATUS \
                NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS

#define ELINK_MDIO_AN_CL73_OR_37_COMPLETE \
                (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
                 MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)

#define ELINK_XGXS_RESET_BITS \
        (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW |   \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ |      \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN |    \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)

#define ELINK_SERDES_RESET_BITS \
        (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ |    \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN |  \
         MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)

#define ELINK_AUTONEG_CL37              SHARED_HW_CFG_AN_ENABLE_CL37
#define ELINK_AUTONEG_CL73              SHARED_HW_CFG_AN_ENABLE_CL73
#define ELINK_AUTONEG_BAM               SHARED_HW_CFG_AN_ENABLE_BAM
#define ELINK_AUTONEG_PARALLEL \
                                SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
#define ELINK_AUTONEG_SGMII_FIBER_AUTODET \
                                SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
#define ELINK_AUTONEG_REMOTE_PHY        SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY

#define ELINK_GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
#define ELINK_GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
#define ELINK_GP_STATUS_SPEED_MASK \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
#define ELINK_GP_STATUS_10M     MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
#define ELINK_GP_STATUS_100M    MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
#define ELINK_GP_STATUS_1G      MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
#define ELINK_GP_STATUS_2_5G    MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
#define ELINK_GP_STATUS_5G      MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
#define ELINK_GP_STATUS_6G      MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
#define ELINK_GP_STATUS_10G_HIG \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
#define ELINK_GP_STATUS_10G_CX4 \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
#define ELINK_GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
#define ELINK_GP_STATUS_10G_KX4 \
                        MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
#define ELINK_GP_STATUS_10G_KR MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR
#define ELINK_GP_STATUS_10G_XFI   MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI
#define ELINK_GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS
#define ELINK_GP_STATUS_10G_SFI   MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI
#define ELINK_GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2
#define ELINK_LINK_10THD                LINK_STATUS_SPEED_AND_DUPLEX_10THD
#define ELINK_LINK_10TFD                LINK_STATUS_SPEED_AND_DUPLEX_10TFD
#define ELINK_LINK_100TXHD              LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
#define ELINK_LINK_100T4                LINK_STATUS_SPEED_AND_DUPLEX_100T4
#define ELINK_LINK_100TXFD              LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
#define ELINK_LINK_1000THD              LINK_STATUS_SPEED_AND_DUPLEX_1000THD
#define ELINK_LINK_1000TFD              LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
#define ELINK_LINK_1000XFD              LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
#define ELINK_LINK_2500THD              LINK_STATUS_SPEED_AND_DUPLEX_2500THD
#define ELINK_LINK_2500TFD              LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
#define ELINK_LINK_2500XFD              LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
#define ELINK_LINK_10GTFD               LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
#define ELINK_LINK_10GXFD               LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
#define ELINK_LINK_20GTFD               LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define ELINK_LINK_20GXFD               LINK_STATUS_SPEED_AND_DUPLEX_20GXFD

#define ELINK_LINK_UPDATE_MASK \
                        (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
                         LINK_STATUS_LINK_UP | \
                         LINK_STATUS_PHYSICAL_LINK_FLAG | \
                         LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
                         LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
                         LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
                         LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
                         LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
                         LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)

#define ELINK_SFP_EEPROM_CON_TYPE_ADDR          0x2
#define ELINK_SFP_EEPROM_CON_TYPE_VAL_LC        0x7
#define ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER    0x21
#define ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45      0x22

#define ELINK_SFP_EEPROM_COMP_CODE_ADDR         0x3
#define ELINK_SFP_EEPROM_COMP_CODE_SR_MASK      (1<<4)
#define ELINK_SFP_EEPROM_COMP_CODE_LR_MASK      (1<<5)
#define ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK     (1<<6)

#define ELINK_SFP_EEPROM_FC_TX_TECH_ADDR                0x8
#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE  0x8

#define ELINK_SFP_EEPROM_OPTIONS_ADDR                   0x40
#define ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
#define ELINK_SFP_EEPROM_OPTIONS_SIZE                   2

#define ELINK_EDC_MODE_LINEAR                           0x0022
#define ELINK_EDC_MODE_LIMITING                         0x0044
#define ELINK_EDC_MODE_PASSIVE_DAC                      0x0055
#define ELINK_EDC_MODE_ACTIVE_DAC                       0x0066

/* ETS defines*/
#define DCBX_INVALID_COS                                        (0xFF)

#define ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND           (0x5000)
#define ELINK_ETS_BW_LIMIT_CREDIT_WEIGHT                (0x5000)
#define ELINK_ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS               (1360)
#define ELINK_ETS_E3B0_NIG_MIN_W_VAL_20GBPS                     (2720)
#define ELINK_ETS_E3B0_PBF_MIN_W_VAL                            (10000)

#define ELINK_MAX_PACKET_SIZE                                   (9700)
#define MAX_KR_LINK_RETRY                               4

/**********************************************************/
/*                     INTERFACE                          */
/**********************************************************/

#define CL22_WR_OVER_CL45(_sc, _phy, _bank, _addr, _val) \
        elink_cl45_write(_sc, _phy, \
                (_phy)->def_md_devad, \
                (_bank + (_addr & 0xf)), \
                _val)

#define CL22_RD_OVER_CL45(_sc, _phy, _bank, _addr, _val) \
        elink_cl45_read(_sc, _phy, \
                (_phy)->def_md_devad, \
                (_bank + (_addr & 0xf)), \
                _val)

static uint32_t elink_bits_en(struct bnx2x_softc *sc, uint32_t reg, uint32_t bits)
{
        uint32_t val = REG_RD(sc, reg);

        val |= bits;
        REG_WR(sc, reg, val);
        return val;
}

static uint32_t elink_bits_dis(struct bnx2x_softc *sc, uint32_t reg,
                               uint32_t bits)
{
        uint32_t val = REG_RD(sc, reg);

        val &= ~bits;
        REG_WR(sc, reg, val);
        return val;
}

/*
 * elink_check_lfa - This function checks if link reinitialization is required,
 *                   or link flap can be avoided.
 *
 * @params:     link parameters
 * Returns 0 if Link Flap Avoidance conditions are met otherwise, the failed
 *         condition code.
 */
static int elink_check_lfa(struct elink_params *params)
{
        uint32_t link_status, cfg_idx, lfa_mask, cfg_size;
        uint32_t cur_speed_cap_mask, cur_req_fc_auto_adv, additional_config;
        uint32_t saved_val, req_val, eee_status;
        struct bnx2x_softc *sc = params->sc;

        additional_config =
            REG_RD(sc, params->lfa_base +
                   offsetof(struct shmem_lfa, additional_config));

        /* NOTE: must be first condition checked -
         * to verify DCC bit is cleared in any case!
         */
        if (additional_config & NO_LFA_DUE_TO_DCC_MASK) {
                PMD_DRV_LOG(DEBUG, "No LFA due to DCC flap after clp exit");
                REG_WR(sc, params->lfa_base +
                       offsetof(struct shmem_lfa, additional_config),
                       additional_config & ~NO_LFA_DUE_TO_DCC_MASK);
                return LFA_DCC_LFA_DISABLED;
        }

        /* Verify that link is up */
        link_status = REG_RD(sc, params->shmem_base +
                             offsetof(struct shmem_region,
                                      port_mb[params->port].link_status));
        if (!(link_status & LINK_STATUS_LINK_UP))
                return LFA_LINK_DOWN;

        /* if loaded after BOOT from SAN, don't flap the link in any case and
         * rely on link set by preboot driver
         */
        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_BOOT_FROM_SAN)
                return 0;

        /* Verify that loopback mode is not set */
        if (params->loopback_mode)
                return LFA_LOOPBACK_ENABLED;

        /* Verify that MFW supports LFA */
        if (!params->lfa_base)
                return LFA_MFW_IS_TOO_OLD;

        if (params->num_phys == 3) {
                cfg_size = 2;
                lfa_mask = 0xffffffff;
        } else {
                cfg_size = 1;
                lfa_mask = 0xffff;
        }

        /* Compare Duplex */
        saved_val = REG_RD(sc, params->lfa_base +
                           offsetof(struct shmem_lfa, req_duplex));
        req_val = params->req_duplex[0] | (params->req_duplex[1] << 16);
        if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
                PMD_DRV_LOG(INFO, "Duplex mismatch %x vs. %x",
                            (saved_val & lfa_mask), (req_val & lfa_mask));
                return LFA_DUPLEX_MISMATCH;
        }
        /* Compare Flow Control */
        saved_val = REG_RD(sc, params->lfa_base +
                           offsetof(struct shmem_lfa, req_flow_ctrl));
        req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16);
        if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
                PMD_DRV_LOG(DEBUG, "Flow control mismatch %x vs. %x",
                            (saved_val & lfa_mask), (req_val & lfa_mask));
                return LFA_FLOW_CTRL_MISMATCH;
        }
        /* Compare Link Speed */
        saved_val = REG_RD(sc, params->lfa_base +
                           offsetof(struct shmem_lfa, req_line_speed));
        req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16);
        if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
                PMD_DRV_LOG(DEBUG, "Link speed mismatch %x vs. %x",
                            (saved_val & lfa_mask), (req_val & lfa_mask));
                return LFA_LINK_SPEED_MISMATCH;
        }

        for (cfg_idx = 0; cfg_idx < cfg_size; cfg_idx++) {
                cur_speed_cap_mask = REG_RD(sc, params->lfa_base +
                                            offsetof(struct shmem_lfa,
                                                     speed_cap_mask[cfg_idx]));

                if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) {
                        PMD_DRV_LOG(DEBUG, "Speed Cap mismatch %x vs. %x",
                                    cur_speed_cap_mask,
                                    params->speed_cap_mask[cfg_idx]);
                        return LFA_SPEED_CAP_MISMATCH;
                }
        }

        cur_req_fc_auto_adv =
            REG_RD(sc, params->lfa_base +
                   offsetof(struct shmem_lfa, additional_config)) &
            REQ_FC_AUTO_ADV_MASK;

        if ((uint16_t) cur_req_fc_auto_adv != params->req_fc_auto_adv) {
                PMD_DRV_LOG(DEBUG, "Flow Ctrl AN mismatch %x vs. %x",
                            cur_req_fc_auto_adv, params->req_fc_auto_adv);
                return LFA_FLOW_CTRL_MISMATCH;
        }

        eee_status = REG_RD(sc, params->shmem2_base +
                            offsetof(struct shmem2_region,
                                     eee_status[params->port]));

        if (((eee_status & SHMEM_EEE_LPI_REQUESTED_BIT) ^
             (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)) ||
            ((eee_status & SHMEM_EEE_REQUESTED_BIT) ^
             (params->eee_mode & ELINK_EEE_MODE_ADV_LPI))) {
                PMD_DRV_LOG(DEBUG, "EEE mismatch %x vs. %x", params->eee_mode,
                            eee_status);
                return LFA_EEE_MISMATCH;
        }

        /* LFA conditions are met */
        return 0;
}

/******************************************************************/
/*                      EPIO/GPIO section                         */
/******************************************************************/
static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin,
                           uint32_t * en)
{
        uint32_t epio_mask, gp_oenable;
        *en = 0;
        /* Sanity check */
        if (epio_pin > 31) {
                PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to get", epio_pin);
                return;
        }

        epio_mask = 1 << epio_pin;
        /* Set this EPIO to output */
        gp_oenable = REG_RD(sc, MCP_REG_MCPR_GP_OENABLE);
        REG_WR(sc, MCP_REG_MCPR_GP_OENABLE, gp_oenable & ~epio_mask);

        *en = (REG_RD(sc, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin;
}

static void elink_set_epio(struct bnx2x_softc *sc, uint32_t epio_pin, uint32_t en)
{
        uint32_t epio_mask, gp_output, gp_oenable;

        /* Sanity check */
        if (epio_pin > 31) {
                PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to set", epio_pin);
                return;
        }
        PMD_DRV_LOG(DEBUG, "Setting EPIO pin %d to %d", epio_pin, en);
        epio_mask = 1 << epio_pin;
        /* Set this EPIO to output */
        gp_output = REG_RD(sc, MCP_REG_MCPR_GP_OUTPUTS);
        if (en)
                gp_output |= epio_mask;
        else
                gp_output &= ~epio_mask;

        REG_WR(sc, MCP_REG_MCPR_GP_OUTPUTS, gp_output);

        /* Set the value for this EPIO */
        gp_oenable = REG_RD(sc, MCP_REG_MCPR_GP_OENABLE);
        REG_WR(sc, MCP_REG_MCPR_GP_OENABLE, gp_oenable | epio_mask);
}

static void elink_set_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg,
                              uint32_t val)
{
        if (pin_cfg == PIN_CFG_NA)
                return;
        if (pin_cfg >= PIN_CFG_EPIO0) {
                elink_set_epio(sc, pin_cfg - PIN_CFG_EPIO0, val);
        } else {
                uint8_t gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3;
                uint8_t gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2;
                elink_cb_gpio_write(sc, gpio_num, (uint8_t) val, gpio_port);
        }
}

static uint32_t elink_get_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg,
                                  uint32_t * val)
{
        if (pin_cfg == PIN_CFG_NA)
                return ELINK_STATUS_ERROR;
        if (pin_cfg >= PIN_CFG_EPIO0) {
                elink_get_epio(sc, pin_cfg - PIN_CFG_EPIO0, val);
        } else {
                uint8_t gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3;
                uint8_t gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2;
                *val = elink_cb_gpio_read(sc, gpio_num, gpio_port);
        }
        return ELINK_STATUS_OK;

}

/******************************************************************/
/*                      PFC section                               */
/******************************************************************/
static void elink_update_pfc_xmac(struct elink_params *params,
                                  struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t xmac_base;
        uint32_t pause_val, pfc0_val, pfc1_val;

        /* XMAC base adrr */
        xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;

        /* Initialize pause and pfc registers */
        pause_val = 0x18000;
        pfc0_val = 0xFFFF8000;
        pfc1_val = 0x2;

        /* No PFC support */
        if (!(params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)) {

                /* RX flow control - Process pause frame in receive direction
                 */
                if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
                        pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN;

                /* TX flow control - Send pause packet when buffer is full */
                if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
                        pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN;
        } else {                /* PFC support */
                pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN |
                    XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN |
                    XMAC_PFC_CTRL_HI_REG_RX_PFC_EN |
                    XMAC_PFC_CTRL_HI_REG_TX_PFC_EN |
                    XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON;
                /* Write pause and PFC registers */
                REG_WR(sc, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val);
                REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val);
                REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val);
                pfc1_val &= ~XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON;

        }

        /* Write pause and PFC registers */
        REG_WR(sc, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val);
        REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val);
        REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val);

        /* Set MAC address for source TX Pause/PFC frames */
        REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_LO,
               ((params->mac_addr[2] << 24) |
                (params->mac_addr[3] << 16) |
                (params->mac_addr[4] << 8) | (params->mac_addr[5])));
        REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_HI,
               ((params->mac_addr[0] << 8) | (params->mac_addr[1])));

        DELAY(30);
}

/******************************************************************/
/*                      MAC/PBF section                           */
/******************************************************************/
static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base)
{
        uint32_t new_mode, cur_mode;
        uint32_t clc_cnt;
        /* Set clause 45 mode, slow down the MDIO clock to 2.5MHz
         * (a value of 49==0x31) and make sure that the AUTO poll is off
         */
        cur_mode = REG_RD(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE);

        if (USES_WARPCORE(sc))
                clc_cnt = 74L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT;
        else
                clc_cnt = 49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT;

        if (((cur_mode & EMAC_MDIO_MODE_CLOCK_CNT) == clc_cnt) &&
            (cur_mode & (EMAC_MDIO_MODE_CLAUSE_45)))
                return;

        new_mode = cur_mode &
            ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
        new_mode |= clc_cnt;
        new_mode |= (EMAC_MDIO_MODE_CLAUSE_45);

        PMD_DRV_LOG(DEBUG, "Changing emac_mode from 0x%x to 0x%x",
                    cur_mode, new_mode);
        REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode);
        DELAY(40);
}

static void elink_set_mdio_emac_per_phy(struct bnx2x_softc *sc,
                                        struct elink_params *params)
{
        uint8_t phy_index;
        /* Set mdio clock per phy */
        for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
             phy_index++)
                elink_set_mdio_clk(sc, params->phy[phy_index].mdio_ctrl);
}

static uint8_t elink_is_4_port_mode(struct bnx2x_softc *sc)
{
        uint32_t port4mode_ovwr_val;
        /* Check 4-port override enabled */
        port4mode_ovwr_val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
        if (port4mode_ovwr_val & (1 << 0)) {
                /* Return 4-port mode override value */
                return (port4mode_ovwr_val & (1 << 1)) == (1 << 1);
        }
        /* Return 4-port mode from input pin */
        return (uint8_t) REG_RD(sc, MISC_REG_PORT4MODE_EN);
}

static void elink_emac_init(struct elink_params *params)
{
        /* reset and unreset the emac core */
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
        uint32_t val;
        uint16_t timeout;

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
        DELAY(5);
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));

        /* init emac - use read-modify-write */
        /* self clear reset */
        val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE,
                           (val | EMAC_MODE_RESET));

        timeout = 200;
        do {
                val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
                PMD_DRV_LOG(DEBUG, "EMAC reset reg is %u", val);
                if (!timeout) {
                        PMD_DRV_LOG(DEBUG, "EMAC timeout!");
                        return;
                }
                timeout--;
        } while (val & EMAC_MODE_RESET);

        elink_set_mdio_emac_per_phy(sc, params);
        /* Set mac address */
        val = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH, val);

        val = ((params->mac_addr[2] << 24) |
               (params->mac_addr[3] << 16) |
               (params->mac_addr[4] << 8) | params->mac_addr[5]);
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH + 4, val);
}

static void elink_set_xumac_nig(struct elink_params *params,
                                uint16_t tx_pause_en, uint8_t enable)
{
        struct bnx2x_softc *sc = params->sc;

        REG_WR(sc, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN,
               enable);
        REG_WR(sc, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN,
               enable);
        REG_WR(sc, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN :
               NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en);
}

static void elink_set_umac_rxtx(struct elink_params *params, uint8_t en)
{
        uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
        uint32_t val;
        struct bnx2x_softc *sc = params->sc;
        if (!(REG_RD(sc, MISC_REG_RESET_REG_2) &
              (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)))
                return;
        val = REG_RD(sc, umac_base + UMAC_REG_COMMAND_CONFIG);
        if (en)
                val |= (UMAC_COMMAND_CONFIG_REG_TX_ENA |
                        UMAC_COMMAND_CONFIG_REG_RX_ENA);
        else
                val &= ~(UMAC_COMMAND_CONFIG_REG_TX_ENA |
                         UMAC_COMMAND_CONFIG_REG_RX_ENA);
        /* Disable RX and TX */
        REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val);
}

static void elink_umac_enable(struct elink_params *params,
                              struct elink_vars *vars, uint8_t lb)
{
        uint32_t val;
        uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
        struct bnx2x_softc *sc = params->sc;
        /* Reset UMAC */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));
        DELAY(1000 * 1);

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));

        PMD_DRV_LOG(DEBUG, "enabling UMAC");

        /* This register opens the gate for the UMAC despite its name */
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1);

        val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN |
            UMAC_COMMAND_CONFIG_REG_PAD_EN |
            UMAC_COMMAND_CONFIG_REG_SW_RESET |
            UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK;
        switch (vars->line_speed) {
        case ELINK_SPEED_10:
                val |= (0 << 2);
                break;
        case ELINK_SPEED_100:
                val |= (1 << 2);
                break;
        case ELINK_SPEED_1000:
                val |= (2 << 2);
                break;
        case ELINK_SPEED_2500:
                val |= (3 << 2);
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Invalid speed for UMAC %d",
                            vars->line_speed);
                break;
        }
        if (!(vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE;

        if (!(vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
                val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE;

        if (vars->duplex == DUPLEX_HALF)
                val |= UMAC_COMMAND_CONFIG_REG_HD_ENA;

        REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val);
        DELAY(50);

        /* Configure UMAC for EEE */
        if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
                PMD_DRV_LOG(DEBUG, "configured UMAC for EEE");
                REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL,
                       UMAC_UMAC_EEE_CTRL_REG_EEE_EN);
                REG_WR(sc, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11);
        } else {
                REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL, 0x0);
        }

        /* Set MAC address for source TX Pause/PFC frames (under SW reset) */
        REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR0,
               ((params->mac_addr[2] << 24) |
                (params->mac_addr[3] << 16) |
                (params->mac_addr[4] << 8) | (params->mac_addr[5])));
        REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR1,
               ((params->mac_addr[0] << 8) | (params->mac_addr[1])));

        /* Enable RX and TX */
        val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN;
        val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | UMAC_COMMAND_CONFIG_REG_RX_ENA;
        REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val);
        DELAY(50);

        /* Remove SW Reset */
        val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET;

        /* Check loopback mode */
        if (lb)
                val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA;
        REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val);

        /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame
         * length used by the MAC receive logic to check frames.
         */
        REG_WR(sc, umac_base + UMAC_REG_MAXFR, 0x2710);
        elink_set_xumac_nig(params,
                            ((vars->flow_ctrl & ELINK_FLOW_CTRL_TX) != 0), 1);
        vars->mac_type = ELINK_MAC_TYPE_UMAC;

}

/* Define the XMAC mode */
static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t is_port4mode = elink_is_4_port_mode(sc);

        /* In 4-port mode, need to set the mode only once, so if XMAC is
         * already out of reset, it means the mode has already been set,
         * and it must not* reset the XMAC again, since it controls both
         * ports of the path
         */

        if (((CHIP_NUM(sc) == CHIP_NUM_57840_4_10) ||
             (CHIP_NUM(sc) == CHIP_NUM_57840_2_20) ||
             (CHIP_NUM(sc) == CHIP_NUM_57840_OBS)) &&
            is_port4mode &&
            (REG_RD(sc, MISC_REG_RESET_REG_2) &
             MISC_REGISTERS_RESET_REG_2_XMAC)) {
                PMD_DRV_LOG(DEBUG, "XMAC already out of reset in 4-port mode");
                return;
        }

        /* Hard reset */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               MISC_REGISTERS_RESET_REG_2_XMAC);
        DELAY(1000 * 1);

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               MISC_REGISTERS_RESET_REG_2_XMAC);
        if (is_port4mode) {
                PMD_DRV_LOG(DEBUG, "Init XMAC to 2 ports x 10G per path");

                /* Set the number of ports on the system side to up to 2 */
                REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 1);

                /* Set the number of ports on the Warp Core to 10G */
                REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3);
        } else {
                /* Set the number of ports on the system side to 1 */
                REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 0);
                if (max_speed == ELINK_SPEED_10000) {
                        PMD_DRV_LOG(DEBUG,
                                    "Init XMAC to 10G x 1 port per path");
                        /* Set the number of ports on the Warp Core to 10G */
                        REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3);
                } else {
                        PMD_DRV_LOG(DEBUG,
                                    "Init XMAC to 20G x 2 ports per path");
                        /* Set the number of ports on the Warp Core to 20G */
                        REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 1);
                }
        }
        /* Soft reset */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               MISC_REGISTERS_RESET_REG_2_XMAC_SOFT);
        DELAY(1000 * 1);

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               MISC_REGISTERS_RESET_REG_2_XMAC_SOFT);

}

static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en)
{
        uint8_t port = params->port;
        struct bnx2x_softc *sc = params->sc;
        uint32_t pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
        uint32_t val;

        if (REG_RD(sc, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC) {
                /* Send an indication to change the state in the NIG back to XON
                 * Clearing this bit enables the next set of this bit to get
                 * rising edge
                 */
                pfc_ctrl = REG_RD(sc, xmac_base + XMAC_REG_PFC_CTRL_HI);
                REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI,
                       (pfc_ctrl & ~(1 << 1)));
                REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI,
                       (pfc_ctrl | (1 << 1)));
                PMD_DRV_LOG(DEBUG, "Disable XMAC on port %x", port);
                val = REG_RD(sc, xmac_base + XMAC_REG_CTRL);
                if (en)
                        val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN);
                else
                        val &= ~(XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN);
                REG_WR(sc, xmac_base + XMAC_REG_CTRL, val);
        }
}

static elink_status_t elink_xmac_enable(struct elink_params *params,
                                        struct elink_vars *vars, uint8_t lb)
{
        uint32_t val, xmac_base;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "enabling XMAC");

        xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;

        elink_xmac_init(params, vars->line_speed);

        /* This register determines on which events the MAC will assert
         * error on the i/f to the NIG along w/ EOP.
         */

        /* This register tells the NIG whether to send traffic to UMAC
         * or XMAC
         */
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 0);

        /* When XMAC is in XLGMII mode, disable sending idles for fault
         * detection.
         */
        if (!(params->phy[ELINK_INT_PHY].flags & ELINK_FLAGS_TX_ERROR_CHECK)) {
                REG_WR(sc, xmac_base + XMAC_REG_RX_LSS_CTRL,
                       (XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE |
                        XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE));
                REG_WR(sc, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
                REG_WR(sc, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
                       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
                       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
        }
        /* Set Max packet size */
        REG_WR(sc, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710);

        /* CRC append for Tx packets */
        REG_WR(sc, xmac_base + XMAC_REG_TX_CTRL, 0xC800);

        /* update PFC */
        elink_update_pfc_xmac(params, vars);

        if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
                PMD_DRV_LOG(DEBUG, "Setting XMAC for EEE");
                REG_WR(sc, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008);
                REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x1);
        } else {
                REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x0);
        }

        /* Enable TX and RX */
        val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN;

        /* Set MAC in XLGMII mode for dual-mode */
        if ((vars->line_speed == ELINK_SPEED_20000) &&
            (params->phy[ELINK_INT_PHY].supported &
             ELINK_SUPPORTED_20000baseKR2_Full))
                val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB;

        /* Check loopback mode */
        if (lb)
                val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
        REG_WR(sc, xmac_base + XMAC_REG_CTRL, val);
        elink_set_xumac_nig(params,
                            ((vars->flow_ctrl & ELINK_FLOW_CTRL_TX) != 0), 1);

        vars->mac_type = ELINK_MAC_TYPE_XMAC;

        return ELINK_STATUS_OK;
}

static elink_status_t elink_emac_enable(struct elink_params *params,
                                        struct elink_vars *vars, uint8_t lb)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "enabling EMAC");

        /* Disable BMAC */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));

        /* enable emac and not bmac */
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 1);

#ifdef ELINK_INCLUDE_EMUL
        /* for paladium */
        if (CHIP_REV_IS_EMUL(sc)) {
                /* Use lane 1 (of lanes 0-3) */
                REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
                REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
        }
        /* for fpga */
        else
#endif
#ifdef ELINK_INCLUDE_FPGA
        if (CHIP_REV_IS_FPGA(sc)) {
                /* Use lane 1 (of lanes 0-3) */
                PMD_DRV_LOG(DEBUG, "elink_emac_enable: Setting FPGA");

                REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1);
                REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
        } else
#endif
                /* ASIC */
        if (vars->phy_flags & PHY_XGXS_FLAG) {
                uint32_t ser_lane = ((params->lane_config &
                                      PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
                                     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);

                PMD_DRV_LOG(DEBUG, "XGXS");
                /* select the master lanes (out of 0-3) */
                REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, ser_lane);
                /* select XGXS */
                REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);

        } else {                /* SerDes */
                PMD_DRV_LOG(DEBUG, "SerDes");
                /* select SerDes */
                REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
        }

        elink_bits_en(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
                      EMAC_RX_MODE_RESET);
        elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
                      EMAC_TX_MODE_RESET);

#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
        if (CHIP_REV_IS_SLOW(sc)) {
                /* config GMII mode */
                val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
                elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE,
                                   (val | EMAC_MODE_PORT_GMII));
        } else {                /* ASIC */
#endif
                /* pause enable/disable */
                elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE,
                               EMAC_RX_MODE_FLOW_EN);

                elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
                               (EMAC_TX_MODE_EXT_PAUSE_EN |
                                EMAC_TX_MODE_FLOW_EN));
                if (!(params->feature_config_flags &
                      ELINK_FEATURE_CONFIG_PFC_ENABLED)) {
                        if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
                                elink_bits_en(sc, emac_base +
                                              EMAC_REG_EMAC_RX_MODE,
                                              EMAC_RX_MODE_FLOW_EN);

                        if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
                                elink_bits_en(sc, emac_base +
                                              EMAC_REG_EMAC_TX_MODE,
                                              (EMAC_TX_MODE_EXT_PAUSE_EN |
                                               EMAC_TX_MODE_FLOW_EN));
                } else
                        elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE,
                                      EMAC_TX_MODE_FLOW_EN);
#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
        }
#endif

        /* KEEP_VLAN_TAG, promiscuous */
        val = REG_RD(sc, emac_base + EMAC_REG_EMAC_RX_MODE);
        val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;

        /* Setting this bit causes MAC control frames (except for pause
         * frames) to be passed on for processing. This setting has no
         * affect on the operation of the pause frames. This bit effects
         * all packets regardless of RX Parser packet sorting logic.
         * Turn the PFC off to make sure we are in Xon state before
         * enabling it.
         */
        elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, 0);
        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
                PMD_DRV_LOG(DEBUG, "PFC is enabled");
                /* Enable PFC again */
                elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE,
                                   EMAC_REG_RX_PFC_MODE_RX_EN |
                                   EMAC_REG_RX_PFC_MODE_TX_EN |
                                   EMAC_REG_RX_PFC_MODE_PRIORITIES);

                elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_PARAM,
                                   ((0x0101 <<
                                     EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) |
                                    (0x00ff <<
                                     EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT)));
                val |= EMAC_RX_MODE_KEEP_MAC_CONTROL;
        }
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MODE, val);

        /* Set Loopback */
        val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
        if (lb)
                val |= 0x810;
        else
                val &= ~0x810;
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE, val);

        /* Enable emac */
        REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 1);

        /* Enable emac for jumbo packets */
        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MTU_SIZE,
                           (EMAC_RX_MTU_SIZE_JUMBO_ENA |
                            (ELINK_ETH_MAX_JUMBO_PACKET_SIZE +
                             ELINK_ETH_OVREHEAD)));

        /* Strip CRC */
        REG_WR(sc, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port * 4, 0x1);

        /* Disable the NIG in/out to the bmac */
        REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0x0);
        REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + port * 4, 0x0);
        REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0x0);

        /* Enable the NIG in/out to the emac */
        REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0x1);
        val = 0;
        if ((params->feature_config_flags &
             ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
            (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                val = 1;

        REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, val);
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x1);

#ifdef ELINK_INCLUDE_EMUL
        if (CHIP_REV_IS_EMUL(sc)) {
                /* Take the BigMac out of reset */
                REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
                       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));

                /* Enable access for bmac registers */
                REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1);
        } else
#endif
                REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x0);

        vars->mac_type = ELINK_MAC_TYPE_EMAC;
        return ELINK_STATUS_OK;
}

static void elink_update_pfc_bmac1(struct elink_params *params,
                                   struct elink_vars *vars)
{
        uint32_t wb_data[2];
        struct bnx2x_softc *sc = params->sc;
        uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
            NIG_REG_INGRESS_BMAC0_MEM;

        uint32_t val = 0x14;
        if ((!(params->feature_config_flags &
               ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
            (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
                /* Enable BigMAC to react on received Pause packets */
                val |= (1 << 5);
        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_data, 2);

        /* TX control */
        val = 0xc0;
        if (!(params->feature_config_flags &
              ELINK_FEATURE_CONFIG_PFC_ENABLED) &&
            (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                val |= 0x800000;
        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_data, 2);
}

static void elink_update_pfc_bmac2(struct elink_params *params,
                                   struct elink_vars *vars, uint8_t is_lb)
{
        /* Set rx control: Strip CRC and enable BigMAC to relay
         * control packets to the system as well
         */
        uint32_t wb_data[2];
        struct bnx2x_softc *sc = params->sc;
        uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
            NIG_REG_INGRESS_BMAC0_MEM;
        uint32_t val = 0x14;

        if ((!(params->feature_config_flags &
               ELINK_FEATURE_CONFIG_PFC_ENABLED)) &&
            (vars->flow_ctrl & ELINK_FLOW_CTRL_RX))
                /* Enable BigMAC to react on received Pause packets */
                val |= (1 << 5);
        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_CONTROL, wb_data, 2);
        DELAY(30);

        /* Tx control */
        val = 0xc0;
        if (!(params->feature_config_flags &
              ELINK_FEATURE_CONFIG_PFC_ENABLED) &&
            (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                val |= 0x800000;
        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2);

        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
                PMD_DRV_LOG(DEBUG, "PFC is enabled");
                /* Enable PFC RX & TX & STATS and set 8 COS  */
                wb_data[0] = 0x0;
                wb_data[0] |= (1 << 0); /* RX */
                wb_data[0] |= (1 << 1); /* TX */
                wb_data[0] |= (1 << 2); /* Force initial Xon */
                wb_data[0] |= (1 << 3); /* 8 cos */
                wb_data[0] |= (1 << 5); /* STATS */
                wb_data[1] = 0;
                REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL,
                            wb_data, 2);
                /* Clear the force Xon */
                wb_data[0] &= ~(1 << 2);
        } else {
                PMD_DRV_LOG(DEBUG, "PFC is disabled");
                /* Disable PFC RX & TX & STATS and set 8 COS */
                wb_data[0] = 0x8;
                wb_data[1] = 0;
        }

        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2);

        /* Set Time (based unit is 512 bit time) between automatic
         * re-sending of PP packets amd enable automatic re-send of
         * Per-Priroity Packet as long as pp_gen is asserted and
         * pp_disable is low.
         */
        val = 0x8000;
        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
                val |= (1 << 16);       /* enable automatic re-send */

        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_PAUSE_CONTROL,
                    wb_data, 2);

        /* mac control */
        val = 0x3;              /* Enable RX and TX */
        if (is_lb) {
                val |= 0x4;     /* Local loopback */
                PMD_DRV_LOG(DEBUG, "enable bmac loopback");
        }
        /* When PFC enabled, Pass pause frames towards the NIG. */
        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
                val |= ((1 << 6) | (1 << 5));

        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2);
}

/******************************************************************************
* Description:
*  This function is needed because NIG ARB_CREDIT_WEIGHT_X are
*  not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable.
******************************************************************************/
static elink_status_t elink_pfc_nig_rx_priority_mask(struct bnx2x_softc *sc,
                                                     uint8_t cos_entry,
                                                     uint32_t priority_mask,
                                                     uint8_t port)
{
        uint32_t nig_reg_rx_priority_mask_add = 0;

        switch (cos_entry) {
        case 0:
                nig_reg_rx_priority_mask_add = (port) ?
                    NIG_REG_P1_RX_COS0_PRIORITY_MASK :
                    NIG_REG_P0_RX_COS0_PRIORITY_MASK;
                break;
        case 1:
                nig_reg_rx_priority_mask_add = (port) ?
                    NIG_REG_P1_RX_COS1_PRIORITY_MASK :
                    NIG_REG_P0_RX_COS1_PRIORITY_MASK;
                break;
        case 2:
                nig_reg_rx_priority_mask_add = (port) ?
                    NIG_REG_P1_RX_COS2_PRIORITY_MASK :
                    NIG_REG_P0_RX_COS2_PRIORITY_MASK;
                break;
        case 3:
                if (port)
                        return ELINK_STATUS_ERROR;
                nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK;
                break;
        case 4:
                if (port)
                        return ELINK_STATUS_ERROR;
                nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK;
                break;
        case 5:
                if (port)
                        return ELINK_STATUS_ERROR;
                nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK;
                break;
        }

        REG_WR(sc, nig_reg_rx_priority_mask_add, priority_mask);

        return ELINK_STATUS_OK;
}

static void elink_update_mng(struct elink_params *params, uint32_t link_status)
{
        struct bnx2x_softc *sc = params->sc;

        REG_WR(sc, params->shmem_base +
               offsetof(struct shmem_region,
                        port_mb[params->port].link_status), link_status);
}

static void elink_update_link_attr(struct elink_params *params,
                                   uint32_t link_attr)
{
        struct bnx2x_softc *sc = params->sc;

        if (SHMEM2_HAS(sc, link_attr_sync))
                REG_WR(sc, params->shmem2_base +
                       offsetof(struct shmem2_region,
                                link_attr_sync[params->port]), link_attr);
}

static void elink_update_pfc_nig(struct elink_params *params,
                                 struct elink_nig_brb_pfc_port_params
                                 *nig_params)
{
        uint32_t xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en =
            0;
        uint32_t llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0;
        uint32_t pkt_priority_to_cos = 0;
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;

        int set_pfc = params->feature_config_flags &
            ELINK_FEATURE_CONFIG_PFC_ENABLED;
        PMD_DRV_LOG(DEBUG, "updating pfc nig parameters");

        /* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
         * MAC control frames (that are not pause packets)
         * will be forwarded to the XCM.
         */
        xcm_mask = REG_RD(sc, port ? NIG_REG_LLH1_XCM_MASK :
                          NIG_REG_LLH0_XCM_MASK);
        /* NIG params will override non PFC params, since it's possible to
         * do transition from PFC to SAFC
         */
        if (set_pfc) {
                pause_enable = 0;
                llfc_out_en = 0;
                llfc_enable = 0;
                if (CHIP_IS_E3(sc))
                        ppp_enable = 0;
                else
                        ppp_enable = 1;
                xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
                              NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
                xcm_out_en = 0;
                hwpfc_enable = 1;
        } else {
                if (nig_params) {
                        llfc_out_en = nig_params->llfc_out_en;
                        llfc_enable = nig_params->llfc_enable;
                        pause_enable = nig_params->pause_enable;
                } else          /* Default non PFC mode - PAUSE */
                        pause_enable = 1;

                xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
                             NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
                xcm_out_en = 1;
        }

        if (CHIP_IS_E3(sc))
                REG_WR(sc, port ? NIG_REG_BRB1_PAUSE_IN_EN :
                       NIG_REG_BRB0_PAUSE_IN_EN, pause_enable);
        REG_WR(sc, port ? NIG_REG_LLFC_OUT_EN_1 :
               NIG_REG_LLFC_OUT_EN_0, llfc_out_en);
        REG_WR(sc, port ? NIG_REG_LLFC_ENABLE_1 :
               NIG_REG_LLFC_ENABLE_0, llfc_enable);
        REG_WR(sc, port ? NIG_REG_PAUSE_ENABLE_1 :
               NIG_REG_PAUSE_ENABLE_0, pause_enable);

        REG_WR(sc, port ? NIG_REG_PPP_ENABLE_1 :
               NIG_REG_PPP_ENABLE_0, ppp_enable);

        REG_WR(sc, port ? NIG_REG_LLH1_XCM_MASK :
               NIG_REG_LLH0_XCM_MASK, xcm_mask);

        REG_WR(sc, port ? NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 :
               NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7);

        /* Output enable for RX_XCM # IF */
        REG_WR(sc, port ? NIG_REG_XCM1_OUT_EN :
               NIG_REG_XCM0_OUT_EN, xcm_out_en);

        /* HW PFC TX enable */
        REG_WR(sc, port ? NIG_REG_P1_HWPFC_ENABLE :
               NIG_REG_P0_HWPFC_ENABLE, hwpfc_enable);

        if (nig_params) {
                uint8_t i = 0;
                pkt_priority_to_cos = nig_params->pkt_priority_to_cos;

                for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++)
                        elink_pfc_nig_rx_priority_mask(sc, i,
                                                       nig_params->
                                                       rx_cos_priority_mask[i],
                                                       port);

                REG_WR(sc, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 :
                       NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0,
                       nig_params->llfc_high_priority_classes);

                REG_WR(sc, port ? NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 :
                       NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0,
                       nig_params->llfc_low_priority_classes);
        }
        REG_WR(sc, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS :
               NIG_REG_P0_PKT_PRIORITY_TO_COS, pkt_priority_to_cos);
}

elink_status_t elink_update_pfc(struct elink_params *params,
                                struct elink_vars *vars,
                                struct elink_nig_brb_pfc_port_params
                                *pfc_params)
{
        /* The PFC and pause are orthogonal to one another, meaning when
         * PFC is enabled, the pause are disabled, and when PFC is
         * disabled, pause are set according to the pause result.
         */
        uint32_t val;
        struct bnx2x_softc *sc = params->sc;
        elink_status_t elink_status = ELINK_STATUS_OK;
        uint8_t bmac_loopback = (params->loopback_mode == ELINK_LOOPBACK_BMAC);

        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
                vars->link_status |= LINK_STATUS_PFC_ENABLED;
        else
                vars->link_status &= ~LINK_STATUS_PFC_ENABLED;

        elink_update_mng(params, vars->link_status);

        /* Update NIG params */
        elink_update_pfc_nig(params, pfc_params);

        if (!vars->link_up)
                return elink_status;

        PMD_DRV_LOG(DEBUG, "About to update PFC in BMAC");

        if (CHIP_IS_E3(sc)) {
                if (vars->mac_type == ELINK_MAC_TYPE_XMAC)
                        elink_update_pfc_xmac(params, vars);
        } else {
                val = REG_RD(sc, MISC_REG_RESET_REG_2);
                if ((val &
                     (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
                    == 0) {
                        PMD_DRV_LOG(DEBUG, "About to update PFC in EMAC");
                        elink_emac_enable(params, vars, 0);
                        return elink_status;
                }
                if (CHIP_IS_E2(sc))
                        elink_update_pfc_bmac2(params, vars, bmac_loopback);
                else
                        elink_update_pfc_bmac1(params, vars);

                val = 0;
                if ((params->feature_config_flags &
                     ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
                    (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                        val = 1;
                REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port * 4, val);
        }
        return elink_status;
}

static elink_status_t elink_bmac1_enable(struct elink_params *params,
                                         struct elink_vars *vars, uint8_t is_lb)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
            NIG_REG_INGRESS_BMAC0_MEM;
        uint32_t wb_data[2];
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "Enabling BigMAC1");

        /* XGXS control */
        wb_data[0] = 0x3c;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
                    wb_data, 2);

        /* TX MAC SA */
        wb_data[0] = ((params->mac_addr[2] << 24) |
                      (params->mac_addr[3] << 16) |
                      (params->mac_addr[4] << 8) | params->mac_addr[5]);
        wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, wb_data, 2);

        /* MAC control */
        val = 0x3;
        if (is_lb) {
                val |= 0x4;
                PMD_DRV_LOG(DEBUG, "enable bmac loopback");
        }
        wb_data[0] = val;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2);

        /* Set rx mtu */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_data, 2);

        elink_update_pfc_bmac1(params, vars);

        /* Set tx mtu */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_data, 2);

        /* Set cnt max size */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, wb_data, 2);

        /* Configure SAFC */
        wb_data[0] = 0x1000200;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
                    wb_data, 2);
#ifdef ELINK_INCLUDE_EMUL
        /* Fix for emulation */
        if (CHIP_REV_IS_EMUL(sc)) {
                wb_data[0] = 0xf000;
                wb_data[1] = 0;
                REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
                            wb_data, 2);
        }
#endif

        return ELINK_STATUS_OK;
}

static elink_status_t elink_bmac2_enable(struct elink_params *params,
                                         struct elink_vars *vars, uint8_t is_lb)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
            NIG_REG_INGRESS_BMAC0_MEM;
        uint32_t wb_data[2];

        PMD_DRV_LOG(DEBUG, "Enabling BigMAC2");

        wb_data[0] = 0;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2);
        DELAY(30);

        /* XGXS control: Reset phy HW, MDIO registers, PHY PLL and BMAC */
        wb_data[0] = 0x3c;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_XGXS_CONTROL,
                    wb_data, 2);

        DELAY(30);

        /* TX MAC SA */
        wb_data[0] = ((params->mac_addr[2] << 24) |
                      (params->mac_addr[3] << 16) |
                      (params->mac_addr[4] << 8) | params->mac_addr[5]);
        wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]);
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_SOURCE_ADDR,
                    wb_data, 2);

        DELAY(30);

        /* Configure SAFC */
        wb_data[0] = 0x1000200;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS,
                    wb_data, 2);
        DELAY(30);

        /* Set RX MTU */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_MAX_SIZE, wb_data, 2);
        DELAY(30);

        /* Set TX MTU */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_MAX_SIZE, wb_data, 2);
        DELAY(30);
        /* Set cnt max size */
        wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD - 2;
        wb_data[1] = 0;
        REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE, wb_data, 2);
        DELAY(30);
        elink_update_pfc_bmac2(params, vars, is_lb);

        return ELINK_STATUS_OK;
}

static elink_status_t elink_bmac_enable(struct elink_params *params,
                                        struct elink_vars *vars,
                                        uint8_t is_lb, uint8_t reset_bmac)
{
        elink_status_t rc = ELINK_STATUS_OK;
        uint8_t port = params->port;
        struct bnx2x_softc *sc = params->sc;
        uint32_t val;
        /* Reset and unreset the BigMac */
        if (reset_bmac) {
                REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
                DELAY(1000 * 1);
        }

        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));

        /* Enable access for bmac registers */
        REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1);

        /* Enable BMAC according to BMAC type */
        if (CHIP_IS_E2(sc))
                rc = elink_bmac2_enable(params, vars, is_lb);
        else
                rc = elink_bmac1_enable(params, vars, is_lb);
        REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0x1);
        REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 0x0);
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 0x0);
        val = 0;
        if ((params->feature_config_flags &
             ELINK_FEATURE_CONFIG_PFC_ENABLED) ||
            (vars->flow_ctrl & ELINK_FLOW_CTRL_TX))
                val = 1;
        REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + port * 4, val);
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x0);
        REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0x0);
        REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, 0x0);
        REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0x1);
        REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0x1);

        vars->mac_type = ELINK_MAC_TYPE_BMAC;
        return rc;
}

static void elink_set_bmac_rx(struct bnx2x_softc *sc, uint8_t port, uint8_t en)
{
        uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
            NIG_REG_INGRESS_BMAC0_MEM;
        uint32_t wb_data[2];
        uint32_t nig_bmac_enable =
            REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);

        if (CHIP_IS_E2(sc))
                bmac_addr += BIGMAC2_REGISTER_BMAC_CONTROL;
        else
                bmac_addr += BIGMAC_REGISTER_BMAC_CONTROL;
        /* Only if the bmac is out of reset */
        if (REG_RD(sc, MISC_REG_RESET_REG_2) &
            (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && nig_bmac_enable) {
                /* Clear Rx Enable bit in BMAC_CONTROL register */
                REG_RD_DMAE(sc, bmac_addr, wb_data, 2);
                if (en)
                        wb_data[0] |= ELINK_BMAC_CONTROL_RX_ENABLE;
                else
                        wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
                REG_WR_DMAE(sc, bmac_addr, wb_data, 2);
                DELAY(1000 * 1);
        }
}

static elink_status_t elink_pbf_update(struct elink_params *params,
                                       uint32_t flow_ctrl, uint32_t line_speed)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t init_crd, crd;
        uint32_t count = 1000;

        /* Disable port */
        REG_WR(sc, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port * 4, 0x1);

        /* Wait for init credit */
        init_crd = REG_RD(sc, PBF_REG_P0_INIT_CRD + port * 4);
        crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
        PMD_DRV_LOG(DEBUG, "init_crd 0x%x  crd 0x%x", init_crd, crd);

        while ((init_crd != crd) && count) {
                DELAY(1000 * 5);
                crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
                count--;
        }
        crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
        if (init_crd != crd) {
                PMD_DRV_LOG(DEBUG, "BUG! init_crd 0x%x != crd 0x%x",
                            init_crd, crd);
                return ELINK_STATUS_ERROR;
        }

        if (flow_ctrl & ELINK_FLOW_CTRL_RX ||
            line_speed == ELINK_SPEED_10 ||
            line_speed == ELINK_SPEED_100 ||
            line_speed == ELINK_SPEED_1000 || line_speed == ELINK_SPEED_2500) {
                REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 1);
                /* Update threshold */
                REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, 0);
                /* Update init credit */
                init_crd = 778; /* (800-18-4) */

        } else {
                uint32_t thresh = (ELINK_ETH_MAX_JUMBO_PACKET_SIZE +
                                   ELINK_ETH_OVREHEAD) / 16;
                REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
                /* Update threshold */
                REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, thresh);
                /* Update init credit */
                switch (line_speed) {
                case ELINK_SPEED_10000:
                        init_crd = thresh + 553 - 22;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x",
                                    line_speed);
                        return ELINK_STATUS_ERROR;
                }
        }
        REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, init_crd);
        PMD_DRV_LOG(DEBUG, "PBF updated to speed %d credit %d",
                    line_speed, init_crd);

        /* Probe the credit changes */
        REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0x1);
        DELAY(1000 * 5);
        REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0x0);

        /* Enable port */
        REG_WR(sc, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port * 4, 0x0);
        return ELINK_STATUS_OK;
}

/**
 * elink_get_emac_base - retrive emac base address
 *
 * @bp:                 driver handle
 * @mdc_mdio_access:    access type
 * @port:               port id
 *
 * This function selects the MDC/MDIO access (through emac0 or
 * emac1) depend on the mdc_mdio_access, port, port swapped. Each
 * phy has a default access mode, which could also be overridden
 * by nvram configuration. This parameter, whether this is the
 * default phy configuration, or the nvram overrun
 * configuration, is passed here as mdc_mdio_access and selects
 * the emac_base for the CL45 read/writes operations
 */
static uint32_t elink_get_emac_base(struct bnx2x_softc *sc,
                                    uint32_t mdc_mdio_access, uint8_t port)
{
        uint32_t emac_base = 0;
        switch (mdc_mdio_access) {
        case SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE:
                break;
        case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0:
                if (REG_RD(sc, NIG_REG_PORT_SWAP))
                        emac_base = GRCBASE_EMAC1;
                else
                        emac_base = GRCBASE_EMAC0;
                break;
        case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1:
                if (REG_RD(sc, NIG_REG_PORT_SWAP))
                        emac_base = GRCBASE_EMAC0;
                else
                        emac_base = GRCBASE_EMAC1;
                break;
        case SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH:
                emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
                break;
        case SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED:
                emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
                break;
        default:
                break;
        }
        return emac_base;

}

/******************************************************************/
/*                      CL22 access functions                     */
/******************************************************************/
static elink_status_t elink_cl22_write(struct bnx2x_softc *sc,
                                       struct elink_phy *phy,
                                       uint16_t reg, uint16_t val)
{
        uint32_t tmp, mode;
        uint8_t i;
        elink_status_t rc = ELINK_STATUS_OK;
        /* Switch to CL22 */
        mode = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE,
               mode & ~EMAC_MDIO_MODE_CLAUSE_45);

        /* Address */
        tmp = ((phy->addr << 21) | (reg << 16) | val |
               EMAC_MDIO_COMM_COMMAND_WRITE_22 | EMAC_MDIO_COMM_START_BUSY);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);

        for (i = 0; i < 50; i++) {
                DELAY(10);

                tmp = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                        DELAY(5);
                        break;
                }
        }
        if (tmp & EMAC_MDIO_COMM_START_BUSY) {
                PMD_DRV_LOG(DEBUG, "write phy register failed");
                rc = ELINK_STATUS_TIMEOUT;
        }
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
        return rc;
}

static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
                                      struct elink_phy *phy,
                                      uint16_t reg, uint16_t * ret_val)
{
        uint32_t val, mode;
        uint16_t i;
        elink_status_t rc = ELINK_STATUS_OK;

        /* Switch to CL22 */
        mode = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE,
               mode & ~EMAC_MDIO_MODE_CLAUSE_45);

        /* Address */
        val = ((phy->addr << 21) | (reg << 16) |
               EMAC_MDIO_COMM_COMMAND_READ_22 | EMAC_MDIO_COMM_START_BUSY);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);

        for (i = 0; i < 50; i++) {
                DELAY(10);

                val = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                        *ret_val = (uint16_t) (val & EMAC_MDIO_COMM_DATA);
                        DELAY(5);
                        break;
                }
        }
        if (val & EMAC_MDIO_COMM_START_BUSY) {
                PMD_DRV_LOG(DEBUG, "read phy register failed");

                *ret_val = 0;
                rc = ELINK_STATUS_TIMEOUT;
        }
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
        return rc;
}

/******************************************************************/
/*                      CL45 access functions                     */
/******************************************************************/
static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
                                      struct elink_phy *phy, uint8_t devad,
                                      uint16_t reg, uint16_t * ret_val)
{
        uint32_t val;
        uint16_t i;
        elink_status_t rc = ELINK_STATUS_OK;
        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) {
                elink_set_mdio_clk(sc, phy->mdio_ctrl);
        }

        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
                elink_bits_en(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
                              EMAC_MDIO_STATUS_10MB);
        /* Address */
        val = ((phy->addr << 21) | (devad << 16) | reg |
               EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);

        for (i = 0; i < 50; i++) {
                DELAY(10);

                val = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                        DELAY(5);
                        break;
                }
        }
        if (val & EMAC_MDIO_COMM_START_BUSY) {
                PMD_DRV_LOG(DEBUG, "read phy register failed");
                elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);       // "MDC/MDIO access timeout"

                *ret_val = 0;
                rc = ELINK_STATUS_TIMEOUT;
        } else {
                /* Data */
                val = ((phy->addr << 21) | (devad << 16) |
                       EMAC_MDIO_COMM_COMMAND_READ_45 |
                       EMAC_MDIO_COMM_START_BUSY);
                REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);

                for (i = 0; i < 50; i++) {
                        DELAY(10);

                        val = REG_RD(sc, phy->mdio_ctrl +
                                     EMAC_REG_EMAC_MDIO_COMM);
                        if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                                *ret_val =
                                    (uint16_t) (val & EMAC_MDIO_COMM_DATA);
                                break;
                        }
                }
                if (val & EMAC_MDIO_COMM_START_BUSY) {
                        PMD_DRV_LOG(DEBUG, "read phy register failed");
                        elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);       // "MDC/MDIO access timeout"

                        *ret_val = 0;
                        rc = ELINK_STATUS_TIMEOUT;
                }
        }
        /* Work around for E3 A0 */
        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA) {
                phy->flags ^= ELINK_FLAGS_DUMMY_READ;
                if (phy->flags & ELINK_FLAGS_DUMMY_READ) {
                        uint16_t temp_val;
                        elink_cl45_read(sc, phy, devad, 0xf, &temp_val);
                }
        }

        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
                elink_bits_dis(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
                               EMAC_MDIO_STATUS_10MB);
        return rc;
}

static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
                                       struct elink_phy *phy, uint8_t devad,
                                       uint16_t reg, uint16_t val)
{
        uint32_t tmp;
        uint8_t i;
        elink_status_t rc = ELINK_STATUS_OK;
        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) {
                elink_set_mdio_clk(sc, phy->mdio_ctrl);
        }

        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
                elink_bits_en(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
                              EMAC_MDIO_STATUS_10MB);

        /* Address */
        tmp = ((phy->addr << 21) | (devad << 16) | reg |
               EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY);
        REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);

        for (i = 0; i < 50; i++) {
                DELAY(10);

                tmp = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                        DELAY(5);
                        break;
                }
        }
        if (tmp & EMAC_MDIO_COMM_START_BUSY) {
                PMD_DRV_LOG(DEBUG, "write phy register failed");
                elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);       // "MDC/MDIO access timeout"

                rc = ELINK_STATUS_TIMEOUT;
        } else {
                /* Data */
                tmp = ((phy->addr << 21) | (devad << 16) | val |
                       EMAC_MDIO_COMM_COMMAND_WRITE_45 |
                       EMAC_MDIO_COMM_START_BUSY);
                REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);

                for (i = 0; i < 50; i++) {
                        DELAY(10);

                        tmp = REG_RD(sc, phy->mdio_ctrl +
                                     EMAC_REG_EMAC_MDIO_COMM);
                        if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                                DELAY(5);
                                break;
                        }
                }
                if (tmp & EMAC_MDIO_COMM_START_BUSY) {
                        PMD_DRV_LOG(DEBUG, "write phy register failed");
                        elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT);       // "MDC/MDIO access timeout"

                        rc = ELINK_STATUS_TIMEOUT;
                }
        }
        /* Work around for E3 A0 */
        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA) {
                phy->flags ^= ELINK_FLAGS_DUMMY_READ;
                if (phy->flags & ELINK_FLAGS_DUMMY_READ) {
                        uint16_t temp_val;
                        elink_cl45_read(sc, phy, devad, 0xf, &temp_val);
                }
        }
        if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0)
                elink_bits_dis(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
                               EMAC_MDIO_STATUS_10MB);
        return rc;
}

/******************************************************************/
/*                      EEE section                                */
/******************************************************************/
static uint8_t elink_eee_has_cap(struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;

        if (REG_RD(sc, params->shmem2_base) <=
            offsetof(struct shmem2_region, eee_status[params->port]))
                 return 0;

        return 1;
}

static elink_status_t elink_eee_nvram_to_time(uint32_t nvram_mode,
                                              uint32_t * idle_timer)
{
        switch (nvram_mode) {
        case PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED:
                *idle_timer = ELINK_EEE_MODE_NVRAM_BALANCED_TIME;
                break;
        case PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE:
                *idle_timer = ELINK_EEE_MODE_NVRAM_AGGRESSIVE_TIME;
                break;
        case PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY:
                *idle_timer = ELINK_EEE_MODE_NVRAM_LATENCY_TIME;
                break;
        default:
                *idle_timer = 0;
                break;
        }

        return ELINK_STATUS_OK;
}

static elink_status_t elink_eee_time_to_nvram(uint32_t idle_timer,
                                              uint32_t * nvram_mode)
{
        switch (idle_timer) {
        case ELINK_EEE_MODE_NVRAM_BALANCED_TIME:
                *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED;
                break;
        case ELINK_EEE_MODE_NVRAM_AGGRESSIVE_TIME:
                *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE;
                break;
        case ELINK_EEE_MODE_NVRAM_LATENCY_TIME:
                *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY;
                break;
        default:
                *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED;
                break;
        }

        return ELINK_STATUS_OK;
}

static uint32_t elink_eee_calc_timer(struct elink_params *params)
{
        uint32_t eee_mode, eee_idle;
        struct bnx2x_softc *sc = params->sc;

        if (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) {
                if (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME) {
                        /* time value in eee_mode --> used directly */
                        eee_idle = params->eee_mode & ELINK_EEE_MODE_TIMER_MASK;
                } else {
                        /* hsi value in eee_mode --> time */
                        if (elink_eee_nvram_to_time(params->eee_mode &
                                                    ELINK_EEE_MODE_NVRAM_MASK,
                                                    &eee_idle))
                                return 0;
                }
        } else {
                /* hsi values in nvram --> time */
                eee_mode = ((REG_RD(sc, params->shmem_base +
                                    offsetof(struct shmem_region,
                                             dev_info.port_feature_config
                                             [params->
                                              port].eee_power_mode)) &
                             PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
                            PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);

                if (elink_eee_nvram_to_time(eee_mode, &eee_idle))
                        return 0;
        }

        return eee_idle;
}

static elink_status_t elink_eee_set_timers(struct elink_params *params,
                                           struct elink_vars *vars)
{
        uint32_t eee_idle = 0, eee_mode;
        struct bnx2x_softc *sc = params->sc;

        eee_idle = elink_eee_calc_timer(params);

        if (eee_idle) {
                REG_WR(sc, MISC_REG_CPMU_LP_IDLE_THR_P0 + (params->port << 2),
                       eee_idle);
        } else if ((params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) &&
                   (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) &&
                   (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME)) {
                PMD_DRV_LOG(DEBUG, "Error: Tx LPI is enabled with timer 0");
                return ELINK_STATUS_ERROR;
        }

        vars->eee_status &= ~(SHMEM_EEE_TIMER_MASK | SHMEM_EEE_TIME_OUTPUT_BIT);
        if (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME) {
                /* eee_idle in 1u --> eee_status in 16u */
                eee_idle >>= 4;
                vars->eee_status |= (eee_idle & SHMEM_EEE_TIMER_MASK) |
                    SHMEM_EEE_TIME_OUTPUT_BIT;
        } else {
                if (elink_eee_time_to_nvram(eee_idle, &eee_mode))
                        return ELINK_STATUS_ERROR;
                vars->eee_status |= eee_mode;
        }

        return ELINK_STATUS_OK;
}

static elink_status_t elink_eee_initial_config(struct elink_params *params,
                                               struct elink_vars *vars,
                                               uint8_t mode)
{
        vars->eee_status |= ((uint32_t) mode) << SHMEM_EEE_SUPPORTED_SHIFT;

        /* Propogate params' bits --> vars (for migration exposure) */
        if (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)
                vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT;
        else
                vars->eee_status &= ~SHMEM_EEE_LPI_REQUESTED_BIT;

        if (params->eee_mode & ELINK_EEE_MODE_ADV_LPI)
                vars->eee_status |= SHMEM_EEE_REQUESTED_BIT;
        else
                vars->eee_status &= ~SHMEM_EEE_REQUESTED_BIT;

        return elink_eee_set_timers(params, vars);
}

static elink_status_t elink_eee_disable(struct elink_phy *phy,
                                        struct elink_params *params,
                                        struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;

        /* Make Certain LPI is disabled */
        REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), 0);

        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, 0x0);

        vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK;

        return ELINK_STATUS_OK;
}

static elink_status_t elink_eee_advertise(struct elink_phy *phy,
                                          struct elink_params *params,
                                          struct elink_vars *vars,
                                          uint8_t modes)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val = 0;

        /* Mask events preventing LPI generation */
        REG_WR(sc, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20);

        if (modes & SHMEM_EEE_10G_ADV) {
                PMD_DRV_LOG(DEBUG, "Advertise 10GBase-T EEE");
                val |= 0x8;
        }
        if (modes & SHMEM_EEE_1G_ADV) {
                PMD_DRV_LOG(DEBUG, "Advertise 1GBase-T EEE");
                val |= 0x4;
        }

        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, val);

        vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK;
        vars->eee_status |= (modes << SHMEM_EEE_ADV_STATUS_SHIFT);

        return ELINK_STATUS_OK;
}

static void elink_update_mng_eee(struct elink_params *params,
                                 uint32_t eee_status)
{
        struct bnx2x_softc *sc = params->sc;

        if (elink_eee_has_cap(params))
                REG_WR(sc, params->shmem2_base +
                       offsetof(struct shmem2_region,
                                eee_status[params->port]), eee_status);
}

static void elink_eee_an_resolve(struct elink_phy *phy,
                                 struct elink_params *params,
                                 struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t adv = 0, lp = 0;
        uint32_t lp_adv = 0;
        uint8_t neg = 0;

        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, &adv);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LP_EEE_ADV, &lp);

        if (lp & 0x2) {
                lp_adv |= SHMEM_EEE_100M_ADV;
                if (adv & 0x2) {
                        if (vars->line_speed == ELINK_SPEED_100)
                                neg = 1;
                        PMD_DRV_LOG(DEBUG, "EEE negotiated - 100M");
                }
        }
        if (lp & 0x14) {
                lp_adv |= SHMEM_EEE_1G_ADV;
                if (adv & 0x14) {
                        if (vars->line_speed == ELINK_SPEED_1000)
                                neg = 1;
                        PMD_DRV_LOG(DEBUG, "EEE negotiated - 1G");
                }
        }
        if (lp & 0x68) {
                lp_adv |= SHMEM_EEE_10G_ADV;
                if (adv & 0x68) {
                        if (vars->line_speed == ELINK_SPEED_10000)
                                neg = 1;
                        PMD_DRV_LOG(DEBUG, "EEE negotiated - 10G");
                }
        }

        vars->eee_status &= ~SHMEM_EEE_LP_ADV_STATUS_MASK;
        vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT);

        if (neg) {
                PMD_DRV_LOG(DEBUG, "EEE is active");
                vars->eee_status |= SHMEM_EEE_ACTIVE_BIT;
        }
}

/******************************************************************/
/*                      BSC access functions from E3              */
/******************************************************************/
static void elink_bsc_module_sel(struct elink_params *params)
{
        int idx;
        uint32_t board_cfg, sfp_ctrl;
        uint32_t i2c_pins[I2C_SWITCH_WIDTH], i2c_val[I2C_SWITCH_WIDTH];
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        /* Read I2C output PINs */
        board_cfg = REG_RD(sc, params->shmem_base +
                           offsetof(struct shmem_region,
                                    dev_info.shared_hw_config.board));
        i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK;
        i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >>
            SHARED_HW_CFG_E3_I2C_MUX1_SHIFT;

        /* Read I2C output value */
        sfp_ctrl = REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[port].
                                   e3_cmn_pin_cfg));
        i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0;
        i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0;
        PMD_DRV_LOG(DEBUG, "Setting BSC switch");
        for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++)
                elink_set_cfg_pin(sc, i2c_pins[idx], i2c_val[idx]);
}

static elink_status_t elink_bsc_read(struct elink_params *params,
                                     struct bnx2x_softc *sc,
                                     uint8_t sl_devid,
                                     uint16_t sl_addr,
                                     uint8_t lc_addr,
                                     uint8_t xfer_cnt, uint32_t * data_array)
{
        uint32_t val, i;
        elink_status_t rc = ELINK_STATUS_OK;

        if (xfer_cnt > 16) {
                PMD_DRV_LOG(DEBUG, "invalid xfer_cnt %d. Max is 16 bytes",
                            xfer_cnt);
                return ELINK_STATUS_ERROR;
        }
        if (params)
                elink_bsc_module_sel(params);

        xfer_cnt = 16 - lc_addr;

        /* Enable the engine */
        val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
        val |= MCPR_IMC_COMMAND_ENABLE;
        REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val);

        /* Program slave device ID */
        val = (sl_devid << 16) | sl_addr;
        REG_WR(sc, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val);

        /* Start xfer with 0 byte to update the address pointer ??? */
        val = (MCPR_IMC_COMMAND_ENABLE) |
            (MCPR_IMC_COMMAND_WRITE_OP <<
             MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
            (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0);
        REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val);

        /* Poll for completion */
        i = 0;
        val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
        while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) {
                DELAY(10);
                val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
                if (i++ > 1000) {
                        PMD_DRV_LOG(DEBUG, "wr 0 byte timed out after %d try",
                                    i);
                        rc = ELINK_STATUS_TIMEOUT;
                        break;
                }
        }
        if (rc == ELINK_STATUS_TIMEOUT)
                return rc;

        /* Start xfer with read op */
        val = (MCPR_IMC_COMMAND_ENABLE) |
            (MCPR_IMC_COMMAND_READ_OP <<
             MCPR_IMC_COMMAND_OPERATION_BITSHIFT) |
            (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) |
            (xfer_cnt);
        REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val);

        /* Poll for completion */
        i = 0;
        val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
        while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) {
                DELAY(10);
                val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
                if (i++ > 1000) {
                        PMD_DRV_LOG(DEBUG, "rd op timed out after %d try", i);
                        rc = ELINK_STATUS_TIMEOUT;
                        break;
                }
        }
        if (rc == ELINK_STATUS_TIMEOUT)
                return rc;

        for (i = (lc_addr >> 2); i < 4; i++) {
                data_array[i] = REG_RD(sc, (MCP_REG_MCPR_IMC_DATAREG0 + i * 4));
#ifdef __BIG_ENDIAN
                data_array[i] = ((data_array[i] & 0x000000ff) << 24) |
                    ((data_array[i] & 0x0000ff00) << 8) |
                    ((data_array[i] & 0x00ff0000) >> 8) |
                    ((data_array[i] & 0xff000000) >> 24);
#endif
        }
        return rc;
}

static void elink_cl45_read_or_write(struct bnx2x_softc *sc,
                                     struct elink_phy *phy, uint8_t devad,
                                     uint16_t reg, uint16_t or_val)
{
        uint16_t val;
        elink_cl45_read(sc, phy, devad, reg, &val);
        elink_cl45_write(sc, phy, devad, reg, val | or_val);
}

static void elink_cl45_read_and_write(struct bnx2x_softc *sc,
                                      struct elink_phy *phy,
                                      uint8_t devad, uint16_t reg,
                                      uint16_t and_val)
{
        uint16_t val;
        elink_cl45_read(sc, phy, devad, reg, &val);
        elink_cl45_write(sc, phy, devad, reg, val & and_val);
}

static uint8_t elink_get_warpcore_lane(struct elink_params *params)
{
        uint8_t lane = 0;
        struct bnx2x_softc *sc = params->sc;
        uint32_t path_swap, path_swap_ovr;
        uint8_t path, port;

        path = SC_PATH(sc);
        port = params->port;

        if (elink_is_4_port_mode(sc)) {
                uint32_t port_swap, port_swap_ovr;

                /* Figure out path swap value */
                path_swap_ovr = REG_RD(sc, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR);
                if (path_swap_ovr & 0x1)
                        path_swap = (path_swap_ovr & 0x2);
                else
                        path_swap = REG_RD(sc, MISC_REG_FOUR_PORT_PATH_SWAP);

                if (path_swap)
                        path = path ^ 1;

                /* Figure out port swap value */
                port_swap_ovr = REG_RD(sc, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR);
                if (port_swap_ovr & 0x1)
                        port_swap = (port_swap_ovr & 0x2);
                else
                        port_swap = REG_RD(sc, MISC_REG_FOUR_PORT_PORT_SWAP);

                if (port_swap)
                        port = port ^ 1;

                lane = (port << 1) + path;
        } else {                /* Two port mode - no port swap */

                /* Figure out path swap value */
                path_swap_ovr = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP_OVWR);
                if (path_swap_ovr & 0x1) {
                        path_swap = (path_swap_ovr & 0x2);
                } else {
                        path_swap = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP);
                }
                if (path_swap)
                        path = path ^ 1;

                lane = path << 1;
        }
        return lane;
}

static void elink_set_aer_mmd(struct elink_params *params,
                              struct elink_phy *phy)
{
        uint32_t ser_lane;
        uint16_t offset, aer_val;
        struct bnx2x_softc *sc = params->sc;
        ser_lane = ((params->lane_config &
                     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
                    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);

        offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ?
            (phy->addr + ser_lane) : 0;

        if (USES_WARPCORE(sc)) {
                aer_val = elink_get_warpcore_lane(params);
                /* In Dual-lane mode, two lanes are joined together,
                 * so in order to configure them, the AER broadcast method is
                 * used here.
                 * 0x200 is the broadcast address for lanes 0,1
                 * 0x201 is the broadcast address for lanes 2,3
                 */
                if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
                        aer_val = (aer_val >> 1) | 0x200;
        } else if (CHIP_IS_E2(sc))
                aer_val = 0x3800 + offset - 1;
        else
                aer_val = 0x3800 + offset;

        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, aer_val);

}

/******************************************************************/
/*                      Internal phy section                      */
/******************************************************************/

static void elink_set_serdes_access(struct bnx2x_softc *sc, uint8_t port)
{
        uint32_t emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;

        /* Set Clause 22 */
        REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_ST + port * 0x10, 1);
        REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000);
        DELAY(500);
        REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f);
        DELAY(500);
        /* Set Clause 45 */
        REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_ST + port * 0x10, 0);
}

static void elink_serdes_deassert(struct bnx2x_softc *sc, uint8_t port)
{
        uint32_t val;

        PMD_DRV_LOG(DEBUG, "elink_serdes_deassert");

        val = ELINK_SERDES_RESET_BITS << (port * 16);

        /* Reset and unreset the SerDes/XGXS */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
        DELAY(500);
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);

        elink_set_serdes_access(sc, port);

        REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_DEVAD + port * 0x10,
               ELINK_DEFAULT_PHY_DEV_ADDR);
}

static void elink_xgxs_specific_func(struct elink_phy *phy,
                                     struct elink_params *params,
                                     uint32_t action)
{
        struct bnx2x_softc *sc = params->sc;
        switch (action) {
        case ELINK_PHY_INIT:
                /* Set correct devad */
                REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_ST + params->port * 0x18, 0);
                REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port * 0x18,
                       phy->def_md_devad);
                break;
        }
}

static void elink_xgxs_deassert(struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port;
        uint32_t val;
        PMD_DRV_LOG(DEBUG, "elink_xgxs_deassert");
        port = params->port;

        val = ELINK_XGXS_RESET_BITS << (port * 16);

        /* Reset and unreset the SerDes/XGXS */
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
        DELAY(500);
        REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
        elink_xgxs_specific_func(&params->phy[ELINK_INT_PHY], params,
                                 ELINK_PHY_INIT);
}

static void elink_calc_ieee_aneg_adv(struct elink_phy *phy,
                                     struct elink_params *params,
                                     uint16_t * ieee_fc)
{
        *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
        /* Resolve pause mode and advertisement Please refer to Table
         * 28B-3 of the 802.3ab-1999 spec
         */

        switch (phy->req_flow_ctrl) {
        case ELINK_FLOW_CTRL_AUTO:
                switch (params->req_fc_auto_adv) {
                case ELINK_FLOW_CTRL_BOTH:
                        *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                        break;
                case ELINK_FLOW_CTRL_RX:
                case ELINK_FLOW_CTRL_TX:
                        *ieee_fc |=
                            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                        break;
                default:
                        break;
                }
                break;
        case ELINK_FLOW_CTRL_TX:
                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                break;

        case ELINK_FLOW_CTRL_RX:
        case ELINK_FLOW_CTRL_BOTH:
                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                break;

        case ELINK_FLOW_CTRL_NONE:
        default:
                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
                break;
        }
        PMD_DRV_LOG(DEBUG, "ieee_fc = 0x%x", *ieee_fc);
}

static void set_phy_vars(struct elink_params *params, struct elink_vars *vars)
{
        uint8_t actual_phy_idx, phy_index, link_cfg_idx;
        uint8_t phy_config_swapped = params->multi_phy_config &
            PORT_HW_CFG_PHY_SWAPPED_ENABLED;
        for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
             phy_index++) {
                link_cfg_idx = ELINK_LINK_CONFIG_IDX(phy_index);
                actual_phy_idx = phy_index;
                if (phy_config_swapped) {
                        if (phy_index == ELINK_EXT_PHY1)
                                actual_phy_idx = ELINK_EXT_PHY2;
                        else if (phy_index == ELINK_EXT_PHY2)
                                actual_phy_idx = ELINK_EXT_PHY1;
                }
                params->phy[actual_phy_idx].req_flow_ctrl =
                    params->req_flow_ctrl[link_cfg_idx];

                params->phy[actual_phy_idx].req_line_speed =
                    params->req_line_speed[link_cfg_idx];

                params->phy[actual_phy_idx].speed_cap_mask =
                    params->speed_cap_mask[link_cfg_idx];

                params->phy[actual_phy_idx].req_duplex =
                    params->req_duplex[link_cfg_idx];

                if (params->req_line_speed[link_cfg_idx] ==
                    ELINK_SPEED_AUTO_NEG)
                        vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;

                PMD_DRV_LOG(DEBUG, "req_flow_ctrl %x, req_line_speed %x,"
                            " speed_cap_mask %x",
                            params->phy[actual_phy_idx].req_flow_ctrl,
                            params->phy[actual_phy_idx].req_line_speed,
                            params->phy[actual_phy_idx].speed_cap_mask);
        }
}

static void elink_ext_phy_set_pause(struct elink_params *params,
                                    struct elink_phy *phy,
                                    struct elink_vars *vars)
{
        uint16_t val;
        struct bnx2x_softc *sc = params->sc;
        /* Read modify write pause advertizing */
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val);

        val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;

        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
        elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
        if ((vars->ieee_fc &
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
                val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
        }
        if ((vars->ieee_fc &
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
                val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
        }
        PMD_DRV_LOG(DEBUG, "Ext phy AN advertize 0x%x", val);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
}

static void elink_pause_resolve(struct elink_vars *vars, uint32_t pause_result)
{                               /*  LD      LP   */
        switch (pause_result) { /* ASYM P ASYM P */
        case 0xb:               /*   1  0   1  1 */
                vars->flow_ctrl = ELINK_FLOW_CTRL_TX;
                break;

        case 0xe:               /*   1  1   1  0 */
                vars->flow_ctrl = ELINK_FLOW_CTRL_RX;
                break;

        case 0x5:               /*   0  1   0  1 */
        case 0x7:               /*   0  1   1  1 */
        case 0xd:               /*   1  1   0  1 */
        case 0xf:               /*   1  1   1  1 */
                vars->flow_ctrl = ELINK_FLOW_CTRL_BOTH;
                break;

        default:
                break;
        }
        if (pause_result & (1 << 0))
                vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
        if (pause_result & (1 << 1))
                vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;

}

static void elink_ext_phy_update_adv_fc(struct elink_phy *phy,
                                        struct elink_params *params,
                                        struct elink_vars *vars)
{
        uint16_t ld_pause;      /* local */
        uint16_t lp_pause;      /* link partner */
        uint16_t pause_result;
        struct bnx2x_softc *sc = params->sc;
        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) {
                elink_cl22_read(sc, phy, 0x4, &ld_pause);
                elink_cl22_read(sc, phy, 0x5, &lp_pause);
        } else if (CHIP_IS_E3(sc) && ELINK_SINGLE_MEDIA_DIRECT(params)) {
                uint8_t lane = elink_get_warpcore_lane(params);
                uint16_t gp_status, gp_mask;
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4,
                                &gp_status);
                gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL |
                           MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) <<
                    lane;
                if ((gp_status & gp_mask) == gp_mask) {
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_ADV_PAUSE, &ld_pause);
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
                } else {
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_CL37_FC_LD, &ld_pause);
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_CL37_FC_LP, &lp_pause);
                        ld_pause = ((ld_pause &
                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
                                    << 3);
                        lp_pause = ((lp_pause &
                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
                                    << 3);
                }
        } else {
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD,
                                MDIO_AN_REG_ADV_PAUSE, &ld_pause);
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD,
                                MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
        }
        pause_result = (ld_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
        pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
        PMD_DRV_LOG(DEBUG, "Ext PHY pause result 0x%x", pause_result);
        elink_pause_resolve(vars, pause_result);

}

static uint8_t elink_ext_phy_resolve_fc(struct elink_phy *phy,
                                        struct elink_params *params,
                                        struct elink_vars *vars)
{
        uint8_t ret = 0;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        if (phy->req_flow_ctrl != ELINK_FLOW_CTRL_AUTO) {
                /* Update the advertised flow-controled of LD/LP in AN */
                if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
                        elink_ext_phy_update_adv_fc(phy, params, vars);
                /* But set the flow-control result as the requested one */
                vars->flow_ctrl = phy->req_flow_ctrl;
        } else if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG)
                vars->flow_ctrl = params->req_fc_auto_adv;
        else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
                ret = 1;
                elink_ext_phy_update_adv_fc(phy, params, vars);
        }
        return ret;
}

/******************************************************************/
/*                      Warpcore section                          */
/******************************************************************/
/* The init_internal_warpcore should mirror the xgxs,
 * i.e. reset the lane (if needed), set aer for the
 * init configuration, and set/clear SGMII flag. Internal
 * phy init is done purely in phy_init stage.
 */
#define WC_TX_DRIVER(post2, idriver, ipre) \
        ((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \
         (idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \
         (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))

#define WC_TX_FIR(post, main, pre) \
        ((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \
         (main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \
         (pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET))

static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy,
                                         struct elink_params *params,
                                         struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t i;
        static struct elink_reg_set reg_set[] = {
                /* Step 1 - Program the TX/RX alignment markers */
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537},
                /* Step 2 - Configure the NP registers */
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620}
        };
        PMD_DRV_LOG(DEBUG, "Enabling 20G-KR2");

        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_CL49_USERB0_CTRL, (3 << 6));

        for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
                                 reg_set[i].val);

        /* Start KR2 work-around timer which handles BNX2X8073 link-parner */
        vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE;
        elink_update_link_attr(params, vars->link_attr_sync);
}

static void elink_disable_kr2(struct elink_params *params,
                              struct elink_vars *vars, struct elink_phy *phy)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t i;
        static struct elink_reg_set reg_set[] = {
                /* Step 1 - Program the TX/RX alignment markers */
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002},
                {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000}
        };
        PMD_DRV_LOG(DEBUG, "Disabling 20G-KR2");

        for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
                                 reg_set[i].val);
        vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
        elink_update_link_attr(params, vars->link_attr_sync);

        vars->check_kr2_recovery_cnt = ELINK_CHECK_KR2_RECOVERY_CNT;
}

static void elink_warpcore_set_lpi_passthrough(struct elink_phy *phy,
                                               struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;

        PMD_DRV_LOG(DEBUG, "Configure WC for LPI pass through");
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c);
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_DIGITAL4_MISC5, 0xc000);
}

static void elink_warpcore_restart_AN_KR(struct elink_phy *phy,
                                         struct elink_params *params)
{
        /* Restart autoneg on the leading lane only */
        struct bnx2x_softc *sc = params->sc;
        uint16_t lane = elink_get_warpcore_lane(params);
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, lane);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);

        /* Restore AER */
        elink_set_aer_mmd(params, phy);
}

static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
                                        struct elink_params *params,
                                        struct elink_vars *vars)
{
        uint16_t lane, i, cl72_ctrl, an_adv = 0;
        struct bnx2x_softc *sc = params->sc;
        static struct elink_reg_set reg_set[] = {
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
                {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
                {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
                /* Disable Autoneg: re-enable it after adv is done. */
                {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0},
                {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
        };
        PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR");
        /* Set to default registers that may be overriden by 10G force */
        for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
                                 reg_set[i].val);

        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
        cl72_ctrl &= 0x08ff;
        cl72_ctrl |= 0x3800;
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);

        /* Check adding advertisement for 1G KX */
        if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
            (vars->line_speed == ELINK_SPEED_1000)) {
                uint16_t addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
                an_adv |= (1 << 5);

                /* Enable CL37 1G Parallel Detect */
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, addr, 0x1);
                PMD_DRV_LOG(DEBUG, "Advertize 1G");
        }
        if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
            (vars->line_speed == ELINK_SPEED_10000)) {
                /* Check adding advertisement for 10G KR */
                an_adv |= (1 << 7);
                /* Enable 10G Parallel Detect */
                CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                                  MDIO_AER_BLOCK_AER_REG, 0);

                elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                                 MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
                elink_set_aer_mmd(params, phy);
                PMD_DRV_LOG(DEBUG, "Advertize 10G");
        }

        /* Set Transmit PMD settings */
        lane = elink_get_warpcore_lane(params);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane,
                         WC_TX_DRIVER(0x02, 0x06, 0x09));
        /* Configure the next lane if dual mode */
        if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
                elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * (lane + 1),
                                 WC_TX_DRIVER(0x02, 0x06, 0x09));
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, 0x03f0);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, 0x03f0);

        /* Advertised speeds */
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                         MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);

        /* Advertised and set FEC (Forward Error Correction) */
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                         MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2,
                         (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY |
                          MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ));

        /* Enable CL37 BAM */
        if (REG_RD(sc, params->shmem_base +
                   offsetof(struct shmem_region,
                            dev_info.port_hw_config[params->port].
                            default_cfg)) &
            PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL,
                                         1);
                PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR");
        }

        /* Advertise pause */
        elink_ext_phy_set_pause(params, phy, vars);
        vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_DIGITAL5_MISC7, 0x100);

        /* Over 1G - AN local device user page 1 */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_DIGITAL3_UP1, 0x1f);

        if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
            (phy->req_line_speed == ELINK_SPEED_20000)) {

                CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                                  MDIO_AER_BLOCK_AER_REG, lane);

                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_RX1_PCI_CTRL +
                                         (0x10 * lane), (1 << 11));

                elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7);
                elink_set_aer_mmd(params, phy);

                elink_warpcore_enable_AN_KR2(phy, params, vars);
        } else {
                elink_disable_kr2(params, vars, phy);
        }

        /* Enable Autoneg: only on the main lane */
        elink_warpcore_restart_AN_KR(phy, params);
}

static void elink_warpcore_set_10G_KR(struct elink_phy *phy,
                                      struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val16, i, lane;
        static struct elink_reg_set reg_set[] = {
                /* Disable Autoneg */
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
                {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
                 0x3f00},
                {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
                {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
                {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
                {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
                /* Leave cl72 training enable, needed for KR */
                {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}
        };

        for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
                                 reg_set[i].val);

        lane = elink_get_warpcore_lane(params);
        /* Global registers */
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, 0);
        /* Disable CL36 PCS Tx */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
        val16 &= ~(0x0011 << lane);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);

        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
        val16 |= (0x0303 << (lane << 1));
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
        /* Restore AER */
        elink_set_aer_mmd(params, phy);
        /* Set speed via PMA/PMD register */
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);

        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB);

        /* Enable encoded forced speed */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30);

        /* Turn TX scramble payload only the 64/66 scrambler */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_TX66_CONTROL, 0x9);

        /* Turn RX scramble payload only the 64/66 scrambler */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_RX66_CONTROL, 0xF9);

        /* Set and clear loopback to cause a reset to 64/66 decoder */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x4000);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0);

}

static void elink_warpcore_set_10G_XFI(struct elink_phy *phy,
                                       struct elink_params *params,
                                       uint8_t is_xfi)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t misc1_val, tap_val, tx_driver_val, lane, val;
        uint32_t cfg_tap_val, tx_drv_brdct, tx_equal;

        /* Hold rxSeqStart */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000);

        /* Hold tx_fifo_reset */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, 0x1);

        /* Disable CL73 AN */
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0);

        /* Disable 100FX Enable and Auto-Detect */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_FX100_CTRL1, 0xFFFA);

        /* Disable 100FX Idle detect */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_FX100_CTRL3, 0x0080);

        /* Set Block address to Remote PHY & Clear forced_speed[5] */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_DIGITAL4_MISC3, 0xFF7F);

        /* Turn off auto-detect & fiber mode */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
                                  0xFFEE);

        /* Set filter_force_link, disable_false_link and parallel_detect */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &val);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
                         ((val | 0x0006) & 0xFFFE));

        /* Set XFI / SFI */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_SERDESDIGITAL_MISC1, &misc1_val);

        misc1_val &= ~(0x1f);

        if (is_xfi) {
                misc1_val |= 0x5;
                tap_val = WC_TX_FIR(0x08, 0x37, 0x00);
                tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03);
        } else {
                cfg_tap_val = REG_RD(sc, params->shmem_base +
                                     offsetof(struct shmem_region,
                                              dev_info.port_hw_config[params->
                                                                      port].sfi_tap_values));

                tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK;

                tx_drv_brdct = (cfg_tap_val &
                                PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >>
                    PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT;

                misc1_val |= 0x9;

                /* TAP values are controlled by nvram, if value there isn't 0 */
                if (tx_equal)
                        tap_val = (uint16_t) tx_equal;
                else
                        tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02);

                if (tx_drv_brdct)
                        tx_driver_val =
                            WC_TX_DRIVER(0x03, (uint16_t) tx_drv_brdct, 0x06);
                else
                        tx_driver_val = WC_TX_DRIVER(0x03, 0x02, 0x06);
        }
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val);

        /* Set Transmit PMD settings */
        lane = elink_get_warpcore_lane(params);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX_FIR_TAP,
                         tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane,
                         tx_driver_val);

        /* Enable fiber mode, enable and invert sig_det */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0xd);

        /* Set Block address to Remote PHY & Set forced_speed[5], 40bit mode */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_DIGITAL4_MISC3, 0x8080);

        elink_warpcore_set_lpi_passthrough(phy, params);

        /* 10G XFI Full Duplex */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x100);

        /* Release tx_fifo_reset */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3,
                                  0xFFFE);
        /* Release rxSeqStart */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x7FFF);
}

static void elink_warpcore_set_20G_force_KR2(struct elink_phy *phy,
                                             struct elink_params *params)
{
        uint16_t val;
        struct bnx2x_softc *sc = params->sc;
        /* Set global registers, so set AER lane to 0 */
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, 0);

        /* Disable sequencer */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1 << 13));

        elink_set_aer_mmd(params, phy);

        elink_cl45_read_and_write(sc, phy, MDIO_PMA_DEVAD,
                                  MDIO_WC_REG_PMD_KR_CONTROL, ~(1 << 1));
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0);
        /* Turn off CL73 */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_CL73_USERB0_CTRL, &val);
        val &= ~(1 << 5);
        val |= (1 << 6);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL73_USERB0_CTRL, val);

        /* Set 20G KR2 force speed */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f);

        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_DIGITAL4_MISC3, (1 << 7));

        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val);
        val &= ~(3 << 14);
        val |= (1 << 15);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A);

        /* Enable sequencer (over lane 0) */
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, 0);

        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1 << 13));

        elink_set_aer_mmd(params, phy);
}

static void elink_warpcore_set_20G_DXGXS(struct bnx2x_softc *sc,
                                         struct elink_phy *phy, uint16_t lane)
{
        /* Rx0 anaRxControl1G */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX0_ANARXCONTROL1G, 0x90);

        /* Rx2 anaRxControl1G */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW0, 0xE070);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW1, 0xC0D0);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW2, 0xA0B0);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW3, 0x8090);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX66_SCW1_MASK, 0xF0F0);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX66_SCW2_MASK, 0xF0F0);

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_RX66_SCW3_MASK, 0xF0F0);

        /* Serdes Digital Misc1 */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6008);

        /* Serdes Digital4 Misc3 */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_DIGITAL4_MISC3, 0x8088);

        /* Set Transmit PMD settings */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX_FIR_TAP,
                         (WC_TX_FIR(0x12, 0x2d, 0x00) |
                          MDIO_WC_REG_TX_FIR_TAP_ENABLE));
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane,
                         WC_TX_DRIVER(0x02, 0x02, 0x02));
}

static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
                                           struct elink_params *params,
                                           uint8_t fiber_mode,
                                           uint8_t always_autoneg)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val16, digctrl_kx1, digctrl_kx2;

        /* Clear XFI clock comp in non-10G single lane mode. */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_RX66_CONTROL, ~(3 << 13));

        elink_warpcore_set_lpi_passthrough(phy, params);

        if (always_autoneg || phy->req_line_speed == ELINK_SPEED_AUTO_NEG) {
                /* SGMII Autoneg */
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
                                         0x1000);
                PMD_DRV_LOG(DEBUG, "set SGMII AUTONEG");
        } else {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
                val16 &= 0xcebf;
                switch (phy->req_line_speed) {
                case ELINK_SPEED_10:
                        break;
                case ELINK_SPEED_100:
                        val16 |= 0x2000;
                        break;
                case ELINK_SPEED_1000:
                        val16 |= 0x0040;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG,
                                    "Speed not supported: 0x%x",
                                    phy->req_line_speed);
                        return;
                }

                if (phy->req_duplex == DUPLEX_FULL)
                        val16 |= 0x0100;

                elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16);

                PMD_DRV_LOG(DEBUG, "set SGMII force speed %d",
                            phy->req_line_speed);
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
                PMD_DRV_LOG(DEBUG, "  (readback) %x", val16);
        }

        /* SGMII Slave mode and disable signal detect */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &digctrl_kx1);
        if (fiber_mode)
                digctrl_kx1 = 1;
        else
                digctrl_kx1 &= 0xff4a;

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, digctrl_kx1);

        /* Turn off parallel detect */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
                         (digctrl_kx2 & ~(1 << 2)));

        /* Re-enable parallel detect */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
                         (digctrl_kx2 | (1 << 2)));

        /* Enable autodet */
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
                         (digctrl_kx1 | 0x10));
}

static void elink_warpcore_reset_lane(struct bnx2x_softc *sc,
                                      struct elink_phy *phy, uint8_t reset)
{
        uint16_t val;
        /* Take lane out of reset after configuration is finished */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_DIGITAL5_MISC6, &val);
        if (reset)
                val |= 0xC000;
        else
                val &= 0x3FFF;
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_DIGITAL5_MISC6, val);
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_DIGITAL5_MISC6, &val);
}

/* Clear SFI/XFI link settings registers */
static void elink_warpcore_clear_regs(struct elink_phy *phy,
                                      struct elink_params *params,
                                      uint16_t lane)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t i;
        static struct elink_reg_set wc_regs[] = {
                {MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0},
                {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL1, 0x014a},
                {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL3, 0x0800},
                {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL4_MISC3, 0x8008},
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1,
                 0x0195},
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2,
                 0x0007},
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3,
                 0x0002},
                {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000},
                {MDIO_WC_DEVAD, MDIO_WC_REG_TX_FIR_TAP, 0x0000},
                {MDIO_WC_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040},
                {MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x0140}
        };
        /* Set XFI clock comp as default. */
        elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_RX66_CONTROL, (3 << 13));

        for (i = 0; i < ARRAY_SIZE(wc_regs); i++)
                elink_cl45_write(sc, phy, wc_regs[i].devad, wc_regs[i].reg,
                                 wc_regs[i].val);

        lane = elink_get_warpcore_lane(params);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, 0x0990);

}

static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc,
                                                uint32_t shmem_base,
                                                uint8_t port,
                                                uint8_t * gpio_num,
                                                uint8_t * gpio_port)
{
        uint32_t cfg_pin;
        *gpio_num = 0;
        *gpio_port = 0;
        if (CHIP_IS_E3(sc)) {
                cfg_pin = (REG_RD(sc, shmem_base +
                                  offsetof(struct shmem_region,
                                           dev_info.port_hw_config[port].
                                           e3_sfp_ctrl)) &
                           PORT_HW_CFG_E3_MOD_ABS_MASK) >>
                    PORT_HW_CFG_E3_MOD_ABS_SHIFT;

                /* Should not happen. This function called upon interrupt
                 * triggered by GPIO ( since EPIO can only generate interrupts
                 * to MCP).
                 * So if this function was called and none of the GPIOs was set,
                 * it means the shit hit the fan.
                 */
                if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
                    (cfg_pin > PIN_CFG_GPIO3_P1)) {
                        PMD_DRV_LOG(DEBUG,
                                    "No cfg pin %x for module detect indication",
                                    cfg_pin);
                        return ELINK_STATUS_ERROR;
                }

                *gpio_num = (cfg_pin - PIN_CFG_GPIO0_P0) & 0x3;
                *gpio_port = (cfg_pin - PIN_CFG_GPIO0_P0) >> 2;
        } else {
                *gpio_num = MISC_REGISTERS_GPIO_3;
                *gpio_port = port;
        }

        return ELINK_STATUS_OK;
}

static int elink_is_sfp_module_plugged(struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t gpio_num, gpio_port;
        uint32_t gpio_val;
        if (elink_get_mod_abs_int_cfg(sc,
                                      params->shmem_base, params->port,
                                      &gpio_num, &gpio_port) != ELINK_STATUS_OK)
                return 0;
        gpio_val = elink_cb_gpio_read(sc, gpio_num, gpio_port);

        /* Call the handling function in case module is detected */
        if (gpio_val == 0)
                return 1;
        else
                return 0;
}

static int elink_warpcore_get_sigdet(struct elink_phy *phy,
                                     struct elink_params *params)
{
        uint16_t gp2_status_reg0, lane;
        struct bnx2x_softc *sc = params->sc;

        lane = elink_get_warpcore_lane(params);

        elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_0,
                        &gp2_status_reg0);

        return (gp2_status_reg0 >> (8 + lane)) & 0x1;
}

static void elink_warpcore_config_runtime(struct elink_phy *phy,
                                          struct elink_params *params,
                                          struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t serdes_net_if;
        uint16_t gp_status1 = 0, lnkup = 0, lnkup_kr = 0;

        vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1;

        if (!vars->turn_to_run_wc_rt)
                return;

        if (vars->rx_tx_asic_rst) {
                uint16_t lane = elink_get_warpcore_lane(params);
                serdes_net_if = (REG_RD(sc, params->shmem_base +
                                        offsetof(struct shmem_region,
                                                 dev_info.port_hw_config
                                                 [params->port].
                                                 default_cfg)) &
                                 PORT_HW_CFG_NET_SERDES_IF_MASK);

                switch (serdes_net_if) {
                case PORT_HW_CFG_NET_SERDES_IF_KR:
                        /* Do we get link yet? */
                        elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 0x81d1,
                                        &gp_status1);
                        lnkup = (gp_status1 >> (8 + lane)) & 0x1;       /* 1G */
                        /*10G KR */
                        lnkup_kr = (gp_status1 >> (12 + lane)) & 0x1;

                        if (lnkup_kr || lnkup) {
                                vars->rx_tx_asic_rst = 0;
                        } else {
                                /* Reset the lane to see if link comes up. */
                                elink_warpcore_reset_lane(sc, phy, 1);
                                elink_warpcore_reset_lane(sc, phy, 0);

                                /* Restart Autoneg */
                                elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                                                 MDIO_WC_REG_IEEE0BLK_MIICNTL,
                                                 0x1200);

                                vars->rx_tx_asic_rst--;
                                PMD_DRV_LOG(DEBUG, "0x%x retry left",
                                            vars->rx_tx_asic_rst);
                        }
                        break;

                default:
                        break;
                }

        }
        /*params->rx_tx_asic_rst */
}

static void elink_warpcore_config_sfi(struct elink_phy *phy,
                                      struct elink_params *params)
{
        uint16_t lane = elink_get_warpcore_lane(params);

        elink_warpcore_clear_regs(phy, params, lane);
        if ((params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)] ==
             ELINK_SPEED_10000) &&
            (phy->media_type != ELINK_ETH_PHY_SFP_1G_FIBER)) {
                PMD_DRV_LOG(DEBUG, "Setting 10G SFI");
                elink_warpcore_set_10G_XFI(phy, params, 0);
        } else {
                PMD_DRV_LOG(DEBUG, "Setting 1G Fiber");
                elink_warpcore_set_sgmii_speed(phy, params, 1, 0);
        }
}

static void elink_sfp_e3_set_transmitter(struct elink_params *params,
                                         struct elink_phy *phy, uint8_t tx_en)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t cfg_pin;
        uint8_t port = params->port;

        cfg_pin = REG_RD(sc, params->shmem_base +
                         offsetof(struct shmem_region,
                                  dev_info.port_hw_config[port].e3_sfp_ctrl)) &
            PORT_HW_CFG_E3_TX_LASER_MASK;
        /* Set the !tx_en since this pin is DISABLE_TX_LASER */
        PMD_DRV_LOG(DEBUG, "Setting WC TX to %d", tx_en);

        /* For 20G, the expected pin to be used is 3 pins after the current */
        elink_set_cfg_pin(sc, cfg_pin, tx_en ^ 1);
        if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)
                elink_set_cfg_pin(sc, cfg_pin + 3, tx_en ^ 1);
}

static void elink_warpcore_config_init(struct elink_phy *phy,
                                       struct elink_params *params,
                                       struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t serdes_net_if;
        uint8_t fiber_mode;
        uint16_t lane = elink_get_warpcore_lane(params);
        serdes_net_if = (REG_RD(sc, params->shmem_base +
                                offsetof(struct shmem_region,
                                         dev_info.port_hw_config[params->port].
                                         default_cfg)) &
                         PORT_HW_CFG_NET_SERDES_IF_MASK);
        PMD_DRV_LOG(DEBUG,
                    "Begin Warpcore init, link_speed %d, "
                    "serdes_net_if = 0x%x", vars->line_speed, serdes_net_if);
        elink_set_aer_mmd(params, phy);
        elink_warpcore_reset_lane(sc, phy, 1);
        vars->phy_flags |= PHY_XGXS_FLAG;
        if ((serdes_net_if == PORT_HW_CFG_NET_SERDES_IF_SGMII) ||
            (phy->req_line_speed &&
             ((phy->req_line_speed == ELINK_SPEED_100) ||
              (phy->req_line_speed == ELINK_SPEED_10)))) {
                vars->phy_flags |= PHY_SGMII_FLAG;
                PMD_DRV_LOG(DEBUG, "Setting SGMII mode");
                elink_warpcore_clear_regs(phy, params, lane);
                elink_warpcore_set_sgmii_speed(phy, params, 0, 1);
        } else {
                switch (serdes_net_if) {
                case PORT_HW_CFG_NET_SERDES_IF_KR:
                        /* Enable KR Auto Neg */
                        if (params->loopback_mode != ELINK_LOOPBACK_EXT)
                                elink_warpcore_enable_AN_KR(phy, params, vars);
                        else {
                                PMD_DRV_LOG(DEBUG, "Setting KR 10G-Force");
                                elink_warpcore_set_10G_KR(phy, params);
                        }
                        break;

                case PORT_HW_CFG_NET_SERDES_IF_XFI:
                        elink_warpcore_clear_regs(phy, params, lane);
                        if (vars->line_speed == ELINK_SPEED_10000) {
                                PMD_DRV_LOG(DEBUG, "Setting 10G XFI");
                                elink_warpcore_set_10G_XFI(phy, params, 1);
                        } else {
                                if (ELINK_SINGLE_MEDIA_DIRECT(params)) {
                                        PMD_DRV_LOG(DEBUG, "1G Fiber");
                                        fiber_mode = 1;
                                } else {
                                        PMD_DRV_LOG(DEBUG, "10/100/1G SGMII");
                                        fiber_mode = 0;
                                }
                                elink_warpcore_set_sgmii_speed(phy,
                                                               params,
                                                               fiber_mode, 0);
                        }

                        break;

                case PORT_HW_CFG_NET_SERDES_IF_SFI:
                        /* Issue Module detection if module is plugged, or
                         * enabled transmitter to avoid current leakage in case
                         * no module is connected
                         */
                        if ((params->loopback_mode == ELINK_LOOPBACK_NONE) ||
                            (params->loopback_mode == ELINK_LOOPBACK_EXT)) {
                                if (elink_is_sfp_module_plugged(params))
                                        elink_sfp_module_detection(phy, params);
                                else
                                        elink_sfp_e3_set_transmitter(params,
                                                                     phy, 1);
                        }

                        elink_warpcore_config_sfi(phy, params);
                        break;

                case PORT_HW_CFG_NET_SERDES_IF_DXGXS:
                        if (vars->line_speed != ELINK_SPEED_20000) {
                                PMD_DRV_LOG(DEBUG, "Speed not supported yet");
                                return;
                        }
                        PMD_DRV_LOG(DEBUG, "Setting 20G DXGXS");
                        elink_warpcore_set_20G_DXGXS(sc, phy, lane);
                        /* Issue Module detection */

                        elink_sfp_module_detection(phy, params);
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_KR2:
                        if (!params->loopback_mode) {
                                elink_warpcore_enable_AN_KR(phy, params, vars);
                        } else {
                                PMD_DRV_LOG(DEBUG, "Setting KR 20G-Force");
                                elink_warpcore_set_20G_force_KR2(phy, params);
                        }
                        break;
                default:
                        PMD_DRV_LOG(DEBUG,
                                    "Unsupported Serdes Net Interface 0x%x",
                                    serdes_net_if);
                        return;
                }
        }

        /* Take lane out of reset after configuration is finished */
        elink_warpcore_reset_lane(sc, phy, 0);
        PMD_DRV_LOG(DEBUG, "Exit config init");
}

static void elink_warpcore_link_reset(struct elink_phy *phy,
                                      struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val16, lane;
        elink_sfp_e3_set_transmitter(params, phy, 0);
        elink_set_mdio_emac_per_phy(sc, params);
        elink_set_aer_mmd(params, phy);
        /* Global register */
        elink_warpcore_reset_lane(sc, phy, 1);

        /* Clear loopback settings (if any) */
        /* 10G & 20G */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0xBFFF);

        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_IEEE0BLK_MIICNTL, 0xfffe);

        /* Update those 1-copy registers */
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, 0);
        /* Enable 1G MDIO (1-copy) */
        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~0x10);

        elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD,
                                  MDIO_WC_REG_XGXSBLK1_LANECTRL2, 0xff00);
        lane = elink_get_warpcore_lane(params);
        /* Disable CL36 PCS Tx */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
        val16 |= (0x11 << lane);
        if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
                val16 |= (0x22 << lane);
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);

        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
        val16 &= ~(0x0303 << (lane << 1));
        val16 |= (0x0101 << (lane << 1));
        if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) {
                val16 &= ~(0x0c0c << (lane << 1));
                val16 |= (0x0404 << (lane << 1));
        }

        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
        /* Restore AER */
        elink_set_aer_mmd(params, phy);

}

static void elink_set_warpcore_loopback(struct elink_phy *phy,
                                        struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val16;
        uint32_t lane;
        PMD_DRV_LOG(DEBUG, "Setting Warpcore loopback type %x, speed %d",
                    params->loopback_mode, phy->req_line_speed);

        if (phy->req_line_speed < ELINK_SPEED_10000 ||
            phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) {
                /* 10/100/1000/20G-KR2 */

                /* Update those 1-copy registers */
                CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                                  MDIO_AER_BLOCK_AER_REG, 0);
                /* Enable 1G MDIO (1-copy) */
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_XGXSBLK0_XGXSCONTROL,
                                         0x10);
                /* Set 1G loopback based on lane (1-copy) */
                lane = elink_get_warpcore_lane(params);
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16);
                val16 |= (1 << lane);
                if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)
                        val16 |= (2 << lane);
                elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                                 MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16);

                /* Switch back to 4-copy registers */
                elink_set_aer_mmd(params, phy);
        } else {
                /* 10G / 20G-DXGXS */
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
                                         0x4000);
                elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
                                         MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1);
        }
}

static void elink_sync_link(struct elink_params *params,
                            struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t link_10g_plus;
        if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
                vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
        vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
        if (vars->link_up) {
                PMD_DRV_LOG(DEBUG, "phy link up");

                vars->phy_link_up = 1;
                vars->duplex = DUPLEX_FULL;
                switch (vars->link_status & LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
                case ELINK_LINK_10THD:
                        vars->duplex = DUPLEX_HALF;
                        /* Fall thru */
                case ELINK_LINK_10TFD:
                        vars->line_speed = ELINK_SPEED_10;
                        break;

                case ELINK_LINK_100TXHD:
                        vars->duplex = DUPLEX_HALF;
                        /* Fall thru */
                case ELINK_LINK_100T4:
                case ELINK_LINK_100TXFD:
                        vars->line_speed = ELINK_SPEED_100;
                        break;

                case ELINK_LINK_1000THD:
                        vars->duplex = DUPLEX_HALF;
                        /* Fall thru */
                case ELINK_LINK_1000TFD:
                        vars->line_speed = ELINK_SPEED_1000;
                        break;

                case ELINK_LINK_2500THD:
                        vars->duplex = DUPLEX_HALF;
                        /* Fall thru */
                case ELINK_LINK_2500TFD:
                        vars->line_speed = ELINK_SPEED_2500;
                        break;

                case ELINK_LINK_10GTFD:
                        vars->line_speed = ELINK_SPEED_10000;
                        break;
                case ELINK_LINK_20GTFD:
                        vars->line_speed = ELINK_SPEED_20000;
                        break;
                default:
                        break;
                }
                vars->flow_ctrl = 0;
                if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
                        vars->flow_ctrl |= ELINK_FLOW_CTRL_TX;

                if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
                        vars->flow_ctrl |= ELINK_FLOW_CTRL_RX;

                if (!vars->flow_ctrl)
                        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;

                if (vars->line_speed &&
                    ((vars->line_speed == ELINK_SPEED_10) ||
                     (vars->line_speed == ELINK_SPEED_100))) {
                        vars->phy_flags |= PHY_SGMII_FLAG;
                } else {
                        vars->phy_flags &= ~PHY_SGMII_FLAG;
                }
                if (vars->line_speed &&
                    USES_WARPCORE(sc) && (vars->line_speed == ELINK_SPEED_1000))
                        vars->phy_flags |= PHY_SGMII_FLAG;
                /* Anything 10 and over uses the bmac */
                link_10g_plus = (vars->line_speed >= ELINK_SPEED_10000);

                if (link_10g_plus) {
                        if (USES_WARPCORE(sc))
                                vars->mac_type = ELINK_MAC_TYPE_XMAC;
                        else
                                vars->mac_type = ELINK_MAC_TYPE_BMAC;
                } else {
                        if (USES_WARPCORE(sc))
                                vars->mac_type = ELINK_MAC_TYPE_UMAC;
                        else
                                vars->mac_type = ELINK_MAC_TYPE_EMAC;
                }
        } else {                /* Link down */
                PMD_DRV_LOG(DEBUG, "phy link down");

                vars->phy_link_up = 0;

                vars->line_speed = 0;
                vars->duplex = DUPLEX_FULL;
                vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;

                /* Indicate no mac active */
                vars->mac_type = ELINK_MAC_TYPE_NONE;
                if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
                        vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
                if (vars->link_status & LINK_STATUS_SFP_TX_FAULT)
                        vars->phy_flags |= PHY_SFP_TX_FAULT_FLAG;
        }
}

void elink_link_status_update(struct elink_params *params,
                              struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t sync_offset, media_types;
        /* Update PHY configuration */
        set_phy_vars(params, vars);

        vars->link_status = REG_RD(sc, params->shmem_base +
                                   offsetof(struct shmem_region,
                                            port_mb[port].link_status));

        /* Force link UP in non LOOPBACK_EXT loopback mode(s) */
        if (params->loopback_mode != ELINK_LOOPBACK_NONE &&
            params->loopback_mode != ELINK_LOOPBACK_EXT)
                vars->link_status |= LINK_STATUS_LINK_UP;

        if (elink_eee_has_cap(params))
                vars->eee_status = REG_RD(sc, params->shmem2_base +
                                          offsetof(struct shmem2_region,
                                                   eee_status[params->port]));

        vars->phy_flags = PHY_XGXS_FLAG;
        elink_sync_link(params, vars);
        /* Sync media type */
        sync_offset = params->shmem_base +
            offsetof(struct shmem_region,
                     dev_info.port_hw_config[port].media_type);
        media_types = REG_RD(sc, sync_offset);

        params->phy[ELINK_INT_PHY].media_type =
            (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >>
            PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT;
        params->phy[ELINK_EXT_PHY1].media_type =
            (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >>
            PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT;
        params->phy[ELINK_EXT_PHY2].media_type =
            (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >>
            PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
        PMD_DRV_LOG(DEBUG, "media_types = 0x%x", media_types);

        /* Sync AEU offset */
        sync_offset = params->shmem_base +
            offsetof(struct shmem_region,
                     dev_info.port_hw_config[port].aeu_int_mask);

        vars->aeu_int_mask = REG_RD(sc, sync_offset);

        /* Sync PFC status */
        if (vars->link_status & LINK_STATUS_PFC_ENABLED)
                params->feature_config_flags |=
                    ELINK_FEATURE_CONFIG_PFC_ENABLED;
        else
                params->feature_config_flags &=
                    ~ELINK_FEATURE_CONFIG_PFC_ENABLED;

        if (SHMEM2_HAS(sc, link_attr_sync))
                vars->link_attr_sync = SHMEM2_RD(sc,
                                                 link_attr_sync[params->port]);

        PMD_DRV_LOG(DEBUG, "link_status 0x%x  phy_link_up %x int_mask 0x%x",
                    vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
        PMD_DRV_LOG(DEBUG, "line_speed %x  duplex %x  flow_ctrl 0x%x",
                    vars->line_speed, vars->duplex, vars->flow_ctrl);
}

static void elink_set_master_ln(struct elink_params *params,
                                struct elink_phy *phy)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t new_master_ln, ser_lane;
        ser_lane = ((params->lane_config &
                     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
                    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);

        /* Set the master_ln for AN */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_XGXS_BLOCK2,
                          MDIO_XGXS_BLOCK2_TEST_MODE_LANE, &new_master_ln);

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_XGXS_BLOCK2,
                          MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
                          (new_master_ln | ser_lane));
}

static elink_status_t elink_reset_unicore(struct elink_params *params,
                                          struct elink_phy *phy,
                                          uint8_t set_serdes)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t mii_control;
        uint16_t i;
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);

        /* Reset the unicore */
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL,
                          (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET));
        if (set_serdes)
                elink_set_serdes_access(sc, params->port);

        /* Wait for the reset to self clear */
        for (i = 0; i < ELINK_MDIO_ACCESS_TIMEOUT; i++) {
                DELAY(5);

                /* The reset erased the previous bank value */
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);

                if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
                        DELAY(5);
                        return ELINK_STATUS_OK;
                }
        }

        elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port);   // "Warning: PHY was not initialized,"
        // " Port %d",

        PMD_DRV_LOG(DEBUG, "BUG! XGXS is still in reset!");
        return ELINK_STATUS_ERROR;

}

static void elink_set_swap_lanes(struct elink_params *params,
                                 struct elink_phy *phy)
{
        struct bnx2x_softc *sc = params->sc;
        /* Each two bits represents a lane number:
         * No swap is 0123 => 0x1b no need to enable the swap
         */
        uint16_t rx_lane_swap, tx_lane_swap;

        rx_lane_swap = ((params->lane_config &
                         PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
                        PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
        tx_lane_swap = ((params->lane_config &
                         PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
                        PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);

        if (rx_lane_swap != 0x1b) {
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_XGXS_BLOCK2,
                                  MDIO_XGXS_BLOCK2_RX_LN_SWAP,
                                  (rx_lane_swap |
                                   MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
                                   MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
        } else {
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_XGXS_BLOCK2,
                                  MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
        }

        if (tx_lane_swap != 0x1b) {
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_XGXS_BLOCK2,
                                  MDIO_XGXS_BLOCK2_TX_LN_SWAP,
                                  (tx_lane_swap |
                                   MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
        } else {
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_XGXS_BLOCK2,
                                  MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
        }
}

static void elink_set_parallel_detection(struct elink_phy *phy,
                                         struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t control2;
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, &control2);
        if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
                control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
        else
                control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
        PMD_DRV_LOG(DEBUG, "phy->speed_cap_mask = 0x%x, control2 = 0x%x",
                    phy->speed_cap_mask, control2);
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, control2);

        if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
            (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
                PMD_DRV_LOG(DEBUG, "XGXS");

                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_10G_PARALLEL_DETECT,
                                  MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
                                  MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);

                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_10G_PARALLEL_DETECT,
                                  MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
                                  &control2);

                control2 |=
                    MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;

                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_10G_PARALLEL_DETECT,
                                  MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
                                  control2);

                /* Disable parallel detection of HiG */
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_XGXS_BLOCK2,
                                  MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
                                  MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
                                  MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
        }
}

static void elink_set_autoneg(struct elink_phy *phy,
                              struct elink_params *params,
                              struct elink_vars *vars, uint8_t enable_cl73)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t reg_val;

        /* CL37 Autoneg */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);

        /* CL37 Autoneg Enabled */
        if (vars->line_speed == ELINK_SPEED_AUTO_NEG)
                reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
        else                    /* CL37 Autoneg Disabled */
                reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
                             MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);

        /* Enable/Disable Autodetection */

        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
        reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN |
                     MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT);
        reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE;
        if (vars->line_speed == ELINK_SPEED_AUTO_NEG)
                reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
        else
                reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);

        /* Enable TetonII and BAM autoneg */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_BAM_NEXT_PAGE,
                          MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, &reg_val);
        if (vars->line_speed == ELINK_SPEED_AUTO_NEG) {
                /* Enable BAM aneg Mode and TetonII aneg Mode */
                reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
                            MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
        } else {
                /* TetonII and BAM Autoneg Disabled */
                reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
                             MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
        }
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_BAM_NEXT_PAGE,
                          MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, reg_val);

        if (enable_cl73) {
                /* Enable Cl73 FSM status bits */
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_USERB0,
                                  MDIO_CL73_USERB0_CL73_UCTRL, 0xe);

                /* Enable BAM Station Manager */
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_USERB0,
                                  MDIO_CL73_USERB0_CL73_BAM_CTRL1,
                                  MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
                                  MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN
                                  |
                                  MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);

                /* Advertise CL73 link speeds */
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB1,
                                  MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
                if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                        reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
                if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
                        reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;

                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB1,
                                  MDIO_CL73_IEEEB1_AN_ADV2, reg_val);

                /* CL73 Autoneg Enabled */
                reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;

        } else                  /* CL73 Autoneg Disabled */
                reg_val = 0;

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_CL73_IEEEB0,
                          MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
}

/* Program SerDes, forced speed */
static void elink_program_serdes(struct elink_phy *phy,
                                 struct elink_params *params,
                                 struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t reg_val;

        /* Program duplex, disable autoneg and sgmii */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
        reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
                     MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
                     MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK);
        if (phy->req_duplex == DUPLEX_FULL)
                reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);

        /* Program speed
         *  - needed only if the speed is greater than 1G (2.5G or 10G)
         */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_MISC1, &reg_val);
        /* Clearing the speed value before setting the right speed */
        PMD_DRV_LOG(DEBUG, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val);

        reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
                     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);

        if (!((vars->line_speed == ELINK_SPEED_1000) ||
              (vars->line_speed == ELINK_SPEED_100) ||
              (vars->line_speed == ELINK_SPEED_10))) {

                reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
                            MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
                if (vars->line_speed == ELINK_SPEED_10000)
                        reg_val |=
                            MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
        }

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_MISC1, reg_val);

}

static void elink_set_brcm_cl37_advertisement(struct elink_phy *phy,
                                              struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val = 0;

        /* Set extended capabilities */
        if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
                val |= MDIO_OVER_1G_UP1_2_5G;
        if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                val |= MDIO_OVER_1G_UP1_10G;
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP1, val);

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP3, 0x400);
}

static void elink_set_ieee_aneg_advertisement(struct elink_phy *phy,
                                              struct elink_params *params,
                                              uint16_t ieee_fc)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val;
        /* For AN, we are always publishing full duplex */

        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_COMBO_IEEE0,
                          MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_CL73_IEEEB1,
                          MDIO_CL73_IEEEB1_AN_ADV1, &val);
        val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH;
        val |= ((ieee_fc << 3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK);
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_CL73_IEEEB1,
                          MDIO_CL73_IEEEB1_AN_ADV1, val);
}

static void elink_restart_autoneg(struct elink_phy *phy,
                                  struct elink_params *params,
                                  uint8_t enable_cl73)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t mii_control;

        PMD_DRV_LOG(DEBUG, "elink_restart_autoneg");
        /* Enable and restart BAM/CL37 aneg */

        if (enable_cl73) {
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB0,
                                  MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
                                  &mii_control);

                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB0,
                                  MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
                                  (mii_control |
                                   MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
                                   MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
        } else {

                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
                PMD_DRV_LOG(DEBUG,
                            "elink_restart_autoneg mii_control before = 0x%x",
                            mii_control);
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_MII_CONTROL,
                                  (mii_control |
                                   MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
                                   MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
        }
}

static void elink_initialize_sgmii_process(struct elink_phy *phy,
                                           struct elink_params *params,
                                           struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t control1;

        /* In SGMII mode, the unicore is always slave */

        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &control1);
        control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
        /* Set sgmii mode (and not fiber) */
        control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
                      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
                      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, control1);

        /* If forced speed */
        if (!(vars->line_speed == ELINK_SPEED_AUTO_NEG)) {
                /* Set speed, disable autoneg */
                uint16_t mii_control;

                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
                mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
                                 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK |
                                 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);

                switch (vars->line_speed) {
                case ELINK_SPEED_100:
                        mii_control |=
                            MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
                        break;
                case ELINK_SPEED_1000:
                        mii_control |=
                            MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
                        break;
                case ELINK_SPEED_10:
                        /* There is nothing to set for 10M */
                        break;
                default:
                        /* Invalid speed for SGMII */
                        PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x",
                                    vars->line_speed);
                        break;
                }

                /* Setting the full duplex */
                if (phy->req_duplex == DUPLEX_FULL)
                        mii_control |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_MII_CONTROL, mii_control);

        } else {                /* AN mode */
                /* Enable and restart AN */
                elink_restart_autoneg(phy, params, 0);
        }
}

/* Link management
 */
static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
                                                        struct elink_params
                                                        *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t pd_10g, status2_1000x;
        if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG)
                return ELINK_STATUS_OK;
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x);
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_SERDES_DIGITAL,
                          MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x);
        if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
                PMD_DRV_LOG(DEBUG, "1G parallel detect link on port %d",
                            params->port);
                return 1;
        }

        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_10G_PARALLEL_DETECT,
                          MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g);

        if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
                PMD_DRV_LOG(DEBUG, "10G parallel detect link on port %d",
                            params->port);
                return 1;
        }
        return ELINK_STATUS_OK;
}

static void elink_update_adv_fc(struct elink_phy *phy,
                                struct elink_params *params,
                                struct elink_vars *vars, uint32_t gp_status)
{
        uint16_t ld_pause;      /* local driver */
        uint16_t lp_pause;      /* link partner */
        uint16_t pause_result;
        struct bnx2x_softc *sc = params->sc;
        if ((gp_status &
             (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
              MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) ==
            (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
             MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) {

                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB1,
                                  MDIO_CL73_IEEEB1_AN_ADV1, &ld_pause);
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB1,
                                  MDIO_CL73_IEEEB1_AN_LP_ADV1, &lp_pause);
                pause_result = (ld_pause &
                                MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8;
                pause_result |= (lp_pause &
                                 MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10;
                PMD_DRV_LOG(DEBUG, "pause_result CL73 0x%x", pause_result);
        } else {
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_AUTO_NEG_ADV, &ld_pause);
                CL22_RD_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_COMBO_IEEE0,
                                  MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
                                  &lp_pause);
                pause_result = (ld_pause &
                                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 5;
                pause_result |= (lp_pause &
                                 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 7;
                PMD_DRV_LOG(DEBUG, "pause_result CL37 0x%x", pause_result);
        }
        elink_pause_resolve(vars, pause_result);

}

static void elink_flow_ctrl_resolve(struct elink_phy *phy,
                                    struct elink_params *params,
                                    struct elink_vars *vars, uint32_t gp_status)
{
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;

        /* Resolve from gp_status in case of AN complete and not sgmii */
        if (phy->req_flow_ctrl != ELINK_FLOW_CTRL_AUTO) {
                /* Update the advertised flow-controled of LD/LP in AN */
                if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
                        elink_update_adv_fc(phy, params, vars, gp_status);
                /* But set the flow-control result as the requested one */
                vars->flow_ctrl = phy->req_flow_ctrl;
        } else if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG)
                vars->flow_ctrl = params->req_fc_auto_adv;
        else if ((gp_status & ELINK_MDIO_AN_CL73_OR_37_COMPLETE) &&
                 (!(vars->phy_flags & PHY_SGMII_FLAG))) {
                if (elink_direct_parallel_detect_used(phy, params)) {
                        vars->flow_ctrl = params->req_fc_auto_adv;
                        return;
                }
                elink_update_adv_fc(phy, params, vars, gp_status);
        }
        PMD_DRV_LOG(DEBUG, "flow_ctrl 0x%x", vars->flow_ctrl);
}

static void elink_check_fallback_to_cl37(struct elink_phy *phy,
                                         struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t rx_status, ustat_val, cl37_fsm_received;
        PMD_DRV_LOG(DEBUG, "elink_check_fallback_to_cl37");
        /* Step 1: Make sure signal is detected */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status);
        if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) !=
            (MDIO_RX0_RX_STATUS_SIGDET)) {
                PMD_DRV_LOG(DEBUG, "Signal is not detected. Restoring CL73."
                            "rx_status(0x80b0) = 0x%x", rx_status);
                CL22_WR_OVER_CL45(sc, phy,
                                  MDIO_REG_BANK_CL73_IEEEB0,
                                  MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
                                  MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN);
                return;
        }
        /* Step 2: Check CL73 state machine */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_CL73_USERB0,
                          MDIO_CL73_USERB0_CL73_USTAT1, &ustat_val);
        if ((ustat_val &
             (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
              MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) !=
            (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
             MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
                PMD_DRV_LOG(DEBUG, "CL73 state-machine is not stable. "
                            "ustat_val(0x8371) = 0x%x", ustat_val);
                return;
        }
        /* Step 3: Check CL37 Message Pages received to indicate LP
         * supports only CL37
         */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_REMOTE_PHY,
                          MDIO_REMOTE_PHY_MISC_RX_STATUS, &cl37_fsm_received);
        if ((cl37_fsm_received &
             (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
              MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
            (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
             MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
                PMD_DRV_LOG(DEBUG, "No CL37 FSM were received. "
                            "misc_rx_status(0x8330) = 0x%x", cl37_fsm_received);
                return;
        }
        /* The combined cl37/cl73 fsm state information indicating that
         * we are connected to a device which does not support cl73, but
         * does support cl37 BAM. In this case we disable cl73 and
         * restart cl37 auto-neg
         */

        /* Disable CL73 */
        CL22_WR_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_CL73_IEEEB0,
                          MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0);
        /* Restart CL37 autoneg */
        elink_restart_autoneg(phy, params, 0);
        PMD_DRV_LOG(DEBUG, "Disabling CL73, and restarting CL37 autoneg");
}

static void elink_xgxs_an_resolve(struct elink_phy *phy,
                                  struct elink_params *params,
                                  struct elink_vars *vars, uint32_t gp_status)
{
        if (gp_status & ELINK_MDIO_AN_CL73_OR_37_COMPLETE)
                vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;

        if (elink_direct_parallel_detect_used(phy, params))
                vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED;
}

static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
                                                  struct elink_params *params __rte_unused,
                                                  struct elink_vars *vars,
                                                  uint16_t is_link_up,
                                                  uint16_t speed_mask,
                                                  uint16_t is_duplex)
{
        if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
                vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
        if (is_link_up) {
                PMD_DRV_LOG(DEBUG, "phy link up");

                vars->phy_link_up = 1;
                vars->link_status |= LINK_STATUS_LINK_UP;

                switch (speed_mask) {
                case ELINK_GP_STATUS_10M:
                        vars->line_speed = ELINK_SPEED_10;
                        if (is_duplex == DUPLEX_FULL)
                                vars->link_status |= ELINK_LINK_10TFD;
                        else
                                vars->link_status |= ELINK_LINK_10THD;
                        break;

                case ELINK_GP_STATUS_100M:
                        vars->line_speed = ELINK_SPEED_100;
                        if (is_duplex == DUPLEX_FULL)
                                vars->link_status |= ELINK_LINK_100TXFD;
                        else
                                vars->link_status |= ELINK_LINK_100TXHD;
                        break;

                case ELINK_GP_STATUS_1G:
                case ELINK_GP_STATUS_1G_KX:
                        vars->line_speed = ELINK_SPEED_1000;
                        if (is_duplex == DUPLEX_FULL)
                                vars->link_status |= ELINK_LINK_1000TFD;
                        else
                                vars->link_status |= ELINK_LINK_1000THD;
                        break;

                case ELINK_GP_STATUS_2_5G:
                        vars->line_speed = ELINK_SPEED_2500;
                        if (is_duplex == DUPLEX_FULL)
                                vars->link_status |= ELINK_LINK_2500TFD;
                        else
                                vars->link_status |= ELINK_LINK_2500THD;
                        break;

                case ELINK_GP_STATUS_5G:
                case ELINK_GP_STATUS_6G:
                        PMD_DRV_LOG(DEBUG,
                                    "link speed unsupported  gp_status 0x%x",
                                    speed_mask);
                        return ELINK_STATUS_ERROR;

                case ELINK_GP_STATUS_10G_KX4:
                case ELINK_GP_STATUS_10G_HIG:
                case ELINK_GP_STATUS_10G_CX4:
                case ELINK_GP_STATUS_10G_KR:
                case ELINK_GP_STATUS_10G_SFI:
                case ELINK_GP_STATUS_10G_XFI:
                        vars->line_speed = ELINK_SPEED_10000;
                        vars->link_status |= ELINK_LINK_10GTFD;
                        break;
                case ELINK_GP_STATUS_20G_DXGXS:
                case ELINK_GP_STATUS_20G_KR2:
                        vars->line_speed = ELINK_SPEED_20000;
                        vars->link_status |= ELINK_LINK_20GTFD;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG,
                                    "link speed unsupported gp_status 0x%x",
                                    speed_mask);
                        return ELINK_STATUS_ERROR;
                }
        } else {                /* link_down */
                PMD_DRV_LOG(DEBUG, "phy link down");

                vars->phy_link_up = 0;

                vars->duplex = DUPLEX_FULL;
                vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
                vars->mac_type = ELINK_MAC_TYPE_NONE;
        }
        PMD_DRV_LOG(DEBUG, " phy_link_up %x line_speed %d",
                    vars->phy_link_up, vars->line_speed);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_link_settings_status(struct elink_phy *phy,
                                                 struct elink_params *params,
                                                 struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;

        uint16_t gp_status, duplex = DUPLEX_HALF, link_up = 0, speed_mask;
        elink_status_t rc = ELINK_STATUS_OK;

        /* Read gp_status */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_GP_STATUS,
                          MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status);
        if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
                duplex = DUPLEX_FULL;
        if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)
                link_up = 1;
        speed_mask = gp_status & ELINK_GP_STATUS_SPEED_MASK;
        PMD_DRV_LOG(DEBUG, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x",
                    gp_status, link_up, speed_mask);
        rc = elink_get_link_speed_duplex(phy, params, vars, link_up, speed_mask,
                                         duplex);
        if (rc == ELINK_STATUS_ERROR)
                return rc;

        if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
                if (ELINK_SINGLE_MEDIA_DIRECT(params)) {
                        vars->duplex = duplex;
                        elink_flow_ctrl_resolve(phy, params, vars, gp_status);
                        if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
                                elink_xgxs_an_resolve(phy, params, vars,
                                                      gp_status);
                }
        } else {                /* Link_down */
                if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
                    ELINK_SINGLE_MEDIA_DIRECT(params)) {
                        /* Check signal is detected */
                        elink_check_fallback_to_cl37(phy, params);
                }
        }

        /* Read LP advertised speeds */
        if (ELINK_SINGLE_MEDIA_DIRECT(params) &&
            (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)) {
                uint16_t val;

                CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_CL73_IEEEB1,
                                  MDIO_CL73_IEEEB1_AN_LP_ADV2, &val);

                if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX)
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
                if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 |
                           MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;

                CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_OVER_1G,
                                  MDIO_OVER_1G_LP_UP1, &val);

                if (val & MDIO_OVER_1G_UP1_2_5G)
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
                if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
        }

        PMD_DRV_LOG(DEBUG, "duplex %x  flow_ctrl 0x%x link_status 0x%x",
                    vars->duplex, vars->flow_ctrl, vars->link_status);
        return rc;
}

static elink_status_t elink_warpcore_read_status(struct elink_phy *phy,
                                                 struct elink_params *params,
                                                 struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t lane;
        uint16_t gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL;
        elink_status_t rc = ELINK_STATUS_OK;
        lane = elink_get_warpcore_lane(params);
        /* Read gp_status */
        if ((params->loopback_mode) && (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)) {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
                link_up &= 0x1;
        } else if ((phy->req_line_speed > ELINK_SPEED_10000) &&
                   (phy->supported & ELINK_SUPPORTED_20000baseMLD2_Full)) {
                uint16_t temp_link_up;
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &temp_link_up);
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &link_up);
                PMD_DRV_LOG(DEBUG, "PCS RX link status = 0x%x-->0x%x",
                            temp_link_up, link_up);
                link_up &= (1 << 2);
                if (link_up)
                        elink_ext_phy_resolve_fc(phy, params, vars);
        } else {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1);
                PMD_DRV_LOG(DEBUG, "0x81d1 = 0x%x", gp_status1);
                /* Check for either KR, 1G, or AN up. */
                link_up = ((gp_status1 >> 8) |
                           (gp_status1 >> 12) | (gp_status1)) & (1 << lane);
                if (phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) {
                        uint16_t an_link;
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_STATUS, &an_link);
                        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                        MDIO_AN_REG_STATUS, &an_link);
                        link_up |= (an_link & (1 << 2));
                }
                if (link_up && ELINK_SINGLE_MEDIA_DIRECT(params)) {
                        uint16_t pd, gp_status4;
                        if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) {
                                /* Check Autoneg complete */
                                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                                MDIO_WC_REG_GP2_STATUS_GP_2_4,
                                                &gp_status4);
                                if (gp_status4 & ((1 << 12) << lane))
                                        vars->link_status |=
                                            LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;

                                /* Check parallel detect used */
                                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                                MDIO_WC_REG_PAR_DET_10G_STATUS,
                                                &pd);
                                if (pd & (1 << 15))
                                        vars->link_status |=
                                            LINK_STATUS_PARALLEL_DETECTION_USED;
                        }
                        elink_ext_phy_resolve_fc(phy, params, vars);
                        vars->duplex = duplex;
                }
        }

        if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) &&
            ELINK_SINGLE_MEDIA_DIRECT(params)) {
                uint16_t val;

                elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                MDIO_AN_REG_LP_AUTO_NEG2, &val);

                if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX)
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
                if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 |
                           MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;

                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_DIGITAL3_LP_UP1, &val);

                if (val & MDIO_OVER_1G_UP1_2_5G)
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE;
                if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;

        }

        if (lane < 2) {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed);
        } else {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed);
        }
        PMD_DRV_LOG(DEBUG, "lane %d gp_speed 0x%x", lane, gp_speed);

        if ((lane & 1) == 0)
                gp_speed <<= 8;
        gp_speed &= 0x3f00;
        link_up = ! !link_up;

        /* Reset the TX FIFO to fix SGMII issue */
        rc = elink_get_link_speed_duplex(phy, params, vars, link_up, gp_speed,
                                         duplex);

        /* In case of KR link down, start up the recovering procedure */
        if ((!link_up) && (phy->media_type == ELINK_ETH_PHY_KR) &&
            (!(phy->flags & ELINK_FLAGS_WC_DUAL_MODE)))
                vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;

        PMD_DRV_LOG(DEBUG, "duplex %x  flow_ctrl 0x%x link_status 0x%x",
                    vars->duplex, vars->flow_ctrl, vars->link_status);
        return rc;
}

static void elink_set_gmii_tx_driver(struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        struct elink_phy *phy = &params->phy[ELINK_INT_PHY];
        uint16_t lp_up2;
        uint16_t tx_driver;
        uint16_t bank;

        /* Read precomp */
        CL22_RD_OVER_CL45(sc, phy,
                          MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_LP_UP2, &lp_up2);

        /* Bits [10:7] at lp_up2, positioned at [15:12] */
        lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
                   MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
                  MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);

        if (lp_up2 == 0)
                return;

        for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3;
             bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
                CL22_RD_OVER_CL45(sc, phy,
                                  bank, MDIO_TX0_TX_DRIVER, &tx_driver);

                /* Replace tx_driver bits [15:12] */
                if (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
                        tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
                        tx_driver |= lp_up2;
                        CL22_WR_OVER_CL45(sc, phy,
                                          bank, MDIO_TX0_TX_DRIVER, tx_driver);
                }
        }
}

static elink_status_t elink_emac_program(struct elink_params *params,
                                         struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint16_t mode = 0;

        PMD_DRV_LOG(DEBUG, "setting link speed & duplex");
        elink_bits_dis(sc, GRCBASE_EMAC0 + port * 0x400 +
                       EMAC_REG_EMAC_MODE,
                       (EMAC_MODE_25G_MODE |
                        EMAC_MODE_PORT_MII_10M | EMAC_MODE_HALF_DUPLEX));
        switch (vars->line_speed) {
        case ELINK_SPEED_10:
                mode |= EMAC_MODE_PORT_MII_10M;
                break;

        case ELINK_SPEED_100:
                mode |= EMAC_MODE_PORT_MII;
                break;

        case ELINK_SPEED_1000:
                mode |= EMAC_MODE_PORT_GMII;
                break;

        case ELINK_SPEED_2500:
                mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
                break;

        default:
                /* 10G not valid for EMAC */
                PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", vars->line_speed);
                return ELINK_STATUS_ERROR;
        }

        if (vars->duplex == DUPLEX_HALF)
                mode |= EMAC_MODE_HALF_DUPLEX;
        elink_bits_en(sc,
                      GRCBASE_EMAC0 + port * 0x400 + EMAC_REG_EMAC_MODE, mode);

        elink_set_led(params, vars, ELINK_LED_MODE_OPER, vars->line_speed);
        return ELINK_STATUS_OK;
}

static void elink_set_preemphasis(struct elink_phy *phy,
                                  struct elink_params *params)
{

        uint16_t bank, i = 0;
        struct bnx2x_softc *sc = params->sc;

        for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3;
             bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0), i++) {
                CL22_WR_OVER_CL45(sc, phy,
                                  bank,
                                  MDIO_RX0_RX_EQ_BOOST, phy->rx_preemphasis[i]);
        }

        for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3;
             bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) {
                CL22_WR_OVER_CL45(sc, phy,
                                  bank,
                                  MDIO_TX0_TX_DRIVER, phy->tx_preemphasis[i]);
        }
}

static void elink_xgxs_config_init(struct elink_phy *phy,
                                   struct elink_params *params,
                                   struct elink_vars *vars)
{
        uint8_t enable_cl73 = (ELINK_SINGLE_MEDIA_DIRECT(params) ||
                               (params->loopback_mode == ELINK_LOOPBACK_XGXS));

        if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
                if (ELINK_SINGLE_MEDIA_DIRECT(params) &&
                    (params->feature_config_flags &
                     ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED))
                        elink_set_preemphasis(phy, params);

                /* Forced speed requested? */
                if (vars->line_speed != ELINK_SPEED_AUTO_NEG ||
                    (ELINK_SINGLE_MEDIA_DIRECT(params) &&
                     params->loopback_mode == ELINK_LOOPBACK_EXT)) {
                        PMD_DRV_LOG(DEBUG, "not SGMII, no AN");

                        /* Disable autoneg */
                        elink_set_autoneg(phy, params, vars, 0);

                        /* Program speed and duplex */
                        elink_program_serdes(phy, params, vars);

                } else {        /* AN_mode */
                        PMD_DRV_LOG(DEBUG, "not SGMII, AN");

                        /* AN enabled */
                        elink_set_brcm_cl37_advertisement(phy, params);

                        /* Program duplex & pause advertisement (for aneg) */
                        elink_set_ieee_aneg_advertisement(phy, params,
                                                          vars->ieee_fc);

                        /* Enable autoneg */
                        elink_set_autoneg(phy, params, vars, enable_cl73);

                        /* Enable and restart AN */
                        elink_restart_autoneg(phy, params, enable_cl73);
                }

        } else {                /* SGMII mode */
                PMD_DRV_LOG(DEBUG, "SGMII");

                elink_initialize_sgmii_process(phy, params, vars);
        }
}

static elink_status_t elink_prepare_xgxs(struct elink_phy *phy,
                                         struct elink_params *params,
                                         struct elink_vars *vars)
{
        elink_status_t rc;
        vars->phy_flags |= PHY_XGXS_FLAG;
        if ((phy->req_line_speed &&
             ((phy->req_line_speed == ELINK_SPEED_100) ||
              (phy->req_line_speed == ELINK_SPEED_10))) ||
            (!phy->req_line_speed &&
             (phy->speed_cap_mask >=
              PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
             (phy->speed_cap_mask <
              PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
            (phy->type == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD))
                vars->phy_flags |= PHY_SGMII_FLAG;
        else
                vars->phy_flags &= ~PHY_SGMII_FLAG;

        elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
        elink_set_aer_mmd(params, phy);
        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
                elink_set_master_ln(params, phy);

        rc = elink_reset_unicore(params, phy, 0);
        /* Reset the SerDes and wait for reset bit return low */
        if (rc != ELINK_STATUS_OK)
                return rc;

        elink_set_aer_mmd(params, phy);
        /* Setting the masterLn_def again after the reset */
        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
                elink_set_master_ln(params, phy);
                elink_set_swap_lanes(params, phy);
        }

        return rc;
}

static uint16_t elink_wait_reset_complete(struct bnx2x_softc *sc,
                                          struct elink_phy *phy,
                                          struct elink_params *params)
{
        uint16_t cnt, ctrl;
        /* Wait for soft reset to get cleared up to 1 sec */
        for (cnt = 0; cnt < 1000; cnt++) {
                if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
                        elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &ctrl);
                else
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_CTRL, &ctrl);
                if (!(ctrl & (1 << 15)))
                        break;
                DELAY(1000 * 1);
        }

        if (cnt == 1000)
                elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port);   // "Warning: PHY was not initialized,"
        // " Port %d",

        PMD_DRV_LOG(DEBUG, "control reg 0x%x (after %d ms)", ctrl, cnt);
        return cnt;
}

static void elink_link_int_enable(struct elink_params *params)
{
        uint8_t port = params->port;
        uint32_t mask;
        struct bnx2x_softc *sc = params->sc;

        /* Setting the status to report on link up for either XGXS or SerDes */
        if (CHIP_IS_E3(sc)) {
                mask = ELINK_NIG_MASK_XGXS0_LINK_STATUS;
                if (!(ELINK_SINGLE_MEDIA_DIRECT(params)))
                        mask |= ELINK_NIG_MASK_MI_INT;
        } else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) {
                mask = (ELINK_NIG_MASK_XGXS0_LINK10G |
                        ELINK_NIG_MASK_XGXS0_LINK_STATUS);
                PMD_DRV_LOG(DEBUG, "enabled XGXS interrupt");
                if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
                    params->phy[ELINK_INT_PHY].type !=
                    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) {
                        mask |= ELINK_NIG_MASK_MI_INT;
                        PMD_DRV_LOG(DEBUG, "enabled external phy int");
                }

        } else {                /* SerDes */
                mask = ELINK_NIG_MASK_SERDES0_LINK_STATUS;
                PMD_DRV_LOG(DEBUG, "enabled SerDes interrupt");
                if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
                    params->phy[ELINK_INT_PHY].type !=
                    PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) {
                        mask |= ELINK_NIG_MASK_MI_INT;
                        PMD_DRV_LOG(DEBUG, "enabled external phy int");
                }
        }
        elink_bits_en(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, mask);

        PMD_DRV_LOG(DEBUG, "port %x, is_xgxs %x, int_status 0x%x", port,
                    (params->switch_cfg == ELINK_SWITCH_CFG_10G),
                    REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
        PMD_DRV_LOG(DEBUG, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x",
                    REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
                    REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18),
                    REG_RD(sc,
                           NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
        PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x",
                    REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
                    REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
}

static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port,
                                     uint8_t exp_mi_int)
{
        uint32_t latch_status = 0;

        /* Disable the MI INT ( external phy int ) by writing 1 to the
         * status register. Link down indication is high-active-signal,
         * so in this case we need to write the status to clear the XOR
         */
        /* Read Latched signals */
        latch_status = REG_RD(sc, NIG_REG_LATCH_STATUS_0 + port * 8);
        PMD_DRV_LOG(DEBUG, "latch_status = 0x%x", latch_status);
        /* Handle only those with latched-signal=up. */
        if (exp_mi_int)
                elink_bits_en(sc,
                              NIG_REG_STATUS_INTERRUPT_PORT0
                              + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT);
        else
                elink_bits_dis(sc,
                               NIG_REG_STATUS_INTERRUPT_PORT0
                               + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT);

        if (latch_status & 1) {

                /* For all latched-signal=up : Re-Arm Latch signals */
                REG_WR(sc, NIG_REG_LATCH_STATUS_0 + port * 8,
                       (latch_status & 0xfffe) | (latch_status & 1));
        }
        /* For all latched-signal=up,Write original_signal to status */
}

static void elink_link_int_ack(struct elink_params *params,
                               struct elink_vars *vars, uint8_t is_10g_plus)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;
        uint32_t mask;
        /* First reset all status we assume only one line will be
         * change at a time
         */
        elink_bits_dis(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4,
                       (ELINK_NIG_STATUS_XGXS0_LINK10G |
                        ELINK_NIG_STATUS_XGXS0_LINK_STATUS |
                        ELINK_NIG_STATUS_SERDES0_LINK_STATUS));
        if (vars->phy_link_up) {
                if (USES_WARPCORE(sc))
                        mask = ELINK_NIG_STATUS_XGXS0_LINK_STATUS;
                else {
                        if (is_10g_plus)
                                mask = ELINK_NIG_STATUS_XGXS0_LINK10G;
                        else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) {
                                /* Disable the link interrupt by writing 1 to
                                 * the relevant lane in the status register
                                 */
                                uint32_t ser_lane =
                                    ((params->lane_config &
                                      PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
                                     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
                                mask = ((1 << ser_lane) <<
                                        ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE);
                        } else
                                mask = ELINK_NIG_STATUS_SERDES0_LINK_STATUS;
                }
                PMD_DRV_LOG(DEBUG, "Ack link up interrupt with mask 0x%x",
                            mask);
                elink_bits_en(sc,
                              NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, mask);
        }
}

static elink_status_t elink_format_ver(uint32_t num, uint8_t * str,
                                       uint16_t * len)
{
        uint8_t *str_ptr = str;
        uint32_t mask = 0xf0000000;
        uint8_t shift = 8 * 4;
        uint8_t digit;
        uint8_t remove_leading_zeros = 1;
        if (*len < 10) {
                /* Need more than 10chars for this format */
                *str_ptr = '\0';
                (*len)--;
                return ELINK_STATUS_ERROR;
        }
        while (shift > 0) {

                shift -= 4;
                digit = ((num & mask) >> shift);
                if (digit == 0 && remove_leading_zeros) {
                        mask = mask >> 4;
                        continue;
                } else if (digit < 0xa)
                        *str_ptr = digit + '0';
                else
                        *str_ptr = digit - 0xa + 'a';
                remove_leading_zeros = 0;
                str_ptr++;
                (*len)--;
                mask = mask >> 4;
                if (shift == 4 * 4) {
                        *str_ptr = '.';
                        str_ptr++;
                        (*len)--;
                        remove_leading_zeros = 1;
                }
        }
        return ELINK_STATUS_OK;
}

static elink_status_t elink_null_format_ver(__rte_unused uint32_t spirom_ver,
                                            uint8_t * str, uint16_t * len)
{
        str[0] = '\0';
        (*len)--;
        return ELINK_STATUS_OK;
}

static void elink_set_xgxs_loopback(struct elink_phy *phy,
                                    struct elink_params *params)
{
        uint8_t port = params->port;
        struct bnx2x_softc *sc = params->sc;

        if (phy->req_line_speed != ELINK_SPEED_1000) {
                uint32_t md_devad = 0;

                PMD_DRV_LOG(DEBUG, "XGXS 10G loopback enable");

                if (!CHIP_IS_E3(sc)) {
                        /* Change the uni_phy_addr in the nig */
                        md_devad = REG_RD(sc, (NIG_REG_XGXS0_CTRL_MD_DEVAD +
                                               port * 0x18));

                        REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + port * 0x18,
                               0x5);
                }

                elink_cl45_write(sc, phy,
                                 5,
                                 (MDIO_REG_BANK_AER_BLOCK +
                                  (MDIO_AER_BLOCK_AER_REG & 0xf)), 0x2800);

                elink_cl45_write(sc, phy,
                                 5,
                                 (MDIO_REG_BANK_CL73_IEEEB0 +
                                  (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
                                 0x6041);
                DELAY(1000 * 200);
                /* Set aer mmd back */
                elink_set_aer_mmd(params, phy);

                if (!CHIP_IS_E3(sc)) {
                        /* And md_devad */
                        REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + port * 0x18,
                               md_devad);
                }
        } else {
                uint16_t mii_ctrl;
                PMD_DRV_LOG(DEBUG, "XGXS 1G loopback enable");
                elink_cl45_read(sc, phy, 5,
                                (MDIO_REG_BANK_COMBO_IEEE0 +
                                 (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
                                &mii_ctrl);
                elink_cl45_write(sc, phy, 5,
                                 (MDIO_REG_BANK_COMBO_IEEE0 +
                                  (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
                                 mii_ctrl |
                                 MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK);
        }
}

elink_status_t elink_set_led(struct elink_params *params,
                             struct elink_vars *vars, uint8_t mode,
                             uint32_t speed)
{
        uint8_t port = params->port;
        uint16_t hw_led_mode = params->hw_led_mode;
        elink_status_t rc = ELINK_STATUS_OK;
        uint8_t phy_idx;
        uint32_t tmp;
        uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "elink_set_led: port %x, mode %d", port, mode);
        PMD_DRV_LOG(DEBUG, "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode);
        /* In case */
        for (phy_idx = ELINK_EXT_PHY1; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
                if (params->phy[phy_idx].set_link_led) {
                        params->phy[phy_idx].set_link_led(&params->phy[phy_idx],
                                                          params, mode);
                }
        }
#ifdef ELINK_INCLUDE_EMUL
        if (params->feature_config_flags &
            ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC)
                return rc;
#endif

        switch (mode) {
        case ELINK_LED_MODE_FRONT_PANEL_OFF:
        case ELINK_LED_MODE_OFF:
                REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 0);
                REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4,
                       SHARED_HW_CFG_LED_MAC1);

                tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED);
                if (params->phy[ELINK_EXT_PHY1].type ==
                    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
                        tmp &= ~(EMAC_LED_1000MB_OVERRIDE |
                                 EMAC_LED_100MB_OVERRIDE |
                                 EMAC_LED_10MB_OVERRIDE);
                else
                        tmp |= EMAC_LED_OVERRIDE;

                elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED, tmp);
                break;

        case ELINK_LED_MODE_OPER:
                /* For all other phys, OPER mode is same as ON, so in case
                 * link is down, do nothing
                 */
                if (!vars->link_up)
                        break;
        case ELINK_LED_MODE_ON:
                if (((params->phy[ELINK_EXT_PHY1].type ==
                      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727) ||
                     (params->phy[ELINK_EXT_PHY1].type ==
                      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722)) &&
                    CHIP_IS_E2(sc) && params->num_phys == 2) {
                        /* This is a work-around for E2+8727 Configurations */
                        if (mode == ELINK_LED_MODE_ON ||
                            speed == ELINK_SPEED_10000) {
                                REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
                                REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1);

                                tmp =
                                    elink_cb_reg_read(sc,
                                                      emac_base +
                                                      EMAC_REG_EMAC_LED);
                                elink_cb_reg_write(sc,
                                                   emac_base +
                                                   EMAC_REG_EMAC_LED,
                                                   (tmp | EMAC_LED_OVERRIDE));
                                /* Return here without enabling traffic
                                 * LED blink and setting rate in ON mode.
                                 * In oper mode, enabling LED blink
                                 * and setting rate is needed.
                                 */
                                if (mode == ELINK_LED_MODE_ON)
                                        return rc;
                        }
                } else if (ELINK_SINGLE_MEDIA_DIRECT(params)) {
                        /* This is a work-around for HW issue found when link
                         * is up in CL73
                         */
                        if ((!CHIP_IS_E3(sc)) ||
                            (CHIP_IS_E3(sc) && mode == ELINK_LED_MODE_ON))
                                REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1);

                        if (CHIP_IS_E1x(sc) ||
                            CHIP_IS_E2(sc) || (mode == ELINK_LED_MODE_ON))
                                REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
                        else
                                REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4,
                                       hw_led_mode);
                } else if ((params->phy[ELINK_EXT_PHY1].type ==
                            PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) &&
                           (mode == ELINK_LED_MODE_ON)) {
                        REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0);
                        tmp =
                            elink_cb_reg_read(sc,
                                              emac_base + EMAC_REG_EMAC_LED);
                        elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED,
                                           tmp | EMAC_LED_OVERRIDE |
                                           EMAC_LED_1000MB_OVERRIDE);
                        /* Break here; otherwise, it'll disable the
                         * intended override.
                         */
                        break;
                } else {
                        uint32_t nig_led_mode = ((params->hw_led_mode <<
                                                  SHARED_HW_CFG_LED_MODE_SHIFT)
                                                 ==
                                                 SHARED_HW_CFG_LED_EXTPHY2)
                            ? (SHARED_HW_CFG_LED_PHY1 >>
                               SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode;
                        REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4,
                               nig_led_mode);
                }

                REG_WR(sc, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port * 4,
                       0);
                /* Set blinking rate to ~15.9Hz */
                if (CHIP_IS_E3(sc))
                        REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port * 4,
                               LED_BLINK_RATE_VAL_E3);
                else
                        REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port * 4,
                               LED_BLINK_RATE_VAL_E1X_E2);
                REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port * 4, 1);
                tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED);
                elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED,
                                   (tmp & (~EMAC_LED_OVERRIDE)));

                break;

        default:
                rc = ELINK_STATUS_ERROR;
                PMD_DRV_LOG(DEBUG, "elink_set_led: Invalid led mode %d", mode);
                break;
        }
        return rc;

}

static elink_status_t elink_link_initialize(struct elink_params *params,
                                            struct elink_vars *vars)
{
        elink_status_t rc = ELINK_STATUS_OK;
        uint8_t phy_index, non_ext_phy;
        struct bnx2x_softc *sc = params->sc;
        /* In case of external phy existence, the line speed would be the
         * line speed linked up by the external phy. In case it is direct
         * only, then the line_speed during initialization will be
         * equal to the req_line_speed
         */
        vars->line_speed = params->phy[ELINK_INT_PHY].req_line_speed;

        /* Initialize the internal phy in case this is a direct board
         * (no external phys), or this board has external phy which requires
         * to first.
         */
        if (!USES_WARPCORE(sc))
                elink_prepare_xgxs(&params->phy[ELINK_INT_PHY], params, vars);
        /* init ext phy and enable link state int */
        non_ext_phy = (ELINK_SINGLE_MEDIA_DIRECT(params) ||
                       (params->loopback_mode == ELINK_LOOPBACK_XGXS));

        if (non_ext_phy ||
            (params->phy[ELINK_EXT_PHY1].flags & ELINK_FLAGS_INIT_XGXS_FIRST) ||
            (params->loopback_mode == ELINK_LOOPBACK_EXT_PHY)) {
                struct elink_phy *phy = &params->phy[ELINK_INT_PHY];
                if (vars->line_speed == ELINK_SPEED_AUTO_NEG &&
                    (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc)))
                        elink_set_parallel_detection(phy, params);
                if (params->phy[ELINK_INT_PHY].config_init)
                        params->phy[ELINK_INT_PHY].config_init(phy,
                                                               params, vars);
        }

        /* Re-read this value in case it was changed inside config_init due to
         * limitations of optic module
         */
        vars->line_speed = params->phy[ELINK_INT_PHY].req_line_speed;

        /* Init external phy */
        if (non_ext_phy) {
                if (params->phy[ELINK_INT_PHY].supported &
                    ELINK_SUPPORTED_FIBRE)
                        vars->link_status |= LINK_STATUS_SERDES_LINK;
        } else {
                for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
                     phy_index++) {
                        /* No need to initialize second phy in case of first
                         * phy only selection. In case of second phy, we do
                         * need to initialize the first phy, since they are
                         * connected.
                         */
                        if (params->phy[phy_index].supported &
                            ELINK_SUPPORTED_FIBRE)
                                vars->link_status |= LINK_STATUS_SERDES_LINK;

                        if (phy_index == ELINK_EXT_PHY2 &&
                            (elink_phy_selection(params) ==
                             PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
                                PMD_DRV_LOG(DEBUG,
                                            "Not initializing second phy");
                                continue;
                        }
                        params->phy[phy_index].config_init(&params->
                                                           phy[phy_index],
                                                           params, vars);
                }
        }
        /* Reset the interrupt indication after phy was initialized */
        elink_bits_dis(sc, NIG_REG_STATUS_INTERRUPT_PORT0 +
                       params->port * 4,
                       (ELINK_NIG_STATUS_XGXS0_LINK10G |
                        ELINK_NIG_STATUS_XGXS0_LINK_STATUS |
                        ELINK_NIG_STATUS_SERDES0_LINK_STATUS |
                        ELINK_NIG_MASK_MI_INT));
        return rc;
}

static void elink_int_link_reset(__rte_unused struct elink_phy *phy,
                                 struct elink_params *params)
{
        /* Reset the SerDes/XGXS */
        REG_WR(params->sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
               (0x1ff << (params->port * 16)));
}

static void elink_common_ext_link_reset(__rte_unused struct elink_phy *phy,
                                        struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t gpio_port;
        /* HW reset */
        if (CHIP_IS_E2(sc))
                gpio_port = SC_PATH(sc);
        else
                gpio_port = params->port;
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
        PMD_DRV_LOG(DEBUG, "reset external PHY");
}

static elink_status_t elink_update_link_down(struct elink_params *params,
                                             struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port = params->port;

        PMD_DRV_LOG(DEBUG, "Port %x: Link is down", port);
        elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0);
        vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG;
        /* Indicate no mac active */
        vars->mac_type = ELINK_MAC_TYPE_NONE;

        /* Update shared memory */
        vars->link_status &= ~ELINK_LINK_UPDATE_MASK;
        vars->line_speed = 0;
        elink_update_mng(params, vars->link_status);

        /* Activate nig drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 1);

        /* Disable emac */
        if (!CHIP_IS_E3(sc))
                REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0);

        DELAY(1000 * 10);
        /* Reset BigMac/Xmac */
        if (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))
                elink_set_bmac_rx(sc, params->port, 0);

        if (CHIP_IS_E3(sc)) {
                /* Prevent LPI Generation by chip */
                REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2),
                       0);
                REG_WR(sc, MISC_REG_CPMU_LP_MASK_ENT_P0 + (params->port << 2),
                       0);
                vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK |
                                      SHMEM_EEE_ACTIVE_BIT);

                elink_update_mng_eee(params, vars->eee_status);
                elink_set_xmac_rxtx(params, 0);
                elink_set_umac_rxtx(params, 0);
        }

        return ELINK_STATUS_OK;
}

static elink_status_t elink_update_link_up(struct elink_params *params,
                                           struct elink_vars *vars,
                                           uint8_t link_10g)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t phy_idx, port = params->port;
        elink_status_t rc = ELINK_STATUS_OK;

        vars->link_status |= (LINK_STATUS_LINK_UP |
                              LINK_STATUS_PHYSICAL_LINK_FLAG);
        vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;

        if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)
                vars->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED;

        if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)
                vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
        if (USES_WARPCORE(sc)) {
                if (link_10g) {
                        if (elink_xmac_enable(params, vars, 0) ==
                            ELINK_STATUS_NO_LINK) {
                                PMD_DRV_LOG(DEBUG, "Found errors on XMAC");
                                vars->link_up = 0;
                                vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
                                vars->link_status &= ~LINK_STATUS_LINK_UP;
                        }
                } else
                        elink_umac_enable(params, vars, 0);
                elink_set_led(params, vars,
                              ELINK_LED_MODE_OPER, vars->line_speed);

                if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) &&
                    (vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) {
                        PMD_DRV_LOG(DEBUG, "Enabling LPI assertion");
                        REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 +
                               (params->port << 2), 1);
                        REG_WR(sc, MISC_REG_CPMU_LP_DR_ENABLE, 1);
                        REG_WR(sc, MISC_REG_CPMU_LP_MASK_ENT_P0 +
                               (params->port << 2), 0xfc20);
                }
        }
        if ((CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))) {
                if (link_10g) {
                        if (elink_bmac_enable(params, vars, 0, 1) ==
                            ELINK_STATUS_NO_LINK) {
                                PMD_DRV_LOG(DEBUG, "Found errors on BMAC");
                                vars->link_up = 0;
                                vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
                                vars->link_status &= ~LINK_STATUS_LINK_UP;
                        }

                        elink_set_led(params, vars,
                                      ELINK_LED_MODE_OPER, ELINK_SPEED_10000);
                } else {
                        rc = elink_emac_program(params, vars);
                        elink_emac_enable(params, vars, 0);

                        /* AN complete? */
                        if ((vars->link_status &
                             LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)
                            && (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
                            ELINK_SINGLE_MEDIA_DIRECT(params))
                                elink_set_gmii_tx_driver(params);
                }
        }

        /* PBF - link up */
        if (CHIP_IS_E1x(sc))
                rc |= elink_pbf_update(params, vars->flow_ctrl,
                                       vars->line_speed);

        /* Disable drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 0);

        /* Update shared memory */
        elink_update_mng(params, vars->link_status);
        elink_update_mng_eee(params, vars->eee_status);
        /* Check remote fault */
        for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
                if (params->phy[phy_idx].flags & ELINK_FLAGS_TX_ERROR_CHECK) {
                        elink_check_half_open_conn(params, vars, 0);
                        break;
                }
        }
        DELAY(1000 * 20);
        return rc;
}

/* The elink_link_update function should be called upon link
 * interrupt.
 * Link is considered up as follows:
 * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs
 *   to be up
 * - SINGLE_MEDIA - The link between the 577xx and the external
 *   phy (XGXS) need to up as well as the external link of the
 *   phy (PHY_EXT1)
 * - DUAL_MEDIA - The link between the 577xx and the first
 *   external phy needs to be up, and at least one of the 2
 *   external phy link must be up.
 */
elink_status_t elink_link_update(struct elink_params * params,
                                 struct elink_vars * vars)
{
        struct bnx2x_softc *sc = params->sc;
        struct elink_vars phy_vars[ELINK_MAX_PHYS];
        uint8_t port = params->port;
        uint8_t link_10g_plus, phy_index;
        uint8_t ext_phy_link_up = 0, cur_link_up;
        elink_status_t rc = ELINK_STATUS_OK;
        __rte_unused uint8_t is_mi_int = 0;
        uint16_t ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
        uint8_t active_external_phy = ELINK_INT_PHY;
        vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
        vars->link_status &= ~ELINK_LINK_UPDATE_MASK;
        for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys;
             phy_index++) {
                phy_vars[phy_index].flow_ctrl = 0;
                phy_vars[phy_index].link_status = 0;
                phy_vars[phy_index].line_speed = 0;
                phy_vars[phy_index].duplex = DUPLEX_FULL;
                phy_vars[phy_index].phy_link_up = 0;
                phy_vars[phy_index].link_up = 0;
                phy_vars[phy_index].fault_detected = 0;
                /* different consideration, since vars holds inner state */
                phy_vars[phy_index].eee_status = vars->eee_status;
        }

        if (USES_WARPCORE(sc))
                elink_set_aer_mmd(params, &params->phy[ELINK_INT_PHY]);

        PMD_DRV_LOG(DEBUG, "port %x, XGXS?%x, int_status 0x%x",
                    port, (vars->phy_flags & PHY_XGXS_FLAG),
                    REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));

        is_mi_int = (uint8_t) (REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT +
                                      port * 0x18) > 0);
        PMD_DRV_LOG(DEBUG, "int_mask 0x%x MI_INT %x, SERDES_LINK %x",
                    REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
                    is_mi_int,
                    REG_RD(sc,
                           NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));

        PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x",
                    REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
                    REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));

        /* Disable emac */
        if (!CHIP_IS_E3(sc))
                REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0);

        /* Step 1:
         * Check external link change only for external phys, and apply
         * priority selection between them in case the link on both phys
         * is up. Note that instead of the common vars, a temporary
         * vars argument is used since each phy may have different link/
         * speed/duplex result
         */
        for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
             phy_index++) {
                struct elink_phy *phy = &params->phy[phy_index];
                if (!phy->read_status)
                        continue;
                /* Read link status and params of this ext phy */
                cur_link_up = phy->read_status(phy, params,
                                               &phy_vars[phy_index]);
                if (cur_link_up) {
                        PMD_DRV_LOG(DEBUG, "phy in index %d link is up",
                                    phy_index);
                } else {
                        PMD_DRV_LOG(DEBUG, "phy in index %d link is down",
                                    phy_index);
                        continue;
                }

                if (!ext_phy_link_up) {
                        ext_phy_link_up = 1;
                        active_external_phy = phy_index;
                } else {
                        switch (elink_phy_selection(params)) {
                        case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
                        case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                                /* In this option, the first PHY makes sure to pass the
                                 * traffic through itself only.
                                 * Its not clear how to reset the link on the second phy
                                 */
                                active_external_phy = ELINK_EXT_PHY1;
                                break;
                        case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
                                /* In this option, the first PHY makes sure to pass the
                                 * traffic through the second PHY.
                                 */
                                active_external_phy = ELINK_EXT_PHY2;
                                break;
                        default:
                                /* Link indication on both PHYs with the following cases
                                 * is invalid:
                                 * - FIRST_PHY means that second phy wasn't initialized,
                                 * hence its link is expected to be down
                                 * - SECOND_PHY means that first phy should not be able
                                 * to link up by itself (using configuration)
                                 * - DEFAULT should be overriden during initialiazation
                                 */
                                PMD_DRV_LOG(DEBUG, "Invalid link indication"
                                            "mpc=0x%x. DISABLING LINK !!!",
                                            params->multi_phy_config);
                                ext_phy_link_up = 0;
                                break;
                        }
                }
        }
        prev_line_speed = vars->line_speed;
        /* Step 2:
         * Read the status of the internal phy. In case of
         * DIRECT_SINGLE_MEDIA board, this link is the external link,
         * otherwise this is the link between the 577xx and the first
         * external phy
         */
        if (params->phy[ELINK_INT_PHY].read_status)
                params->phy[ELINK_INT_PHY].read_status(&params->
                                                       phy[ELINK_INT_PHY],
                                                       params, vars);
        /* The INT_PHY flow control reside in the vars. This include the
         * case where the speed or flow control are not set to AUTO.
         * Otherwise, the active external phy flow control result is set
         * to the vars. The ext_phy_line_speed is needed to check if the
         * speed is different between the internal phy and external phy.
         * This case may be result of intermediate link speed change.
         */
        if (active_external_phy > ELINK_INT_PHY) {
                vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl;
                /* Link speed is taken from the XGXS. AN and FC result from
                 * the external phy.
                 */
                vars->link_status |= phy_vars[active_external_phy].link_status;

                /* if active_external_phy is first PHY and link is up - disable
                 * disable TX on second external PHY
                 */
                if (active_external_phy == ELINK_EXT_PHY1) {
                        if (params->phy[ELINK_EXT_PHY2].phy_specific_func) {
                                PMD_DRV_LOG(DEBUG, "Disabling TX on EXT_PHY2");
                                params->phy[ELINK_EXT_PHY2].
                                    phy_specific_func(&params->
                                                      phy[ELINK_EXT_PHY2],
                                                      params, ELINK_DISABLE_TX);
                        }
                }

                ext_phy_line_speed = phy_vars[active_external_phy].line_speed;
                vars->duplex = phy_vars[active_external_phy].duplex;
                if (params->phy[active_external_phy].supported &
                    ELINK_SUPPORTED_FIBRE)
                        vars->link_status |= LINK_STATUS_SERDES_LINK;
                else
                        vars->link_status &= ~LINK_STATUS_SERDES_LINK;

                vars->eee_status = phy_vars[active_external_phy].eee_status;

                PMD_DRV_LOG(DEBUG, "Active external phy selected: %x",
                            active_external_phy);
        }

        for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
             phy_index++) {
                if (params->phy[phy_index].flags &
                    ELINK_FLAGS_REARM_LATCH_SIGNAL) {
                        elink_rearm_latch_signal(sc, port,
                                                 phy_index ==
                                                 active_external_phy);
                        break;
                }
        }
        PMD_DRV_LOG(DEBUG, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
                    " ext_phy_line_speed = %d", vars->flow_ctrl,
                    vars->link_status, ext_phy_line_speed);
        /* Upon link speed change set the NIG into drain mode. Comes to
         * deals with possible FIFO glitch due to clk change when speed
         * is decreased without link down indicator
         */

        if (vars->phy_link_up) {
                if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up &&
                    (ext_phy_line_speed != vars->line_speed)) {
                        PMD_DRV_LOG(DEBUG, "Internal link speed %d is"
                                    " different than the external"
                                    " link speed %d", vars->line_speed,
                                    ext_phy_line_speed);
                        vars->phy_link_up = 0;
                } else if (prev_line_speed != vars->line_speed) {
                        REG_WR(sc,
                               NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4,
                               0);
                        DELAY(1000 * 1);
                }
        }

        /* Anything 10 and over uses the bmac */
        link_10g_plus = (vars->line_speed >= ELINK_SPEED_10000);

        elink_link_int_ack(params, vars, link_10g_plus);

        /* In case external phy link is up, and internal link is down
         * (not initialized yet probably after link initialization, it
         * needs to be initialized.
         * Note that after link down-up as result of cable plug, the xgxs
         * link would probably become up again without the need
         * initialize it
         */
        if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) {
                PMD_DRV_LOG(DEBUG, "ext_phy_link_up = %d, int_link_up = %d,"
                            " init_preceding = %d", ext_phy_link_up,
                            vars->phy_link_up,
                            params->phy[ELINK_EXT_PHY1].flags &
                            ELINK_FLAGS_INIT_XGXS_FIRST);
                if (!(params->phy[ELINK_EXT_PHY1].flags &
                      ELINK_FLAGS_INIT_XGXS_FIRST)
                    && ext_phy_link_up && !vars->phy_link_up) {
                        vars->line_speed = ext_phy_line_speed;
                        if (vars->line_speed < ELINK_SPEED_1000)
                                vars->phy_flags |= PHY_SGMII_FLAG;
                        else
                                vars->phy_flags &= ~PHY_SGMII_FLAG;

                        if (params->phy[ELINK_INT_PHY].config_init)
                                params->phy[ELINK_INT_PHY].config_init(&params->
                                                                       phy
                                                                       [ELINK_INT_PHY],
                                                                       params,
                                                                       vars);
                }
        }
        /* Link is up only if both local phy and external phy (in case of
         * non-direct board) are up and no fault detected on active PHY.
         */
        vars->link_up = (vars->phy_link_up &&
                         (ext_phy_link_up ||
                          ELINK_SINGLE_MEDIA_DIRECT(params)) &&
                         (phy_vars[active_external_phy].fault_detected == 0));

        /* Update the PFC configuration in case it was changed */
        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
                vars->link_status |= LINK_STATUS_PFC_ENABLED;
        else
                vars->link_status &= ~LINK_STATUS_PFC_ENABLED;

        if (vars->link_up)
                rc = elink_update_link_up(params, vars, link_10g_plus);
        else
                rc = elink_update_link_down(params, vars);

        /* Update MCP link status was changed */
        if (params->
            feature_config_flags & ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX)
                elink_cb_fw_command(sc, DRV_MSG_CODE_LINK_STATUS_CHANGED, 0);

        return rc;
}

/*****************************************************************************/
/*                          External Phy section                             */
/*****************************************************************************/
static void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port)
{
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
        DELAY(1000 * 1);
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
}

static void elink_save_spirom_version(struct bnx2x_softc *sc,
                                      __rte_unused uint8_t port,
                                      uint32_t spirom_ver, uint32_t ver_addr)
{
        PMD_DRV_LOG(DEBUG, "FW version 0x%x:0x%x for port %d",
                    (uint16_t) (spirom_ver >> 16), (uint16_t) spirom_ver, port);

        if (ver_addr)
                REG_WR(sc, ver_addr, spirom_ver);
}

static void elink_save_bnx2x_spirom_ver(struct bnx2x_softc *sc,
                                      struct elink_phy *phy, uint8_t port)
{
        uint16_t fw_ver1, fw_ver2;

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_ROM_VER1, &fw_ver1);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_ROM_VER2, &fw_ver2);
        elink_save_spirom_version(sc, port,
                                  (uint32_t) (fw_ver1 << 16 | fw_ver2),
                                  phy->ver_addr);
}

static void elink_ext_phy_10G_an_resolve(struct bnx2x_softc *sc,
                                         struct elink_phy *phy,
                                         struct elink_vars *vars)
{
        uint16_t val;
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val);
        if (val & (1 << 5))
                vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
        if ((val & (1 << 0)) == 0)
                vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED;
}

/******************************************************************/
/*              common BNX2X8073/BNX2X8727 PHY SECTION            */
/******************************************************************/
static void elink_8073_resolve_fc(struct elink_phy *phy,
                                  struct elink_params *params,
                                  struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        if (phy->req_line_speed == ELINK_SPEED_10 ||
            phy->req_line_speed == ELINK_SPEED_100) {
                vars->flow_ctrl = phy->req_flow_ctrl;
                return;
        }

        if (elink_ext_phy_resolve_fc(phy, params, vars) &&
            (vars->flow_ctrl == ELINK_FLOW_CTRL_NONE)) {
                uint16_t pause_result;
                uint16_t ld_pause;      /* local */
                uint16_t lp_pause;      /* link partner */
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD,
                                MDIO_AN_REG_CL37_FC_LD, &ld_pause);

                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD,
                                MDIO_AN_REG_CL37_FC_LP, &lp_pause);
                pause_result = (ld_pause &
                                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
                pause_result |= (lp_pause &
                                 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;

                elink_pause_resolve(vars, pause_result);
                PMD_DRV_LOG(DEBUG, "Ext PHY CL37 pause result 0x%x",
                            pause_result);
        }
}

static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
                                                        struct elink_phy *phy,
                                                        uint8_t port)
{
        uint32_t count = 0;
        uint16_t fw_ver1, fw_msgout;
        elink_status_t rc = ELINK_STATUS_OK;

        /* Boot port from external ROM  */
        /* EDC grst */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);

        /* Ucode reboot and rst */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x008c);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001);

        /* Reset internal microprocessor */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_GEN_CTRL,
                         MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);

        /* Release srst bit */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_GEN_CTRL,
                         MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);

        /* Delay 100ms per the PHY specifications */
        DELAY(1000 * 100);

        /* 8073 sometimes taking longer to download */
        do {
                count++;
                if (count > 300) {
                        PMD_DRV_LOG(DEBUG,
                                    "elink_8073_8727_external_rom_boot port %x:"
                                    "Download failed. fw version = 0x%x",
                                    port, fw_ver1);
                        rc = ELINK_STATUS_ERROR;
                        break;
                }

                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_ROM_VER1, &fw_ver1);
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout);

                DELAY(1000 * 1);
        } while (fw_ver1 == 0 || fw_ver1 == 0x4321 ||
                 ((fw_msgout & 0xff) != 0x03 && (phy->type ==
                                                 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073)));

        /* Clear ser_boot_ctl bit */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000);
        elink_save_bnx2x_spirom_ver(sc, phy, port);

        PMD_DRV_LOG(DEBUG,
                    "elink_8073_8727_external_rom_boot port %x:"
                    "Download complete. fw version = 0x%x", port, fw_ver1);

        return rc;
}

/******************************************************************/
/*                      BNX2X8073 PHY SECTION                     */
/******************************************************************/
static elink_status_t elink_8073_is_snr_needed(struct bnx2x_softc *sc,
                                               struct elink_phy *phy)
{
        /* This is only required for 8073A1, version 102 only */
        uint16_t val;

        /* Read 8073 HW revision */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val);

        if (val != 1) {
                /* No need to workaround in 8073 A1 */
                return ELINK_STATUS_OK;
        }

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &val);

        /* SNR should be applied only for version 0x102 */
        if (val != 0x102)
                return ELINK_STATUS_OK;

        return 1;
}

static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
                                         struct elink_phy *phy)
{
        uint16_t val, cnt, cnt1;

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val);

        if (val > 0) {
                /* No need to workaround in 8073 A1 */
                return ELINK_STATUS_OK;
        }
        /* XAUI workaround in 8073 A0: */

        /* After loading the boot ROM and restarting Autoneg, poll
         * Dev1, Reg $C820:
         */

        for (cnt = 0; cnt < 1000; cnt++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &val);
                /* If bit [14] = 0 or bit [13] = 0, continue on with
                 * system initialization (XAUI work-around not required, as
                 * these bits indicate 2.5G or 1G link up).
                 */
                if (!(val & (1 << 14)) || !(val & (1 << 13))) {
                        PMD_DRV_LOG(DEBUG, "XAUI work-around not required");
                        return ELINK_STATUS_OK;
                } else if (!(val & (1 << 15))) {
                        PMD_DRV_LOG(DEBUG, "bit 15 went off");
                        /* If bit 15 is 0, then poll Dev1, Reg $C841 until it's
                         * MSB (bit15) goes to 1 (indicating that the XAUI
                         * workaround has completed), then continue on with
                         * system initialization.
                         */
                        for (cnt1 = 0; cnt1 < 1000; cnt1++) {
                                elink_cl45_read(sc, phy,
                                                MDIO_PMA_DEVAD,
                                                MDIO_PMA_REG_8073_XAUI_WA,
                                                &val);
                                if (val & (1 << 15)) {
                                        PMD_DRV_LOG(DEBUG,
                                                    "XAUI workaround has completed");
                                        return ELINK_STATUS_OK;
                                }
                                DELAY(1000 * 3);
                        }
                        break;
                }
                DELAY(1000 * 3);
        }
        PMD_DRV_LOG(DEBUG, "Warning: XAUI work-around timeout !!!");
        return ELINK_STATUS_ERROR;
}

static void elink_807x_force_10G(struct bnx2x_softc *sc, struct elink_phy *phy)
{
        /* Force KR or KX */
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b);
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0000);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000);
}

static void elink_8073_set_pause_cl37(struct elink_params *params,
                                      struct elink_phy *phy,
                                      struct elink_vars *vars)
{
        uint16_t cl37_val;
        struct bnx2x_softc *sc = params->sc;
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val);

        cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
        elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
        if ((vars->ieee_fc &
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
                cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
        }
        if ((vars->ieee_fc &
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
                cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
        }
        if ((vars->ieee_fc &
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
                cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
        }
        PMD_DRV_LOG(DEBUG, "Ext phy AN advertize cl37 0x%x", cl37_val);

        elink_cl45_write(sc, phy,
                         MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val);
        DELAY(1000 * 500);
}

static void elink_8073_specific_func(struct elink_phy *phy,
                                     struct elink_params *params,
                                     uint32_t action)
{
        struct bnx2x_softc *sc = params->sc;
        switch (action) {
        case ELINK_PHY_INIT:
                /* Enable LASI */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
                                 (1 << 2));
                elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
                                 0x0004);
                break;
        }
}

static elink_status_t elink_8073_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val = 0, tmp1;
        uint8_t gpio_port;
        PMD_DRV_LOG(DEBUG, "Init 8073");

        if (CHIP_IS_E2(sc))
                gpio_port = SC_PATH(sc);
        else
                gpio_port = params->port;
        /* Restore normal power mode */
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);

        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port);

        elink_8073_specific_func(phy, params, ELINK_PHY_INIT);
        elink_8073_set_pause_cl37(params, phy, vars);

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);

        PMD_DRV_LOG(DEBUG, "Before rom RX_ALARM(port1): 0x%x", tmp1);

        /* Swap polarity if required - Must be done only in non-1G mode */
        if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
                /* Configure the 8073 to swap _P and _N of the KR lines */
                PMD_DRV_LOG(DEBUG, "Swapping polarity for the 8073");
                /* 10G Rx/Tx and 1G Tx signal polarity swap */
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL,
                                 (val | (3 << 9)));
        }

        /* Enable CL37 BAM */
        if (REG_RD(sc, params->shmem_base +
                   offsetof(struct shmem_region,
                            dev_info.port_hw_config[params->port].
                            default_cfg)) &
            PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {

                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, &val);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, val | 1);
                PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR");
        }
        if (params->loopback_mode == ELINK_LOOPBACK_EXT) {
                elink_807x_force_10G(sc, phy);
                PMD_DRV_LOG(DEBUG, "Forced speed 10G on 807X");
                return ELINK_STATUS_OK;
        } else {
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0002);
        }
        if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) {
                if (phy->req_line_speed == ELINK_SPEED_10000) {
                        val = (1 << 7);
                } else if (phy->req_line_speed == ELINK_SPEED_2500) {
                        val = (1 << 5);
                        /* Note that 2.5G works only when used with 1G
                         * advertisement
                         */
                } else
                        val = (1 << 5);
        } else {
                val = 0;
                if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                        val |= (1 << 7);

                /* Note that 2.5G works only when used with 1G advertisement */
                if (phy->speed_cap_mask &
                    (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
                        val |= (1 << 5);
                PMD_DRV_LOG(DEBUG, "807x autoneg val = 0x%x", val);
        }

        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1);

        if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
             (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)) ||
            (phy->req_line_speed == ELINK_SPEED_2500)) {
                uint16_t phy_ver;
                /* Allow 2.5G for A1 and above */
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV,
                                &phy_ver);
                PMD_DRV_LOG(DEBUG, "Add 2.5G");
                if (phy_ver > 0)
                        tmp1 |= 1;
                else
                        tmp1 &= 0xfffe;
        } else {
                PMD_DRV_LOG(DEBUG, "Disable 2.5G");
                tmp1 &= 0xfffe;
        }

        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1);
        /* Add support for CL37 (passive mode) II */

        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD,
                         (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ?
                                  0x20 : 0x40)));

        /* Add support for CL37 (passive mode) III */
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);

        /* The SNR will improve about 2db by changing BW and FEE main
         * tap. Rest commands are executed after link is up
         * Change FFE main cursor to 5 in EDC register
         */
        if (elink_8073_is_snr_needed(sc, phy))
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN,
                                 0xFB0C);

        /* Enable FEC (Forware Error Correction) Request in the AN */
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1);
        tmp1 |= (1 << 15);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1);

        elink_ext_phy_set_pause(params, phy, vars);

        /* Restart autoneg */
        DELAY(1000 * 500);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
        PMD_DRV_LOG(DEBUG, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x",
                    ((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0));
        return ELINK_STATUS_OK;
}

static uint8_t elink_8073_read_status(struct elink_phy *phy,
                                      struct elink_params *params,
                                      struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t link_up = 0;
        uint16_t val1, val2;
        uint16_t link_status = 0;
        uint16_t an1000_status = 0;

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);

        PMD_DRV_LOG(DEBUG, "8703 LASI status 0x%x", val1);

        /* Clear the interrupt LASI status register */
        elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
        elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1);
        PMD_DRV_LOG(DEBUG, "807x PCS status 0x%x->0x%x", val2, val1);
        /* Clear MSG-OUT */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1);

        /* Check the LASI */
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);

        PMD_DRV_LOG(DEBUG, "KR 0x9003 0x%x", val2);

        /* Check the link status */
        elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
        PMD_DRV_LOG(DEBUG, "KR PCS status 0x%x", val2);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
        link_up = ((val1 & 4) == 4);
        PMD_DRV_LOG(DEBUG, "PMA_REG_STATUS=0x%x", val1);

        if (link_up && ((phy->req_line_speed != ELINK_SPEED_10000))) {
                if (elink_8073_xaui_wa(sc, phy) != 0)
                        return 0;
        }
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status);
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status);

        /* Check the link status on 1.1.2 */
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
        PMD_DRV_LOG(DEBUG, "KR PMA status 0x%x->0x%x,"
                    "an_link_status=0x%x", val2, val1, an1000_status);

        link_up = (((val1 & 4) == 4) || (an1000_status & (1 << 1)));
        if (link_up && elink_8073_is_snr_needed(sc, phy)) {
                /* The SNR will improve about 2dbby changing the BW and FEE main
                 * tap. The 1st write to change FFE main tap is set before
                 * restart AN. Change PLL Bandwidth in EDC register
                 */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH,
                                 0x26BC);

                /* Change CDR Bandwidth in EDC register */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH,
                                 0x0333);
        }
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
                        &link_status);

        /* Bits 0..2 --> speed detected, bits 13..15--> link is down */
        if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
                link_up = 1;
                vars->line_speed = ELINK_SPEED_10000;
                PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G",
                            params->port);
        } else if ((link_status & (1 << 1)) && (!(link_status & (1 << 14)))) {
                link_up = 1;
                vars->line_speed = ELINK_SPEED_2500;
                PMD_DRV_LOG(DEBUG, "port %x: External link up in 2.5G",
                            params->port);
        } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
                link_up = 1;
                vars->line_speed = ELINK_SPEED_1000;
                PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G",
                            params->port);
        } else {
                link_up = 0;
                PMD_DRV_LOG(DEBUG, "port %x: External link is down",
                            params->port);
        }

        if (link_up) {
                /* Swap polarity if required */
                if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
                        /* Configure the 8073 to swap P and N of the KR lines */
                        elink_cl45_read(sc, phy,
                                        MDIO_XS_DEVAD,
                                        MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1);
                        /* Set bit 3 to invert Rx in 1G mode and clear this bit
                         * when it`s in 10G mode.
                         */
                        if (vars->line_speed == ELINK_SPEED_1000) {
                                PMD_DRV_LOG(DEBUG, "Swapping 1G polarity for"
                                            "the 8073");
                                val1 |= (1 << 3);
                        } else
                                val1 &= ~(1 << 3);

                        elink_cl45_write(sc, phy,
                                         MDIO_XS_DEVAD,
                                         MDIO_XS_REG_8073_RX_CTRL_PCIE, val1);
                }
                elink_ext_phy_10G_an_resolve(sc, phy, vars);
                elink_8073_resolve_fc(phy, params, vars);
                vars->duplex = DUPLEX_FULL;
        }

        if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
                elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                MDIO_AN_REG_LP_AUTO_NEG2, &val1);

                if (val1 & (1 << 5))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;
                if (val1 & (1 << 7))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
        }

        return link_up;
}

static void elink_8073_link_reset(__rte_unused struct elink_phy *phy,
                                  struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t gpio_port;
        if (CHIP_IS_E2(sc))
                gpio_port = SC_PATH(sc);
        else
                gpio_port = params->port;
        PMD_DRV_LOG(DEBUG, "Setting 8073 port %d into low power mode",
                    gpio_port);
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
}

/******************************************************************/
/*                      BNX2X8705 PHY SECTION                     */
/******************************************************************/
static elink_status_t elink_8705_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             __rte_unused struct elink_vars
                                             *vars)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "init 8705");
        /* Restore normal power mode */
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
        /* HW reset */
        elink_ext_phy_hw_reset(sc, params->port);
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040);
        elink_wait_reset_complete(sc, phy, params);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288);
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf);
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100);
        elink_cl45_write(sc, phy, MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1);
        /* BNX2X8705 doesn't have microcode, hence the 0 */
        elink_save_spirom_version(sc, params->port, params->shmem_base, 0);
        return ELINK_STATUS_OK;
}

static uint8_t elink_8705_read_status(struct elink_phy *phy,
                                      struct elink_params *params,
                                      struct elink_vars *vars)
{
        uint8_t link_up = 0;
        uint16_t val1, rx_sd;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "read status 8705");
        elink_cl45_read(sc, phy,
                        MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
        PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1);

        elink_cl45_read(sc, phy,
                        MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
        PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);

        PMD_DRV_LOG(DEBUG, "8705 1.c809 val=0x%x", val1);
        link_up = ((rx_sd & 0x1) && (val1 & (1 << 9))
                   && ((val1 & (1 << 8)) == 0));
        if (link_up) {
                vars->line_speed = ELINK_SPEED_10000;
                elink_ext_phy_resolve_fc(phy, params, vars);
        }
        return link_up;
}

/******************************************************************/
/*                      SFP+ module Section                       */
/******************************************************************/
static void elink_set_disable_pmd_transmit(struct elink_params *params,
                                           struct elink_phy *phy,
                                           uint8_t pmd_dis)
{
        struct bnx2x_softc *sc = params->sc;
        /* Disable transmitter only for bootcodes which can enable it afterwards
         * (for D3 link)
         */
        if (pmd_dis) {
                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) {
                        PMD_DRV_LOG(DEBUG, "Disabling PMD transmitter");
                } else {
                        PMD_DRV_LOG(DEBUG, "NOT disabling PMD transmitter");
                        return;
                }
        } else {
                PMD_DRV_LOG(DEBUG, "Enabling PMD transmitter");
        }
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, pmd_dis);
}

static uint8_t elink_get_gpio_port(struct elink_params *params)
{
        uint8_t gpio_port;
        uint32_t swap_val, swap_override;
        struct bnx2x_softc *sc = params->sc;
        if (CHIP_IS_E2(sc)) {
                gpio_port = SC_PATH(sc);
        } else {
                gpio_port = params->port;
        }
        swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
        swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
        return gpio_port ^ (swap_val && swap_override);
}

static void elink_sfp_e1e2_set_transmitter(struct elink_params *params,
                                           struct elink_phy *phy, uint8_t tx_en)
{
        uint16_t val;
        uint8_t port = params->port;
        struct bnx2x_softc *sc = params->sc;
        uint32_t tx_en_mode;

        /* Disable/Enable transmitter ( TX laser of the SFP+ module.) */
        tx_en_mode = REG_RD(sc, params->shmem_base +
                            offsetof(struct shmem_region,
                                     dev_info.port_hw_config[port].sfp_ctrl)) &
            PORT_HW_CFG_TX_LASER_MASK;
        PMD_DRV_LOG(DEBUG, "Setting transmitter tx_en=%x for port %x "
                    "mode = %x", tx_en, port, tx_en_mode);
        switch (tx_en_mode) {
        case PORT_HW_CFG_TX_LASER_MDIO:

                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_PHY_IDENTIFIER, &val);

                if (tx_en)
                        val &= ~(1 << 15);
                else
                        val |= (1 << 15);

                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_PHY_IDENTIFIER, val);
                break;
        case PORT_HW_CFG_TX_LASER_GPIO0:
        case PORT_HW_CFG_TX_LASER_GPIO1:
        case PORT_HW_CFG_TX_LASER_GPIO2:
        case PORT_HW_CFG_TX_LASER_GPIO3:
                {
                        uint16_t gpio_pin;
                        uint8_t gpio_port, gpio_mode;
                        if (tx_en)
                                gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH;
                        else
                                gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW;

                        gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0;
                        gpio_port = elink_get_gpio_port(params);
                        elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
                        break;
                }
        default:
                PMD_DRV_LOG(DEBUG, "Invalid TX_LASER_MDIO 0x%x", tx_en_mode);
                break;
        }
}

static void elink_sfp_set_transmitter(struct elink_params *params,
                                      struct elink_phy *phy, uint8_t tx_en)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "Setting SFP+ transmitter to %d", tx_en);
        if (CHIP_IS_E3(sc))
                elink_sfp_e3_set_transmitter(params, phy, tx_en);
        else
                elink_sfp_e1e2_set_transmitter(params, phy, tx_en);
}

static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
                                                        struct elink_params
                                                        *params,
                                                        uint8_t dev_addr,
                                                        uint16_t addr,
                                                        uint8_t byte_cnt,
                                                        uint8_t * o_buf,
                                                        __rte_unused uint8_t
                                                        is_init)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val = 0;
        uint16_t i;
        if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
                PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf");
                return ELINK_STATUS_ERROR;
        }
        /* Set the read command byte count */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
                         (byte_cnt | (dev_addr << 8)));

        /* Set the read command address */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
                         addr);

        /* Activate read command */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
                         0x2c0f);

        /* Wait up to 500us for command complete status */
        for (i = 0; i < 100; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
                if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
                    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
                        break;
                DELAY(5);
        }

        if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
            MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
                PMD_DRV_LOG(DEBUG,
                            "Got bad status 0x%x when reading from SFP+ EEPROM",
                            (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
                return ELINK_STATUS_ERROR;
        }

        /* Read the buffer */
        for (i = 0; i < byte_cnt; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val);
                o_buf[i] =
                    (uint8_t) (val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK);
        }

        for (i = 0; i < 100; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
                if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
                    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
                        return ELINK_STATUS_OK;
                DELAY(1000 * 1);
        }
        return ELINK_STATUS_ERROR;
}

static void elink_warpcore_power_module(struct elink_params *params,
                                        uint8_t power)
{
        uint32_t pin_cfg;
        struct bnx2x_softc *sc = params->sc;

        pin_cfg = (REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[params->port].
                                   e3_sfp_ctrl)) & PORT_HW_CFG_E3_PWR_DIS_MASK)
            >> PORT_HW_CFG_E3_PWR_DIS_SHIFT;

        if (pin_cfg == PIN_CFG_NA)
                return;
        PMD_DRV_LOG(DEBUG, "Setting SFP+ module power to %d using pin cfg %d",
                    power, pin_cfg);
        /* Low ==> corresponding SFP+ module is powered
         * high ==> the SFP+ module is powered down
         */
        elink_set_cfg_pin(sc, pin_cfg, power ^ 1);
}

static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
                                                            elink_phy *phy,
                                                            struct elink_params
                                                            *params,
                                                            uint8_t dev_addr,
                                                            uint16_t addr,
                                                            uint8_t byte_cnt,
                                                            uint8_t * o_buf,
                                                            uint8_t is_init)
{
        elink_status_t rc = ELINK_STATUS_OK;
        uint8_t i, j = 0, cnt = 0;
        uint32_t data_array[4];
        uint16_t addr32;
        struct bnx2x_softc *sc = params->sc;

        if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
                PMD_DRV_LOG(DEBUG,
                            "Reading from eeprom is limited to 16 bytes");
                return ELINK_STATUS_ERROR;
        }

        /* 4 byte aligned address */
        addr32 = addr & (~0x3);
        do {
                if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
                        elink_warpcore_power_module(params, 0);
                        /* Note that 100us are not enough here */
                        DELAY(1000 * 1);
                        elink_warpcore_power_module(params, 1);
                }
                rc = elink_bsc_read(params, sc, dev_addr, addr32, 0, byte_cnt,
                                    data_array);
        } while ((rc != ELINK_STATUS_OK) && (++cnt < I2C_WA_RETRY_CNT));

        if (rc == ELINK_STATUS_OK) {
                for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) {
                        o_buf[j] = *((uint8_t *) data_array + i);
                        j++;
                }
        }

        return rc;
}

static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
                                                        struct elink_params
                                                        *params,
                                                        uint8_t dev_addr,
                                                        uint16_t addr,
                                                        uint8_t byte_cnt,
                                                        uint8_t * o_buf,
                                                        __rte_unused uint8_t
                                                        is_init)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val, i;

        if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
                PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf");
                return ELINK_STATUS_ERROR;
        }

        /* Set 2-wire transfer rate of SFP+ module EEPROM
         * to 100Khz since some DACs(direct attached cables) do
         * not work at 400Khz.
         */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR,
                         ((dev_addr << 8) | 1));

        /* Need to read from 1.8000 to clear it */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);

        /* Set the read command byte count */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
                         ((byte_cnt < 2) ? 2 : byte_cnt));

        /* Set the read command address */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, addr);
        /* Set the destination address */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         0x8004, MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF);

        /* Activate read command */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, 0x8002);
        /* Wait appropriate time for two-wire command to finish before
         * polling the status register
         */
        DELAY(1000 * 1);

        /* Wait up to 500us for command complete status */
        for (i = 0; i < 100; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
                if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
                    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
                        break;
                DELAY(5);
        }

        if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
            MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
                PMD_DRV_LOG(DEBUG,
                            "Got bad status 0x%x when reading from SFP+ EEPROM",
                            (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
                return ELINK_STATUS_TIMEOUT;
        }

        /* Read the buffer */
        for (i = 0; i < byte_cnt; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val);
                o_buf[i] =
                    (uint8_t) (val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK);
        }

        for (i = 0; i < 100; i++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
                if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
                    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
                        return ELINK_STATUS_OK;
                DELAY(1000 * 1);
        }

        return ELINK_STATUS_ERROR;
}

static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
                                                   struct elink_params *params,
                                                   uint8_t dev_addr,
                                                   uint16_t addr,
                                                   uint16_t byte_cnt,
                                                   uint8_t * o_buf)
{
        elink_status_t rc = 0;
        uint8_t xfer_size;
        uint8_t *user_data = o_buf;
        read_sfp_module_eeprom_func_p read_func;

        if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) {
                PMD_DRV_LOG(DEBUG, "invalid dev_addr 0x%x", dev_addr);
                return ELINK_STATUS_ERROR;
        }

        switch (phy->type) {
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726:
                read_func = elink_8726_read_sfp_module_eeprom;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722:
                read_func = elink_8727_read_sfp_module_eeprom;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                read_func = elink_warpcore_read_sfp_module_eeprom;
                break;
        default:
                return ELINK_OP_NOT_SUPPORTED;
        }

        while (!rc && (byte_cnt > 0)) {
                xfer_size = (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) ?
                    ELINK_SFP_EEPROM_PAGE_SIZE : byte_cnt;
                rc = read_func(phy, params, dev_addr, addr, xfer_size,
                               user_data, 0);
                byte_cnt -= xfer_size;
                user_data += xfer_size;
                addr += xfer_size;
        }
        return rc;
}

static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
                                         struct elink_params *params,
                                         uint16_t * edc_mode)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t sync_offset = 0, phy_idx, media_types;
        uint8_t gport, val[2], check_limiting_mode = 0;
        *edc_mode = ELINK_EDC_MODE_LIMITING;
        phy->media_type = ELINK_ETH_PHY_UNSPECIFIED;
        /* First check for copper cable */
        if (elink_read_sfp_module_eeprom(phy,
                                         params,
                                         ELINK_I2C_DEV_ADDR_A0,
                                         ELINK_SFP_EEPROM_CON_TYPE_ADDR,
                                         2, (uint8_t *) val) != 0) {
                PMD_DRV_LOG(DEBUG, "Failed to read from SFP+ module EEPROM");
                return ELINK_STATUS_ERROR;
        }

        switch (val[0]) {
        case ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER:
                {
                        uint8_t copper_module_type;
                        phy->media_type = ELINK_ETH_PHY_DA_TWINAX;
                        /* Check if its active cable (includes SFP+ module)
                         * of passive cable
                         */
                        if (elink_read_sfp_module_eeprom(phy,
                                                         params,
                                                         ELINK_I2C_DEV_ADDR_A0,
                                                         ELINK_SFP_EEPROM_FC_TX_TECH_ADDR,
                                                         1,
                                                         &copper_module_type) !=
                            0) {
                                PMD_DRV_LOG(DEBUG,
                                            "Failed to read copper-cable-type"
                                            " from SFP+ EEPROM");
                                return ELINK_STATUS_ERROR;
                        }

                        if (copper_module_type &
                            ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
                                PMD_DRV_LOG(DEBUG,
                                            "Active Copper cable detected");
                                if (phy->type ==
                                    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
                                        *edc_mode = ELINK_EDC_MODE_ACTIVE_DAC;
                                else
                                        check_limiting_mode = 1;
                        } else if (copper_module_type &
                                   ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE)
                        {
                                PMD_DRV_LOG(DEBUG,
                                            "Passive Copper cable detected");
                                *edc_mode = ELINK_EDC_MODE_PASSIVE_DAC;
                        } else {
                                PMD_DRV_LOG(DEBUG,
                                            "Unknown copper-cable-type 0x%x !!!",
                                            copper_module_type);
                                return ELINK_STATUS_ERROR;
                        }
                        break;
                }
        case ELINK_SFP_EEPROM_CON_TYPE_VAL_LC:
        case ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45:
                check_limiting_mode = 1;
                if ((val[1] & (ELINK_SFP_EEPROM_COMP_CODE_SR_MASK |
                               ELINK_SFP_EEPROM_COMP_CODE_LR_MASK |
                               ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) {
                        PMD_DRV_LOG(DEBUG, "1G SFP module detected");
                        gport = params->port;
                        phy->media_type = ELINK_ETH_PHY_SFP_1G_FIBER;
                        if (phy->req_line_speed != ELINK_SPEED_1000) {
                                phy->req_line_speed = ELINK_SPEED_1000;
                                if (!CHIP_IS_E1x(sc)) {
                                        gport = SC_PATH(sc) +
                                            (params->port << 1);
                                }
                                elink_cb_event_log(sc, ELINK_LOG_ID_NON_10G_MODULE, gport);     //"Warning: Link speed was forced to 1000Mbps."
                                // " Current SFP module in port %d is not"
                                // " compliant with 10G Ethernet",

                        }
                } else {
                        int idx, cfg_idx = 0;
                        PMD_DRV_LOG(DEBUG, "10G Optic module detected");
                        for (idx = ELINK_INT_PHY; idx < ELINK_MAX_PHYS; idx++) {
                                if (params->phy[idx].type == phy->type) {
                                        cfg_idx = ELINK_LINK_CONFIG_IDX(idx);
                                        break;
                                }
                        }
                        phy->media_type = ELINK_ETH_PHY_SFPP_10G_FIBER;
                        phy->req_line_speed = params->req_line_speed[cfg_idx];
                }
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Unable to determine module type 0x%x !!!",
                            val[0]);
                return ELINK_STATUS_ERROR;
        }
        sync_offset = params->shmem_base +
            offsetof(struct shmem_region,
                     dev_info.port_hw_config[params->port].media_type);
        media_types = REG_RD(sc, sync_offset);
        /* Update media type for non-PMF sync */
        for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
                if (&(params->phy[phy_idx]) == phy) {
                        media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK <<
                                         (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
                                          phy_idx));
                        media_types |=
                            ((phy->
                              media_type & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
                             (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx));
                        break;
                }
        }
        REG_WR(sc, sync_offset, media_types);
        if (check_limiting_mode) {
                uint8_t options[ELINK_SFP_EEPROM_OPTIONS_SIZE];
                if (elink_read_sfp_module_eeprom(phy,
                                                 params,
                                                 ELINK_I2C_DEV_ADDR_A0,
                                                 ELINK_SFP_EEPROM_OPTIONS_ADDR,
                                                 ELINK_SFP_EEPROM_OPTIONS_SIZE,
                                                 options) != 0) {
                        PMD_DRV_LOG(DEBUG,
                                    "Failed to read Option field from module EEPROM");
                        return ELINK_STATUS_ERROR;
                }
                if ((options[0] & ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
                        *edc_mode = ELINK_EDC_MODE_LINEAR;
                else
                        *edc_mode = ELINK_EDC_MODE_LIMITING;
        }
        PMD_DRV_LOG(DEBUG, "EDC mode is set to 0x%x", *edc_mode);
        return ELINK_STATUS_OK;
}

/* This function read the relevant field from the module (SFP+), and verify it
 * is compliant with this board
 */
static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
                                              struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t val, cmd;
        uint32_t fw_resp, fw_cmd_param;
        char vendor_name[ELINK_SFP_EEPROM_VENDOR_NAME_SIZE + 1];
        char vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE + 1];
        phy->flags &= ~ELINK_FLAGS_SFP_NOT_APPROVED;
        val = REG_RD(sc, params->shmem_base +
                     offsetof(struct shmem_region,
                              dev_info.port_feature_config[params->port].
                              config));
        if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
            PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) {
                PMD_DRV_LOG(DEBUG, "NOT enforcing module verification");
                return ELINK_STATUS_OK;
        }

        if (params->feature_config_flags &
            ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY) {
                /* Use specific phy request */
                cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL;
        } else if (params->feature_config_flags &
                   ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
                /* Use first phy request only in case of non-dual media */
                if (ELINK_DUAL_MEDIA(params)) {
                        PMD_DRV_LOG(DEBUG,
                                    "FW does not support OPT MDL verification");
                        return ELINK_STATUS_ERROR;
                }
                cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
        } else {
                /* No support in OPT MDL detection */
                PMD_DRV_LOG(DEBUG, "FW does not support OPT MDL verification");
                return ELINK_STATUS_ERROR;
        }

        fw_cmd_param = ELINK_FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl);
        fw_resp = elink_cb_fw_command(sc, cmd, fw_cmd_param);
        if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
                PMD_DRV_LOG(DEBUG, "Approved module");
                return ELINK_STATUS_OK;
        }

        /* Format the warning message */
        if (elink_read_sfp_module_eeprom(phy,
                                         params,
                                         ELINK_I2C_DEV_ADDR_A0,
                                         ELINK_SFP_EEPROM_VENDOR_NAME_ADDR,
                                         ELINK_SFP_EEPROM_VENDOR_NAME_SIZE,
                                         (uint8_t *) vendor_name))
                vendor_name[0] = '\0';
        else
                vendor_name[ELINK_SFP_EEPROM_VENDOR_NAME_SIZE] = '\0';
        if (elink_read_sfp_module_eeprom(phy,
                                         params,
                                         ELINK_I2C_DEV_ADDR_A0,
                                         ELINK_SFP_EEPROM_PART_NO_ADDR,
                                         ELINK_SFP_EEPROM_PART_NO_SIZE,
                                         (uint8_t *) vendor_pn))
                vendor_pn[0] = '\0';
        else
                vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE] = '\0';

        elink_cb_event_log(sc, ELINK_LOG_ID_UNQUAL_IO_MODULE, params->port, vendor_name, vendor_pn);    // "Warning: Unqualified SFP+ module detected,"
        // " Port %d from %s part number %s",

        if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) !=
            PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG)
                phy->flags |= ELINK_FLAGS_SFP_NOT_APPROVED;
        return ELINK_STATUS_ERROR;
}

static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy
                                                            *phy,
                                                            struct elink_params
                                                            *params)
{
        uint8_t val;
        elink_status_t rc;
        uint16_t timeout;
        /* Initialization time after hot-plug may take up to 300ms for
         * some phys type ( e.g. JDSU )
         */

        for (timeout = 0; timeout < 60; timeout++) {
                if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
                        rc = elink_warpcore_read_sfp_module_eeprom(phy, params,
                                                                   ELINK_I2C_DEV_ADDR_A0,
                                                                   1, 1, &val,
                                                                   1);
                else
                        rc = elink_read_sfp_module_eeprom(phy, params,
                                                          ELINK_I2C_DEV_ADDR_A0,
                                                          1, 1, &val);
                if (rc == 0) {
                        PMD_DRV_LOG(DEBUG,
                                    "SFP+ module initialization took %d ms",
                                    timeout * 5);
                        return ELINK_STATUS_OK;
                }
                DELAY(1000 * 5);
        }
        rc = elink_read_sfp_module_eeprom(phy, params, ELINK_I2C_DEV_ADDR_A0,
                                          1, 1, &val);
        return rc;
}

static void elink_8727_power_module(struct bnx2x_softc *sc,
                                    struct elink_phy *phy, uint8_t is_power_up)
{
        /* Make sure GPIOs are not using for LED mode */
        uint16_t val;
        /* In the GPIO register, bit 4 is use to determine if the GPIOs are
         * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for
         * output
         * Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0
         * Bits 8-9 determine the GPIOs value for INPUT in case bit 4 val is 1
         * where the 1st bit is the over-current(only input), and 2nd bit is
         * for power( only output )
         *
         * In case of NOC feature is disabled and power is up, set GPIO control
         *  as input to enable listening of over-current indication
         */
        if (phy->flags & ELINK_FLAGS_NOC)
                return;
        if (is_power_up)
                val = (1 << 4);
        else
                /* Set GPIO control to OUTPUT, and set the power bit
                 * to according to the is_power_up
                 */
                val = (1 << 1);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val);
}

static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc,
                                                   struct elink_phy *phy,
                                                   uint16_t edc_mode)
{
        uint16_t cur_limiting_mode;

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_ROM_VER2, &cur_limiting_mode);
        PMD_DRV_LOG(DEBUG, "Current Limiting mode is 0x%x", cur_limiting_mode);

        if (edc_mode == ELINK_EDC_MODE_LIMITING) {
                PMD_DRV_LOG(DEBUG, "Setting LIMITING MODE");
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_ROM_VER2,
                                 ELINK_EDC_MODE_LIMITING);
        } else {                /* LRM mode ( default ) */

                PMD_DRV_LOG(DEBUG, "Setting LRM MODE");

                /* Changing to LRM mode takes quite few seconds. So do it only
                 * if current mode is limiting (default is LRM)
                 */
                if (cur_limiting_mode != ELINK_EDC_MODE_LIMITING)
                        return ELINK_STATUS_OK;

                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, 0x128);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_MISC_CTRL0, 0x4008);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0xaaaa);
        }
        return ELINK_STATUS_OK;
}

static elink_status_t elink_8727_set_limiting_mode(struct bnx2x_softc *sc,
                                                   struct elink_phy *phy,
                                                   uint16_t edc_mode)
{
        uint16_t phy_identifier;
        uint16_t rom_ver2_val;
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_PHY_IDENTIFIER, &phy_identifier);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_PHY_IDENTIFIER,
                         (phy_identifier & ~(1 << 9)));

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &rom_ver2_val);
        /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_ROM_VER2,
                         (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff));

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_PHY_IDENTIFIER,
                         (phy_identifier | (1 << 9)));

        return ELINK_STATUS_OK;
}

static void elink_8727_specific_func(struct elink_phy *phy,
                                     struct elink_params *params,
                                     uint32_t action)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val;
        switch (action) {
        case ELINK_DISABLE_TX:
                elink_sfp_set_transmitter(params, phy, 0);
                break;
        case ELINK_ENABLE_TX:
                if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED))
                        elink_sfp_set_transmitter(params, phy, 1);
                break;
        case ELINK_PHY_INIT:
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
                                 (1 << 2) | (1 << 5));
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0006);
                /* Make MOD_ABS give interrupt on change */
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val);
                val |= (1 << 12);
                if (phy->flags & ELINK_FLAGS_NOC)
                        val |= (3 << 5);
                /* Set 8727 GPIOs to input to allow reading from the 8727 GPIO0
                 * status which reflect SFP+ module over-current
                 */
                if (!(phy->flags & ELINK_FLAGS_NOC))
                        val &= 0xff8f;  /* Reset bits 4-6 */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL,
                                 val);
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Function 0x%x not supported by 8727",
                            action);
                return;
        }
}

static void elink_set_e1e2_module_fault_led(struct elink_params *params,
                                            uint8_t gpio_mode)
{
        struct bnx2x_softc *sc = params->sc;

        uint32_t fault_led_gpio = REG_RD(sc, params->shmem_base +
                                         offsetof(struct shmem_region,
                                                  dev_info.
                                                  port_hw_config[params->port].
                                                  sfp_ctrl)) &
            PORT_HW_CFG_FAULT_MODULE_LED_MASK;
        switch (fault_led_gpio) {
        case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED:
                return;
        case PORT_HW_CFG_FAULT_MODULE_LED_GPIO0:
        case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1:
        case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2:
        case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3:
                {
                        uint8_t gpio_port = elink_get_gpio_port(params);
                        uint16_t gpio_pin = fault_led_gpio -
                            PORT_HW_CFG_FAULT_MODULE_LED_GPIO0;
                        PMD_DRV_LOG(DEBUG, "Set fault module-detected led "
                                    "pin %x port %x mode %x",
                                    gpio_pin, gpio_port, gpio_mode);
                        elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
                }
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Error: Invalid fault led mode 0x%x",
                            fault_led_gpio);
        }
}

static void elink_set_e3_module_fault_led(struct elink_params *params,
                                          uint8_t gpio_mode)
{
        uint32_t pin_cfg;
        uint8_t port = params->port;
        struct bnx2x_softc *sc = params->sc;
        pin_cfg = (REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[port].e3_sfp_ctrl)) &
                   PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >>
            PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT;
        PMD_DRV_LOG(DEBUG, "Setting Fault LED to %d using pin cfg %d",
                    gpio_mode, pin_cfg);
        elink_set_cfg_pin(sc, pin_cfg, gpio_mode);
}

static void elink_set_sfp_module_fault_led(struct elink_params *params,
                                           uint8_t gpio_mode)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "Setting SFP+ module fault LED to %d", gpio_mode);
        if (CHIP_IS_E3(sc)) {
                /* Low ==> if SFP+ module is supported otherwise
                 * High ==> if SFP+ module is not on the approved vendor list
                 */
                elink_set_e3_module_fault_led(params, gpio_mode);
        } else
                elink_set_e1e2_module_fault_led(params, gpio_mode);
}

static void elink_warpcore_hw_reset(__rte_unused struct elink_phy *phy,
                                    struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        elink_warpcore_power_module(params, 0);
        /* Put Warpcore in low power mode */
        REG_WR(sc, MISC_REG_WC0_RESET, 0x0c0e);

        /* Put LCPLL in low power mode */
        REG_WR(sc, MISC_REG_LCPLL_E40_PWRDWN, 1);
        REG_WR(sc, MISC_REG_LCPLL_E40_RESETB_ANA, 0);
        REG_WR(sc, MISC_REG_LCPLL_E40_RESETB_DIG, 0);
}

static void elink_power_sfp_module(struct elink_params *params,
                                   struct elink_phy *phy, uint8_t power)
{
        PMD_DRV_LOG(DEBUG, "Setting SFP+ power to %x", power);

        switch (phy->type) {
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722:
                elink_8727_power_module(params->sc, phy, power);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                elink_warpcore_power_module(params, power);
                break;
        default:
                break;
        }
}

static void elink_warpcore_set_limiting_mode(struct elink_params *params,
                                             struct elink_phy *phy,
                                             uint16_t edc_mode)
{
        uint16_t val = 0;
        uint16_t mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT;
        struct bnx2x_softc *sc = params->sc;

        uint8_t lane = elink_get_warpcore_lane(params);
        /* This is a global register which controls all lanes */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);
        val &= ~(0xf << (lane << 2));

        switch (edc_mode) {
        case ELINK_EDC_MODE_LINEAR:
        case ELINK_EDC_MODE_LIMITING:
                mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT;
                break;
        case ELINK_EDC_MODE_PASSIVE_DAC:
        case ELINK_EDC_MODE_ACTIVE_DAC:
                mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC;
                break;
        default:
                break;
        }

        val |= (mode << (lane << 2));
        elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
                         MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, val);
        /* A must read */
        elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                        MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);

        /* Restart microcode to re-read the new mode */
        elink_warpcore_reset_lane(sc, phy, 1);
        elink_warpcore_reset_lane(sc, phy, 0);

}

static void elink_set_limiting_mode(struct elink_params *params,
                                    struct elink_phy *phy, uint16_t edc_mode)
{
        switch (phy->type) {
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726:
                elink_8726_set_limiting_mode(params->sc, phy, edc_mode);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722:
                elink_8727_set_limiting_mode(params->sc, phy, edc_mode);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                elink_warpcore_set_limiting_mode(params, phy, edc_mode);
                break;
        }
}

static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
                                                 struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t edc_mode;
        elink_status_t rc = ELINK_STATUS_OK;

        uint32_t val = REG_RD(sc, params->shmem_base +
                              offsetof(struct shmem_region,
                                       dev_info.port_feature_config[params->
                                                                    port].
                                       config));
        /* Enabled transmitter by default */
        elink_sfp_set_transmitter(params, phy, 1);
        PMD_DRV_LOG(DEBUG, "SFP+ module plugged in/out detected on port %d",
                    params->port);
        /* Power up module */
        elink_power_sfp_module(params, phy, 1);
        if (elink_get_edc_mode(phy, params, &edc_mode) != 0) {
                PMD_DRV_LOG(DEBUG, "Failed to get valid module type");
                return ELINK_STATUS_ERROR;
        } else if (elink_verify_sfp_module(phy, params) != 0) {
                /* Check SFP+ module compatibility */
                PMD_DRV_LOG(DEBUG, "Module verification failed!!");
                rc = ELINK_STATUS_ERROR;
                /* Turn on fault module-detected led */
                elink_set_sfp_module_fault_led(params,
                                               MISC_REGISTERS_GPIO_HIGH);

                /* Check if need to power down the SFP+ module */
                if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
                    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) {
                        PMD_DRV_LOG(DEBUG, "Shutdown SFP+ module!!");
                        elink_power_sfp_module(params, phy, 0);
                        return rc;
                }
        } else {
                /* Turn off fault module-detected led */
                elink_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW);
        }

        /* Check and set limiting mode / LRM mode on 8726. On 8727 it
         * is done automatically
         */
        elink_set_limiting_mode(params, phy, edc_mode);

        /* Disable transmit for this module if the module is not approved, and
         * laser needs to be disabled.
         */
        if ((rc != 0) &&
            ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
             PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER))
                elink_sfp_set_transmitter(params, phy, 0);

        return rc;
}

void elink_handle_module_detect_int(struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        struct elink_phy *phy;
        uint32_t gpio_val;
        uint8_t gpio_num, gpio_port;
        if (CHIP_IS_E3(sc)) {
                phy = &params->phy[ELINK_INT_PHY];
                /* Always enable TX laser,will be disabled in case of fault */
                elink_sfp_set_transmitter(params, phy, 1);
        } else {
                phy = &params->phy[ELINK_EXT_PHY1];
        }
        if (elink_get_mod_abs_int_cfg(sc, params->shmem_base,
                                      params->port, &gpio_num, &gpio_port) ==
            ELINK_STATUS_ERROR) {
                PMD_DRV_LOG(DEBUG, "Failed to get MOD_ABS interrupt config");
                return;
        }

        /* Set valid module led off */
        elink_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH);

        /* Get current gpio val reflecting module plugged in / out */
        gpio_val = elink_cb_gpio_read(sc, gpio_num, gpio_port);

        /* Call the handling function in case module is detected */
        if (gpio_val == 0) {
                elink_set_mdio_emac_per_phy(sc, params);
                elink_set_aer_mmd(params, phy);

                elink_power_sfp_module(params, phy, 1);
                elink_cb_gpio_int_write(sc, gpio_num,
                                        MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
                                        gpio_port);
                if (elink_wait_for_sfp_module_initialized(phy, params) == 0) {
                        elink_sfp_module_detection(phy, params);
                        if (CHIP_IS_E3(sc)) {
                                uint16_t rx_tx_in_reset;
                                /* In case WC is out of reset, reconfigure the
                                 * link speed while taking into account 1G
                                 * module limitation.
                                 */
                                elink_cl45_read(sc, phy,
                                                MDIO_WC_DEVAD,
                                                MDIO_WC_REG_DIGITAL5_MISC6,
                                                &rx_tx_in_reset);
                                if ((!rx_tx_in_reset) &&
                                    (params->link_flags &
                                     ELINK_PHY_INITIALIZED)) {
                                        elink_warpcore_reset_lane(sc, phy, 1);
                                        elink_warpcore_config_sfi(phy, params);
                                        elink_warpcore_reset_lane(sc, phy, 0);
                                }
                        }
                } else {
                        PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized");
                }
        } else {
                elink_cb_gpio_int_write(sc, gpio_num,
                                        MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
                                        gpio_port);
                /* Module was plugged out.
                 * Disable transmit for this module
                 */
                phy->media_type = ELINK_ETH_PHY_NOT_PRESENT;
        }
}

/******************************************************************/
/*              Used by 8706 and 8727                             */
/******************************************************************/
static void elink_sfp_mask_fault(struct bnx2x_softc *sc,
                                 struct elink_phy *phy,
                                 uint16_t alarm_status_offset,
                                 uint16_t alarm_ctrl_offset)
{
        uint16_t alarm_status, val;
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status);
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status);
        /* Mask or enable the fault event. */
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val);
        if (alarm_status & (1 << 0))
                val &= ~(1 << 0);
        else
                val |= (1 << 0);
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val);
}

/******************************************************************/
/*              common BNX2X8706/BNX2X8726 PHY SECTION            */
/******************************************************************/
static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
                                           struct elink_params *params,
                                           struct elink_vars *vars)
{
        uint8_t link_up = 0;
        uint16_t val1, val2, rx_sd, pcs_status;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "XGXS 8706/8726");
        /* Clear RX Alarm */
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);

        elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT,
                             MDIO_PMA_LASI_TXCTRL);

        /* Clear LASI indication */
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
        PMD_DRV_LOG(DEBUG, "8706/8726 LASI status 0x%x--> 0x%x", val1, val2);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
        elink_cl45_read(sc, phy,
                        MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);

        PMD_DRV_LOG(DEBUG, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
                    " link_status 0x%x", rx_sd, pcs_status, val2);
        /* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status
         * are set, or if the autoneg bit 1 is set
         */
        link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1 << 1)));
        if (link_up) {
                if (val2 & (1 << 1))
                        vars->line_speed = ELINK_SPEED_1000;
                else
                        vars->line_speed = ELINK_SPEED_10000;
                elink_ext_phy_resolve_fc(phy, params, vars);
                vars->duplex = DUPLEX_FULL;
        }

        /* Capture 10G link fault. Read twice to clear stale value. */
        if (vars->line_speed == ELINK_SPEED_10000) {
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_TXSTAT, &val1);
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_TXSTAT, &val1);
                if (val1 & (1 << 0))
                        vars->fault_detected = 1;
        }

        return link_up;
}

/******************************************************************/
/*                      BNX2X8706 PHY SECTION                     */
/******************************************************************/
static uint8_t elink_8706_config_init(struct elink_phy *phy,
                                      struct elink_params *params,
                                      __rte_unused struct elink_vars *vars)
{
        uint32_t tx_en_mode;
        uint16_t cnt, val, tmp1;
        struct bnx2x_softc *sc = params->sc;

        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
        /* HW reset */
        elink_ext_phy_hw_reset(sc, params->port);
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040);
        elink_wait_reset_complete(sc, phy, params);

        /* Wait until fw is loaded */
        for (cnt = 0; cnt < 100; cnt++) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &val);
                if (val)
                        break;
                DELAY(1000 * 10);
        }
        PMD_DRV_LOG(DEBUG, "XGXS 8706 is initialized after %d ms", cnt);
        if ((params->feature_config_flags &
             ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
                uint8_t i;
                uint16_t reg;
                for (i = 0; i < 4; i++) {
                        reg = MDIO_XS_8706_REG_BANK_RX0 +
                            i * (MDIO_XS_8706_REG_BANK_RX1 -
                                 MDIO_XS_8706_REG_BANK_RX0);
                        elink_cl45_read(sc, phy, MDIO_XS_DEVAD, reg, &val);
                        /* Clear first 3 bits of the control */
                        val &= ~0x7;
                        /* Set control bits according to configuration */
                        val |= (phy->rx_preemphasis[i] & 0x7);
                        PMD_DRV_LOG(DEBUG, "Setting RX Equalizer to BNX2X8706"
                                    " reg 0x%x <-- val 0x%x", reg, val);
                        elink_cl45_write(sc, phy, MDIO_XS_DEVAD, reg, val);
                }
        }
        /* Force speed */
        if (phy->req_line_speed == ELINK_SPEED_10000) {
                PMD_DRV_LOG(DEBUG, "XGXS 8706 force 10Gbps");

                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_DIGITAL_CTRL, 0x400);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0);
                /* Arm LASI for link and Tx fault. */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3);
        } else {
                /* Force 1Gbps using autoneg with 1G advertisement */

                /* Allow CL37 through CL73 */
                PMD_DRV_LOG(DEBUG, "XGXS 8706 AutoNeg");
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);

                /* Enable Full-Duplex advertisement on CL37 */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
                /* Enable CL37 AN */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);
                /* 1G support */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_ADV, (1 << 5));

                /* Enable clause 73 AN */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x0400);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004);
        }
        elink_save_bnx2x_spirom_ver(sc, phy, params->port);

        /* If TX Laser is controlled by GPIO_0, do not let PHY go into low
         * power mode, if TX Laser is disabled
         */

        tx_en_mode = REG_RD(sc, params->shmem_base +
                            offsetof(struct shmem_region,
                                     dev_info.port_hw_config[params->port].
                                     sfp_ctrl))
        & PORT_HW_CFG_TX_LASER_MASK;

        if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {
                PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS");
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL,
                                &tmp1);
                tmp1 |= 0x1;
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL,
                                 tmp1);
        }

        return ELINK_STATUS_OK;
}

static elink_status_t elink_8706_read_status(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        return elink_8706_8726_read_status(phy, params, vars);
}

/******************************************************************/
/*                      BNX2X8726 PHY SECTION                     */
/******************************************************************/
static void elink_8726_config_loopback(struct elink_phy *phy,
                                       struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "PMA/PMD ext_phy_loopback: 8726");
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001);
}

static void elink_8726_external_rom_boot(struct elink_phy *phy,
                                         struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        /* Need to wait 100ms after reset */
        DELAY(1000 * 100);

        /* Micro controller re-boot */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B);

        /* Set soft reset */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_GEN_CTRL,
                         MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001);

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD,
                         MDIO_PMA_REG_GEN_CTRL,
                         MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);

        /* Wait for 150ms for microcode load */
        DELAY(1000 * 150);

        /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000);

        DELAY(1000 * 200);
        elink_save_bnx2x_spirom_ver(sc, phy, params->port);
}

static uint8_t elink_8726_read_status(struct elink_phy *phy,
                                      struct elink_params *params,
                                      struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val1;
        uint8_t link_up = elink_8706_8726_read_status(phy, params, vars);
        if (link_up) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
                                &val1);
                if (val1 & (1 << 15)) {
                        PMD_DRV_LOG(DEBUG, "Tx is disabled");
                        link_up = 0;
                        vars->line_speed = 0;
                }
        }
        return link_up;
}

static elink_status_t elink_8726_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "Initializing BNX2X8726");

        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
        elink_wait_reset_complete(sc, phy, params);

        elink_8726_external_rom_boot(phy, params);

        /* Need to call module detected on initialization since the module
         * detection triggered by actual module insertion might occur before
         * driver is loaded, and when driver is loaded, it reset all
         * registers, including the transmitter
         */
        elink_sfp_module_detection(phy, params);

        if (phy->req_line_speed == ELINK_SPEED_1000) {
                PMD_DRV_LOG(DEBUG, "Setting 1G force");
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400);
        } else if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
                   (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) &&
                   ((phy->speed_cap_mask &
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
                PMD_DRV_LOG(DEBUG, "Setting 1G clause37");
                /* Set Flow control */
                elink_ext_phy_set_pause(params, phy, vars);
                elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, 0x0020);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
                /* Enable RX-ALARM control to receive interrupt for 1G speed
                 * change
                 */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400);

        } else {                /* Default 10G. Set only LASI control */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1);
        }

        /* Set TX PreEmphasis if needed */
        if ((params->feature_config_flags &
             ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
                PMD_DRV_LOG(DEBUG,
                            "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
                            phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_8726_TX_CTRL1,
                                 phy->tx_preemphasis[0]);

                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_8726_TX_CTRL2,
                                 phy->tx_preemphasis[1]);
        }

        return ELINK_STATUS_OK;

}

static void elink_8726_link_reset(struct elink_phy *phy,
                                  struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "elink_8726_link_reset port %d", params->port);
        /* Set serial boot control for external load */
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);
}

/******************************************************************/
/*                      BNX2X8727 PHY SECTION                     */
/******************************************************************/

static void elink_8727_set_link_led(struct elink_phy *phy,
                                    struct elink_params *params, uint8_t mode)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t led_mode_bitmask = 0;
        uint16_t gpio_pins_bitmask = 0;
        uint16_t val;
        /* Only NOC flavor requires to set the LED specifically */
        if (!(phy->flags & ELINK_FLAGS_NOC))
                return;
        switch (mode) {
        case ELINK_LED_MODE_FRONT_PANEL_OFF:
        case ELINK_LED_MODE_OFF:
                led_mode_bitmask = 0;
                gpio_pins_bitmask = 0x03;
                break;
        case ELINK_LED_MODE_ON:
                led_mode_bitmask = 0;
                gpio_pins_bitmask = 0x02;
                break;
        case ELINK_LED_MODE_OPER:
                led_mode_bitmask = 0x60;
                gpio_pins_bitmask = 0x11;
                break;
        }
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val);
        val &= 0xff8f;
        val |= led_mode_bitmask;
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val);
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, &val);
        val &= 0xffe0;
        val |= gpio_pins_bitmask;
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val);
}

static void elink_8727_hw_reset(__rte_unused struct elink_phy *phy,
                                struct elink_params *params)
{
        uint32_t swap_val, swap_override;
        uint8_t port;
        /* The PHY reset is controlled by GPIO 1. Fake the port number
         * to cancel the swap done in set_gpio()
         */
        struct bnx2x_softc *sc = params->sc;
        swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
        swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
        port = (swap_val && swap_override) ^ 1;
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
}

static void elink_8727_config_speed(struct elink_phy *phy,
                                    struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t tmp1, val;
        /* Set option 1G speed */
        if ((phy->req_line_speed == ELINK_SPEED_1000) ||
            (phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER)) {
                PMD_DRV_LOG(DEBUG, "Setting 1G force");
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD);
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
                PMD_DRV_LOG(DEBUG, "1.7 = 0x%x", tmp1);
                /* Power down the XAUI until link is up in case of dual-media
                 * and 1G
                 */
                if (ELINK_DUAL_MEDIA(params)) {
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_8727_PCS_GP, &val);
                        val |= (3 << 10);
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8727_PCS_GP, val);
                }
        } else if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
                   ((phy->speed_cap_mask &
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) &&
                   ((phy->speed_cap_mask &
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {

                PMD_DRV_LOG(DEBUG, "Setting 1G clause37");
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300);
        } else {
                /* Since the 8727 has only single reset pin, need to set the 10G
                 * registers although it is default
                 */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL,
                                 0x0020);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2,
                                 0x0008);
        }
}

static elink_status_t elink_8727_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             __rte_unused struct elink_vars
                                             *vars)
{
        uint32_t tx_en_mode;
        uint16_t tmp1, mod_abs, tmp2;
        struct bnx2x_softc *sc = params->sc;
        /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */

        elink_wait_reset_complete(sc, phy, params);

        PMD_DRV_LOG(DEBUG, "Initializing BNX2X8727");

        elink_8727_specific_func(phy, params, ELINK_PHY_INIT);
        /* Initially configure MOD_ABS to interrupt when module is
         * presence( bit 8)
         */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
        /* Set EDC off by setting OPTXLOS signal input to low (bit 9).
         * When the EDC is off it locks onto a reference clock and avoids
         * becoming 'lost'
         */
        mod_abs &= ~(1 << 8);
        if (!(phy->flags & ELINK_FLAGS_NOC))
                mod_abs &= ~(1 << 9);
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);

        /* Enable/Disable PHY transmitter output */
        elink_set_disable_pmd_transmit(params, phy, 0);

        elink_8727_power_module(sc, phy, 1);

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);

        elink_8727_config_speed(phy, params);

        /* Set TX PreEmphasis if needed */
        if ((params->feature_config_flags &
             ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
                PMD_DRV_LOG(DEBUG, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
                            phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1,
                                 phy->tx_preemphasis[0]);

                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL2,
                                 phy->tx_preemphasis[1]);
        }

        /* If TX Laser is controlled by GPIO_0, do not let PHY go into low
         * power mode, if TX Laser is disabled
         */
        tx_en_mode = REG_RD(sc, params->shmem_base +
                            offsetof(struct shmem_region,
                                     dev_info.port_hw_config[params->port].
                                     sfp_ctrl))
        & PORT_HW_CFG_TX_LASER_MASK;

        if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {

                PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS");
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG,
                                &tmp2);
                tmp2 |= 0x1000;
                tmp2 &= 0xFFEF;
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG,
                                 tmp2);
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_PHY_IDENTIFIER, &tmp2);
                elink_cl45_write(sc, phy, MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_PHY_IDENTIFIER, (tmp2 & 0x7fff));
        }

        return ELINK_STATUS_OK;
}

static void elink_8727_handle_mod_abs(struct elink_phy *phy,
                                      struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t mod_abs, rx_alarm_status;
        uint32_t val = REG_RD(sc, params->shmem_base +
                              offsetof(struct shmem_region,
                                       dev_info.port_feature_config[params->
                                                                    port].config));
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
                        &mod_abs);
        if (mod_abs & (1 << 8)) {

                /* Module is absent */
                PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is absent");
                phy->media_type = ELINK_ETH_PHY_NOT_PRESENT;
                /* 1. Set mod_abs to detect next module
                 *    presence event
                 * 2. Set EDC off by setting OPTXLOS signal input to low
                 *    (bit 9).
                 *    When the EDC is off it locks onto a reference clock and
                 *    avoids becoming 'lost'.
                 */
                mod_abs &= ~(1 << 8);
                if (!(phy->flags & ELINK_FLAGS_NOC))
                        mod_abs &= ~(1 << 9);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);

                /* Clear RX alarm since it stays up as long as
                 * the mod_abs wasn't changed
                 */
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);

        } else {
                /* Module is present */
                PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is present");
                /* First disable transmitter, and if the module is ok, the
                 * module_detection will enable it
                 * 1. Set mod_abs to detect next module absent event ( bit 8)
                 * 2. Restore the default polarity of the OPRXLOS signal and
                 * this signal will then correctly indicate the presence or
                 * absence of the Rx signal. (bit 9)
                 */
                mod_abs |= (1 << 8);
                if (!(phy->flags & ELINK_FLAGS_NOC))
                        mod_abs |= (1 << 9);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);

                /* Clear RX alarm since it stays up as long as the mod_abs
                 * wasn't changed. This is need to be done before calling the
                 * module detection, otherwise it will clear* the link update
                 * alarm
                 */
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);

                if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
                    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
                        elink_sfp_set_transmitter(params, phy, 0);

                if (elink_wait_for_sfp_module_initialized(phy, params) == 0) {
                        elink_sfp_module_detection(phy, params);
                } else {
                        PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized");
                }

                /* Reconfigure link speed based on module type limitations */
                elink_8727_config_speed(phy, params);
        }

        PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
        /* No need to check link status in case of module plugged in/out */
}

static uint8_t elink_8727_read_status(struct elink_phy *phy,
                                      struct elink_params *params,
                                      struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t link_up = 0, oc_port = params->port;
        uint16_t link_status = 0;
        uint16_t rx_alarm_status, lasi_ctrl, val1;

        /* If PHY is not initialized, do not check link status */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, &lasi_ctrl);
        if (!lasi_ctrl)
                return 0;

        /* Check the LASI on Rx */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
        vars->line_speed = 0;
        PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS  0x%x", rx_alarm_status);

        elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT,
                             MDIO_PMA_LASI_TXCTRL);

        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);

        PMD_DRV_LOG(DEBUG, "8727 LASI status 0x%x", val1);

        /* Clear MSG-OUT */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1);

        /* If a module is present and there is need to check
         * for over current
         */
        if (!(phy->flags & ELINK_FLAGS_NOC) && !(rx_alarm_status & (1 << 5))) {
                /* Check over-current using 8727 GPIO0 input */
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL,
                                &val1);

                if ((val1 & (1 << 8)) == 0) {
                        if (!CHIP_IS_E1x(sc))
                                oc_port = SC_PATH(sc) + (params->port << 1);
                        PMD_DRV_LOG(DEBUG,
                                    "8727 Power fault has been detected on port %d",
                                    oc_port);
                        elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, oc_port);     //"Error: Power fault on Port %d has "
                        //  "been detected and the power to "
                        //  "that SFP+ module has been removed "
                        //  "to prevent failure of the card. "
                        //  "Please remove the SFP+ module and "
                        //  "restart the system to clear this "
                        //  "error.",
                        /* Disable all RX_ALARMs except for mod_abs */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_LASI_RXCTRL, (1 << 5));

                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_PHY_IDENTIFIER, &val1);
                        /* Wait for module_absent_event */
                        val1 |= (1 << 8);
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_PHY_IDENTIFIER, val1);
                        /* Clear RX alarm */
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
                        elink_8727_power_module(params->sc, phy, 0);
                        return 0;
                }
        }

        /* Over current check */
        /* When module absent bit is set, check module */
        if (rx_alarm_status & (1 << 5)) {
                elink_8727_handle_mod_abs(phy, params);
                /* Enable all mod_abs and link detection bits */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
                                 ((1 << 5) | (1 << 2)));
        }

        if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
                PMD_DRV_LOG(DEBUG, "Enabling 8727 TX laser");
                elink_sfp_set_transmitter(params, phy, 1);
        } else {
                PMD_DRV_LOG(DEBUG, "Tx is disabled");
                return 0;
        }

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &link_status);

        /* Bits 0..2 --> speed detected,
         * Bits 13..15--> link is down
         */
        if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
                link_up = 1;
                vars->line_speed = ELINK_SPEED_10000;
                PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G",
                            params->port);
        } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
                link_up = 1;
                vars->line_speed = ELINK_SPEED_1000;
                PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G",
                            params->port);
        } else {
                link_up = 0;
                PMD_DRV_LOG(DEBUG, "port %x: External link is down",
                            params->port);
        }

        /* Capture 10G link fault. */
        if (vars->line_speed == ELINK_SPEED_10000) {
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_TXSTAT, &val1);

                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD,
                                MDIO_PMA_LASI_TXSTAT, &val1);

                if (val1 & (1 << 0)) {
                        vars->fault_detected = 1;
                }
        }

        if (link_up) {
                elink_ext_phy_resolve_fc(phy, params, vars);
                vars->duplex = DUPLEX_FULL;
                PMD_DRV_LOG(DEBUG, "duplex = 0x%x", vars->duplex);
        }

        if ((ELINK_DUAL_MEDIA(params)) &&
            (phy->req_line_speed == ELINK_SPEED_1000)) {
                elink_cl45_read(sc, phy,
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_8727_PCS_GP, &val1);
                /* In case of dual-media board and 1G, power up the XAUI side,
                 * otherwise power it down. For 10G it is done automatically
                 */
                if (link_up)
                        val1 &= ~(3 << 10);
                else
                        val1 |= (3 << 10);
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_8727_PCS_GP, val1);
        }
        return link_up;
}

static void elink_8727_link_reset(struct elink_phy *phy,
                                  struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;

        /* Enable/Disable PHY transmitter output */
        elink_set_disable_pmd_transmit(params, phy, 1);

        /* Disable Transmitter */
        elink_sfp_set_transmitter(params, phy, 0);
        /* Clear LASI */
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0);

}

/******************************************************************/
/*              BNX2X8481/BNX2X84823/BNX2X84833 PHY SECTION               */
/******************************************************************/
static void elink_save_848xx_spirom_version(struct elink_phy *phy,
                                            struct bnx2x_softc *sc, uint8_t port)
{
        uint16_t val, fw_ver2, cnt, i;
        static struct elink_reg_set reg_set[] = {
                {MDIO_PMA_DEVAD, 0xA819, 0x0014},
                {MDIO_PMA_DEVAD, 0xA81A, 0xc200},
                {MDIO_PMA_DEVAD, 0xA81B, 0x0000},
                {MDIO_PMA_DEVAD, 0xA81C, 0x0300},
                {MDIO_PMA_DEVAD, 0xA817, 0x0009}
        };
        uint16_t fw_ver1;

        if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
            (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
                elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
                elink_save_spirom_version(sc, port, fw_ver1 & 0xfff,
                                          phy->ver_addr);
        } else {
                /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */
                /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
                for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                        elink_cl45_write(sc, phy, reg_set[i].devad,
                                         reg_set[i].reg, reg_set[i].val);

                for (cnt = 0; cnt < 100; cnt++) {
                        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA818, &val);
                        if (val & 1)
                                break;
                        DELAY(5);
                }
                if (cnt == 100) {
                        PMD_DRV_LOG(DEBUG, "Unable to read 848xx "
                                    "phy fw version(1)");
                        elink_save_spirom_version(sc, port, 0, phy->ver_addr);
                        return;
                }

                /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
                elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
                elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
                elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
                for (cnt = 0; cnt < 100; cnt++) {
                        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA818, &val);
                        if (val & 1)
                                break;
                        DELAY(5);
                }
                if (cnt == 100) {
                        PMD_DRV_LOG(DEBUG, "Unable to read 848xx phy fw "
                                    "version(2)");
                        elink_save_spirom_version(sc, port, 0, phy->ver_addr);
                        return;
                }

                /* lower 16 bits of the register SPI_FW_STATUS */
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
                /* upper 16 bits of register SPI_FW_STATUS */
                elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);

                elink_save_spirom_version(sc, port, (fw_ver2 << 16) | fw_ver1,
                                          phy->ver_addr);
        }

}

static void elink_848xx_set_led(struct bnx2x_softc *sc, struct elink_phy *phy)
{
        uint16_t val, offset, i;
        static struct elink_reg_set reg_set[] = {
                {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x0080},
                {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED2_MASK, 0x0018},
                {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, 0x0006},
                {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_BLINK, 0x0000},
                {MDIO_PMA_DEVAD, MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH,
                 MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ},
                {MDIO_AN_DEVAD, 0xFFFB, 0xFFFD}
        };
        /* PHYC_CTL_LED_CTL */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
        val &= 0xFE00;
        val |= 0x0092;

        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, val);

        for (i = 0; i < ARRAY_SIZE(reg_set); i++)
                elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
                                 reg_set[i].val);

        if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
            (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834))
                offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1;
        else
                offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1;

        /* stretch_en for LED3 */
        elink_cl45_read_or_write(sc, phy,
                                 MDIO_PMA_DEVAD, offset,
                                 MDIO_PMA_REG_84823_LED3_STRETCH_EN);
}

static void elink_848xx_specific_func(struct elink_phy *phy,
                                      struct elink_params *params,
                                      uint32_t action)
{
        struct bnx2x_softc *sc = params->sc;
        switch (action) {
        case ELINK_PHY_INIT:
                if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
                    (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
                        /* Save spirom version */
                        elink_save_848xx_spirom_version(phy, sc, params->port);
                }
                /* This phy uses the NIG latch mechanism since link indication
                 * arrives through its LED4 and not via its LASI signal, so we
                 * get steady signal instead of clear on read
                 */
                elink_bits_en(sc, NIG_REG_LATCH_BC_0 + params->port * 4,
                              1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT);

                elink_848xx_set_led(sc, phy);
                break;
        }
}

static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
                                                  struct elink_params *params,
                                                  struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t autoneg_val, an_1000_val, an_10_100_val;

        elink_848xx_specific_func(phy, params, ELINK_PHY_INIT);
        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000);

        /* set 1000 speed advertisement */
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL,
                        &an_1000_val);

        elink_ext_phy_set_pause(params, phy, vars);
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD,
                        MDIO_AN_REG_8481_LEGACY_AN_ADV, &an_10_100_val);
        elink_cl45_read(sc, phy,
                        MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL,
                        &autoneg_val);
        /* Disable forced speed */
        autoneg_val &=
            ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13));
        an_10_100_val &= ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8));

        if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask &
              PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
            (phy->req_line_speed == ELINK_SPEED_1000)) {
                an_1000_val |= (1 << 8);
                autoneg_val |= (1 << 9 | 1 << 12);
                if (phy->req_duplex == DUPLEX_FULL)
                        an_1000_val |= (1 << 9);
                PMD_DRV_LOG(DEBUG, "Advertising 1G");
        } else
                an_1000_val &= ~((1 << 8) | (1 << 9));

        elink_cl45_write(sc, phy,
                         MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL,
                         an_1000_val);

        /* Set 10/100 speed advertisement */
        if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) {
                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
                        /* Enable autoneg and restart autoneg for legacy speeds
                         */
                        autoneg_val |= (1 << 9 | 1 << 12);
                        an_10_100_val |= (1 << 8);
                        PMD_DRV_LOG(DEBUG, "Advertising 100M-FD");
                }

                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
                        /* Enable autoneg and restart autoneg for legacy speeds
                         */
                        autoneg_val |= (1 << 9 | 1 << 12);
                        an_10_100_val |= (1 << 7);
                        PMD_DRV_LOG(DEBUG, "Advertising 100M-HD");
                }

                if ((phy->speed_cap_mask &
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
                    (phy->supported & ELINK_SUPPORTED_10baseT_Full)) {
                        an_10_100_val |= (1 << 6);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 10M-FD");
                }

                if ((phy->speed_cap_mask &
                     PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) &&
                    (phy->supported & ELINK_SUPPORTED_10baseT_Half)) {
                        an_10_100_val |= (1 << 5);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 10M-HD");
                }
        }

        /* Only 10/100 are allowed to work in FORCE mode */
        if ((phy->req_line_speed == ELINK_SPEED_100) &&
            (phy->supported &
             (ELINK_SUPPORTED_100baseT_Half | ELINK_SUPPORTED_100baseT_Full))) {
                autoneg_val |= (1 << 13);
                /* Enabled AUTO-MDIX when autoneg is disabled */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL,
                                 (1 << 15 | 1 << 9 | 7 << 0));
                /* The PHY needs this set even for forced link. */
                an_10_100_val |= (1 << 8) | (1 << 7);
                PMD_DRV_LOG(DEBUG, "Setting 100M force");
        }
        if ((phy->req_line_speed == ELINK_SPEED_10) &&
            (phy->supported &
             (ELINK_SUPPORTED_10baseT_Half | ELINK_SUPPORTED_10baseT_Full))) {
                /* Enabled AUTO-MDIX when autoneg is disabled */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL,
                                 (1 << 15 | 1 << 9 | 7 << 0));
                PMD_DRV_LOG(DEBUG, "Setting 10M force");
        }

        elink_cl45_write(sc, phy,
                         MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV,
                         an_10_100_val);

        if (phy->req_duplex == DUPLEX_FULL)
                autoneg_val |= (1 << 8);

        /* Always write this if this is not 84833/4.
         * For 84833/4, write it only when it's a forced speed.
         */
        if (((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
             (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) ||
            ((autoneg_val & (1 << 12)) == 0))
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD,
                                 MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);

        if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask &
              PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
            (phy->req_line_speed == ELINK_SPEED_10000)) {
                PMD_DRV_LOG(DEBUG, "Advertising 10G");
                /* Restart autoneg for 10G */

                elink_cl45_read_or_write(sc, phy,
                                         MDIO_AN_DEVAD,
                                         MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
                                         0x1000);
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x3200);
        } else
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD,
                                 MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, 1);

        return ELINK_STATUS_OK;
}

static elink_status_t elink_8481_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        /* Restore normal power mode */
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);

        /* HW reset */
        elink_ext_phy_hw_reset(sc, params->port);
        elink_wait_reset_complete(sc, phy, params);

        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
        return elink_848xx_cmn_config_init(phy, params, vars);
}

#define PHY84833_CMDHDLR_WAIT 300
#define PHY84833_CMDHDLR_MAX_ARGS 5
static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy,
                                           struct elink_params *params,
                                           uint16_t fw_cmd, uint16_t cmd_args[],
                                           int argc)
{
        int idx;
        uint16_t val;
        struct bnx2x_softc *sc = params->sc;
        /* Write CMD_OPEN_OVERRIDE to STATUS reg */
        elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                         MDIO_84833_CMD_HDLR_STATUS,
                         PHY84833_STATUS_CMD_OPEN_OVERRIDE);
        for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
                elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                                MDIO_84833_CMD_HDLR_STATUS, &val);
                if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS)
                        break;
                DELAY(1000 * 1);
        }
        if (idx >= PHY84833_CMDHDLR_WAIT) {
                PMD_DRV_LOG(DEBUG, "FW cmd: FW not ready.");
                return ELINK_STATUS_ERROR;
        }

        /* Prepare argument(s) and issue command */
        for (idx = 0; idx < argc; idx++) {
                elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                                 MDIO_84833_CMD_HDLR_DATA1 + idx,
                                 cmd_args[idx]);
        }
        elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                         MDIO_84833_CMD_HDLR_COMMAND, fw_cmd);
        for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
                elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                                MDIO_84833_CMD_HDLR_STATUS, &val);
                if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) ||
                    (val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
                        break;
                DELAY(1000 * 1);
        }
        if ((idx >= PHY84833_CMDHDLR_WAIT) ||
            (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
                PMD_DRV_LOG(DEBUG, "FW cmd failed.");
                return ELINK_STATUS_ERROR;
        }
        /* Gather returning data */
        for (idx = 0; idx < argc; idx++) {
                elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                                MDIO_84833_CMD_HDLR_DATA1 + idx,
                                &cmd_args[idx]);
        }
        elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                         MDIO_84833_CMD_HDLR_STATUS,
                         PHY84833_STATUS_CMD_CLEAR_COMPLETE);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_84833_pair_swap_cfg(struct elink_phy *phy,
                                                struct elink_params *params,
                                                __rte_unused struct elink_vars
                                                *vars)
{
        uint32_t pair_swap;
        uint16_t data[PHY84833_CMDHDLR_MAX_ARGS];
        elink_status_t status;
        struct bnx2x_softc *sc = params->sc;

        /* Check for configuration. */
        pair_swap = REG_RD(sc, params->shmem_base +
                           offsetof(struct shmem_region,
                                    dev_info.port_hw_config[params->port].
                                    xgbt_phy_cfg)) &
            PORT_HW_CFG_RJ45_PAIR_SWAP_MASK;

        if (pair_swap == 0)
                return ELINK_STATUS_OK;

        /* Only the second argument is used for this command */
        data[1] = (uint16_t) pair_swap;

        status = elink_84833_cmd_hdlr(phy, params,
                                      PHY84833_CMD_SET_PAIR_SWAP, data,
                                      PHY84833_CMDHDLR_MAX_ARGS);
        if (status == ELINK_STATUS_OK) {
                PMD_DRV_LOG(DEBUG, "Pairswap OK, val=0x%x", data[1]);
        }

        return status;
}

static uint8_t elink_84833_get_reset_gpios(struct bnx2x_softc *sc,
                                           uint32_t shmem_base_path[],
                                           __rte_unused uint32_t chip_id)
{
        uint32_t reset_pin[2];
        uint32_t idx;
        uint8_t reset_gpios;
        if (CHIP_IS_E3(sc)) {
                /* Assume that these will be GPIOs, not EPIOs. */
                for (idx = 0; idx < 2; idx++) {
                        /* Map config param to register bit. */
                        reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] +
                                                offsetof(struct shmem_region,
                                                         dev_info.
                                                         port_hw_config[0].
                                                         e3_cmn_pin_cfg));
                        reset_pin[idx] =
                            (reset_pin[idx] & PORT_HW_CFG_E3_PHY_RESET_MASK) >>
                            PORT_HW_CFG_E3_PHY_RESET_SHIFT;
                        reset_pin[idx] -= PIN_CFG_GPIO0_P0;
                        reset_pin[idx] = (1 << reset_pin[idx]);
                }
                reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]);
        } else {
                /* E2, look from diff place of shmem. */
                for (idx = 0; idx < 2; idx++) {
                        reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] +
                                                offsetof(struct shmem_region,
                                                         dev_info.
                                                         port_hw_config[0].
                                                         default_cfg));
                        reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK;
                        reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0;
                        reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT;
                        reset_pin[idx] = (1 << reset_pin[idx]);
                }
                reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]);
        }

        return reset_gpios;
}

static elink_status_t elink_84833_hw_reset_phy(struct elink_phy *phy,
                                               struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t reset_gpios;
        uint32_t other_shmem_base_addr = REG_RD(sc, params->shmem2_base +
                                                offsetof(struct shmem2_region,
                                                         other_shmem_base_addr));

        uint32_t shmem_base_path[2];

        /* Work around for 84833 LED failure inside RESET status */
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                         MDIO_AN_REG_8481_LEGACY_MII_CTRL,
                         MDIO_AN_REG_8481_MII_CTRL_FORCE_1G);
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                         MDIO_AN_REG_8481_1G_100T_EXT_CTRL,
                         MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF);

        shmem_base_path[0] = params->shmem_base;
        shmem_base_path[1] = other_shmem_base_addr;

        reset_gpios = elink_84833_get_reset_gpios(sc, shmem_base_path,
                                                  params->chip_id);

        elink_cb_gpio_mult_write(sc, reset_gpios,
                                 MISC_REGISTERS_GPIO_OUTPUT_LOW);
        DELAY(10);
        PMD_DRV_LOG(DEBUG, "84833 hw reset on pin values 0x%x", reset_gpios);

        return ELINK_STATUS_OK;
}

static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy,
                                              struct elink_params *params,
                                              struct elink_vars *vars)
{
        elink_status_t rc;
        uint16_t cmd_args = 0;

        PMD_DRV_LOG(DEBUG, "Don't Advertise 10GBase-T EEE");

        /* Prevent Phy from working in EEE and advertising it */
        rc = elink_84833_cmd_hdlr(phy, params,
                                  PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
        if (rc != ELINK_STATUS_OK) {
                PMD_DRV_LOG(DEBUG, "EEE disable failed.");
                return rc;
        }

        return elink_eee_disable(phy, params, vars);
}

static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        elink_status_t rc;
        uint16_t cmd_args = 1;

        rc = elink_84833_cmd_hdlr(phy, params,
                                  PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
        if (rc != ELINK_STATUS_OK) {
                PMD_DRV_LOG(DEBUG, "EEE enable failed.");
                return rc;
        }

        return elink_eee_advertise(phy, params, vars, SHMEM_EEE_10G_ADV);
}

#define PHY84833_CONSTANT_LATENCY 1193
static elink_status_t elink_848x3_config_init(struct elink_phy *phy,
                                              struct elink_params *params,
                                              struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port, initialize = 1;
        uint16_t val;
        uint32_t actual_phy_selection;
        uint16_t cmd_args[PHY84833_CMDHDLR_MAX_ARGS];
        elink_status_t rc = ELINK_STATUS_OK;

        DELAY(1000 * 1);

        if (!(CHIP_IS_E1x(sc)))
                port = SC_PATH(sc);
        else
                port = params->port;

        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
                elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3,
                                    MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
        } else {
                /* MDIO reset */
                elink_cl45_write(sc, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x8000);
        }

        elink_wait_reset_complete(sc, phy, params);

        /* Wait for GPHY to come out of reset */
        DELAY(1000 * 50);
        if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) &&
            (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
                /* BNX2X84823 requires that XGXS links up first @ 10G for normal
                 * behavior.
                 */
                uint16_t temp;
                temp = vars->line_speed;
                vars->line_speed = ELINK_SPEED_10000;
                elink_set_autoneg(&params->phy[ELINK_INT_PHY], params, vars, 0);
                elink_program_serdes(&params->phy[ELINK_INT_PHY], params, vars);
                vars->line_speed = temp;
        }

        elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                        MDIO_CTL_REG_84823_MEDIA, &val);
        val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
                 MDIO_CTL_REG_84823_MEDIA_LINE_MASK |
                 MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN |
                 MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK |
                 MDIO_CTL_REG_84823_MEDIA_FIBER_1G);

        if (CHIP_IS_E3(sc)) {
                val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
                         MDIO_CTL_REG_84823_MEDIA_LINE_MASK);
        } else {
                val |= (MDIO_CTL_REG_84823_CTRL_MAC_XFI |
                        MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L);
        }

        actual_phy_selection = elink_phy_selection(params);

        switch (actual_phy_selection) {
        case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
                /* Do nothing. Essentially this is like the priority copper */
                break;
        case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
                break;
        case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
                val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER;
                break;
        case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
                /* Do nothing here. The first PHY won't be initialized at all */
                break;
        case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
                val |= MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN;
                initialize = 0;
                break;
        }
        if (params->phy[ELINK_EXT_PHY2].req_line_speed == ELINK_SPEED_1000)
                val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G;

        elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                         MDIO_CTL_REG_84823_MEDIA, val);
        PMD_DRV_LOG(DEBUG, "Multi_phy config = 0x%x, Media control = 0x%x",
                    params->multi_phy_config, val);

        if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
            (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
                elink_84833_pair_swap_cfg(phy, params, vars);

                /* Keep AutogrEEEn disabled. */
                cmd_args[0] = 0x0;
                cmd_args[1] = 0x0;
                cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
                cmd_args[3] = PHY84833_CONSTANT_LATENCY;
                rc = elink_84833_cmd_hdlr(phy, params,
                                          PHY84833_CMD_SET_EEE_MODE, cmd_args,
                                          PHY84833_CMDHDLR_MAX_ARGS);
                if (rc != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "Cfg AutogrEEEn failed.");
                }
        }
        if (initialize) {
                rc = elink_848xx_cmn_config_init(phy, params, vars);
        } else {
                elink_save_848xx_spirom_version(phy, sc, params->port);
        }
        /* 84833 PHY has a better feature and doesn't need to support this. */
        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
                uint32_t cms_enable = REG_RD(sc, params->shmem_base +
                                             offsetof(struct shmem_region,
                                                      dev_info.
                                                      port_hw_config[params->
                                                                     port].
                                                      default_cfg)) &
                    PORT_HW_CFG_ENABLE_CMS_MASK;

                elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                                MDIO_CTL_REG_84823_USER_CTRL_REG, &val);
                if (cms_enable)
                        val |= MDIO_CTL_REG_84823_USER_CTRL_CMS;
                else
                        val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS;
                elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
                                 MDIO_CTL_REG_84823_USER_CTRL_REG, val);
        }

        elink_cl45_read(sc, phy, MDIO_CTL_DEVAD,
                        MDIO_84833_TOP_CFG_FW_REV, &val);

        /* Configure EEE support */
        if ((val >= MDIO_84833_TOP_CFG_FW_EEE) &&
            (val != MDIO_84833_TOP_CFG_FW_NO_EEE) &&
            elink_eee_has_cap(params)) {
                rc = elink_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV);
                if (rc != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers");
                        elink_8483x_disable_eee(phy, params, vars);
                        return rc;
                }

                if ((phy->req_duplex == DUPLEX_FULL) &&
                    (params->eee_mode & ELINK_EEE_MODE_ADV_LPI) &&
                    (elink_eee_calc_timer(params) ||
                     !(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)))
                        rc = elink_8483x_enable_eee(phy, params, vars);
                else
                        rc = elink_8483x_disable_eee(phy, params, vars);
                if (rc != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "Failed to set EEE advertisement");
                        return rc;
                }
        } else {
                vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK;
        }

        if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
            (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) {
                /* Bring PHY out of super isolate mode as the final step. */
                elink_cl45_read_and_write(sc, phy,
                                          MDIO_CTL_DEVAD,
                                          MDIO_84833_TOP_CFG_XGPHY_STRAP1,
                                          (uint16_t) ~
                                          MDIO_84833_SUPER_ISOLATE);
        }
        return rc;
}

static uint8_t elink_848xx_read_status(struct elink_phy *phy,
                                       struct elink_params *params,
                                       struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val, val1, val2;
        uint8_t link_up = 0;

        /* Check 10G-BaseT link status */
        /* Check PMD signal ok */
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, 0xFFFA, &val1);
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2);
        PMD_DRV_LOG(DEBUG, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2);

        /* Check link 10G */
        if (val2 & (1 << 11)) {
                vars->line_speed = ELINK_SPEED_10000;
                vars->duplex = DUPLEX_FULL;
                link_up = 1;
                elink_ext_phy_10G_an_resolve(sc, phy, vars);
        } else {                /* Check Legacy speed link */
                uint16_t legacy_status, legacy_speed, mii_ctrl;

                /* Enable expansion register 0x42 (Operation mode status) */
                elink_cl45_write(sc, phy,
                                 MDIO_AN_DEVAD,
                                 MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf42);

                /* Get legacy speed operation status */
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD,
                                MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
                                &legacy_status);

                PMD_DRV_LOG(DEBUG, "Legacy speed status = 0x%x", legacy_status);
                link_up = ((legacy_status & (1 << 11)) == (1 << 11));
                legacy_speed = (legacy_status & (3 << 9));
                if (legacy_speed == (0 << 9))
                        vars->line_speed = ELINK_SPEED_10;
                else if (legacy_speed == (1 << 9))
                        vars->line_speed = ELINK_SPEED_100;
                else if (legacy_speed == (2 << 9))
                        vars->line_speed = ELINK_SPEED_1000;
                else {          /* Should not happen: Treat as link down */
                        vars->line_speed = 0;
                        link_up = 0;
                }

                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_IEEE_PHY_TEST) {
                        elink_cl45_read(sc, phy,
                                        MDIO_AN_DEVAD,
                                        MDIO_AN_REG_8481_LEGACY_MII_CTRL,
                                        &mii_ctrl);
                        /* For IEEE testing, check for a fake link. */
                        link_up |= ((mii_ctrl & 0x3040) == 0x40);
                }

                if (link_up) {
                        if (legacy_status & (1 << 8))
                                vars->duplex = DUPLEX_FULL;
                        else
                                vars->duplex = DUPLEX_HALF;

                        PMD_DRV_LOG(DEBUG,
                                    "Link is up in %dMbps, is_duplex_full= %d",
                                    vars->line_speed,
                                    (vars->duplex == DUPLEX_FULL));
                        /* Check legacy speed AN resolution */
                        elink_cl45_read(sc, phy,
                                        MDIO_AN_DEVAD,
                                        MDIO_AN_REG_8481_LEGACY_MII_STATUS,
                                        &val);
                        if (val & (1 << 5))
                                vars->link_status |=
                                    LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
                        elink_cl45_read(sc, phy,
                                        MDIO_AN_DEVAD,
                                        MDIO_AN_REG_8481_LEGACY_AN_EXPANSION,
                                        &val);
                        if ((val & (1 << 0)) == 0)
                                vars->link_status |=
                                    LINK_STATUS_PARALLEL_DETECTION_USED;
                }
        }
        if (link_up) {
                PMD_DRV_LOG(DEBUG, "BNX2X848x3: link speed is %d",
                            vars->line_speed);
                elink_ext_phy_resolve_fc(phy, params, vars);

                /* Read LP advertised speeds */
                elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                MDIO_AN_REG_CL37_FC_LP, &val);
                if (val & (1 << 5))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
                if (val & (1 << 6))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
                if (val & (1 << 7))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
                if (val & (1 << 8))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
                if (val & (1 << 9))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;

                elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                MDIO_AN_REG_1000T_STATUS, &val);

                if (val & (1 << 10))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
                if (val & (1 << 11))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;

                elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                                MDIO_AN_REG_MASTER_STATUS, &val);

                if (val & (1 << 11))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;

                /* Determine if EEE was negotiated */
                if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
                    (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834))
                        elink_eee_an_resolve(phy, params, vars);
        }

        return link_up;
}

static elink_status_t elink_848xx_format_ver(uint32_t raw_ver, uint8_t * str,
                                             uint16_t * len)
{
        elink_status_t status = ELINK_STATUS_OK;
        uint32_t spirom_ver;
        spirom_ver = ((raw_ver & 0xF80) >> 7) << 16 | (raw_ver & 0x7F);
        status = elink_format_ver(spirom_ver, str, len);
        return status;
}

static void elink_8481_hw_reset(__rte_unused struct elink_phy *phy,
                                struct elink_params *params)
{
        elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, 0);
        elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, 1);
}

static void elink_8481_link_reset(struct elink_phy *phy,
                                  struct elink_params *params)
{
        elink_cl45_write(params->sc, phy,
                         MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000);
        elink_cl45_write(params->sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1);
}

static void elink_848x3_link_reset(struct elink_phy *phy,
                                   struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port;
        uint16_t val16;

        if (!(CHIP_IS_E1x(sc)))
                port = SC_PATH(sc);
        else
                port = params->port;

        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) {
                elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3,
                                    MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
        } else {
                elink_cl45_read(sc, phy,
                                MDIO_CTL_DEVAD,
                                MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val16);
                val16 |= MDIO_84833_SUPER_ISOLATE;
                elink_cl45_write(sc, phy,
                                 MDIO_CTL_DEVAD,
                                 MDIO_84833_TOP_CFG_XGPHY_STRAP1, val16);
        }
}

static void elink_848xx_set_link_led(struct elink_phy *phy,
                                     struct elink_params *params, uint8_t mode)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val;
        __rte_unused uint8_t port;

        if (!(CHIP_IS_E1x(sc)))
                port = SC_PATH(sc);
        else
                port = params->port;

        switch (mode) {
        case ELINK_LED_MODE_OFF:

                PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OFF", port);

                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {

                        /* Set LED masks */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED2_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED3_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED5_MASK, 0x0);

                } else {
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x0);
                }
                break;
        case ELINK_LED_MODE_FRONT_PANEL_OFF:

                PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE FRONT PANEL OFF", port);

                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {

                        /* Set LED masks */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED2_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED3_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED5_MASK, 0x20);

                } else {
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x0);
                        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
                                /* Disable MI_INT interrupt before setting LED4
                                 * source to constant off.
                                 */
                                if (REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 +
                                           params->port * 4) &
                                    ELINK_NIG_MASK_MI_INT) {
                                        params->link_flags |=
                                            ELINK_LINK_FLAGS_INT_DISABLED;

                                        elink_bits_dis(sc,
                                                       NIG_REG_MASK_INTERRUPT_PORT0
                                                       + params->port * 4,
                                                       ELINK_NIG_MASK_MI_INT);
                                }
                                elink_cl45_write(sc, phy,
                                                 MDIO_PMA_DEVAD,
                                                 MDIO_PMA_REG_8481_SIGNAL_MASK,
                                                 0x0);
                        }
                }
                break;
        case ELINK_LED_MODE_ON:

                PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE ON", port);

                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {
                        /* Set control reg */
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
                        val &= 0x8000;
                        val |= 0x2492;

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LINK_SIGNAL, val);

                        /* Set LED masks */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x0);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED2_MASK, 0x20);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED3_MASK, 0x20);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED5_MASK, 0x0);
                } else {
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x20);
                        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
                                /* Disable MI_INT interrupt before setting LED4
                                 * source to constant on.
                                 */
                                if (REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 +
                                           params->port * 4) &
                                    ELINK_NIG_MASK_MI_INT) {
                                        params->link_flags |=
                                            ELINK_LINK_FLAGS_INT_DISABLED;

                                        elink_bits_dis(sc,
                                                       NIG_REG_MASK_INTERRUPT_PORT0
                                                       + params->port * 4,
                                                       ELINK_NIG_MASK_MI_INT);
                                }
                                elink_cl45_write(sc, phy,
                                                 MDIO_PMA_DEVAD,
                                                 MDIO_PMA_REG_8481_SIGNAL_MASK,
                                                 0x20);
                        }
                }
                break;

        case ELINK_LED_MODE_OPER:

                PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OPER", port);

                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {

                        /* Set control reg */
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_8481_LINK_SIGNAL, &val);

                        if (!((val &
                               MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK)
                              >>
                              MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT))
                        {
                                PMD_DRV_LOG(DEBUG, "Setting LINK_SIGNAL");
                                elink_cl45_write(sc, phy,
                                                 MDIO_PMA_DEVAD,
                                                 MDIO_PMA_REG_8481_LINK_SIGNAL,
                                                 0xa492);
                        }

                        /* Set LED masks */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, 0x10);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED2_MASK, 0x80);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED3_MASK, 0x98);

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED5_MASK, 0x40);

                } else {
                        /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED
                         * sources are all wired through LED1, rather than only
                         * 10G in other modes.
                         */
                        val = ((params->hw_led_mode <<
                                SHARED_HW_CFG_LED_MODE_SHIFT) ==
                               SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80;

                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LED1_MASK, val);

                        /* Tell LED3 to blink on source */
                        elink_cl45_read(sc, phy,
                                        MDIO_PMA_DEVAD,
                                        MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
                        val &= ~(7 << 6);
                        val |= (1 << 6);        /* A83B[8:6]= 1 */
                        elink_cl45_write(sc, phy,
                                         MDIO_PMA_DEVAD,
                                         MDIO_PMA_REG_8481_LINK_SIGNAL, val);
                        if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) {
                                /* Restore LED4 source to external link,
                                 * and re-enable interrupts.
                                 */
                                elink_cl45_write(sc, phy,
                                                 MDIO_PMA_DEVAD,
                                                 MDIO_PMA_REG_8481_SIGNAL_MASK,
                                                 0x40);
                                if (params->link_flags &
                                    ELINK_LINK_FLAGS_INT_DISABLED) {
                                        elink_link_int_enable(params);
                                        params->link_flags &=
                                            ~ELINK_LINK_FLAGS_INT_DISABLED;
                                }
                        }
                }
                break;
        }

        /* This is a workaround for E3+84833 until autoneg
         * restart is fixed in f/w
         */
        if (CHIP_IS_E3(sc)) {
                elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
                                MDIO_WC_REG_GP2_STATUS_GP_2_1, &val);
        }
}

/******************************************************************/
/*                      54618SE PHY SECTION                       */
/******************************************************************/
static void elink_54618se_specific_func(struct elink_phy *phy,
                                        struct elink_params *params,
                                        uint32_t action)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t temp;
        switch (action) {
        case ELINK_PHY_INIT:
                /* Configure LED4: set to INTR (0x6). */
                /* Accessing shadow register 0xe. */
                elink_cl22_write(sc, phy,
                                 MDIO_REG_GPHY_SHADOW,
                                 MDIO_REG_GPHY_SHADOW_LED_SEL2);
                elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
                temp &= ~(0xf << 4);
                temp |= (0x6 << 4);
                elink_cl22_write(sc, phy,
                                 MDIO_REG_GPHY_SHADOW,
                                 MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
                /* Configure INTR based on link status change. */
                elink_cl22_write(sc, phy,
                                 MDIO_REG_INTR_MASK,
                                 ~MDIO_REG_INTR_MASK_LINK_STATUS);
                break;
        }
}

static elink_status_t elink_54618se_config_init(struct elink_phy *phy,
                                                struct elink_params *params,
                                                struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t port;
        uint16_t autoneg_val, an_1000_val, an_10_100_val, fc_val, temp;
        uint32_t cfg_pin;

        PMD_DRV_LOG(DEBUG, "54618SE cfg init");
        DELAY(1000 * 1);

        /* This works with E3 only, no need to check the chip
         * before determining the port.
         */
        port = params->port;

        cfg_pin = (REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[port].
                                   e3_cmn_pin_cfg)) &
                   PORT_HW_CFG_E3_PHY_RESET_MASK) >>
            PORT_HW_CFG_E3_PHY_RESET_SHIFT;

        /* Drive pin high to bring the GPHY out of reset. */
        elink_set_cfg_pin(sc, cfg_pin, 1);

        /* wait for GPHY to reset */
        DELAY(1000 * 50);

        /* reset phy */
        elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, 0x8000);
        elink_wait_reset_complete(sc, phy, params);

        /* Wait for GPHY to reset */
        DELAY(1000 * 50);

        elink_54618se_specific_func(phy, params, ELINK_PHY_INIT);
        /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */
        elink_cl22_write(sc, phy,
                         MDIO_REG_GPHY_SHADOW,
                         MDIO_REG_GPHY_SHADOW_AUTO_DET_MED);
        elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
        temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD;
        elink_cl22_write(sc, phy,
                         MDIO_REG_GPHY_SHADOW,
                         MDIO_REG_GPHY_SHADOW_WR_ENA | temp);

        /* Set up fc */
        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
        elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
        fc_val = 0;
        if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC)
                fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;

        if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH)
                fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;

        /* Read all advertisement */
        elink_cl22_read(sc, phy, 0x09, &an_1000_val);

        elink_cl22_read(sc, phy, 0x04, &an_10_100_val);

        elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &autoneg_val);

        /* Disable forced speed */
        autoneg_val &=
            ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13));
        an_10_100_val &=
            ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) | (1 << 10) |
              (1 << 11));

        if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask &
              PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
            (phy->req_line_speed == ELINK_SPEED_1000)) {
                an_1000_val |= (1 << 8);
                autoneg_val |= (1 << 9 | 1 << 12);
                if (phy->req_duplex == DUPLEX_FULL)
                        an_1000_val |= (1 << 9);
                PMD_DRV_LOG(DEBUG, "Advertising 1G");
        } else
                an_1000_val &= ~((1 << 8) | (1 << 9));

        elink_cl22_write(sc, phy, 0x09, an_1000_val);
        elink_cl22_read(sc, phy, 0x09, &an_1000_val);

        /* Advertise 10/100 link speed */
        if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) {
                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
                        an_10_100_val |= (1 << 5);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 10M-HD");
                }
                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
                        an_10_100_val |= (1 << 6);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 10M-FD");
                }
                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
                        an_10_100_val |= (1 << 7);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 100M-HD");
                }
                if (phy->speed_cap_mask &
                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
                        an_10_100_val |= (1 << 8);
                        autoneg_val |= (1 << 9 | 1 << 12);
                        PMD_DRV_LOG(DEBUG, "Advertising 100M-FD");
                }
        }

        /* Only 10/100 are allowed to work in FORCE mode */
        if (phy->req_line_speed == ELINK_SPEED_100) {
                autoneg_val |= (1 << 13);
                /* Enabled AUTO-MDIX when autoneg is disabled */
                elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
                PMD_DRV_LOG(DEBUG, "Setting 100M force");
        }
        if (phy->req_line_speed == ELINK_SPEED_10) {
                /* Enabled AUTO-MDIX when autoneg is disabled */
                elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
                PMD_DRV_LOG(DEBUG, "Setting 10M force");
        }

        if ((phy->flags & ELINK_FLAGS_EEE) && elink_eee_has_cap(params)) {
                elink_status_t rc;

                elink_cl22_write(sc, phy, MDIO_REG_GPHY_EXP_ACCESS,
                                 MDIO_REG_GPHY_EXP_ACCESS_TOP |
                                 MDIO_REG_GPHY_EXP_TOP_2K_BUF);
                elink_cl22_read(sc, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, &temp);
                temp &= 0xfffe;
                elink_cl22_write(sc, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, temp);

                rc = elink_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV);
                if (rc != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers");
                        elink_eee_disable(phy, params, vars);
                } else if ((params->eee_mode & ELINK_EEE_MODE_ADV_LPI) &&
                           (phy->req_duplex == DUPLEX_FULL) &&
                           (elink_eee_calc_timer(params) ||
                            !(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI))) {
                        /* Need to advertise EEE only when requested,
                         * and either no LPI assertion was requested,
                         * or it was requested and a valid timer was set.
                         * Also notice full duplex is required for EEE.
                         */
                        elink_eee_advertise(phy, params, vars,
                                            SHMEM_EEE_1G_ADV);
                } else {
                        PMD_DRV_LOG(DEBUG, "Don't Advertise 1GBase-T EEE");
                        elink_eee_disable(phy, params, vars);
                }
        } else {
                vars->eee_status &= ~SHMEM_EEE_1G_ADV <<
                    SHMEM_EEE_SUPPORTED_SHIFT;

                if (phy->flags & ELINK_FLAGS_EEE) {
                        /* Handle legacy auto-grEEEn */
                        if (params->feature_config_flags &
                            ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED) {
                                temp = 6;
                                PMD_DRV_LOG(DEBUG, "Enabling Auto-GrEEEn");
                        } else {
                                temp = 0;
                                PMD_DRV_LOG(DEBUG, "Don't Adv. EEE");
                        }
                        elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
                                         MDIO_AN_REG_EEE_ADV, temp);
                }
        }

        elink_cl22_write(sc, phy, 0x04, an_10_100_val | fc_val);

        if (phy->req_duplex == DUPLEX_FULL)
                autoneg_val |= (1 << 8);

        elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, autoneg_val);

        return ELINK_STATUS_OK;
}

static void elink_5461x_set_link_led(struct elink_phy *phy,
                                     struct elink_params *params, uint8_t mode)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t temp;

        elink_cl22_write(sc, phy,
                         MDIO_REG_GPHY_SHADOW, MDIO_REG_GPHY_SHADOW_LED_SEL1);
        elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
        temp &= 0xff00;

        PMD_DRV_LOG(DEBUG, "54618x set link led (mode=%x)", mode);
        switch (mode) {
        case ELINK_LED_MODE_FRONT_PANEL_OFF:
        case ELINK_LED_MODE_OFF:
                temp |= 0x00ee;
                break;
        case ELINK_LED_MODE_OPER:
                temp |= 0x0001;
                break;
        case ELINK_LED_MODE_ON:
                temp |= 0x00ff;
                break;
        default:
                break;
        }
        elink_cl22_write(sc, phy,
                         MDIO_REG_GPHY_SHADOW,
                         MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
        return;
}

static void elink_54618se_link_reset(struct elink_phy *phy,
                                     struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t cfg_pin;
        uint8_t port;

        /* In case of no EPIO routed to reset the GPHY, put it
         * in low power mode.
         */
        elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, 0x800);
        /* This works with E3 only, no need to check the chip
         * before determining the port.
         */
        port = params->port;
        cfg_pin = (REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[port].
                                   e3_cmn_pin_cfg)) &
                   PORT_HW_CFG_E3_PHY_RESET_MASK) >>
            PORT_HW_CFG_E3_PHY_RESET_SHIFT;

        /* Drive pin low to put GPHY in reset. */
        elink_set_cfg_pin(sc, cfg_pin, 0);
}

static uint8_t elink_54618se_read_status(struct elink_phy *phy,
                                         struct elink_params *params,
                                         struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val;
        uint8_t link_up = 0;
        uint16_t legacy_status, legacy_speed;

        /* Get speed operation status */
        elink_cl22_read(sc, phy, MDIO_REG_GPHY_AUX_STATUS, &legacy_status);
        PMD_DRV_LOG(DEBUG, "54618SE read_status: 0x%x", legacy_status);

        /* Read status to clear the PHY interrupt. */
        elink_cl22_read(sc, phy, MDIO_REG_INTR_STATUS, &val);

        link_up = ((legacy_status & (1 << 2)) == (1 << 2));

        if (link_up) {
                legacy_speed = (legacy_status & (7 << 8));
                if (legacy_speed == (7 << 8)) {
                        vars->line_speed = ELINK_SPEED_1000;
                        vars->duplex = DUPLEX_FULL;
                } else if (legacy_speed == (6 << 8)) {
                        vars->line_speed = ELINK_SPEED_1000;
                        vars->duplex = DUPLEX_HALF;
                } else if (legacy_speed == (5 << 8)) {
                        vars->line_speed = ELINK_SPEED_100;
                        vars->duplex = DUPLEX_FULL;
                }
                /* Omitting 100Base-T4 for now */
                else if (legacy_speed == (3 << 8)) {
                        vars->line_speed = ELINK_SPEED_100;
                        vars->duplex = DUPLEX_HALF;
                } else if (legacy_speed == (2 << 8)) {
                        vars->line_speed = ELINK_SPEED_10;
                        vars->duplex = DUPLEX_FULL;
                } else if (legacy_speed == (1 << 8)) {
                        vars->line_speed = ELINK_SPEED_10;
                        vars->duplex = DUPLEX_HALF;
                } else          /* Should not happen */
                        vars->line_speed = 0;

                PMD_DRV_LOG(DEBUG,
                            "Link is up in %dMbps, is_duplex_full= %d",
                            vars->line_speed, (vars->duplex == DUPLEX_FULL));

                /* Check legacy speed AN resolution */
                elink_cl22_read(sc, phy, 0x01, &val);
                if (val & (1 << 5))
                        vars->link_status |=
                            LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
                elink_cl22_read(sc, phy, 0x06, &val);
                if ((val & (1 << 0)) == 0)
                        vars->link_status |=
                            LINK_STATUS_PARALLEL_DETECTION_USED;

                PMD_DRV_LOG(DEBUG, "BNX2X54618SE: link speed is %d",
                            vars->line_speed);

                elink_ext_phy_resolve_fc(phy, params, vars);

                if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
                        /* Report LP advertised speeds */
                        elink_cl22_read(sc, phy, 0x5, &val);

                        if (val & (1 << 5))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_10THD_CAPABLE;
                        if (val & (1 << 6))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE;
                        if (val & (1 << 7))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE;
                        if (val & (1 << 8))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE;
                        if (val & (1 << 9))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_100T4_CAPABLE;

                        elink_cl22_read(sc, phy, 0xa, &val);
                        if (val & (1 << 10))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE;
                        if (val & (1 << 11))
                                vars->link_status |=
                                    LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE;

                        if ((phy->flags & ELINK_FLAGS_EEE) &&
                            elink_eee_has_cap(params))
                                elink_eee_an_resolve(phy, params, vars);
                }
        }
        return link_up;
}

static void elink_54618se_config_loopback(struct elink_phy *phy,
                                          struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t val;
        uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;

        PMD_DRV_LOG(DEBUG, "2PMA/PMD ext_phy_loopback: 54618se");

        /* Enable master/slave manual mmode and set to master */
        /* mii write 9 [bits set 11 12] */
        elink_cl22_write(sc, phy, 0x09, 3 << 11);

        /* forced 1G and disable autoneg */
        /* set val [mii read 0] */
        /* set val [expr $val & [bits clear 6 12 13]] */
        /* set val [expr $val | [bits set 6 8]] */
        /* mii write 0 $val */
        elink_cl22_read(sc, phy, 0x00, &val);
        val &= ~((1 << 6) | (1 << 12) | (1 << 13));
        val |= (1 << 6) | (1 << 8);
        elink_cl22_write(sc, phy, 0x00, val);

        /* Set external loopback and Tx using 6dB coding */
        /* mii write 0x18 7 */
        /* set val [mii read 0x18] */
        /* mii write 0x18 [expr $val | [bits set 10 15]] */
        elink_cl22_write(sc, phy, 0x18, 7);
        elink_cl22_read(sc, phy, 0x18, &val);
        elink_cl22_write(sc, phy, 0x18, val | (1 << 10) | (1 << 15));

        /* This register opens the gate for the UMAC despite its name */
        REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1);

        /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame
         * length used by the MAC receive logic to check frames.
         */
        REG_WR(sc, umac_base + UMAC_REG_MAXFR, 0x2710);
}

/******************************************************************/
/*                      SFX7101 PHY SECTION                       */
/******************************************************************/
static void elink_7101_config_loopback(struct elink_phy *phy,
                                       struct elink_params *params)
{
        struct bnx2x_softc *sc = params->sc;
        /* SFX7101_XGXS_TEST1 */
        elink_cl45_write(sc, phy,
                         MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100);
}

static elink_status_t elink_7101_config_init(struct elink_phy *phy,
                                             struct elink_params *params,
                                             struct elink_vars *vars)
{
        uint16_t fw_ver1, fw_ver2, val;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LASI indication");

        /* Restore normal power mode */
        elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
        /* HW reset */
        elink_ext_phy_hw_reset(sc, params->port);
        elink_wait_reset_complete(sc, phy, params);

        elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1);
        PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LED to blink on traffic");
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1 << 3));

        elink_ext_phy_set_pause(params, phy, vars);
        /* Restart autoneg */
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val);
        val |= 0x200;
        elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val);

        /* Save spirom version */
        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1);

        elink_cl45_read(sc, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2);
        elink_save_spirom_version(sc, params->port,
                                  (uint32_t) (fw_ver1 << 16 | fw_ver2),
                                  phy->ver_addr);
        return ELINK_STATUS_OK;
}

static uint8_t elink_7101_read_status(struct elink_phy *phy,
                                      struct elink_params *params,
                                      struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t link_up;
        uint16_t val1, val2;
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
        PMD_DRV_LOG(DEBUG, "10G-base-T LASI status 0x%x->0x%x", val2, val1);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
        elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
        PMD_DRV_LOG(DEBUG, "10G-base-T PMA status 0x%x->0x%x", val2, val1);
        link_up = ((val1 & 4) == 4);
        /* If link is up print the AN outcome of the SFX7101 PHY */
        if (link_up) {
                elink_cl45_read(sc, phy,
                                MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS,
                                &val2);
                vars->line_speed = ELINK_SPEED_10000;
                vars->duplex = DUPLEX_FULL;
                PMD_DRV_LOG(DEBUG, "SFX7101 AN status 0x%x->Master=%x",
                            val2, (val2 & (1 << 14)));
                elink_ext_phy_10G_an_resolve(sc, phy, vars);
                elink_ext_phy_resolve_fc(phy, params, vars);

                /* Read LP advertised speeds */
                if (val2 & (1 << 11))
                        vars->link_status |=
                            LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
        }
        return link_up;
}

static elink_status_t elink_7101_format_ver(uint32_t spirom_ver, uint8_t * str,
                                            uint16_t * len)
{
        if (*len < 5)
                return ELINK_STATUS_ERROR;
        str[0] = (spirom_ver & 0xFF);
        str[1] = (spirom_ver & 0xFF00) >> 8;
        str[2] = (spirom_ver & 0xFF0000) >> 16;
        str[3] = (spirom_ver & 0xFF000000) >> 24;
        str[4] = '\0';
        *len -= 5;
        return ELINK_STATUS_OK;
}

static void elink_7101_hw_reset(__rte_unused struct elink_phy *phy,
                                struct elink_params *params)
{
        /* Low power mode is controlled by GPIO 2 */
        elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_2,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
        /* The PHY reset is controlled by GPIO 1 */
        elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1,
                            MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port);
}

static void elink_7101_set_link_led(struct elink_phy *phy,
                                    struct elink_params *params, uint8_t mode)
{
        uint16_t val = 0;
        struct bnx2x_softc *sc = params->sc;
        switch (mode) {
        case ELINK_LED_MODE_FRONT_PANEL_OFF:
        case ELINK_LED_MODE_OFF:
                val = 2;
                break;
        case ELINK_LED_MODE_ON:
                val = 1;
                break;
        case ELINK_LED_MODE_OPER:
                val = 0;
                break;
        }
        elink_cl45_write(sc, phy,
                         MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LINK_LED_CNTL, val);
}

/******************************************************************/
/*                      STATIC PHY DECLARATION                    */
/******************************************************************/

static const struct elink_phy phy_null = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN,
        .addr = 0,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = 0,
        .media_type = ELINK_ETH_PHY_NOT_PRESENT,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) NULL,
        .read_status = (read_status_t) NULL,
        .link_reset = (link_reset_t) NULL,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) NULL,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_serdes = {
        .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = 0,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_2500baseX_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_xgxs_config_init,
        .read_status = (read_status_t) elink_link_settings_status,
        .link_reset = (link_reset_t) elink_int_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) NULL,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_xgxs = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = 0,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_2500baseX_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_CX4,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_xgxs_config_init,
        .read_status = (read_status_t) elink_link_settings_status,
        .link_reset = (link_reset_t) elink_int_link_reset,
        .config_loopback = (config_loopback_t) elink_set_xgxs_loopback,
        .format_fw_ver = (format_fw_ver_t) NULL,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) elink_xgxs_specific_func
};

static const struct elink_phy phy_warpcore = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_TX_ERROR_CHECK,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_20000baseKR2_Full |
                      ELINK_SUPPORTED_20000baseMLD2_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_UNSPECIFIED,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        /* req_duplex = */ 0,
        /* rsrv = */ 0,
        .config_init = (config_init_t) elink_warpcore_config_init,
        .read_status = (read_status_t) elink_warpcore_read_status,
        .link_reset = (link_reset_t) elink_warpcore_link_reset,
        .config_loopback = (config_loopback_t) elink_set_warpcore_loopback,
        .format_fw_ver = (format_fw_ver_t) NULL,
        .hw_reset = (hw_reset_t) elink_warpcore_hw_reset,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_7101 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_7101_config_init,
        .read_status = (read_status_t) elink_7101_read_status,
        .link_reset = (link_reset_t) elink_common_ext_link_reset,
        .config_loopback = (config_loopback_t) elink_7101_config_loopback,
        .format_fw_ver = (format_fw_ver_t) elink_7101_format_ver,
        .hw_reset = (hw_reset_t) elink_7101_hw_reset,
        .set_link_led = (set_link_led_t) elink_7101_set_link_led,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_8073 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = 0,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_2500baseX_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_KR,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8073_config_init,
        .read_status = (read_status_t) elink_8073_read_status,
        .link_reset = (link_reset_t) elink_8073_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_format_ver,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) elink_8073_specific_func
};

static const struct elink_phy phy_8705 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_XFP_FIBER,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8705_config_init,
        .read_status = (read_status_t) elink_8705_read_status,
        .link_reset = (link_reset_t) elink_common_ext_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_null_format_ver,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_8706 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_SFPP_10G_FIBER,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8706_config_init,
        .read_status = (read_status_t) elink_8706_read_status,
        .link_reset = (link_reset_t) elink_common_ext_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_format_ver,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_8726 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = (ELINK_FLAGS_INIT_XGXS_FIRST | ELINK_FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_NOT_PRESENT,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8726_config_init,
        .read_status = (read_status_t) elink_8726_read_status,
        .link_reset = (link_reset_t) elink_8726_link_reset,
        .config_loopback = (config_loopback_t) elink_8726_config_loopback,
        .format_fw_ver = (format_fw_ver_t) elink_format_ver,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) NULL,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_8727 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ | ELINK_FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_FIBRE |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_NOT_PRESENT,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8727_config_init,
        .read_status = (read_status_t) elink_8727_read_status,
        .link_reset = (link_reset_t) elink_8727_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_format_ver,
        .hw_reset = (hw_reset_t) elink_8727_hw_reset,
        .set_link_led = (set_link_led_t) elink_8727_set_link_led,
        .phy_specific_func = (phy_specific_func_t) elink_8727_specific_func
};

static const struct elink_phy phy_8481 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
            ELINK_FLAGS_REARM_LATCH_SIGNAL,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_8481_config_init,
        .read_status = (read_status_t) elink_848xx_read_status,
        .link_reset = (link_reset_t) elink_8481_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver,
        .hw_reset = (hw_reset_t) elink_8481_hw_reset,
        .set_link_led = (set_link_led_t) elink_848xx_set_link_led,
        .phy_specific_func = (phy_specific_func_t) NULL
};

static const struct elink_phy phy_84823 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
                  ELINK_FLAGS_REARM_LATCH_SIGNAL | ELINK_FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_848x3_config_init,
        .read_status = (read_status_t) elink_848xx_read_status,
        .link_reset = (link_reset_t) elink_848x3_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) elink_848xx_set_link_led,
        .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func
};

static const struct elink_phy phy_84833 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ |
                  ELINK_FLAGS_REARM_LATCH_SIGNAL |
                  ELINK_FLAGS_TX_ERROR_CHECK | ELINK_FLAGS_TEMPERATURE),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_848x3_config_init,
        .read_status = (read_status_t) elink_848xx_read_status,
        .link_reset = (link_reset_t) elink_848x3_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver,
        .hw_reset = (hw_reset_t) elink_84833_hw_reset_phy,
        .set_link_led = (set_link_led_t) elink_848xx_set_link_led,
        .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func
};

static const struct elink_phy phy_84834 = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ |
            ELINK_FLAGS_REARM_LATCH_SIGNAL,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_10000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        .req_duplex = 0,
        .rsrv = 0,
        .config_init = (config_init_t) elink_848x3_config_init,
        .read_status = (read_status_t) elink_848xx_read_status,
        .link_reset = (link_reset_t) elink_848x3_link_reset,
        .config_loopback = (config_loopback_t) NULL,
        .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver,
        .hw_reset = (hw_reset_t) elink_84833_hw_reset_phy,
        .set_link_led = (set_link_led_t) elink_848xx_set_link_led,
        .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func
};

static const struct elink_phy phy_54618se = {
        .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE,
        .addr = 0xff,
        .def_md_devad = 0,
        .flags = ELINK_FLAGS_INIT_XGXS_FIRST,
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl = 0,
        .supported = (ELINK_SUPPORTED_10baseT_Half |
                      ELINK_SUPPORTED_10baseT_Full |
                      ELINK_SUPPORTED_100baseT_Half |
                      ELINK_SUPPORTED_100baseT_Full |
                      ELINK_SUPPORTED_1000baseT_Full |
                      ELINK_SUPPORTED_TP |
                      ELINK_SUPPORTED_Autoneg |
                      ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause),
        .media_type = ELINK_ETH_PHY_BASE_T,
        .ver_addr = 0,
        .req_flow_ctrl = 0,
        .req_line_speed = 0,
        .speed_cap_mask = 0,
        /* req_duplex = */ 0,
        /* rsrv = */ 0,
        .config_init = (config_init_t) elink_54618se_config_init,
        .read_status = (read_status_t) elink_54618se_read_status,
        .link_reset = (link_reset_t) elink_54618se_link_reset,
        .config_loopback = (config_loopback_t) elink_54618se_config_loopback,
        .format_fw_ver = (format_fw_ver_t) NULL,
        .hw_reset = (hw_reset_t) NULL,
        .set_link_led = (set_link_led_t) elink_5461x_set_link_led,
        .phy_specific_func = (phy_specific_func_t) elink_54618se_specific_func
};

/*****************************************************************/
/*                                                               */
/* Populate the phy according. Main function: elink_populate_phy   */
/*                                                               */
/*****************************************************************/

static void elink_populate_preemphasis(struct bnx2x_softc *sc,
                                       uint32_t shmem_base,
                                       struct elink_phy *phy, uint8_t port,
                                       uint8_t phy_index)
{
        /* Get the 4 lanes xgxs config rx and tx */
        uint32_t rx = 0, tx = 0, i;
        for (i = 0; i < 2; i++) {
                /* INT_PHY and ELINK_EXT_PHY1 share the same value location in
                 * the shmem. When num_phys is greater than 1, than this value
                 * applies only to ELINK_EXT_PHY1
                 */
                if (phy_index == ELINK_INT_PHY || phy_index == ELINK_EXT_PHY1) {
                        rx = REG_RD(sc, shmem_base +
                                    offsetof(struct shmem_region,
                                             dev_info.port_hw_config[port].
                                             xgxs_config_rx[i << 1]));

                        tx = REG_RD(sc, shmem_base +
                                    offsetof(struct shmem_region,
                                             dev_info.port_hw_config[port].
                                             xgxs_config_tx[i << 1]));
                } else {
                        rx = REG_RD(sc, shmem_base +
                                    offsetof(struct shmem_region,
                                             dev_info.port_hw_config[port].
                                             xgxs_config2_rx[i << 1]));

                        tx = REG_RD(sc, shmem_base +
                                    offsetof(struct shmem_region,
                                             dev_info.port_hw_config[port].
                                             xgxs_config2_rx[i << 1]));
                }

                phy->rx_preemphasis[i << 1] = ((rx >> 16) & 0xffff);
                phy->rx_preemphasis[(i << 1) + 1] = (rx & 0xffff);

                phy->tx_preemphasis[i << 1] = ((tx >> 16) & 0xffff);
                phy->tx_preemphasis[(i << 1) + 1] = (tx & 0xffff);
        }
}

static uint32_t elink_get_ext_phy_config(struct bnx2x_softc *sc,
                                         uint32_t shmem_base, uint8_t phy_index,
                                         uint8_t port)
{
        uint32_t ext_phy_config = 0;
        switch (phy_index) {
        case ELINK_EXT_PHY1:
                ext_phy_config = REG_RD(sc, shmem_base +
                                        offsetof(struct shmem_region,
                                                 dev_info.port_hw_config[port].
                                                 external_phy_config));
                break;
        case ELINK_EXT_PHY2:
                ext_phy_config = REG_RD(sc, shmem_base +
                                        offsetof(struct shmem_region,
                                                 dev_info.port_hw_config[port].
                                                 external_phy_config2));
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Invalid phy_index %d", phy_index);
                return ELINK_STATUS_ERROR;
        }

        return ext_phy_config;
}

static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
                                             uint32_t shmem_base, uint8_t port,
                                             struct elink_phy *phy)
{
        uint32_t phy_addr;
        __rte_unused uint32_t chip_id;
        uint32_t switch_cfg = (REG_RD(sc, shmem_base +
                                      offsetof(struct shmem_region,
                                               dev_info.
                                               port_feature_config[port].
                                               link_config)) &
                               PORT_FEATURE_CONNECTED_SWITCH_MASK);
        chip_id =
            (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
            ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);

        PMD_DRV_LOG(DEBUG, ":chip_id = 0x%x", chip_id);
        if (USES_WARPCORE(sc)) {
                uint32_t serdes_net_if;
                phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
                *phy = phy_warpcore;
                if (REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR) == 0x3)
                        phy->flags |= ELINK_FLAGS_4_PORT_MODE;
                else
                        phy->flags &= ~ELINK_FLAGS_4_PORT_MODE;
                /* Check Dual mode */
                serdes_net_if = (REG_RD(sc, shmem_base +
                                        offsetof(struct shmem_region,
                                                 dev_info.port_hw_config[port].
                                                 default_cfg)) &
                                 PORT_HW_CFG_NET_SERDES_IF_MASK);
                /* Set the appropriate supported and flags indications per
                 * interface type of the chip
                 */
                switch (serdes_net_if) {
                case PORT_HW_CFG_NET_SERDES_IF_SGMII:
                        phy->supported &= (ELINK_SUPPORTED_10baseT_Half |
                                           ELINK_SUPPORTED_10baseT_Full |
                                           ELINK_SUPPORTED_100baseT_Half |
                                           ELINK_SUPPORTED_100baseT_Full |
                                           ELINK_SUPPORTED_1000baseT_Full |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Autoneg |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        phy->media_type = ELINK_ETH_PHY_BASE_T;
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_XFI:
                        phy->supported &= (ELINK_SUPPORTED_1000baseT_Full |
                                           ELINK_SUPPORTED_10000baseT_Full |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        phy->media_type = ELINK_ETH_PHY_XFP_FIBER;
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_SFI:
                        phy->supported &= (ELINK_SUPPORTED_1000baseT_Full |
                                           ELINK_SUPPORTED_10000baseT_Full |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        phy->media_type = ELINK_ETH_PHY_SFPP_10G_FIBER;
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_KR:
                        phy->media_type = ELINK_ETH_PHY_KR;
                        phy->supported &= (ELINK_SUPPORTED_1000baseT_Full |
                                           ELINK_SUPPORTED_10000baseT_Full |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Autoneg |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_DXGXS:
                        phy->media_type = ELINK_ETH_PHY_KR;
                        phy->flags |= ELINK_FLAGS_WC_DUAL_MODE;
                        phy->supported &= (ELINK_SUPPORTED_20000baseMLD2_Full |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        break;
                case PORT_HW_CFG_NET_SERDES_IF_KR2:
                        phy->media_type = ELINK_ETH_PHY_KR;
                        phy->flags |= ELINK_FLAGS_WC_DUAL_MODE;
                        phy->supported &= (ELINK_SUPPORTED_20000baseKR2_Full |
                                           ELINK_SUPPORTED_10000baseT_Full |
                                           ELINK_SUPPORTED_1000baseT_Full |
                                           ELINK_SUPPORTED_Autoneg |
                                           ELINK_SUPPORTED_FIBRE |
                                           ELINK_SUPPORTED_Pause |
                                           ELINK_SUPPORTED_Asym_Pause);
                        phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Unknown WC interface type 0x%x",
                                    serdes_net_if);
                        break;
                }

                /* Enable MDC/MDIO work-around for E3 A0 since free running MDC
                 * was not set as expected. For B0, ECO will be enabled so there
                 * won't be an issue there
                 */
                if (CHIP_REV(sc) == CHIP_REV_Ax)
                        phy->flags |= ELINK_FLAGS_MDC_MDIO_WA;
                else
                        phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_B0;
        } else {
                switch (switch_cfg) {
                case ELINK_SWITCH_CFG_1G:
                        phy_addr = REG_RD(sc,
                                          NIG_REG_SERDES0_CTRL_PHY_ADDR +
                                          port * 0x10);
                        *phy = phy_serdes;
                        break;
                case ELINK_SWITCH_CFG_10G:
                        phy_addr = REG_RD(sc,
                                          NIG_REG_XGXS0_CTRL_PHY_ADDR +
                                          port * 0x18);
                        *phy = phy_xgxs;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Invalid switch_cfg");
                        return ELINK_STATUS_ERROR;
                }
        }
        phy->addr = (uint8_t) phy_addr;
        phy->mdio_ctrl = elink_get_emac_base(sc,
                                             SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH,
                                             port);
        if (CHIP_IS_E2(sc))
                phy->def_md_devad = ELINK_E2_DEFAULT_PHY_DEV_ADDR;
        else
                phy->def_md_devad = ELINK_DEFAULT_PHY_DEV_ADDR;

        PMD_DRV_LOG(DEBUG, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x",
                    port, phy->addr, phy->mdio_ctrl);

        elink_populate_preemphasis(sc, shmem_base, phy, port, ELINK_INT_PHY);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
                                             uint8_t phy_index,
                                             uint32_t shmem_base,
                                             uint32_t shmem2_base,
                                             uint8_t port,
                                             struct elink_phy *phy)
{
        uint32_t ext_phy_config, phy_type, config2;
        uint32_t mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH;
        ext_phy_config = elink_get_ext_phy_config(sc, shmem_base,
                                                  phy_index, port);
        phy_type = ELINK_XGXS_EXT_PHY_TYPE(ext_phy_config);
        /* Select the phy type */
        switch (phy_type) {
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073:
                mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED;
                *phy = phy_8073;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705:
                *phy = phy_8705;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706:
                *phy = phy_8706;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726:
                mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1;
                *phy = phy_8726;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727_NOC:
                /* BNX2X8727_NOC => BNX2X8727 no over current */
                mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1;
                *phy = phy_8727;
                phy->flags |= ELINK_FLAGS_NOC;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
                mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1;
                *phy = phy_8727;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481:
                *phy = phy_8481;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823:
                *phy = phy_84823;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833:
                *phy = phy_84833;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834:
                *phy = phy_84834;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54616:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE:
                *phy = phy_54618se;
                if (phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE)
                        phy->flags |= ELINK_FLAGS_EEE;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
                *phy = phy_7101;
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
                *phy = phy_null;
                return ELINK_STATUS_ERROR;
        default:
                *phy = phy_null;
                /* In case external PHY wasn't found */
                if ((phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
                    (phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
                        return ELINK_STATUS_ERROR;
                return ELINK_STATUS_OK;
        }

        phy->addr = ELINK_XGXS_EXT_PHY_ADDR(ext_phy_config);
        elink_populate_preemphasis(sc, shmem_base, phy, port, phy_index);

        /* The shmem address of the phy version is located on different
         * structures. In case this structure is too old, do not set
         * the address
         */
        config2 = REG_RD(sc, shmem_base + offsetof(struct shmem_region,
                                                   dev_info.shared_hw_config.
                                                   config2));
        if (phy_index == ELINK_EXT_PHY1) {
                phy->ver_addr = shmem_base + offsetof(struct shmem_region,
                                                      port_mb[port].
                                                      ext_phy_fw_version);

                /* Check specific mdc mdio settings */
                if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK)
                        mdc_mdio_access = config2 &
                            SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK;
        } else {
                uint32_t size = REG_RD(sc, shmem2_base);

                if (size > offsetof(struct shmem2_region, ext_phy_fw_version2)) {
                        phy->ver_addr = shmem2_base +
                            offsetof(struct shmem2_region,
                                     ext_phy_fw_version2[port]);
                }
                /* Check specific mdc mdio settings */
                if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK)
                        mdc_mdio_access = (config2 &
                                           SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK)
                            >> (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT -
                                SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT);
        }
        phy->mdio_ctrl = elink_get_emac_base(sc, mdc_mdio_access, port);

        if (((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
             (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) &&
            (phy->ver_addr)) {
                /* Remove 100Mb link supported for BNX2X84833/4 when phy fw
                 * version lower than or equal to 1.39
                 */
                uint32_t raw_ver = REG_RD(sc, phy->ver_addr);
                if (((raw_ver & 0x7F) <= 39) && (((raw_ver & 0xF80) >> 7) <= 1))
                        phy->supported &= ~(ELINK_SUPPORTED_100baseT_Half |
                                            ELINK_SUPPORTED_100baseT_Full);
        }

        PMD_DRV_LOG(DEBUG, "phy_type 0x%x port %d found in index %d",
                    phy_type, port, phy_index);
        PMD_DRV_LOG(DEBUG, "             addr=0x%x, mdio_ctl=0x%x",
                    phy->addr, phy->mdio_ctrl);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_populate_phy(struct bnx2x_softc *sc,
                                         uint8_t phy_index, uint32_t shmem_base,
                                         uint32_t shmem2_base, uint8_t port,
                                         struct elink_phy *phy)
{
        elink_status_t status = ELINK_STATUS_OK;
        phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN;
        if (phy_index == ELINK_INT_PHY)
                return elink_populate_int_phy(sc, shmem_base, port, phy);
        status = elink_populate_ext_phy(sc, phy_index, shmem_base, shmem2_base,
                                        port, phy);
        return status;
}

static void elink_phy_def_cfg(struct elink_params *params,
                              struct elink_phy *phy, uint8_t phy_index)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t link_config;
        /* Populate the default phy configuration for MF mode */
        if (phy_index == ELINK_EXT_PHY2) {
                link_config = REG_RD(sc, params->shmem_base +
                                     offsetof(struct shmem_region,
                                              dev_info.port_feature_config
                                              [params->port].link_config2));
                phy->speed_cap_mask =
                    REG_RD(sc,
                           params->shmem_base + offsetof(struct shmem_region,
                                                         dev_info.port_hw_config
                                                         [params->port].
                                                         speed_capability_mask2));
        } else {
                link_config = REG_RD(sc, params->shmem_base +
                                     offsetof(struct shmem_region,
                                              dev_info.port_feature_config
                                              [params->port].link_config));
                phy->speed_cap_mask =
                    REG_RD(sc,
                           params->shmem_base + offsetof(struct shmem_region,
                                                         dev_info.port_hw_config
                                                         [params->port].
                                                         speed_capability_mask));
        }

        PMD_DRV_LOG(DEBUG,
                    "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x",
                    phy_index, link_config, phy->speed_cap_mask);

        phy->req_duplex = DUPLEX_FULL;
        switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
        case PORT_FEATURE_LINK_SPEED_10M_HALF:
                phy->req_duplex = DUPLEX_HALF;
        case PORT_FEATURE_LINK_SPEED_10M_FULL:
                phy->req_line_speed = ELINK_SPEED_10;
                break;
        case PORT_FEATURE_LINK_SPEED_100M_HALF:
                phy->req_duplex = DUPLEX_HALF;
        case PORT_FEATURE_LINK_SPEED_100M_FULL:
                phy->req_line_speed = ELINK_SPEED_100;
                break;
        case PORT_FEATURE_LINK_SPEED_1G:
                phy->req_line_speed = ELINK_SPEED_1000;
                break;
        case PORT_FEATURE_LINK_SPEED_2_5G:
                phy->req_line_speed = ELINK_SPEED_2500;
                break;
        case PORT_FEATURE_LINK_SPEED_10G_CX4:
                phy->req_line_speed = ELINK_SPEED_10000;
                break;
        default:
                phy->req_line_speed = ELINK_SPEED_AUTO_NEG;
                break;
        }

        switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) {
        case PORT_FEATURE_FLOW_CONTROL_AUTO:
                phy->req_flow_ctrl = ELINK_FLOW_CTRL_AUTO;
                break;
        case PORT_FEATURE_FLOW_CONTROL_TX:
                phy->req_flow_ctrl = ELINK_FLOW_CTRL_TX;
                break;
        case PORT_FEATURE_FLOW_CONTROL_RX:
                phy->req_flow_ctrl = ELINK_FLOW_CTRL_RX;
                break;
        case PORT_FEATURE_FLOW_CONTROL_BOTH:
                phy->req_flow_ctrl = ELINK_FLOW_CTRL_BOTH;
                break;
        default:
                phy->req_flow_ctrl = ELINK_FLOW_CTRL_NONE;
                break;
        }
}

uint32_t elink_phy_selection(struct elink_params *params)
{
        uint32_t phy_config_swapped, prio_cfg;
        uint32_t return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT;

        phy_config_swapped = params->multi_phy_config &
            PORT_HW_CFG_PHY_SWAPPED_ENABLED;

        prio_cfg = params->multi_phy_config & PORT_HW_CFG_PHY_SELECTION_MASK;

        if (phy_config_swapped) {
                switch (prio_cfg) {
                case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                        return_cfg =
                            PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY;
                        break;
                case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
                        return_cfg =
                            PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY;
                        break;
                case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
                        return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
                        break;
                case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
                        return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
                        break;
                }
        } else
                return_cfg = prio_cfg;

        return return_cfg;
}

elink_status_t elink_phy_probe(struct elink_params * params)
{
        uint8_t phy_index, actual_phy_idx;
        uint32_t phy_config_swapped, sync_offset, media_types;
        struct bnx2x_softc *sc = params->sc;
        struct elink_phy *phy;
        params->num_phys = 0;
        PMD_DRV_LOG(DEBUG, "Begin phy probe");
#ifdef ELINK_INCLUDE_EMUL
        if (CHIP_REV_IS_EMUL(sc))
                return ELINK_STATUS_OK;
#endif
        phy_config_swapped = params->multi_phy_config &
            PORT_HW_CFG_PHY_SWAPPED_ENABLED;

        for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) {
                actual_phy_idx = phy_index;
                if (phy_config_swapped) {
                        if (phy_index == ELINK_EXT_PHY1)
                                actual_phy_idx = ELINK_EXT_PHY2;
                        else if (phy_index == ELINK_EXT_PHY2)
                                actual_phy_idx = ELINK_EXT_PHY1;
                }
                PMD_DRV_LOG(DEBUG, "phy_config_swapped %x, phy_index %x,"
                            " actual_phy_idx %x", phy_config_swapped,
                            phy_index, actual_phy_idx);
                phy = &params->phy[actual_phy_idx];
                if (elink_populate_phy(sc, phy_index, params->shmem_base,
                                       params->shmem2_base, params->port,
                                       phy) != ELINK_STATUS_OK) {
                        params->num_phys = 0;
                        PMD_DRV_LOG(DEBUG, "phy probe failed in phy index %d",
                                    phy_index);
                        for (phy_index = ELINK_INT_PHY;
                             phy_index < ELINK_MAX_PHYS; phy_index++)
                                *phy = phy_null;
                        return ELINK_STATUS_ERROR;
                }
                if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)
                        break;

                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET)
                        phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK;

                if (!(params->feature_config_flags &
                      ELINK_FEATURE_CONFIG_MT_SUPPORT))
                        phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_G;

                sync_offset = params->shmem_base +
                    offsetof(struct shmem_region,
                             dev_info.port_hw_config[params->port].media_type);
                media_types = REG_RD(sc, sync_offset);

                /* Update media type for non-PMF sync only for the first time
                 * In case the media type changes afterwards, it will be updated
                 * using the update_status function
                 */
                if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK <<
                                    (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
                                     actual_phy_idx))) == 0) {
                        media_types |= ((phy->media_type &
                                         PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) <<
                                        (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT *
                                         actual_phy_idx));
                }
                REG_WR(sc, sync_offset, media_types);

                elink_phy_def_cfg(params, phy, phy_index);
                params->num_phys++;
        }

        PMD_DRV_LOG(DEBUG, "End phy probe. #phys found %x", params->num_phys);
        return ELINK_STATUS_OK;
}

#ifdef ELINK_INCLUDE_EMUL
static elink_status_t elink_init_e3_emul_mac(struct elink_params *params,
                                             struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->line_speed = params->req_line_speed[0];
        /* In case link speed is auto, set speed the highest as possible */
        if (params->req_line_speed[0] == ELINK_SPEED_AUTO_NEG) {
                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC)
                        vars->line_speed = ELINK_SPEED_2500;
                else if (elink_is_4_port_mode(sc))
                        vars->line_speed = ELINK_SPEED_10000;
                else
                        vars->line_speed = ELINK_SPEED_20000;
        }
        if (vars->line_speed < ELINK_SPEED_10000) {
                if ((params->feature_config_flags &
                     ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC)) {
                        PMD_DRV_LOG(DEBUG, "Invalid line speed %d while UMAC is"
                                    " disabled!", params->req_line_speed[0]);
                        return ELINK_STATUS_ERROR;
                }
                switch (vars->line_speed) {
                case ELINK_SPEED_10:
                        vars->link_status = ELINK_LINK_10TFD;
                        break;
                case ELINK_SPEED_100:
                        vars->link_status = ELINK_LINK_100TXFD;
                        break;
                case ELINK_SPEED_1000:
                        vars->link_status = ELINK_LINK_1000TFD;
                        break;
                case ELINK_SPEED_2500:
                        vars->link_status = ELINK_LINK_2500TFD;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Invalid line speed %d for UMAC",
                                    vars->line_speed);
                        return ELINK_STATUS_ERROR;
                }
                vars->link_status |= LINK_STATUS_LINK_UP;

                if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
                        elink_umac_enable(params, vars, 1);
                else
                        elink_umac_enable(params, vars, 0);
        } else {
                /* Link speed >= 10000 requires XMAC enabled */
                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC) {
                        PMD_DRV_LOG(DEBUG, "Invalid line speed %d while XMAC is"
                                    " disabled!", params->req_line_speed[0]);
                        return ELINK_STATUS_ERROR;
                }
                /* Check link speed */
                switch (vars->line_speed) {
                case ELINK_SPEED_10000:
                        vars->link_status = ELINK_LINK_10GTFD;
                        break;
                case ELINK_SPEED_20000:
                        vars->link_status = ELINK_LINK_20GTFD;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Invalid line speed %d for XMAC",
                                    vars->line_speed);
                        return ELINK_STATUS_ERROR;
                }
                vars->link_status |= LINK_STATUS_LINK_UP;
                if (params->loopback_mode == ELINK_LOOPBACK_XMAC)
                        elink_xmac_enable(params, vars, 1);
                else
                        elink_xmac_enable(params, vars, 0);
        }
        return ELINK_STATUS_OK;
}

static elink_status_t elink_init_emul(struct elink_params *params,
                                      struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        if (CHIP_IS_E3(sc)) {
                if (elink_init_e3_emul_mac(params, vars) != ELINK_STATUS_OK)
                        return ELINK_STATUS_ERROR;
        } else {
                if (params->feature_config_flags &
                    ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC) {
                        vars->line_speed = ELINK_SPEED_1000;
                        vars->link_status = (LINK_STATUS_LINK_UP |
                                             ELINK_LINK_1000XFD);
                        if (params->loopback_mode == ELINK_LOOPBACK_EMAC)
                                elink_emac_enable(params, vars, 1);
                        else
                                elink_emac_enable(params, vars, 0);
                } else {
                        vars->line_speed = ELINK_SPEED_10000;
                        vars->link_status = (LINK_STATUS_LINK_UP |
                                             ELINK_LINK_10GTFD);
                        if (params->loopback_mode == ELINK_LOOPBACK_BMAC)
                                elink_bmac_enable(params, vars, 1, 1);
                        else
                                elink_bmac_enable(params, vars, 0, 1);
                }
        }
        vars->link_up = 1;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;

        if (CHIP_IS_E1x(sc))
                elink_pbf_update(params, vars->flow_ctrl, vars->line_speed);
        /* Disable drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);

        /* update shared memory */
        elink_update_mng(params, vars->link_status);
        return ELINK_STATUS_OK;
}
#endif
#ifdef ELINK_INCLUDE_FPGA
static elink_status_t elink_init_fpga(struct elink_params *params,
                                      struct elink_vars *vars)
{
        /* Enable on E1.5 FPGA */
        struct bnx2x_softc *sc = params->sc;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->flow_ctrl = (ELINK_FLOW_CTRL_TX | ELINK_FLOW_CTRL_RX);
        vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
                              LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
        if (CHIP_IS_E3(sc)) {
                vars->line_speed = params->req_line_speed[0];
                switch (vars->line_speed) {
                case ELINK_SPEED_AUTO_NEG:
                        vars->line_speed = ELINK_SPEED_2500;
                case ELINK_SPEED_2500:
                        vars->link_status = ELINK_LINK_2500TFD;
                        break;
                case ELINK_SPEED_1000:
                        vars->link_status = ELINK_LINK_1000XFD;
                        break;
                case ELINK_SPEED_100:
                        vars->link_status = ELINK_LINK_100TXFD;
                        break;
                case ELINK_SPEED_10:
                        vars->link_status = ELINK_LINK_10TFD;
                        break;
                default:
                        PMD_DRV_LOG(DEBUG, "Invalid link speed %d",
                                    params->req_line_speed[0]);
                        return ELINK_STATUS_ERROR;
                }
                vars->link_status |= LINK_STATUS_LINK_UP;
                if (params->loopback_mode == ELINK_LOOPBACK_UMAC)
                        elink_umac_enable(params, vars, 1);
                else
                        elink_umac_enable(params, vars, 0);
        } else {
                vars->line_speed = ELINK_SPEED_10000;
                vars->link_status = (LINK_STATUS_LINK_UP | ELINK_LINK_10GTFD);
                if (params->loopback_mode == ELINK_LOOPBACK_EMAC)
                        elink_emac_enable(params, vars, 1);
                else
                        elink_emac_enable(params, vars, 0);
        }
        vars->link_up = 1;

        if (CHIP_IS_E1x(sc))
                elink_pbf_update(params, vars->flow_ctrl, vars->line_speed);
        /* Disable drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);

        /* Update shared memory */
        elink_update_mng(params, vars->link_status);
        return ELINK_STATUS_OK;
}
#endif
static void elink_init_bmac_loopback(struct elink_params *params,
                                     struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->link_up = 1;
        vars->line_speed = ELINK_SPEED_10000;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->mac_type = ELINK_MAC_TYPE_BMAC;

        vars->phy_flags = PHY_XGXS_FLAG;

        elink_xgxs_deassert(params);

        /* Set bmac loopback */
        elink_bmac_enable(params, vars, 1, 1);

        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}

static void elink_init_emac_loopback(struct elink_params *params,
                                     struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->link_up = 1;
        vars->line_speed = ELINK_SPEED_1000;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->mac_type = ELINK_MAC_TYPE_EMAC;

        vars->phy_flags = PHY_XGXS_FLAG;

        elink_xgxs_deassert(params);
        /* Set bmac loopback */
        elink_emac_enable(params, vars, 1);
        elink_emac_program(params, vars);
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}

static void elink_init_xmac_loopback(struct elink_params *params,
                                     struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->link_up = 1;
        if (!params->req_line_speed[0])
                vars->line_speed = ELINK_SPEED_10000;
        else
                vars->line_speed = params->req_line_speed[0];
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->mac_type = ELINK_MAC_TYPE_XMAC;
        vars->phy_flags = PHY_XGXS_FLAG;
        /* Set WC to loopback mode since link is required to provide clock
         * to the XMAC in 20G mode
         */
        elink_set_aer_mmd(params, &params->phy[0]);
        elink_warpcore_reset_lane(sc, &params->phy[0], 0);
        params->phy[ELINK_INT_PHY].config_loopback(&params->phy[ELINK_INT_PHY],
                                                   params);

        elink_xmac_enable(params, vars, 1);
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}

static void elink_init_umac_loopback(struct elink_params *params,
                                     struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->link_up = 1;
        vars->line_speed = ELINK_SPEED_1000;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->mac_type = ELINK_MAC_TYPE_UMAC;
        vars->phy_flags = PHY_XGXS_FLAG;
        elink_umac_enable(params, vars, 1);

        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
}

static void elink_init_xgxs_loopback(struct elink_params *params,
                                     struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        struct elink_phy *int_phy = &params->phy[ELINK_INT_PHY];
        vars->link_up = 1;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->duplex = DUPLEX_FULL;
        if (params->req_line_speed[0] == ELINK_SPEED_1000)
                vars->line_speed = ELINK_SPEED_1000;
        else if ((params->req_line_speed[0] == ELINK_SPEED_20000) ||
                 (int_phy->flags & ELINK_FLAGS_WC_DUAL_MODE))
                vars->line_speed = ELINK_SPEED_20000;
        else
                vars->line_speed = ELINK_SPEED_10000;

        if (!USES_WARPCORE(sc))
                elink_xgxs_deassert(params);
        elink_link_initialize(params, vars);

        if (params->req_line_speed[0] == ELINK_SPEED_1000) {
                if (USES_WARPCORE(sc))
                        elink_umac_enable(params, vars, 0);
                else {
                        elink_emac_program(params, vars);
                        elink_emac_enable(params, vars, 0);
                }
        } else {
                if (USES_WARPCORE(sc))
                        elink_xmac_enable(params, vars, 0);
                else
                        elink_bmac_enable(params, vars, 0, 1);
        }

        if (params->loopback_mode == ELINK_LOOPBACK_XGXS) {
                /* Set 10G XGXS loopback */
                int_phy->config_loopback(int_phy, params);
        } else {
                /* Set external phy loopback */
                uint8_t phy_index;
                for (phy_index = ELINK_EXT_PHY1;
                     phy_index < params->num_phys; phy_index++)
                        if (params->phy[phy_index].config_loopback)
                                params->phy[phy_index].config_loopback(&params->
                                                                       phy
                                                                       [phy_index],
                                                                       params);
        }
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);

        elink_set_led(params, vars, ELINK_LED_MODE_OPER, vars->line_speed);
}

void elink_set_rx_filter(struct elink_params *params, uint8_t en)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t val = en * 0x1F;

        /* Open / close the gate between the NIG and the BRB */
        if (!CHIP_IS_E1x(sc))
                val |= en * 0x20;
        REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + params->port * 4, val);

        REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + params->port * 4, en * 0x3);

        REG_WR(sc, (params->port ? NIG_REG_LLH1_BRB1_NOT_MCP :
                    NIG_REG_LLH0_BRB1_NOT_MCP), en);
}

static elink_status_t elink_avoid_link_flap(struct elink_params *params,
                                            struct elink_vars *vars)
{
        uint32_t phy_idx;
        uint32_t dont_clear_stat, lfa_sts;
        struct bnx2x_softc *sc = params->sc;

        /* Sync the link parameters */
        elink_link_status_update(params, vars);

        /*
         * The module verification was already done by previous link owner,
         * so this call is meant only to get warning message
         */

        for (phy_idx = ELINK_INT_PHY; phy_idx < params->num_phys; phy_idx++) {
                struct elink_phy *phy = &params->phy[phy_idx];
                if (phy->phy_specific_func) {
                        PMD_DRV_LOG(DEBUG, "Calling PHY specific func");
                        phy->phy_specific_func(phy, params, ELINK_PHY_INIT);
                }
                if ((phy->media_type == ELINK_ETH_PHY_SFPP_10G_FIBER) ||
                    (phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER) ||
                    (phy->media_type == ELINK_ETH_PHY_DA_TWINAX))
                        elink_verify_sfp_module(phy, params);
        }
        lfa_sts = REG_RD(sc, params->lfa_base +
                         offsetof(struct shmem_lfa, lfa_sts));

        dont_clear_stat = lfa_sts & SHMEM_LFA_DONT_CLEAR_STAT;

        /* Re-enable the NIG/MAC */
        if (CHIP_IS_E3(sc)) {
                if (!dont_clear_stat) {
                        REG_WR(sc, GRCBASE_MISC +
                               MISC_REGISTERS_RESET_REG_2_CLEAR,
                               (MISC_REGISTERS_RESET_REG_2_MSTAT0 <<
                                params->port));
                        REG_WR(sc, GRCBASE_MISC +
                               MISC_REGISTERS_RESET_REG_2_SET,
                               (MISC_REGISTERS_RESET_REG_2_MSTAT0 <<
                                params->port));
                }
                if (vars->line_speed < ELINK_SPEED_10000)
                        elink_umac_enable(params, vars, 0);
                else
                        elink_xmac_enable(params, vars, 0);
        } else {
                if (vars->line_speed < ELINK_SPEED_10000)
                        elink_emac_enable(params, vars, 0);
                else
                        elink_bmac_enable(params, vars, 0, !dont_clear_stat);
        }

        /* Increment LFA count */
        lfa_sts = ((lfa_sts & ~LINK_FLAP_AVOIDANCE_COUNT_MASK) |
                   (((((lfa_sts & LINK_FLAP_AVOIDANCE_COUNT_MASK) >>
                       LINK_FLAP_AVOIDANCE_COUNT_OFFSET) + 1) & 0xff)
                    << LINK_FLAP_AVOIDANCE_COUNT_OFFSET));
        /* Clear link flap reason */
        lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK;

        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, lfa_sts), lfa_sts);

        /* Disable NIG DRAIN */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);

        /* Enable interrupts */
        elink_link_int_enable(params);
        return ELINK_STATUS_OK;
}

static void elink_cannot_avoid_link_flap(struct elink_params *params,
                                         struct elink_vars *vars,
                                         int lfa_status)
{
        uint32_t lfa_sts, cfg_idx, tmp_val;
        struct bnx2x_softc *sc = params->sc;

        elink_link_reset(params, vars, 1);

        if (!params->lfa_base)
                return;
        /* Store the new link parameters */
        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, req_duplex),
               params->req_duplex[0] | (params->req_duplex[1] << 16));

        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, req_flow_ctrl),
               params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16));

        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, req_line_speed),
               params->req_line_speed[0] | (params->req_line_speed[1] << 16));

        for (cfg_idx = 0; cfg_idx < SHMEM_LINK_CONFIG_SIZE; cfg_idx++) {
                REG_WR(sc, params->lfa_base +
                       offsetof(struct shmem_lfa,
                                speed_cap_mask[cfg_idx]),
                       params->speed_cap_mask[cfg_idx]);
        }

        tmp_val = REG_RD(sc, params->lfa_base +
                         offsetof(struct shmem_lfa, additional_config));
        tmp_val &= ~REQ_FC_AUTO_ADV_MASK;
        tmp_val |= params->req_fc_auto_adv;

        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, additional_config), tmp_val);

        lfa_sts = REG_RD(sc, params->lfa_base +
                         offsetof(struct shmem_lfa, lfa_sts));

        /* Clear the "Don't Clear Statistics" bit, and set reason */
        lfa_sts &= ~SHMEM_LFA_DONT_CLEAR_STAT;

        /* Set link flap reason */
        lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK;
        lfa_sts |= ((lfa_status & LFA_LINK_FLAP_REASON_MASK) <<
                    LFA_LINK_FLAP_REASON_OFFSET);

        /* Increment link flap counter */
        lfa_sts = ((lfa_sts & ~LINK_FLAP_COUNT_MASK) |
                   (((((lfa_sts & LINK_FLAP_COUNT_MASK) >>
                       LINK_FLAP_COUNT_OFFSET) + 1) & 0xff)
                    << LINK_FLAP_COUNT_OFFSET));
        REG_WR(sc, params->lfa_base +
               offsetof(struct shmem_lfa, lfa_sts), lfa_sts);
        /* Proceed with regular link initialization */
}

elink_status_t elink_phy_init(struct elink_params *params,
                              struct elink_vars *vars)
{
        int lfa_status;
        struct bnx2x_softc *sc = params->sc;
        PMD_DRV_LOG(DEBUG, "Phy Initialization started");
        PMD_DRV_LOG(DEBUG, "(1) req_speed %d, req_flowctrl %d",
                    params->req_line_speed[0], params->req_flow_ctrl[0]);
        PMD_DRV_LOG(DEBUG, "(2) req_speed %d, req_flowctrl %d",
                    params->req_line_speed[1], params->req_flow_ctrl[1]);
        PMD_DRV_LOG(DEBUG, "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv);
        vars->link_status = 0;
        vars->phy_link_up = 0;
        vars->link_up = 0;
        vars->line_speed = 0;
        vars->duplex = DUPLEX_FULL;
        vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
        vars->mac_type = ELINK_MAC_TYPE_NONE;
        vars->phy_flags = 0;
        vars->check_kr2_recovery_cnt = 0;
        params->link_flags = ELINK_PHY_INITIALIZED;
        /* Driver opens NIG-BRB filters */
        elink_set_rx_filter(params, 1);
        /* Check if link flap can be avoided */
        lfa_status = elink_check_lfa(params);

        if (lfa_status == 0) {
                PMD_DRV_LOG(DEBUG, "Link Flap Avoidance in progress");
                return elink_avoid_link_flap(params, vars);
        }

        PMD_DRV_LOG(DEBUG, "Cannot avoid link flap lfa_sta=0x%x", lfa_status);
        elink_cannot_avoid_link_flap(params, vars, lfa_status);

        /* Disable attentions */
        elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + params->port * 4,
                       (ELINK_NIG_MASK_XGXS0_LINK_STATUS |
                        ELINK_NIG_MASK_XGXS0_LINK10G |
                        ELINK_NIG_MASK_SERDES0_LINK_STATUS |
                        ELINK_NIG_MASK_MI_INT));
#ifdef ELINK_INCLUDE_EMUL
        if (!(params->feature_config_flags &
              ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC))
#endif

                elink_emac_init(params);

        if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
                vars->link_status |= LINK_STATUS_PFC_ENABLED;

        if ((params->num_phys == 0) && !CHIP_REV_IS_SLOW(sc)) {
                PMD_DRV_LOG(DEBUG, "No phy found for initialization !!");
                return ELINK_STATUS_ERROR;
        }
        set_phy_vars(params, vars);

        PMD_DRV_LOG(DEBUG, "Num of phys on board: %d", params->num_phys);
#ifdef ELINK_INCLUDE_FPGA
        if (CHIP_REV_IS_FPGA(sc)) {
                return elink_init_fpga(params, vars);
        } else
#endif
#ifdef ELINK_INCLUDE_EMUL
        if (CHIP_REV_IS_EMUL(sc)) {
                return elink_init_emul(params, vars);
        } else
#endif
                switch (params->loopback_mode) {
                case ELINK_LOOPBACK_BMAC:
                        elink_init_bmac_loopback(params, vars);
                        break;
                case ELINK_LOOPBACK_EMAC:
                        elink_init_emac_loopback(params, vars);
                        break;
                case ELINK_LOOPBACK_XMAC:
                        elink_init_xmac_loopback(params, vars);
                        break;
                case ELINK_LOOPBACK_UMAC:
                        elink_init_umac_loopback(params, vars);
                        break;
                case ELINK_LOOPBACK_XGXS:
                case ELINK_LOOPBACK_EXT_PHY:
                        elink_init_xgxs_loopback(params, vars);
                        break;
                default:
                        if (!CHIP_IS_E3(sc)) {
                                if (params->switch_cfg == ELINK_SWITCH_CFG_10G)
                                        elink_xgxs_deassert(params);
                                else
                                        elink_serdes_deassert(sc, params->port);
                        }
                        elink_link_initialize(params, vars);
                        DELAY(1000 * 30);
                        elink_link_int_enable(params);
                        break;
                }
        elink_update_mng(params, vars->link_status);

        elink_update_mng_eee(params, vars->eee_status);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_link_reset(struct elink_params *params,
                                       struct elink_vars *vars,
                                       uint8_t reset_ext_phy)
{
        struct bnx2x_softc *sc = params->sc;
        uint8_t phy_index, port = params->port, clear_latch_ind = 0;
        PMD_DRV_LOG(DEBUG, "Resetting the link of port %d", port);
        /* Disable attentions */
        vars->link_status = 0;
        elink_update_mng(params, vars->link_status);
        vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK |
                              SHMEM_EEE_ACTIVE_BIT);
        elink_update_mng_eee(params, vars->eee_status);
        elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4,
                       (ELINK_NIG_MASK_XGXS0_LINK_STATUS |
                        ELINK_NIG_MASK_XGXS0_LINK10G |
                        ELINK_NIG_MASK_SERDES0_LINK_STATUS |
                        ELINK_NIG_MASK_MI_INT));

        /* Activate nig drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 1);

        /* Disable nig egress interface */
        if (!CHIP_IS_E3(sc)) {
                REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0);
                REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0);
        }
#ifdef ELINK_INCLUDE_EMUL
        /* Stop BigMac rx */
        if (!(params->feature_config_flags &
              ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC))
#endif
                if (!CHIP_IS_E3(sc))
                        elink_set_bmac_rx(sc, port, 0);
#ifdef ELINK_INCLUDE_EMUL
        /* Stop XMAC/UMAC rx */
        if (!(params->feature_config_flags &
              ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC))
#endif
                if (CHIP_IS_E3(sc) && !CHIP_REV_IS_FPGA(sc)) {
                        elink_set_xmac_rxtx(params, 0);
                        elink_set_umac_rxtx(params, 0);
                }
        /* Disable emac */
        if (!CHIP_IS_E3(sc))
                REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0);

        DELAY(1000 * 10);
        /* The PHY reset is controlled by GPIO 1
         * Hold it as vars low
         */
        /* Clear link led */
        elink_set_mdio_emac_per_phy(sc, params);
        elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0);

        if (reset_ext_phy && (!CHIP_REV_IS_SLOW(sc))) {
                for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys;
                     phy_index++) {
                        if (params->phy[phy_index].link_reset) {
                                elink_set_aer_mmd(params,
                                                  &params->phy[phy_index]);
                                params->phy[phy_index].link_reset(&params->
                                                                  phy
                                                                  [phy_index],
                                                                  params);
                        }
                        if (params->phy[phy_index].flags &
                            ELINK_FLAGS_REARM_LATCH_SIGNAL)
                                clear_latch_ind = 1;
                }
        }

        if (clear_latch_ind) {
                /* Clear latching indication */
                elink_rearm_latch_signal(sc, port, 0);
                elink_bits_dis(sc, NIG_REG_LATCH_BC_0 + port * 4,
                               1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT);
        }
#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
        if (!CHIP_REV_IS_SLOW(sc))
#endif
                if (params->phy[ELINK_INT_PHY].link_reset)
                        params->phy[ELINK_INT_PHY].link_reset(&params->
                                                              phy
                                                              [ELINK_INT_PHY],
                                                              params);

        /* Disable nig ingress interface */
        if (!CHIP_IS_E3(sc)) {
                /* Reset BigMac */
                REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
                REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0);
                REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0);
        } else {
                uint32_t xmac_base =
                    (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
                elink_set_xumac_nig(params, 0, 0);
                if (REG_RD(sc, MISC_REG_RESET_REG_2) &
                    MISC_REGISTERS_RESET_REG_2_XMAC)
                        REG_WR(sc, xmac_base + XMAC_REG_CTRL,
                               XMAC_CTRL_REG_SOFT_RESET);
        }
        vars->link_up = 0;
        vars->phy_flags = 0;
        return ELINK_STATUS_OK;
}

elink_status_t elink_lfa_reset(struct elink_params * params,
                               struct elink_vars * vars)
{
        struct bnx2x_softc *sc = params->sc;
        vars->link_up = 0;
        vars->phy_flags = 0;
        params->link_flags &= ~ELINK_PHY_INITIALIZED;
        if (!params->lfa_base)
                return elink_link_reset(params, vars, 1);
        /*
         * Activate NIG drain so that during this time the device won't send
         * anything while it is unable to response.
         */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 1);

        /*
         * Close gracefully the gate from BMAC to NIG such that no half packets
         * are passed.
         */
        if (!CHIP_IS_E3(sc))
                elink_set_bmac_rx(sc, params->port, 0);

        if (CHIP_IS_E3(sc)) {
                elink_set_xmac_rxtx(params, 0);
                elink_set_umac_rxtx(params, 0);
        }
        /* Wait 10ms for the pipe to clean up */
        DELAY(1000 * 10);

        /* Clean the NIG-BRB using the network filters in a way that will
         * not cut a packet in the middle.
         */
        elink_set_rx_filter(params, 0);

        /*
         * Re-open the gate between the BMAC and the NIG, after verifying the
         * gate to the BRB is closed, otherwise packets may arrive to the
         * firmware before driver had initialized it. The target is to achieve
         * minimum management protocol down time.
         */
        if (!CHIP_IS_E3(sc))
                elink_set_bmac_rx(sc, params->port, 1);

        if (CHIP_IS_E3(sc)) {
                elink_set_xmac_rxtx(params, 1);
                elink_set_umac_rxtx(params, 1);
        }
        /* Disable NIG drain */
        REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
        return ELINK_STATUS_OK;
}

/****************************************************************************/
/*                              Common function                             */
/****************************************************************************/
static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
                                                 uint32_t shmem_base_path[],
                                                 uint32_t shmem2_base_path[],
                                                 uint8_t phy_index,
                                                 __rte_unused uint32_t chip_id)
{
        struct elink_phy phy[PORT_MAX];
        struct elink_phy *phy_blk[PORT_MAX];
        uint16_t val;
        int8_t port = 0;
        int8_t port_of_path = 0;
        uint32_t swap_val, swap_override;
        swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
        swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
        port ^= (swap_val && swap_override);
        elink_ext_phy_hw_reset(sc, port);
        /* PART1 - Reset both phys */
        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
                uint32_t shmem_base, shmem2_base;
                /* In E2, same phy is using for port0 of the two paths */
                if (CHIP_IS_E1x(sc)) {
                        shmem_base = shmem_base_path[0];
                        shmem2_base = shmem2_base_path[0];
                        port_of_path = port;
                } else {
                        shmem_base = shmem_base_path[port];
                        shmem2_base = shmem2_base_path[port];
                        port_of_path = 0;
                }

                /* Extract the ext phy address for the port */
                if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
                                       port_of_path, &phy[port]) !=
                    ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "populate_phy failed");
                        return ELINK_STATUS_ERROR;
                }
                /* Disable attentions */
                elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 +
                               port_of_path * 4,
                               (ELINK_NIG_MASK_XGXS0_LINK_STATUS |
                                ELINK_NIG_MASK_XGXS0_LINK10G |
                                ELINK_NIG_MASK_SERDES0_LINK_STATUS |
                                ELINK_NIG_MASK_MI_INT));

                /* Need to take the phy out of low power mode in order
                 * to write to access its registers
                 */
                elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                                    MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);

                /* Reset the phy */
                elink_cl45_write(sc, &phy[port],
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
        }

        /* Add delay of 150ms after reset */
        DELAY(1000 * 150);

        if (phy[PORT_0].addr & 0x1) {
                phy_blk[PORT_0] = &(phy[PORT_1]);
                phy_blk[PORT_1] = &(phy[PORT_0]);
        } else {
                phy_blk[PORT_0] = &(phy[PORT_0]);
                phy_blk[PORT_1] = &(phy[PORT_1]);
        }

        /* PART2 - Download firmware to both phys */
        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
                if (CHIP_IS_E1x(sc))
                        port_of_path = port;
                else
                        port_of_path = 0;

                PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x",
                            phy_blk[port]->addr);
                if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
                                                      port_of_path))
                        return ELINK_STATUS_ERROR;

                /* Only set bit 10 = 1 (Tx power down) */
                elink_cl45_read(sc, phy_blk[port],
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_TX_POWER_DOWN, &val);

                /* Phase1 of TX_POWER_DOWN reset */
                elink_cl45_write(sc, phy_blk[port],
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_TX_POWER_DOWN, (val | 1 << 10));
        }

        /* Toggle Transmitter: Power down and then up with 600ms delay
         * between
         */
        DELAY(1000 * 600);

        /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
                /* Phase2 of POWER_DOWN_RESET */
                /* Release bit 10 (Release Tx power down) */
                elink_cl45_read(sc, phy_blk[port],
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_TX_POWER_DOWN, &val);

                elink_cl45_write(sc, phy_blk[port],
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_TX_POWER_DOWN,
                                 (val & (~(1 << 10))));
                DELAY(1000 * 15);

                /* Read modify write the SPI-ROM version select register */
                elink_cl45_read(sc, phy_blk[port],
                                MDIO_PMA_DEVAD,
                                MDIO_PMA_REG_EDC_FFE_MAIN, &val);
                elink_cl45_write(sc, phy_blk[port],
                                 MDIO_PMA_DEVAD,
                                 MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1 << 12)));

                /* set GPIO2 back to LOW */
                elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
                                    MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
        }
        return ELINK_STATUS_OK;
}

static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc,
                                                 uint32_t shmem_base_path[],
                                                 uint32_t shmem2_base_path[],
                                                 uint8_t phy_index,
                                                 __rte_unused uint32_t chip_id)
{
        uint32_t val;
        int8_t port;
        struct elink_phy phy;
        /* Use port1 because of the static port-swap */
        /* Enable the module detection interrupt */
        val = REG_RD(sc, MISC_REG_GPIO_EVENT_EN);
        val |= ((1 << MISC_REGISTERS_GPIO_3) |
                (1 <<
                 (MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
        REG_WR(sc, MISC_REG_GPIO_EVENT_EN, val);

        elink_ext_phy_hw_reset(sc, 0);
        DELAY(1000 * 5);
        for (port = 0; port < PORT_MAX; port++) {
                uint32_t shmem_base, shmem2_base;

                /* In E2, same phy is using for port0 of the two paths */
                if (CHIP_IS_E1x(sc)) {
                        shmem_base = shmem_base_path[0];
                        shmem2_base = shmem2_base_path[0];
                } else {
                        shmem_base = shmem_base_path[port];
                        shmem2_base = shmem2_base_path[port];
                }
                /* Extract the ext phy address for the port */
                if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
                                       port, &phy) != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "populate phy failed");
                        return ELINK_STATUS_ERROR;
                }

                /* Reset phy */
                elink_cl45_write(sc, &phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);

                /* Set fault module detected LED on */
                elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_0,
                                    MISC_REGISTERS_GPIO_HIGH, port);
        }

        return ELINK_STATUS_OK;
}

static void elink_get_ext_phy_reset_gpio(struct bnx2x_softc *sc,
                                         uint32_t shmem_base, uint8_t * io_gpio,
                                         uint8_t * io_port)
{

        uint32_t phy_gpio_reset = REG_RD(sc, shmem_base +
                                         offsetof(struct shmem_region,
                                                  dev_info.
                                                  port_hw_config[PORT_0].
                                                  default_cfg));
        switch (phy_gpio_reset) {
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0:
                *io_gpio = 0;
                *io_port = 0;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0:
                *io_gpio = 1;
                *io_port = 0;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0:
                *io_gpio = 2;
                *io_port = 0;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0:
                *io_gpio = 3;
                *io_port = 0;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1:
                *io_gpio = 0;
                *io_port = 1;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1:
                *io_gpio = 1;
                *io_port = 1;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1:
                *io_gpio = 2;
                *io_port = 1;
                break;
        case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1:
                *io_gpio = 3;
                *io_port = 1;
                break;
        default:
                /* Don't override the io_gpio and io_port */
                break;
        }
}

static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
                                                 uint32_t shmem_base_path[],
                                                 uint32_t shmem2_base_path[],
                                                 uint8_t phy_index,
                                                 __rte_unused uint32_t chip_id)
{
        int8_t port, reset_gpio;
        uint32_t swap_val, swap_override;
        struct elink_phy phy[PORT_MAX];
        struct elink_phy *phy_blk[PORT_MAX];
        int8_t port_of_path;
        swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
        swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);

        reset_gpio = MISC_REGISTERS_GPIO_1;
        port = 1;

        /* Retrieve the reset gpio/port which control the reset.
         * Default is GPIO1, PORT1
         */
        elink_get_ext_phy_reset_gpio(sc, shmem_base_path[0],
                                     (uint8_t *) & reset_gpio,
                                     (uint8_t *) & port);

        /* Calculate the port based on port swap */
        port ^= (swap_val && swap_override);

        /* Initiate PHY reset */
        elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW,
                            port);
        DELAY(1000 * 1);
        elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH,
                            port);

        DELAY(1000 * 5);

        /* PART1 - Reset both phys */
        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
                uint32_t shmem_base, shmem2_base;

                /* In E2, same phy is using for port0 of the two paths */
                if (CHIP_IS_E1x(sc)) {
                        shmem_base = shmem_base_path[0];
                        shmem2_base = shmem2_base_path[0];
                        port_of_path = port;
                } else {
                        shmem_base = shmem_base_path[port];
                        shmem2_base = shmem2_base_path[port];
                        port_of_path = 0;
                }

                /* Extract the ext phy address for the port */
                if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
                                       port_of_path, &phy[port]) !=
                    ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "populate phy failed");
                        return ELINK_STATUS_ERROR;
                }
                /* disable attentions */
                elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 +
                               port_of_path * 4,
                               (ELINK_NIG_MASK_XGXS0_LINK_STATUS |
                                ELINK_NIG_MASK_XGXS0_LINK10G |
                                ELINK_NIG_MASK_SERDES0_LINK_STATUS |
                                ELINK_NIG_MASK_MI_INT));

                /* Reset the phy */
                elink_cl45_write(sc, &phy[port],
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
        }

        /* Add delay of 150ms after reset */
        DELAY(1000 * 150);
        if (phy[PORT_0].addr & 0x1) {
                phy_blk[PORT_0] = &(phy[PORT_1]);
                phy_blk[PORT_1] = &(phy[PORT_0]);
        } else {
                phy_blk[PORT_0] = &(phy[PORT_0]);
                phy_blk[PORT_1] = &(phy[PORT_1]);
        }
        /* PART2 - Download firmware to both phys */
        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
                if (CHIP_IS_E1x(sc))
                        port_of_path = port;
                else
                        port_of_path = 0;
                PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x",
                            phy_blk[port]->addr);
                if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
                                                      port_of_path))
                        return ELINK_STATUS_ERROR;
                /* Disable PHY transmitter output */
                elink_cl45_write(sc, phy_blk[port],
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, 1);

        }
        return ELINK_STATUS_OK;
}

static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc,
                                                  uint32_t shmem_base_path[],
                                                  __rte_unused uint32_t
                                                  shmem2_base_path[],
                                                  __rte_unused uint8_t
                                                  phy_index, uint32_t chip_id)
{
        uint8_t reset_gpios;
        reset_gpios = elink_84833_get_reset_gpios(sc, shmem_base_path, chip_id);
        elink_cb_gpio_mult_write(sc, reset_gpios,
                                 MISC_REGISTERS_GPIO_OUTPUT_LOW);
        DELAY(10);
        elink_cb_gpio_mult_write(sc, reset_gpios,
                                 MISC_REGISTERS_GPIO_OUTPUT_HIGH);
        PMD_DRV_LOG(DEBUG, "84833 reset pulse on pin values 0x%x", reset_gpios);
        return ELINK_STATUS_OK;
}

static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc,
                                                uint32_t shmem_base_path[],
                                                uint32_t shmem2_base_path[],
                                                uint8_t phy_index,
                                                uint32_t ext_phy_type,
                                                uint32_t chip_id)
{
        elink_status_t rc = ELINK_STATUS_OK;

        switch (ext_phy_type) {
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073:
                rc = elink_8073_common_init_phy(sc, shmem_base_path,
                                                shmem2_base_path,
                                                phy_index, chip_id);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727_NOC:
                rc = elink_8727_common_init_phy(sc, shmem_base_path,
                                                shmem2_base_path,
                                                phy_index, chip_id);
                break;

        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726:
                /* GPIO1 affects both ports, so there's need to pull
                 * it for single port alone
                 */
                rc = elink_8726_common_init_phy(sc, shmem_base_path,
                                                shmem2_base_path,
                                                phy_index, chip_id);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833:
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834:
                /* GPIO3's are linked, and so both need to be toggled
                 * to obtain required 2us pulse.
                 */
                rc = elink_84833_common_init_phy(sc, shmem_base_path,
                                                 shmem2_base_path,
                                                 phy_index, chip_id);
                break;
        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
                rc = ELINK_STATUS_ERROR;
                break;
        default:
                PMD_DRV_LOG(DEBUG,
                            "ext_phy 0x%x common init not required",
                            ext_phy_type);
                break;
        }

        if (rc != ELINK_STATUS_OK)
                elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, 0);      // "Warning: PHY was not initialized,"
        // " Port %d",

        return rc;
}

elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
                                     uint32_t shmem_base_path[],
                                     uint32_t shmem2_base_path[],
                                     uint32_t chip_id,
                                     __rte_unused uint8_t one_port_enabled)
{
        elink_status_t rc = ELINK_STATUS_OK;
        uint32_t phy_ver, val;
        uint8_t phy_index = 0;
        uint32_t ext_phy_type, ext_phy_config;
#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA)
        if (CHIP_REV_IS_EMUL(sc) || CHIP_REV_IS_FPGA(sc))
                return ELINK_STATUS_OK;
#endif

        elink_set_mdio_clk(sc, GRCBASE_EMAC0);
        elink_set_mdio_clk(sc, GRCBASE_EMAC1);
        PMD_DRV_LOG(DEBUG, "Begin common phy init");
        if (CHIP_IS_E3(sc)) {
                /* Enable EPIO */
                val = REG_RD(sc, MISC_REG_GEN_PURP_HWG);
                REG_WR(sc, MISC_REG_GEN_PURP_HWG, val | 1);
        }
        /* Check if common init was already done */
        phy_ver = REG_RD(sc, shmem_base_path[0] +
                         offsetof(struct shmem_region,
                                  port_mb[PORT_0].ext_phy_fw_version));
        if (phy_ver) {
                PMD_DRV_LOG(DEBUG, "Not doing common init; phy ver is 0x%x",
                            phy_ver);
                return ELINK_STATUS_OK;
        }

        /* Read the ext_phy_type for arbitrary port(0) */
        for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
             phy_index++) {
                ext_phy_config = elink_get_ext_phy_config(sc,
                                                          shmem_base_path[0],
                                                          phy_index, 0);
                ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(ext_phy_config);
                rc |= elink_ext_phy_common_init(sc, shmem_base_path,
                                                shmem2_base_path,
                                                phy_index, ext_phy_type,
                                                chip_id);
        }
        return rc;
}

static void elink_check_over_curr(struct elink_params *params,
                                  struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t cfg_pin;
        uint8_t port = params->port;
        uint32_t pin_val;

        cfg_pin = (REG_RD(sc, params->shmem_base +
                          offsetof(struct shmem_region,
                                   dev_info.port_hw_config[port].
                                   e3_cmn_pin_cfg1)) &
                   PORT_HW_CFG_E3_OVER_CURRENT_MASK) >>
            PORT_HW_CFG_E3_OVER_CURRENT_SHIFT;

        /* Ignore check if no external input PIN available */
        if (elink_get_cfg_pin(sc, cfg_pin, &pin_val) != ELINK_STATUS_OK)
                return;

        if (!pin_val) {
                if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) {
                        elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, params->port);        //"Error:  Power fault on Port %d has"
                        //  " been detected and the power to "
                        //  "that SFP+ module has been removed"
                        //  " to prevent failure of the card."
                        //  " Please remove the SFP+ module and"
                        //  " restart the system to clear this"
                        //  " error.",
                        vars->phy_flags |= PHY_OVER_CURRENT_FLAG;
                        elink_warpcore_power_module(params, 0);
                }
        } else
                vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG;
}

/* Returns 0 if no change occured since last check; 1 otherwise. */
static uint8_t elink_analyze_link_error(struct elink_params *params,
                                        struct elink_vars *vars,
                                        uint32_t status, uint32_t phy_flag,
                                        uint32_t link_flag, uint8_t notify)
{
        struct bnx2x_softc *sc = params->sc;
        /* Compare new value with previous value */
        uint8_t led_mode;
        uint32_t old_status = (vars->phy_flags & phy_flag) ? 1 : 0;

        if ((status ^ old_status) == 0)
                return 0;

        /* If values differ */
        switch (phy_flag) {
        case PHY_HALF_OPEN_CONN_FLAG:
                PMD_DRV_LOG(DEBUG, "Analyze Remote Fault");
                break;
        case PHY_SFP_TX_FAULT_FLAG:
                PMD_DRV_LOG(DEBUG, "Analyze TX Fault");
                break;
        default:
                PMD_DRV_LOG(DEBUG, "Analyze UNKNOWN");
        }
        PMD_DRV_LOG(DEBUG, "Link changed:[%x %x]->%x", vars->link_up,
                    old_status, status);

        /* a. Update shmem->link_status accordingly
         * b. Update elink_vars->link_up
         */
        if (status) {
                vars->link_status &= ~LINK_STATUS_LINK_UP;
                vars->link_status |= link_flag;
                vars->link_up = 0;
                vars->phy_flags |= phy_flag;

                /* activate nig drain */
                REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 1);
                /* Set LED mode to off since the PHY doesn't know about these
                 * errors
                 */
                led_mode = ELINK_LED_MODE_OFF;
        } else {
                vars->link_status |= LINK_STATUS_LINK_UP;
                vars->link_status &= ~link_flag;
                vars->link_up = 1;
                vars->phy_flags &= ~phy_flag;
                led_mode = ELINK_LED_MODE_OPER;

                /* Clear nig drain */
                REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0);
        }
        elink_sync_link(params, vars);
        /* Update the LED according to the link state */
        elink_set_led(params, vars, led_mode, ELINK_SPEED_10000);

        /* Update link status in the shared memory */
        elink_update_mng(params, vars->link_status);

        /* C. Trigger General Attention */
        vars->periodic_flags |= ELINK_PERIODIC_FLAGS_LINK_EVENT;
        if (notify)
                elink_cb_notify_link_changed(sc);

        return 1;
}

/******************************************************************************
* Description:
*       This function checks for half opened connection change indication.
*       When such change occurs, it calls the elink_analyze_link_error
*       to check if Remote Fault is set or cleared. Reception of remote fault
*       status message in the MAC indicates that the peer's MAC has detected
*       a fault, for example, due to break in the TX side of fiber.
*
******************************************************************************/
static elink_status_t elink_check_half_open_conn(struct elink_params *params,
                                                 struct elink_vars *vars,
                                                 uint8_t notify)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t lss_status = 0;
        uint32_t mac_base;
        /* In case link status is physically up @ 10G do */
        if (((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) ||
            (REG_RD(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4)))
                return ELINK_STATUS_OK;

        if (CHIP_IS_E3(sc) &&
            (REG_RD(sc, MISC_REG_RESET_REG_2) &
             (MISC_REGISTERS_RESET_REG_2_XMAC))) {
                /* Check E3 XMAC */
                /* Note that link speed cannot be queried here, since it may be
                 * zero while link is down. In case UMAC is active, LSS will
                 * simply not be set
                 */
                mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;

                /* Clear stick bits (Requires rising edge) */
                REG_WR(sc, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
                REG_WR(sc, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
                       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
                       XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
                if (REG_RD(sc, mac_base + XMAC_REG_RX_LSS_STATUS))
                        lss_status = 1;

                elink_analyze_link_error(params, vars, lss_status,
                                         PHY_HALF_OPEN_CONN_FLAG,
                                         LINK_STATUS_NONE, notify);
        } else if (REG_RD(sc, MISC_REG_RESET_REG_2) &
                   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
                /* Check E1X / E2 BMAC */
                uint32_t lss_status_reg;
                uint32_t wb_data[2];
                mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
                    NIG_REG_INGRESS_BMAC0_MEM;
                /*  Read BIGMAC_REGISTER_RX_LSS_STATUS */
                if (CHIP_IS_E2(sc))
                        lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT;
                else
                        lss_status_reg = BIGMAC_REGISTER_RX_LSS_STATUS;

                REG_RD_DMAE(sc, mac_base + lss_status_reg, wb_data, 2);
                lss_status = (wb_data[0] > 0);

                elink_analyze_link_error(params, vars, lss_status,
                                         PHY_HALF_OPEN_CONN_FLAG,
                                         LINK_STATUS_NONE, notify);
        }
        return ELINK_STATUS_OK;
}

static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
                                         struct elink_params *params,
                                         struct elink_vars *vars)
{
        struct bnx2x_softc *sc = params->sc;
        uint32_t cfg_pin, value = 0;
        uint8_t led_change, port = params->port;

        /* Get The SFP+ TX_Fault controlling pin ([eg]pio) */
        cfg_pin = (REG_RD(sc, params->shmem_base + offsetof(struct shmem_region,
                                                            dev_info.
                                                            port_hw_config
                                                            [port].
                                                            e3_cmn_pin_cfg)) &
                   PORT_HW_CFG_E3_TX_FAULT_MASK) >>
            PORT_HW_CFG_E3_TX_FAULT_SHIFT;

        if (elink_get_cfg_pin(sc, cfg_pin, &value)) {
                PMD_DRV_LOG(DEBUG, "Failed to read pin 0x%02x", cfg_pin);
                return;
        }

        led_change = elink_analyze_link_error(params, vars, value,
                                              PHY_SFP_TX_FAULT_FLAG,
                                              LINK_STATUS_SFP_TX_FAULT, 1);

        if (led_change) {
                /* Change TX_Fault led, set link status for further syncs */
                uint8_t led_mode;

                if (vars->phy_flags & PHY_SFP_TX_FAULT_FLAG) {
                        led_mode = MISC_REGISTERS_GPIO_HIGH;
                        vars->link_status |= LINK_STATUS_SFP_TX_FAULT;
                } else {
                        led_mode = MISC_REGISTERS_GPIO_LOW;
                        vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT;
                }

                /* If module is unapproved, led should be on regardless */
                if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
                        PMD_DRV_LOG(DEBUG, "Change TX_Fault LED: ->%x",
                                    led_mode);
                        elink_set_e3_module_fault_led(params, led_mode);
                }
        }
}

static void elink_kr2_recovery(struct elink_params *params,
                               struct elink_vars *vars, struct elink_phy *phy)
{
        PMD_DRV_LOG(DEBUG, "KR2 recovery");

        elink_warpcore_enable_AN_KR2(phy, params, vars);
        elink_warpcore_restart_AN_KR(phy, params);
}

static void elink_check_kr2_wa(struct elink_params *params,
                               struct elink_vars *vars, struct elink_phy *phy)
{
        struct bnx2x_softc *sc = params->sc;
        uint16_t base_page, next_page, not_kr2_device, lane;
        int sigdet;

        /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
         * Since some switches tend to reinit the AN process and clear the
         * the advertised BP/NP after ~2 seconds causing the KR2 to be disabled
         * and recovered many times
         */
        if (vars->check_kr2_recovery_cnt > 0) {
                vars->check_kr2_recovery_cnt--;
                return;
        }

        sigdet = elink_warpcore_get_sigdet(phy, params);
        if (!sigdet) {
                if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
                        elink_kr2_recovery(params, vars, phy);
                        PMD_DRV_LOG(DEBUG, "No sigdet");
                }
                return;
        }

        lane = elink_get_warpcore_lane(params);
        CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK,
                          MDIO_AER_BLOCK_AER_REG, lane);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                        MDIO_AN_REG_LP_AUTO_NEG, &base_page);
        elink_cl45_read(sc, phy, MDIO_AN_DEVAD,
                        MDIO_AN_REG_LP_AUTO_NEG2, &next_page);
        elink_set_aer_mmd(params, phy);

        /* CL73 has not begun yet */
        if (base_page == 0) {
                if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
                        elink_kr2_recovery(params, vars, phy);
                        PMD_DRV_LOG(DEBUG, "No BP");
                }
                return;
        }

        /* In case NP bit is not set in the BasePage, or it is set,
         * but only KX is advertised, declare this link partner as non-KR2
         * device.
         */
        not_kr2_device = (((base_page & 0x8000) == 0) ||
                          (((base_page & 0x8000) &&
                            ((next_page & 0xe0) == 0x2))));

        /* In case KR2 is already disabled, check if we need to re-enable it */
        if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
                if (!not_kr2_device) {
                        PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page,
                                    next_page);
                        elink_kr2_recovery(params, vars, phy);
                }
                return;
        }
        /* KR2 is enabled, but not KR2 device */
        if (not_kr2_device) {
                /* Disable KR2 on both lanes */
                PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, next_page);
                elink_disable_kr2(params, vars, phy);
                /* Restart AN on leading lane */
                elink_warpcore_restart_AN_KR(phy, params);
                return;
        }
}

void elink_period_func(struct elink_params *params, struct elink_vars *vars)
{
        uint16_t phy_idx;
        struct bnx2x_softc *sc = params->sc;
        for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
                if (params->phy[phy_idx].flags & ELINK_FLAGS_TX_ERROR_CHECK) {
                        elink_set_aer_mmd(params, &params->phy[phy_idx]);
                        if (elink_check_half_open_conn(params, vars, 1) !=
                            ELINK_STATUS_OK) {
                                PMD_DRV_LOG(DEBUG, "Fault detection failed");
                        }
                        break;
                }
        }

        if (CHIP_IS_E3(sc)) {
                struct elink_phy *phy = &params->phy[ELINK_INT_PHY];
                elink_set_aer_mmd(params, phy);
                if ((phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) &&
                    (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
                        elink_check_kr2_wa(params, vars, phy);
                elink_check_over_curr(params, vars);
                if (vars->rx_tx_asic_rst)
                        elink_warpcore_config_runtime(phy, params, vars);

                if ((REG_RD(sc, params->shmem_base +
                            offsetof(struct shmem_region,
                                     dev_info.port_hw_config[params->port].
                                     default_cfg))
                     & PORT_HW_CFG_NET_SERDES_IF_MASK) ==
                    PORT_HW_CFG_NET_SERDES_IF_SFI) {
                        if (elink_is_sfp_module_plugged(params)) {
                                elink_sfp_tx_fault_detection(phy, params, vars);
                        } else if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) {
                                /* Clean trail, interrupt corrects the leds */
                                vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT;
                                vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG;
                                /* Update link status in the shared memory */
                                elink_update_mng(params, vars->link_status);
                        }
                }
        }
}

uint8_t elink_fan_failure_det_req(struct bnx2x_softc *sc,
                                  uint32_t shmem_base,
                                  uint32_t shmem2_base, uint8_t port)
{
        uint8_t phy_index, fan_failure_det_req = 0;
        struct elink_phy phy;
        for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
             phy_index++) {
                if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
                                       port, &phy)
                    != ELINK_STATUS_OK) {
                        PMD_DRV_LOG(DEBUG, "populate phy failed");
                        return 0;
                }
                fan_failure_det_req |= (phy.flags &
                                        ELINK_FLAGS_FAN_FAILURE_DET_REQ);
        }
        return fan_failure_det_req;
}

void elink_hw_reset_phy(struct elink_params *params)
{
        uint8_t phy_index;
        struct bnx2x_softc *sc = params->sc;
        elink_update_mng(params, 0);
        elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + params->port * 4,
                       (ELINK_NIG_MASK_XGXS0_LINK_STATUS |
                        ELINK_NIG_MASK_XGXS0_LINK10G |
                        ELINK_NIG_MASK_SERDES0_LINK_STATUS |
                        ELINK_NIG_MASK_MI_INT));

        for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) {
                if (params->phy[phy_index].hw_reset) {
                        params->phy[phy_index].hw_reset(&params->phy[phy_index],
                                                        params);
                        params->phy[phy_index] = phy_null;
                }
        }
}

void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
                            __rte_unused uint32_t chip_id, uint32_t shmem_base,
                            uint32_t shmem2_base, uint8_t port)
{
        uint8_t gpio_num = 0xff, gpio_port = 0xff, phy_index;
        uint32_t val;
        uint32_t offset, aeu_mask, swap_val, swap_override, sync_offset;
        if (CHIP_IS_E3(sc)) {
                if (elink_get_mod_abs_int_cfg(sc,
                                              shmem_base,
                                              port,
                                              &gpio_num,
                                              &gpio_port) != ELINK_STATUS_OK)
                        return;
        } else {
                struct elink_phy phy;
                for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS;
                     phy_index++) {
                        if (elink_populate_phy(sc, phy_index, shmem_base,
                                               shmem2_base, port, &phy)
                            != ELINK_STATUS_OK) {
                                PMD_DRV_LOG(DEBUG, "populate phy failed");
                                return;
                        }
                        if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726) {
                                gpio_num = MISC_REGISTERS_GPIO_3;
                                gpio_port = port;
                                break;
                        }
                }
        }

        if (gpio_num == 0xff)
                return;

        /* Set GPIO3 to trigger SFP+ module insertion/removal */
        elink_cb_gpio_write(sc, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z,
                            gpio_port);

        swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
        swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
        gpio_port ^= (swap_val && swap_override);

        vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 <<
            (gpio_num + (gpio_port << 2));

        sync_offset = shmem_base +
            offsetof(struct shmem_region,
                     dev_info.port_hw_config[port].aeu_int_mask);
        REG_WR(sc, sync_offset, vars->aeu_int_mask);

        PMD_DRV_LOG(DEBUG, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x",
                    gpio_num, gpio_port, vars->aeu_int_mask);

        if (port == 0)
                offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
        else
                offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;

        /* Open appropriate AEU for interrupts */
        aeu_mask = REG_RD(sc, offset);
        aeu_mask |= vars->aeu_int_mask;
        REG_WR(sc, offset, aeu_mask);

        /* Enable the GPIO to trigger interrupt */
        val = REG_RD(sc, MISC_REG_GPIO_EVENT_EN);
        val |= 1 << (gpio_num + (gpio_port << 2));
        REG_WR(sc, MISC_REG_GPIO_EVENT_EN, val);
}