drivers/net/mlx5/mlx5_ethdev.c

   1 /*-
   2  *   BSD LICENSE
   3  *
   4  *   Copyright 2015 6WIND S.A.
   5  *   Copyright 2015 Mellanox.
   6  *
   7  *   Redistribution and use in source and binary forms, with or without
   8  *   modification, are permitted provided that the following conditions
   9  *   are met:
  10  *
  11  *     * Redistributions of source code must retain the above copyright
  12  *       notice, this list of conditions and the following disclaimer.
  13  *     * Redistributions in binary form must reproduce the above copyright
  14  *       notice, this list of conditions and the following disclaimer in
  15  *       the documentation and/or other materials provided with the
  16  *       distribution.
  17  *     * Neither the name of 6WIND S.A. nor the names of its
  18  *       contributors may be used to endorse or promote products derived
  19  *       from this software without specific prior written permission.
  20  *
  21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  */
  33
  34 #include <stddef.h>
  35 #include <assert.h>
  36 #include <unistd.h>
  37 #include <stdint.h>
  38 #include <stdio.h>
  39 #include <string.h>
  40 #include <stdlib.h>
  41 #include <errno.h>
  42 #include <dirent.h>
  43 #include <net/if.h>
  44 #include <sys/ioctl.h>
  45 #include <sys/socket.h>
  46 #include <netinet/in.h>
  47 #include <linux/ethtool.h>
  48 #include <linux/sockios.h>
  49 #include <fcntl.h>
  50
  51 /* DPDK headers don't like -pedantic. */
  52 #ifdef PEDANTIC
  53 #pragma GCC diagnostic ignored "-Wpedantic"
  54 #endif
  55 #include <rte_atomic.h>
  56 #include <rte_ethdev.h>
  57 #include <rte_mbuf.h>
  58 #include <rte_common.h>
  59 #include <rte_interrupts.h>
  60 #include <rte_alarm.h>
  61 #include <rte_malloc.h>
  62 #ifdef PEDANTIC
  63 #pragma GCC diagnostic error "-Wpedantic"
  64 #endif
  65
  66 #include "mlx5.h"
  67 #include "mlx5_rxtx.h"
  68 #include "mlx5_utils.h"
  69
  70 /**
  71  * Return private structure associated with an Ethernet device.
  72  *
  73  * @param dev
  74  *   Pointer to Ethernet device structure.
  75  *
  76  * @return
  77  *   Pointer to private structure.
  78  */
  79 struct priv *
  80 mlx5_get_priv(struct rte_eth_dev *dev)
  81 {
  82         struct mlx5_secondary_data *sd;
  83
  84         if (!mlx5_is_secondary())
  85                 return dev->data->dev_private;
  86         sd = &mlx5_secondary_data[dev->data->port_id];
  87         return sd->data.dev_private;
  88 }
  89
  90 /**
  91  * Check if running as a secondary process.
  92  *
  93  * @return
  94  *   Nonzero if running as a secondary process.
  95  */
  96 inline int
  97 mlx5_is_secondary(void)
  98 {
  99         return rte_eal_process_type() != RTE_PROC_PRIMARY;
 100 }
 101
 102 /**
 103  * Get interface name from private structure.
 104  *
 105  * @param[in] priv
 106  *   Pointer to private structure.
 107  * @param[out] ifname
 108  *   Interface name output buffer.
 109  *
 110  * @return
 111  *   0 on success, -1 on failure and errno is set.
 112  */
 113 int
 114 priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
 115 {
 116         DIR *dir;
 117         struct dirent *dent;
 118         unsigned int dev_type = 0;
 119         unsigned int dev_port_prev = ~0u;
 120         char match[IF_NAMESIZE] = "";
 121
 122         {
 123                 MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
 124
 125                 dir = opendir(path);
 126                 if (dir == NULL)
 127                         return -1;
 128         }
 129         while ((dent = readdir(dir)) != NULL) {
 130                 char *name = dent->d_name;
 131                 FILE *file;
 132                 unsigned int dev_port;
 133                 int r;
 134
 135                 if ((name[0] == '.') &&
 136                     ((name[1] == '\0') ||
 137                      ((name[1] == '.') && (name[2] == '\0'))))
 138                         continue;
 139
 140                 MKSTR(path, "%s/device/net/%s/%s",
 141                       priv->ctx->device->ibdev_path, name,
 142                       (dev_type ? "dev_id" : "dev_port"));
 143
 144                 file = fopen(path, "rb");
 145                 if (file == NULL) {
 146                         if (errno != ENOENT)
 147                                 continue;
 148                         /*
 149                          * Switch to dev_id when dev_port does not exist as
 150                          * is the case with Linux kernel versions < 3.15.
 151                          */
 152 try_dev_id:
 153                         match[0] = '\0';
 154                         if (dev_type)
 155                                 break;
 156                         dev_type = 1;
 157                         dev_port_prev = ~0u;
 158                         rewinddir(dir);
 159                         continue;
 160                 }
 161                 r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
 162                 fclose(file);
 163                 if (r != 1)
 164                         continue;
 165                 /*
 166                  * Switch to dev_id when dev_port returns the same value for
 167                  * all ports. May happen when using a MOFED release older than
 168                  * 3.0 with a Linux kernel >= 3.15.
 169                  */
 170                 if (dev_port == dev_port_prev)
 171                         goto try_dev_id;
 172                 dev_port_prev = dev_port;
 173                 if (dev_port == (priv->port - 1u))
 174                         snprintf(match, sizeof(match), "%s", name);
 175         }
 176         closedir(dir);
 177         if (match[0] == '\0')
 178                 return -1;
 179         strncpy(*ifname, match, sizeof(*ifname));
 180         return 0;
 181 }
 182
 183 /**
 184  * Read from sysfs entry.
 185  *
 186  * @param[in] priv
 187  *   Pointer to private structure.
 188  * @param[in] entry
 189  *   Entry name relative to sysfs path.
 190  * @param[out] buf
 191  *   Data output buffer.
 192  * @param size
 193  *   Buffer size.
 194  *
 195  * @return
 196  *   0 on success, -1 on failure and errno is set.
 197  */
 198 static int
 199 priv_sysfs_read(const struct priv *priv, const char *entry,
 200                 char *buf, size_t size)
 201 {
 202         char ifname[IF_NAMESIZE];
 203         FILE *file;
 204         int ret;
 205         int err;
 206
 207         if (priv_get_ifname(priv, &ifname))
 208                 return -1;
 209
 210         MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
 211               ifname, entry);
 212
 213         file = fopen(path, "rb");
 214         if (file == NULL)
 215                 return -1;
 216         ret = fread(buf, 1, size, file);
 217         err = errno;
 218         if (((size_t)ret < size) && (ferror(file)))
 219                 ret = -1;
 220         else
 221                 ret = size;
 222         fclose(file);
 223         errno = err;
 224         return ret;
 225 }
 226
 227 /**
 228  * Write to sysfs entry.
 229  *
 230  * @param[in] priv
 231  *   Pointer to private structure.
 232  * @param[in] entry
 233  *   Entry name relative to sysfs path.
 234  * @param[in] buf
 235  *   Data buffer.
 236  * @param size
 237  *   Buffer size.
 238  *
 239  * @return
 240  *   0 on success, -1 on failure and errno is set.
 241  */
 242 static int
 243 priv_sysfs_write(const struct priv *priv, const char *entry,
 244                  char *buf, size_t size)
 245 {
 246         char ifname[IF_NAMESIZE];
 247         FILE *file;
 248         int ret;
 249         int err;
 250
 251         if (priv_get_ifname(priv, &ifname))
 252                 return -1;
 253
 254         MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
 255               ifname, entry);
 256
 257         file = fopen(path, "wb");
 258         if (file == NULL)
 259                 return -1;
 260         ret = fwrite(buf, 1, size, file);
 261         err = errno;
 262         if (((size_t)ret < size) || (ferror(file)))
 263                 ret = -1;
 264         else
 265                 ret = size;
 266         fclose(file);
 267         errno = err;
 268         return ret;
 269 }
 270
 271 /**
 272  * Get unsigned long sysfs property.
 273  *
 274  * @param priv
 275  *   Pointer to private structure.
 276  * @param[in] name
 277  *   Entry name relative to sysfs path.
 278  * @param[out] value
 279  *   Value output buffer.
 280  *
 281  * @return
 282  *   0 on success, -1 on failure and errno is set.
 283  */
 284 static int
 285 priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
 286 {
 287         int ret;
 288         unsigned long value_ret;
 289         char value_str[32];
 290
 291         ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
 292         if (ret == -1) {
 293                 DEBUG("cannot read %s value from sysfs: %s",
 294                       name, strerror(errno));
 295                 return -1;
 296         }
 297         value_str[ret] = '\0';
 298         errno = 0;
 299         value_ret = strtoul(value_str, NULL, 0);
 300         if (errno) {
 301                 DEBUG("invalid %s value `%s': %s", name, value_str,
 302                       strerror(errno));
 303                 return -1;
 304         }
 305         *value = value_ret;
 306         return 0;
 307 }
 308
 309 /**
 310  * Set unsigned long sysfs property.
 311  *
 312  * @param priv
 313  *   Pointer to private structure.
 314  * @param[in] name
 315  *   Entry name relative to sysfs path.
 316  * @param value
 317  *   Value to set.
 318  *
 319  * @return
 320  *   0 on success, -1 on failure and errno is set.
 321  */
 322 static int
 323 priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
 324 {
 325         int ret;
 326         MKSTR(value_str, "%lu", value);
 327
 328         ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
 329         if (ret == -1) {
 330                 DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
 331                       name, value_str, value, strerror(errno));
 332                 return -1;
 333         }
 334         return 0;
 335 }
 336
 337 /**
 338  * Perform ifreq ioctl() on associated Ethernet device.
 339  *
 340  * @param[in] priv
 341  *   Pointer to private structure.
 342  * @param req
 343  *   Request number to pass to ioctl().
 344  * @param[out] ifr
 345  *   Interface request structure output buffer.
 346  *
 347  * @return
 348  *   0 on success, -1 on failure and errno is set.
 349  */
 350 int
 351 priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
 352 {
 353         int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
 354         int ret = -1;
 355
 356         if (sock == -1)
 357                 return ret;
 358         if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
 359                 ret = ioctl(sock, req, ifr);
 360         close(sock);
 361         return ret;
 362 }
 363
 364 /**
 365  * Return the number of active VFs for the current device.
 366  *
 367  * @param[in] priv
 368  *   Pointer to private structure.
 369  * @param[out] num_vfs
 370  *   Number of active VFs.
 371  *
 372  * @return
 373  *   0 on success, -1 on failure and errno is set.
 374  */
 375 int
 376 priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
 377 {
 378         /* The sysfs entry name depends on the operating system. */
 379         const char **name = (const char *[]){
 380                 "device/sriov_numvfs",
 381                 "device/mlx5_num_vfs",
 382                 NULL,
 383         };
 384         int ret;
 385
 386         do {
 387                 unsigned long ulong_num_vfs;
 388
 389                 ret = priv_get_sysfs_ulong(priv, *name, &ulong_num_vfs);
 390                 if (!ret)
 391                         *num_vfs = ulong_num_vfs;
 392         } while (*(++name) && ret);
 393         return ret;
 394 }
 395
 396 /**
 397  * Get device MTU.
 398  *
 399  * @param priv
 400  *   Pointer to private structure.
 401  * @param[out] mtu
 402  *   MTU value output buffer.
 403  *
 404  * @return
 405  *   0 on success, -1 on failure and errno is set.
 406  */
 407 int
 408 priv_get_mtu(struct priv *priv, uint16_t *mtu)
 409 {
 410         unsigned long ulong_mtu;
 411
 412         if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
 413                 return -1;
 414         *mtu = ulong_mtu;
 415         return 0;
 416 }
 417
 418 /**
 419  * Set device MTU.
 420  *
 421  * @param priv
 422  *   Pointer to private structure.
 423  * @param mtu
 424  *   MTU value to set.
 425  *
 426  * @return
 427  *   0 on success, -1 on failure and errno is set.
 428  */
 429 static int
 430 priv_set_mtu(struct priv *priv, uint16_t mtu)
 431 {
 432         uint16_t new_mtu;
 433
 434         if (priv_set_sysfs_ulong(priv, "mtu", mtu) ||
 435             priv_get_mtu(priv, &new_mtu))
 436                 return -1;
 437         if (new_mtu == mtu)
 438                 return 0;
 439         errno = EINVAL;
 440         return -1;
 441 }
 442
 443 /**
 444  * Set device flags.
 445  *
 446  * @param priv
 447  *   Pointer to private structure.
 448  * @param keep
 449  *   Bitmask for flags that must remain untouched.
 450  * @param flags
 451  *   Bitmask for flags to modify.
 452  *
 453  * @return
 454  *   0 on success, -1 on failure and errno is set.
 455  */
 456 int
 457 priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
 458 {
 459         unsigned long tmp;
 460
 461         if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
 462                 return -1;
 463         tmp &= keep;
 464         tmp |= (flags & (~keep));
 465         return priv_set_sysfs_ulong(priv, "flags", tmp);
 466 }
 467
 468 /**
 469  * Ethernet device configuration.
 470  *
 471  * Prepare the driver for a given number of TX and RX queues.
 472  *
 473  * @param dev
 474  *   Pointer to Ethernet device structure.
 475  *
 476  * @return
 477  *   0 on success, errno value on failure.
 478  */
 479 static int
 480 dev_configure(struct rte_eth_dev *dev)
 481 {
 482         struct priv *priv = dev->data->dev_private;
 483         unsigned int rxqs_n = dev->data->nb_rx_queues;
 484         unsigned int txqs_n = dev->data->nb_tx_queues;
 485         unsigned int i;
 486         unsigned int j;
 487         unsigned int reta_idx_n;
 488
 489         priv->rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
 490         priv->rxqs = (void *)dev->data->rx_queues;
 491         priv->txqs = (void *)dev->data->tx_queues;
 492         if (txqs_n != priv->txqs_n) {
 493                 INFO("%p: TX queues number update: %u -> %u",
 494                      (void *)dev, priv->txqs_n, txqs_n);
 495                 priv->txqs_n = txqs_n;
 496         }
 497         if (rxqs_n > priv->ind_table_max_size) {
 498                 ERROR("cannot handle this many RX queues (%u)", rxqs_n);
 499                 return EINVAL;
 500         }
 501         if (rxqs_n == priv->rxqs_n)
 502                 return 0;
 503         INFO("%p: RX queues number update: %u -> %u",
 504              (void *)dev, priv->rxqs_n, rxqs_n);
 505         priv->rxqs_n = rxqs_n;
 506         /* If the requested number of RX queues is not a power of two, use the
 507          * maximum indirection table size for better balancing.
 508          * The result is always rounded to the next power of two. */
 509         reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
 510                                      priv->ind_table_max_size :
 511                                      rxqs_n));
 512         if (priv_rss_reta_index_resize(priv, reta_idx_n))
 513                 return ENOMEM;
 514         /* When the number of RX queues is not a power of two, the remaining
 515          * table entries are padded with reused WQs and hashes are not spread
 516          * uniformly. */
 517         for (i = 0, j = 0; (i != reta_idx_n); ++i) {
 518                 (*priv->reta_idx)[i] = j;
 519                 if (++j == rxqs_n)
 520                         j = 0;
 521         }
 522         return 0;
 523 }
 524
 525 /**
 526  * DPDK callback for Ethernet device configuration.
 527  *
 528  * @param dev
 529  *   Pointer to Ethernet device structure.
 530  *
 531  * @return
 532  *   0 on success, negative errno value on failure.
 533  */
 534 int
 535 mlx5_dev_configure(struct rte_eth_dev *dev)
 536 {
 537         struct priv *priv = dev->data->dev_private;
 538         int ret;
 539
 540         if (mlx5_is_secondary())
 541                 return -E_RTE_SECONDARY;
 542
 543         priv_lock(priv);
 544         ret = dev_configure(dev);
 545         assert(ret >= 0);
 546         priv_unlock(priv);
 547         return -ret;
 548 }
 549
 550 /**
 551  * DPDK callback to get information about the device.
 552  *
 553  * @param dev
 554  *   Pointer to Ethernet device structure.
 555  * @param[out] info
 556  *   Info structure output buffer.
 557  */
 558 void
 559 mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 560 {
 561         struct priv *priv = mlx5_get_priv(dev);
 562         unsigned int max;
 563         char ifname[IF_NAMESIZE];
 564
 565         info->pci_dev = RTE_DEV_TO_PCI(dev->device);
 566
 567         priv_lock(priv);
 568         /* FIXME: we should ask the device for these values. */
 569         info->min_rx_bufsize = 32;
 570         info->max_rx_pktlen = 65536;
 571         /*
 572          * Since we need one CQ per QP, the limit is the minimum number
 573          * between the two values.
 574          */
 575         max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
 576                priv->device_attr.max_qp : priv->device_attr.max_cq);
 577         /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
 578         if (max >= 65535)
 579                 max = 65535;
 580         info->max_rx_queues = max;
 581         info->max_tx_queues = max;
 582         info->max_mac_addrs = RTE_DIM(priv->mac);
 583         info->rx_offload_capa =
 584                 (priv->hw_csum ?
 585                  (DEV_RX_OFFLOAD_IPV4_CKSUM |
 586                   DEV_RX_OFFLOAD_UDP_CKSUM |
 587                   DEV_RX_OFFLOAD_TCP_CKSUM) :
 588                  0) |
 589                 (priv->hw_vlan_strip ? DEV_RX_OFFLOAD_VLAN_STRIP : 0);
 590         if (!priv->mps)
 591                 info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
 592         if (priv->hw_csum)
 593                 info->tx_offload_capa |=
 594                         (DEV_TX_OFFLOAD_IPV4_CKSUM |
 595                          DEV_TX_OFFLOAD_UDP_CKSUM |
 596                          DEV_TX_OFFLOAD_TCP_CKSUM);
 597         if (priv_get_ifname(priv, &ifname) == 0)
 598                 info->if_index = if_nametoindex(ifname);
 599         /* FIXME: RETA update/query API expects the callee to know the size of
 600          * the indirection table, for this PMD the size varies depending on
 601          * the number of RX queues, it becomes impossible to find the correct
 602          * size if it is not fixed.
 603          * The API should be updated to solve this problem. */
 604         info->reta_size = priv->ind_table_max_size;
 605         info->hash_key_size = ((*priv->rss_conf) ?
 606                                (*priv->rss_conf)[0]->rss_key_len :
 607                                0);
 608         info->speed_capa = priv->link_speed_capa;
 609         priv_unlock(priv);
 610 }
 611
 612 const uint32_t *
 613 mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 614 {
 615         static const uint32_t ptypes[] = {
 616                 /* refers to rxq_cq_to_pkt_type() */
 617                 RTE_PTYPE_L3_IPV4,
 618                 RTE_PTYPE_L3_IPV6,
 619                 RTE_PTYPE_INNER_L3_IPV4,
 620                 RTE_PTYPE_INNER_L3_IPV6,
 621                 RTE_PTYPE_UNKNOWN
 622
 623         };
 624
 625         if (dev->rx_pkt_burst == mlx5_rx_burst)
 626                 return ptypes;
 627         return NULL;
 628 }
 629
 630 /**
 631  * Retrieve physical link information (unlocked version using legacy ioctl).
 632  *
 633  * @param dev
 634  *   Pointer to Ethernet device structure.
 635  * @param wait_to_complete
 636  *   Wait for request completion (ignored).
 637  */
 638 static int
 639 mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
 640 {
 641         struct priv *priv = mlx5_get_priv(dev);
 642         struct ethtool_cmd edata = {
 643                 .cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
 644         };
 645         struct ifreq ifr;
 646         struct rte_eth_link dev_link;
 647         int link_speed = 0;
 648
 649         (void)wait_to_complete;
 650         if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
 651                 WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
 652                 return -1;
 653         }
 654         memset(&dev_link, 0, sizeof(dev_link));
 655         dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
 656                                 (ifr.ifr_flags & IFF_RUNNING));
 657         ifr.ifr_data = (void *)&edata;
 658         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
 659                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
 660                      strerror(errno));
 661                 return -1;
 662         }
 663         link_speed = ethtool_cmd_speed(&edata);
 664         if (link_speed == -1)
 665                 dev_link.link_speed = 0;
 666         else
 667                 dev_link.link_speed = link_speed;
 668         priv->link_speed_capa = 0;
 669         if (edata.supported & SUPPORTED_Autoneg)
 670                 priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
 671         if (edata.supported & (SUPPORTED_1000baseT_Full |
 672                                SUPPORTED_1000baseKX_Full))
 673                 priv->link_speed_capa |= ETH_LINK_SPEED_1G;
 674         if (edata.supported & SUPPORTED_10000baseKR_Full)
 675                 priv->link_speed_capa |= ETH_LINK_SPEED_10G;
 676         if (edata.supported & (SUPPORTED_40000baseKR4_Full |
 677                                SUPPORTED_40000baseCR4_Full |
 678                                SUPPORTED_40000baseSR4_Full |
 679                                SUPPORTED_40000baseLR4_Full))
 680                 priv->link_speed_capa |= ETH_LINK_SPEED_40G;
 681         dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
 682                                 ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 683         dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 684                         ETH_LINK_SPEED_FIXED);
 685         if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
 686                 /* Link status changed. */
 687                 dev->data->dev_link = dev_link;
 688                 return 0;
 689         }
 690         /* Link status is still the same. */
 691         return -1;
 692 }
 693
 694 /**
 695  * Retrieve physical link information (unlocked version using new ioctl from
 696  * Linux 4.5).
 697  *
 698  * @param dev
 699  *   Pointer to Ethernet device structure.
 700  * @param wait_to_complete
 701  *   Wait for request completion (ignored).
 702  */
 703 static int
 704 mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
 705 {
 706 #ifdef ETHTOOL_GLINKSETTINGS
 707         struct priv *priv = mlx5_get_priv(dev);
 708         struct ethtool_link_settings edata = {
 709                 .cmd = ETHTOOL_GLINKSETTINGS,
 710         };
 711         struct ifreq ifr;
 712         struct rte_eth_link dev_link;
 713         uint64_t sc;
 714
 715         (void)wait_to_complete;
 716         if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
 717                 WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
 718                 return -1;
 719         }
 720         memset(&dev_link, 0, sizeof(dev_link));
 721         dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
 722                                 (ifr.ifr_flags & IFF_RUNNING));
 723         ifr.ifr_data = (void *)&edata;
 724         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
 725                 DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
 726                       strerror(errno));
 727                 return -1;
 728         }
 729         dev_link.link_speed = edata.speed;
 730         sc = edata.link_mode_masks[0] |
 731                 ((uint64_t)edata.link_mode_masks[1] << 32);
 732         priv->link_speed_capa = 0;
 733         /* Link speeds available in kernel v4.5. */
 734         if (sc & ETHTOOL_LINK_MODE_Autoneg_BIT)
 735                 priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
 736         if (sc & (ETHTOOL_LINK_MODE_1000baseT_Full_BIT |
 737                   ETHTOOL_LINK_MODE_1000baseKX_Full_BIT))
 738                 priv->link_speed_capa |= ETH_LINK_SPEED_1G;
 739         if (sc & (ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT |
 740                   ETHTOOL_LINK_MODE_10000baseKR_Full_BIT |
 741                   ETHTOOL_LINK_MODE_10000baseR_FEC_BIT))
 742                 priv->link_speed_capa |= ETH_LINK_SPEED_10G;
 743         if (sc & (ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT |
 744                   ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT))
 745                 priv->link_speed_capa |= ETH_LINK_SPEED_20G;
 746         if (sc & (ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT |
 747                   ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT |
 748                   ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT |
 749                   ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT))
 750                 priv->link_speed_capa |= ETH_LINK_SPEED_40G;
 751         if (sc & (ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT |
 752                   ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT |
 753                   ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT |
 754                   ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT))
 755                 priv->link_speed_capa |= ETH_LINK_SPEED_56G;
 756         /* Link speeds available in kernel v4.6. */
 757 #ifdef HAVE_ETHTOOL_LINK_MODE_25G
 758         if (sc & (ETHTOOL_LINK_MODE_25000baseCR_Full_BIT |
 759                   ETHTOOL_LINK_MODE_25000baseKR_Full_BIT |
 760                   ETHTOOL_LINK_MODE_25000baseSR_Full_BIT))
 761                 priv->link_speed_capa |= ETH_LINK_SPEED_25G;
 762 #endif
 763 #ifdef HAVE_ETHTOOL_LINK_MODE_50G
 764         if (sc & (ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT |
 765                   ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT))
 766                 priv->link_speed_capa |= ETH_LINK_SPEED_50G;
 767 #endif
 768 #ifdef HAVE_ETHTOOL_LINK_MODE_100G
 769         if (sc & (ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT |
 770                   ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT |
 771                   ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT |
 772                   ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))
 773                 priv->link_speed_capa |= ETH_LINK_SPEED_100G;
 774 #endif
 775         dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
 776                                 ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 777         dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 778                                   ETH_LINK_SPEED_FIXED);
 779         if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
 780                 /* Link status changed. */
 781                 dev->data->dev_link = dev_link;
 782                 return 0;
 783         }
 784 #else
 785         (void)dev;
 786         (void)wait_to_complete;
 787 #endif
 788         /* Link status is still the same. */
 789         return -1;
 790 }
 791
 792 /**
 793  * DPDK callback to retrieve physical link information (unlocked version).
 794  *
 795  * @param dev
 796  *   Pointer to Ethernet device structure.
 797  * @param wait_to_complete
 798  *   Wait for request completion (ignored).
 799  */
 800 int
 801 mlx5_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
 802 {
 803         int ret;
 804
 805         ret = mlx5_link_update_unlocked_gs(dev, wait_to_complete);
 806         if (ret < 0)
 807                 ret = mlx5_link_update_unlocked_gset(dev, wait_to_complete);
 808         return ret;
 809 }
 810
 811 /**
 812  * DPDK callback to retrieve physical link information.
 813  *
 814  * @param dev
 815  *   Pointer to Ethernet device structure.
 816  * @param wait_to_complete
 817  *   Wait for request completion (ignored).
 818  */
 819 int
 820 mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 821 {
 822         struct priv *priv = mlx5_get_priv(dev);
 823         int ret;
 824
 825         priv_lock(priv);
 826         ret = mlx5_link_update_unlocked(dev, wait_to_complete);
 827         priv_unlock(priv);
 828         return ret;
 829 }
 830
 831 /**
 832  * DPDK callback to change the MTU.
 833  *
 834  * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
 835  * received). Use this as a hint to enable/disable scattered packets support
 836  * and improve performance when not needed.
 837  * Since failure is not an option, reconfiguring queues on the fly is not
 838  * recommended.
 839  *
 840  * @param dev
 841  *   Pointer to Ethernet device structure.
 842  * @param in_mtu
 843  *   New MTU.
 844  *
 845  * @return
 846  *   0 on success, negative errno value on failure.
 847  */
 848 int
 849 mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 850 {
 851         struct priv *priv = dev->data->dev_private;
 852         int ret = 0;
 853         unsigned int i;
 854         uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
 855                 mlx5_rx_burst;
 856         unsigned int max_frame_len;
 857         int rehash;
 858         int restart = priv->started;
 859
 860         if (mlx5_is_secondary())
 861                 return -E_RTE_SECONDARY;
 862
 863         priv_lock(priv);
 864         /* Set kernel interface MTU first. */
 865         if (priv_set_mtu(priv, mtu)) {
 866                 ret = errno;
 867                 WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
 868                      strerror(ret));
 869                 goto out;
 870         } else
 871                 DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
 872         /* Temporarily replace RX handler with a fake one, assuming it has not
 873          * been copied elsewhere. */
 874         dev->rx_pkt_burst = removed_rx_burst;
 875         /* Make sure everyone has left mlx5_rx_burst() and uses
 876          * removed_rx_burst() instead. */
 877         rte_wmb();
 878         usleep(1000);
 879         /* MTU does not include header and CRC. */
 880         max_frame_len = ETHER_HDR_LEN + mtu + ETHER_CRC_LEN;
 881         /* Check if at least one queue is going to need a SGE update. */
 882         for (i = 0; i != priv->rxqs_n; ++i) {
 883                 struct rxq *rxq = (*priv->rxqs)[i];
 884                 unsigned int mb_len;
 885                 unsigned int size = RTE_PKTMBUF_HEADROOM + max_frame_len;
 886                 unsigned int sges_n;
 887
 888                 if (rxq == NULL)
 889                         continue;
 890                 mb_len = rte_pktmbuf_data_room_size(rxq->mp);
 891                 assert(mb_len >= RTE_PKTMBUF_HEADROOM);
 892                 /*
 893                  * Determine the number of SGEs needed for a full packet
 894                  * and round it to the next power of two.
 895                  */
 896                 sges_n = log2above((size / mb_len) + !!(size % mb_len));
 897                 if (sges_n != rxq->sges_n)
 898                         break;
 899         }
 900         /*
 901          * If all queues have the right number of SGEs, a simple rehash
 902          * of their buffers is enough, otherwise SGE information can only
 903          * be updated in a queue by recreating it. All resources that depend
 904          * on queues (flows, indirection tables) must be recreated as well in
 905          * that case.
 906          */
 907         rehash = (i == priv->rxqs_n);
 908         if (!rehash) {
 909                 /* Clean up everything as with mlx5_dev_stop(). */
 910                 priv_special_flow_disable_all(priv);
 911                 priv_mac_addrs_disable(priv);
 912                 priv_destroy_hash_rxqs(priv);
 913                 priv_fdir_disable(priv);
 914                 priv_dev_interrupt_handler_uninstall(priv, dev);
 915         }
 916 recover:
 917         /* Reconfigure each RX queue. */
 918         for (i = 0; (i != priv->rxqs_n); ++i) {
 919                 struct rxq *rxq = (*priv->rxqs)[i];
 920                 struct rxq_ctrl *rxq_ctrl =
 921                         container_of(rxq, struct rxq_ctrl, rxq);
 922                 int sp;
 923                 unsigned int mb_len;
 924                 unsigned int tmp;
 925
 926                 if (rxq == NULL)
 927                         continue;
 928                 mb_len = rte_pktmbuf_data_room_size(rxq->mp);
 929                 assert(mb_len >= RTE_PKTMBUF_HEADROOM);
 930                 /* Toggle scattered support (sp) if necessary. */
 931                 sp = (max_frame_len > (mb_len - RTE_PKTMBUF_HEADROOM));
 932                 /* Provide new values to rxq_setup(). */
 933                 dev->data->dev_conf.rxmode.jumbo_frame = sp;
 934                 dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
 935                 if (rehash)
 936                         ret = rxq_rehash(dev, rxq_ctrl);
 937                 else
 938                         ret = rxq_ctrl_setup(dev, rxq_ctrl, 1 << rxq->elts_n,
 939                                              rxq_ctrl->socket, NULL, rxq->mp);
 940                 if (!ret)
 941                         continue;
 942                 /* Attempt to roll back in case of error. */
 943                 tmp = (mb_len << rxq->sges_n) - RTE_PKTMBUF_HEADROOM;
 944                 if (max_frame_len != tmp) {
 945                         max_frame_len = tmp;
 946                         goto recover;
 947                 }
 948                 /* Double fault, disable RX. */
 949                 break;
 950         }
 951         /*
 952          * Use a safe RX burst function in case of error, otherwise mimic
 953          * mlx5_dev_start().
 954          */
 955         if (ret) {
 956                 ERROR("unable to reconfigure RX queues, RX disabled");
 957                 rx_func = removed_rx_burst;
 958         } else if (restart &&
 959                  !rehash &&
 960                  !priv_create_hash_rxqs(priv) &&
 961                  !priv_rehash_flows(priv)) {
 962                 if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
 963                         priv_fdir_enable(priv);
 964                 priv_dev_interrupt_handler_install(priv, dev);
 965         }
 966         priv->mtu = mtu;
 967         /* Burst functions can now be called again. */
 968         rte_wmb();
 969         dev->rx_pkt_burst = rx_func;
 970 out:
 971         priv_unlock(priv);
 972         assert(ret >= 0);
 973         return -ret;
 974 }
 975
 976 /**
 977  * DPDK callback to get flow control status.
 978  *
 979  * @param dev
 980  *   Pointer to Ethernet device structure.
 981  * @param[out] fc_conf
 982  *   Flow control output buffer.
 983  *
 984  * @return
 985  *   0 on success, negative errno value on failure.
 986  */
 987 int
 988 mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 989 {
 990         struct priv *priv = dev->data->dev_private;
 991         struct ifreq ifr;
 992         struct ethtool_pauseparam ethpause = {
 993                 .cmd = ETHTOOL_GPAUSEPARAM
 994         };
 995         int ret;
 996
 997         if (mlx5_is_secondary())
 998                 return -E_RTE_SECONDARY;
 999
1000         ifr.ifr_data = (void *)&ethpause;
1001         priv_lock(priv);
1002         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
1003                 ret = errno;
1004                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
1005                      " failed: %s",
1006                      strerror(ret));
1007                 goto out;
1008         }
1009
1010         fc_conf->autoneg = ethpause.autoneg;
1011         if (ethpause.rx_pause && ethpause.tx_pause)
1012                 fc_conf->mode = RTE_FC_FULL;
1013         else if (ethpause.rx_pause)
1014                 fc_conf->mode = RTE_FC_RX_PAUSE;
1015         else if (ethpause.tx_pause)
1016                 fc_conf->mode = RTE_FC_TX_PAUSE;
1017         else
1018                 fc_conf->mode = RTE_FC_NONE;
1019         ret = 0;
1020
1021 out:
1022         priv_unlock(priv);
1023         assert(ret >= 0);
1024         return -ret;
1025 }
1026
1027 /**
1028  * DPDK callback to modify flow control parameters.
1029  *
1030  * @param dev
1031  *   Pointer to Ethernet device structure.
1032  * @param[in] fc_conf
1033  *   Flow control parameters.
1034  *
1035  * @return
1036  *   0 on success, negative errno value on failure.
1037  */
1038 int
1039 mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
1040 {
1041         struct priv *priv = dev->data->dev_private;
1042         struct ifreq ifr;
1043         struct ethtool_pauseparam ethpause = {
1044                 .cmd = ETHTOOL_SPAUSEPARAM
1045         };
1046         int ret;
1047
1048         if (mlx5_is_secondary())
1049                 return -E_RTE_SECONDARY;
1050
1051         ifr.ifr_data = (void *)&ethpause;
1052         ethpause.autoneg = fc_conf->autoneg;
1053         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
1054             (fc_conf->mode & RTE_FC_RX_PAUSE))
1055                 ethpause.rx_pause = 1;
1056         else
1057                 ethpause.rx_pause = 0;
1058
1059         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
1060             (fc_conf->mode & RTE_FC_TX_PAUSE))
1061                 ethpause.tx_pause = 1;
1062         else
1063                 ethpause.tx_pause = 0;
1064
1065         priv_lock(priv);
1066         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
1067                 ret = errno;
1068                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
1069                      " failed: %s",
1070                      strerror(ret));
1071                 goto out;
1072         }
1073         ret = 0;
1074
1075 out:
1076         priv_unlock(priv);
1077         assert(ret >= 0);
1078         return -ret;
1079 }
1080
1081 /**
1082  * Get PCI information from struct ibv_device.
1083  *
1084  * @param device
1085  *   Pointer to Ethernet device structure.
1086  * @param[out] pci_addr
1087  *   PCI bus address output buffer.
1088  *
1089  * @return
1090  *   0 on success, -1 on failure and errno is set.
1091  */
1092 int
1093 mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
1094                             struct rte_pci_addr *pci_addr)
1095 {
1096         FILE *file;
1097         char line[32];
1098         MKSTR(path, "%s/device/uevent", device->ibdev_path);
1099
1100         file = fopen(path, "rb");
1101         if (file == NULL)
1102                 return -1;
1103         while (fgets(line, sizeof(line), file) == line) {
1104                 size_t len = strlen(line);
1105                 int ret;
1106
1107                 /* Truncate long lines. */
1108                 if (len == (sizeof(line) - 1))
1109                         while (line[(len - 1)] != '\n') {
1110                                 ret = fgetc(file);
1111                                 if (ret == EOF)
1112                                         break;
1113                                 line[(len - 1)] = ret;
1114                         }
1115                 /* Extract information. */
1116                 if (sscanf(line,
1117                            "PCI_SLOT_NAME="
1118                            "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
1119                            &pci_addr->domain,
1120                            &pci_addr->bus,
1121                            &pci_addr->devid,
1122                            &pci_addr->function) == 4) {
1123                         ret = 0;
1124                         break;
1125                 }
1126         }
1127         fclose(file);
1128         return 0;
1129 }
1130
1131 /**
1132  * Link status handler.
1133  *
1134  * @param priv
1135  *   Pointer to private structure.
1136  * @param dev
1137  *   Pointer to the rte_eth_dev structure.
1138  *
1139  * @return
1140  *   Nonzero if the callback process can be called immediately.
1141  */
1142 static int
1143 priv_dev_link_status_handler(struct priv *priv, struct rte_eth_dev *dev)
1144 {
1145         struct ibv_async_event event;
1146         int port_change = 0;
1147         int ret = 0;
1148
1149         /* Read all message and acknowledge them. */
1150         for (;;) {
1151                 if (ibv_get_async_event(priv->ctx, &event))
1152                         break;
1153
1154                 if (event.event_type == IBV_EVENT_PORT_ACTIVE ||
1155                     event.event_type == IBV_EVENT_PORT_ERR)
1156                         port_change = 1;
1157                 else
1158                         DEBUG("event type %d on port %d not handled",
1159                               event.event_type, event.element.port_num);
1160                 ibv_ack_async_event(&event);
1161         }
1162
1163         if (port_change ^ priv->pending_alarm) {
1164                 struct rte_eth_link *link = &dev->data->dev_link;
1165
1166                 priv->pending_alarm = 0;
1167                 mlx5_link_update_unlocked(dev, 0);
1168                 if (((link->link_speed == 0) && link->link_status) ||
1169                     ((link->link_speed != 0) && !link->link_status)) {
1170                         /* Inconsistent status, check again later. */
1171                         priv->pending_alarm = 1;
1172                         rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
1173                                           mlx5_dev_link_status_handler,
1174                                           dev);
1175                 } else
1176                         ret = 1;
1177         }
1178         return ret;
1179 }
1180
1181 /**
1182  * Handle delayed link status event.
1183  *
1184  * @param arg
1185  *   Registered argument.
1186  */
1187 void
1188 mlx5_dev_link_status_handler(void *arg)
1189 {
1190         struct rte_eth_dev *dev = arg;
1191         struct priv *priv = dev->data->dev_private;
1192         int ret;
1193
1194         priv_lock(priv);
1195         assert(priv->pending_alarm == 1);
1196         ret = priv_dev_link_status_handler(priv, dev);
1197         priv_unlock(priv);
1198         if (ret)
1199                 _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
1200 }
1201
1202 /**
1203  * Handle interrupts from the NIC.
1204  *
1205  * @param[in] intr_handle
1206  *   Interrupt handler.
1207  * @param cb_arg
1208  *   Callback argument.
1209  */
1210 void
1211 mlx5_dev_interrupt_handler(struct rte_intr_handle *intr_handle, void *cb_arg)
1212 {
1213         struct rte_eth_dev *dev = cb_arg;
1214         struct priv *priv = dev->data->dev_private;
1215         int ret;
1216
1217         (void)intr_handle;
1218         priv_lock(priv);
1219         ret = priv_dev_link_status_handler(priv, dev);
1220         priv_unlock(priv);
1221         if (ret)
1222                 _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
1223 }
1224
1225 /**
1226  * Uninstall interrupt handler.
1227  *
1228  * @param priv
1229  *   Pointer to private structure.
1230  * @param dev
1231  *   Pointer to the rte_eth_dev structure.
1232  */
1233 void
1234 priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
1235 {
1236         if (!dev->data->dev_conf.intr_conf.lsc)
1237                 return;
1238         rte_intr_callback_unregister(&priv->intr_handle,
1239                                      mlx5_dev_interrupt_handler,
1240                                      dev);
1241         if (priv->pending_alarm)
1242                 rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
1243         priv->pending_alarm = 0;
1244         priv->intr_handle.fd = 0;
1245         priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
1246 }
1247
1248 /**
1249  * Install interrupt handler.
1250  *
1251  * @param priv
1252  *   Pointer to private structure.
1253  * @param dev
1254  *   Pointer to the rte_eth_dev structure.
1255  */
1256 void
1257 priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
1258 {
1259         int rc, flags;
1260
1261         if (!dev->data->dev_conf.intr_conf.lsc)
1262                 return;
1263         assert(priv->ctx->async_fd > 0);
1264         flags = fcntl(priv->ctx->async_fd, F_GETFL);
1265         rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
1266         if (rc < 0) {
1267                 INFO("failed to change file descriptor async event queue");
1268                 dev->data->dev_conf.intr_conf.lsc = 0;
1269         } else {
1270                 priv->intr_handle.fd = priv->ctx->async_fd;
1271                 priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
1272                 rte_intr_callback_register(&priv->intr_handle,
1273                                            mlx5_dev_interrupt_handler,
1274                                            dev);
1275         }
1276 }
1277
1278 /**
1279  * Change the link state (UP / DOWN).
1280  *
1281  * @param priv
1282  *   Pointer to Ethernet device structure.
1283  * @param up
1284  *   Nonzero for link up, otherwise link down.
1285  *
1286  * @return
1287  *   0 on success, errno value on failure.
1288  */
1289 static int
1290 priv_set_link(struct priv *priv, int up)
1291 {
1292         struct rte_eth_dev *dev = priv->dev;
1293         int err;
1294
1295         if (up) {
1296                 err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
1297                 if (err)
1298                         return err;
1299                 priv_select_tx_function(priv);
1300                 priv_select_rx_function(priv);
1301         } else {
1302                 err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
1303                 if (err)
1304                         return err;
1305                 dev->rx_pkt_burst = removed_rx_burst;
1306                 dev->tx_pkt_burst = removed_tx_burst;
1307         }
1308         return 0;
1309 }
1310
1311 /**
1312  * DPDK callback to bring the link DOWN.
1313  *
1314  * @param dev
1315  *   Pointer to Ethernet device structure.
1316  *
1317  * @return
1318  *   0 on success, errno value on failure.
1319  */
1320 int
1321 mlx5_set_link_down(struct rte_eth_dev *dev)
1322 {
1323         struct priv *priv = dev->data->dev_private;
1324         int err;
1325
1326         priv_lock(priv);
1327         err = priv_set_link(priv, 0);
1328         priv_unlock(priv);
1329         return err;
1330 }
1331
1332 /**
1333  * DPDK callback to bring the link UP.
1334  *
1335  * @param dev
1336  *   Pointer to Ethernet device structure.
1337  *
1338  * @return
1339  *   0 on success, errno value on failure.
1340  */
1341 int
1342 mlx5_set_link_up(struct rte_eth_dev *dev)
1343 {
1344         struct priv *priv = dev->data->dev_private;
1345         int err;
1346
1347         priv_lock(priv);
1348         err = priv_set_link(priv, 1);
1349         priv_unlock(priv);
1350         return err;
1351 }
1352
1353 /**
1354  * Configure secondary process queues from a private data pointer (primary
1355  * or secondary) and update burst callbacks. Can take place only once.
1356  *
1357  * All queues must have been previously created by the primary process to
1358  * avoid undefined behavior.
1359  *
1360  * @param priv
1361  *   Private data pointer from either primary or secondary process.
1362  *
1363  * @return
1364  *   Private data pointer from secondary process, NULL in case of error.
1365  */
1366 struct priv *
1367 mlx5_secondary_data_setup(struct priv *priv)
1368 {
1369         unsigned int port_id = 0;
1370         struct mlx5_secondary_data *sd;
1371         void **tx_queues;
1372         void **rx_queues;
1373         unsigned int nb_tx_queues;
1374         unsigned int nb_rx_queues;
1375         unsigned int i;
1376
1377         /* priv must be valid at this point. */
1378         assert(priv != NULL);
1379         /* priv->dev must also be valid but may point to local memory from
1380          * another process, possibly with the same address and must not
1381          * be dereferenced yet. */
1382         assert(priv->dev != NULL);
1383         /* Determine port ID by finding out where priv comes from. */
1384         while (1) {
1385                 sd = &mlx5_secondary_data[port_id];
1386                 rte_spinlock_lock(&sd->lock);
1387                 /* Primary process? */
1388                 if (sd->primary_priv == priv)
1389                         break;
1390                 /* Secondary process? */
1391                 if (sd->data.dev_private == priv)
1392                         break;
1393                 rte_spinlock_unlock(&sd->lock);
1394                 if (++port_id == RTE_DIM(mlx5_secondary_data))
1395                         port_id = 0;
1396         }
1397         /* Switch to secondary private structure. If private data has already
1398          * been updated by another thread, there is nothing else to do. */
1399         priv = sd->data.dev_private;
1400         if (priv->dev->data == &sd->data)
1401                 goto end;
1402         /* Sanity checks. Secondary private structure is supposed to point
1403          * to local eth_dev, itself still pointing to the shared device data
1404          * structure allocated by the primary process. */
1405         assert(sd->shared_dev_data != &sd->data);
1406         assert(sd->data.nb_tx_queues == 0);
1407         assert(sd->data.tx_queues == NULL);
1408         assert(sd->data.nb_rx_queues == 0);
1409         assert(sd->data.rx_queues == NULL);
1410         assert(priv != sd->primary_priv);
1411         assert(priv->dev->data == sd->shared_dev_data);
1412         assert(priv->txqs_n == 0);
1413         assert(priv->txqs == NULL);
1414         assert(priv->rxqs_n == 0);
1415         assert(priv->rxqs == NULL);
1416         nb_tx_queues = sd->shared_dev_data->nb_tx_queues;
1417         nb_rx_queues = sd->shared_dev_data->nb_rx_queues;
1418         /* Allocate local storage for queues. */
1419         tx_queues = rte_zmalloc("secondary ethdev->tx_queues",
1420                                 sizeof(sd->data.tx_queues[0]) * nb_tx_queues,
1421                                 RTE_CACHE_LINE_SIZE);
1422         rx_queues = rte_zmalloc("secondary ethdev->rx_queues",
1423                                 sizeof(sd->data.rx_queues[0]) * nb_rx_queues,
1424                                 RTE_CACHE_LINE_SIZE);
1425         if (tx_queues == NULL || rx_queues == NULL)
1426                 goto error;
1427         /* Lock to prevent control operations during setup. */
1428         priv_lock(priv);
1429         /* TX queues. */
1430         for (i = 0; i != nb_tx_queues; ++i) {
1431                 struct txq *primary_txq = (*sd->primary_priv->txqs)[i];
1432                 struct txq_ctrl *primary_txq_ctrl;
1433                 struct txq_ctrl *txq_ctrl;
1434
1435                 if (primary_txq == NULL)
1436                         continue;
1437                 primary_txq_ctrl = container_of(primary_txq,
1438                                                 struct txq_ctrl, txq);
1439                 txq_ctrl = rte_calloc_socket("TXQ", 1, sizeof(*txq_ctrl) +
1440                                              (1 << primary_txq->elts_n) *
1441                                              sizeof(struct rte_mbuf *), 0,
1442                                              primary_txq_ctrl->socket);
1443                 if (txq_ctrl != NULL) {
1444                         if (txq_ctrl_setup(priv->dev,
1445                                            txq_ctrl,
1446                                            1 << primary_txq->elts_n,
1447                                            primary_txq_ctrl->socket,
1448                                            NULL) == 0) {
1449                                 txq_ctrl->txq.stats.idx =
1450                                         primary_txq->stats.idx;
1451                                 tx_queues[i] = &txq_ctrl->txq;
1452                                 continue;
1453                         }
1454                         rte_free(txq_ctrl);
1455                 }
1456                 while (i) {
1457                         txq_ctrl = tx_queues[--i];
1458                         txq_cleanup(txq_ctrl);
1459                         rte_free(txq_ctrl);
1460                 }
1461                 goto error;
1462         }
1463         /* RX queues. */
1464         for (i = 0; i != nb_rx_queues; ++i) {
1465                 struct rxq_ctrl *primary_rxq =
1466                         container_of((*sd->primary_priv->rxqs)[i],
1467                                      struct rxq_ctrl, rxq);
1468
1469                 if (primary_rxq == NULL)
1470                         continue;
1471                 /* Not supported yet. */
1472                 rx_queues[i] = NULL;
1473         }
1474         /* Update everything. */
1475         priv->txqs = (void *)tx_queues;
1476         priv->txqs_n = nb_tx_queues;
1477         priv->rxqs = (void *)rx_queues;
1478         priv->rxqs_n = nb_rx_queues;
1479         sd->data.rx_queues = rx_queues;
1480         sd->data.tx_queues = tx_queues;
1481         sd->data.nb_rx_queues = nb_rx_queues;
1482         sd->data.nb_tx_queues = nb_tx_queues;
1483         sd->data.dev_link = sd->shared_dev_data->dev_link;
1484         sd->data.mtu = sd->shared_dev_data->mtu;
1485         memcpy(sd->data.rx_queue_state, sd->shared_dev_data->rx_queue_state,
1486                sizeof(sd->data.rx_queue_state));
1487         memcpy(sd->data.tx_queue_state, sd->shared_dev_data->tx_queue_state,
1488                sizeof(sd->data.tx_queue_state));
1489         sd->data.dev_flags = sd->shared_dev_data->dev_flags;
1490         /* Use local data from now on. */
1491         rte_mb();
1492         priv->dev->data = &sd->data;
1493         rte_mb();
1494         priv_select_tx_function(priv);
1495         priv_select_rx_function(priv);
1496         priv_unlock(priv);
1497 end:
1498         /* More sanity checks. */
1499         assert(priv->dev->data == &sd->data);
1500         rte_spinlock_unlock(&sd->lock);
1501         return priv;
1502 error:
1503         priv_unlock(priv);
1504         rte_free(tx_queues);
1505         rte_free(rx_queues);
1506         rte_spinlock_unlock(&sd->lock);
1507         return NULL;
1508 }
1509
1510 /**
1511  * Configure the TX function to use.
1512  *
1513  * @param priv
1514  *   Pointer to private structure.
1515  */
1516 void
1517 priv_select_tx_function(struct priv *priv)
1518 {
1519         priv->dev->tx_pkt_burst = mlx5_tx_burst;
1520         /* Select appropriate TX function. */
1521         if (priv->mps && priv->txq_inline) {
1522                 priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
1523                 DEBUG("selected MPW inline TX function");
1524         } else if (priv->mps) {
1525                 priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw;
1526                 DEBUG("selected MPW TX function");
1527         }
1528 }
1529
1530 /**
1531  * Configure the RX function to use.
1532  *
1533  * @param priv
1534  *   Pointer to private structure.
1535  */
1536 void
1537 priv_select_rx_function(struct priv *priv)
1538 {
1539         priv->dev->rx_pkt_burst = mlx5_rx_burst;
1540 }