drivers/net/mlx5/mlx5_ethdev.c

   1 /*-
   2  *   BSD LICENSE
   3  *
   4  *   Copyright 2015 6WIND S.A.
   5  *   Copyright 2015 Mellanox.
   6  *
   7  *   Redistribution and use in source and binary forms, with or without
   8  *   modification, are permitted provided that the following conditions
   9  *   are met:
  10  *
  11  *     * Redistributions of source code must retain the above copyright
  12  *       notice, this list of conditions and the following disclaimer.
  13  *     * Redistributions in binary form must reproduce the above copyright
  14  *       notice, this list of conditions and the following disclaimer in
  15  *       the documentation and/or other materials provided with the
  16  *       distribution.
  17  *     * Neither the name of 6WIND S.A. nor the names of its
  18  *       contributors may be used to endorse or promote products derived
  19  *       from this software without specific prior written permission.
  20  *
  21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  */
  33
  34 #include <stddef.h>
  35 #include <assert.h>
  36 #include <unistd.h>
  37 #include <stdint.h>
  38 #include <stdio.h>
  39 #include <string.h>
  40 #include <stdlib.h>
  41 #include <errno.h>
  42 #include <dirent.h>
  43 #include <net/if.h>
  44 #include <sys/ioctl.h>
  45 #include <sys/socket.h>
  46 #include <sys/utsname.h>
  47 #include <netinet/in.h>
  48 #include <linux/ethtool.h>
  49 #include <linux/sockios.h>
  50 #include <linux/version.h>
  51 #include <fcntl.h>
  52
  53 /* DPDK headers don't like -pedantic. */
  54 #ifdef PEDANTIC
  55 #pragma GCC diagnostic ignored "-Wpedantic"
  56 #endif
  57 #include <rte_atomic.h>
  58 #include <rte_ethdev.h>
  59 #include <rte_mbuf.h>
  60 #include <rte_common.h>
  61 #include <rte_interrupts.h>
  62 #include <rte_alarm.h>
  63 #include <rte_malloc.h>
  64 #ifdef PEDANTIC
  65 #pragma GCC diagnostic error "-Wpedantic"
  66 #endif
  67
  68 #include "mlx5.h"
  69 #include "mlx5_rxtx.h"
  70 #include "mlx5_utils.h"
  71
  72 /* Add defines in case the running kernel is not the same as user headers. */
  73 #ifndef ETHTOOL_GLINKSETTINGS
  74 struct ethtool_link_settings {
  75         uint32_t cmd;
  76         uint32_t speed;
  77         uint8_t duplex;
  78         uint8_t port;
  79         uint8_t phy_address;
  80         uint8_t autoneg;
  81         uint8_t mdio_support;
  82         uint8_t eth_to_mdix;
  83         uint8_t eth_tp_mdix_ctrl;
  84         int8_t link_mode_masks_nwords;
  85         uint32_t reserved[8];
  86         uint32_t link_mode_masks[];
  87 };
  88
  89 #define ETHTOOL_GLINKSETTINGS 0x0000004c
  90 #define ETHTOOL_LINK_MODE_1000baseT_Full_BIT 5
  91 #define ETHTOOL_LINK_MODE_Autoneg_BIT 6
  92 #define ETHTOOL_LINK_MODE_1000baseKX_Full_BIT 17
  93 #define ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT 18
  94 #define ETHTOOL_LINK_MODE_10000baseKR_Full_BIT 19
  95 #define ETHTOOL_LINK_MODE_10000baseR_FEC_BIT 20
  96 #define ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT 21
  97 #define ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT 22
  98 #define ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT 23
  99 #define ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT 24
 100 #define ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT 25
 101 #define ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT 26
 102 #define ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT 27
 103 #define ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT 28
 104 #define ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT 29
 105 #define ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT 30
 106 #endif
 107 #ifndef HAVE_ETHTOOL_LINK_MODE_25G
 108 #define ETHTOOL_LINK_MODE_25000baseCR_Full_BIT 31
 109 #define ETHTOOL_LINK_MODE_25000baseKR_Full_BIT 32
 110 #define ETHTOOL_LINK_MODE_25000baseSR_Full_BIT 33
 111 #endif
 112 #ifndef HAVE_ETHTOOL_LINK_MODE_50G
 113 #define ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT 34
 114 #define ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT 35
 115 #endif
 116 #ifndef HAVE_ETHTOOL_LINK_MODE_100G
 117 #define ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT 36
 118 #define ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT 37
 119 #define ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT 38
 120 #define ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT 39
 121 #endif
 122
 123 /**
 124  * Return private structure associated with an Ethernet device.
 125  *
 126  * @param dev
 127  *   Pointer to Ethernet device structure.
 128  *
 129  * @return
 130  *   Pointer to private structure.
 131  */
 132 struct priv *
 133 mlx5_get_priv(struct rte_eth_dev *dev)
 134 {
 135         struct mlx5_secondary_data *sd;
 136
 137         if (!mlx5_is_secondary())
 138                 return dev->data->dev_private;
 139         sd = &mlx5_secondary_data[dev->data->port_id];
 140         return sd->data.dev_private;
 141 }
 142
 143 /**
 144  * Check if running as a secondary process.
 145  *
 146  * @return
 147  *   Nonzero if running as a secondary process.
 148  */
 149 inline int
 150 mlx5_is_secondary(void)
 151 {
 152         return rte_eal_process_type() != RTE_PROC_PRIMARY;
 153 }
 154
 155 /**
 156  * Get interface name from private structure.
 157  *
 158  * @param[in] priv
 159  *   Pointer to private structure.
 160  * @param[out] ifname
 161  *   Interface name output buffer.
 162  *
 163  * @return
 164  *   0 on success, -1 on failure and errno is set.
 165  */
 166 int
 167 priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
 168 {
 169         DIR *dir;
 170         struct dirent *dent;
 171         unsigned int dev_type = 0;
 172         unsigned int dev_port_prev = ~0u;
 173         char match[IF_NAMESIZE] = "";
 174
 175         {
 176                 MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
 177
 178                 dir = opendir(path);
 179                 if (dir == NULL)
 180                         return -1;
 181         }
 182         while ((dent = readdir(dir)) != NULL) {
 183                 char *name = dent->d_name;
 184                 FILE *file;
 185                 unsigned int dev_port;
 186                 int r;
 187
 188                 if ((name[0] == '.') &&
 189                     ((name[1] == '\0') ||
 190                      ((name[1] == '.') && (name[2] == '\0'))))
 191                         continue;
 192
 193                 MKSTR(path, "%s/device/net/%s/%s",
 194                       priv->ctx->device->ibdev_path, name,
 195                       (dev_type ? "dev_id" : "dev_port"));
 196
 197                 file = fopen(path, "rb");
 198                 if (file == NULL) {
 199                         if (errno != ENOENT)
 200                                 continue;
 201                         /*
 202                          * Switch to dev_id when dev_port does not exist as
 203                          * is the case with Linux kernel versions < 3.15.
 204                          */
 205 try_dev_id:
 206                         match[0] = '\0';
 207                         if (dev_type)
 208                                 break;
 209                         dev_type = 1;
 210                         dev_port_prev = ~0u;
 211                         rewinddir(dir);
 212                         continue;
 213                 }
 214                 r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
 215                 fclose(file);
 216                 if (r != 1)
 217                         continue;
 218                 /*
 219                  * Switch to dev_id when dev_port returns the same value for
 220                  * all ports. May happen when using a MOFED release older than
 221                  * 3.0 with a Linux kernel >= 3.15.
 222                  */
 223                 if (dev_port == dev_port_prev)
 224                         goto try_dev_id;
 225                 dev_port_prev = dev_port;
 226                 if (dev_port == (priv->port - 1u))
 227                         snprintf(match, sizeof(match), "%s", name);
 228         }
 229         closedir(dir);
 230         if (match[0] == '\0')
 231                 return -1;
 232         strncpy(*ifname, match, sizeof(*ifname));
 233         return 0;
 234 }
 235
 236 /**
 237  * Check if the counter is located on ib counters file.
 238  *
 239  * @param[in] cntr
 240  *   Counter name.
 241  *
 242  * @return
 243  *   1 if counter is located on ib counters file , 0 otherwise.
 244  */
 245 int
 246 priv_is_ib_cntr(const char *cntr)
 247 {
 248         if (!strcmp(cntr, "out_of_buffer"))
 249                 return 1;
 250         return 0;
 251 }
 252
 253 /**
 254  * Read from sysfs entry.
 255  *
 256  * @param[in] priv
 257  *   Pointer to private structure.
 258  * @param[in] entry
 259  *   Entry name relative to sysfs path.
 260  * @param[out] buf
 261  *   Data output buffer.
 262  * @param size
 263  *   Buffer size.
 264  *
 265  * @return
 266  *   0 on success, -1 on failure and errno is set.
 267  */
 268 static int
 269 priv_sysfs_read(const struct priv *priv, const char *entry,
 270                 char *buf, size_t size)
 271 {
 272         char ifname[IF_NAMESIZE];
 273         FILE *file;
 274         int ret;
 275         int err;
 276
 277         if (priv_get_ifname(priv, &ifname))
 278                 return -1;
 279
 280         if (priv_is_ib_cntr(entry)) {
 281                 MKSTR(path, "%s/ports/1/hw_counters/%s",
 282                       priv->ctx->device->ibdev_path, entry);
 283                 file = fopen(path, "rb");
 284         } else {
 285                 MKSTR(path, "%s/device/net/%s/%s",
 286                       priv->ctx->device->ibdev_path, ifname, entry);
 287                 file = fopen(path, "rb");
 288         }
 289         if (file == NULL)
 290                 return -1;
 291         ret = fread(buf, 1, size, file);
 292         err = errno;
 293         if (((size_t)ret < size) && (ferror(file)))
 294                 ret = -1;
 295         else
 296                 ret = size;
 297         fclose(file);
 298         errno = err;
 299         return ret;
 300 }
 301
 302 /**
 303  * Write to sysfs entry.
 304  *
 305  * @param[in] priv
 306  *   Pointer to private structure.
 307  * @param[in] entry
 308  *   Entry name relative to sysfs path.
 309  * @param[in] buf
 310  *   Data buffer.
 311  * @param size
 312  *   Buffer size.
 313  *
 314  * @return
 315  *   0 on success, -1 on failure and errno is set.
 316  */
 317 static int
 318 priv_sysfs_write(const struct priv *priv, const char *entry,
 319                  char *buf, size_t size)
 320 {
 321         char ifname[IF_NAMESIZE];
 322         FILE *file;
 323         int ret;
 324         int err;
 325
 326         if (priv_get_ifname(priv, &ifname))
 327                 return -1;
 328
 329         MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
 330               ifname, entry);
 331
 332         file = fopen(path, "wb");
 333         if (file == NULL)
 334                 return -1;
 335         ret = fwrite(buf, 1, size, file);
 336         err = errno;
 337         if (((size_t)ret < size) || (ferror(file)))
 338                 ret = -1;
 339         else
 340                 ret = size;
 341         fclose(file);
 342         errno = err;
 343         return ret;
 344 }
 345
 346 /**
 347  * Get unsigned long sysfs property.
 348  *
 349  * @param priv
 350  *   Pointer to private structure.
 351  * @param[in] name
 352  *   Entry name relative to sysfs path.
 353  * @param[out] value
 354  *   Value output buffer.
 355  *
 356  * @return
 357  *   0 on success, -1 on failure and errno is set.
 358  */
 359 static int
 360 priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
 361 {
 362         int ret;
 363         unsigned long value_ret;
 364         char value_str[32];
 365
 366         ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
 367         if (ret == -1) {
 368                 DEBUG("cannot read %s value from sysfs: %s",
 369                       name, strerror(errno));
 370                 return -1;
 371         }
 372         value_str[ret] = '\0';
 373         errno = 0;
 374         value_ret = strtoul(value_str, NULL, 0);
 375         if (errno) {
 376                 DEBUG("invalid %s value `%s': %s", name, value_str,
 377                       strerror(errno));
 378                 return -1;
 379         }
 380         *value = value_ret;
 381         return 0;
 382 }
 383
 384 /**
 385  * Set unsigned long sysfs property.
 386  *
 387  * @param priv
 388  *   Pointer to private structure.
 389  * @param[in] name
 390  *   Entry name relative to sysfs path.
 391  * @param value
 392  *   Value to set.
 393  *
 394  * @return
 395  *   0 on success, -1 on failure and errno is set.
 396  */
 397 static int
 398 priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
 399 {
 400         int ret;
 401         MKSTR(value_str, "%lu", value);
 402
 403         ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
 404         if (ret == -1) {
 405                 DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
 406                       name, value_str, value, strerror(errno));
 407                 return -1;
 408         }
 409         return 0;
 410 }
 411
 412 /**
 413  * Perform ifreq ioctl() on associated Ethernet device.
 414  *
 415  * @param[in] priv
 416  *   Pointer to private structure.
 417  * @param req
 418  *   Request number to pass to ioctl().
 419  * @param[out] ifr
 420  *   Interface request structure output buffer.
 421  *
 422  * @return
 423  *   0 on success, -1 on failure and errno is set.
 424  */
 425 int
 426 priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
 427 {
 428         int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
 429         int ret = -1;
 430
 431         if (sock == -1)
 432                 return ret;
 433         if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
 434                 ret = ioctl(sock, req, ifr);
 435         close(sock);
 436         return ret;
 437 }
 438
 439 /**
 440  * Return the number of active VFs for the current device.
 441  *
 442  * @param[in] priv
 443  *   Pointer to private structure.
 444  * @param[out] num_vfs
 445  *   Number of active VFs.
 446  *
 447  * @return
 448  *   0 on success, -1 on failure and errno is set.
 449  */
 450 int
 451 priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
 452 {
 453         /* The sysfs entry name depends on the operating system. */
 454         const char **name = (const char *[]){
 455                 "device/sriov_numvfs",
 456                 "device/mlx5_num_vfs",
 457                 NULL,
 458         };
 459         int ret;
 460
 461         do {
 462                 unsigned long ulong_num_vfs;
 463
 464                 ret = priv_get_sysfs_ulong(priv, *name, &ulong_num_vfs);
 465                 if (!ret)
 466                         *num_vfs = ulong_num_vfs;
 467         } while (*(++name) && ret);
 468         return ret;
 469 }
 470
 471 /**
 472  * Get device MTU.
 473  *
 474  * @param priv
 475  *   Pointer to private structure.
 476  * @param[out] mtu
 477  *   MTU value output buffer.
 478  *
 479  * @return
 480  *   0 on success, -1 on failure and errno is set.
 481  */
 482 int
 483 priv_get_mtu(struct priv *priv, uint16_t *mtu)
 484 {
 485         unsigned long ulong_mtu;
 486
 487         if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
 488                 return -1;
 489         *mtu = ulong_mtu;
 490         return 0;
 491 }
 492
 493 /**
 494  * Read device counter from sysfs.
 495  *
 496  * @param priv
 497  *   Pointer to private structure.
 498  * @param name
 499  *   Counter name.
 500  * @param[out] cntr
 501  *   Counter output buffer.
 502  *
 503  * @return
 504  *   0 on success, -1 on failure and errno is set.
 505  */
 506 int
 507 priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
 508 {
 509         unsigned long ulong_ctr;
 510
 511         if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
 512                 return -1;
 513         *cntr = ulong_ctr;
 514         return 0;
 515 }
 516
 517 /**
 518  * Set device MTU.
 519  *
 520  * @param priv
 521  *   Pointer to private structure.
 522  * @param mtu
 523  *   MTU value to set.
 524  *
 525  * @return
 526  *   0 on success, -1 on failure and errno is set.
 527  */
 528 static int
 529 priv_set_mtu(struct priv *priv, uint16_t mtu)
 530 {
 531         uint16_t new_mtu;
 532
 533         if (priv_set_sysfs_ulong(priv, "mtu", mtu) ||
 534             priv_get_mtu(priv, &new_mtu))
 535                 return -1;
 536         if (new_mtu == mtu)
 537                 return 0;
 538         errno = EINVAL;
 539         return -1;
 540 }
 541
 542 /**
 543  * Set device flags.
 544  *
 545  * @param priv
 546  *   Pointer to private structure.
 547  * @param keep
 548  *   Bitmask for flags that must remain untouched.
 549  * @param flags
 550  *   Bitmask for flags to modify.
 551  *
 552  * @return
 553  *   0 on success, -1 on failure and errno is set.
 554  */
 555 int
 556 priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
 557 {
 558         unsigned long tmp;
 559
 560         if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
 561                 return -1;
 562         tmp &= keep;
 563         tmp |= (flags & (~keep));
 564         return priv_set_sysfs_ulong(priv, "flags", tmp);
 565 }
 566
 567 /**
 568  * Ethernet device configuration.
 569  *
 570  * Prepare the driver for a given number of TX and RX queues.
 571  *
 572  * @param dev
 573  *   Pointer to Ethernet device structure.
 574  *
 575  * @return
 576  *   0 on success, errno value on failure.
 577  */
 578 static int
 579 dev_configure(struct rte_eth_dev *dev)
 580 {
 581         struct priv *priv = dev->data->dev_private;
 582         unsigned int rxqs_n = dev->data->nb_rx_queues;
 583         unsigned int txqs_n = dev->data->nb_tx_queues;
 584         unsigned int i;
 585         unsigned int j;
 586         unsigned int reta_idx_n;
 587
 588         priv->rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
 589         priv->rxqs = (void *)dev->data->rx_queues;
 590         priv->txqs = (void *)dev->data->tx_queues;
 591         if (txqs_n != priv->txqs_n) {
 592                 INFO("%p: TX queues number update: %u -> %u",
 593                      (void *)dev, priv->txqs_n, txqs_n);
 594                 priv->txqs_n = txqs_n;
 595         }
 596         if (rxqs_n > priv->ind_table_max_size) {
 597                 ERROR("cannot handle this many RX queues (%u)", rxqs_n);
 598                 return EINVAL;
 599         }
 600         if (rxqs_n == priv->rxqs_n)
 601                 return 0;
 602         INFO("%p: RX queues number update: %u -> %u",
 603              (void *)dev, priv->rxqs_n, rxqs_n);
 604         priv->rxqs_n = rxqs_n;
 605         /* If the requested number of RX queues is not a power of two, use the
 606          * maximum indirection table size for better balancing.
 607          * The result is always rounded to the next power of two. */
 608         reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
 609                                      priv->ind_table_max_size :
 610                                      rxqs_n));
 611         if (priv_rss_reta_index_resize(priv, reta_idx_n))
 612                 return ENOMEM;
 613         /* When the number of RX queues is not a power of two, the remaining
 614          * table entries are padded with reused WQs and hashes are not spread
 615          * uniformly. */
 616         for (i = 0, j = 0; (i != reta_idx_n); ++i) {
 617                 (*priv->reta_idx)[i] = j;
 618                 if (++j == rxqs_n)
 619                         j = 0;
 620         }
 621         return 0;
 622 }
 623
 624 /**
 625  * DPDK callback for Ethernet device configuration.
 626  *
 627  * @param dev
 628  *   Pointer to Ethernet device structure.
 629  *
 630  * @return
 631  *   0 on success, negative errno value on failure.
 632  */
 633 int
 634 mlx5_dev_configure(struct rte_eth_dev *dev)
 635 {
 636         struct priv *priv = dev->data->dev_private;
 637         int ret;
 638
 639         if (mlx5_is_secondary())
 640                 return -E_RTE_SECONDARY;
 641
 642         priv_lock(priv);
 643         ret = dev_configure(dev);
 644         assert(ret >= 0);
 645         priv_unlock(priv);
 646         return -ret;
 647 }
 648
 649 /**
 650  * DPDK callback to get information about the device.
 651  *
 652  * @param dev
 653  *   Pointer to Ethernet device structure.
 654  * @param[out] info
 655  *   Info structure output buffer.
 656  */
 657 void
 658 mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 659 {
 660         struct priv *priv = mlx5_get_priv(dev);
 661         unsigned int max;
 662         char ifname[IF_NAMESIZE];
 663
 664         info->pci_dev = RTE_DEV_TO_PCI(dev->device);
 665
 666         priv_lock(priv);
 667         /* FIXME: we should ask the device for these values. */
 668         info->min_rx_bufsize = 32;
 669         info->max_rx_pktlen = 65536;
 670         /*
 671          * Since we need one CQ per QP, the limit is the minimum number
 672          * between the two values.
 673          */
 674         max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
 675                priv->device_attr.max_qp : priv->device_attr.max_cq);
 676         /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
 677         if (max >= 65535)
 678                 max = 65535;
 679         info->max_rx_queues = max;
 680         info->max_tx_queues = max;
 681         info->max_mac_addrs = RTE_DIM(priv->mac);
 682         info->rx_offload_capa =
 683                 (priv->hw_csum ?
 684                  (DEV_RX_OFFLOAD_IPV4_CKSUM |
 685                   DEV_RX_OFFLOAD_UDP_CKSUM |
 686                   DEV_RX_OFFLOAD_TCP_CKSUM) :
 687                  0) |
 688                 (priv->hw_vlan_strip ? DEV_RX_OFFLOAD_VLAN_STRIP : 0);
 689         if (!priv->mps)
 690                 info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
 691         if (priv->hw_csum)
 692                 info->tx_offload_capa |=
 693                         (DEV_TX_OFFLOAD_IPV4_CKSUM |
 694                          DEV_TX_OFFLOAD_UDP_CKSUM |
 695                          DEV_TX_OFFLOAD_TCP_CKSUM);
 696         if (priv->tso)
 697                 info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
 698         if (priv->tunnel_en)
 699                 info->tx_offload_capa |= (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
 700                                           DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
 701                                           DEV_TX_OFFLOAD_GRE_TNL_TSO);
 702         if (priv_get_ifname(priv, &ifname) == 0)
 703                 info->if_index = if_nametoindex(ifname);
 704         /* FIXME: RETA update/query API expects the callee to know the size of
 705          * the indirection table, for this PMD the size varies depending on
 706          * the number of RX queues, it becomes impossible to find the correct
 707          * size if it is not fixed.
 708          * The API should be updated to solve this problem. */
 709         info->reta_size = priv->ind_table_max_size;
 710         info->hash_key_size = ((*priv->rss_conf) ?
 711                                (*priv->rss_conf)[0]->rss_key_len :
 712                                0);
 713         info->speed_capa = priv->link_speed_capa;
 714         priv_unlock(priv);
 715 }
 716
 717 const uint32_t *
 718 mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 719 {
 720         static const uint32_t ptypes[] = {
 721                 /* refers to rxq_cq_to_pkt_type() */
 722                 RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
 723                 RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
 724                 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
 725                 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
 726                 RTE_PTYPE_UNKNOWN
 727
 728         };
 729
 730         if (dev->rx_pkt_burst == mlx5_rx_burst)
 731                 return ptypes;
 732         return NULL;
 733 }
 734
 735 /**
 736  * DPDK callback to retrieve physical link information.
 737  *
 738  * @param dev
 739  *   Pointer to Ethernet device structure.
 740  * @param wait_to_complete
 741  *   Wait for request completion (ignored).
 742  */
 743 static int
 744 mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
 745 {
 746         struct priv *priv = mlx5_get_priv(dev);
 747         struct ethtool_cmd edata = {
 748                 .cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
 749         };
 750         struct ifreq ifr;
 751         struct rte_eth_link dev_link;
 752         int link_speed = 0;
 753
 754         /* priv_lock() is not taken to allow concurrent calls. */
 755
 756         (void)wait_to_complete;
 757         if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
 758                 WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
 759                 return -1;
 760         }
 761         memset(&dev_link, 0, sizeof(dev_link));
 762         dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
 763                                 (ifr.ifr_flags & IFF_RUNNING));
 764         ifr.ifr_data = (void *)&edata;
 765         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
 766                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
 767                      strerror(errno));
 768                 return -1;
 769         }
 770         link_speed = ethtool_cmd_speed(&edata);
 771         if (link_speed == -1)
 772                 dev_link.link_speed = 0;
 773         else
 774                 dev_link.link_speed = link_speed;
 775         priv->link_speed_capa = 0;
 776         if (edata.supported & SUPPORTED_Autoneg)
 777                 priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
 778         if (edata.supported & (SUPPORTED_1000baseT_Full |
 779                                SUPPORTED_1000baseKX_Full))
 780                 priv->link_speed_capa |= ETH_LINK_SPEED_1G;
 781         if (edata.supported & SUPPORTED_10000baseKR_Full)
 782                 priv->link_speed_capa |= ETH_LINK_SPEED_10G;
 783         if (edata.supported & (SUPPORTED_40000baseKR4_Full |
 784                                SUPPORTED_40000baseCR4_Full |
 785                                SUPPORTED_40000baseSR4_Full |
 786                                SUPPORTED_40000baseLR4_Full))
 787                 priv->link_speed_capa |= ETH_LINK_SPEED_40G;
 788         dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
 789                                 ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 790         dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 791                         ETH_LINK_SPEED_FIXED);
 792         if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
 793                 /* Link status changed. */
 794                 dev->data->dev_link = dev_link;
 795                 return 0;
 796         }
 797         /* Link status is still the same. */
 798         return -1;
 799 }
 800
 801 /**
 802  * Retrieve physical link information (unlocked version using new ioctl).
 803  *
 804  * @param dev
 805  *   Pointer to Ethernet device structure.
 806  * @param wait_to_complete
 807  *   Wait for request completion (ignored).
 808  */
 809 static int
 810 mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
 811 {
 812         struct priv *priv = mlx5_get_priv(dev);
 813         struct ethtool_link_settings edata = {
 814                 .cmd = ETHTOOL_GLINKSETTINGS,
 815         };
 816         struct ifreq ifr;
 817         struct rte_eth_link dev_link;
 818         uint64_t sc;
 819
 820         (void)wait_to_complete;
 821         if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
 822                 WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
 823                 return -1;
 824         }
 825         memset(&dev_link, 0, sizeof(dev_link));
 826         dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
 827                                 (ifr.ifr_flags & IFF_RUNNING));
 828         ifr.ifr_data = (void *)&edata;
 829         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
 830                 DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
 831                       strerror(errno));
 832                 return -1;
 833         }
 834         dev_link.link_speed = edata.speed;
 835         sc = edata.link_mode_masks[0] |
 836                 ((uint64_t)edata.link_mode_masks[1] << 32);
 837         priv->link_speed_capa = 0;
 838         if (sc & ETHTOOL_LINK_MODE_Autoneg_BIT)
 839                 priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
 840         if (sc & (ETHTOOL_LINK_MODE_1000baseT_Full_BIT |
 841                   ETHTOOL_LINK_MODE_1000baseKX_Full_BIT))
 842                 priv->link_speed_capa |= ETH_LINK_SPEED_1G;
 843         if (sc & (ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT |
 844                   ETHTOOL_LINK_MODE_10000baseKR_Full_BIT |
 845                   ETHTOOL_LINK_MODE_10000baseR_FEC_BIT))
 846                 priv->link_speed_capa |= ETH_LINK_SPEED_10G;
 847         if (sc & (ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT |
 848                   ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT))
 849                 priv->link_speed_capa |= ETH_LINK_SPEED_20G;
 850         if (sc & (ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT |
 851                   ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT |
 852                   ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT |
 853                   ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT))
 854                 priv->link_speed_capa |= ETH_LINK_SPEED_40G;
 855         if (sc & (ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT |
 856                   ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT |
 857                   ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT |
 858                   ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT))
 859                 priv->link_speed_capa |= ETH_LINK_SPEED_56G;
 860         if (sc & (ETHTOOL_LINK_MODE_25000baseCR_Full_BIT |
 861                   ETHTOOL_LINK_MODE_25000baseKR_Full_BIT |
 862                   ETHTOOL_LINK_MODE_25000baseSR_Full_BIT))
 863                 priv->link_speed_capa |= ETH_LINK_SPEED_25G;
 864         if (sc & (ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT |
 865                   ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT))
 866                 priv->link_speed_capa |= ETH_LINK_SPEED_50G;
 867         if (sc & (ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT |
 868                   ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT |
 869                   ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT |
 870                   ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))
 871                 priv->link_speed_capa |= ETH_LINK_SPEED_100G;
 872         dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
 873                                 ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 874         dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 875                                   ETH_LINK_SPEED_FIXED);
 876         if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
 877                 /* Link status changed. */
 878                 dev->data->dev_link = dev_link;
 879                 return 0;
 880         }
 881         /* Link status is still the same. */
 882         return -1;
 883 }
 884
 885 /**
 886  * DPDK callback to retrieve physical link information.
 887  *
 888  * @param dev
 889  *   Pointer to Ethernet device structure.
 890  * @param wait_to_complete
 891  *   Wait for request completion (ignored).
 892  */
 893 int
 894 mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 895 {
 896         struct utsname utsname;
 897         int ver[3];
 898
 899         if (uname(&utsname) == -1 ||
 900             sscanf(utsname.release, "%d.%d.%d",
 901                    &ver[0], &ver[1], &ver[2]) != 3 ||
 902             KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
 903                 return mlx5_link_update_unlocked_gset(dev, wait_to_complete);
 904         return mlx5_link_update_unlocked_gs(dev, wait_to_complete);
 905 }
 906
 907 /**
 908  * DPDK callback to change the MTU.
 909  *
 910  * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
 911  * received). Use this as a hint to enable/disable scattered packets support
 912  * and improve performance when not needed.
 913  * Since failure is not an option, reconfiguring queues on the fly is not
 914  * recommended.
 915  *
 916  * @param dev
 917  *   Pointer to Ethernet device structure.
 918  * @param in_mtu
 919  *   New MTU.
 920  *
 921  * @return
 922  *   0 on success, negative errno value on failure.
 923  */
 924 int
 925 mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 926 {
 927         struct priv *priv = dev->data->dev_private;
 928         int ret = 0;
 929         unsigned int i;
 930         uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
 931                 mlx5_rx_burst;
 932         unsigned int max_frame_len;
 933         int rehash;
 934         int restart = priv->started;
 935
 936         if (mlx5_is_secondary())
 937                 return -E_RTE_SECONDARY;
 938
 939         priv_lock(priv);
 940         /* Set kernel interface MTU first. */
 941         if (priv_set_mtu(priv, mtu)) {
 942                 ret = errno;
 943                 WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
 944                      strerror(ret));
 945                 goto out;
 946         } else
 947                 DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
 948         /* Temporarily replace RX handler with a fake one, assuming it has not
 949          * been copied elsewhere. */
 950         dev->rx_pkt_burst = removed_rx_burst;
 951         /* Make sure everyone has left mlx5_rx_burst() and uses
 952          * removed_rx_burst() instead. */
 953         rte_wmb();
 954         usleep(1000);
 955         /* MTU does not include header and CRC. */
 956         max_frame_len = ETHER_HDR_LEN + mtu + ETHER_CRC_LEN;
 957         /* Check if at least one queue is going to need a SGE update. */
 958         for (i = 0; i != priv->rxqs_n; ++i) {
 959                 struct rxq *rxq = (*priv->rxqs)[i];
 960                 unsigned int mb_len;
 961                 unsigned int size = RTE_PKTMBUF_HEADROOM + max_frame_len;
 962                 unsigned int sges_n;
 963
 964                 if (rxq == NULL)
 965                         continue;
 966                 mb_len = rte_pktmbuf_data_room_size(rxq->mp);
 967                 assert(mb_len >= RTE_PKTMBUF_HEADROOM);
 968                 /*
 969                  * Determine the number of SGEs needed for a full packet
 970                  * and round it to the next power of two.
 971                  */
 972                 sges_n = log2above((size / mb_len) + !!(size % mb_len));
 973                 if (sges_n != rxq->sges_n)
 974                         break;
 975         }
 976         /*
 977          * If all queues have the right number of SGEs, a simple rehash
 978          * of their buffers is enough, otherwise SGE information can only
 979          * be updated in a queue by recreating it. All resources that depend
 980          * on queues (flows, indirection tables) must be recreated as well in
 981          * that case.
 982          */
 983         rehash = (i == priv->rxqs_n);
 984         if (!rehash) {
 985                 /* Clean up everything as with mlx5_dev_stop(). */
 986                 priv_special_flow_disable_all(priv);
 987                 priv_mac_addrs_disable(priv);
 988                 priv_destroy_hash_rxqs(priv);
 989                 priv_fdir_disable(priv);
 990                 priv_dev_interrupt_handler_uninstall(priv, dev);
 991         }
 992 recover:
 993         /* Reconfigure each RX queue. */
 994         for (i = 0; (i != priv->rxqs_n); ++i) {
 995                 struct rxq *rxq = (*priv->rxqs)[i];
 996                 struct rxq_ctrl *rxq_ctrl =
 997                         container_of(rxq, struct rxq_ctrl, rxq);
 998                 unsigned int mb_len;
 999                 unsigned int tmp;
1000
1001                 if (rxq == NULL)
1002                         continue;
1003                 mb_len = rte_pktmbuf_data_room_size(rxq->mp);
1004                 assert(mb_len >= RTE_PKTMBUF_HEADROOM);
1005                 /* Provide new values to rxq_setup(). */
1006                 dev->data->dev_conf.rxmode.jumbo_frame =
1007                         (max_frame_len > ETHER_MAX_LEN);
1008                 dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
1009                 if (rehash)
1010                         ret = rxq_rehash(dev, rxq_ctrl);
1011                 else
1012                         ret = rxq_ctrl_setup(dev, rxq_ctrl, 1 << rxq->elts_n,
1013                                              rxq_ctrl->socket, NULL, rxq->mp);
1014                 if (!ret)
1015                         continue;
1016                 /* Attempt to roll back in case of error. */
1017                 tmp = (mb_len << rxq->sges_n) - RTE_PKTMBUF_HEADROOM;
1018                 if (max_frame_len != tmp) {
1019                         max_frame_len = tmp;
1020                         goto recover;
1021                 }
1022                 /* Double fault, disable RX. */
1023                 break;
1024         }
1025         /*
1026          * Use a safe RX burst function in case of error, otherwise mimic
1027          * mlx5_dev_start().
1028          */
1029         if (ret) {
1030                 ERROR("unable to reconfigure RX queues, RX disabled");
1031                 rx_func = removed_rx_burst;
1032         } else if (restart &&
1033                  !rehash &&
1034                  !priv_create_hash_rxqs(priv) &&
1035                  !priv_rehash_flows(priv)) {
1036                 if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
1037                         priv_fdir_enable(priv);
1038                 priv_dev_interrupt_handler_install(priv, dev);
1039         }
1040         priv->mtu = mtu;
1041         /* Burst functions can now be called again. */
1042         rte_wmb();
1043         dev->rx_pkt_burst = rx_func;
1044 out:
1045         priv_unlock(priv);
1046         assert(ret >= 0);
1047         return -ret;
1048 }
1049
1050 /**
1051  * DPDK callback to get flow control status.
1052  *
1053  * @param dev
1054  *   Pointer to Ethernet device structure.
1055  * @param[out] fc_conf
1056  *   Flow control output buffer.
1057  *
1058  * @return
1059  *   0 on success, negative errno value on failure.
1060  */
1061 int
1062 mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
1063 {
1064         struct priv *priv = dev->data->dev_private;
1065         struct ifreq ifr;
1066         struct ethtool_pauseparam ethpause = {
1067                 .cmd = ETHTOOL_GPAUSEPARAM
1068         };
1069         int ret;
1070
1071         if (mlx5_is_secondary())
1072                 return -E_RTE_SECONDARY;
1073
1074         ifr.ifr_data = (void *)&ethpause;
1075         priv_lock(priv);
1076         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
1077                 ret = errno;
1078                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
1079                      " failed: %s",
1080                      strerror(ret));
1081                 goto out;
1082         }
1083
1084         fc_conf->autoneg = ethpause.autoneg;
1085         if (ethpause.rx_pause && ethpause.tx_pause)
1086                 fc_conf->mode = RTE_FC_FULL;
1087         else if (ethpause.rx_pause)
1088                 fc_conf->mode = RTE_FC_RX_PAUSE;
1089         else if (ethpause.tx_pause)
1090                 fc_conf->mode = RTE_FC_TX_PAUSE;
1091         else
1092                 fc_conf->mode = RTE_FC_NONE;
1093         ret = 0;
1094
1095 out:
1096         priv_unlock(priv);
1097         assert(ret >= 0);
1098         return -ret;
1099 }
1100
1101 /**
1102  * DPDK callback to modify flow control parameters.
1103  *
1104  * @param dev
1105  *   Pointer to Ethernet device structure.
1106  * @param[in] fc_conf
1107  *   Flow control parameters.
1108  *
1109  * @return
1110  *   0 on success, negative errno value on failure.
1111  */
1112 int
1113 mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
1114 {
1115         struct priv *priv = dev->data->dev_private;
1116         struct ifreq ifr;
1117         struct ethtool_pauseparam ethpause = {
1118                 .cmd = ETHTOOL_SPAUSEPARAM
1119         };
1120         int ret;
1121
1122         if (mlx5_is_secondary())
1123                 return -E_RTE_SECONDARY;
1124
1125         ifr.ifr_data = (void *)&ethpause;
1126         ethpause.autoneg = fc_conf->autoneg;
1127         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
1128             (fc_conf->mode & RTE_FC_RX_PAUSE))
1129                 ethpause.rx_pause = 1;
1130         else
1131                 ethpause.rx_pause = 0;
1132
1133         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
1134             (fc_conf->mode & RTE_FC_TX_PAUSE))
1135                 ethpause.tx_pause = 1;
1136         else
1137                 ethpause.tx_pause = 0;
1138
1139         priv_lock(priv);
1140         if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
1141                 ret = errno;
1142                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
1143                      " failed: %s",
1144                      strerror(ret));
1145                 goto out;
1146         }
1147         ret = 0;
1148
1149 out:
1150         priv_unlock(priv);
1151         assert(ret >= 0);
1152         return -ret;
1153 }
1154
1155 /**
1156  * Get PCI information from struct ibv_device.
1157  *
1158  * @param device
1159  *   Pointer to Ethernet device structure.
1160  * @param[out] pci_addr
1161  *   PCI bus address output buffer.
1162  *
1163  * @return
1164  *   0 on success, -1 on failure and errno is set.
1165  */
1166 int
1167 mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
1168                             struct rte_pci_addr *pci_addr)
1169 {
1170         FILE *file;
1171         char line[32];
1172         MKSTR(path, "%s/device/uevent", device->ibdev_path);
1173
1174         file = fopen(path, "rb");
1175         if (file == NULL)
1176                 return -1;
1177         while (fgets(line, sizeof(line), file) == line) {
1178                 size_t len = strlen(line);
1179                 int ret;
1180
1181                 /* Truncate long lines. */
1182                 if (len == (sizeof(line) - 1))
1183                         while (line[(len - 1)] != '\n') {
1184                                 ret = fgetc(file);
1185                                 if (ret == EOF)
1186                                         break;
1187                                 line[(len - 1)] = ret;
1188                         }
1189                 /* Extract information. */
1190                 if (sscanf(line,
1191                            "PCI_SLOT_NAME="
1192                            "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
1193                            &pci_addr->domain,
1194                            &pci_addr->bus,
1195                            &pci_addr->devid,
1196                            &pci_addr->function) == 4) {
1197                         ret = 0;
1198                         break;
1199                 }
1200         }
1201         fclose(file);
1202         return 0;
1203 }
1204
1205 /**
1206  * Link status handler.
1207  *
1208  * @param priv
1209  *   Pointer to private structure.
1210  * @param dev
1211  *   Pointer to the rte_eth_dev structure.
1212  *
1213  * @return
1214  *   Nonzero if the callback process can be called immediately.
1215  */
1216 static int
1217 priv_dev_link_status_handler(struct priv *priv, struct rte_eth_dev *dev)
1218 {
1219         struct ibv_async_event event;
1220         struct rte_eth_link *link = &dev->data->dev_link;
1221         int ret = 0;
1222
1223         /* Read all message and acknowledge them. */
1224         for (;;) {
1225                 if (ibv_get_async_event(priv->ctx, &event))
1226                         break;
1227
1228                 if (event.event_type != IBV_EVENT_PORT_ACTIVE &&
1229                     event.event_type != IBV_EVENT_PORT_ERR)
1230                         DEBUG("event type %d on port %d not handled",
1231                               event.event_type, event.element.port_num);
1232                 ibv_ack_async_event(&event);
1233         }
1234         mlx5_link_update(dev, 0);
1235         if (((link->link_speed == 0) && link->link_status) ||
1236             ((link->link_speed != 0) && !link->link_status)) {
1237                 if (!priv->pending_alarm) {
1238                         /* Inconsistent status, check again later. */
1239                         priv->pending_alarm = 1;
1240                         rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
1241                                           mlx5_dev_link_status_handler,
1242                                           dev);
1243                 }
1244         } else {
1245                 ret = 1;
1246         }
1247         return ret;
1248 }
1249
1250 /**
1251  * Handle delayed link status event.
1252  *
1253  * @param arg
1254  *   Registered argument.
1255  */
1256 void
1257 mlx5_dev_link_status_handler(void *arg)
1258 {
1259         struct rte_eth_dev *dev = arg;
1260         struct priv *priv = dev->data->dev_private;
1261         int ret;
1262
1263         priv_lock(priv);
1264         assert(priv->pending_alarm == 1);
1265         priv->pending_alarm = 0;
1266         ret = priv_dev_link_status_handler(priv, dev);
1267         priv_unlock(priv);
1268         if (ret)
1269                 _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
1270 }
1271
1272 /**
1273  * Handle interrupts from the NIC.
1274  *
1275  * @param[in] intr_handle
1276  *   Interrupt handler.
1277  * @param cb_arg
1278  *   Callback argument.
1279  */
1280 void
1281 mlx5_dev_interrupt_handler(struct rte_intr_handle *intr_handle, void *cb_arg)
1282 {
1283         struct rte_eth_dev *dev = cb_arg;
1284         struct priv *priv = dev->data->dev_private;
1285         int ret;
1286
1287         (void)intr_handle;
1288         priv_lock(priv);
1289         ret = priv_dev_link_status_handler(priv, dev);
1290         priv_unlock(priv);
1291         if (ret)
1292                 _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
1293 }
1294
1295 /**
1296  * Uninstall interrupt handler.
1297  *
1298  * @param priv
1299  *   Pointer to private structure.
1300  * @param dev
1301  *   Pointer to the rte_eth_dev structure.
1302  */
1303 void
1304 priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
1305 {
1306         if (!dev->data->dev_conf.intr_conf.lsc)
1307                 return;
1308         rte_intr_callback_unregister(&priv->intr_handle,
1309                                      mlx5_dev_interrupt_handler,
1310                                      dev);
1311         if (priv->pending_alarm)
1312                 rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
1313         priv->pending_alarm = 0;
1314         priv->intr_handle.fd = 0;
1315         priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
1316 }
1317
1318 /**
1319  * Install interrupt handler.
1320  *
1321  * @param priv
1322  *   Pointer to private structure.
1323  * @param dev
1324  *   Pointer to the rte_eth_dev structure.
1325  */
1326 void
1327 priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
1328 {
1329         int rc, flags;
1330
1331         if (!dev->data->dev_conf.intr_conf.lsc)
1332                 return;
1333         assert(priv->ctx->async_fd > 0);
1334         flags = fcntl(priv->ctx->async_fd, F_GETFL);
1335         rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
1336         if (rc < 0) {
1337                 INFO("failed to change file descriptor async event queue");
1338                 dev->data->dev_conf.intr_conf.lsc = 0;
1339         } else {
1340                 priv->intr_handle.fd = priv->ctx->async_fd;
1341                 priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
1342                 rte_intr_callback_register(&priv->intr_handle,
1343                                            mlx5_dev_interrupt_handler,
1344                                            dev);
1345         }
1346 }
1347
1348 /**
1349  * Change the link state (UP / DOWN).
1350  *
1351  * @param priv
1352  *   Pointer to Ethernet device structure.
1353  * @param up
1354  *   Nonzero for link up, otherwise link down.
1355  *
1356  * @return
1357  *   0 on success, errno value on failure.
1358  */
1359 static int
1360 priv_set_link(struct priv *priv, int up)
1361 {
1362         struct rte_eth_dev *dev = priv->dev;
1363         int err;
1364
1365         if (up) {
1366                 err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
1367                 if (err)
1368                         return err;
1369                 priv_select_tx_function(priv);
1370                 priv_select_rx_function(priv);
1371         } else {
1372                 err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
1373                 if (err)
1374                         return err;
1375                 dev->rx_pkt_burst = removed_rx_burst;
1376                 dev->tx_pkt_burst = removed_tx_burst;
1377         }
1378         return 0;
1379 }
1380
1381 /**
1382  * DPDK callback to bring the link DOWN.
1383  *
1384  * @param dev
1385  *   Pointer to Ethernet device structure.
1386  *
1387  * @return
1388  *   0 on success, errno value on failure.
1389  */
1390 int
1391 mlx5_set_link_down(struct rte_eth_dev *dev)
1392 {
1393         struct priv *priv = dev->data->dev_private;
1394         int err;
1395
1396         priv_lock(priv);
1397         err = priv_set_link(priv, 0);
1398         priv_unlock(priv);
1399         return err;
1400 }
1401
1402 /**
1403  * DPDK callback to bring the link UP.
1404  *
1405  * @param dev
1406  *   Pointer to Ethernet device structure.
1407  *
1408  * @return
1409  *   0 on success, errno value on failure.
1410  */
1411 int
1412 mlx5_set_link_up(struct rte_eth_dev *dev)
1413 {
1414         struct priv *priv = dev->data->dev_private;
1415         int err;
1416
1417         priv_lock(priv);
1418         err = priv_set_link(priv, 1);
1419         priv_unlock(priv);
1420         return err;
1421 }
1422
1423 /**
1424  * Configure secondary process queues from a private data pointer (primary
1425  * or secondary) and update burst callbacks. Can take place only once.
1426  *
1427  * All queues must have been previously created by the primary process to
1428  * avoid undefined behavior.
1429  *
1430  * @param priv
1431  *   Private data pointer from either primary or secondary process.
1432  *
1433  * @return
1434  *   Private data pointer from secondary process, NULL in case of error.
1435  */
1436 struct priv *
1437 mlx5_secondary_data_setup(struct priv *priv)
1438 {
1439         unsigned int port_id = 0;
1440         struct mlx5_secondary_data *sd;
1441         void **tx_queues;
1442         void **rx_queues;
1443         unsigned int nb_tx_queues;
1444         unsigned int nb_rx_queues;
1445         unsigned int i;
1446
1447         /* priv must be valid at this point. */
1448         assert(priv != NULL);
1449         /* priv->dev must also be valid but may point to local memory from
1450          * another process, possibly with the same address and must not
1451          * be dereferenced yet. */
1452         assert(priv->dev != NULL);
1453         /* Determine port ID by finding out where priv comes from. */
1454         while (1) {
1455                 sd = &mlx5_secondary_data[port_id];
1456                 rte_spinlock_lock(&sd->lock);
1457                 /* Primary process? */
1458                 if (sd->primary_priv == priv)
1459                         break;
1460                 /* Secondary process? */
1461                 if (sd->data.dev_private == priv)
1462                         break;
1463                 rte_spinlock_unlock(&sd->lock);
1464                 if (++port_id == RTE_DIM(mlx5_secondary_data))
1465                         port_id = 0;
1466         }
1467         /* Switch to secondary private structure. If private data has already
1468          * been updated by another thread, there is nothing else to do. */
1469         priv = sd->data.dev_private;
1470         if (priv->dev->data == &sd->data)
1471                 goto end;
1472         /* Sanity checks. Secondary private structure is supposed to point
1473          * to local eth_dev, itself still pointing to the shared device data
1474          * structure allocated by the primary process. */
1475         assert(sd->shared_dev_data != &sd->data);
1476         assert(sd->data.nb_tx_queues == 0);
1477         assert(sd->data.tx_queues == NULL);
1478         assert(sd->data.nb_rx_queues == 0);
1479         assert(sd->data.rx_queues == NULL);
1480         assert(priv != sd->primary_priv);
1481         assert(priv->dev->data == sd->shared_dev_data);
1482         assert(priv->txqs_n == 0);
1483         assert(priv->txqs == NULL);
1484         assert(priv->rxqs_n == 0);
1485         assert(priv->rxqs == NULL);
1486         nb_tx_queues = sd->shared_dev_data->nb_tx_queues;
1487         nb_rx_queues = sd->shared_dev_data->nb_rx_queues;
1488         /* Allocate local storage for queues. */
1489         tx_queues = rte_zmalloc("secondary ethdev->tx_queues",
1490                                 sizeof(sd->data.tx_queues[0]) * nb_tx_queues,
1491                                 RTE_CACHE_LINE_SIZE);
1492         rx_queues = rte_zmalloc("secondary ethdev->rx_queues",
1493                                 sizeof(sd->data.rx_queues[0]) * nb_rx_queues,
1494                                 RTE_CACHE_LINE_SIZE);
1495         if (tx_queues == NULL || rx_queues == NULL)
1496                 goto error;
1497         /* Lock to prevent control operations during setup. */
1498         priv_lock(priv);
1499         /* TX queues. */
1500         for (i = 0; i != nb_tx_queues; ++i) {
1501                 struct txq *primary_txq = (*sd->primary_priv->txqs)[i];
1502                 struct txq_ctrl *primary_txq_ctrl;
1503                 struct txq_ctrl *txq_ctrl;
1504
1505                 if (primary_txq == NULL)
1506                         continue;
1507                 primary_txq_ctrl = container_of(primary_txq,
1508                                                 struct txq_ctrl, txq);
1509                 txq_ctrl = rte_calloc_socket("TXQ", 1, sizeof(*txq_ctrl) +
1510                                              (1 << primary_txq->elts_n) *
1511                                              sizeof(struct rte_mbuf *), 0,
1512                                              primary_txq_ctrl->socket);
1513                 if (txq_ctrl != NULL) {
1514                         if (txq_ctrl_setup(priv->dev,
1515                                            txq_ctrl,
1516                                            1 << primary_txq->elts_n,
1517                                            primary_txq_ctrl->socket,
1518                                            NULL) == 0) {
1519                                 txq_ctrl->txq.stats.idx =
1520                                         primary_txq->stats.idx;
1521                                 tx_queues[i] = &txq_ctrl->txq;
1522                                 continue;
1523                         }
1524                         rte_free(txq_ctrl);
1525                 }
1526                 while (i) {
1527                         txq_ctrl = tx_queues[--i];
1528                         txq_cleanup(txq_ctrl);
1529                         rte_free(txq_ctrl);
1530                 }
1531                 goto error;
1532         }
1533         /* RX queues. */
1534         for (i = 0; i != nb_rx_queues; ++i) {
1535                 struct rxq_ctrl *primary_rxq =
1536                         container_of((*sd->primary_priv->rxqs)[i],
1537                                      struct rxq_ctrl, rxq);
1538
1539                 if (primary_rxq == NULL)
1540                         continue;
1541                 /* Not supported yet. */
1542                 rx_queues[i] = NULL;
1543         }
1544         /* Update everything. */
1545         priv->txqs = (void *)tx_queues;
1546         priv->txqs_n = nb_tx_queues;
1547         priv->rxqs = (void *)rx_queues;
1548         priv->rxqs_n = nb_rx_queues;
1549         sd->data.rx_queues = rx_queues;
1550         sd->data.tx_queues = tx_queues;
1551         sd->data.nb_rx_queues = nb_rx_queues;
1552         sd->data.nb_tx_queues = nb_tx_queues;
1553         sd->data.dev_link = sd->shared_dev_data->dev_link;
1554         sd->data.mtu = sd->shared_dev_data->mtu;
1555         memcpy(sd->data.rx_queue_state, sd->shared_dev_data->rx_queue_state,
1556                sizeof(sd->data.rx_queue_state));
1557         memcpy(sd->data.tx_queue_state, sd->shared_dev_data->tx_queue_state,
1558                sizeof(sd->data.tx_queue_state));
1559         sd->data.dev_flags = sd->shared_dev_data->dev_flags;
1560         /* Use local data from now on. */
1561         rte_mb();
1562         priv->dev->data = &sd->data;
1563         rte_mb();
1564         priv_select_tx_function(priv);
1565         priv_select_rx_function(priv);
1566         priv_unlock(priv);
1567 end:
1568         /* More sanity checks. */
1569         assert(priv->dev->data == &sd->data);
1570         rte_spinlock_unlock(&sd->lock);
1571         return priv;
1572 error:
1573         priv_unlock(priv);
1574         rte_free(tx_queues);
1575         rte_free(rx_queues);
1576         rte_spinlock_unlock(&sd->lock);
1577         return NULL;
1578 }
1579
1580 /**
1581  * Configure the TX function to use.
1582  *
1583  * @param priv
1584  *   Pointer to private structure.
1585  */
1586 void
1587 priv_select_tx_function(struct priv *priv)
1588 {
1589         priv->dev->tx_pkt_burst = mlx5_tx_burst;
1590         /* Select appropriate TX function. */
1591         if (priv->mps == MLX5_MPW_ENHANCED) {
1592                 priv->dev->tx_pkt_burst =
1593                         mlx5_tx_burst_empw;
1594                 DEBUG("selected Enhanced MPW TX function");
1595         } else if (priv->mps && priv->txq_inline) {
1596                 priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
1597                 DEBUG("selected MPW inline TX function");
1598         } else if (priv->mps) {
1599                 priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw;
1600                 DEBUG("selected MPW TX function");
1601         }
1602 }
1603
1604 /**
1605  * Configure the RX function to use.
1606  *
1607  * @param priv
1608  *   Pointer to private structure.
1609  */
1610 void
1611 priv_select_rx_function(struct priv *priv)
1612 {
1613         priv->dev->rx_pkt_burst = mlx5_rx_burst;
1614 }