drivers/net/mlx5/mlx5.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2015 6WIND S.A.
   3  * Copyright 2015 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stddef.h>
   7 #include <unistd.h>
   8 #include <string.h>
   9 #include <assert.h>
  10 #include <dlfcn.h>
  11 #include <stdint.h>
  12 #include <stdlib.h>
  13 #include <errno.h>
  14 #include <net/if.h>
  15 #include <sys/mman.h>
  16 #include <linux/rtnetlink.h>
  17
  18 /* Verbs header. */
  19 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
  20 #ifdef PEDANTIC
  21 #pragma GCC diagnostic ignored "-Wpedantic"
  22 #endif
  23 #include <infiniband/verbs.h>
  24 #ifdef PEDANTIC
  25 #pragma GCC diagnostic error "-Wpedantic"
  26 #endif
  27
  28 #include <rte_malloc.h>
  29 #include <rte_ethdev_driver.h>
  30 #include <rte_ethdev_pci.h>
  31 #include <rte_pci.h>
  32 #include <rte_bus_pci.h>
  33 #include <rte_common.h>
  34 #include <rte_config.h>
  35 #include <rte_eal_memconfig.h>
  36 #include <rte_kvargs.h>
  37 #include <rte_rwlock.h>
  38 #include <rte_spinlock.h>
  39
  40 #include "mlx5.h"
  41 #include "mlx5_utils.h"
  42 #include "mlx5_rxtx.h"
  43 #include "mlx5_autoconf.h"
  44 #include "mlx5_defs.h"
  45 #include "mlx5_glue.h"
  46 #include "mlx5_mr.h"
  47
  48 /* Device parameter to enable RX completion queue compression. */
  49 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
  50
  51 /* Device parameter to enable Multi-Packet Rx queue. */
  52 #define MLX5_RX_MPRQ_EN "mprq_en"
  53
  54 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
  55 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
  56
  57 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
  58 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
  59
  60 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
  61 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
  62
  63 /* Device parameter to configure inline send. */
  64 #define MLX5_TXQ_INLINE "txq_inline"
  65
  66 /*
  67  * Device parameter to configure the number of TX queues threshold for
  68  * enabling inline send.
  69  */
  70 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
  71
  72 /* Device parameter to enable multi-packet send WQEs. */
  73 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
  74
  75 /* Device parameter to include 2 dsegs in the title WQEBB. */
  76 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
  77
  78 /* Device parameter to limit the size of inlining packet. */
  79 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
  80
  81 /* Device parameter to enable hardware Tx vector. */
  82 #define MLX5_TX_VEC_EN "tx_vec_en"
  83
  84 /* Device parameter to enable hardware Rx vector. */
  85 #define MLX5_RX_VEC_EN "rx_vec_en"
  86
  87 /* Allow L3 VXLAN flow creation. */
  88 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
  89
  90 /* Activate Netlink support in VF mode. */
  91 #define MLX5_VF_NL_EN "vf_nl_en"
  92
  93 #ifndef HAVE_IBV_MLX5_MOD_MPW
  94 #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
  95 #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
  96 #endif
  97
  98 #ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP
  99 #define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
 100 #endif
 101
 102 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
 103
 104 /* Shared memory between primary and secondary processes. */
 105 struct mlx5_shared_data *mlx5_shared_data;
 106
 107 /* Spinlock for mlx5_shared_data allocation. */
 108 static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
 109
 110 /** Driver-specific log messages type. */
 111 int mlx5_logtype;
 112
 113 /**
 114  * Prepare shared data between primary and secondary process.
 115  */
 116 static void
 117 mlx5_prepare_shared_data(void)
 118 {
 119         const struct rte_memzone *mz;
 120
 121         rte_spinlock_lock(&mlx5_shared_data_lock);
 122         if (mlx5_shared_data == NULL) {
 123                 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
 124                         /* Allocate shared memory. */
 125                         mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
 126                                                  sizeof(*mlx5_shared_data),
 127                                                  SOCKET_ID_ANY, 0);
 128                 } else {
 129                         /* Lookup allocated shared memory. */
 130                         mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
 131                 }
 132                 if (mz == NULL)
 133                         rte_panic("Cannot allocate mlx5 shared data\n");
 134                 mlx5_shared_data = mz->addr;
 135                 /* Initialize shared data. */
 136                 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
 137                         LIST_INIT(&mlx5_shared_data->mem_event_cb_list);
 138                         rte_rwlock_init(&mlx5_shared_data->mem_event_rwlock);
 139                 }
 140                 rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
 141                                                 mlx5_mr_mem_event_cb, NULL);
 142         }
 143         rte_spinlock_unlock(&mlx5_shared_data_lock);
 144 }
 145
 146 /**
 147  * Retrieve integer value from environment variable.
 148  *
 149  * @param[in] name
 150  *   Environment variable name.
 151  *
 152  * @return
 153  *   Integer value, 0 if the variable is not set.
 154  */
 155 int
 156 mlx5_getenv_int(const char *name)
 157 {
 158         const char *val = getenv(name);
 159
 160         if (val == NULL)
 161                 return 0;
 162         return atoi(val);
 163 }
 164
 165 /**
 166  * Verbs callback to allocate a memory. This function should allocate the space
 167  * according to the size provided residing inside a huge page.
 168  * Please note that all allocation must respect the alignment from libmlx5
 169  * (i.e. currently sysconf(_SC_PAGESIZE)).
 170  *
 171  * @param[in] size
 172  *   The size in bytes of the memory to allocate.
 173  * @param[in] data
 174  *   A pointer to the callback data.
 175  *
 176  * @return
 177  *   Allocated buffer, NULL otherwise and rte_errno is set.
 178  */
 179 static void *
 180 mlx5_alloc_verbs_buf(size_t size, void *data)
 181 {
 182         struct priv *priv = data;
 183         void *ret;
 184         size_t alignment = sysconf(_SC_PAGESIZE);
 185         unsigned int socket = SOCKET_ID_ANY;
 186
 187         if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
 188                 const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
 189
 190                 socket = ctrl->socket;
 191         } else if (priv->verbs_alloc_ctx.type ==
 192                    MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
 193                 const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
 194
 195                 socket = ctrl->socket;
 196         }
 197         assert(data != NULL);
 198         ret = rte_malloc_socket(__func__, size, alignment, socket);
 199         if (!ret && size)
 200                 rte_errno = ENOMEM;
 201         return ret;
 202 }
 203
 204 /**
 205  * Verbs callback to free a memory.
 206  *
 207  * @param[in] ptr
 208  *   A pointer to the memory to free.
 209  * @param[in] data
 210  *   A pointer to the callback data.
 211  */
 212 static void
 213 mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
 214 {
 215         assert(data != NULL);
 216         rte_free(ptr);
 217 }
 218
 219 /**
 220  * DPDK callback to close the device.
 221  *
 222  * Destroy all queues and objects, free memory.
 223  *
 224  * @param dev
 225  *   Pointer to Ethernet device structure.
 226  */
 227 static void
 228 mlx5_dev_close(struct rte_eth_dev *dev)
 229 {
 230         struct priv *priv = dev->data->dev_private;
 231         unsigned int i;
 232         int ret;
 233
 234         DRV_LOG(DEBUG, "port %u closing device \"%s\"",
 235                 dev->data->port_id,
 236                 ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
 237         /* In case mlx5_dev_stop() has not been called. */
 238         mlx5_dev_interrupt_handler_uninstall(dev);
 239         mlx5_traffic_disable(dev);
 240         /* Prevent crashes when queues are still in use. */
 241         dev->rx_pkt_burst = removed_rx_burst;
 242         dev->tx_pkt_burst = removed_tx_burst;
 243         if (priv->rxqs != NULL) {
 244                 /* XXX race condition if mlx5_rx_burst() is still running. */
 245                 usleep(1000);
 246                 for (i = 0; (i != priv->rxqs_n); ++i)
 247                         mlx5_rxq_release(dev, i);
 248                 priv->rxqs_n = 0;
 249                 priv->rxqs = NULL;
 250         }
 251         if (priv->txqs != NULL) {
 252                 /* XXX race condition if mlx5_tx_burst() is still running. */
 253                 usleep(1000);
 254                 for (i = 0; (i != priv->txqs_n); ++i)
 255                         mlx5_txq_release(dev, i);
 256                 priv->txqs_n = 0;
 257                 priv->txqs = NULL;
 258         }
 259         mlx5_flow_delete_drop_queue(dev);
 260         mlx5_mprq_free_mp(dev);
 261         mlx5_mr_release(dev);
 262         if (priv->pd != NULL) {
 263                 assert(priv->ctx != NULL);
 264                 claim_zero(mlx5_glue->dealloc_pd(priv->pd));
 265                 claim_zero(mlx5_glue->close_device(priv->ctx));
 266         } else
 267                 assert(priv->ctx == NULL);
 268         if (priv->rss_conf.rss_key != NULL)
 269                 rte_free(priv->rss_conf.rss_key);
 270         if (priv->reta_idx != NULL)
 271                 rte_free(priv->reta_idx);
 272         if (priv->primary_socket)
 273                 mlx5_socket_uninit(dev);
 274         if (priv->config.vf)
 275                 mlx5_nl_mac_addr_flush(dev);
 276         if (priv->nl_socket >= 0)
 277                 close(priv->nl_socket);
 278         ret = mlx5_hrxq_ibv_verify(dev);
 279         if (ret)
 280                 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
 281                         dev->data->port_id);
 282         ret = mlx5_ind_table_ibv_verify(dev);
 283         if (ret)
 284                 DRV_LOG(WARNING, "port %u some indirection table still remain",
 285                         dev->data->port_id);
 286         ret = mlx5_rxq_ibv_verify(dev);
 287         if (ret)
 288                 DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain",
 289                         dev->data->port_id);
 290         ret = mlx5_rxq_verify(dev);
 291         if (ret)
 292                 DRV_LOG(WARNING, "port %u some Rx queues still remain",
 293                         dev->data->port_id);
 294         ret = mlx5_txq_ibv_verify(dev);
 295         if (ret)
 296                 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
 297                         dev->data->port_id);
 298         ret = mlx5_txq_verify(dev);
 299         if (ret)
 300                 DRV_LOG(WARNING, "port %u some Tx queues still remain",
 301                         dev->data->port_id);
 302         ret = mlx5_flow_verify(dev);
 303         if (ret)
 304                 DRV_LOG(WARNING, "port %u some flows still remain",
 305                         dev->data->port_id);
 306         memset(priv, 0, sizeof(*priv));
 307 }
 308
 309 const struct eth_dev_ops mlx5_dev_ops = {
 310         .dev_configure = mlx5_dev_configure,
 311         .dev_start = mlx5_dev_start,
 312         .dev_stop = mlx5_dev_stop,
 313         .dev_set_link_down = mlx5_set_link_down,
 314         .dev_set_link_up = mlx5_set_link_up,
 315         .dev_close = mlx5_dev_close,
 316         .promiscuous_enable = mlx5_promiscuous_enable,
 317         .promiscuous_disable = mlx5_promiscuous_disable,
 318         .allmulticast_enable = mlx5_allmulticast_enable,
 319         .allmulticast_disable = mlx5_allmulticast_disable,
 320         .link_update = mlx5_link_update,
 321         .stats_get = mlx5_stats_get,
 322         .stats_reset = mlx5_stats_reset,
 323         .xstats_get = mlx5_xstats_get,
 324         .xstats_reset = mlx5_xstats_reset,
 325         .xstats_get_names = mlx5_xstats_get_names,
 326         .dev_infos_get = mlx5_dev_infos_get,
 327         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
 328         .vlan_filter_set = mlx5_vlan_filter_set,
 329         .rx_queue_setup = mlx5_rx_queue_setup,
 330         .tx_queue_setup = mlx5_tx_queue_setup,
 331         .rx_queue_release = mlx5_rx_queue_release,
 332         .tx_queue_release = mlx5_tx_queue_release,
 333         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
 334         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
 335         .mac_addr_remove = mlx5_mac_addr_remove,
 336         .mac_addr_add = mlx5_mac_addr_add,
 337         .mac_addr_set = mlx5_mac_addr_set,
 338         .set_mc_addr_list = mlx5_set_mc_addr_list,
 339         .mtu_set = mlx5_dev_set_mtu,
 340         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
 341         .vlan_offload_set = mlx5_vlan_offload_set,
 342         .reta_update = mlx5_dev_rss_reta_update,
 343         .reta_query = mlx5_dev_rss_reta_query,
 344         .rss_hash_update = mlx5_rss_hash_update,
 345         .rss_hash_conf_get = mlx5_rss_hash_conf_get,
 346         .filter_ctrl = mlx5_dev_filter_ctrl,
 347         .rx_descriptor_status = mlx5_rx_descriptor_status,
 348         .tx_descriptor_status = mlx5_tx_descriptor_status,
 349         .rx_queue_intr_enable = mlx5_rx_intr_enable,
 350         .rx_queue_intr_disable = mlx5_rx_intr_disable,
 351         .is_removed = mlx5_is_removed,
 352 };
 353
 354 static const struct eth_dev_ops mlx5_dev_sec_ops = {
 355         .stats_get = mlx5_stats_get,
 356         .stats_reset = mlx5_stats_reset,
 357         .xstats_get = mlx5_xstats_get,
 358         .xstats_reset = mlx5_xstats_reset,
 359         .xstats_get_names = mlx5_xstats_get_names,
 360         .dev_infos_get = mlx5_dev_infos_get,
 361         .rx_descriptor_status = mlx5_rx_descriptor_status,
 362         .tx_descriptor_status = mlx5_tx_descriptor_status,
 363 };
 364
 365 /* Available operators in flow isolated mode. */
 366 const struct eth_dev_ops mlx5_dev_ops_isolate = {
 367         .dev_configure = mlx5_dev_configure,
 368         .dev_start = mlx5_dev_start,
 369         .dev_stop = mlx5_dev_stop,
 370         .dev_set_link_down = mlx5_set_link_down,
 371         .dev_set_link_up = mlx5_set_link_up,
 372         .dev_close = mlx5_dev_close,
 373         .link_update = mlx5_link_update,
 374         .stats_get = mlx5_stats_get,
 375         .stats_reset = mlx5_stats_reset,
 376         .xstats_get = mlx5_xstats_get,
 377         .xstats_reset = mlx5_xstats_reset,
 378         .xstats_get_names = mlx5_xstats_get_names,
 379         .dev_infos_get = mlx5_dev_infos_get,
 380         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
 381         .vlan_filter_set = mlx5_vlan_filter_set,
 382         .rx_queue_setup = mlx5_rx_queue_setup,
 383         .tx_queue_setup = mlx5_tx_queue_setup,
 384         .rx_queue_release = mlx5_rx_queue_release,
 385         .tx_queue_release = mlx5_tx_queue_release,
 386         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
 387         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
 388         .mac_addr_remove = mlx5_mac_addr_remove,
 389         .mac_addr_add = mlx5_mac_addr_add,
 390         .mac_addr_set = mlx5_mac_addr_set,
 391         .set_mc_addr_list = mlx5_set_mc_addr_list,
 392         .mtu_set = mlx5_dev_set_mtu,
 393         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
 394         .vlan_offload_set = mlx5_vlan_offload_set,
 395         .filter_ctrl = mlx5_dev_filter_ctrl,
 396         .rx_descriptor_status = mlx5_rx_descriptor_status,
 397         .tx_descriptor_status = mlx5_tx_descriptor_status,
 398         .rx_queue_intr_enable = mlx5_rx_intr_enable,
 399         .rx_queue_intr_disable = mlx5_rx_intr_disable,
 400         .is_removed = mlx5_is_removed,
 401 };
 402
 403 /**
 404  * Verify and store value for device argument.
 405  *
 406  * @param[in] key
 407  *   Key argument to verify.
 408  * @param[in] val
 409  *   Value associated with key.
 410  * @param opaque
 411  *   User data.
 412  *
 413  * @return
 414  *   0 on success, a negative errno value otherwise and rte_errno is set.
 415  */
 416 static int
 417 mlx5_args_check(const char *key, const char *val, void *opaque)
 418 {
 419         struct mlx5_dev_config *config = opaque;
 420         unsigned long tmp;
 421
 422         errno = 0;
 423         tmp = strtoul(val, NULL, 0);
 424         if (errno) {
 425                 rte_errno = errno;
 426                 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
 427                 return -rte_errno;
 428         }
 429         if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
 430                 config->cqe_comp = !!tmp;
 431         } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
 432                 config->mprq.enabled = !!tmp;
 433         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
 434                 config->mprq.stride_num_n = tmp;
 435         } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
 436                 config->mprq.max_memcpy_len = tmp;
 437         } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
 438                 config->mprq.min_rxqs_num = tmp;
 439         } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
 440                 config->txq_inline = tmp;
 441         } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
 442                 config->txqs_inline = tmp;
 443         } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
 444                 config->mps = !!tmp ? config->mps : 0;
 445         } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
 446                 config->mpw_hdr_dseg = !!tmp;
 447         } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
 448                 config->inline_max_packet_sz = tmp;
 449         } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
 450                 config->tx_vec_en = !!tmp;
 451         } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
 452                 config->rx_vec_en = !!tmp;
 453         } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
 454                 config->l3_vxlan_en = !!tmp;
 455         } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
 456                 config->vf_nl_en = !!tmp;
 457         } else {
 458                 DRV_LOG(WARNING, "%s: unknown parameter", key);
 459                 rte_errno = EINVAL;
 460                 return -rte_errno;
 461         }
 462         return 0;
 463 }
 464
 465 /**
 466  * Parse device parameters.
 467  *
 468  * @param config
 469  *   Pointer to device configuration structure.
 470  * @param devargs
 471  *   Device arguments structure.
 472  *
 473  * @return
 474  *   0 on success, a negative errno value otherwise and rte_errno is set.
 475  */
 476 static int
 477 mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
 478 {
 479         const char **params = (const char *[]){
 480                 MLX5_RXQ_CQE_COMP_EN,
 481                 MLX5_RX_MPRQ_EN,
 482                 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
 483                 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
 484                 MLX5_RXQS_MIN_MPRQ,
 485                 MLX5_TXQ_INLINE,
 486                 MLX5_TXQS_MIN_INLINE,
 487                 MLX5_TXQ_MPW_EN,
 488                 MLX5_TXQ_MPW_HDR_DSEG_EN,
 489                 MLX5_TXQ_MAX_INLINE_LEN,
 490                 MLX5_TX_VEC_EN,
 491                 MLX5_RX_VEC_EN,
 492                 MLX5_L3_VXLAN_EN,
 493                 MLX5_VF_NL_EN,
 494                 NULL,
 495         };
 496         struct rte_kvargs *kvlist;
 497         int ret = 0;
 498         int i;
 499
 500         if (devargs == NULL)
 501                 return 0;
 502         /* Following UGLY cast is done to pass checkpatch. */
 503         kvlist = rte_kvargs_parse(devargs->args, params);
 504         if (kvlist == NULL)
 505                 return 0;
 506         /* Process parameters. */
 507         for (i = 0; (params[i] != NULL); ++i) {
 508                 if (rte_kvargs_count(kvlist, params[i])) {
 509                         ret = rte_kvargs_process(kvlist, params[i],
 510                                                  mlx5_args_check, config);
 511                         if (ret) {
 512                                 rte_errno = EINVAL;
 513                                 rte_kvargs_free(kvlist);
 514                                 return -rte_errno;
 515                         }
 516                 }
 517         }
 518         rte_kvargs_free(kvlist);
 519         return 0;
 520 }
 521
 522 static struct rte_pci_driver mlx5_driver;
 523
 524 /*
 525  * Reserved UAR address space for TXQ UAR(hw doorbell) mapping, process
 526  * local resource used by both primary and secondary to avoid duplicate
 527  * reservation.
 528  * The space has to be available on both primary and secondary process,
 529  * TXQ UAR maps to this area using fixed mmap w/o double check.
 530  */
 531 static void *uar_base;
 532
 533 static int
 534 find_lower_va_bound(const struct rte_memseg_list *msl __rte_unused,
 535                 const struct rte_memseg *ms, void *arg)
 536 {
 537         void **addr = arg;
 538
 539         if (*addr == NULL)
 540                 *addr = ms->addr;
 541         else
 542                 *addr = RTE_MIN(*addr, ms->addr);
 543
 544         return 0;
 545 }
 546
 547 /**
 548  * Reserve UAR address space for primary process.
 549  *
 550  * @param[in] dev
 551  *   Pointer to Ethernet device.
 552  *
 553  * @return
 554  *   0 on success, a negative errno value otherwise and rte_errno is set.
 555  */
 556 static int
 557 mlx5_uar_init_primary(struct rte_eth_dev *dev)
 558 {
 559         struct priv *priv = dev->data->dev_private;
 560         void *addr = (void *)0;
 561
 562         if (uar_base) { /* UAR address space mapped. */
 563                 priv->uar_base = uar_base;
 564                 return 0;
 565         }
 566         /* find out lower bound of hugepage segments */
 567         rte_memseg_walk(find_lower_va_bound, &addr);
 568
 569         /* keep distance to hugepages to minimize potential conflicts. */
 570         addr = RTE_PTR_SUB(addr, MLX5_UAR_OFFSET + MLX5_UAR_SIZE);
 571         /* anonymous mmap, no real memory consumption. */
 572         addr = mmap(addr, MLX5_UAR_SIZE,
 573                     PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
 574         if (addr == MAP_FAILED) {
 575                 DRV_LOG(ERR,
 576                         "port %u failed to reserve UAR address space, please"
 577                         " adjust MLX5_UAR_SIZE or try --base-virtaddr",
 578                         dev->data->port_id);
 579                 rte_errno = ENOMEM;
 580                 return -rte_errno;
 581         }
 582         /* Accept either same addr or a new addr returned from mmap if target
 583          * range occupied.
 584          */
 585         DRV_LOG(INFO, "port %u reserved UAR address space: %p",
 586                 dev->data->port_id, addr);
 587         priv->uar_base = addr; /* for primary and secondary UAR re-mmap. */
 588         uar_base = addr; /* process local, don't reserve again. */
 589         return 0;
 590 }
 591
 592 /**
 593  * Reserve UAR address space for secondary process, align with
 594  * primary process.
 595  *
 596  * @param[in] dev
 597  *   Pointer to Ethernet device.
 598  *
 599  * @return
 600  *   0 on success, a negative errno value otherwise and rte_errno is set.
 601  */
 602 static int
 603 mlx5_uar_init_secondary(struct rte_eth_dev *dev)
 604 {
 605         struct priv *priv = dev->data->dev_private;
 606         void *addr;
 607
 608         assert(priv->uar_base);
 609         if (uar_base) { /* already reserved. */
 610                 assert(uar_base == priv->uar_base);
 611                 return 0;
 612         }
 613         /* anonymous mmap, no real memory consumption. */
 614         addr = mmap(priv->uar_base, MLX5_UAR_SIZE,
 615                     PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
 616         if (addr == MAP_FAILED) {
 617                 DRV_LOG(ERR, "port %u UAR mmap failed: %p size: %llu",
 618                         dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
 619                 rte_errno = ENXIO;
 620                 return -rte_errno;
 621         }
 622         if (priv->uar_base != addr) {
 623                 DRV_LOG(ERR,
 624                         "port %u UAR address %p size %llu occupied, please"
 625                         " adjust MLX5_UAR_OFFSET or try EAL parameter"
 626                         " --base-virtaddr",
 627                         dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
 628                 rte_errno = ENXIO;
 629                 return -rte_errno;
 630         }
 631         uar_base = addr; /* process local, don't reserve again */
 632         DRV_LOG(INFO, "port %u reserved UAR address space: %p",
 633                 dev->data->port_id, addr);
 634         return 0;
 635 }
 636
 637 /**
 638  * DPDK callback to register a PCI device.
 639  *
 640  * This function creates an Ethernet device for each port of a given
 641  * PCI device.
 642  *
 643  * @param[in] pci_drv
 644  *   PCI driver structure (mlx5_driver).
 645  * @param[in] pci_dev
 646  *   PCI device information.
 647  *
 648  * @return
 649  *   0 on success, a negative errno value otherwise and rte_errno is set.
 650  */
 651 static int
 652 mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 653                struct rte_pci_device *pci_dev)
 654 {
 655         struct ibv_device **list = NULL;
 656         struct ibv_device *ibv_dev;
 657         int err = 0;
 658         struct ibv_context *attr_ctx = NULL;
 659         struct ibv_device_attr_ex device_attr;
 660         unsigned int vf = 0;
 661         unsigned int mps;
 662         unsigned int cqe_comp;
 663         unsigned int tunnel_en = 0;
 664         unsigned int mpls_en = 0;
 665         unsigned int swp = 0;
 666         unsigned int verb_priorities = 0;
 667         unsigned int mprq = 0;
 668         unsigned int mprq_min_stride_size_n = 0;
 669         unsigned int mprq_max_stride_size_n = 0;
 670         unsigned int mprq_min_stride_num_n = 0;
 671         unsigned int mprq_max_stride_num_n = 0;
 672         int i;
 673         struct mlx5dv_context attrs_out = {0};
 674 #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
 675         struct ibv_counter_set_description cs_desc;
 676 #endif
 677
 678         /* Prepare shared data between primary and secondary process. */
 679         mlx5_prepare_shared_data();
 680         assert(pci_drv == &mlx5_driver);
 681         list = mlx5_glue->get_device_list(&i);
 682         if (list == NULL) {
 683                 assert(errno);
 684                 err = errno;
 685                 if (errno == ENOSYS)
 686                         DRV_LOG(ERR,
 687                                 "cannot list devices, is ib_uverbs loaded?");
 688                 goto error;
 689         }
 690         assert(i >= 0);
 691         /*
 692          * For each listed device, check related sysfs entry against
 693          * the provided PCI ID.
 694          */
 695         while (i != 0) {
 696                 struct rte_pci_addr pci_addr;
 697
 698                 --i;
 699                 DRV_LOG(DEBUG, "checking device \"%s\"", list[i]->name);
 700                 if (mlx5_ibv_device_to_pci_addr(list[i], &pci_addr))
 701                         continue;
 702                 if ((pci_dev->addr.domain != pci_addr.domain) ||
 703                     (pci_dev->addr.bus != pci_addr.bus) ||
 704                     (pci_dev->addr.devid != pci_addr.devid) ||
 705                     (pci_dev->addr.function != pci_addr.function))
 706                         continue;
 707                 DRV_LOG(INFO, "PCI information matches, using device \"%s\"",
 708                         list[i]->name);
 709                 vf = ((pci_dev->id.device_id ==
 710                        PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) ||
 711                       (pci_dev->id.device_id ==
 712                        PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) ||
 713                       (pci_dev->id.device_id ==
 714                        PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) ||
 715                       (pci_dev->id.device_id ==
 716                        PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF));
 717                 attr_ctx = mlx5_glue->open_device(list[i]);
 718                 rte_errno = errno;
 719                 err = rte_errno;
 720                 break;
 721         }
 722         if (attr_ctx == NULL) {
 723                 switch (err) {
 724                 case 0:
 725                         DRV_LOG(ERR,
 726                                 "cannot access device, is mlx5_ib loaded?");
 727                         err = ENODEV;
 728                         break;
 729                 case EINVAL:
 730                         DRV_LOG(ERR,
 731                                 "cannot use device, are drivers up to date?");
 732                         break;
 733                 }
 734                 goto error;
 735         }
 736         ibv_dev = list[i];
 737         DRV_LOG(DEBUG, "device opened");
 738 #ifdef HAVE_IBV_MLX5_MOD_SWP
 739         attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
 740 #endif
 741         /*
 742          * Multi-packet send is supported by ConnectX-4 Lx PF as well
 743          * as all ConnectX-5 devices.
 744          */
 745 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 746         attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
 747 #endif
 748 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
 749         attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
 750 #endif
 751         mlx5_glue->dv_query_device(attr_ctx, &attrs_out);
 752         if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
 753                 if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
 754                         DRV_LOG(DEBUG, "enhanced MPW is supported");
 755                         mps = MLX5_MPW_ENHANCED;
 756                 } else {
 757                         DRV_LOG(DEBUG, "MPW is supported");
 758                         mps = MLX5_MPW;
 759                 }
 760         } else {
 761                 DRV_LOG(DEBUG, "MPW isn't supported");
 762                 mps = MLX5_MPW_DISABLED;
 763         }
 764 #ifdef HAVE_IBV_MLX5_MOD_SWP
 765         if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
 766                 swp = attrs_out.sw_parsing_caps.sw_parsing_offloads;
 767         DRV_LOG(DEBUG, "SWP support: %u", swp);
 768 #endif
 769 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
 770         if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
 771                 struct mlx5dv_striding_rq_caps mprq_caps =
 772                         attrs_out.striding_rq_caps;
 773
 774                 DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
 775                         mprq_caps.min_single_stride_log_num_of_bytes);
 776                 DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
 777                         mprq_caps.max_single_stride_log_num_of_bytes);
 778                 DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
 779                         mprq_caps.min_single_wqe_log_num_of_strides);
 780                 DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
 781                         mprq_caps.max_single_wqe_log_num_of_strides);
 782                 DRV_LOG(DEBUG, "\tsupported_qpts: %d",
 783                         mprq_caps.supported_qpts);
 784                 DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
 785                 mprq = 1;
 786                 mprq_min_stride_size_n =
 787                         mprq_caps.min_single_stride_log_num_of_bytes;
 788                 mprq_max_stride_size_n =
 789                         mprq_caps.max_single_stride_log_num_of_bytes;
 790                 mprq_min_stride_num_n =
 791                         mprq_caps.min_single_wqe_log_num_of_strides;
 792                 mprq_max_stride_num_n =
 793                         mprq_caps.max_single_wqe_log_num_of_strides;
 794         }
 795 #endif
 796         if (RTE_CACHE_LINE_SIZE == 128 &&
 797             !(attrs_out.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
 798                 cqe_comp = 0;
 799         else
 800                 cqe_comp = 1;
 801 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 802         if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
 803                 tunnel_en = ((attrs_out.tunnel_offloads_caps &
 804                               MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
 805                              (attrs_out.tunnel_offloads_caps &
 806                               MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
 807         }
 808         DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
 809                 tunnel_en ? "" : "not ");
 810 #else
 811         DRV_LOG(WARNING,
 812                 "tunnel offloading disabled due to old OFED/rdma-core version");
 813 #endif
 814 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
 815         mpls_en = ((attrs_out.tunnel_offloads_caps &
 816                     MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
 817                    (attrs_out.tunnel_offloads_caps &
 818                     MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
 819         DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
 820                 mpls_en ? "" : "not ");
 821 #else
 822         DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
 823                 " old OFED/rdma-core version or firmware configuration");
 824 #endif
 825         err = mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr);
 826         if (err) {
 827                 DEBUG("ibv_query_device_ex() failed");
 828                 goto error;
 829         }
 830         DRV_LOG(INFO, "%u port(s) detected",
 831                 device_attr.orig_attr.phys_port_cnt);
 832         for (i = 0; i < device_attr.orig_attr.phys_port_cnt; i++) {
 833                 char name[RTE_ETH_NAME_MAX_LEN];
 834                 int len;
 835                 uint32_t port = i + 1; /* ports are indexed from one */
 836                 struct ibv_context *ctx = NULL;
 837                 struct ibv_port_attr port_attr;
 838                 struct ibv_pd *pd = NULL;
 839                 struct priv *priv = NULL;
 840                 struct rte_eth_dev *eth_dev = NULL;
 841                 struct ibv_device_attr_ex device_attr_ex;
 842                 struct ether_addr mac;
 843                 struct mlx5_dev_config config = {
 844                         .cqe_comp = cqe_comp,
 845                         .mps = mps,
 846                         .tunnel_en = tunnel_en,
 847                         .mpls_en = mpls_en,
 848                         .tx_vec_en = 1,
 849                         .rx_vec_en = 1,
 850                         .mpw_hdr_dseg = 0,
 851                         .txq_inline = MLX5_ARG_UNSET,
 852                         .txqs_inline = MLX5_ARG_UNSET,
 853                         .inline_max_packet_sz = MLX5_ARG_UNSET,
 854                         .vf_nl_en = 1,
 855                         .swp = !!swp,
 856                         .mprq = {
 857                                 .enabled = 0, /* Disabled by default. */
 858                                 .stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
 859                                                         mprq_min_stride_num_n),
 860                                 .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
 861                                 .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
 862                         },
 863                 };
 864
 865                 len = snprintf(name, sizeof(name), PCI_PRI_FMT,
 866                          pci_dev->addr.domain, pci_dev->addr.bus,
 867                          pci_dev->addr.devid, pci_dev->addr.function);
 868                 if (device_attr.orig_attr.phys_port_cnt > 1)
 869                         snprintf(name + len, sizeof(name), " port %u", i);
 870                 if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
 871                         eth_dev = rte_eth_dev_attach_secondary(name);
 872                         if (eth_dev == NULL) {
 873                                 DRV_LOG(ERR, "can not attach rte ethdev");
 874                                 rte_errno = ENOMEM;
 875                                 err = rte_errno;
 876                                 goto error;
 877                         }
 878                         eth_dev->device = &pci_dev->device;
 879                         eth_dev->dev_ops = &mlx5_dev_sec_ops;
 880                         err = mlx5_uar_init_secondary(eth_dev);
 881                         if (err) {
 882                                 err = rte_errno;
 883                                 goto error;
 884                         }
 885                         /* Receive command fd from primary process */
 886                         err = mlx5_socket_connect(eth_dev);
 887                         if (err < 0) {
 888                                 err = rte_errno;
 889                                 goto error;
 890                         }
 891                         /* Remap UAR for Tx queues. */
 892                         err = mlx5_tx_uar_remap(eth_dev, err);
 893                         if (err) {
 894                                 err = rte_errno;
 895                                 goto error;
 896                         }
 897                         /*
 898                          * Ethdev pointer is still required as input since
 899                          * the primary device is not accessible from the
 900                          * secondary process.
 901                          */
 902                         eth_dev->rx_pkt_burst =
 903                                 mlx5_select_rx_function(eth_dev);
 904                         eth_dev->tx_pkt_burst =
 905                                 mlx5_select_tx_function(eth_dev);
 906                         rte_eth_dev_probing_finish(eth_dev);
 907                         continue;
 908                 }
 909                 DRV_LOG(DEBUG, "using port %u", port);
 910                 ctx = mlx5_glue->open_device(ibv_dev);
 911                 if (ctx == NULL) {
 912                         err = ENODEV;
 913                         goto port_error;
 914                 }
 915                 /* Check port status. */
 916                 err = mlx5_glue->query_port(ctx, port, &port_attr);
 917                 if (err) {
 918                         DRV_LOG(ERR, "port query failed: %s", strerror(err));
 919                         goto port_error;
 920                 }
 921                 if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
 922                         DRV_LOG(ERR,
 923                                 "port %d is not configured in Ethernet mode",
 924                                 port);
 925                         err = EINVAL;
 926                         goto port_error;
 927                 }
 928                 if (port_attr.state != IBV_PORT_ACTIVE)
 929                         DRV_LOG(DEBUG, "port %d is not active: \"%s\" (%d)",
 930                                 port,
 931                                 mlx5_glue->port_state_str(port_attr.state),
 932                                 port_attr.state);
 933                 /* Allocate protection domain. */
 934                 pd = mlx5_glue->alloc_pd(ctx);
 935                 if (pd == NULL) {
 936                         DRV_LOG(ERR, "PD allocation failure");
 937                         err = ENOMEM;
 938                         goto port_error;
 939                 }
 940                 /* from rte_ethdev.c */
 941                 priv = rte_zmalloc("ethdev private structure",
 942                                    sizeof(*priv),
 943                                    RTE_CACHE_LINE_SIZE);
 944                 if (priv == NULL) {
 945                         DRV_LOG(ERR, "priv allocation failure");
 946                         err = ENOMEM;
 947                         goto port_error;
 948                 }
 949                 priv->ctx = ctx;
 950                 strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
 951                         sizeof(priv->ibdev_path));
 952                 priv->device_attr = device_attr;
 953                 priv->port = port;
 954                 priv->pd = pd;
 955                 priv->mtu = ETHER_MTU;
 956                 err = mlx5_args(&config, pci_dev->device.devargs);
 957                 if (err) {
 958                         DRV_LOG(ERR, "failed to process device arguments: %s",
 959                                 strerror(err));
 960                         err = rte_errno;
 961                         goto port_error;
 962                 }
 963                 err = mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex);
 964                 if (err) {
 965                         DRV_LOG(ERR, "ibv_query_device_ex() failed");
 966                         goto port_error;
 967                 }
 968                 config.hw_csum = !!(device_attr_ex.device_cap_flags_ex &
 969                                     IBV_DEVICE_RAW_IP_CSUM);
 970                 DRV_LOG(DEBUG, "checksum offloading is %ssupported",
 971                         (config.hw_csum ? "" : "not "));
 972 #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
 973                 config.flow_counter_en = !!(device_attr.max_counter_sets);
 974                 mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
 975                 DRV_LOG(DEBUG,
 976                         "counter type = %d, num of cs = %ld, attributes = %d",
 977                         cs_desc.counter_type, cs_desc.num_of_cs,
 978                         cs_desc.attributes);
 979 #endif
 980                 config.ind_table_max_size =
 981                         device_attr_ex.rss_caps.max_rwq_indirection_table_size;
 982                 /* Remove this check once DPDK supports larger/variable
 983                  * indirection tables. */
 984                 if (config.ind_table_max_size >
 985                                 (unsigned int)ETH_RSS_RETA_SIZE_512)
 986                         config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
 987                 DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
 988                         config.ind_table_max_size);
 989                 config.hw_vlan_strip = !!(device_attr_ex.raw_packet_caps &
 990                                          IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
 991                 DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
 992                         (config.hw_vlan_strip ? "" : "not "));
 993
 994                 config.hw_fcs_strip = !!(device_attr_ex.raw_packet_caps &
 995                                          IBV_RAW_PACKET_CAP_SCATTER_FCS);
 996                 DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
 997                         (config.hw_fcs_strip ? "" : "not "));
 998
 999 #ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING
1000                 config.hw_padding = !!device_attr_ex.rx_pad_end_addr_align;
1001 #endif
1002                 DRV_LOG(DEBUG,
1003                         "hardware Rx end alignment padding is %ssupported",
1004                         (config.hw_padding ? "" : "not "));
1005                 config.vf = vf;
1006                 config.tso = ((device_attr_ex.tso_caps.max_tso > 0) &&
1007                               (device_attr_ex.tso_caps.supported_qpts &
1008                               (1 << IBV_QPT_RAW_PACKET)));
1009                 if (config.tso)
1010                         config.tso_max_payload_sz =
1011                                         device_attr_ex.tso_caps.max_tso;
1012                 if (config.mps && !mps) {
1013                         DRV_LOG(ERR,
1014                                 "multi-packet send not supported on this device"
1015                                 " (" MLX5_TXQ_MPW_EN ")");
1016                         err = ENOTSUP;
1017                         goto port_error;
1018                 }
1019                 DRV_LOG(INFO, "%s MPS is %s",
1020                         config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
1021                         config.mps != MLX5_MPW_DISABLED ? "enabled" :
1022                         "disabled");
1023                 if (config.cqe_comp && !cqe_comp) {
1024                         DRV_LOG(WARNING, "Rx CQE compression isn't supported");
1025                         config.cqe_comp = 0;
1026                 }
1027                 config.mprq.enabled = config.mprq.enabled && mprq;
1028                 if (config.mprq.enabled) {
1029                         if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
1030                             config.mprq.stride_num_n < mprq_min_stride_num_n) {
1031                                 config.mprq.stride_num_n =
1032                                         RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
1033                                                 mprq_min_stride_num_n);
1034                                 DRV_LOG(WARNING,
1035                                         "the number of strides"
1036                                         " for Multi-Packet RQ is out of range,"
1037                                         " setting default value (%u)",
1038                                         1 << config.mprq.stride_num_n);
1039                         }
1040                         config.mprq.min_stride_size_n = mprq_min_stride_size_n;
1041                         config.mprq.max_stride_size_n = mprq_max_stride_size_n;
1042                 }
1043                 eth_dev = rte_eth_dev_allocate(name);
1044                 if (eth_dev == NULL) {
1045                         DRV_LOG(ERR, "can not allocate rte ethdev");
1046                         err = ENOMEM;
1047                         goto port_error;
1048                 }
1049                 eth_dev->data->dev_private = priv;
1050                 priv->dev_data = eth_dev->data;
1051                 eth_dev->data->mac_addrs = priv->mac;
1052                 eth_dev->device = &pci_dev->device;
1053                 rte_eth_copy_pci_info(eth_dev, pci_dev);
1054                 eth_dev->device->driver = &mlx5_driver.driver;
1055                 err = mlx5_uar_init_primary(eth_dev);
1056                 if (err) {
1057                         err = rte_errno;
1058                         goto port_error;
1059                 }
1060                 /* Configure the first MAC address by default. */
1061                 if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
1062                         DRV_LOG(ERR,
1063                                 "port %u cannot get MAC address, is mlx5_en"
1064                                 " loaded? (errno: %s)",
1065                                 eth_dev->data->port_id, strerror(rte_errno));
1066                         err = ENODEV;
1067                         goto port_error;
1068                 }
1069                 DRV_LOG(INFO,
1070                         "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
1071                         eth_dev->data->port_id,
1072                         mac.addr_bytes[0], mac.addr_bytes[1],
1073                         mac.addr_bytes[2], mac.addr_bytes[3],
1074                         mac.addr_bytes[4], mac.addr_bytes[5]);
1075 #ifndef NDEBUG
1076                 {
1077                         char ifname[IF_NAMESIZE];
1078
1079                         if (mlx5_get_ifname(eth_dev, &ifname) == 0)
1080                                 DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
1081                                         eth_dev->data->port_id, ifname);
1082                         else
1083                                 DRV_LOG(DEBUG, "port %u ifname is unknown",
1084                                         eth_dev->data->port_id);
1085                 }
1086 #endif
1087                 /* Get actual MTU if possible. */
1088                 err = mlx5_get_mtu(eth_dev, &priv->mtu);
1089                 if (err) {
1090                         err = rte_errno;
1091                         goto port_error;
1092                 }
1093                 DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
1094                         priv->mtu);
1095                 /*
1096                  * Initialize burst functions to prevent crashes before link-up.
1097                  */
1098                 eth_dev->rx_pkt_burst = removed_rx_burst;
1099                 eth_dev->tx_pkt_burst = removed_tx_burst;
1100                 eth_dev->dev_ops = &mlx5_dev_ops;
1101                 /* Register MAC address. */
1102                 claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
1103                 priv->nl_socket = -1;
1104                 priv->nl_sn = 0;
1105                 if (vf && config.vf_nl_en) {
1106                         priv->nl_socket = mlx5_nl_init(RTMGRP_LINK);
1107                         if (priv->nl_socket < 0)
1108                                 priv->nl_socket = -1;
1109                         mlx5_nl_mac_addr_sync(eth_dev);
1110                 }
1111                 TAILQ_INIT(&priv->flows);
1112                 TAILQ_INIT(&priv->ctrl_flows);
1113                 /* Hint libmlx5 to use PMD allocator for data plane resources */
1114                 struct mlx5dv_ctx_allocators alctr = {
1115                         .alloc = &mlx5_alloc_verbs_buf,
1116                         .free = &mlx5_free_verbs_buf,
1117                         .data = priv,
1118                 };
1119                 mlx5_glue->dv_set_context_attr(ctx,
1120                                                MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
1121                                                (void *)((uintptr_t)&alctr));
1122                 /* Bring Ethernet device up. */
1123                 DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
1124                         eth_dev->data->port_id);
1125                 mlx5_set_link_up(eth_dev);
1126                 /*
1127                  * Even though the interrupt handler is not installed yet,
1128                  * interrupts will still trigger on the asyn_fd from
1129                  * Verbs context returned by ibv_open_device().
1130                  */
1131                 mlx5_link_update(eth_dev, 0);
1132                 /* Store device configuration on private structure. */
1133                 priv->config = config;
1134                 /* Create drop queue. */
1135                 err = mlx5_flow_create_drop_queue(eth_dev);
1136                 if (err) {
1137                         DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
1138                                 eth_dev->data->port_id, strerror(rte_errno));
1139                         err = rte_errno;
1140                         goto port_error;
1141                 }
1142                 /* Supported Verbs flow priority number detection. */
1143                 if (verb_priorities == 0)
1144                         verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
1145                 if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
1146                         DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
1147                                 eth_dev->data->port_id, verb_priorities);
1148                         err = ENOTSUP;
1149                         goto port_error;
1150                 }
1151                 priv->config.max_verbs_prio = verb_priorities;
1152                 /*
1153                  * Once the device is added to the list of memory event
1154                  * callback, its global MR cache table cannot be expanded
1155                  * on the fly because of deadlock. If it overflows, lookup
1156                  * should be done by searching MR list linearly, which is slow.
1157                  */
1158                 err = mlx5_mr_btree_init(&priv->mr.cache,
1159                                          MLX5_MR_BTREE_CACHE_N * 2,
1160                                          eth_dev->device->numa_node);
1161                 if (err) {
1162                         err = rte_errno;
1163                         goto port_error;
1164                 }
1165                 /* Add device to memory callback list. */
1166                 rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1167                 LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
1168                                  priv, mem_event_cb);
1169                 rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1170                 rte_eth_dev_probing_finish(eth_dev);
1171                 continue;
1172 port_error:
1173                 if (priv)
1174                         rte_free(priv);
1175                 if (pd)
1176                         claim_zero(mlx5_glue->dealloc_pd(pd));
1177                 if (ctx)
1178                         claim_zero(mlx5_glue->close_device(ctx));
1179                 if (eth_dev && rte_eal_process_type() == RTE_PROC_PRIMARY)
1180                         rte_eth_dev_release_port(eth_dev);
1181                 break;
1182         }
1183         /*
1184          * XXX if something went wrong in the loop above, there is a resource
1185          * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
1186          * long as the dpdk does not provide a way to deallocate a ethdev and a
1187          * way to enumerate the registered ethdevs to free the previous ones.
1188          */
1189 error:
1190         if (attr_ctx)
1191                 claim_zero(mlx5_glue->close_device(attr_ctx));
1192         if (list)
1193                 mlx5_glue->free_device_list(list);
1194         if (err) {
1195                 rte_errno = err;
1196                 return -rte_errno;
1197         }
1198         return 0;
1199 }
1200
1201 static const struct rte_pci_id mlx5_pci_id_map[] = {
1202         {
1203                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1204                                PCI_DEVICE_ID_MELLANOX_CONNECTX4)
1205         },
1206         {
1207                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1208                                PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
1209         },
1210         {
1211                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1212                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
1213         },
1214         {
1215                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1216                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
1217         },
1218         {
1219                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1220                                PCI_DEVICE_ID_MELLANOX_CONNECTX5)
1221         },
1222         {
1223                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1224                                PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
1225         },
1226         {
1227                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1228                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
1229         },
1230         {
1231                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1232                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
1233         },
1234         {
1235                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1236                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
1237         },
1238         {
1239                 .vendor_id = 0
1240         }
1241 };
1242
1243 static struct rte_pci_driver mlx5_driver = {
1244         .driver = {
1245                 .name = MLX5_DRIVER_NAME
1246         },
1247         .id_table = mlx5_pci_id_map,
1248         .probe = mlx5_pci_probe,
1249         .drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV,
1250 };
1251
1252 #ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
1253
1254 /**
1255  * Suffix RTE_EAL_PMD_PATH with "-glue".
1256  *
1257  * This function performs a sanity check on RTE_EAL_PMD_PATH before
1258  * suffixing its last component.
1259  *
1260  * @param buf[out]
1261  *   Output buffer, should be large enough otherwise NULL is returned.
1262  * @param size
1263  *   Size of @p out.
1264  *
1265  * @return
1266  *   Pointer to @p buf or @p NULL in case suffix cannot be appended.
1267  */
1268 static char *
1269 mlx5_glue_path(char *buf, size_t size)
1270 {
1271         static const char *const bad[] = { "/", ".", "..", NULL };
1272         const char *path = RTE_EAL_PMD_PATH;
1273         size_t len = strlen(path);
1274         size_t off;
1275         int i;
1276
1277         while (len && path[len - 1] == '/')
1278                 --len;
1279         for (off = len; off && path[off - 1] != '/'; --off)
1280                 ;
1281         for (i = 0; bad[i]; ++i)
1282                 if (!strncmp(path + off, bad[i], (int)(len - off)))
1283                         goto error;
1284         i = snprintf(buf, size, "%.*s-glue", (int)len, path);
1285         if (i == -1 || (size_t)i >= size)
1286                 goto error;
1287         return buf;
1288 error:
1289         DRV_LOG(ERR,
1290                 "unable to append \"-glue\" to last component of"
1291                 " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
1292                 " please re-configure DPDK");
1293         return NULL;
1294 }
1295
1296 /**
1297  * Initialization routine for run-time dependency on rdma-core.
1298  */
1299 static int
1300 mlx5_glue_init(void)
1301 {
1302         char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
1303         const char *path[] = {
1304                 /*
1305                  * A basic security check is necessary before trusting
1306                  * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
1307                  */
1308                 (geteuid() == getuid() && getegid() == getgid() ?
1309                  getenv("MLX5_GLUE_PATH") : NULL),
1310                 /*
1311                  * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
1312                  * variant, otherwise let dlopen() look up libraries on its
1313                  * own.
1314                  */
1315                 (*RTE_EAL_PMD_PATH ?
1316                  mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
1317         };
1318         unsigned int i = 0;
1319         void *handle = NULL;
1320         void **sym;
1321         const char *dlmsg;
1322
1323         while (!handle && i != RTE_DIM(path)) {
1324                 const char *end;
1325                 size_t len;
1326                 int ret;
1327
1328                 if (!path[i]) {
1329                         ++i;
1330                         continue;
1331                 }
1332                 end = strpbrk(path[i], ":;");
1333                 if (!end)
1334                         end = path[i] + strlen(path[i]);
1335                 len = end - path[i];
1336                 ret = 0;
1337                 do {
1338                         char name[ret + 1];
1339
1340                         ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
1341                                        (int)len, path[i],
1342                                        (!len || *(end - 1) == '/') ? "" : "/");
1343                         if (ret == -1)
1344                                 break;
1345                         if (sizeof(name) != (size_t)ret + 1)
1346                                 continue;
1347                         DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
1348                                 name);
1349                         handle = dlopen(name, RTLD_LAZY);
1350                         break;
1351                 } while (1);
1352                 path[i] = end + 1;
1353                 if (!*end)
1354                         ++i;
1355         }
1356         if (!handle) {
1357                 rte_errno = EINVAL;
1358                 dlmsg = dlerror();
1359                 if (dlmsg)
1360                         DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
1361                 goto glue_error;
1362         }
1363         sym = dlsym(handle, "mlx5_glue");
1364         if (!sym || !*sym) {
1365                 rte_errno = EINVAL;
1366                 dlmsg = dlerror();
1367                 if (dlmsg)
1368                         DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
1369                 goto glue_error;
1370         }
1371         mlx5_glue = *sym;
1372         return 0;
1373 glue_error:
1374         if (handle)
1375                 dlclose(handle);
1376         DRV_LOG(WARNING,
1377                 "cannot initialize PMD due to missing run-time dependency on"
1378                 " rdma-core libraries (libibverbs, libmlx5)");
1379         return -rte_errno;
1380 }
1381
1382 #endif
1383
1384 /**
1385  * Driver initialization routine.
1386  */
1387 RTE_INIT(rte_mlx5_pmd_init);
1388 static void
1389 rte_mlx5_pmd_init(void)
1390 {
1391         /* Build the static tables for Verbs conversion. */
1392         mlx5_set_ptype_table();
1393         mlx5_set_cksum_table();
1394         mlx5_set_swp_types_table();
1395         /*
1396          * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
1397          * huge pages. Calling ibv_fork_init() during init allows
1398          * applications to use fork() safely for purposes other than
1399          * using this PMD, which is not supported in forked processes.
1400          */
1401         setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
1402         /* Match the size of Rx completion entry to the size of a cacheline. */
1403         if (RTE_CACHE_LINE_SIZE == 128)
1404                 setenv("MLX5_CQE_SIZE", "128", 0);
1405 #ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
1406         if (mlx5_glue_init())
1407                 return;
1408         assert(mlx5_glue);
1409 #endif
1410 #ifndef NDEBUG
1411         /* Glue structure must not contain any NULL pointers. */
1412         {
1413                 unsigned int i;
1414
1415                 for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
1416                         assert(((const void *const *)mlx5_glue)[i]);
1417         }
1418 #endif
1419         if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
1420                 DRV_LOG(ERR,
1421                         "rdma-core glue \"%s\" mismatch: \"%s\" is required",
1422                         mlx5_glue->version, MLX5_GLUE_VERSION);
1423                 return;
1424         }
1425         mlx5_glue->fork_init();
1426         rte_pci_register(&mlx5_driver);
1427 }
1428
1429 RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
1430 RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
1431 RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");
1432
1433 /** Initialize driver log type. */
1434 RTE_INIT(vdev_netvsc_init_log)
1435 {
1436         mlx5_logtype = rte_log_register("pmd.net.mlx5");
1437         if (mlx5_logtype >= 0)
1438                 rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE);
1439 }