e7242057a5246083de9cfaffb9c53b29e31aada9
[dpdk.git] / drivers / net / e1000 / em_ethdev.c
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #include <sys/queue.h>
35 #include <stdio.h>
36 #include <errno.h>
37 #include <stdint.h>
38 #include <stdarg.h>
39
40 #include <rte_common.h>
41 #include <rte_interrupts.h>
42 #include <rte_byteorder.h>
43 #include <rte_log.h>
44 #include <rte_debug.h>
45 #include <rte_pci.h>
46 #include <rte_ether.h>
47 #include <rte_ethdev.h>
48 #include <rte_ethdev_pci.h>
49 #include <rte_memory.h>
50 #include <rte_memzone.h>
51 #include <rte_eal.h>
52 #include <rte_atomic.h>
53 #include <rte_malloc.h>
54 #include <rte_dev.h>
55
56 #include "e1000_logs.h"
57 #include "base/e1000_api.h"
58 #include "e1000_ethdev.h"
59
60 #define EM_EIAC                 0x000DC
61
62 #define PMD_ROUNDUP(x,y)        (((x) + (y) - 1)/(y) * (y))
63
64
65 static int eth_em_configure(struct rte_eth_dev *dev);
66 static int eth_em_start(struct rte_eth_dev *dev);
67 static void eth_em_stop(struct rte_eth_dev *dev);
68 static void eth_em_close(struct rte_eth_dev *dev);
69 static void eth_em_promiscuous_enable(struct rte_eth_dev *dev);
70 static void eth_em_promiscuous_disable(struct rte_eth_dev *dev);
71 static void eth_em_allmulticast_enable(struct rte_eth_dev *dev);
72 static void eth_em_allmulticast_disable(struct rte_eth_dev *dev);
73 static int eth_em_link_update(struct rte_eth_dev *dev,
74                                 int wait_to_complete);
75 static int eth_em_stats_get(struct rte_eth_dev *dev,
76                                 struct rte_eth_stats *rte_stats);
77 static void eth_em_stats_reset(struct rte_eth_dev *dev);
78 static void eth_em_infos_get(struct rte_eth_dev *dev,
79                                 struct rte_eth_dev_info *dev_info);
80 static int eth_em_flow_ctrl_get(struct rte_eth_dev *dev,
81                                 struct rte_eth_fc_conf *fc_conf);
82 static int eth_em_flow_ctrl_set(struct rte_eth_dev *dev,
83                                 struct rte_eth_fc_conf *fc_conf);
84 static int eth_em_interrupt_setup(struct rte_eth_dev *dev);
85 static int eth_em_rxq_interrupt_setup(struct rte_eth_dev *dev);
86 static int eth_em_interrupt_get_status(struct rte_eth_dev *dev);
87 static int eth_em_interrupt_action(struct rte_eth_dev *dev,
88                                    struct rte_intr_handle *handle);
89 static void eth_em_interrupt_handler(void *param);
90
91 static int em_hw_init(struct e1000_hw *hw);
92 static int em_hardware_init(struct e1000_hw *hw);
93 static void em_hw_control_acquire(struct e1000_hw *hw);
94 static void em_hw_control_release(struct e1000_hw *hw);
95 static void em_init_manageability(struct e1000_hw *hw);
96 static void em_release_manageability(struct e1000_hw *hw);
97
98 static int eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
99
100 static int eth_em_vlan_filter_set(struct rte_eth_dev *dev,
101                 uint16_t vlan_id, int on);
102 static void eth_em_vlan_offload_set(struct rte_eth_dev *dev, int mask);
103 static void em_vlan_hw_filter_enable(struct rte_eth_dev *dev);
104 static void em_vlan_hw_filter_disable(struct rte_eth_dev *dev);
105 static void em_vlan_hw_strip_enable(struct rte_eth_dev *dev);
106 static void em_vlan_hw_strip_disable(struct rte_eth_dev *dev);
107
108 /*
109 static void eth_em_vlan_filter_set(struct rte_eth_dev *dev,
110                                         uint16_t vlan_id, int on);
111 */
112
113 static int eth_em_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
114 static int eth_em_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
115 static void em_lsc_intr_disable(struct e1000_hw *hw);
116 static void em_rxq_intr_enable(struct e1000_hw *hw);
117 static void em_rxq_intr_disable(struct e1000_hw *hw);
118
119 static int eth_em_led_on(struct rte_eth_dev *dev);
120 static int eth_em_led_off(struct rte_eth_dev *dev);
121
122 static int em_get_rx_buffer_size(struct e1000_hw *hw);
123 static int eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
124                           uint32_t index, uint32_t pool);
125 static void eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index);
126
127 static int eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
128                                    struct ether_addr *mc_addr_set,
129                                    uint32_t nb_mc_addr);
130
131 #define EM_FC_PAUSE_TIME 0x0680
132 #define EM_LINK_UPDATE_CHECK_TIMEOUT  90  /* 9s */
133 #define EM_LINK_UPDATE_CHECK_INTERVAL 100 /* ms */
134
135 static enum e1000_fc_mode em_fc_setting = e1000_fc_full;
136
137 /*
138  * The set of PCI devices this driver supports
139  */
140 static const struct rte_pci_id pci_id_em_map[] = {
141         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82540EM) },
142         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_COPPER) },
143         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82545EM_FIBER) },
144         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_COPPER) },
145         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_FIBER) },
146         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82546EB_QUAD_COPPER) },
147         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_COPPER) },
148         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_FIBER) },
149         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES) },
150         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_DUAL) },
151         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_SERDES_QUAD) },
152         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER) },
153         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571PT_QUAD_COPPER) },
154         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_FIBER) },
155         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82571EB_QUAD_COPPER_LP) },
156         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_COPPER) },
157         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_FIBER) },
158         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI_SERDES) },
159         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82572EI) },
160         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82573L) },
161         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574L) },
162         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82574LA) },
163         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82583V) },
164         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_LM) },
165         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPT_I217_V) },
166         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_LM) },
167         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LPTLP_I218_V) },
168         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM2) },
169         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V2) },
170         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM3) },
171         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V3) },
172         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM) },
173         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V) },
174         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM2) },
175         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V2) },
176         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LBG_I219_LM3) },
177         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM4) },
178         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V4) },
179         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM5) },
180         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V5) },
181         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_LM6) },
182         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_V6) },
183         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_LM7) },
184         { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_V7) },
185         { .vendor_id = 0, /* sentinel */ },
186 };
187
188 static const struct eth_dev_ops eth_em_ops = {
189         .dev_configure        = eth_em_configure,
190         .dev_start            = eth_em_start,
191         .dev_stop             = eth_em_stop,
192         .dev_close            = eth_em_close,
193         .promiscuous_enable   = eth_em_promiscuous_enable,
194         .promiscuous_disable  = eth_em_promiscuous_disable,
195         .allmulticast_enable  = eth_em_allmulticast_enable,
196         .allmulticast_disable = eth_em_allmulticast_disable,
197         .link_update          = eth_em_link_update,
198         .stats_get            = eth_em_stats_get,
199         .stats_reset          = eth_em_stats_reset,
200         .dev_infos_get        = eth_em_infos_get,
201         .mtu_set              = eth_em_mtu_set,
202         .vlan_filter_set      = eth_em_vlan_filter_set,
203         .vlan_offload_set     = eth_em_vlan_offload_set,
204         .rx_queue_setup       = eth_em_rx_queue_setup,
205         .rx_queue_release     = eth_em_rx_queue_release,
206         .rx_queue_count       = eth_em_rx_queue_count,
207         .rx_descriptor_done   = eth_em_rx_descriptor_done,
208         .rx_descriptor_status = eth_em_rx_descriptor_status,
209         .tx_descriptor_status = eth_em_tx_descriptor_status,
210         .tx_queue_setup       = eth_em_tx_queue_setup,
211         .tx_queue_release     = eth_em_tx_queue_release,
212         .rx_queue_intr_enable = eth_em_rx_queue_intr_enable,
213         .rx_queue_intr_disable = eth_em_rx_queue_intr_disable,
214         .dev_led_on           = eth_em_led_on,
215         .dev_led_off          = eth_em_led_off,
216         .flow_ctrl_get        = eth_em_flow_ctrl_get,
217         .flow_ctrl_set        = eth_em_flow_ctrl_set,
218         .mac_addr_add         = eth_em_rar_set,
219         .mac_addr_remove      = eth_em_rar_clear,
220         .set_mc_addr_list     = eth_em_set_mc_addr_list,
221         .rxq_info_get         = em_rxq_info_get,
222         .txq_info_get         = em_txq_info_get,
223 };
224
225 /**
226  * Atomically reads the link status information from global
227  * structure rte_eth_dev.
228  *
229  * @param dev
230  *   - Pointer to the structure rte_eth_dev to read from.
231  *   - Pointer to the buffer to be saved with the link status.
232  *
233  * @return
234  *   - On success, zero.
235  *   - On failure, negative value.
236  */
237 static inline int
238 rte_em_dev_atomic_read_link_status(struct rte_eth_dev *dev,
239                                 struct rte_eth_link *link)
240 {
241         struct rte_eth_link *dst = link;
242         struct rte_eth_link *src = &(dev->data->dev_link);
243
244         if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
245                                         *(uint64_t *)src) == 0)
246                 return -1;
247
248         return 0;
249 }
250
251 /**
252  * Atomically writes the link status information into global
253  * structure rte_eth_dev.
254  *
255  * @param dev
256  *   - Pointer to the structure rte_eth_dev to read from.
257  *   - Pointer to the buffer to be saved with the link status.
258  *
259  * @return
260  *   - On success, zero.
261  *   - On failure, negative value.
262  */
263 static inline int
264 rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,
265                                 struct rte_eth_link *link)
266 {
267         struct rte_eth_link *dst = &(dev->data->dev_link);
268         struct rte_eth_link *src = link;
269
270         if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
271                                         *(uint64_t *)src) == 0)
272                 return -1;
273
274         return 0;
275 }
276
277 /**
278  *  eth_em_dev_is_ich8 - Check for ICH8 device
279  *  @hw: pointer to the HW structure
280  *
281  *  return TRUE for ICH8, otherwise FALSE
282  **/
283 static bool
284 eth_em_dev_is_ich8(struct e1000_hw *hw)
285 {
286         DEBUGFUNC("eth_em_dev_is_ich8");
287
288         switch (hw->device_id) {
289         case E1000_DEV_ID_PCH_LPT_I217_LM:
290         case E1000_DEV_ID_PCH_LPT_I217_V:
291         case E1000_DEV_ID_PCH_LPTLP_I218_LM:
292         case E1000_DEV_ID_PCH_LPTLP_I218_V:
293         case E1000_DEV_ID_PCH_I218_V2:
294         case E1000_DEV_ID_PCH_I218_LM2:
295         case E1000_DEV_ID_PCH_I218_V3:
296         case E1000_DEV_ID_PCH_I218_LM3:
297         case E1000_DEV_ID_PCH_SPT_I219_LM:
298         case E1000_DEV_ID_PCH_SPT_I219_V:
299         case E1000_DEV_ID_PCH_SPT_I219_LM2:
300         case E1000_DEV_ID_PCH_SPT_I219_V2:
301         case E1000_DEV_ID_PCH_LBG_I219_LM3:
302         case E1000_DEV_ID_PCH_SPT_I219_LM4:
303         case E1000_DEV_ID_PCH_SPT_I219_V4:
304         case E1000_DEV_ID_PCH_SPT_I219_LM5:
305         case E1000_DEV_ID_PCH_SPT_I219_V5:
306         case E1000_DEV_ID_PCH_CNP_I219_LM6:
307         case E1000_DEV_ID_PCH_CNP_I219_V6:
308         case E1000_DEV_ID_PCH_CNP_I219_LM7:
309         case E1000_DEV_ID_PCH_CNP_I219_V7:
310                 return 1;
311         default:
312                 return 0;
313         }
314 }
315
316 static int
317 eth_em_dev_init(struct rte_eth_dev *eth_dev)
318 {
319         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
320         struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
321         struct e1000_adapter *adapter =
322                 E1000_DEV_PRIVATE(eth_dev->data->dev_private);
323         struct e1000_hw *hw =
324                 E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
325         struct e1000_vfta * shadow_vfta =
326                 E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private);
327
328         eth_dev->dev_ops = &eth_em_ops;
329         eth_dev->rx_pkt_burst = (eth_rx_burst_t)&eth_em_recv_pkts;
330         eth_dev->tx_pkt_burst = (eth_tx_burst_t)&eth_em_xmit_pkts;
331         eth_dev->tx_pkt_prepare = (eth_tx_prep_t)&eth_em_prep_pkts;
332
333         /* for secondary processes, we don't initialise any further as primary
334          * has already done this work. Only check we don't need a different
335          * RX function */
336         if (rte_eal_process_type() != RTE_PROC_PRIMARY){
337                 if (eth_dev->data->scattered_rx)
338                         eth_dev->rx_pkt_burst =
339                                 (eth_rx_burst_t)&eth_em_recv_scattered_pkts;
340                 return 0;
341         }
342
343         rte_eth_copy_pci_info(eth_dev, pci_dev);
344         eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
345
346         hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
347         hw->device_id = pci_dev->id.device_id;
348         adapter->stopped = 0;
349
350         /* For ICH8 support we'll need to map the flash memory BAR */
351         if (eth_em_dev_is_ich8(hw))
352                 hw->flash_address = (void *)pci_dev->mem_resource[1].addr;
353
354         if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS ||
355                         em_hw_init(hw) != 0) {
356                 PMD_INIT_LOG(ERR, "port_id %d vendorID=0x%x deviceID=0x%x: "
357                         "failed to init HW",
358                         eth_dev->data->port_id, pci_dev->id.vendor_id,
359                         pci_dev->id.device_id);
360                 return -ENODEV;
361         }
362
363         /* Allocate memory for storing MAC addresses */
364         eth_dev->data->mac_addrs = rte_zmalloc("e1000", ETHER_ADDR_LEN *
365                         hw->mac.rar_entry_count, 0);
366         if (eth_dev->data->mac_addrs == NULL) {
367                 PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
368                         "store MAC addresses",
369                         ETHER_ADDR_LEN * hw->mac.rar_entry_count);
370                 return -ENOMEM;
371         }
372
373         /* Copy the permanent MAC address */
374         ether_addr_copy((struct ether_addr *) hw->mac.addr,
375                 eth_dev->data->mac_addrs);
376
377         /* initialize the vfta */
378         memset(shadow_vfta, 0, sizeof(*shadow_vfta));
379
380         PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
381                      eth_dev->data->port_id, pci_dev->id.vendor_id,
382                      pci_dev->id.device_id);
383
384         rte_intr_callback_register(intr_handle,
385                                    eth_em_interrupt_handler, eth_dev);
386
387         return 0;
388 }
389
390 static int
391 eth_em_dev_uninit(struct rte_eth_dev *eth_dev)
392 {
393         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
394         struct e1000_adapter *adapter =
395                 E1000_DEV_PRIVATE(eth_dev->data->dev_private);
396         struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
397
398         PMD_INIT_FUNC_TRACE();
399
400         if (rte_eal_process_type() != RTE_PROC_PRIMARY)
401                 return -EPERM;
402
403         if (adapter->stopped == 0)
404                 eth_em_close(eth_dev);
405
406         eth_dev->dev_ops = NULL;
407         eth_dev->rx_pkt_burst = NULL;
408         eth_dev->tx_pkt_burst = NULL;
409
410         rte_free(eth_dev->data->mac_addrs);
411         eth_dev->data->mac_addrs = NULL;
412
413         /* disable uio intr before callback unregister */
414         rte_intr_disable(intr_handle);
415         rte_intr_callback_unregister(intr_handle,
416                                      eth_em_interrupt_handler, eth_dev);
417
418         return 0;
419 }
420
421 static int eth_em_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
422         struct rte_pci_device *pci_dev)
423 {
424         return rte_eth_dev_pci_generic_probe(pci_dev,
425                 sizeof(struct e1000_adapter), eth_em_dev_init);
426 }
427
428 static int eth_em_pci_remove(struct rte_pci_device *pci_dev)
429 {
430         return rte_eth_dev_pci_generic_remove(pci_dev, eth_em_dev_uninit);
431 }
432
433 static struct rte_pci_driver rte_em_pmd = {
434         .id_table = pci_id_em_map,
435         .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
436         .probe = eth_em_pci_probe,
437         .remove = eth_em_pci_remove,
438 };
439
440 static int
441 em_hw_init(struct e1000_hw *hw)
442 {
443         int diag;
444
445         diag = hw->mac.ops.init_params(hw);
446         if (diag != 0) {
447                 PMD_INIT_LOG(ERR, "MAC Initialization Error");
448                 return diag;
449         }
450         diag = hw->nvm.ops.init_params(hw);
451         if (diag != 0) {
452                 PMD_INIT_LOG(ERR, "NVM Initialization Error");
453                 return diag;
454         }
455         diag = hw->phy.ops.init_params(hw);
456         if (diag != 0) {
457                 PMD_INIT_LOG(ERR, "PHY Initialization Error");
458                 return diag;
459         }
460         (void) e1000_get_bus_info(hw);
461
462         hw->mac.autoneg = 1;
463         hw->phy.autoneg_wait_to_complete = 0;
464         hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
465
466         e1000_init_script_state_82541(hw, TRUE);
467         e1000_set_tbi_compatibility_82543(hw, TRUE);
468
469         /* Copper options */
470         if (hw->phy.media_type == e1000_media_type_copper) {
471                 hw->phy.mdix = 0; /* AUTO_ALL_MODES */
472                 hw->phy.disable_polarity_correction = 0;
473                 hw->phy.ms_type = e1000_ms_hw_default;
474         }
475
476         /*
477          * Start from a known state, this is important in reading the nvm
478          * and mac from that.
479          */
480         e1000_reset_hw(hw);
481
482         /* Make sure we have a good EEPROM before we read from it */
483         if (e1000_validate_nvm_checksum(hw) < 0) {
484                 /*
485                  * Some PCI-E parts fail the first check due to
486                  * the link being in sleep state, call it again,
487                  * if it fails a second time its a real issue.
488                  */
489                 diag = e1000_validate_nvm_checksum(hw);
490                 if (diag < 0) {
491                         PMD_INIT_LOG(ERR, "EEPROM checksum invalid");
492                         goto error;
493                 }
494         }
495
496         /* Read the permanent MAC address out of the EEPROM */
497         diag = e1000_read_mac_addr(hw);
498         if (diag != 0) {
499                 PMD_INIT_LOG(ERR, "EEPROM error while reading MAC address");
500                 goto error;
501         }
502
503         /* Now initialize the hardware */
504         diag = em_hardware_init(hw);
505         if (diag != 0) {
506                 PMD_INIT_LOG(ERR, "Hardware initialization failed");
507                 goto error;
508         }
509
510         hw->mac.get_link_status = 1;
511
512         /* Indicate SOL/IDER usage */
513         diag = e1000_check_reset_block(hw);
514         if (diag < 0) {
515                 PMD_INIT_LOG(ERR, "PHY reset is blocked due to "
516                         "SOL/IDER session");
517         }
518         return 0;
519
520 error:
521         em_hw_control_release(hw);
522         return diag;
523 }
524
525 static int
526 eth_em_configure(struct rte_eth_dev *dev)
527 {
528         struct e1000_interrupt *intr =
529                 E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
530
531         PMD_INIT_FUNC_TRACE();
532         intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
533         PMD_INIT_FUNC_TRACE();
534
535         return 0;
536 }
537
538 static void
539 em_set_pba(struct e1000_hw *hw)
540 {
541         uint32_t pba;
542
543         /*
544          * Packet Buffer Allocation (PBA)
545          * Writing PBA sets the receive portion of the buffer
546          * the remainder is used for the transmit buffer.
547          * Devices before the 82547 had a Packet Buffer of 64K.
548          * After the 82547 the buffer was reduced to 40K.
549          */
550         switch (hw->mac.type) {
551                 case e1000_82547:
552                 case e1000_82547_rev_2:
553                 /* 82547: Total Packet Buffer is 40K */
554                         pba = E1000_PBA_22K; /* 22K for Rx, 18K for Tx */
555                         break;
556                 case e1000_82571:
557                 case e1000_82572:
558                 case e1000_80003es2lan:
559                         pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
560                         break;
561                 case e1000_82573: /* 82573: Total Packet Buffer is 32K */
562                         pba = E1000_PBA_12K; /* 12K for Rx, 20K for Tx */
563                         break;
564                 case e1000_82574:
565                 case e1000_82583:
566                         pba = E1000_PBA_20K; /* 20K for Rx, 20K for Tx */
567                         break;
568                 case e1000_ich8lan:
569                         pba = E1000_PBA_8K;
570                         break;
571                 case e1000_ich9lan:
572                 case e1000_ich10lan:
573                         pba = E1000_PBA_10K;
574                         break;
575                 case e1000_pchlan:
576                 case e1000_pch2lan:
577                 case e1000_pch_lpt:
578                 case e1000_pch_spt:
579                 case e1000_pch_cnp:
580                         pba = E1000_PBA_26K;
581                         break;
582                 default:
583                         pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */
584         }
585
586         E1000_WRITE_REG(hw, E1000_PBA, pba);
587 }
588
589 static int
590 eth_em_start(struct rte_eth_dev *dev)
591 {
592         struct e1000_adapter *adapter =
593                 E1000_DEV_PRIVATE(dev->data->dev_private);
594         struct e1000_hw *hw =
595                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
596         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
597         struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
598         int ret, mask;
599         uint32_t intr_vector = 0;
600         uint32_t *speeds;
601         int num_speeds;
602         bool autoneg;
603
604         PMD_INIT_FUNC_TRACE();
605
606         eth_em_stop(dev);
607
608         e1000_power_up_phy(hw);
609
610         /* Set default PBA value */
611         em_set_pba(hw);
612
613         /* Put the address into the Receive Address Array */
614         e1000_rar_set(hw, hw->mac.addr, 0);
615
616         /*
617          * With the 82571 adapter, RAR[0] may be overwritten
618          * when the other port is reset, we make a duplicate
619          * in RAR[14] for that eventuality, this assures
620          * the interface continues to function.
621          */
622         if (hw->mac.type == e1000_82571) {
623                 e1000_set_laa_state_82571(hw, TRUE);
624                 e1000_rar_set(hw, hw->mac.addr, E1000_RAR_ENTRIES - 1);
625         }
626
627         /* Initialize the hardware */
628         if (em_hardware_init(hw)) {
629                 PMD_INIT_LOG(ERR, "Unable to initialize the hardware");
630                 return -EIO;
631         }
632
633         E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
634
635         /* Configure for OS presence */
636         em_init_manageability(hw);
637
638         if (dev->data->dev_conf.intr_conf.rxq != 0) {
639                 intr_vector = dev->data->nb_rx_queues;
640                 if (rte_intr_efd_enable(intr_handle, intr_vector))
641                         return -1;
642         }
643
644         if (rte_intr_dp_is_en(intr_handle)) {
645                 intr_handle->intr_vec =
646                         rte_zmalloc("intr_vec",
647                                         dev->data->nb_rx_queues * sizeof(int), 0);
648                 if (intr_handle->intr_vec == NULL) {
649                         PMD_INIT_LOG(ERR, "Failed to allocate %d rx_queues"
650                                                 " intr_vec", dev->data->nb_rx_queues);
651                         return -ENOMEM;
652                 }
653
654                 /* enable rx interrupt */
655                 em_rxq_intr_enable(hw);
656         }
657
658         eth_em_tx_init(dev);
659
660         ret = eth_em_rx_init(dev);
661         if (ret) {
662                 PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
663                 em_dev_clear_queues(dev);
664                 return ret;
665         }
666
667         e1000_clear_hw_cntrs_base_generic(hw);
668
669         mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK | \
670                         ETH_VLAN_EXTEND_MASK;
671         eth_em_vlan_offload_set(dev, mask);
672
673         /* Set Interrupt Throttling Rate to maximum allowed value. */
674         E1000_WRITE_REG(hw, E1000_ITR, UINT16_MAX);
675
676         /* Setup link speed and duplex */
677         speeds = &dev->data->dev_conf.link_speeds;
678         if (*speeds == ETH_LINK_SPEED_AUTONEG) {
679                 hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
680                 hw->mac.autoneg = 1;
681         } else {
682                 num_speeds = 0;
683                 autoneg = (*speeds & ETH_LINK_SPEED_FIXED) == 0;
684
685                 /* Reset */
686                 hw->phy.autoneg_advertised = 0;
687
688                 if (*speeds & ~(ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
689                                 ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
690                                 ETH_LINK_SPEED_1G | ETH_LINK_SPEED_FIXED)) {
691                         num_speeds = -1;
692                         goto error_invalid_config;
693                 }
694                 if (*speeds & ETH_LINK_SPEED_10M_HD) {
695                         hw->phy.autoneg_advertised |= ADVERTISE_10_HALF;
696                         num_speeds++;
697                 }
698                 if (*speeds & ETH_LINK_SPEED_10M) {
699                         hw->phy.autoneg_advertised |= ADVERTISE_10_FULL;
700                         num_speeds++;
701                 }
702                 if (*speeds & ETH_LINK_SPEED_100M_HD) {
703                         hw->phy.autoneg_advertised |= ADVERTISE_100_HALF;
704                         num_speeds++;
705                 }
706                 if (*speeds & ETH_LINK_SPEED_100M) {
707                         hw->phy.autoneg_advertised |= ADVERTISE_100_FULL;
708                         num_speeds++;
709                 }
710                 if (*speeds & ETH_LINK_SPEED_1G) {
711                         hw->phy.autoneg_advertised |= ADVERTISE_1000_FULL;
712                         num_speeds++;
713                 }
714                 if (num_speeds == 0 || (!autoneg && (num_speeds > 1)))
715                         goto error_invalid_config;
716
717                 /* Set/reset the mac.autoneg based on the link speed,
718                  * fixed or not
719                  */
720                 if (!autoneg) {
721                         hw->mac.autoneg = 0;
722                         hw->mac.forced_speed_duplex =
723                                         hw->phy.autoneg_advertised;
724                 } else {
725                         hw->mac.autoneg = 1;
726                 }
727         }
728
729         e1000_setup_link(hw);
730
731         if (rte_intr_allow_others(intr_handle)) {
732                 /* check if lsc interrupt is enabled */
733                 if (dev->data->dev_conf.intr_conf.lsc != 0) {
734                         ret = eth_em_interrupt_setup(dev);
735                         if (ret) {
736                                 PMD_INIT_LOG(ERR, "Unable to setup interrupts");
737                                 em_dev_clear_queues(dev);
738                                 return ret;
739                         }
740                 }
741         } else {
742                 rte_intr_callback_unregister(intr_handle,
743                                                 eth_em_interrupt_handler,
744                                                 (void *)dev);
745                 if (dev->data->dev_conf.intr_conf.lsc != 0)
746                         PMD_INIT_LOG(INFO, "lsc won't enable because of"
747                                      " no intr multiplexn");
748         }
749         /* check if rxq interrupt is enabled */
750         if (dev->data->dev_conf.intr_conf.rxq != 0)
751                 eth_em_rxq_interrupt_setup(dev);
752
753         rte_intr_enable(intr_handle);
754
755         adapter->stopped = 0;
756
757         PMD_INIT_LOG(DEBUG, "<<");
758
759         return 0;
760
761 error_invalid_config:
762         PMD_INIT_LOG(ERR, "Invalid advertised speeds (%u) for port %u",
763                      dev->data->dev_conf.link_speeds, dev->data->port_id);
764         em_dev_clear_queues(dev);
765         return -EINVAL;
766 }
767
768 /*********************************************************************
769  *
770  *  This routine disables all traffic on the adapter by issuing a
771  *  global reset on the MAC.
772  *
773  **********************************************************************/
774 static void
775 eth_em_stop(struct rte_eth_dev *dev)
776 {
777         struct rte_eth_link link;
778         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
779         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
780         struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
781
782         em_rxq_intr_disable(hw);
783         em_lsc_intr_disable(hw);
784
785         e1000_reset_hw(hw);
786         if (hw->mac.type >= e1000_82544)
787                 E1000_WRITE_REG(hw, E1000_WUC, 0);
788
789         /* Power down the phy. Needed to make the link go down */
790         e1000_power_down_phy(hw);
791
792         em_dev_clear_queues(dev);
793
794         /* clear the recorded link status */
795         memset(&link, 0, sizeof(link));
796         rte_em_dev_atomic_write_link_status(dev, &link);
797
798         if (!rte_intr_allow_others(intr_handle))
799                 /* resume to the default handler */
800                 rte_intr_callback_register(intr_handle,
801                                            eth_em_interrupt_handler,
802                                            (void *)dev);
803
804         /* Clean datapath event and queue/vec mapping */
805         rte_intr_efd_disable(intr_handle);
806         if (intr_handle->intr_vec != NULL) {
807                 rte_free(intr_handle->intr_vec);
808                 intr_handle->intr_vec = NULL;
809         }
810 }
811
812 static void
813 eth_em_close(struct rte_eth_dev *dev)
814 {
815         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
816         struct e1000_adapter *adapter =
817                 E1000_DEV_PRIVATE(dev->data->dev_private);
818
819         eth_em_stop(dev);
820         adapter->stopped = 1;
821         em_dev_free_queues(dev);
822         e1000_phy_hw_reset(hw);
823         em_release_manageability(hw);
824         em_hw_control_release(hw);
825 }
826
827 static int
828 em_get_rx_buffer_size(struct e1000_hw *hw)
829 {
830         uint32_t rx_buf_size;
831
832         rx_buf_size = ((E1000_READ_REG(hw, E1000_PBA) & UINT16_MAX) << 10);
833         return rx_buf_size;
834 }
835
836 /*********************************************************************
837  *
838  *  Initialize the hardware
839  *
840  **********************************************************************/
841 static int
842 em_hardware_init(struct e1000_hw *hw)
843 {
844         uint32_t rx_buf_size;
845         int diag;
846
847         /* Issue a global reset */
848         e1000_reset_hw(hw);
849
850         /* Let the firmware know the OS is in control */
851         em_hw_control_acquire(hw);
852
853         /*
854          * These parameters control the automatic generation (Tx) and
855          * response (Rx) to Ethernet PAUSE frames.
856          * - High water mark should allow for at least two standard size (1518)
857          *   frames to be received after sending an XOFF.
858          * - Low water mark works best when it is very near the high water mark.
859          *   This allows the receiver to restart by sending XON when it has
860          *   drained a bit. Here we use an arbitrary value of 1500 which will
861          *   restart after one full frame is pulled from the buffer. There
862          *   could be several smaller frames in the buffer and if so they will
863          *   not trigger the XON until their total number reduces the buffer
864          *   by 1500.
865          * - The pause time is fairly large at 1000 x 512ns = 512 usec.
866          */
867         rx_buf_size = em_get_rx_buffer_size(hw);
868
869         hw->fc.high_water = rx_buf_size - PMD_ROUNDUP(ETHER_MAX_LEN * 2, 1024);
870         hw->fc.low_water = hw->fc.high_water - 1500;
871
872         if (hw->mac.type == e1000_80003es2lan)
873                 hw->fc.pause_time = UINT16_MAX;
874         else
875                 hw->fc.pause_time = EM_FC_PAUSE_TIME;
876
877         hw->fc.send_xon = 1;
878
879         /* Set Flow control, use the tunable location if sane */
880         if (em_fc_setting <= e1000_fc_full)
881                 hw->fc.requested_mode = em_fc_setting;
882         else
883                 hw->fc.requested_mode = e1000_fc_none;
884
885         /* Workaround: no TX flow ctrl for PCH */
886         if (hw->mac.type == e1000_pchlan)
887                 hw->fc.requested_mode = e1000_fc_rx_pause;
888
889         /* Override - settings for PCH2LAN, ya its magic :) */
890         if (hw->mac.type == e1000_pch2lan) {
891                 hw->fc.high_water = 0x5C20;
892                 hw->fc.low_water = 0x5048;
893                 hw->fc.pause_time = 0x0650;
894                 hw->fc.refresh_time = 0x0400;
895         } else if (hw->mac.type == e1000_pch_lpt ||
896                    hw->mac.type == e1000_pch_spt ||
897                    hw->mac.type == e1000_pch_cnp) {
898                 hw->fc.requested_mode = e1000_fc_full;
899         }
900
901         diag = e1000_init_hw(hw);
902         if (diag < 0)
903                 return diag;
904         e1000_check_for_link(hw);
905         return 0;
906 }
907
908 /* This function is based on em_update_stats_counters() in e1000/if_em.c */
909 static int
910 eth_em_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *rte_stats)
911 {
912         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
913         struct e1000_hw_stats *stats =
914                         E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
915         int pause_frames;
916
917         if(hw->phy.media_type == e1000_media_type_copper ||
918                         (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
919                 stats->symerrs += E1000_READ_REG(hw,E1000_SYMERRS);
920                 stats->sec += E1000_READ_REG(hw, E1000_SEC);
921         }
922
923         stats->crcerrs += E1000_READ_REG(hw, E1000_CRCERRS);
924         stats->mpc += E1000_READ_REG(hw, E1000_MPC);
925         stats->scc += E1000_READ_REG(hw, E1000_SCC);
926         stats->ecol += E1000_READ_REG(hw, E1000_ECOL);
927
928         stats->mcc += E1000_READ_REG(hw, E1000_MCC);
929         stats->latecol += E1000_READ_REG(hw, E1000_LATECOL);
930         stats->colc += E1000_READ_REG(hw, E1000_COLC);
931         stats->dc += E1000_READ_REG(hw, E1000_DC);
932         stats->rlec += E1000_READ_REG(hw, E1000_RLEC);
933         stats->xonrxc += E1000_READ_REG(hw, E1000_XONRXC);
934         stats->xontxc += E1000_READ_REG(hw, E1000_XONTXC);
935
936         /*
937          * For watchdog management we need to know if we have been
938          * paused during the last interval, so capture that here.
939          */
940         pause_frames = E1000_READ_REG(hw, E1000_XOFFRXC);
941         stats->xoffrxc += pause_frames;
942         stats->xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC);
943         stats->fcruc += E1000_READ_REG(hw, E1000_FCRUC);
944         stats->prc64 += E1000_READ_REG(hw, E1000_PRC64);
945         stats->prc127 += E1000_READ_REG(hw, E1000_PRC127);
946         stats->prc255 += E1000_READ_REG(hw, E1000_PRC255);
947         stats->prc511 += E1000_READ_REG(hw, E1000_PRC511);
948         stats->prc1023 += E1000_READ_REG(hw, E1000_PRC1023);
949         stats->prc1522 += E1000_READ_REG(hw, E1000_PRC1522);
950         stats->gprc += E1000_READ_REG(hw, E1000_GPRC);
951         stats->bprc += E1000_READ_REG(hw, E1000_BPRC);
952         stats->mprc += E1000_READ_REG(hw, E1000_MPRC);
953         stats->gptc += E1000_READ_REG(hw, E1000_GPTC);
954
955         /*
956          * For the 64-bit byte counters the low dword must be read first.
957          * Both registers clear on the read of the high dword.
958          */
959
960         stats->gorc += E1000_READ_REG(hw, E1000_GORCL);
961         stats->gorc += ((uint64_t)E1000_READ_REG(hw, E1000_GORCH) << 32);
962         stats->gotc += E1000_READ_REG(hw, E1000_GOTCL);
963         stats->gotc += ((uint64_t)E1000_READ_REG(hw, E1000_GOTCH) << 32);
964
965         stats->rnbc += E1000_READ_REG(hw, E1000_RNBC);
966         stats->ruc += E1000_READ_REG(hw, E1000_RUC);
967         stats->rfc += E1000_READ_REG(hw, E1000_RFC);
968         stats->roc += E1000_READ_REG(hw, E1000_ROC);
969         stats->rjc += E1000_READ_REG(hw, E1000_RJC);
970
971         stats->tor += E1000_READ_REG(hw, E1000_TORH);
972         stats->tot += E1000_READ_REG(hw, E1000_TOTH);
973
974         stats->tpr += E1000_READ_REG(hw, E1000_TPR);
975         stats->tpt += E1000_READ_REG(hw, E1000_TPT);
976         stats->ptc64 += E1000_READ_REG(hw, E1000_PTC64);
977         stats->ptc127 += E1000_READ_REG(hw, E1000_PTC127);
978         stats->ptc255 += E1000_READ_REG(hw, E1000_PTC255);
979         stats->ptc511 += E1000_READ_REG(hw, E1000_PTC511);
980         stats->ptc1023 += E1000_READ_REG(hw, E1000_PTC1023);
981         stats->ptc1522 += E1000_READ_REG(hw, E1000_PTC1522);
982         stats->mptc += E1000_READ_REG(hw, E1000_MPTC);
983         stats->bptc += E1000_READ_REG(hw, E1000_BPTC);
984
985         /* Interrupt Counts */
986
987         if (hw->mac.type >= e1000_82571) {
988                 stats->iac += E1000_READ_REG(hw, E1000_IAC);
989                 stats->icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC);
990                 stats->icrxatc += E1000_READ_REG(hw, E1000_ICRXATC);
991                 stats->ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC);
992                 stats->ictxatc += E1000_READ_REG(hw, E1000_ICTXATC);
993                 stats->ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC);
994                 stats->ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC);
995                 stats->icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC);
996                 stats->icrxoc += E1000_READ_REG(hw, E1000_ICRXOC);
997         }
998
999         if (hw->mac.type >= e1000_82543) {
1000                 stats->algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC);
1001                 stats->rxerrc += E1000_READ_REG(hw, E1000_RXERRC);
1002                 stats->tncrs += E1000_READ_REG(hw, E1000_TNCRS);
1003                 stats->cexterr += E1000_READ_REG(hw, E1000_CEXTERR);
1004                 stats->tsctc += E1000_READ_REG(hw, E1000_TSCTC);
1005                 stats->tsctfc += E1000_READ_REG(hw, E1000_TSCTFC);
1006         }
1007
1008         if (rte_stats == NULL)
1009                 return -EINVAL;
1010
1011         /* Rx Errors */
1012         rte_stats->imissed = stats->mpc;
1013         rte_stats->ierrors = stats->crcerrs +
1014                              stats->rlec + stats->ruc + stats->roc +
1015                              stats->rxerrc + stats->algnerrc + stats->cexterr;
1016
1017         /* Tx Errors */
1018         rte_stats->oerrors = stats->ecol + stats->latecol;
1019
1020         rte_stats->ipackets = stats->gprc;
1021         rte_stats->opackets = stats->gptc;
1022         rte_stats->ibytes   = stats->gorc;
1023         rte_stats->obytes   = stats->gotc;
1024         return 0;
1025 }
1026
1027 static void
1028 eth_em_stats_reset(struct rte_eth_dev *dev)
1029 {
1030         struct e1000_hw_stats *hw_stats =
1031                         E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
1032
1033         /* HW registers are cleared on read */
1034         eth_em_stats_get(dev, NULL);
1035
1036         /* Reset software totals */
1037         memset(hw_stats, 0, sizeof(*hw_stats));
1038 }
1039
1040 static int
1041 eth_em_rx_queue_intr_enable(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id)
1042 {
1043         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1044         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
1045         struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
1046
1047         em_rxq_intr_enable(hw);
1048         rte_intr_enable(intr_handle);
1049
1050         return 0;
1051 }
1052
1053 static int
1054 eth_em_rx_queue_intr_disable(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id)
1055 {
1056         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1057
1058         em_rxq_intr_disable(hw);
1059
1060         return 0;
1061 }
1062
1063 static uint32_t
1064 em_get_max_pktlen(const struct e1000_hw *hw)
1065 {
1066         switch (hw->mac.type) {
1067         case e1000_82571:
1068         case e1000_82572:
1069         case e1000_ich9lan:
1070         case e1000_ich10lan:
1071         case e1000_pch2lan:
1072         case e1000_pch_lpt:
1073         case e1000_pch_spt:
1074         case e1000_pch_cnp:
1075         case e1000_82574:
1076         case e1000_80003es2lan: /* 9K Jumbo Frame size */
1077         case e1000_82583:
1078                 return 0x2412;
1079         case e1000_pchlan:
1080                 return 0x1000;
1081         /* Adapters that do not support jumbo frames */
1082         case e1000_ich8lan:
1083                 return ETHER_MAX_LEN;
1084         default:
1085                 return MAX_JUMBO_FRAME_SIZE;
1086         }
1087 }
1088
1089 static void
1090 eth_em_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
1091 {
1092         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1093
1094         dev_info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
1095         dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
1096         dev_info->max_rx_pktlen = em_get_max_pktlen(hw);
1097         dev_info->max_mac_addrs = hw->mac.rar_entry_count;
1098         dev_info->rx_offload_capa =
1099                 DEV_RX_OFFLOAD_VLAN_STRIP |
1100                 DEV_RX_OFFLOAD_IPV4_CKSUM |
1101                 DEV_RX_OFFLOAD_UDP_CKSUM  |
1102                 DEV_RX_OFFLOAD_TCP_CKSUM;
1103         dev_info->tx_offload_capa =
1104                 DEV_TX_OFFLOAD_VLAN_INSERT |
1105                 DEV_TX_OFFLOAD_IPV4_CKSUM  |
1106                 DEV_TX_OFFLOAD_UDP_CKSUM   |
1107                 DEV_TX_OFFLOAD_TCP_CKSUM;
1108
1109         /*
1110          * Starting with 631xESB hw supports 2 TX/RX queues per port.
1111          * Unfortunatelly, all these nics have just one TX context.
1112          * So we have few choises for TX:
1113          * - Use just one TX queue.
1114          * - Allow cksum offload only for one TX queue.
1115          * - Don't allow TX cksum offload at all.
1116          * For now, option #1 was chosen.
1117          * To use second RX queue we have to use extended RX descriptor
1118          * (Multiple Receive Queues are mutually exclusive with UDP
1119          * fragmentation and are not supported when a legacy receive
1120          * descriptor format is used).
1121          * Which means separate RX routinies - as legacy nics (82540, 82545)
1122          * don't support extended RXD.
1123          * To avoid it we support just one RX queue for now (no RSS).
1124          */
1125
1126         dev_info->max_rx_queues = 1;
1127         dev_info->max_tx_queues = 1;
1128
1129         dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
1130                 .nb_max = E1000_MAX_RING_DESC,
1131                 .nb_min = E1000_MIN_RING_DESC,
1132                 .nb_align = EM_RXD_ALIGN,
1133         };
1134
1135         dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
1136                 .nb_max = E1000_MAX_RING_DESC,
1137                 .nb_min = E1000_MIN_RING_DESC,
1138                 .nb_align = EM_TXD_ALIGN,
1139                 .nb_seg_max = EM_TX_MAX_SEG,
1140                 .nb_mtu_seg_max = EM_TX_MAX_MTU_SEG,
1141         };
1142
1143         dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
1144                         ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
1145                         ETH_LINK_SPEED_1G;
1146 }
1147
1148 /* return 0 means link status changed, -1 means not changed */
1149 static int
1150 eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
1151 {
1152         struct e1000_hw *hw =
1153                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1154         struct rte_eth_link link, old;
1155         int link_check, count;
1156
1157         link_check = 0;
1158         hw->mac.get_link_status = 1;
1159
1160         /* possible wait-to-complete in up to 9 seconds */
1161         for (count = 0; count < EM_LINK_UPDATE_CHECK_TIMEOUT; count ++) {
1162                 /* Read the real link status */
1163                 switch (hw->phy.media_type) {
1164                 case e1000_media_type_copper:
1165                         /* Do the work to read phy */
1166                         e1000_check_for_link(hw);
1167                         link_check = !hw->mac.get_link_status;
1168                         break;
1169
1170                 case e1000_media_type_fiber:
1171                         e1000_check_for_link(hw);
1172                         link_check = (E1000_READ_REG(hw, E1000_STATUS) &
1173                                         E1000_STATUS_LU);
1174                         break;
1175
1176                 case e1000_media_type_internal_serdes:
1177                         e1000_check_for_link(hw);
1178                         link_check = hw->mac.serdes_has_link;
1179                         break;
1180
1181                 default:
1182                         break;
1183                 }
1184                 if (link_check || wait_to_complete == 0)
1185                         break;
1186                 rte_delay_ms(EM_LINK_UPDATE_CHECK_INTERVAL);
1187         }
1188         memset(&link, 0, sizeof(link));
1189         rte_em_dev_atomic_read_link_status(dev, &link);
1190         old = link;
1191
1192         /* Now we check if a transition has happened */
1193         if (link_check && (link.link_status == ETH_LINK_DOWN)) {
1194                 uint16_t duplex, speed;
1195                 hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
1196                 link.link_duplex = (duplex == FULL_DUPLEX) ?
1197                                 ETH_LINK_FULL_DUPLEX :
1198                                 ETH_LINK_HALF_DUPLEX;
1199                 link.link_speed = speed;
1200                 link.link_status = ETH_LINK_UP;
1201                 link.link_autoneg = !(dev->data->dev_conf.link_speeds &
1202                                 ETH_LINK_SPEED_FIXED);
1203         } else if (!link_check && (link.link_status == ETH_LINK_UP)) {
1204                 link.link_speed = 0;
1205                 link.link_duplex = ETH_LINK_HALF_DUPLEX;
1206                 link.link_status = ETH_LINK_DOWN;
1207                 link.link_autoneg = ETH_LINK_SPEED_FIXED;
1208         }
1209         rte_em_dev_atomic_write_link_status(dev, &link);
1210
1211         /* not changed */
1212         if (old.link_status == link.link_status)
1213                 return -1;
1214
1215         /* changed */
1216         return 0;
1217 }
1218
1219 /*
1220  * em_hw_control_acquire sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
1221  * For ASF and Pass Through versions of f/w this means
1222  * that the driver is loaded. For AMT version type f/w
1223  * this means that the network i/f is open.
1224  */
1225 static void
1226 em_hw_control_acquire(struct e1000_hw *hw)
1227 {
1228         uint32_t ctrl_ext, swsm;
1229
1230         /* Let firmware know the driver has taken over */
1231         if (hw->mac.type == e1000_82573) {
1232                 swsm = E1000_READ_REG(hw, E1000_SWSM);
1233                 E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_DRV_LOAD);
1234
1235         } else {
1236                 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
1237                 E1000_WRITE_REG(hw, E1000_CTRL_EXT,
1238                         ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1239         }
1240 }
1241
1242 /*
1243  * em_hw_control_release resets {CTRL_EXTT|FWSM}:DRV_LOAD bit.
1244  * For ASF and Pass Through versions of f/w this means that the
1245  * driver is no longer loaded. For AMT versions of the
1246  * f/w this means that the network i/f is closed.
1247  */
1248 static void
1249 em_hw_control_release(struct e1000_hw *hw)
1250 {
1251         uint32_t ctrl_ext, swsm;
1252
1253         /* Let firmware taken over control of h/w */
1254         if (hw->mac.type == e1000_82573) {
1255                 swsm = E1000_READ_REG(hw, E1000_SWSM);
1256                 E1000_WRITE_REG(hw, E1000_SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
1257         } else {
1258                 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
1259                 E1000_WRITE_REG(hw, E1000_CTRL_EXT,
1260                         ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1261         }
1262 }
1263
1264 /*
1265  * Bit of a misnomer, what this really means is
1266  * to enable OS management of the system... aka
1267  * to disable special hardware management features.
1268  */
1269 static void
1270 em_init_manageability(struct e1000_hw *hw)
1271 {
1272         if (e1000_enable_mng_pass_thru(hw)) {
1273                 uint32_t manc2h = E1000_READ_REG(hw, E1000_MANC2H);
1274                 uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
1275
1276                 /* disable hardware interception of ARP */
1277                 manc &= ~(E1000_MANC_ARP_EN);
1278
1279                 /* enable receiving management packets to the host */
1280                 manc |= E1000_MANC_EN_MNG2HOST;
1281                 manc2h |= 1 << 5;  /* Mng Port 623 */
1282                 manc2h |= 1 << 6;  /* Mng Port 664 */
1283                 E1000_WRITE_REG(hw, E1000_MANC2H, manc2h);
1284                 E1000_WRITE_REG(hw, E1000_MANC, manc);
1285         }
1286 }
1287
1288 /*
1289  * Give control back to hardware management
1290  * controller if there is one.
1291  */
1292 static void
1293 em_release_manageability(struct e1000_hw *hw)
1294 {
1295         uint32_t manc;
1296
1297         if (e1000_enable_mng_pass_thru(hw)) {
1298                 manc = E1000_READ_REG(hw, E1000_MANC);
1299
1300                 /* re-enable hardware interception of ARP */
1301                 manc |= E1000_MANC_ARP_EN;
1302                 manc &= ~E1000_MANC_EN_MNG2HOST;
1303
1304                 E1000_WRITE_REG(hw, E1000_MANC, manc);
1305         }
1306 }
1307
1308 static void
1309 eth_em_promiscuous_enable(struct rte_eth_dev *dev)
1310 {
1311         struct e1000_hw *hw =
1312                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1313         uint32_t rctl;
1314
1315         rctl = E1000_READ_REG(hw, E1000_RCTL);
1316         rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
1317         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1318 }
1319
1320 static void
1321 eth_em_promiscuous_disable(struct rte_eth_dev *dev)
1322 {
1323         struct e1000_hw *hw =
1324                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1325         uint32_t rctl;
1326
1327         rctl = E1000_READ_REG(hw, E1000_RCTL);
1328         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_SBP);
1329         if (dev->data->all_multicast == 1)
1330                 rctl |= E1000_RCTL_MPE;
1331         else
1332                 rctl &= (~E1000_RCTL_MPE);
1333         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1334 }
1335
1336 static void
1337 eth_em_allmulticast_enable(struct rte_eth_dev *dev)
1338 {
1339         struct e1000_hw *hw =
1340                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1341         uint32_t rctl;
1342
1343         rctl = E1000_READ_REG(hw, E1000_RCTL);
1344         rctl |= E1000_RCTL_MPE;
1345         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1346 }
1347
1348 static void
1349 eth_em_allmulticast_disable(struct rte_eth_dev *dev)
1350 {
1351         struct e1000_hw *hw =
1352                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1353         uint32_t rctl;
1354
1355         if (dev->data->promiscuous == 1)
1356                 return; /* must remain in all_multicast mode */
1357         rctl = E1000_READ_REG(hw, E1000_RCTL);
1358         rctl &= (~E1000_RCTL_MPE);
1359         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1360 }
1361
1362 static int
1363 eth_em_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
1364 {
1365         struct e1000_hw *hw =
1366                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1367         struct e1000_vfta * shadow_vfta =
1368                 E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
1369         uint32_t vfta;
1370         uint32_t vid_idx;
1371         uint32_t vid_bit;
1372
1373         vid_idx = (uint32_t) ((vlan_id >> E1000_VFTA_ENTRY_SHIFT) &
1374                               E1000_VFTA_ENTRY_MASK);
1375         vid_bit = (uint32_t) (1 << (vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK));
1376         vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, vid_idx);
1377         if (on)
1378                 vfta |= vid_bit;
1379         else
1380                 vfta &= ~vid_bit;
1381         E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, vid_idx, vfta);
1382
1383         /* update local VFTA copy */
1384         shadow_vfta->vfta[vid_idx] = vfta;
1385
1386         return 0;
1387 }
1388
1389 static void
1390 em_vlan_hw_filter_disable(struct rte_eth_dev *dev)
1391 {
1392         struct e1000_hw *hw =
1393                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1394         uint32_t reg;
1395
1396         /* Filter Table Disable */
1397         reg = E1000_READ_REG(hw, E1000_RCTL);
1398         reg &= ~E1000_RCTL_CFIEN;
1399         reg &= ~E1000_RCTL_VFE;
1400         E1000_WRITE_REG(hw, E1000_RCTL, reg);
1401 }
1402
1403 static void
1404 em_vlan_hw_filter_enable(struct rte_eth_dev *dev)
1405 {
1406         struct e1000_hw *hw =
1407                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1408         struct e1000_vfta * shadow_vfta =
1409                 E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
1410         uint32_t reg;
1411         int i;
1412
1413         /* Filter Table Enable, CFI not used for packet acceptance */
1414         reg = E1000_READ_REG(hw, E1000_RCTL);
1415         reg &= ~E1000_RCTL_CFIEN;
1416         reg |= E1000_RCTL_VFE;
1417         E1000_WRITE_REG(hw, E1000_RCTL, reg);
1418
1419         /* restore vfta from local copy */
1420         for (i = 0; i < IGB_VFTA_SIZE; i++)
1421                 E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, i, shadow_vfta->vfta[i]);
1422 }
1423
1424 static void
1425 em_vlan_hw_strip_disable(struct rte_eth_dev *dev)
1426 {
1427         struct e1000_hw *hw =
1428                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1429         uint32_t reg;
1430
1431         /* VLAN Mode Disable */
1432         reg = E1000_READ_REG(hw, E1000_CTRL);
1433         reg &= ~E1000_CTRL_VME;
1434         E1000_WRITE_REG(hw, E1000_CTRL, reg);
1435
1436 }
1437
1438 static void
1439 em_vlan_hw_strip_enable(struct rte_eth_dev *dev)
1440 {
1441         struct e1000_hw *hw =
1442                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1443         uint32_t reg;
1444
1445         /* VLAN Mode Enable */
1446         reg = E1000_READ_REG(hw, E1000_CTRL);
1447         reg |= E1000_CTRL_VME;
1448         E1000_WRITE_REG(hw, E1000_CTRL, reg);
1449 }
1450
1451 static void
1452 eth_em_vlan_offload_set(struct rte_eth_dev *dev, int mask)
1453 {
1454         if(mask & ETH_VLAN_STRIP_MASK){
1455                 if (dev->data->dev_conf.rxmode.hw_vlan_strip)
1456                         em_vlan_hw_strip_enable(dev);
1457                 else
1458                         em_vlan_hw_strip_disable(dev);
1459         }
1460
1461         if(mask & ETH_VLAN_FILTER_MASK){
1462                 if (dev->data->dev_conf.rxmode.hw_vlan_filter)
1463                         em_vlan_hw_filter_enable(dev);
1464                 else
1465                         em_vlan_hw_filter_disable(dev);
1466         }
1467 }
1468
1469 /*
1470  * It enables the interrupt mask and then enable the interrupt.
1471  *
1472  * @param dev
1473  *  Pointer to struct rte_eth_dev.
1474  *
1475  * @return
1476  *  - On success, zero.
1477  *  - On failure, a negative value.
1478  */
1479 static int
1480 eth_em_interrupt_setup(struct rte_eth_dev *dev)
1481 {
1482         uint32_t regval;
1483         struct e1000_hw *hw =
1484                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1485
1486         /* clear interrupt */
1487         E1000_READ_REG(hw, E1000_ICR);
1488         regval = E1000_READ_REG(hw, E1000_IMS);
1489         E1000_WRITE_REG(hw, E1000_IMS, regval | E1000_ICR_LSC);
1490         return 0;
1491 }
1492
1493 /*
1494  * It clears the interrupt causes and enables the interrupt.
1495  * It will be called once only during nic initialized.
1496  *
1497  * @param dev
1498  *  Pointer to struct rte_eth_dev.
1499  *
1500  * @return
1501  *  - On success, zero.
1502  *  - On failure, a negative value.
1503  */
1504 static int
1505 eth_em_rxq_interrupt_setup(struct rte_eth_dev *dev)
1506 {
1507         struct e1000_hw *hw =
1508         E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1509
1510         E1000_READ_REG(hw, E1000_ICR);
1511         em_rxq_intr_enable(hw);
1512         return 0;
1513 }
1514
1515 /*
1516  * It enable receive packet interrupt.
1517  * @param hw
1518  * Pointer to struct e1000_hw
1519  *
1520  * @return
1521  */
1522 static void
1523 em_rxq_intr_enable(struct e1000_hw *hw)
1524 {
1525         E1000_WRITE_REG(hw, E1000_IMS, E1000_IMS_RXT0);
1526         E1000_WRITE_FLUSH(hw);
1527 }
1528
1529 /*
1530  * It disabled lsc interrupt.
1531  * @param hw
1532  * Pointer to struct e1000_hw
1533  *
1534  * @return
1535  */
1536 static void
1537 em_lsc_intr_disable(struct e1000_hw *hw)
1538 {
1539         E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_LSC);
1540         E1000_WRITE_FLUSH(hw);
1541 }
1542
1543 /*
1544  * It disabled receive packet interrupt.
1545  * @param hw
1546  * Pointer to struct e1000_hw
1547  *
1548  * @return
1549  */
1550 static void
1551 em_rxq_intr_disable(struct e1000_hw *hw)
1552 {
1553         E1000_READ_REG(hw, E1000_ICR);
1554         E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_RXT0);
1555         E1000_WRITE_FLUSH(hw);
1556 }
1557
1558 /*
1559  * It reads ICR and gets interrupt causes, check it and set a bit flag
1560  * to update link status.
1561  *
1562  * @param dev
1563  *  Pointer to struct rte_eth_dev.
1564  *
1565  * @return
1566  *  - On success, zero.
1567  *  - On failure, a negative value.
1568  */
1569 static int
1570 eth_em_interrupt_get_status(struct rte_eth_dev *dev)
1571 {
1572         uint32_t icr;
1573         struct e1000_hw *hw =
1574                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1575         struct e1000_interrupt *intr =
1576                 E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
1577
1578         /* read-on-clear nic registers here */
1579         icr = E1000_READ_REG(hw, E1000_ICR);
1580         if (icr & E1000_ICR_LSC) {
1581                 intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
1582         }
1583
1584         return 0;
1585 }
1586
1587 /*
1588  * It executes link_update after knowing an interrupt is prsent.
1589  *
1590  * @param dev
1591  *  Pointer to struct rte_eth_dev.
1592  *
1593  * @return
1594  *  - On success, zero.
1595  *  - On failure, a negative value.
1596  */
1597 static int
1598 eth_em_interrupt_action(struct rte_eth_dev *dev,
1599                         struct rte_intr_handle *intr_handle)
1600 {
1601         struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
1602         struct e1000_hw *hw =
1603                 E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1604         struct e1000_interrupt *intr =
1605                 E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
1606         uint32_t tctl, rctl;
1607         struct rte_eth_link link;
1608         int ret;
1609
1610         if (!(intr->flags & E1000_FLAG_NEED_LINK_UPDATE))
1611                 return -1;
1612
1613         intr->flags &= ~E1000_FLAG_NEED_LINK_UPDATE;
1614         rte_intr_enable(intr_handle);
1615
1616         /* set get_link_status to check register later */
1617         hw->mac.get_link_status = 1;
1618         ret = eth_em_link_update(dev, 0);
1619
1620         /* check if link has changed */
1621         if (ret < 0)
1622                 return 0;
1623
1624         memset(&link, 0, sizeof(link));
1625         rte_em_dev_atomic_read_link_status(dev, &link);
1626         if (link.link_status) {
1627                 PMD_INIT_LOG(INFO, " Port %d: Link Up - speed %u Mbps - %s",
1628                              dev->data->port_id, link.link_speed,
1629                              link.link_duplex == ETH_LINK_FULL_DUPLEX ?
1630                              "full-duplex" : "half-duplex");
1631         } else {
1632                 PMD_INIT_LOG(INFO, " Port %d: Link Down", dev->data->port_id);
1633         }
1634         PMD_INIT_LOG(DEBUG, "PCI Address: %04d:%02d:%02d:%d",
1635                      pci_dev->addr.domain, pci_dev->addr.bus,
1636                      pci_dev->addr.devid, pci_dev->addr.function);
1637
1638         tctl = E1000_READ_REG(hw, E1000_TCTL);
1639         rctl = E1000_READ_REG(hw, E1000_RCTL);
1640         if (link.link_status) {
1641                 /* enable Tx/Rx */
1642                 tctl |= E1000_TCTL_EN;
1643                 rctl |= E1000_RCTL_EN;
1644         } else {
1645                 /* disable Tx/Rx */
1646                 tctl &= ~E1000_TCTL_EN;
1647                 rctl &= ~E1000_RCTL_EN;
1648         }
1649         E1000_WRITE_REG(hw, E1000_TCTL, tctl);
1650         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1651         E1000_WRITE_FLUSH(hw);
1652
1653         return 0;
1654 }
1655
1656 /**
1657  * Interrupt handler which shall be registered at first.
1658  *
1659  * @param handle
1660  *  Pointer to interrupt handle.
1661  * @param param
1662  *  The address of parameter (struct rte_eth_dev *) regsitered before.
1663  *
1664  * @return
1665  *  void
1666  */
1667 static void
1668 eth_em_interrupt_handler(void *param)
1669 {
1670         struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
1671
1672         eth_em_interrupt_get_status(dev);
1673         eth_em_interrupt_action(dev, dev->intr_handle);
1674         _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL, NULL);
1675 }
1676
1677 static int
1678 eth_em_led_on(struct rte_eth_dev *dev)
1679 {
1680         struct e1000_hw *hw;
1681
1682         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1683         return e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
1684 }
1685
1686 static int
1687 eth_em_led_off(struct rte_eth_dev *dev)
1688 {
1689         struct e1000_hw *hw;
1690
1691         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1692         return e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
1693 }
1694
1695 static int
1696 eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
1697 {
1698         struct e1000_hw *hw;
1699         uint32_t ctrl;
1700         int tx_pause;
1701         int rx_pause;
1702
1703         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1704         fc_conf->pause_time = hw->fc.pause_time;
1705         fc_conf->high_water = hw->fc.high_water;
1706         fc_conf->low_water = hw->fc.low_water;
1707         fc_conf->send_xon = hw->fc.send_xon;
1708         fc_conf->autoneg = hw->mac.autoneg;
1709
1710         /*
1711          * Return rx_pause and tx_pause status according to actual setting of
1712          * the TFCE and RFCE bits in the CTRL register.
1713          */
1714         ctrl = E1000_READ_REG(hw, E1000_CTRL);
1715         if (ctrl & E1000_CTRL_TFCE)
1716                 tx_pause = 1;
1717         else
1718                 tx_pause = 0;
1719
1720         if (ctrl & E1000_CTRL_RFCE)
1721                 rx_pause = 1;
1722         else
1723                 rx_pause = 0;
1724
1725         if (rx_pause && tx_pause)
1726                 fc_conf->mode = RTE_FC_FULL;
1727         else if (rx_pause)
1728                 fc_conf->mode = RTE_FC_RX_PAUSE;
1729         else if (tx_pause)
1730                 fc_conf->mode = RTE_FC_TX_PAUSE;
1731         else
1732                 fc_conf->mode = RTE_FC_NONE;
1733
1734         return 0;
1735 }
1736
1737 static int
1738 eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
1739 {
1740         struct e1000_hw *hw;
1741         int err;
1742         enum e1000_fc_mode rte_fcmode_2_e1000_fcmode[] = {
1743                 e1000_fc_none,
1744                 e1000_fc_rx_pause,
1745                 e1000_fc_tx_pause,
1746                 e1000_fc_full
1747         };
1748         uint32_t rx_buf_size;
1749         uint32_t max_high_water;
1750         uint32_t rctl;
1751
1752         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1753         if (fc_conf->autoneg != hw->mac.autoneg)
1754                 return -ENOTSUP;
1755         rx_buf_size = em_get_rx_buffer_size(hw);
1756         PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
1757
1758         /* At least reserve one Ethernet frame for watermark */
1759         max_high_water = rx_buf_size - ETHER_MAX_LEN;
1760         if ((fc_conf->high_water > max_high_water) ||
1761             (fc_conf->high_water < fc_conf->low_water)) {
1762                 PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value");
1763                 PMD_INIT_LOG(ERR, "high water must <= 0x%x", max_high_water);
1764                 return -EINVAL;
1765         }
1766
1767         hw->fc.requested_mode = rte_fcmode_2_e1000_fcmode[fc_conf->mode];
1768         hw->fc.pause_time     = fc_conf->pause_time;
1769         hw->fc.high_water     = fc_conf->high_water;
1770         hw->fc.low_water      = fc_conf->low_water;
1771         hw->fc.send_xon       = fc_conf->send_xon;
1772
1773         err = e1000_setup_link_generic(hw);
1774         if (err == E1000_SUCCESS) {
1775
1776                 /* check if we want to forward MAC frames - driver doesn't have native
1777                  * capability to do that, so we'll write the registers ourselves */
1778
1779                 rctl = E1000_READ_REG(hw, E1000_RCTL);
1780
1781                 /* set or clear MFLCN.PMCF bit depending on configuration */
1782                 if (fc_conf->mac_ctrl_frame_fwd != 0)
1783                         rctl |= E1000_RCTL_PMCF;
1784                 else
1785                         rctl &= ~E1000_RCTL_PMCF;
1786
1787                 E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1788                 E1000_WRITE_FLUSH(hw);
1789
1790                 return 0;
1791         }
1792
1793         PMD_INIT_LOG(ERR, "e1000_setup_link_generic = 0x%x", err);
1794         return -EIO;
1795 }
1796
1797 static int
1798 eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
1799                 uint32_t index, __rte_unused uint32_t pool)
1800 {
1801         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1802
1803         return e1000_rar_set(hw, mac_addr->addr_bytes, index);
1804 }
1805
1806 static void
1807 eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index)
1808 {
1809         uint8_t addr[ETHER_ADDR_LEN];
1810         struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1811
1812         memset(addr, 0, sizeof(addr));
1813
1814         e1000_rar_set(hw, addr, index);
1815 }
1816
1817 static int
1818 eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
1819 {
1820         struct rte_eth_dev_info dev_info;
1821         struct e1000_hw *hw;
1822         uint32_t frame_size;
1823         uint32_t rctl;
1824
1825         eth_em_infos_get(dev, &dev_info);
1826         frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE;
1827
1828         /* check that mtu is within the allowed range */
1829         if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
1830                 return -EINVAL;
1831
1832         /* refuse mtu that requires the support of scattered packets when this
1833          * feature has not been enabled before. */
1834         if (!dev->data->scattered_rx &&
1835             frame_size > dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)
1836                 return -EINVAL;
1837
1838         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1839         rctl = E1000_READ_REG(hw, E1000_RCTL);
1840
1841         /* switch to jumbo mode if needed */
1842         if (frame_size > ETHER_MAX_LEN) {
1843                 dev->data->dev_conf.rxmode.jumbo_frame = 1;
1844                 rctl |= E1000_RCTL_LPE;
1845         } else {
1846                 dev->data->dev_conf.rxmode.jumbo_frame = 0;
1847                 rctl &= ~E1000_RCTL_LPE;
1848         }
1849         E1000_WRITE_REG(hw, E1000_RCTL, rctl);
1850
1851         /* update max frame size */
1852         dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
1853         return 0;
1854 }
1855
1856 static int
1857 eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
1858                         struct ether_addr *mc_addr_set,
1859                         uint32_t nb_mc_addr)
1860 {
1861         struct e1000_hw *hw;
1862
1863         hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1864         e1000_update_mc_addr_list(hw, (u8 *)mc_addr_set, nb_mc_addr);
1865         return 0;
1866 }
1867
1868 RTE_PMD_REGISTER_PCI(net_e1000_em, rte_em_pmd);
1869 RTE_PMD_REGISTER_PCI_TABLE(net_e1000_em, pci_id_em_map);
1870 RTE_PMD_REGISTER_KMOD_DEP(net_e1000_em, "* igb_uio | uio_pci_generic | vfio-pci");