1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2016 6WIND S.A.
3 * Copyright 2016 Mellanox Technologies, Ltd
6 #include <netinet/in.h>
14 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
16 #pragma GCC diagnostic ignored "-Wpedantic"
18 #include <infiniband/verbs.h>
20 #pragma GCC diagnostic error "-Wpedantic"
23 #include <rte_common.h>
24 #include <rte_ether.h>
25 #include <rte_ethdev_driver.h>
27 #include <rte_flow_driver.h>
28 #include <rte_malloc.h>
31 #include <mlx5_glue.h>
32 #include <mlx5_devx_cmds.h>
35 #include "mlx5_defs.h"
37 #include "mlx5_flow.h"
38 #include "mlx5_rxtx.h"
40 /* Dev ops structure defined in mlx5.c */
41 extern const struct eth_dev_ops mlx5_dev_ops;
42 extern const struct eth_dev_ops mlx5_dev_ops_isolate;
44 /** Device flow drivers. */
45 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
46 extern const struct mlx5_flow_driver_ops mlx5_flow_dv_drv_ops;
48 extern const struct mlx5_flow_driver_ops mlx5_flow_verbs_drv_ops;
50 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops;
52 const struct mlx5_flow_driver_ops *flow_drv_ops[] = {
53 [MLX5_FLOW_TYPE_MIN] = &mlx5_flow_null_drv_ops,
54 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
55 [MLX5_FLOW_TYPE_DV] = &mlx5_flow_dv_drv_ops,
57 [MLX5_FLOW_TYPE_VERBS] = &mlx5_flow_verbs_drv_ops,
58 [MLX5_FLOW_TYPE_MAX] = &mlx5_flow_null_drv_ops
63 MLX5_EXPANSION_ROOT_OUTER,
64 MLX5_EXPANSION_ROOT_ETH_VLAN,
65 MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN,
66 MLX5_EXPANSION_OUTER_ETH,
67 MLX5_EXPANSION_OUTER_ETH_VLAN,
68 MLX5_EXPANSION_OUTER_VLAN,
69 MLX5_EXPANSION_OUTER_IPV4,
70 MLX5_EXPANSION_OUTER_IPV4_UDP,
71 MLX5_EXPANSION_OUTER_IPV4_TCP,
72 MLX5_EXPANSION_OUTER_IPV6,
73 MLX5_EXPANSION_OUTER_IPV6_UDP,
74 MLX5_EXPANSION_OUTER_IPV6_TCP,
76 MLX5_EXPANSION_VXLAN_GPE,
80 MLX5_EXPANSION_ETH_VLAN,
83 MLX5_EXPANSION_IPV4_UDP,
84 MLX5_EXPANSION_IPV4_TCP,
86 MLX5_EXPANSION_IPV6_UDP,
87 MLX5_EXPANSION_IPV6_TCP,
90 /** Supported expansion of items. */
91 static const struct rte_flow_expand_node mlx5_support_expansion[] = {
92 [MLX5_EXPANSION_ROOT] = {
93 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
96 .type = RTE_FLOW_ITEM_TYPE_END,
98 [MLX5_EXPANSION_ROOT_OUTER] = {
99 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH,
100 MLX5_EXPANSION_OUTER_IPV4,
101 MLX5_EXPANSION_OUTER_IPV6),
102 .type = RTE_FLOW_ITEM_TYPE_END,
104 [MLX5_EXPANSION_ROOT_ETH_VLAN] = {
105 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH_VLAN),
106 .type = RTE_FLOW_ITEM_TYPE_END,
108 [MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN] = {
109 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH_VLAN),
110 .type = RTE_FLOW_ITEM_TYPE_END,
112 [MLX5_EXPANSION_OUTER_ETH] = {
113 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
114 MLX5_EXPANSION_OUTER_IPV6,
115 MLX5_EXPANSION_MPLS),
116 .type = RTE_FLOW_ITEM_TYPE_ETH,
119 [MLX5_EXPANSION_OUTER_ETH_VLAN] = {
120 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_VLAN),
121 .type = RTE_FLOW_ITEM_TYPE_ETH,
124 [MLX5_EXPANSION_OUTER_VLAN] = {
125 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
126 MLX5_EXPANSION_OUTER_IPV6),
127 .type = RTE_FLOW_ITEM_TYPE_VLAN,
129 [MLX5_EXPANSION_OUTER_IPV4] = {
130 .next = RTE_FLOW_EXPAND_RSS_NEXT
131 (MLX5_EXPANSION_OUTER_IPV4_UDP,
132 MLX5_EXPANSION_OUTER_IPV4_TCP,
135 MLX5_EXPANSION_IPV6),
136 .type = RTE_FLOW_ITEM_TYPE_IPV4,
137 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
138 ETH_RSS_NONFRAG_IPV4_OTHER,
140 [MLX5_EXPANSION_OUTER_IPV4_UDP] = {
141 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
142 MLX5_EXPANSION_VXLAN_GPE),
143 .type = RTE_FLOW_ITEM_TYPE_UDP,
144 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
146 [MLX5_EXPANSION_OUTER_IPV4_TCP] = {
147 .type = RTE_FLOW_ITEM_TYPE_TCP,
148 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
150 [MLX5_EXPANSION_OUTER_IPV6] = {
151 .next = RTE_FLOW_EXPAND_RSS_NEXT
152 (MLX5_EXPANSION_OUTER_IPV6_UDP,
153 MLX5_EXPANSION_OUTER_IPV6_TCP,
155 MLX5_EXPANSION_IPV6),
156 .type = RTE_FLOW_ITEM_TYPE_IPV6,
157 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
158 ETH_RSS_NONFRAG_IPV6_OTHER,
160 [MLX5_EXPANSION_OUTER_IPV6_UDP] = {
161 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
162 MLX5_EXPANSION_VXLAN_GPE),
163 .type = RTE_FLOW_ITEM_TYPE_UDP,
164 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
166 [MLX5_EXPANSION_OUTER_IPV6_TCP] = {
167 .type = RTE_FLOW_ITEM_TYPE_TCP,
168 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
170 [MLX5_EXPANSION_VXLAN] = {
171 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
173 MLX5_EXPANSION_IPV6),
174 .type = RTE_FLOW_ITEM_TYPE_VXLAN,
176 [MLX5_EXPANSION_VXLAN_GPE] = {
177 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
179 MLX5_EXPANSION_IPV6),
180 .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
182 [MLX5_EXPANSION_GRE] = {
183 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4),
184 .type = RTE_FLOW_ITEM_TYPE_GRE,
186 [MLX5_EXPANSION_MPLS] = {
187 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
188 MLX5_EXPANSION_IPV6),
189 .type = RTE_FLOW_ITEM_TYPE_MPLS,
191 [MLX5_EXPANSION_ETH] = {
192 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
193 MLX5_EXPANSION_IPV6),
194 .type = RTE_FLOW_ITEM_TYPE_ETH,
196 [MLX5_EXPANSION_ETH_VLAN] = {
197 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VLAN),
198 .type = RTE_FLOW_ITEM_TYPE_ETH,
200 [MLX5_EXPANSION_VLAN] = {
201 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
202 MLX5_EXPANSION_IPV6),
203 .type = RTE_FLOW_ITEM_TYPE_VLAN,
205 [MLX5_EXPANSION_IPV4] = {
206 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4_UDP,
207 MLX5_EXPANSION_IPV4_TCP),
208 .type = RTE_FLOW_ITEM_TYPE_IPV4,
209 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
210 ETH_RSS_NONFRAG_IPV4_OTHER,
212 [MLX5_EXPANSION_IPV4_UDP] = {
213 .type = RTE_FLOW_ITEM_TYPE_UDP,
214 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
216 [MLX5_EXPANSION_IPV4_TCP] = {
217 .type = RTE_FLOW_ITEM_TYPE_TCP,
218 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
220 [MLX5_EXPANSION_IPV6] = {
221 .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV6_UDP,
222 MLX5_EXPANSION_IPV6_TCP),
223 .type = RTE_FLOW_ITEM_TYPE_IPV6,
224 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
225 ETH_RSS_NONFRAG_IPV6_OTHER,
227 [MLX5_EXPANSION_IPV6_UDP] = {
228 .type = RTE_FLOW_ITEM_TYPE_UDP,
229 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
231 [MLX5_EXPANSION_IPV6_TCP] = {
232 .type = RTE_FLOW_ITEM_TYPE_TCP,
233 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
237 static const struct rte_flow_ops mlx5_flow_ops = {
238 .validate = mlx5_flow_validate,
239 .create = mlx5_flow_create,
240 .destroy = mlx5_flow_destroy,
241 .flush = mlx5_flow_flush,
242 .isolate = mlx5_flow_isolate,
243 .query = mlx5_flow_query,
244 .dev_dump = mlx5_flow_dev_dump,
247 /* Convert FDIR request to Generic flow. */
249 struct rte_flow_attr attr;
250 struct rte_flow_item items[4];
251 struct rte_flow_item_eth l2;
252 struct rte_flow_item_eth l2_mask;
254 struct rte_flow_item_ipv4 ipv4;
255 struct rte_flow_item_ipv6 ipv6;
258 struct rte_flow_item_ipv4 ipv4;
259 struct rte_flow_item_ipv6 ipv6;
262 struct rte_flow_item_udp udp;
263 struct rte_flow_item_tcp tcp;
266 struct rte_flow_item_udp udp;
267 struct rte_flow_item_tcp tcp;
269 struct rte_flow_action actions[2];
270 struct rte_flow_action_queue queue;
273 /* Map of Verbs to Flow priority with 8 Verbs priorities. */
274 static const uint32_t priority_map_3[][MLX5_PRIORITY_MAP_MAX] = {
275 { 0, 1, 2 }, { 2, 3, 4 }, { 5, 6, 7 },
278 /* Map of Verbs to Flow priority with 16 Verbs priorities. */
279 static const uint32_t priority_map_5[][MLX5_PRIORITY_MAP_MAX] = {
280 { 0, 1, 2 }, { 3, 4, 5 }, { 6, 7, 8 },
281 { 9, 10, 11 }, { 12, 13, 14 },
284 /* Tunnel information. */
285 struct mlx5_flow_tunnel_info {
286 uint64_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
287 uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
290 static struct mlx5_flow_tunnel_info tunnels_info[] = {
292 .tunnel = MLX5_FLOW_LAYER_VXLAN,
293 .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
296 .tunnel = MLX5_FLOW_LAYER_GENEVE,
297 .ptype = RTE_PTYPE_TUNNEL_GENEVE | RTE_PTYPE_L4_UDP,
300 .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
301 .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
304 .tunnel = MLX5_FLOW_LAYER_GRE,
305 .ptype = RTE_PTYPE_TUNNEL_GRE,
308 .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
309 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_UDP | RTE_PTYPE_L4_UDP,
312 .tunnel = MLX5_FLOW_LAYER_MPLS,
313 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
316 .tunnel = MLX5_FLOW_LAYER_NVGRE,
317 .ptype = RTE_PTYPE_TUNNEL_NVGRE,
320 .tunnel = MLX5_FLOW_LAYER_IPIP,
321 .ptype = RTE_PTYPE_TUNNEL_IP,
324 .tunnel = MLX5_FLOW_LAYER_IPV6_ENCAP,
325 .ptype = RTE_PTYPE_TUNNEL_IP,
328 .tunnel = MLX5_FLOW_LAYER_GTP,
329 .ptype = RTE_PTYPE_TUNNEL_GTPU,
334 * Translate tag ID to register.
337 * Pointer to the Ethernet device structure.
339 * The feature that request the register.
341 * The request register ID.
343 * Error description in case of any.
346 * The request register on success, a negative errno
347 * value otherwise and rte_errno is set.
350 mlx5_flow_get_reg_id(struct rte_eth_dev *dev,
351 enum mlx5_feature_name feature,
353 struct rte_flow_error *error)
355 struct mlx5_priv *priv = dev->data->dev_private;
356 struct mlx5_dev_config *config = &priv->config;
357 enum modify_reg start_reg;
358 bool skip_mtr_reg = false;
361 case MLX5_HAIRPIN_RX:
363 case MLX5_HAIRPIN_TX:
365 case MLX5_METADATA_RX:
366 switch (config->dv_xmeta_en) {
367 case MLX5_XMETA_MODE_LEGACY:
369 case MLX5_XMETA_MODE_META16:
371 case MLX5_XMETA_MODE_META32:
375 case MLX5_METADATA_TX:
377 case MLX5_METADATA_FDB:
378 switch (config->dv_xmeta_en) {
379 case MLX5_XMETA_MODE_LEGACY:
381 case MLX5_XMETA_MODE_META16:
383 case MLX5_XMETA_MODE_META32:
388 switch (config->dv_xmeta_en) {
389 case MLX5_XMETA_MODE_LEGACY:
391 case MLX5_XMETA_MODE_META16:
393 case MLX5_XMETA_MODE_META32:
399 * If meter color and flow match share one register, flow match
400 * should use the meter color register for match.
402 if (priv->mtr_reg_share)
403 return priv->mtr_color_reg;
405 return priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
408 MLX5_ASSERT(priv->mtr_color_reg != REG_NONE);
409 return priv->mtr_color_reg;
412 * Metadata COPY_MARK register using is in meter suffix sub
413 * flow while with meter. It's safe to share the same register.
415 return priv->mtr_color_reg != REG_C_2 ? REG_C_2 : REG_C_3;
418 * If meter is enable, it will engage the register for color
419 * match and flow match. If meter color match is not using the
420 * REG_C_2, need to skip the REG_C_x be used by meter color
422 * If meter is disable, free to use all available registers.
424 start_reg = priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
425 (priv->mtr_reg_share ? REG_C_3 : REG_C_4);
426 skip_mtr_reg = !!(priv->mtr_en && start_reg == REG_C_2);
427 if (id > (REG_C_7 - start_reg))
428 return rte_flow_error_set(error, EINVAL,
429 RTE_FLOW_ERROR_TYPE_ITEM,
430 NULL, "invalid tag id");
431 if (config->flow_mreg_c[id + start_reg - REG_C_0] == REG_NONE)
432 return rte_flow_error_set(error, ENOTSUP,
433 RTE_FLOW_ERROR_TYPE_ITEM,
434 NULL, "unsupported tag id");
436 * This case means meter is using the REG_C_x great than 2.
437 * Take care not to conflict with meter color REG_C_x.
438 * If the available index REG_C_y >= REG_C_x, skip the
441 if (skip_mtr_reg && config->flow_mreg_c
442 [id + start_reg - REG_C_0] >= priv->mtr_color_reg) {
443 if (config->flow_mreg_c
444 [id + 1 + start_reg - REG_C_0] != REG_NONE)
445 return config->flow_mreg_c
446 [id + 1 + start_reg - REG_C_0];
447 return rte_flow_error_set(error, ENOTSUP,
448 RTE_FLOW_ERROR_TYPE_ITEM,
449 NULL, "unsupported tag id");
451 return config->flow_mreg_c[id + start_reg - REG_C_0];
454 return rte_flow_error_set(error, EINVAL,
455 RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
456 NULL, "invalid feature name");
460 * Check extensive flow metadata register support.
463 * Pointer to rte_eth_dev structure.
466 * True if device supports extensive flow metadata register, otherwise false.
469 mlx5_flow_ext_mreg_supported(struct rte_eth_dev *dev)
471 struct mlx5_priv *priv = dev->data->dev_private;
472 struct mlx5_dev_config *config = &priv->config;
475 * Having available reg_c can be regarded inclusively as supporting
476 * extensive flow metadata register, which could mean,
477 * - metadata register copy action by modify header.
478 * - 16 modify header actions is supported.
479 * - reg_c's are preserved across different domain (FDB and NIC) on
480 * packet loopback by flow lookup miss.
482 return config->flow_mreg_c[2] != REG_NONE;
486 * Discover the maximum number of priority available.
489 * Pointer to the Ethernet device structure.
492 * number of supported flow priority on success, a negative errno
493 * value otherwise and rte_errno is set.
496 mlx5_flow_discover_priorities(struct rte_eth_dev *dev)
498 struct mlx5_priv *priv = dev->data->dev_private;
500 struct ibv_flow_attr attr;
501 struct ibv_flow_spec_eth eth;
502 struct ibv_flow_spec_action_drop drop;
506 .port = (uint8_t)priv->ibv_port,
509 .type = IBV_FLOW_SPEC_ETH,
510 .size = sizeof(struct ibv_flow_spec_eth),
513 .size = sizeof(struct ibv_flow_spec_action_drop),
514 .type = IBV_FLOW_SPEC_ACTION_DROP,
517 struct ibv_flow *flow;
518 struct mlx5_hrxq *drop = mlx5_hrxq_drop_new(dev);
519 uint16_t vprio[] = { 8, 16 };
527 for (i = 0; i != RTE_DIM(vprio); i++) {
528 flow_attr.attr.priority = vprio[i] - 1;
529 flow = mlx5_glue->create_flow(drop->qp, &flow_attr.attr);
532 claim_zero(mlx5_glue->destroy_flow(flow));
535 mlx5_hrxq_drop_release(dev);
538 priority = RTE_DIM(priority_map_3);
541 priority = RTE_DIM(priority_map_5);
546 "port %u verbs maximum priority: %d expected 8/16",
547 dev->data->port_id, priority);
550 DRV_LOG(INFO, "port %u flow maximum priority: %d",
551 dev->data->port_id, priority);
556 * Adjust flow priority based on the highest layer and the request priority.
559 * Pointer to the Ethernet device structure.
560 * @param[in] priority
561 * The rule base priority.
562 * @param[in] subpriority
563 * The priority based on the items.
568 uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
569 uint32_t subpriority)
572 struct mlx5_priv *priv = dev->data->dev_private;
574 switch (priv->config.flow_prio) {
575 case RTE_DIM(priority_map_3):
576 res = priority_map_3[priority][subpriority];
578 case RTE_DIM(priority_map_5):
579 res = priority_map_5[priority][subpriority];
586 * Verify the @p item specifications (spec, last, mask) are compatible with the
590 * Item specification.
592 * @p item->mask or flow default bit-masks.
593 * @param[in] nic_mask
594 * Bit-masks covering supported fields by the NIC to compare with user mask.
596 * Bit-masks size in bytes.
598 * Pointer to error structure.
601 * 0 on success, a negative errno value otherwise and rte_errno is set.
604 mlx5_flow_item_acceptable(const struct rte_flow_item *item,
606 const uint8_t *nic_mask,
608 struct rte_flow_error *error)
612 MLX5_ASSERT(nic_mask);
613 for (i = 0; i < size; ++i)
614 if ((nic_mask[i] | mask[i]) != nic_mask[i])
615 return rte_flow_error_set(error, ENOTSUP,
616 RTE_FLOW_ERROR_TYPE_ITEM,
618 "mask enables non supported"
620 if (!item->spec && (item->mask || item->last))
621 return rte_flow_error_set(error, EINVAL,
622 RTE_FLOW_ERROR_TYPE_ITEM, item,
623 "mask/last without a spec is not"
625 if (item->spec && item->last) {
631 for (i = 0; i < size; ++i) {
632 spec[i] = ((const uint8_t *)item->spec)[i] & mask[i];
633 last[i] = ((const uint8_t *)item->last)[i] & mask[i];
635 ret = memcmp(spec, last, size);
637 return rte_flow_error_set(error, EINVAL,
638 RTE_FLOW_ERROR_TYPE_ITEM,
640 "range is not valid");
646 * Adjust the hash fields according to the @p flow information.
648 * @param[in] dev_flow.
649 * Pointer to the mlx5_flow.
651 * 1 when the hash field is for a tunnel item.
652 * @param[in] layer_types
654 * @param[in] hash_fields
658 * The hash fields that should be used.
661 mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow,
662 int tunnel __rte_unused, uint64_t layer_types,
663 uint64_t hash_fields)
665 struct rte_flow *flow = dev_flow->flow;
666 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
667 int rss_request_inner = flow->rss.level >= 2;
669 /* Check RSS hash level for tunnel. */
670 if (tunnel && rss_request_inner)
671 hash_fields |= IBV_RX_HASH_INNER;
672 else if (tunnel || rss_request_inner)
675 /* Check if requested layer matches RSS hash fields. */
676 if (!(flow->rss.types & layer_types))
682 * Lookup and set the ptype in the data Rx part. A single Ptype can be used,
683 * if several tunnel rules are used on this queue, the tunnel ptype will be
687 * Rx queue to update.
690 flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
693 uint32_t tunnel_ptype = 0;
695 /* Look up for the ptype to use. */
696 for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
697 if (!rxq_ctrl->flow_tunnels_n[i])
700 tunnel_ptype = tunnels_info[i].ptype;
706 rxq_ctrl->rxq.tunnel = tunnel_ptype;
710 * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the devive
714 * Pointer to the Ethernet device structure.
716 * Pointer to flow structure.
717 * @param[in] dev_handle
718 * Pointer to device flow handle structure.
721 flow_drv_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow,
722 struct mlx5_flow_handle *dev_handle)
724 struct mlx5_priv *priv = dev->data->dev_private;
725 const int mark = dev_handle->mark;
726 const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
729 for (i = 0; i != flow->rss.queue_num; ++i) {
730 int idx = (*flow->rss.queue)[i];
731 struct mlx5_rxq_ctrl *rxq_ctrl =
732 container_of((*priv->rxqs)[idx],
733 struct mlx5_rxq_ctrl, rxq);
736 * To support metadata register copy on Tx loopback,
737 * this must be always enabled (metadata may arive
738 * from other port - not from local flows only.
740 if (priv->config.dv_flow_en &&
741 priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
742 mlx5_flow_ext_mreg_supported(dev)) {
743 rxq_ctrl->rxq.mark = 1;
744 rxq_ctrl->flow_mark_n = 1;
746 rxq_ctrl->rxq.mark = 1;
747 rxq_ctrl->flow_mark_n++;
752 /* Increase the counter matching the flow. */
753 for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
754 if ((tunnels_info[j].tunnel &
755 dev_handle->layers) ==
756 tunnels_info[j].tunnel) {
757 rxq_ctrl->flow_tunnels_n[j]++;
761 flow_rxq_tunnel_ptype_update(rxq_ctrl);
767 * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) for a flow
770 * Pointer to the Ethernet device structure.
772 * Pointer to flow structure.
775 flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
777 struct mlx5_priv *priv = dev->data->dev_private;
779 struct mlx5_flow_handle *dev_handle;
781 SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
782 handle_idx, dev_handle, next)
783 flow_drv_rxq_flags_set(dev, flow, dev_handle);
787 * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
788 * device flow if no other flow uses it with the same kind of request.
791 * Pointer to Ethernet device.
793 * Pointer to flow structure.
794 * @param[in] dev_handle
795 * Pointer to the device flow handle structure.
798 flow_drv_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow,
799 struct mlx5_flow_handle *dev_handle)
801 struct mlx5_priv *priv = dev->data->dev_private;
802 const int mark = dev_handle->mark;
803 const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
806 MLX5_ASSERT(dev->data->dev_started);
807 for (i = 0; i != flow->rss.queue_num; ++i) {
808 int idx = (*flow->rss.queue)[i];
809 struct mlx5_rxq_ctrl *rxq_ctrl =
810 container_of((*priv->rxqs)[idx],
811 struct mlx5_rxq_ctrl, rxq);
813 if (priv->config.dv_flow_en &&
814 priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
815 mlx5_flow_ext_mreg_supported(dev)) {
816 rxq_ctrl->rxq.mark = 1;
817 rxq_ctrl->flow_mark_n = 1;
819 rxq_ctrl->flow_mark_n--;
820 rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
825 /* Decrease the counter matching the flow. */
826 for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
827 if ((tunnels_info[j].tunnel &
828 dev_handle->layers) ==
829 tunnels_info[j].tunnel) {
830 rxq_ctrl->flow_tunnels_n[j]--;
834 flow_rxq_tunnel_ptype_update(rxq_ctrl);
840 * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
841 * @p flow if no other flow uses it with the same kind of request.
844 * Pointer to Ethernet device.
846 * Pointer to the flow.
849 flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
851 struct mlx5_priv *priv = dev->data->dev_private;
853 struct mlx5_flow_handle *dev_handle;
855 SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
856 handle_idx, dev_handle, next)
857 flow_drv_rxq_flags_trim(dev, flow, dev_handle);
861 * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
864 * Pointer to Ethernet device.
867 flow_rxq_flags_clear(struct rte_eth_dev *dev)
869 struct mlx5_priv *priv = dev->data->dev_private;
872 for (i = 0; i != priv->rxqs_n; ++i) {
873 struct mlx5_rxq_ctrl *rxq_ctrl;
876 if (!(*priv->rxqs)[i])
878 rxq_ctrl = container_of((*priv->rxqs)[i],
879 struct mlx5_rxq_ctrl, rxq);
880 rxq_ctrl->flow_mark_n = 0;
881 rxq_ctrl->rxq.mark = 0;
882 for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
883 rxq_ctrl->flow_tunnels_n[j] = 0;
884 rxq_ctrl->rxq.tunnel = 0;
889 * return a pointer to the desired action in the list of actions.
892 * The list of actions to search the action in.
894 * The action to find.
897 * Pointer to the action in the list, if found. NULL otherwise.
899 const struct rte_flow_action *
900 mlx5_flow_find_action(const struct rte_flow_action *actions,
901 enum rte_flow_action_type action)
905 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
906 if (actions->type == action)
912 * Validate the flag action.
914 * @param[in] action_flags
915 * Bit-fields that holds the actions detected until now.
917 * Attributes of flow that includes this action.
919 * Pointer to error structure.
922 * 0 on success, a negative errno value otherwise and rte_errno is set.
925 mlx5_flow_validate_action_flag(uint64_t action_flags,
926 const struct rte_flow_attr *attr,
927 struct rte_flow_error *error)
929 if (action_flags & MLX5_FLOW_ACTION_MARK)
930 return rte_flow_error_set(error, EINVAL,
931 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
932 "can't mark and flag in same flow");
933 if (action_flags & MLX5_FLOW_ACTION_FLAG)
934 return rte_flow_error_set(error, EINVAL,
935 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
937 " actions in same flow");
939 return rte_flow_error_set(error, ENOTSUP,
940 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
941 "flag action not supported for "
947 * Validate the mark action.
950 * Pointer to the queue action.
951 * @param[in] action_flags
952 * Bit-fields that holds the actions detected until now.
954 * Attributes of flow that includes this action.
956 * Pointer to error structure.
959 * 0 on success, a negative errno value otherwise and rte_errno is set.
962 mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
963 uint64_t action_flags,
964 const struct rte_flow_attr *attr,
965 struct rte_flow_error *error)
967 const struct rte_flow_action_mark *mark = action->conf;
970 return rte_flow_error_set(error, EINVAL,
971 RTE_FLOW_ERROR_TYPE_ACTION,
973 "configuration cannot be null");
974 if (mark->id >= MLX5_FLOW_MARK_MAX)
975 return rte_flow_error_set(error, EINVAL,
976 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
978 "mark id must in 0 <= id < "
979 RTE_STR(MLX5_FLOW_MARK_MAX));
980 if (action_flags & MLX5_FLOW_ACTION_FLAG)
981 return rte_flow_error_set(error, EINVAL,
982 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
983 "can't flag and mark in same flow");
984 if (action_flags & MLX5_FLOW_ACTION_MARK)
985 return rte_flow_error_set(error, EINVAL,
986 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
987 "can't have 2 mark actions in same"
990 return rte_flow_error_set(error, ENOTSUP,
991 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
992 "mark action not supported for "
998 * Validate the drop action.
1000 * @param[in] action_flags
1001 * Bit-fields that holds the actions detected until now.
1003 * Attributes of flow that includes this action.
1005 * Pointer to error structure.
1008 * 0 on success, a negative errno value otherwise and rte_errno is set.
1011 mlx5_flow_validate_action_drop(uint64_t action_flags __rte_unused,
1012 const struct rte_flow_attr *attr,
1013 struct rte_flow_error *error)
1016 return rte_flow_error_set(error, ENOTSUP,
1017 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1018 "drop action not supported for "
1024 * Validate the queue action.
1027 * Pointer to the queue action.
1028 * @param[in] action_flags
1029 * Bit-fields that holds the actions detected until now.
1031 * Pointer to the Ethernet device structure.
1033 * Attributes of flow that includes this action.
1035 * Pointer to error structure.
1038 * 0 on success, a negative errno value otherwise and rte_errno is set.
1041 mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
1042 uint64_t action_flags,
1043 struct rte_eth_dev *dev,
1044 const struct rte_flow_attr *attr,
1045 struct rte_flow_error *error)
1047 struct mlx5_priv *priv = dev->data->dev_private;
1048 const struct rte_flow_action_queue *queue = action->conf;
1050 if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1051 return rte_flow_error_set(error, EINVAL,
1052 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1053 "can't have 2 fate actions in"
1056 return rte_flow_error_set(error, EINVAL,
1057 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1058 NULL, "No Rx queues configured");
1059 if (queue->index >= priv->rxqs_n)
1060 return rte_flow_error_set(error, EINVAL,
1061 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1063 "queue index out of range");
1064 if (!(*priv->rxqs)[queue->index])
1065 return rte_flow_error_set(error, EINVAL,
1066 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1068 "queue is not configured");
1070 return rte_flow_error_set(error, ENOTSUP,
1071 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1072 "queue action not supported for "
1078 * Validate the rss action.
1081 * Pointer to the queue action.
1082 * @param[in] action_flags
1083 * Bit-fields that holds the actions detected until now.
1085 * Pointer to the Ethernet device structure.
1087 * Attributes of flow that includes this action.
1088 * @param[in] item_flags
1089 * Items that were detected.
1091 * Pointer to error structure.
1094 * 0 on success, a negative errno value otherwise and rte_errno is set.
1097 mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
1098 uint64_t action_flags,
1099 struct rte_eth_dev *dev,
1100 const struct rte_flow_attr *attr,
1101 uint64_t item_flags,
1102 struct rte_flow_error *error)
1104 struct mlx5_priv *priv = dev->data->dev_private;
1105 const struct rte_flow_action_rss *rss = action->conf;
1106 int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1109 if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1110 return rte_flow_error_set(error, EINVAL,
1111 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1112 "can't have 2 fate actions"
1114 if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
1115 rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
1116 return rte_flow_error_set(error, ENOTSUP,
1117 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1119 "RSS hash function not supported");
1120 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1125 return rte_flow_error_set(error, ENOTSUP,
1126 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1128 "tunnel RSS is not supported");
1129 /* allow RSS key_len 0 in case of NULL (default) RSS key. */
1130 if (rss->key_len == 0 && rss->key != NULL)
1131 return rte_flow_error_set(error, ENOTSUP,
1132 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1134 "RSS hash key length 0");
1135 if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
1136 return rte_flow_error_set(error, ENOTSUP,
1137 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1139 "RSS hash key too small");
1140 if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
1141 return rte_flow_error_set(error, ENOTSUP,
1142 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1144 "RSS hash key too large");
1145 if (rss->queue_num > priv->config.ind_table_max_size)
1146 return rte_flow_error_set(error, ENOTSUP,
1147 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1149 "number of queues too large");
1150 if (rss->types & MLX5_RSS_HF_MASK)
1151 return rte_flow_error_set(error, ENOTSUP,
1152 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1154 "some RSS protocols are not"
1156 if ((rss->types & (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY)) &&
1157 !(rss->types & ETH_RSS_IP))
1158 return rte_flow_error_set(error, EINVAL,
1159 RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1160 "L3 partial RSS requested but L3 RSS"
1161 " type not specified");
1162 if ((rss->types & (ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)) &&
1163 !(rss->types & (ETH_RSS_UDP | ETH_RSS_TCP)))
1164 return rte_flow_error_set(error, EINVAL,
1165 RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1166 "L4 partial RSS requested but L4 RSS"
1167 " type not specified");
1169 return rte_flow_error_set(error, EINVAL,
1170 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1171 NULL, "No Rx queues configured");
1172 if (!rss->queue_num)
1173 return rte_flow_error_set(error, EINVAL,
1174 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1175 NULL, "No queues configured");
1176 for (i = 0; i != rss->queue_num; ++i) {
1177 if (rss->queue[i] >= priv->rxqs_n)
1178 return rte_flow_error_set
1180 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1181 &rss->queue[i], "queue index out of range");
1182 if (!(*priv->rxqs)[rss->queue[i]])
1183 return rte_flow_error_set
1184 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1185 &rss->queue[i], "queue is not configured");
1188 return rte_flow_error_set(error, ENOTSUP,
1189 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1190 "rss action not supported for "
1192 if (rss->level > 1 && !tunnel)
1193 return rte_flow_error_set(error, EINVAL,
1194 RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1195 "inner RSS is not supported for "
1196 "non-tunnel flows");
1201 * Validate the count action.
1204 * Pointer to the Ethernet device structure.
1206 * Attributes of flow that includes this action.
1208 * Pointer to error structure.
1211 * 0 on success, a negative errno value otherwise and rte_errno is set.
1214 mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
1215 const struct rte_flow_attr *attr,
1216 struct rte_flow_error *error)
1219 return rte_flow_error_set(error, ENOTSUP,
1220 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1221 "count action not supported for "
1227 * Verify the @p attributes will be correctly understood by the NIC and store
1228 * them in the @p flow if everything is correct.
1231 * Pointer to the Ethernet device structure.
1232 * @param[in] attributes
1233 * Pointer to flow attributes
1235 * Pointer to error structure.
1238 * 0 on success, a negative errno value otherwise and rte_errno is set.
1241 mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
1242 const struct rte_flow_attr *attributes,
1243 struct rte_flow_error *error)
1245 struct mlx5_priv *priv = dev->data->dev_private;
1246 uint32_t priority_max = priv->config.flow_prio - 1;
1248 if (attributes->group)
1249 return rte_flow_error_set(error, ENOTSUP,
1250 RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
1251 NULL, "groups is not supported");
1252 if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
1253 attributes->priority >= priority_max)
1254 return rte_flow_error_set(error, ENOTSUP,
1255 RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
1256 NULL, "priority out of range");
1257 if (attributes->egress)
1258 return rte_flow_error_set(error, ENOTSUP,
1259 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1260 "egress is not supported");
1261 if (attributes->transfer && !priv->config.dv_esw_en)
1262 return rte_flow_error_set(error, ENOTSUP,
1263 RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
1264 NULL, "transfer is not supported");
1265 if (!attributes->ingress)
1266 return rte_flow_error_set(error, EINVAL,
1267 RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
1269 "ingress attribute is mandatory");
1274 * Validate ICMP6 item.
1277 * Item specification.
1278 * @param[in] item_flags
1279 * Bit-fields that holds the items detected until now.
1281 * Pointer to error structure.
1284 * 0 on success, a negative errno value otherwise and rte_errno is set.
1287 mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
1288 uint64_t item_flags,
1289 uint8_t target_protocol,
1290 struct rte_flow_error *error)
1292 const struct rte_flow_item_icmp6 *mask = item->mask;
1293 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1294 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
1295 MLX5_FLOW_LAYER_OUTER_L3_IPV6;
1296 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1297 MLX5_FLOW_LAYER_OUTER_L4;
1300 if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMPV6)
1301 return rte_flow_error_set(error, EINVAL,
1302 RTE_FLOW_ERROR_TYPE_ITEM, item,
1303 "protocol filtering not compatible"
1304 " with ICMP6 layer");
1305 if (!(item_flags & l3m))
1306 return rte_flow_error_set(error, EINVAL,
1307 RTE_FLOW_ERROR_TYPE_ITEM, item,
1308 "IPv6 is mandatory to filter on"
1310 if (item_flags & l4m)
1311 return rte_flow_error_set(error, EINVAL,
1312 RTE_FLOW_ERROR_TYPE_ITEM, item,
1313 "multiple L4 layers not supported");
1315 mask = &rte_flow_item_icmp6_mask;
1316 ret = mlx5_flow_item_acceptable
1317 (item, (const uint8_t *)mask,
1318 (const uint8_t *)&rte_flow_item_icmp6_mask,
1319 sizeof(struct rte_flow_item_icmp6), error);
1326 * Validate ICMP item.
1329 * Item specification.
1330 * @param[in] item_flags
1331 * Bit-fields that holds the items detected until now.
1333 * Pointer to error structure.
1336 * 0 on success, a negative errno value otherwise and rte_errno is set.
1339 mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
1340 uint64_t item_flags,
1341 uint8_t target_protocol,
1342 struct rte_flow_error *error)
1344 const struct rte_flow_item_icmp *mask = item->mask;
1345 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1346 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
1347 MLX5_FLOW_LAYER_OUTER_L3_IPV4;
1348 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1349 MLX5_FLOW_LAYER_OUTER_L4;
1352 if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMP)
1353 return rte_flow_error_set(error, EINVAL,
1354 RTE_FLOW_ERROR_TYPE_ITEM, item,
1355 "protocol filtering not compatible"
1356 " with ICMP layer");
1357 if (!(item_flags & l3m))
1358 return rte_flow_error_set(error, EINVAL,
1359 RTE_FLOW_ERROR_TYPE_ITEM, item,
1360 "IPv4 is mandatory to filter"
1362 if (item_flags & l4m)
1363 return rte_flow_error_set(error, EINVAL,
1364 RTE_FLOW_ERROR_TYPE_ITEM, item,
1365 "multiple L4 layers not supported");
1367 mask = &rte_flow_item_icmp_mask;
1368 ret = mlx5_flow_item_acceptable
1369 (item, (const uint8_t *)mask,
1370 (const uint8_t *)&rte_flow_item_icmp_mask,
1371 sizeof(struct rte_flow_item_icmp), error);
1378 * Validate Ethernet item.
1381 * Item specification.
1382 * @param[in] item_flags
1383 * Bit-fields that holds the items detected until now.
1385 * Pointer to error structure.
1388 * 0 on success, a negative errno value otherwise and rte_errno is set.
1391 mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
1392 uint64_t item_flags,
1393 struct rte_flow_error *error)
1395 const struct rte_flow_item_eth *mask = item->mask;
1396 const struct rte_flow_item_eth nic_mask = {
1397 .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1398 .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1399 .type = RTE_BE16(0xffff),
1402 int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1403 const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
1404 MLX5_FLOW_LAYER_OUTER_L2;
1406 if (item_flags & ethm)
1407 return rte_flow_error_set(error, ENOTSUP,
1408 RTE_FLOW_ERROR_TYPE_ITEM, item,
1409 "multiple L2 layers not supported");
1410 if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_L3)) ||
1411 (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3)))
1412 return rte_flow_error_set(error, EINVAL,
1413 RTE_FLOW_ERROR_TYPE_ITEM, item,
1414 "L2 layer should not follow "
1416 if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)) ||
1417 (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_VLAN)))
1418 return rte_flow_error_set(error, EINVAL,
1419 RTE_FLOW_ERROR_TYPE_ITEM, item,
1420 "L2 layer should not follow VLAN");
1422 mask = &rte_flow_item_eth_mask;
1423 ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1424 (const uint8_t *)&nic_mask,
1425 sizeof(struct rte_flow_item_eth),
1431 * Validate VLAN item.
1434 * Item specification.
1435 * @param[in] item_flags
1436 * Bit-fields that holds the items detected until now.
1438 * Ethernet device flow is being created on.
1440 * Pointer to error structure.
1443 * 0 on success, a negative errno value otherwise and rte_errno is set.
1446 mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
1447 uint64_t item_flags,
1448 struct rte_eth_dev *dev,
1449 struct rte_flow_error *error)
1451 const struct rte_flow_item_vlan *spec = item->spec;
1452 const struct rte_flow_item_vlan *mask = item->mask;
1453 const struct rte_flow_item_vlan nic_mask = {
1454 .tci = RTE_BE16(UINT16_MAX),
1455 .inner_type = RTE_BE16(UINT16_MAX),
1457 uint16_t vlan_tag = 0;
1458 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1460 const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
1461 MLX5_FLOW_LAYER_INNER_L4) :
1462 (MLX5_FLOW_LAYER_OUTER_L3 |
1463 MLX5_FLOW_LAYER_OUTER_L4);
1464 const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
1465 MLX5_FLOW_LAYER_OUTER_VLAN;
1467 if (item_flags & vlanm)
1468 return rte_flow_error_set(error, EINVAL,
1469 RTE_FLOW_ERROR_TYPE_ITEM, item,
1470 "multiple VLAN layers not supported");
1471 else if ((item_flags & l34m) != 0)
1472 return rte_flow_error_set(error, EINVAL,
1473 RTE_FLOW_ERROR_TYPE_ITEM, item,
1474 "VLAN cannot follow L3/L4 layer");
1476 mask = &rte_flow_item_vlan_mask;
1477 ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1478 (const uint8_t *)&nic_mask,
1479 sizeof(struct rte_flow_item_vlan),
1483 if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
1484 struct mlx5_priv *priv = dev->data->dev_private;
1486 if (priv->vmwa_context) {
1488 * Non-NULL context means we have a virtual machine
1489 * and SR-IOV enabled, we have to create VLAN interface
1490 * to make hypervisor to setup E-Switch vport
1491 * context correctly. We avoid creating the multiple
1492 * VLAN interfaces, so we cannot support VLAN tag mask.
1494 return rte_flow_error_set(error, EINVAL,
1495 RTE_FLOW_ERROR_TYPE_ITEM,
1497 "VLAN tag mask is not"
1498 " supported in virtual"
1503 vlan_tag = spec->tci;
1504 vlan_tag &= mask->tci;
1507 * From verbs perspective an empty VLAN is equivalent
1508 * to a packet without VLAN layer.
1511 return rte_flow_error_set(error, EINVAL,
1512 RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
1514 "VLAN cannot be empty");
1519 * Validate IPV4 item.
1522 * Item specification.
1523 * @param[in] item_flags
1524 * Bit-fields that holds the items detected until now.
1525 * @param[in] acc_mask
1526 * Acceptable mask, if NULL default internal default mask
1527 * will be used to check whether item fields are supported.
1529 * Pointer to error structure.
1532 * 0 on success, a negative errno value otherwise and rte_errno is set.
1535 mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
1536 uint64_t item_flags,
1538 uint16_t ether_type,
1539 const struct rte_flow_item_ipv4 *acc_mask,
1540 struct rte_flow_error *error)
1542 const struct rte_flow_item_ipv4 *mask = item->mask;
1543 const struct rte_flow_item_ipv4 *spec = item->spec;
1544 const struct rte_flow_item_ipv4 nic_mask = {
1546 .src_addr = RTE_BE32(0xffffffff),
1547 .dst_addr = RTE_BE32(0xffffffff),
1548 .type_of_service = 0xff,
1549 .next_proto_id = 0xff,
1552 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1553 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
1554 MLX5_FLOW_LAYER_OUTER_L3;
1555 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1556 MLX5_FLOW_LAYER_OUTER_L4;
1558 uint8_t next_proto = 0xFF;
1559 const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
1560 MLX5_FLOW_LAYER_OUTER_VLAN |
1561 MLX5_FLOW_LAYER_INNER_VLAN);
1563 if ((last_item & l2_vlan) && ether_type &&
1564 ether_type != RTE_ETHER_TYPE_IPV4)
1565 return rte_flow_error_set(error, EINVAL,
1566 RTE_FLOW_ERROR_TYPE_ITEM, item,
1567 "IPv4 cannot follow L2/VLAN layer "
1568 "which ether type is not IPv4");
1569 if (item_flags & MLX5_FLOW_LAYER_IPIP) {
1571 next_proto = mask->hdr.next_proto_id &
1572 spec->hdr.next_proto_id;
1573 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
1574 return rte_flow_error_set(error, EINVAL,
1575 RTE_FLOW_ERROR_TYPE_ITEM,
1580 if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP)
1581 return rte_flow_error_set(error, EINVAL,
1582 RTE_FLOW_ERROR_TYPE_ITEM, item,
1583 "wrong tunnel type - IPv6 specified "
1584 "but IPv4 item provided");
1585 if (item_flags & l3m)
1586 return rte_flow_error_set(error, ENOTSUP,
1587 RTE_FLOW_ERROR_TYPE_ITEM, item,
1588 "multiple L3 layers not supported");
1589 else if (item_flags & l4m)
1590 return rte_flow_error_set(error, EINVAL,
1591 RTE_FLOW_ERROR_TYPE_ITEM, item,
1592 "L3 cannot follow an L4 layer.");
1593 else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
1594 !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
1595 return rte_flow_error_set(error, EINVAL,
1596 RTE_FLOW_ERROR_TYPE_ITEM, item,
1597 "L3 cannot follow an NVGRE layer.");
1599 mask = &rte_flow_item_ipv4_mask;
1600 else if (mask->hdr.next_proto_id != 0 &&
1601 mask->hdr.next_proto_id != 0xff)
1602 return rte_flow_error_set(error, EINVAL,
1603 RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
1604 "partial mask is not supported"
1606 ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1607 acc_mask ? (const uint8_t *)acc_mask
1608 : (const uint8_t *)&nic_mask,
1609 sizeof(struct rte_flow_item_ipv4),
1617 * Validate IPV6 item.
1620 * Item specification.
1621 * @param[in] item_flags
1622 * Bit-fields that holds the items detected until now.
1623 * @param[in] acc_mask
1624 * Acceptable mask, if NULL default internal default mask
1625 * will be used to check whether item fields are supported.
1627 * Pointer to error structure.
1630 * 0 on success, a negative errno value otherwise and rte_errno is set.
1633 mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
1634 uint64_t item_flags,
1636 uint16_t ether_type,
1637 const struct rte_flow_item_ipv6 *acc_mask,
1638 struct rte_flow_error *error)
1640 const struct rte_flow_item_ipv6 *mask = item->mask;
1641 const struct rte_flow_item_ipv6 *spec = item->spec;
1642 const struct rte_flow_item_ipv6 nic_mask = {
1645 "\xff\xff\xff\xff\xff\xff\xff\xff"
1646 "\xff\xff\xff\xff\xff\xff\xff\xff",
1648 "\xff\xff\xff\xff\xff\xff\xff\xff"
1649 "\xff\xff\xff\xff\xff\xff\xff\xff",
1650 .vtc_flow = RTE_BE32(0xffffffff),
1654 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1655 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
1656 MLX5_FLOW_LAYER_OUTER_L3;
1657 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1658 MLX5_FLOW_LAYER_OUTER_L4;
1660 uint8_t next_proto = 0xFF;
1661 const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
1662 MLX5_FLOW_LAYER_OUTER_VLAN |
1663 MLX5_FLOW_LAYER_INNER_VLAN);
1665 if ((last_item & l2_vlan) && ether_type &&
1666 ether_type != RTE_ETHER_TYPE_IPV6)
1667 return rte_flow_error_set(error, EINVAL,
1668 RTE_FLOW_ERROR_TYPE_ITEM, item,
1669 "IPv6 cannot follow L2/VLAN layer "
1670 "which ether type is not IPv6");
1671 if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP) {
1673 next_proto = mask->hdr.proto & spec->hdr.proto;
1674 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
1675 return rte_flow_error_set(error, EINVAL,
1676 RTE_FLOW_ERROR_TYPE_ITEM,
1681 if (item_flags & MLX5_FLOW_LAYER_IPIP)
1682 return rte_flow_error_set(error, EINVAL,
1683 RTE_FLOW_ERROR_TYPE_ITEM, item,
1684 "wrong tunnel type - IPv4 specified "
1685 "but IPv6 item provided");
1686 if (item_flags & l3m)
1687 return rte_flow_error_set(error, ENOTSUP,
1688 RTE_FLOW_ERROR_TYPE_ITEM, item,
1689 "multiple L3 layers not supported");
1690 else if (item_flags & l4m)
1691 return rte_flow_error_set(error, EINVAL,
1692 RTE_FLOW_ERROR_TYPE_ITEM, item,
1693 "L3 cannot follow an L4 layer.");
1694 else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
1695 !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
1696 return rte_flow_error_set(error, EINVAL,
1697 RTE_FLOW_ERROR_TYPE_ITEM, item,
1698 "L3 cannot follow an NVGRE layer.");
1700 mask = &rte_flow_item_ipv6_mask;
1701 ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1702 acc_mask ? (const uint8_t *)acc_mask
1703 : (const uint8_t *)&nic_mask,
1704 sizeof(struct rte_flow_item_ipv6),
1712 * Validate UDP item.
1715 * Item specification.
1716 * @param[in] item_flags
1717 * Bit-fields that holds the items detected until now.
1718 * @param[in] target_protocol
1719 * The next protocol in the previous item.
1720 * @param[in] flow_mask
1721 * mlx5 flow-specific (DV, verbs, etc.) supported header fields mask.
1723 * Pointer to error structure.
1726 * 0 on success, a negative errno value otherwise and rte_errno is set.
1729 mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
1730 uint64_t item_flags,
1731 uint8_t target_protocol,
1732 struct rte_flow_error *error)
1734 const struct rte_flow_item_udp *mask = item->mask;
1735 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1736 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
1737 MLX5_FLOW_LAYER_OUTER_L3;
1738 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1739 MLX5_FLOW_LAYER_OUTER_L4;
1742 if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
1743 return rte_flow_error_set(error, EINVAL,
1744 RTE_FLOW_ERROR_TYPE_ITEM, item,
1745 "protocol filtering not compatible"
1747 if (!(item_flags & l3m))
1748 return rte_flow_error_set(error, EINVAL,
1749 RTE_FLOW_ERROR_TYPE_ITEM, item,
1750 "L3 is mandatory to filter on L4");
1751 if (item_flags & l4m)
1752 return rte_flow_error_set(error, EINVAL,
1753 RTE_FLOW_ERROR_TYPE_ITEM, item,
1754 "multiple L4 layers not supported");
1756 mask = &rte_flow_item_udp_mask;
1757 ret = mlx5_flow_item_acceptable
1758 (item, (const uint8_t *)mask,
1759 (const uint8_t *)&rte_flow_item_udp_mask,
1760 sizeof(struct rte_flow_item_udp), error);
1767 * Validate TCP item.
1770 * Item specification.
1771 * @param[in] item_flags
1772 * Bit-fields that holds the items detected until now.
1773 * @param[in] target_protocol
1774 * The next protocol in the previous item.
1776 * Pointer to error structure.
1779 * 0 on success, a negative errno value otherwise and rte_errno is set.
1782 mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
1783 uint64_t item_flags,
1784 uint8_t target_protocol,
1785 const struct rte_flow_item_tcp *flow_mask,
1786 struct rte_flow_error *error)
1788 const struct rte_flow_item_tcp *mask = item->mask;
1789 const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1790 const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
1791 MLX5_FLOW_LAYER_OUTER_L3;
1792 const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1793 MLX5_FLOW_LAYER_OUTER_L4;
1796 MLX5_ASSERT(flow_mask);
1797 if (target_protocol != 0xff && target_protocol != IPPROTO_TCP)
1798 return rte_flow_error_set(error, EINVAL,
1799 RTE_FLOW_ERROR_TYPE_ITEM, item,
1800 "protocol filtering not compatible"
1802 if (!(item_flags & l3m))
1803 return rte_flow_error_set(error, EINVAL,
1804 RTE_FLOW_ERROR_TYPE_ITEM, item,
1805 "L3 is mandatory to filter on L4");
1806 if (item_flags & l4m)
1807 return rte_flow_error_set(error, EINVAL,
1808 RTE_FLOW_ERROR_TYPE_ITEM, item,
1809 "multiple L4 layers not supported");
1811 mask = &rte_flow_item_tcp_mask;
1812 ret = mlx5_flow_item_acceptable
1813 (item, (const uint8_t *)mask,
1814 (const uint8_t *)flow_mask,
1815 sizeof(struct rte_flow_item_tcp), error);
1822 * Validate VXLAN item.
1825 * Item specification.
1826 * @param[in] item_flags
1827 * Bit-fields that holds the items detected until now.
1828 * @param[in] target_protocol
1829 * The next protocol in the previous item.
1831 * Pointer to error structure.
1834 * 0 on success, a negative errno value otherwise and rte_errno is set.
1837 mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
1838 uint64_t item_flags,
1839 struct rte_flow_error *error)
1841 const struct rte_flow_item_vxlan *spec = item->spec;
1842 const struct rte_flow_item_vxlan *mask = item->mask;
1847 } id = { .vlan_id = 0, };
1850 if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
1851 return rte_flow_error_set(error, ENOTSUP,
1852 RTE_FLOW_ERROR_TYPE_ITEM, item,
1853 "multiple tunnel layers not"
1856 * Verify only UDPv4 is present as defined in
1857 * https://tools.ietf.org/html/rfc7348
1859 if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
1860 return rte_flow_error_set(error, EINVAL,
1861 RTE_FLOW_ERROR_TYPE_ITEM, item,
1862 "no outer UDP layer found");
1864 mask = &rte_flow_item_vxlan_mask;
1865 ret = mlx5_flow_item_acceptable
1866 (item, (const uint8_t *)mask,
1867 (const uint8_t *)&rte_flow_item_vxlan_mask,
1868 sizeof(struct rte_flow_item_vxlan),
1873 memcpy(&id.vni[1], spec->vni, 3);
1874 memcpy(&id.vni[1], mask->vni, 3);
1876 if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
1877 return rte_flow_error_set(error, ENOTSUP,
1878 RTE_FLOW_ERROR_TYPE_ITEM, item,
1879 "VXLAN tunnel must be fully defined");
1884 * Validate VXLAN_GPE item.
1887 * Item specification.
1888 * @param[in] item_flags
1889 * Bit-fields that holds the items detected until now.
1891 * Pointer to the private data structure.
1892 * @param[in] target_protocol
1893 * The next protocol in the previous item.
1895 * Pointer to error structure.
1898 * 0 on success, a negative errno value otherwise and rte_errno is set.
1901 mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
1902 uint64_t item_flags,
1903 struct rte_eth_dev *dev,
1904 struct rte_flow_error *error)
1906 struct mlx5_priv *priv = dev->data->dev_private;
1907 const struct rte_flow_item_vxlan_gpe *spec = item->spec;
1908 const struct rte_flow_item_vxlan_gpe *mask = item->mask;
1913 } id = { .vlan_id = 0, };
1915 if (!priv->config.l3_vxlan_en)
1916 return rte_flow_error_set(error, ENOTSUP,
1917 RTE_FLOW_ERROR_TYPE_ITEM, item,
1918 "L3 VXLAN is not enabled by device"
1919 " parameter and/or not configured in"
1921 if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
1922 return rte_flow_error_set(error, ENOTSUP,
1923 RTE_FLOW_ERROR_TYPE_ITEM, item,
1924 "multiple tunnel layers not"
1927 * Verify only UDPv4 is present as defined in
1928 * https://tools.ietf.org/html/rfc7348
1930 if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
1931 return rte_flow_error_set(error, EINVAL,
1932 RTE_FLOW_ERROR_TYPE_ITEM, item,
1933 "no outer UDP layer found");
1935 mask = &rte_flow_item_vxlan_gpe_mask;
1936 ret = mlx5_flow_item_acceptable
1937 (item, (const uint8_t *)mask,
1938 (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
1939 sizeof(struct rte_flow_item_vxlan_gpe),
1945 return rte_flow_error_set(error, ENOTSUP,
1946 RTE_FLOW_ERROR_TYPE_ITEM,
1948 "VxLAN-GPE protocol"
1950 memcpy(&id.vni[1], spec->vni, 3);
1951 memcpy(&id.vni[1], mask->vni, 3);
1953 if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
1954 return rte_flow_error_set(error, ENOTSUP,
1955 RTE_FLOW_ERROR_TYPE_ITEM, item,
1956 "VXLAN-GPE tunnel must be fully"
1961 * Validate GRE Key item.
1964 * Item specification.
1965 * @param[in] item_flags
1966 * Bit flags to mark detected items.
1967 * @param[in] gre_item
1968 * Pointer to gre_item
1970 * Pointer to error structure.
1973 * 0 on success, a negative errno value otherwise and rte_errno is set.
1976 mlx5_flow_validate_item_gre_key(const struct rte_flow_item *item,
1977 uint64_t item_flags,
1978 const struct rte_flow_item *gre_item,
1979 struct rte_flow_error *error)
1981 const rte_be32_t *mask = item->mask;
1983 rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
1984 const struct rte_flow_item_gre *gre_spec;
1985 const struct rte_flow_item_gre *gre_mask;
1987 if (item_flags & MLX5_FLOW_LAYER_GRE_KEY)
1988 return rte_flow_error_set(error, ENOTSUP,
1989 RTE_FLOW_ERROR_TYPE_ITEM, item,
1990 "Multiple GRE key not support");
1991 if (!(item_flags & MLX5_FLOW_LAYER_GRE))
1992 return rte_flow_error_set(error, ENOTSUP,
1993 RTE_FLOW_ERROR_TYPE_ITEM, item,
1994 "No preceding GRE header");
1995 if (item_flags & MLX5_FLOW_LAYER_INNER)
1996 return rte_flow_error_set(error, ENOTSUP,
1997 RTE_FLOW_ERROR_TYPE_ITEM, item,
1998 "GRE key following a wrong item");
1999 gre_mask = gre_item->mask;
2001 gre_mask = &rte_flow_item_gre_mask;
2002 gre_spec = gre_item->spec;
2003 if (gre_spec && (gre_mask->c_rsvd0_ver & RTE_BE16(0x2000)) &&
2004 !(gre_spec->c_rsvd0_ver & RTE_BE16(0x2000)))
2005 return rte_flow_error_set(error, EINVAL,
2006 RTE_FLOW_ERROR_TYPE_ITEM, item,
2007 "Key bit must be on");
2010 mask = &gre_key_default_mask;
2011 ret = mlx5_flow_item_acceptable
2012 (item, (const uint8_t *)mask,
2013 (const uint8_t *)&gre_key_default_mask,
2014 sizeof(rte_be32_t), error);
2019 * Validate GRE item.
2022 * Item specification.
2023 * @param[in] item_flags
2024 * Bit flags to mark detected items.
2025 * @param[in] target_protocol
2026 * The next protocol in the previous item.
2028 * Pointer to error structure.
2031 * 0 on success, a negative errno value otherwise and rte_errno is set.
2034 mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
2035 uint64_t item_flags,
2036 uint8_t target_protocol,
2037 struct rte_flow_error *error)
2039 const struct rte_flow_item_gre *spec __rte_unused = item->spec;
2040 const struct rte_flow_item_gre *mask = item->mask;
2042 const struct rte_flow_item_gre nic_mask = {
2043 .c_rsvd0_ver = RTE_BE16(0xB000),
2044 .protocol = RTE_BE16(UINT16_MAX),
2047 if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2048 return rte_flow_error_set(error, EINVAL,
2049 RTE_FLOW_ERROR_TYPE_ITEM, item,
2050 "protocol filtering not compatible"
2051 " with this GRE layer");
2052 if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2053 return rte_flow_error_set(error, ENOTSUP,
2054 RTE_FLOW_ERROR_TYPE_ITEM, item,
2055 "multiple tunnel layers not"
2057 if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2058 return rte_flow_error_set(error, ENOTSUP,
2059 RTE_FLOW_ERROR_TYPE_ITEM, item,
2060 "L3 Layer is missing");
2062 mask = &rte_flow_item_gre_mask;
2063 ret = mlx5_flow_item_acceptable
2064 (item, (const uint8_t *)mask,
2065 (const uint8_t *)&nic_mask,
2066 sizeof(struct rte_flow_item_gre), error);
2069 #ifndef HAVE_MLX5DV_DR
2070 #ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
2071 if (spec && (spec->protocol & mask->protocol))
2072 return rte_flow_error_set(error, ENOTSUP,
2073 RTE_FLOW_ERROR_TYPE_ITEM, item,
2074 "without MPLS support the"
2075 " specification cannot be used for"
2083 * Validate Geneve item.
2086 * Item specification.
2087 * @param[in] itemFlags
2088 * Bit-fields that holds the items detected until now.
2090 * Pointer to the private data structure.
2092 * Pointer to error structure.
2095 * 0 on success, a negative errno value otherwise and rte_errno is set.
2099 mlx5_flow_validate_item_geneve(const struct rte_flow_item *item,
2100 uint64_t item_flags,
2101 struct rte_eth_dev *dev,
2102 struct rte_flow_error *error)
2104 struct mlx5_priv *priv = dev->data->dev_private;
2105 const struct rte_flow_item_geneve *spec = item->spec;
2106 const struct rte_flow_item_geneve *mask = item->mask;
2109 uint8_t opt_len = priv->config.hca_attr.geneve_max_opt_len ?
2110 MLX5_GENEVE_OPT_LEN_1 : MLX5_GENEVE_OPT_LEN_0;
2111 const struct rte_flow_item_geneve nic_mask = {
2112 .ver_opt_len_o_c_rsvd0 = RTE_BE16(0x3f80),
2113 .vni = "\xff\xff\xff",
2114 .protocol = RTE_BE16(UINT16_MAX),
2117 if (!priv->config.hca_attr.tunnel_stateless_geneve_rx)
2118 return rte_flow_error_set(error, ENOTSUP,
2119 RTE_FLOW_ERROR_TYPE_ITEM, item,
2120 "L3 Geneve is not enabled by device"
2121 " parameter and/or not configured in"
2123 if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2124 return rte_flow_error_set(error, ENOTSUP,
2125 RTE_FLOW_ERROR_TYPE_ITEM, item,
2126 "multiple tunnel layers not"
2129 * Verify only UDPv4 is present as defined in
2130 * https://tools.ietf.org/html/rfc7348
2132 if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2133 return rte_flow_error_set(error, EINVAL,
2134 RTE_FLOW_ERROR_TYPE_ITEM, item,
2135 "no outer UDP layer found");
2137 mask = &rte_flow_item_geneve_mask;
2138 ret = mlx5_flow_item_acceptable
2139 (item, (const uint8_t *)mask,
2140 (const uint8_t *)&nic_mask,
2141 sizeof(struct rte_flow_item_geneve), error);
2145 gbhdr = rte_be_to_cpu_16(spec->ver_opt_len_o_c_rsvd0);
2146 if (MLX5_GENEVE_VER_VAL(gbhdr) ||
2147 MLX5_GENEVE_CRITO_VAL(gbhdr) ||
2148 MLX5_GENEVE_RSVD_VAL(gbhdr) || spec->rsvd1)
2149 return rte_flow_error_set(error, ENOTSUP,
2150 RTE_FLOW_ERROR_TYPE_ITEM,
2152 "Geneve protocol unsupported"
2153 " fields are being used");
2154 if (MLX5_GENEVE_OPTLEN_VAL(gbhdr) > opt_len)
2155 return rte_flow_error_set
2157 RTE_FLOW_ERROR_TYPE_ITEM,
2159 "Unsupported Geneve options length");
2161 if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2162 return rte_flow_error_set
2164 RTE_FLOW_ERROR_TYPE_ITEM, item,
2165 "Geneve tunnel must be fully defined");
2170 * Validate MPLS item.
2173 * Pointer to the rte_eth_dev structure.
2175 * Item specification.
2176 * @param[in] item_flags
2177 * Bit-fields that holds the items detected until now.
2178 * @param[in] prev_layer
2179 * The protocol layer indicated in previous item.
2181 * Pointer to error structure.
2184 * 0 on success, a negative errno value otherwise and rte_errno is set.
2187 mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
2188 const struct rte_flow_item *item __rte_unused,
2189 uint64_t item_flags __rte_unused,
2190 uint64_t prev_layer __rte_unused,
2191 struct rte_flow_error *error)
2193 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
2194 const struct rte_flow_item_mpls *mask = item->mask;
2195 struct mlx5_priv *priv = dev->data->dev_private;
2198 if (!priv->config.mpls_en)
2199 return rte_flow_error_set(error, ENOTSUP,
2200 RTE_FLOW_ERROR_TYPE_ITEM, item,
2201 "MPLS not supported or"
2202 " disabled in firmware"
2204 /* MPLS over IP, UDP, GRE is allowed */
2205 if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
2206 MLX5_FLOW_LAYER_OUTER_L4_UDP |
2207 MLX5_FLOW_LAYER_GRE)))
2208 return rte_flow_error_set(error, EINVAL,
2209 RTE_FLOW_ERROR_TYPE_ITEM, item,
2210 "protocol filtering not compatible"
2211 " with MPLS layer");
2212 /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
2213 if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
2214 !(item_flags & MLX5_FLOW_LAYER_GRE))
2215 return rte_flow_error_set(error, ENOTSUP,
2216 RTE_FLOW_ERROR_TYPE_ITEM, item,
2217 "multiple tunnel layers not"
2220 mask = &rte_flow_item_mpls_mask;
2221 ret = mlx5_flow_item_acceptable
2222 (item, (const uint8_t *)mask,
2223 (const uint8_t *)&rte_flow_item_mpls_mask,
2224 sizeof(struct rte_flow_item_mpls), error);
2229 return rte_flow_error_set(error, ENOTSUP,
2230 RTE_FLOW_ERROR_TYPE_ITEM, item,
2231 "MPLS is not supported by Verbs, please"
2236 * Validate NVGRE item.
2239 * Item specification.
2240 * @param[in] item_flags
2241 * Bit flags to mark detected items.
2242 * @param[in] target_protocol
2243 * The next protocol in the previous item.
2245 * Pointer to error structure.
2248 * 0 on success, a negative errno value otherwise and rte_errno is set.
2251 mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
2252 uint64_t item_flags,
2253 uint8_t target_protocol,
2254 struct rte_flow_error *error)
2256 const struct rte_flow_item_nvgre *mask = item->mask;
2259 if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2260 return rte_flow_error_set(error, EINVAL,
2261 RTE_FLOW_ERROR_TYPE_ITEM, item,
2262 "protocol filtering not compatible"
2263 " with this GRE layer");
2264 if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2265 return rte_flow_error_set(error, ENOTSUP,
2266 RTE_FLOW_ERROR_TYPE_ITEM, item,
2267 "multiple tunnel layers not"
2269 if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2270 return rte_flow_error_set(error, ENOTSUP,
2271 RTE_FLOW_ERROR_TYPE_ITEM, item,
2272 "L3 Layer is missing");
2274 mask = &rte_flow_item_nvgre_mask;
2275 ret = mlx5_flow_item_acceptable
2276 (item, (const uint8_t *)mask,
2277 (const uint8_t *)&rte_flow_item_nvgre_mask,
2278 sizeof(struct rte_flow_item_nvgre), error);
2284 /* Allocate unique ID for the split Q/RSS subflows. */
2286 flow_qrss_get_id(struct rte_eth_dev *dev)
2288 struct mlx5_priv *priv = dev->data->dev_private;
2289 uint32_t qrss_id, ret;
2291 ret = mlx5_flow_id_get(priv->qrss_id_pool, &qrss_id);
2294 MLX5_ASSERT(qrss_id);
2298 /* Free unique ID for the split Q/RSS subflows. */
2300 flow_qrss_free_id(struct rte_eth_dev *dev, uint32_t qrss_id)
2302 struct mlx5_priv *priv = dev->data->dev_private;
2305 mlx5_flow_id_release(priv->qrss_id_pool, qrss_id);
2309 * Release resource related QUEUE/RSS action split.
2312 * Pointer to Ethernet device.
2314 * Flow to release id's from.
2317 flow_mreg_split_qrss_release(struct rte_eth_dev *dev,
2318 struct rte_flow *flow)
2320 struct mlx5_priv *priv = dev->data->dev_private;
2321 uint32_t handle_idx;
2322 struct mlx5_flow_handle *dev_handle;
2324 SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
2325 handle_idx, dev_handle, next)
2326 if (dev_handle->split_flow_id)
2327 flow_qrss_free_id(dev, dev_handle->split_flow_id);
2331 flow_null_validate(struct rte_eth_dev *dev __rte_unused,
2332 const struct rte_flow_attr *attr __rte_unused,
2333 const struct rte_flow_item items[] __rte_unused,
2334 const struct rte_flow_action actions[] __rte_unused,
2335 bool external __rte_unused,
2336 struct rte_flow_error *error)
2338 return rte_flow_error_set(error, ENOTSUP,
2339 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
2342 static struct mlx5_flow *
2343 flow_null_prepare(struct rte_eth_dev *dev __rte_unused,
2344 const struct rte_flow_attr *attr __rte_unused,
2345 const struct rte_flow_item items[] __rte_unused,
2346 const struct rte_flow_action actions[] __rte_unused,
2347 struct rte_flow_error *error)
2349 rte_flow_error_set(error, ENOTSUP,
2350 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
2355 flow_null_translate(struct rte_eth_dev *dev __rte_unused,
2356 struct mlx5_flow *dev_flow __rte_unused,
2357 const struct rte_flow_attr *attr __rte_unused,
2358 const struct rte_flow_item items[] __rte_unused,
2359 const struct rte_flow_action actions[] __rte_unused,
2360 struct rte_flow_error *error)
2362 return rte_flow_error_set(error, ENOTSUP,
2363 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
2367 flow_null_apply(struct rte_eth_dev *dev __rte_unused,
2368 struct rte_flow *flow __rte_unused,
2369 struct rte_flow_error *error)
2371 return rte_flow_error_set(error, ENOTSUP,
2372 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
2376 flow_null_remove(struct rte_eth_dev *dev __rte_unused,
2377 struct rte_flow *flow __rte_unused)
2382 flow_null_destroy(struct rte_eth_dev *dev __rte_unused,
2383 struct rte_flow *flow __rte_unused)
2388 flow_null_query(struct rte_eth_dev *dev __rte_unused,
2389 struct rte_flow *flow __rte_unused,
2390 const struct rte_flow_action *actions __rte_unused,
2391 void *data __rte_unused,
2392 struct rte_flow_error *error)
2394 return rte_flow_error_set(error, ENOTSUP,
2395 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
2398 /* Void driver to protect from null pointer reference. */
2399 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
2400 .validate = flow_null_validate,
2401 .prepare = flow_null_prepare,
2402 .translate = flow_null_translate,
2403 .apply = flow_null_apply,
2404 .remove = flow_null_remove,
2405 .destroy = flow_null_destroy,
2406 .query = flow_null_query,
2410 * Select flow driver type according to flow attributes and device
2414 * Pointer to the dev structure.
2416 * Pointer to the flow attributes.
2419 * flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
2421 static enum mlx5_flow_drv_type
2422 flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
2424 struct mlx5_priv *priv = dev->data->dev_private;
2425 enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
2427 if (attr->transfer && priv->config.dv_esw_en)
2428 type = MLX5_FLOW_TYPE_DV;
2429 if (!attr->transfer)
2430 type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
2431 MLX5_FLOW_TYPE_VERBS;
2435 #define flow_get_drv_ops(type) flow_drv_ops[type]
2438 * Flow driver validation API. This abstracts calling driver specific functions.
2439 * The type of flow driver is determined according to flow attributes.
2442 * Pointer to the dev structure.
2444 * Pointer to the flow attributes.
2446 * Pointer to the list of items.
2447 * @param[in] actions
2448 * Pointer to the list of actions.
2449 * @param[in] external
2450 * This flow rule is created by request external to PMD.
2452 * Pointer to the error structure.
2455 * 0 on success, a negative errno value otherwise and rte_errno is set.
2458 flow_drv_validate(struct rte_eth_dev *dev,
2459 const struct rte_flow_attr *attr,
2460 const struct rte_flow_item items[],
2461 const struct rte_flow_action actions[],
2462 bool external, struct rte_flow_error *error)
2464 const struct mlx5_flow_driver_ops *fops;
2465 enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
2467 fops = flow_get_drv_ops(type);
2468 return fops->validate(dev, attr, items, actions, external, error);
2472 * Flow driver preparation API. This abstracts calling driver specific
2473 * functions. Parent flow (rte_flow) should have driver type (drv_type). It
2474 * calculates the size of memory required for device flow, allocates the memory,
2475 * initializes the device flow and returns the pointer.
2478 * This function initializes device flow structure such as dv or verbs in
2479 * struct mlx5_flow. However, it is caller's responsibility to initialize the
2480 * rest. For example, adding returning device flow to flow->dev_flow list and
2481 * setting backward reference to the flow should be done out of this function.
2482 * layers field is not filled either.
2485 * Pointer to the dev structure.
2487 * Pointer to the flow attributes.
2489 * Pointer to the list of items.
2490 * @param[in] actions
2491 * Pointer to the list of actions.
2493 * Pointer to the error structure.
2496 * Pointer to device flow on success, otherwise NULL and rte_errno is set.
2498 static inline struct mlx5_flow *
2499 flow_drv_prepare(struct rte_eth_dev *dev,
2500 const struct rte_flow *flow,
2501 const struct rte_flow_attr *attr,
2502 const struct rte_flow_item items[],
2503 const struct rte_flow_action actions[],
2504 struct rte_flow_error *error)
2506 const struct mlx5_flow_driver_ops *fops;
2507 enum mlx5_flow_drv_type type = flow->drv_type;
2509 MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
2510 fops = flow_get_drv_ops(type);
2511 return fops->prepare(dev, attr, items, actions, error);
2515 * Flow driver translation API. This abstracts calling driver specific
2516 * functions. Parent flow (rte_flow) should have driver type (drv_type). It
2517 * translates a generic flow into a driver flow. flow_drv_prepare() must
2521 * dev_flow->layers could be filled as a result of parsing during translation
2522 * if needed by flow_drv_apply(). dev_flow->flow->actions can also be filled
2523 * if necessary. As a flow can have multiple dev_flows by RSS flow expansion,
2524 * flow->actions could be overwritten even though all the expanded dev_flows
2525 * have the same actions.
2528 * Pointer to the rte dev structure.
2529 * @param[in, out] dev_flow
2530 * Pointer to the mlx5 flow.
2532 * Pointer to the flow attributes.
2534 * Pointer to the list of items.
2535 * @param[in] actions
2536 * Pointer to the list of actions.
2538 * Pointer to the error structure.
2541 * 0 on success, a negative errno value otherwise and rte_errno is set.
2544 flow_drv_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
2545 const struct rte_flow_attr *attr,
2546 const struct rte_flow_item items[],
2547 const struct rte_flow_action actions[],
2548 struct rte_flow_error *error)
2550 const struct mlx5_flow_driver_ops *fops;
2551 enum mlx5_flow_drv_type type = dev_flow->flow->drv_type;
2553 MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
2554 fops = flow_get_drv_ops(type);
2555 return fops->translate(dev, dev_flow, attr, items, actions, error);
2559 * Flow driver apply API. This abstracts calling driver specific functions.
2560 * Parent flow (rte_flow) should have driver type (drv_type). It applies
2561 * translated driver flows on to device. flow_drv_translate() must precede.
2564 * Pointer to Ethernet device structure.
2565 * @param[in, out] flow
2566 * Pointer to flow structure.
2568 * Pointer to error structure.
2571 * 0 on success, a negative errno value otherwise and rte_errno is set.
2574 flow_drv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
2575 struct rte_flow_error *error)
2577 const struct mlx5_flow_driver_ops *fops;
2578 enum mlx5_flow_drv_type type = flow->drv_type;
2580 MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
2581 fops = flow_get_drv_ops(type);
2582 return fops->apply(dev, flow, error);
2586 * Flow driver remove API. This abstracts calling driver specific functions.
2587 * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
2588 * on device. All the resources of the flow should be freed by calling
2589 * flow_drv_destroy().
2592 * Pointer to Ethernet device.
2593 * @param[in, out] flow
2594 * Pointer to flow structure.
2597 flow_drv_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
2599 const struct mlx5_flow_driver_ops *fops;
2600 enum mlx5_flow_drv_type type = flow->drv_type;
2602 MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
2603 fops = flow_get_drv_ops(type);
2604 fops->remove(dev, flow);
2608 * Flow driver destroy API. This abstracts calling driver specific functions.
2609 * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
2610 * on device and releases resources of the flow.
2613 * Pointer to Ethernet device.
2614 * @param[in, out] flow
2615 * Pointer to flow structure.
2618 flow_drv_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
2620 const struct mlx5_flow_driver_ops *fops;
2621 enum mlx5_flow_drv_type type = flow->drv_type;
2623 flow_mreg_split_qrss_release(dev, flow);
2624 MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
2625 fops = flow_get_drv_ops(type);
2626 fops->destroy(dev, flow);
2630 * Validate a flow supported by the NIC.
2632 * @see rte_flow_validate()
2636 mlx5_flow_validate(struct rte_eth_dev *dev,
2637 const struct rte_flow_attr *attr,
2638 const struct rte_flow_item items[],
2639 const struct rte_flow_action actions[],
2640 struct rte_flow_error *error)
2644 ret = flow_drv_validate(dev, attr, items, actions, true, error);
2651 * Get RSS action from the action list.
2653 * @param[in] actions
2654 * Pointer to the list of actions.
2657 * Pointer to the RSS action if exist, else return NULL.
2659 static const struct rte_flow_action_rss*
2660 flow_get_rss_action(const struct rte_flow_action actions[])
2662 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
2663 switch (actions->type) {
2664 case RTE_FLOW_ACTION_TYPE_RSS:
2665 return (const struct rte_flow_action_rss *)
2675 find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
2677 const struct rte_flow_item *item;
2678 unsigned int has_vlan = 0;
2680 for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
2681 if (item->type == RTE_FLOW_ITEM_TYPE_VLAN) {
2687 return rss_level < 2 ? MLX5_EXPANSION_ROOT_ETH_VLAN :
2688 MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN;
2689 return rss_level < 2 ? MLX5_EXPANSION_ROOT :
2690 MLX5_EXPANSION_ROOT_OUTER;
2694 * Get layer flags from the prefix flow.
2696 * Some flows may be split to several subflows, the prefix subflow gets the
2697 * match items and the suffix sub flow gets the actions.
2698 * Some actions need the user defined match item flags to get the detail for
2700 * This function helps the suffix flow to get the item layer flags from prefix
2703 * @param[in] dev_flow
2704 * Pointer the created preifx subflow.
2707 * The layers get from prefix subflow.
2709 static inline uint64_t
2710 flow_get_prefix_layer_flags(struct mlx5_flow *dev_flow)
2712 uint64_t layers = 0;
2715 * Layers bits could be localization, but usually the compiler will
2716 * help to do the optimization work for source code.
2717 * If no decap actions, use the layers directly.
2719 if (!(dev_flow->act_flags & MLX5_FLOW_ACTION_DECAP))
2720 return dev_flow->handle->layers;
2721 /* Convert L3 layers with decap action. */
2722 if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV4)
2723 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
2724 else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV6)
2725 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
2726 /* Convert L4 layers with decap action. */
2727 if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_TCP)
2728 layers |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
2729 else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_UDP)
2730 layers |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
2735 * Get metadata split action information.
2737 * @param[in] actions
2738 * Pointer to the list of actions.
2740 * Pointer to the return pointer.
2741 * @param[out] qrss_type
2742 * Pointer to the action type to return. RTE_FLOW_ACTION_TYPE_END is returned
2743 * if no QUEUE/RSS is found.
2744 * @param[out] encap_idx
2745 * Pointer to the index of the encap action if exists, otherwise the last
2749 * Total number of actions.
2752 flow_parse_metadata_split_actions_info(const struct rte_flow_action actions[],
2753 const struct rte_flow_action **qrss,
2756 const struct rte_flow_action_raw_encap *raw_encap;
2758 int raw_decap_idx = -1;
2761 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
2762 switch (actions->type) {
2763 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
2764 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
2765 *encap_idx = actions_n;
2767 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
2768 raw_decap_idx = actions_n;
2770 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
2771 raw_encap = actions->conf;
2772 if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
2773 *encap_idx = raw_decap_idx != -1 ?
2774 raw_decap_idx : actions_n;
2776 case RTE_FLOW_ACTION_TYPE_QUEUE:
2777 case RTE_FLOW_ACTION_TYPE_RSS:
2785 if (*encap_idx == -1)
2786 *encap_idx = actions_n;
2787 /* Count RTE_FLOW_ACTION_TYPE_END. */
2788 return actions_n + 1;
2792 * Check meter action from the action list.
2794 * @param[in] actions
2795 * Pointer to the list of actions.
2797 * Pointer to the meter exist flag.
2800 * Total number of actions.
2803 flow_check_meter_action(const struct rte_flow_action actions[], uint32_t *mtr)
2809 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
2810 switch (actions->type) {
2811 case RTE_FLOW_ACTION_TYPE_METER:
2819 /* Count RTE_FLOW_ACTION_TYPE_END. */
2820 return actions_n + 1;
2824 * Check if the flow should be splited due to hairpin.
2825 * The reason for the split is that in current HW we can't
2826 * support encap on Rx, so if a flow have encap we move it
2830 * Pointer to Ethernet device.
2832 * Flow rule attributes.
2833 * @param[in] actions
2834 * Associated actions (list terminated by the END action).
2837 * > 0 the number of actions and the flow should be split,
2838 * 0 when no split required.
2841 flow_check_hairpin_split(struct rte_eth_dev *dev,
2842 const struct rte_flow_attr *attr,
2843 const struct rte_flow_action actions[])
2845 int queue_action = 0;
2848 const struct rte_flow_action_queue *queue;
2849 const struct rte_flow_action_rss *rss;
2850 const struct rte_flow_action_raw_encap *raw_encap;
2854 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
2855 switch (actions->type) {
2856 case RTE_FLOW_ACTION_TYPE_QUEUE:
2857 queue = actions->conf;
2860 if (mlx5_rxq_get_type(dev, queue->index) !=
2861 MLX5_RXQ_TYPE_HAIRPIN)
2866 case RTE_FLOW_ACTION_TYPE_RSS:
2867 rss = actions->conf;
2868 if (rss == NULL || rss->queue_num == 0)
2870 if (mlx5_rxq_get_type(dev, rss->queue[0]) !=
2871 MLX5_RXQ_TYPE_HAIRPIN)
2876 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
2877 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
2881 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
2882 raw_encap = actions->conf;
2883 if (raw_encap->size >
2884 (sizeof(struct rte_flow_item_eth) +
2885 sizeof(struct rte_flow_item_ipv4)))
2894 if (encap == 1 && queue_action)
2899 /* Declare flow create/destroy prototype in advance. */
2900 static struct rte_flow *
2901 flow_list_create(struct rte_eth_dev *dev, struct mlx5_flows *list,
2902 const struct rte_flow_attr *attr,
2903 const struct rte_flow_item items[],
2904 const struct rte_flow_action actions[],
2905 bool external, struct rte_flow_error *error);
2908 flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
2909 struct rte_flow *flow);
2912 * Add a flow of copying flow metadata registers in RX_CP_TBL.
2914 * As mark_id is unique, if there's already a registered flow for the mark_id,
2915 * return by increasing the reference counter of the resource. Otherwise, create
2916 * the resource (mcp_res) and flow.
2919 * - If ingress port is ANY and reg_c[1] is mark_id,
2920 * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
2922 * For default flow (zero mark_id), flow is like,
2923 * - If ingress port is ANY,
2924 * reg_b := reg_c[0] and jump to RX_ACT_TBL.
2927 * Pointer to Ethernet device.
2929 * ID of MARK action, zero means default flow for META.
2931 * Perform verbose error reporting if not NULL.
2934 * Associated resource on success, NULL otherwise and rte_errno is set.
2936 static struct mlx5_flow_mreg_copy_resource *
2937 flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
2938 struct rte_flow_error *error)
2940 struct mlx5_priv *priv = dev->data->dev_private;
2941 struct rte_flow_attr attr = {
2942 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
2945 struct mlx5_rte_flow_item_tag tag_spec = {
2948 struct rte_flow_item items[] = {
2949 [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
2951 struct rte_flow_action_mark ftag = {
2954 struct mlx5_flow_action_copy_mreg cp_mreg = {
2958 struct rte_flow_action_jump jump = {
2959 .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
2961 struct rte_flow_action actions[] = {
2962 [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
2964 struct mlx5_flow_mreg_copy_resource *mcp_res;
2967 /* Fill the register fileds in the flow. */
2968 ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
2972 ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
2976 /* Check if already registered. */
2977 MLX5_ASSERT(priv->mreg_cp_tbl);
2978 mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, mark_id);
2980 /* For non-default rule. */
2981 if (mark_id != MLX5_DEFAULT_COPY_ID)
2983 MLX5_ASSERT(mark_id != MLX5_DEFAULT_COPY_ID ||
2984 mcp_res->refcnt == 1);
2987 /* Provide the full width of FLAG specific value. */
2988 if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
2989 tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
2990 /* Build a new flow. */
2991 if (mark_id != MLX5_DEFAULT_COPY_ID) {
2992 items[0] = (struct rte_flow_item){
2993 .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
2996 items[1] = (struct rte_flow_item){
2997 .type = RTE_FLOW_ITEM_TYPE_END,
2999 actions[0] = (struct rte_flow_action){
3000 .type = MLX5_RTE_FLOW_ACTION_TYPE_MARK,
3003 actions[1] = (struct rte_flow_action){
3004 .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3007 actions[2] = (struct rte_flow_action){
3008 .type = RTE_FLOW_ACTION_TYPE_JUMP,
3011 actions[3] = (struct rte_flow_action){
3012 .type = RTE_FLOW_ACTION_TYPE_END,
3015 /* Default rule, wildcard match. */
3016 attr.priority = MLX5_FLOW_PRIO_RSVD;
3017 items[0] = (struct rte_flow_item){
3018 .type = RTE_FLOW_ITEM_TYPE_END,
3020 actions[0] = (struct rte_flow_action){
3021 .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3024 actions[1] = (struct rte_flow_action){
3025 .type = RTE_FLOW_ACTION_TYPE_JUMP,
3028 actions[2] = (struct rte_flow_action){
3029 .type = RTE_FLOW_ACTION_TYPE_END,
3032 /* Build a new entry. */
3033 mcp_res = rte_zmalloc(__func__, sizeof(*mcp_res), 0);
3039 * The copy Flows are not included in any list. There
3040 * ones are referenced from other Flows and can not
3041 * be applied, removed, deleted in ardbitrary order
3042 * by list traversing.
3044 mcp_res->flow = flow_list_create(dev, NULL, &attr, items,
3045 actions, false, error);
3049 mcp_res->hlist_ent.key = mark_id;
3050 ret = mlx5_hlist_insert(priv->mreg_cp_tbl,
3051 &mcp_res->hlist_ent);
3058 flow_list_destroy(dev, NULL, mcp_res->flow);
3064 * Release flow in RX_CP_TBL.
3067 * Pointer to Ethernet device.
3069 * Parent flow for wich copying is provided.
3072 flow_mreg_del_copy_action(struct rte_eth_dev *dev,
3073 struct rte_flow *flow)
3075 struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
3076 struct mlx5_priv *priv = dev->data->dev_private;
3078 if (!mcp_res || !priv->mreg_cp_tbl)
3080 if (flow->copy_applied) {
3081 MLX5_ASSERT(mcp_res->appcnt);
3082 flow->copy_applied = 0;
3084 if (!mcp_res->appcnt)
3085 flow_drv_remove(dev, mcp_res->flow);
3088 * We do not check availability of metadata registers here,
3089 * because copy resources are not allocated in this case.
3091 if (--mcp_res->refcnt)
3093 MLX5_ASSERT(mcp_res->flow);
3094 flow_list_destroy(dev, NULL, mcp_res->flow);
3095 mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
3097 flow->mreg_copy = NULL;
3101 * Start flow in RX_CP_TBL.
3104 * Pointer to Ethernet device.
3106 * Parent flow for wich copying is provided.
3109 * 0 on success, a negative errno value otherwise and rte_errno is set.
3112 flow_mreg_start_copy_action(struct rte_eth_dev *dev,
3113 struct rte_flow *flow)
3115 struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
3118 if (!mcp_res || flow->copy_applied)
3120 if (!mcp_res->appcnt) {
3121 ret = flow_drv_apply(dev, mcp_res->flow, NULL);
3126 flow->copy_applied = 1;
3131 * Stop flow in RX_CP_TBL.
3134 * Pointer to Ethernet device.
3136 * Parent flow for wich copying is provided.
3139 flow_mreg_stop_copy_action(struct rte_eth_dev *dev,
3140 struct rte_flow *flow)
3142 struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
3144 if (!mcp_res || !flow->copy_applied)
3146 MLX5_ASSERT(mcp_res->appcnt);
3148 flow->copy_applied = 0;
3149 if (!mcp_res->appcnt)
3150 flow_drv_remove(dev, mcp_res->flow);
3154 * Remove the default copy action from RX_CP_TBL.
3157 * Pointer to Ethernet device.
3160 flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
3162 struct mlx5_flow_mreg_copy_resource *mcp_res;
3163 struct mlx5_priv *priv = dev->data->dev_private;
3165 /* Check if default flow is registered. */
3166 if (!priv->mreg_cp_tbl)
3168 mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl,
3169 MLX5_DEFAULT_COPY_ID);
3172 MLX5_ASSERT(mcp_res->flow);
3173 flow_list_destroy(dev, NULL, mcp_res->flow);
3174 mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
3179 * Add the default copy action in in RX_CP_TBL.
3182 * Pointer to Ethernet device.
3184 * Perform verbose error reporting if not NULL.
3187 * 0 for success, negative value otherwise and rte_errno is set.
3190 flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
3191 struct rte_flow_error *error)
3193 struct mlx5_priv *priv = dev->data->dev_private;
3194 struct mlx5_flow_mreg_copy_resource *mcp_res;
3196 /* Check whether extensive metadata feature is engaged. */
3197 if (!priv->config.dv_flow_en ||
3198 priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
3199 !mlx5_flow_ext_mreg_supported(dev) ||
3200 !priv->sh->dv_regc0_mask)
3202 mcp_res = flow_mreg_add_copy_action(dev, MLX5_DEFAULT_COPY_ID, error);
3209 * Add a flow of copying flow metadata registers in RX_CP_TBL.
3211 * All the flow having Q/RSS action should be split by
3212 * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
3213 * performs the following,
3214 * - CQE->flow_tag := reg_c[1] (MARK)
3215 * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
3216 * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
3217 * but there should be a flow per each MARK ID set by MARK action.
3219 * For the aforementioned reason, if there's a MARK action in flow's action
3220 * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
3221 * the MARK ID to CQE's flow_tag like,
3222 * - If reg_c[1] is mark_id,
3223 * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
3225 * For SET_META action which stores value in reg_c[0], as the destination is
3226 * also a flow metadata register (reg_b), adding a default flow is enough. Zero
3227 * MARK ID means the default flow. The default flow looks like,
3228 * - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
3231 * Pointer to Ethernet device.
3233 * Pointer to flow structure.
3234 * @param[in] actions
3235 * Pointer to the list of actions.
3237 * Perform verbose error reporting if not NULL.
3240 * 0 on success, negative value otherwise and rte_errno is set.
3243 flow_mreg_update_copy_table(struct rte_eth_dev *dev,
3244 struct rte_flow *flow,
3245 const struct rte_flow_action *actions,
3246 struct rte_flow_error *error)
3248 struct mlx5_priv *priv = dev->data->dev_private;
3249 struct mlx5_dev_config *config = &priv->config;
3250 struct mlx5_flow_mreg_copy_resource *mcp_res;
3251 const struct rte_flow_action_mark *mark;
3253 /* Check whether extensive metadata feature is engaged. */
3254 if (!config->dv_flow_en ||
3255 config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
3256 !mlx5_flow_ext_mreg_supported(dev) ||
3257 !priv->sh->dv_regc0_mask)
3259 /* Find MARK action. */
3260 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3261 switch (actions->type) {
3262 case RTE_FLOW_ACTION_TYPE_FLAG:
3263 mcp_res = flow_mreg_add_copy_action
3264 (dev, MLX5_FLOW_MARK_DEFAULT, error);
3267 flow->mreg_copy = mcp_res;
3268 if (dev->data->dev_started) {
3270 flow->copy_applied = 1;
3273 case RTE_FLOW_ACTION_TYPE_MARK:
3274 mark = (const struct rte_flow_action_mark *)
3277 flow_mreg_add_copy_action(dev, mark->id, error);
3280 flow->mreg_copy = mcp_res;
3281 if (dev->data->dev_started) {
3283 flow->copy_applied = 1;
3293 #define MLX5_MAX_SPLIT_ACTIONS 24
3294 #define MLX5_MAX_SPLIT_ITEMS 24
3297 * Split the hairpin flow.
3298 * Since HW can't support encap on Rx we move the encap to Tx.
3299 * If the count action is after the encap then we also
3300 * move the count action. in this case the count will also measure
3304 * Pointer to Ethernet device.
3305 * @param[in] actions
3306 * Associated actions (list terminated by the END action).
3307 * @param[out] actions_rx
3309 * @param[out] actions_tx
3311 * @param[out] pattern_tx
3312 * The pattern items for the Tx flow.
3313 * @param[out] flow_id
3314 * The flow ID connected to this flow.
3320 flow_hairpin_split(struct rte_eth_dev *dev,
3321 const struct rte_flow_action actions[],
3322 struct rte_flow_action actions_rx[],
3323 struct rte_flow_action actions_tx[],
3324 struct rte_flow_item pattern_tx[],
3327 struct mlx5_priv *priv = dev->data->dev_private;
3328 const struct rte_flow_action_raw_encap *raw_encap;
3329 const struct rte_flow_action_raw_decap *raw_decap;
3330 struct mlx5_rte_flow_action_set_tag *set_tag;
3331 struct rte_flow_action *tag_action;
3332 struct mlx5_rte_flow_item_tag *tag_item;
3333 struct rte_flow_item *item;
3337 mlx5_flow_id_get(priv->sh->flow_id_pool, flow_id);
3338 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3339 switch (actions->type) {
3340 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
3341 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
3342 rte_memcpy(actions_tx, actions,
3343 sizeof(struct rte_flow_action));
3346 case RTE_FLOW_ACTION_TYPE_COUNT:
3348 rte_memcpy(actions_tx, actions,
3349 sizeof(struct rte_flow_action));
3352 rte_memcpy(actions_rx, actions,
3353 sizeof(struct rte_flow_action));
3357 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3358 raw_encap = actions->conf;
3359 if (raw_encap->size >
3360 (sizeof(struct rte_flow_item_eth) +
3361 sizeof(struct rte_flow_item_ipv4))) {
3362 memcpy(actions_tx, actions,
3363 sizeof(struct rte_flow_action));
3367 rte_memcpy(actions_rx, actions,
3368 sizeof(struct rte_flow_action));
3372 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
3373 raw_decap = actions->conf;
3374 if (raw_decap->size <
3375 (sizeof(struct rte_flow_item_eth) +
3376 sizeof(struct rte_flow_item_ipv4))) {
3377 memcpy(actions_tx, actions,
3378 sizeof(struct rte_flow_action));
3381 rte_memcpy(actions_rx, actions,
3382 sizeof(struct rte_flow_action));
3387 rte_memcpy(actions_rx, actions,
3388 sizeof(struct rte_flow_action));
3393 /* Add set meta action and end action for the Rx flow. */
3394 tag_action = actions_rx;
3395 tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
3397 rte_memcpy(actions_rx, actions, sizeof(struct rte_flow_action));
3399 set_tag = (void *)actions_rx;
3400 set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_RX, 0, NULL);
3401 MLX5_ASSERT(set_tag->id > REG_NONE);
3402 set_tag->data = *flow_id;
3403 tag_action->conf = set_tag;
3404 /* Create Tx item list. */
3405 rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action));
3406 addr = (void *)&pattern_tx[2];
3408 item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
3409 tag_item = (void *)addr;
3410 tag_item->data = *flow_id;
3411 tag_item->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_TX, 0, NULL);
3412 MLX5_ASSERT(set_tag->id > REG_NONE);
3413 item->spec = tag_item;
3414 addr += sizeof(struct mlx5_rte_flow_item_tag);
3415 tag_item = (void *)addr;
3416 tag_item->data = UINT32_MAX;
3417 tag_item->id = UINT16_MAX;
3418 item->mask = tag_item;
3419 addr += sizeof(struct mlx5_rte_flow_item_tag);
3422 item->type = RTE_FLOW_ITEM_TYPE_END;
3427 * The last stage of splitting chain, just creates the subflow
3428 * without any modification.
3431 * Pointer to Ethernet device.
3433 * Parent flow structure pointer.
3434 * @param[in, out] sub_flow
3435 * Pointer to return the created subflow, may be NULL.
3436 * @param[in] prefix_layers
3437 * Prefix subflow layers, may be 0.
3439 * Flow rule attributes.
3441 * Pattern specification (list terminated by the END pattern item).
3442 * @param[in] actions
3443 * Associated actions (list terminated by the END action).
3444 * @param[in] external
3445 * This flow rule is created by request external to PMD.
3447 * Perform verbose error reporting if not NULL.
3449 * 0 on success, negative value otherwise
3452 flow_create_split_inner(struct rte_eth_dev *dev,
3453 struct rte_flow *flow,
3454 struct mlx5_flow **sub_flow,
3455 uint64_t prefix_layers,
3456 const struct rte_flow_attr *attr,
3457 const struct rte_flow_item items[],
3458 const struct rte_flow_action actions[],
3459 bool external, struct rte_flow_error *error)
3461 struct mlx5_flow *dev_flow;
3463 dev_flow = flow_drv_prepare(dev, flow, attr, items, actions, error);
3466 dev_flow->flow = flow;
3467 dev_flow->external = external;
3468 /* Subflow object was created, we must include one in the list. */
3469 SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
3470 dev_flow->handle, next);
3472 * If dev_flow is as one of the suffix flow, some actions in suffix
3473 * flow may need some user defined item layer flags.
3476 dev_flow->handle->layers = prefix_layers;
3478 *sub_flow = dev_flow;
3479 return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
3483 * Split the meter flow.
3485 * As meter flow will split to three sub flow, other than meter
3486 * action, the other actions make sense to only meter accepts
3487 * the packet. If it need to be dropped, no other additional
3488 * actions should be take.
3490 * One kind of special action which decapsulates the L3 tunnel
3491 * header will be in the prefix sub flow, as not to take the
3492 * L3 tunnel header into account.
3495 * Pointer to Ethernet device.
3497 * Pattern specification (list terminated by the END pattern item).
3498 * @param[out] sfx_items
3499 * Suffix flow match items (list terminated by the END pattern item).
3500 * @param[in] actions
3501 * Associated actions (list terminated by the END action).
3502 * @param[out] actions_sfx
3503 * Suffix flow actions.
3504 * @param[out] actions_pre
3505 * Prefix flow actions.
3506 * @param[out] pattern_sfx
3507 * The pattern items for the suffix flow.
3508 * @param[out] tag_sfx
3509 * Pointer to suffix flow tag.
3515 flow_meter_split_prep(struct rte_eth_dev *dev,
3516 const struct rte_flow_item items[],
3517 struct rte_flow_item sfx_items[],
3518 const struct rte_flow_action actions[],
3519 struct rte_flow_action actions_sfx[],
3520 struct rte_flow_action actions_pre[])
3522 struct rte_flow_action *tag_action = NULL;
3523 struct rte_flow_item *tag_item;
3524 struct mlx5_rte_flow_action_set_tag *set_tag;
3525 struct rte_flow_error error;
3526 const struct rte_flow_action_raw_encap *raw_encap;
3527 const struct rte_flow_action_raw_decap *raw_decap;
3528 struct mlx5_rte_flow_item_tag *tag_spec;
3529 struct mlx5_rte_flow_item_tag *tag_mask;
3531 bool copy_vlan = false;
3533 /* Prepare the actions for prefix and suffix flow. */
3534 for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3535 struct rte_flow_action **action_cur = NULL;
3537 switch (actions->type) {
3538 case RTE_FLOW_ACTION_TYPE_METER:
3539 /* Add the extra tag action first. */
3540 tag_action = actions_pre;
3541 tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
3543 action_cur = &actions_pre;
3545 case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
3546 case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
3547 action_cur = &actions_pre;
3549 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3550 raw_encap = actions->conf;
3551 if (raw_encap->size < MLX5_ENCAPSULATION_DECISION_SIZE)
3552 action_cur = &actions_pre;
3554 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
3555 raw_decap = actions->conf;
3556 if (raw_decap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
3557 action_cur = &actions_pre;
3559 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
3560 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
3567 action_cur = &actions_sfx;
3568 memcpy(*action_cur, actions, sizeof(struct rte_flow_action));
3571 /* Add end action to the actions. */
3572 actions_sfx->type = RTE_FLOW_ACTION_TYPE_END;
3573 actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
3576 set_tag = (void *)actions_pre;
3577 set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
3579 * Get the id from the qrss_pool to make qrss share the id with meter.
3581 tag_id = flow_qrss_get_id(dev);
3582 set_tag->data = tag_id << MLX5_MTR_COLOR_BITS;
3584 tag_action->conf = set_tag;
3585 /* Prepare the suffix subflow items. */
3586 tag_item = sfx_items++;
3587 for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
3588 int item_type = items->type;
3590 switch (item_type) {
3591 case RTE_FLOW_ITEM_TYPE_PORT_ID:
3592 memcpy(sfx_items, items, sizeof(*sfx_items));
3595 case RTE_FLOW_ITEM_TYPE_VLAN:
3597 memcpy(sfx_items, items, sizeof(*sfx_items));
3599 * Convert to internal match item, it is used
3600 * for vlan push and set vid.
3602 sfx_items->type = MLX5_RTE_FLOW_ITEM_TYPE_VLAN;
3610 sfx_items->type = RTE_FLOW_ITEM_TYPE_END;
3612 tag_spec = (struct mlx5_rte_flow_item_tag *)sfx_items;
3613 tag_spec->data = tag_id << MLX5_MTR_COLOR_BITS;
3614 tag_spec->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
3615 tag_mask = tag_spec + 1;
3616 tag_mask->data = 0xffffff00;
3617 tag_item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
3618 tag_item->spec = tag_spec;
3619 tag_item->last = NULL;
3620 tag_item->mask = tag_mask;
3625 * Split action list having QUEUE/RSS for metadata register copy.
3627 * Once Q/RSS action is detected in user's action list, the flow action
3628 * should be split in order to copy metadata registers, which will happen in
3630 * - CQE->flow_tag := reg_c[1] (MARK)
3631 * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
3632 * The Q/RSS action will be performed on RX_ACT_TBL after passing by RX_CP_TBL.
3633 * This is because the last action of each flow must be a terminal action
3634 * (QUEUE, RSS or DROP).
3636 * Flow ID must be allocated to identify actions in the RX_ACT_TBL and it is
3637 * stored and kept in the mlx5_flow structure per each sub_flow.
3639 * The Q/RSS action is replaced with,
3640 * - SET_TAG, setting the allocated flow ID to reg_c[2].
3641 * And the following JUMP action is added at the end,
3642 * - JUMP, to RX_CP_TBL.
3644 * A flow to perform remained Q/RSS action will be created in RX_ACT_TBL by
3645 * flow_create_split_metadata() routine. The flow will look like,
3646 * - If flow ID matches (reg_c[2]), perform Q/RSS.
3649 * Pointer to Ethernet device.
3650 * @param[out] split_actions
3651 * Pointer to store split actions to jump to CP_TBL.
3652 * @param[in] actions
3653 * Pointer to the list of original flow actions.
3655 * Pointer to the Q/RSS action.
3656 * @param[in] actions_n
3657 * Number of original actions.
3659 * Perform verbose error reporting if not NULL.
3662 * non-zero unique flow_id on success, otherwise 0 and
3663 * error/rte_error are set.
3666 flow_mreg_split_qrss_prep(struct rte_eth_dev *dev,
3667 struct rte_flow_action *split_actions,
3668 const struct rte_flow_action *actions,
3669 const struct rte_flow_action *qrss,
3670 int actions_n, struct rte_flow_error *error)
3672 struct mlx5_rte_flow_action_set_tag *set_tag;
3673 struct rte_flow_action_jump *jump;
3674 const int qrss_idx = qrss - actions;
3675 uint32_t flow_id = 0;
3679 * Given actions will be split
3680 * - Replace QUEUE/RSS action with SET_TAG to set flow ID.
3681 * - Add jump to mreg CP_TBL.
3682 * As a result, there will be one more action.
3685 memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
3686 set_tag = (void *)(split_actions + actions_n);
3688 * If tag action is not set to void(it means we are not the meter
3689 * suffix flow), add the tag action. Since meter suffix flow already
3690 * has the tag added.
3692 if (split_actions[qrss_idx].type != RTE_FLOW_ACTION_TYPE_VOID) {
3694 * Allocate the new subflow ID. This one is unique within
3695 * device and not shared with representors. Otherwise,
3696 * we would have to resolve multi-thread access synch
3697 * issue. Each flow on the shared device is appended
3698 * with source vport identifier, so the resulting
3699 * flows will be unique in the shared (by master and
3700 * representors) domain even if they have coinciding
3703 flow_id = flow_qrss_get_id(dev);
3705 return rte_flow_error_set(error, ENOMEM,
3706 RTE_FLOW_ERROR_TYPE_ACTION,
3707 NULL, "can't allocate id "
3708 "for split Q/RSS subflow");
3709 /* Internal SET_TAG action to set flow ID. */
3710 *set_tag = (struct mlx5_rte_flow_action_set_tag){
3713 ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
3717 /* Construct new actions array. */
3718 /* Replace QUEUE/RSS action. */
3719 split_actions[qrss_idx] = (struct rte_flow_action){
3720 .type = MLX5_RTE_FLOW_ACTION_TYPE_TAG,
3724 /* JUMP action to jump to mreg copy table (CP_TBL). */
3725 jump = (void *)(set_tag + 1);
3726 *jump = (struct rte_flow_action_jump){
3727 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
3729 split_actions[actions_n - 2] = (struct rte_flow_action){
3730 .type = RTE_FLOW_ACTION_TYPE_JUMP,
3733 split_actions[actions_n - 1] = (struct rte_flow_action){
3734 .type = RTE_FLOW_ACTION_TYPE_END,
3740 * Extend the given action list for Tx metadata copy.
3742 * Copy the given action list to the ext_actions and add flow metadata register
3743 * copy action in order to copy reg_a set by WQE to reg_c[0].
3745 * @param[out] ext_actions
3746 * Pointer to the extended action list.
3747 * @param[in] actions
3748 * Pointer to the list of actions.
3749 * @param[in] actions_n
3750 * Number of actions in the list.
3752 * Perform verbose error reporting if not NULL.
3753 * @param[in] encap_idx
3754 * The encap action inndex.
3757 * 0 on success, negative value otherwise
3760 flow_mreg_tx_copy_prep(struct rte_eth_dev *dev,
3761 struct rte_flow_action *ext_actions,
3762 const struct rte_flow_action *actions,
3763 int actions_n, struct rte_flow_error *error,
3766 struct mlx5_flow_action_copy_mreg *cp_mreg =
3767 (struct mlx5_flow_action_copy_mreg *)
3768 (ext_actions + actions_n + 1);
3771 ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
3775 ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_TX, 0, error);
3780 memcpy(ext_actions, actions, sizeof(*ext_actions) * encap_idx);
3781 if (encap_idx == actions_n - 1) {
3782 ext_actions[actions_n - 1] = (struct rte_flow_action){
3783 .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3786 ext_actions[actions_n] = (struct rte_flow_action){
3787 .type = RTE_FLOW_ACTION_TYPE_END,
3790 ext_actions[encap_idx] = (struct rte_flow_action){
3791 .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3794 memcpy(ext_actions + encap_idx + 1, actions + encap_idx,
3795 sizeof(*ext_actions) * (actions_n - encap_idx));
3801 * The splitting for metadata feature.
3803 * - Q/RSS action on NIC Rx should be split in order to pass by
3804 * the mreg copy table (RX_CP_TBL) and then it jumps to the
3805 * action table (RX_ACT_TBL) which has the split Q/RSS action.
3807 * - All the actions on NIC Tx should have a mreg copy action to
3808 * copy reg_a from WQE to reg_c[0].
3811 * Pointer to Ethernet device.
3813 * Parent flow structure pointer.
3814 * @param[in] prefix_layers
3815 * Prefix flow layer flags.
3817 * Flow rule attributes.
3819 * Pattern specification (list terminated by the END pattern item).
3820 * @param[in] actions
3821 * Associated actions (list terminated by the END action).
3822 * @param[in] external
3823 * This flow rule is created by request external to PMD.
3825 * Perform verbose error reporting if not NULL.
3827 * 0 on success, negative value otherwise
3830 flow_create_split_metadata(struct rte_eth_dev *dev,
3831 struct rte_flow *flow,
3832 uint64_t prefix_layers,
3833 const struct rte_flow_attr *attr,
3834 const struct rte_flow_item items[],
3835 const struct rte_flow_action actions[],
3836 bool external, struct rte_flow_error *error)
3838 struct mlx5_priv *priv = dev->data->dev_private;
3839 struct mlx5_dev_config *config = &priv->config;
3840 const struct rte_flow_action *qrss = NULL;
3841 struct rte_flow_action *ext_actions = NULL;
3842 struct mlx5_flow *dev_flow = NULL;
3843 uint32_t qrss_id = 0;
3850 /* Check whether extensive metadata feature is engaged. */
3851 if (!config->dv_flow_en ||
3852 config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
3853 !mlx5_flow_ext_mreg_supported(dev))
3854 return flow_create_split_inner(dev, flow, NULL, prefix_layers,
3855 attr, items, actions, external,
3857 actions_n = flow_parse_metadata_split_actions_info(actions, &qrss,
3860 /* Exclude hairpin flows from splitting. */
3861 if (qrss->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
3862 const struct rte_flow_action_queue *queue;
3865 if (mlx5_rxq_get_type(dev, queue->index) ==
3866 MLX5_RXQ_TYPE_HAIRPIN)
3868 } else if (qrss->type == RTE_FLOW_ACTION_TYPE_RSS) {
3869 const struct rte_flow_action_rss *rss;
3872 if (mlx5_rxq_get_type(dev, rss->queue[0]) ==
3873 MLX5_RXQ_TYPE_HAIRPIN)
3878 /* Check if it is in meter suffix table. */
3879 mtr_sfx = attr->group == (attr->transfer ?
3880 (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
3881 MLX5_FLOW_TABLE_LEVEL_SUFFIX);
3883 * Q/RSS action on NIC Rx should be split in order to pass by
3884 * the mreg copy table (RX_CP_TBL) and then it jumps to the
3885 * action table (RX_ACT_TBL) which has the split Q/RSS action.
3887 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
3888 sizeof(struct rte_flow_action_set_tag) +
3889 sizeof(struct rte_flow_action_jump);
3890 ext_actions = rte_zmalloc(__func__, act_size, 0);
3892 return rte_flow_error_set(error, ENOMEM,
3893 RTE_FLOW_ERROR_TYPE_ACTION,
3894 NULL, "no memory to split "
3897 * If we are the suffix flow of meter, tag already exist.
3898 * Set the tag action to void.
3901 ext_actions[qrss - actions].type =
3902 RTE_FLOW_ACTION_TYPE_VOID;
3904 ext_actions[qrss - actions].type =
3905 MLX5_RTE_FLOW_ACTION_TYPE_TAG;
3907 * Create the new actions list with removed Q/RSS action
3908 * and appended set tag and jump to register copy table
3909 * (RX_CP_TBL). We should preallocate unique tag ID here
3910 * in advance, because it is needed for set tag action.
3912 qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
3913 qrss, actions_n, error);
3914 if (!mtr_sfx && !qrss_id) {
3918 } else if (attr->egress && !attr->transfer) {
3920 * All the actions on NIC Tx should have a metadata register
3921 * copy action to copy reg_a from WQE to reg_c[meta]
3923 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
3924 sizeof(struct mlx5_flow_action_copy_mreg);
3925 ext_actions = rte_zmalloc(__func__, act_size, 0);
3927 return rte_flow_error_set(error, ENOMEM,
3928 RTE_FLOW_ERROR_TYPE_ACTION,
3929 NULL, "no memory to split "
3931 /* Create the action list appended with copy register. */
3932 ret = flow_mreg_tx_copy_prep(dev, ext_actions, actions,
3933 actions_n, error, encap_idx);
3937 /* Add the unmodified original or prefix subflow. */
3938 ret = flow_create_split_inner(dev, flow, &dev_flow, prefix_layers, attr,
3939 items, ext_actions ? ext_actions :
3940 actions, external, error);
3943 MLX5_ASSERT(dev_flow);
3945 const struct rte_flow_attr q_attr = {
3946 .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
3949 /* Internal PMD action to set register. */
3950 struct mlx5_rte_flow_item_tag q_tag_spec = {
3954 struct rte_flow_item q_items[] = {
3956 .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
3957 .spec = &q_tag_spec,
3962 .type = RTE_FLOW_ITEM_TYPE_END,
3965 struct rte_flow_action q_actions[] = {
3971 .type = RTE_FLOW_ACTION_TYPE_END,
3974 uint64_t layers = flow_get_prefix_layer_flags(dev_flow);
3977 * Configure the tag item only if there is no meter subflow.
3978 * Since tag is already marked in the meter suffix subflow
3979 * we can just use the meter suffix items as is.
3982 /* Not meter subflow. */
3983 MLX5_ASSERT(!mtr_sfx);
3985 * Put unique id in prefix flow due to it is destroyed
3986 * after suffix flow and id will be freed after there
3987 * is no actual flows with this id and identifier
3988 * reallocation becomes possible (for example, for
3989 * other flows in other threads).
3991 dev_flow->handle->split_flow_id = qrss_id;
3992 ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0,
3996 q_tag_spec.id = ret;
3999 /* Add suffix subflow to execute Q/RSS. */
4000 ret = flow_create_split_inner(dev, flow, &dev_flow, layers,
4001 &q_attr, mtr_sfx ? items :
4006 /* qrss ID should be freed if failed. */
4008 MLX5_ASSERT(dev_flow);
4013 * We do not destroy the partially created sub_flows in case of error.
4014 * These ones are included into parent flow list and will be destroyed
4015 * by flow_drv_destroy.
4017 flow_qrss_free_id(dev, qrss_id);
4018 rte_free(ext_actions);
4023 * The splitting for meter feature.
4025 * - The meter flow will be split to two flows as prefix and
4026 * suffix flow. The packets make sense only it pass the prefix
4029 * - Reg_C_5 is used for the packet to match betweend prefix and
4033 * Pointer to Ethernet device.
4035 * Parent flow structure pointer.
4037 * Flow rule attributes.
4039 * Pattern specification (list terminated by the END pattern item).
4040 * @param[in] actions
4041 * Associated actions (list terminated by the END action).
4042 * @param[in] external
4043 * This flow rule is created by request external to PMD.
4045 * Perform verbose error reporting if not NULL.
4047 * 0 on success, negative value otherwise
4050 flow_create_split_meter(struct rte_eth_dev *dev,
4051 struct rte_flow *flow,
4052 const struct rte_flow_attr *attr,
4053 const struct rte_flow_item items[],
4054 const struct rte_flow_action actions[],
4055 bool external, struct rte_flow_error *error)
4057 struct mlx5_priv *priv = dev->data->dev_private;
4058 struct rte_flow_action *sfx_actions = NULL;
4059 struct rte_flow_action *pre_actions = NULL;
4060 struct rte_flow_item *sfx_items = NULL;
4061 struct mlx5_flow *dev_flow = NULL;
4062 struct rte_flow_attr sfx_attr = *attr;
4064 uint32_t mtr_tag_id = 0;
4071 actions_n = flow_check_meter_action(actions, &mtr);
4073 /* The five prefix actions: meter, decap, encap, tag, end. */
4074 act_size = sizeof(struct rte_flow_action) * (actions_n + 5) +
4075 sizeof(struct mlx5_rte_flow_action_set_tag);
4076 /* tag, vlan, port id, end. */
4077 #define METER_SUFFIX_ITEM 4
4078 item_size = sizeof(struct rte_flow_item) * METER_SUFFIX_ITEM +
4079 sizeof(struct mlx5_rte_flow_item_tag) * 2;
4080 sfx_actions = rte_zmalloc(__func__, (act_size + item_size), 0);
4082 return rte_flow_error_set(error, ENOMEM,
4083 RTE_FLOW_ERROR_TYPE_ACTION,
4084 NULL, "no memory to split "
4086 sfx_items = (struct rte_flow_item *)((char *)sfx_actions +
4088 pre_actions = sfx_actions + actions_n;
4089 mtr_tag_id = flow_meter_split_prep(dev, items, sfx_items,
4090 actions, sfx_actions,
4096 /* Add the prefix subflow. */
4097 ret = flow_create_split_inner(dev, flow, &dev_flow, 0, attr,
4098 items, pre_actions, external,
4104 dev_flow->handle->split_flow_id = mtr_tag_id;
4105 /* Setting the sfx group atrr. */
4106 sfx_attr.group = sfx_attr.transfer ?
4107 (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
4108 MLX5_FLOW_TABLE_LEVEL_SUFFIX;
4110 /* Add the prefix subflow. */
4111 ret = flow_create_split_metadata(dev, flow, dev_flow ?
4112 flow_get_prefix_layer_flags(dev_flow) :
4114 sfx_items ? sfx_items : items,
4115 sfx_actions ? sfx_actions : actions,
4119 rte_free(sfx_actions);
4124 * Split the flow to subflow set. The splitters might be linked
4125 * in the chain, like this:
4126 * flow_create_split_outer() calls:
4127 * flow_create_split_meter() calls:
4128 * flow_create_split_metadata(meter_subflow_0) calls:
4129 * flow_create_split_inner(metadata_subflow_0)
4130 * flow_create_split_inner(metadata_subflow_1)
4131 * flow_create_split_inner(metadata_subflow_2)
4132 * flow_create_split_metadata(meter_subflow_1) calls:
4133 * flow_create_split_inner(metadata_subflow_0)
4134 * flow_create_split_inner(metadata_subflow_1)
4135 * flow_create_split_inner(metadata_subflow_2)
4137 * This provide flexible way to add new levels of flow splitting.
4138 * The all of successfully created subflows are included to the
4139 * parent flow dev_flow list.
4142 * Pointer to Ethernet device.
4144 * Parent flow structure pointer.
4146 * Flow rule attributes.
4148 * Pattern specification (list terminated by the END pattern item).
4149 * @param[in] actions
4150 * Associated actions (list terminated by the END action).
4151 * @param[in] external
4152 * This flow rule is created by request external to PMD.
4154 * Perform verbose error reporting if not NULL.
4156 * 0 on success, negative value otherwise
4159 flow_create_split_outer(struct rte_eth_dev *dev,
4160 struct rte_flow *flow,
4161 const struct rte_flow_attr *attr,
4162 const struct rte_flow_item items[],
4163 const struct rte_flow_action actions[],
4164 bool external, struct rte_flow_error *error)
4168 ret = flow_create_split_meter(dev, flow, attr, items,
4169 actions, external, error);
4170 MLX5_ASSERT(ret <= 0);
4175 * Create a flow and add it to @p list.
4178 * Pointer to Ethernet device.
4180 * Pointer to a TAILQ flow list. If this parameter NULL,
4181 * no list insertion occurred, flow is just created,
4182 * this is caller's responsibility to track the
4185 * Flow rule attributes.
4187 * Pattern specification (list terminated by the END pattern item).
4188 * @param[in] actions
4189 * Associated actions (list terminated by the END action).
4190 * @param[in] external
4191 * This flow rule is created by request external to PMD.
4193 * Perform verbose error reporting if not NULL.
4196 * A flow on success, NULL otherwise and rte_errno is set.
4198 static struct rte_flow *
4199 flow_list_create(struct rte_eth_dev *dev, struct mlx5_flows *list,
4200 const struct rte_flow_attr *attr,
4201 const struct rte_flow_item items[],
4202 const struct rte_flow_action actions[],
4203 bool external, struct rte_flow_error *error)
4205 struct mlx5_priv *priv = dev->data->dev_private;
4206 struct rte_flow *flow = NULL;
4207 struct mlx5_flow *dev_flow;
4208 const struct rte_flow_action_rss *rss;
4210 struct rte_flow_expand_rss buf;
4211 uint8_t buffer[2048];
4214 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
4215 uint8_t buffer[2048];
4218 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
4219 uint8_t buffer[2048];
4220 } actions_hairpin_tx;
4222 struct rte_flow_item items[MLX5_MAX_SPLIT_ITEMS];
4223 uint8_t buffer[2048];
4225 struct rte_flow_expand_rss *buf = &expand_buffer.buf;
4226 const struct rte_flow_action *p_actions_rx = actions;
4229 int hairpin_flow = 0;
4230 uint32_t hairpin_id = 0;
4231 struct rte_flow_attr attr_tx = { .priority = 0 };
4232 int ret = flow_drv_validate(dev, attr, items, p_actions_rx, external,
4237 hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
4238 if (hairpin_flow > 0) {
4239 if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
4243 flow_hairpin_split(dev, actions, actions_rx.actions,
4244 actions_hairpin_tx.actions, items_tx.items,
4246 p_actions_rx = actions_rx.actions;
4248 flow_size = sizeof(struct rte_flow);
4249 rss = flow_get_rss_action(p_actions_rx);
4251 flow_size += RTE_ALIGN_CEIL(rss->queue_num * sizeof(uint16_t),
4254 flow_size += RTE_ALIGN_CEIL(sizeof(uint16_t), sizeof(void *));
4255 flow = rte_calloc(__func__, 1, flow_size, 0);
4258 goto error_before_flow;
4260 flow->drv_type = flow_get_drv_type(dev, attr);
4261 if (hairpin_id != 0)
4262 flow->hairpin_flow_id = hairpin_id;
4263 MLX5_ASSERT(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
4264 flow->drv_type < MLX5_FLOW_TYPE_MAX);
4265 flow->rss.queue = (void *)(flow + 1);
4268 * The following information is required by
4269 * mlx5_flow_hashfields_adjust() in advance.
4271 flow->rss.level = rss->level;
4272 /* RSS type 0 indicates default RSS type (ETH_RSS_IP). */
4273 flow->rss.types = !rss->types ? ETH_RSS_IP : rss->types;
4275 flow->dev_handles = 0;
4276 if (rss && rss->types) {
4277 unsigned int graph_root;
4279 graph_root = find_graph_root(items, rss->level);
4280 ret = rte_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
4282 mlx5_support_expansion,
4284 MLX5_ASSERT(ret > 0 &&
4285 (unsigned int)ret < sizeof(expand_buffer.buffer));
4288 buf->entry[0].pattern = (void *)(uintptr_t)items;
4291 * Record the start index when there is a nested call. All sub-flows
4292 * need to be translated before another calling.
4293 * No need to use ping-pong buffer to save memory here.
4295 if (priv->flow_idx) {
4296 MLX5_ASSERT(!priv->flow_nested_idx);
4297 priv->flow_nested_idx = priv->flow_idx;
4299 for (i = 0; i < buf->entries; ++i) {
4301 * The splitter may create multiple dev_flows,
4302 * depending on configuration. In the simplest
4303 * case it just creates unmodified original flow.
4305 ret = flow_create_split_outer(dev, flow, attr,
4306 buf->entry[i].pattern,
4307 p_actions_rx, external,
4312 /* Create the tx flow. */
4314 attr_tx.group = MLX5_HAIRPIN_TX_TABLE;
4315 attr_tx.ingress = 0;
4317 dev_flow = flow_drv_prepare(dev, flow, &attr_tx, items_tx.items,
4318 actions_hairpin_tx.actions, error);
4321 dev_flow->flow = flow;
4322 dev_flow->external = 0;
4323 SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
4324 dev_flow->handle, next);
4325 ret = flow_drv_translate(dev, dev_flow, &attr_tx,
4327 actions_hairpin_tx.actions, error);
4332 * Update the metadata register copy table. If extensive
4333 * metadata feature is enabled and registers are supported
4334 * we might create the extra rte_flow for each unique
4335 * MARK/FLAG action ID.
4337 * The table is updated for ingress Flows only, because
4338 * the egress Flows belong to the different device and
4339 * copy table should be updated in peer NIC Rx domain.
4341 if (attr->ingress &&
4342 (external || attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP)) {
4343 ret = flow_mreg_update_copy_table(dev, flow, actions, error);
4348 * If the flow is external (from application) OR device is started, then
4349 * the flow will be applied immediately.
4351 if (external || dev->data->dev_started) {
4352 ret = flow_drv_apply(dev, flow, error);
4357 TAILQ_INSERT_TAIL(list, flow, next);
4358 flow_rxq_flags_set(dev, flow);
4359 /* Nested flow creation index recovery. */
4360 priv->flow_idx = priv->flow_nested_idx;
4361 if (priv->flow_nested_idx)
4362 priv->flow_nested_idx = 0;
4366 ret = rte_errno; /* Save rte_errno before cleanup. */
4367 flow_mreg_del_copy_action(dev, flow);
4368 flow_drv_destroy(dev, flow);
4370 rte_errno = ret; /* Restore rte_errno. */
4374 mlx5_flow_id_release(priv->sh->flow_id_pool,
4377 priv->flow_idx = priv->flow_nested_idx;
4378 if (priv->flow_nested_idx)
4379 priv->flow_nested_idx = 0;
4384 * Create a dedicated flow rule on e-switch table 0 (root table), to direct all
4385 * incoming packets to table 1.
4387 * Other flow rules, requested for group n, will be created in
4388 * e-switch table n+1.
4389 * Jump action to e-switch group n will be created to group n+1.
4391 * Used when working in switchdev mode, to utilise advantages of table 1
4395 * Pointer to Ethernet device.
4398 * Pointer to flow on success, NULL otherwise and rte_errno is set.
4401 mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev)
4403 const struct rte_flow_attr attr = {
4410 const struct rte_flow_item pattern = {
4411 .type = RTE_FLOW_ITEM_TYPE_END,
4413 struct rte_flow_action_jump jump = {
4416 const struct rte_flow_action actions[] = {
4418 .type = RTE_FLOW_ACTION_TYPE_JUMP,
4422 .type = RTE_FLOW_ACTION_TYPE_END,
4425 struct mlx5_priv *priv = dev->data->dev_private;
4426 struct rte_flow_error error;
4428 return flow_list_create(dev, &priv->ctrl_flows, &attr, &pattern,
4429 actions, false, &error);
4435 * @see rte_flow_create()
4439 mlx5_flow_create(struct rte_eth_dev *dev,
4440 const struct rte_flow_attr *attr,
4441 const struct rte_flow_item items[],
4442 const struct rte_flow_action actions[],
4443 struct rte_flow_error *error)
4445 struct mlx5_priv *priv = dev->data->dev_private;
4448 * If the device is not started yet, it is not allowed to created a
4449 * flow from application. PMD default flows and traffic control flows
4452 if (unlikely(!dev->data->dev_started)) {
4454 DRV_LOG(DEBUG, "port %u is not started when "
4455 "inserting a flow", dev->data->port_id);
4458 return flow_list_create(dev, &priv->flows,
4459 attr, items, actions, true, error);
4463 * Destroy a flow in a list.
4466 * Pointer to Ethernet device.
4468 * Pointer to a TAILQ flow list. If this parameter NULL,
4469 * there is no flow removal from the list.
4474 flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
4475 struct rte_flow *flow)
4477 struct mlx5_priv *priv = dev->data->dev_private;
4480 * Update RX queue flags only if port is started, otherwise it is
4483 if (dev->data->dev_started)
4484 flow_rxq_flags_trim(dev, flow);
4485 if (flow->hairpin_flow_id)
4486 mlx5_flow_id_release(priv->sh->flow_id_pool,
4487 flow->hairpin_flow_id);
4488 flow_drv_destroy(dev, flow);
4490 TAILQ_REMOVE(list, flow, next);
4491 flow_mreg_del_copy_action(dev, flow);
4492 rte_free(flow->fdir);
4497 * Destroy all flows.
4500 * Pointer to Ethernet device.
4502 * Pointer to a TAILQ flow list.
4504 * If flushing is called avtively.
4507 mlx5_flow_list_flush(struct rte_eth_dev *dev, struct mlx5_flows *list,
4510 uint32_t num_flushed = 0;
4512 while (!TAILQ_EMPTY(list)) {
4513 struct rte_flow *flow;
4515 flow = TAILQ_FIRST(list);
4516 flow_list_destroy(dev, list, flow);
4520 DRV_LOG(INFO, "port %u: %u flows flushed before stopping",
4521 dev->data->port_id, num_flushed);
4529 * Pointer to Ethernet device.
4531 * Pointer to a TAILQ flow list.
4534 mlx5_flow_stop(struct rte_eth_dev *dev, struct mlx5_flows *list)
4536 struct rte_flow *flow;
4538 TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next) {
4539 flow_drv_remove(dev, flow);
4540 flow_mreg_stop_copy_action(dev, flow);
4542 flow_mreg_del_default_copy_action(dev);
4543 flow_rxq_flags_clear(dev);
4550 * Pointer to Ethernet device.
4552 * Pointer to a TAILQ flow list.
4555 * 0 on success, a negative errno value otherwise and rte_errno is set.
4558 mlx5_flow_start(struct rte_eth_dev *dev, struct mlx5_flows *list)
4560 struct rte_flow *flow;
4561 struct rte_flow_error error;
4564 /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
4565 ret = flow_mreg_add_default_copy_action(dev, &error);
4568 /* Apply Flows created by application. */
4569 TAILQ_FOREACH(flow, list, next) {
4570 ret = flow_mreg_start_copy_action(dev, flow);
4573 ret = flow_drv_apply(dev, flow, &error);
4576 flow_rxq_flags_set(dev, flow);
4580 ret = rte_errno; /* Save rte_errno before cleanup. */
4581 mlx5_flow_stop(dev, list);
4582 rte_errno = ret; /* Restore rte_errno. */
4587 * Stop all default actions for flows.
4590 * Pointer to Ethernet device.
4593 mlx5_flow_stop_default(struct rte_eth_dev *dev)
4595 flow_mreg_del_default_copy_action(dev);
4599 * Start all default actions for flows.
4602 * Pointer to Ethernet device.
4604 * 0 on success, a negative errno value otherwise and rte_errno is set.
4607 mlx5_flow_start_default(struct rte_eth_dev *dev)
4609 struct rte_flow_error error;
4611 /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
4612 return flow_mreg_add_default_copy_action(dev, &error);
4616 * Allocate intermediate resources for flow creation.
4619 * Pointer to Ethernet device.
4622 mlx5_flow_alloc_intermediate(struct rte_eth_dev *dev)
4624 struct mlx5_priv *priv = dev->data->dev_private;
4626 if (!priv->inter_flows)
4627 priv->inter_flows = rte_calloc(__func__, MLX5_NUM_MAX_DEV_FLOWS,
4628 sizeof(struct mlx5_flow), 0);
4629 /* Reset the index. */
4631 priv->flow_nested_idx = 0;
4635 * Free intermediate resources for flows.
4638 * Pointer to Ethernet device.
4641 mlx5_flow_free_intermediate(struct rte_eth_dev *dev)
4643 struct mlx5_priv *priv = dev->data->dev_private;
4645 rte_free(priv->inter_flows);
4646 priv->inter_flows = NULL;
4650 * Verify the flow list is empty
4653 * Pointer to Ethernet device.
4655 * @return the number of flows not released.
4658 mlx5_flow_verify(struct rte_eth_dev *dev)
4660 struct mlx5_priv *priv = dev->data->dev_private;
4661 struct rte_flow *flow;
4664 TAILQ_FOREACH(flow, &priv->flows, next) {
4665 DRV_LOG(DEBUG, "port %u flow %p still referenced",
4666 dev->data->port_id, (void *)flow);
4673 * Enable default hairpin egress flow.
4676 * Pointer to Ethernet device.
4681 * 0 on success, a negative errno value otherwise and rte_errno is set.
4684 mlx5_ctrl_flow_source_queue(struct rte_eth_dev *dev,
4687 struct mlx5_priv *priv = dev->data->dev_private;
4688 const struct rte_flow_attr attr = {
4692 struct mlx5_rte_flow_item_tx_queue queue_spec = {
4695 struct mlx5_rte_flow_item_tx_queue queue_mask = {
4696 .queue = UINT32_MAX,
4698 struct rte_flow_item items[] = {
4700 .type = MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE,
4701 .spec = &queue_spec,
4703 .mask = &queue_mask,
4706 .type = RTE_FLOW_ITEM_TYPE_END,
4709 struct rte_flow_action_jump jump = {
4710 .group = MLX5_HAIRPIN_TX_TABLE,
4712 struct rte_flow_action actions[2];
4713 struct rte_flow *flow;
4714 struct rte_flow_error error;
4716 actions[0].type = RTE_FLOW_ACTION_TYPE_JUMP;
4717 actions[0].conf = &jump;
4718 actions[1].type = RTE_FLOW_ACTION_TYPE_END;
4719 flow = flow_list_create(dev, &priv->ctrl_flows,
4720 &attr, items, actions, false, &error);
4723 "Failed to create ctrl flow: rte_errno(%d),"
4724 " type(%d), message(%s)",
4725 rte_errno, error.type,
4726 error.message ? error.message : " (no stated reason)");
4733 * Enable a control flow configured from the control plane.
4736 * Pointer to Ethernet device.
4738 * An Ethernet flow spec to apply.
4740 * An Ethernet flow mask to apply.
4742 * A VLAN flow spec to apply.
4744 * A VLAN flow mask to apply.
4747 * 0 on success, a negative errno value otherwise and rte_errno is set.
4750 mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
4751 struct rte_flow_item_eth *eth_spec,
4752 struct rte_flow_item_eth *eth_mask,
4753 struct rte_flow_item_vlan *vlan_spec,
4754 struct rte_flow_item_vlan *vlan_mask)
4756 struct mlx5_priv *priv = dev->data->dev_private;
4757 const struct rte_flow_attr attr = {
4759 .priority = MLX5_FLOW_PRIO_RSVD,
4761 struct rte_flow_item items[] = {
4763 .type = RTE_FLOW_ITEM_TYPE_ETH,
4769 .type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
4770 RTE_FLOW_ITEM_TYPE_END,
4776 .type = RTE_FLOW_ITEM_TYPE_END,
4779 uint16_t queue[priv->reta_idx_n];
4780 struct rte_flow_action_rss action_rss = {
4781 .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
4783 .types = priv->rss_conf.rss_hf,
4784 .key_len = priv->rss_conf.rss_key_len,
4785 .queue_num = priv->reta_idx_n,
4786 .key = priv->rss_conf.rss_key,
4789 struct rte_flow_action actions[] = {
4791 .type = RTE_FLOW_ACTION_TYPE_RSS,
4792 .conf = &action_rss,
4795 .type = RTE_FLOW_ACTION_TYPE_END,
4798 struct rte_flow *flow;
4799 struct rte_flow_error error;
4802 if (!priv->reta_idx_n || !priv->rxqs_n) {
4805 for (i = 0; i != priv->reta_idx_n; ++i)
4806 queue[i] = (*priv->reta_idx)[i];
4807 flow = flow_list_create(dev, &priv->ctrl_flows,
4808 &attr, items, actions, false, &error);
4815 * Enable a flow control configured from the control plane.
4818 * Pointer to Ethernet device.
4820 * An Ethernet flow spec to apply.
4822 * An Ethernet flow mask to apply.
4825 * 0 on success, a negative errno value otherwise and rte_errno is set.
4828 mlx5_ctrl_flow(struct rte_eth_dev *dev,
4829 struct rte_flow_item_eth *eth_spec,
4830 struct rte_flow_item_eth *eth_mask)
4832 return mlx5_ctrl_flow_vlan(dev, eth_spec, eth_mask, NULL, NULL);
4838 * @see rte_flow_destroy()
4842 mlx5_flow_destroy(struct rte_eth_dev *dev,
4843 struct rte_flow *flow,
4844 struct rte_flow_error *error __rte_unused)
4846 struct mlx5_priv *priv = dev->data->dev_private;
4848 flow_list_destroy(dev, &priv->flows, flow);
4853 * Destroy all flows.
4855 * @see rte_flow_flush()
4859 mlx5_flow_flush(struct rte_eth_dev *dev,
4860 struct rte_flow_error *error __rte_unused)
4862 struct mlx5_priv *priv = dev->data->dev_private;
4864 mlx5_flow_list_flush(dev, &priv->flows, false);
4871 * @see rte_flow_isolate()
4875 mlx5_flow_isolate(struct rte_eth_dev *dev,
4877 struct rte_flow_error *error)
4879 struct mlx5_priv *priv = dev->data->dev_private;
4881 if (dev->data->dev_started) {
4882 rte_flow_error_set(error, EBUSY,
4883 RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
4885 "port must be stopped first");
4888 priv->isolated = !!enable;
4890 dev->dev_ops = &mlx5_dev_ops_isolate;
4892 dev->dev_ops = &mlx5_dev_ops;
4899 * @see rte_flow_query()
4903 flow_drv_query(struct rte_eth_dev *dev,
4904 struct rte_flow *flow,
4905 const struct rte_flow_action *actions,
4907 struct rte_flow_error *error)
4909 const struct mlx5_flow_driver_ops *fops;
4910 enum mlx5_flow_drv_type ftype = flow->drv_type;
4912 MLX5_ASSERT(ftype > MLX5_FLOW_TYPE_MIN && ftype < MLX5_FLOW_TYPE_MAX);
4913 fops = flow_get_drv_ops(ftype);
4915 return fops->query(dev, flow, actions, data, error);
4921 * @see rte_flow_query()
4925 mlx5_flow_query(struct rte_eth_dev *dev,
4926 struct rte_flow *flow,
4927 const struct rte_flow_action *actions,
4929 struct rte_flow_error *error)
4933 ret = flow_drv_query(dev, flow, actions, data, error);
4940 * Convert a flow director filter to a generic flow.
4943 * Pointer to Ethernet device.
4944 * @param fdir_filter
4945 * Flow director filter to add.
4947 * Generic flow parameters structure.
4950 * 0 on success, a negative errno value otherwise and rte_errno is set.
4953 flow_fdir_filter_convert(struct rte_eth_dev *dev,
4954 const struct rte_eth_fdir_filter *fdir_filter,
4955 struct mlx5_fdir *attributes)
4957 struct mlx5_priv *priv = dev->data->dev_private;
4958 const struct rte_eth_fdir_input *input = &fdir_filter->input;
4959 const struct rte_eth_fdir_masks *mask =
4960 &dev->data->dev_conf.fdir_conf.mask;
4962 /* Validate queue number. */
4963 if (fdir_filter->action.rx_queue >= priv->rxqs_n) {
4964 DRV_LOG(ERR, "port %u invalid queue number %d",
4965 dev->data->port_id, fdir_filter->action.rx_queue);
4969 attributes->attr.ingress = 1;
4970 attributes->items[0] = (struct rte_flow_item) {
4971 .type = RTE_FLOW_ITEM_TYPE_ETH,
4972 .spec = &attributes->l2,
4973 .mask = &attributes->l2_mask,
4975 switch (fdir_filter->action.behavior) {
4976 case RTE_ETH_FDIR_ACCEPT:
4977 attributes->actions[0] = (struct rte_flow_action){
4978 .type = RTE_FLOW_ACTION_TYPE_QUEUE,
4979 .conf = &attributes->queue,
4982 case RTE_ETH_FDIR_REJECT:
4983 attributes->actions[0] = (struct rte_flow_action){
4984 .type = RTE_FLOW_ACTION_TYPE_DROP,
4988 DRV_LOG(ERR, "port %u invalid behavior %d",
4990 fdir_filter->action.behavior);
4991 rte_errno = ENOTSUP;
4994 attributes->queue.index = fdir_filter->action.rx_queue;
4996 switch (fdir_filter->input.flow_type) {
4997 case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
4998 case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
4999 case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
5000 attributes->l3.ipv4.hdr = (struct rte_ipv4_hdr){
5001 .src_addr = input->flow.ip4_flow.src_ip,
5002 .dst_addr = input->flow.ip4_flow.dst_ip,
5003 .time_to_live = input->flow.ip4_flow.ttl,
5004 .type_of_service = input->flow.ip4_flow.tos,
5006 attributes->l3_mask.ipv4.hdr = (struct rte_ipv4_hdr){
5007 .src_addr = mask->ipv4_mask.src_ip,
5008 .dst_addr = mask->ipv4_mask.dst_ip,
5009 .time_to_live = mask->ipv4_mask.ttl,
5010 .type_of_service = mask->ipv4_mask.tos,
5011 .next_proto_id = mask->ipv4_mask.proto,
5013 attributes->items[1] = (struct rte_flow_item){
5014 .type = RTE_FLOW_ITEM_TYPE_IPV4,
5015 .spec = &attributes->l3,
5016 .mask = &attributes->l3_mask,
5019 case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
5020 case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
5021 case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
5022 attributes->l3.ipv6.hdr = (struct rte_ipv6_hdr){
5023 .hop_limits = input->flow.ipv6_flow.hop_limits,
5024 .proto = input->flow.ipv6_flow.proto,
5027 memcpy(attributes->l3.ipv6.hdr.src_addr,
5028 input->flow.ipv6_flow.src_ip,
5029 RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
5030 memcpy(attributes->l3.ipv6.hdr.dst_addr,
5031 input->flow.ipv6_flow.dst_ip,
5032 RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
5033 memcpy(attributes->l3_mask.ipv6.hdr.src_addr,
5034 mask->ipv6_mask.src_ip,
5035 RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
5036 memcpy(attributes->l3_mask.ipv6.hdr.dst_addr,
5037 mask->ipv6_mask.dst_ip,
5038 RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
5039 attributes->items[1] = (struct rte_flow_item){
5040 .type = RTE_FLOW_ITEM_TYPE_IPV6,
5041 .spec = &attributes->l3,
5042 .mask = &attributes->l3_mask,
5046 DRV_LOG(ERR, "port %u invalid flow type%d",
5047 dev->data->port_id, fdir_filter->input.flow_type);
5048 rte_errno = ENOTSUP;
5052 switch (fdir_filter->input.flow_type) {
5053 case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
5054 attributes->l4.udp.hdr = (struct rte_udp_hdr){
5055 .src_port = input->flow.udp4_flow.src_port,
5056 .dst_port = input->flow.udp4_flow.dst_port,
5058 attributes->l4_mask.udp.hdr = (struct rte_udp_hdr){
5059 .src_port = mask->src_port_mask,
5060 .dst_port = mask->dst_port_mask,
5062 attributes->items[2] = (struct rte_flow_item){
5063 .type = RTE_FLOW_ITEM_TYPE_UDP,
5064 .spec = &attributes->l4,
5065 .mask = &attributes->l4_mask,
5068 case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
5069 attributes->l4.tcp.hdr = (struct rte_tcp_hdr){
5070 .src_port = input->flow.tcp4_flow.src_port,
5071 .dst_port = input->flow.tcp4_flow.dst_port,
5073 attributes->l4_mask.tcp.hdr = (struct rte_tcp_hdr){
5074 .src_port = mask->src_port_mask,
5075 .dst_port = mask->dst_port_mask,
5077 attributes->items[2] = (struct rte_flow_item){
5078 .type = RTE_FLOW_ITEM_TYPE_TCP,
5079 .spec = &attributes->l4,
5080 .mask = &attributes->l4_mask,
5083 case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
5084 attributes->l4.udp.hdr = (struct rte_udp_hdr){
5085 .src_port = input->flow.udp6_flow.src_port,
5086 .dst_port = input->flow.udp6_flow.dst_port,
5088 attributes->l4_mask.udp.hdr = (struct rte_udp_hdr){
5089 .src_port = mask->src_port_mask,
5090 .dst_port = mask->dst_port_mask,
5092 attributes->items[2] = (struct rte_flow_item){
5093 .type = RTE_FLOW_ITEM_TYPE_UDP,
5094 .spec = &attributes->l4,
5095 .mask = &attributes->l4_mask,
5098 case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
5099 attributes->l4.tcp.hdr = (struct rte_tcp_hdr){
5100 .src_port = input->flow.tcp6_flow.src_port,
5101 .dst_port = input->flow.tcp6_flow.dst_port,
5103 attributes->l4_mask.tcp.hdr = (struct rte_tcp_hdr){
5104 .src_port = mask->src_port_mask,
5105 .dst_port = mask->dst_port_mask,
5107 attributes->items[2] = (struct rte_flow_item){
5108 .type = RTE_FLOW_ITEM_TYPE_TCP,
5109 .spec = &attributes->l4,
5110 .mask = &attributes->l4_mask,
5113 case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
5114 case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
5117 DRV_LOG(ERR, "port %u invalid flow type%d",
5118 dev->data->port_id, fdir_filter->input.flow_type);
5119 rte_errno = ENOTSUP;
5125 #define FLOW_FDIR_CMP(f1, f2, fld) \
5126 memcmp(&(f1)->fld, &(f2)->fld, sizeof(f1->fld))
5129 * Compare two FDIR flows. If items and actions are identical, the two flows are
5133 * Pointer to Ethernet device.
5135 * FDIR flow to compare.
5137 * FDIR flow to compare.
5140 * Zero on match, 1 otherwise.
5143 flow_fdir_cmp(const struct mlx5_fdir *f1, const struct mlx5_fdir *f2)
5145 if (FLOW_FDIR_CMP(f1, f2, attr) ||
5146 FLOW_FDIR_CMP(f1, f2, l2) ||
5147 FLOW_FDIR_CMP(f1, f2, l2_mask) ||
5148 FLOW_FDIR_CMP(f1, f2, l3) ||
5149 FLOW_FDIR_CMP(f1, f2, l3_mask) ||
5150 FLOW_FDIR_CMP(f1, f2, l4) ||
5151 FLOW_FDIR_CMP(f1, f2, l4_mask) ||
5152 FLOW_FDIR_CMP(f1, f2, actions[0].type))
5154 if (f1->actions[0].type == RTE_FLOW_ACTION_TYPE_QUEUE &&
5155 FLOW_FDIR_CMP(f1, f2, queue))
5161 * Search device flow list to find out a matched FDIR flow.
5164 * Pointer to Ethernet device.
5166 * FDIR flow to lookup.
5169 * Pointer of flow if found, NULL otherwise.
5171 static struct rte_flow *
5172 flow_fdir_filter_lookup(struct rte_eth_dev *dev, struct mlx5_fdir *fdir_flow)
5174 struct mlx5_priv *priv = dev->data->dev_private;
5175 struct rte_flow *flow = NULL;
5177 MLX5_ASSERT(fdir_flow);
5178 TAILQ_FOREACH(flow, &priv->flows, next) {
5179 if (flow->fdir && !flow_fdir_cmp(flow->fdir, fdir_flow)) {
5180 DRV_LOG(DEBUG, "port %u found FDIR flow %p",
5181 dev->data->port_id, (void *)flow);
5189 * Add new flow director filter and store it in list.
5192 * Pointer to Ethernet device.
5193 * @param fdir_filter
5194 * Flow director filter to add.
5197 * 0 on success, a negative errno value otherwise and rte_errno is set.
5200 flow_fdir_filter_add(struct rte_eth_dev *dev,
5201 const struct rte_eth_fdir_filter *fdir_filter)
5203 struct mlx5_priv *priv = dev->data->dev_private;
5204 struct mlx5_fdir *fdir_flow;
5205 struct rte_flow *flow;
5208 fdir_flow = rte_zmalloc(__func__, sizeof(*fdir_flow), 0);
5213 ret = flow_fdir_filter_convert(dev, fdir_filter, fdir_flow);
5216 flow = flow_fdir_filter_lookup(dev, fdir_flow);
5221 flow = flow_list_create(dev, &priv->flows, &fdir_flow->attr,
5222 fdir_flow->items, fdir_flow->actions, true,
5226 MLX5_ASSERT(!flow->fdir);
5227 flow->fdir = fdir_flow;
5228 DRV_LOG(DEBUG, "port %u created FDIR flow %p",
5229 dev->data->port_id, (void *)flow);
5232 rte_free(fdir_flow);
5237 * Delete specific filter.
5240 * Pointer to Ethernet device.
5241 * @param fdir_filter
5242 * Filter to be deleted.
5245 * 0 on success, a negative errno value otherwise and rte_errno is set.
5248 flow_fdir_filter_delete(struct rte_eth_dev *dev,
5249 const struct rte_eth_fdir_filter *fdir_filter)
5251 struct mlx5_priv *priv = dev->data->dev_private;
5252 struct rte_flow *flow;
5253 struct mlx5_fdir fdir_flow = {
5258 ret = flow_fdir_filter_convert(dev, fdir_filter, &fdir_flow);
5261 flow = flow_fdir_filter_lookup(dev, &fdir_flow);
5266 flow_list_destroy(dev, &priv->flows, flow);
5267 DRV_LOG(DEBUG, "port %u deleted FDIR flow %p",
5268 dev->data->port_id, (void *)flow);
5273 * Update queue for specific filter.
5276 * Pointer to Ethernet device.
5277 * @param fdir_filter
5278 * Filter to be updated.
5281 * 0 on success, a negative errno value otherwise and rte_errno is set.
5284 flow_fdir_filter_update(struct rte_eth_dev *dev,
5285 const struct rte_eth_fdir_filter *fdir_filter)
5289 ret = flow_fdir_filter_delete(dev, fdir_filter);
5292 return flow_fdir_filter_add(dev, fdir_filter);
5296 * Flush all filters.
5299 * Pointer to Ethernet device.
5302 flow_fdir_filter_flush(struct rte_eth_dev *dev)
5304 struct mlx5_priv *priv = dev->data->dev_private;
5306 mlx5_flow_list_flush(dev, &priv->flows, false);
5310 * Get flow director information.
5313 * Pointer to Ethernet device.
5314 * @param[out] fdir_info
5315 * Resulting flow director information.
5318 flow_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir_info)
5320 struct rte_eth_fdir_masks *mask =
5321 &dev->data->dev_conf.fdir_conf.mask;
5323 fdir_info->mode = dev->data->dev_conf.fdir_conf.mode;
5324 fdir_info->guarant_spc = 0;
5325 rte_memcpy(&fdir_info->mask, mask, sizeof(fdir_info->mask));
5326 fdir_info->max_flexpayload = 0;
5327 fdir_info->flow_types_mask[0] = 0;
5328 fdir_info->flex_payload_unit = 0;
5329 fdir_info->max_flex_payload_segment_num = 0;
5330 fdir_info->flex_payload_limit = 0;
5331 memset(&fdir_info->flex_conf, 0, sizeof(fdir_info->flex_conf));
5335 * Deal with flow director operations.
5338 * Pointer to Ethernet device.
5340 * Operation to perform.
5342 * Pointer to operation-specific structure.
5345 * 0 on success, a negative errno value otherwise and rte_errno is set.
5348 flow_fdir_ctrl_func(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
5351 enum rte_fdir_mode fdir_mode =
5352 dev->data->dev_conf.fdir_conf.mode;
5354 if (filter_op == RTE_ETH_FILTER_NOP)
5356 if (fdir_mode != RTE_FDIR_MODE_PERFECT &&
5357 fdir_mode != RTE_FDIR_MODE_PERFECT_MAC_VLAN) {
5358 DRV_LOG(ERR, "port %u flow director mode %d not supported",
5359 dev->data->port_id, fdir_mode);
5363 switch (filter_op) {
5364 case RTE_ETH_FILTER_ADD:
5365 return flow_fdir_filter_add(dev, arg);
5366 case RTE_ETH_FILTER_UPDATE:
5367 return flow_fdir_filter_update(dev, arg);
5368 case RTE_ETH_FILTER_DELETE:
5369 return flow_fdir_filter_delete(dev, arg);
5370 case RTE_ETH_FILTER_FLUSH:
5371 flow_fdir_filter_flush(dev);
5373 case RTE_ETH_FILTER_INFO:
5374 flow_fdir_info_get(dev, arg);
5377 DRV_LOG(DEBUG, "port %u unknown operation %u",
5378 dev->data->port_id, filter_op);
5386 * Manage filter operations.
5389 * Pointer to Ethernet device structure.
5390 * @param filter_type
5393 * Operation to perform.
5395 * Pointer to operation-specific structure.
5398 * 0 on success, a negative errno value otherwise and rte_errno is set.
5401 mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
5402 enum rte_filter_type filter_type,
5403 enum rte_filter_op filter_op,
5406 switch (filter_type) {
5407 case RTE_ETH_FILTER_GENERIC:
5408 if (filter_op != RTE_ETH_FILTER_GET) {
5412 *(const void **)arg = &mlx5_flow_ops;
5414 case RTE_ETH_FILTER_FDIR:
5415 return flow_fdir_ctrl_func(dev, filter_op, arg);
5417 DRV_LOG(ERR, "port %u filter type (%d) not supported",
5418 dev->data->port_id, filter_type);
5419 rte_errno = ENOTSUP;
5426 * Create the needed meter and suffix tables.
5429 * Pointer to Ethernet device.
5431 * Pointer to the flow meter.
5434 * Pointer to table set on success, NULL otherwise.
5436 struct mlx5_meter_domains_infos *
5437 mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev,
5438 const struct mlx5_flow_meter *fm)
5440 const struct mlx5_flow_driver_ops *fops;
5442 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5443 return fops->create_mtr_tbls(dev, fm);
5447 * Destroy the meter table set.
5450 * Pointer to Ethernet device.
5452 * Pointer to the meter table set.
5458 mlx5_flow_destroy_mtr_tbls(struct rte_eth_dev *dev,
5459 struct mlx5_meter_domains_infos *tbls)
5461 const struct mlx5_flow_driver_ops *fops;
5463 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5464 return fops->destroy_mtr_tbls(dev, tbls);
5468 * Create policer rules.
5471 * Pointer to Ethernet device.
5473 * Pointer to flow meter structure.
5475 * Pointer to flow attributes.
5478 * 0 on success, -1 otherwise.
5481 mlx5_flow_create_policer_rules(struct rte_eth_dev *dev,
5482 struct mlx5_flow_meter *fm,
5483 const struct rte_flow_attr *attr)
5485 const struct mlx5_flow_driver_ops *fops;
5487 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5488 return fops->create_policer_rules(dev, fm, attr);
5492 * Destroy policer rules.
5495 * Pointer to flow meter structure.
5497 * Pointer to flow attributes.
5500 * 0 on success, -1 otherwise.
5503 mlx5_flow_destroy_policer_rules(struct rte_eth_dev *dev,
5504 struct mlx5_flow_meter *fm,
5505 const struct rte_flow_attr *attr)
5507 const struct mlx5_flow_driver_ops *fops;
5509 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5510 return fops->destroy_policer_rules(dev, fm, attr);
5514 * Allocate a counter.
5517 * Pointer to Ethernet device structure.
5520 * Index to allocated counter on success, 0 otherwise.
5523 mlx5_counter_alloc(struct rte_eth_dev *dev)
5525 const struct mlx5_flow_driver_ops *fops;
5526 struct rte_flow_attr attr = { .transfer = 0 };
5528 if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
5529 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5530 return fops->counter_alloc(dev);
5533 "port %u counter allocate is not supported.",
5534 dev->data->port_id);
5542 * Pointer to Ethernet device structure.
5544 * Index to counter to be free.
5547 mlx5_counter_free(struct rte_eth_dev *dev, uint32_t cnt)
5549 const struct mlx5_flow_driver_ops *fops;
5550 struct rte_flow_attr attr = { .transfer = 0 };
5552 if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
5553 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5554 fops->counter_free(dev, cnt);
5558 "port %u counter free is not supported.",
5559 dev->data->port_id);
5563 * Query counter statistics.
5566 * Pointer to Ethernet device structure.
5568 * Index to counter to query.
5570 * Set to clear counter statistics.
5572 * The counter hits packets number to save.
5574 * The counter hits bytes number to save.
5577 * 0 on success, a negative errno value otherwise.
5580 mlx5_counter_query(struct rte_eth_dev *dev, uint32_t cnt,
5581 bool clear, uint64_t *pkts, uint64_t *bytes)
5583 const struct mlx5_flow_driver_ops *fops;
5584 struct rte_flow_attr attr = { .transfer = 0 };
5586 if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
5587 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
5588 return fops->counter_query(dev, cnt, clear, pkts, bytes);
5591 "port %u counter query is not supported.",
5592 dev->data->port_id);
5596 #define MLX5_POOL_QUERY_FREQ_US 1000000
5599 * Set the periodic procedure for triggering asynchronous batch queries for all
5600 * the counter pools.
5603 * Pointer to mlx5_ibv_shared object.
5606 mlx5_set_query_alarm(struct mlx5_ibv_shared *sh)
5608 struct mlx5_pools_container *cont = MLX5_CNT_CONTAINER(sh, 0, 0);
5609 uint32_t pools_n = rte_atomic16_read(&cont->n_valid);
5612 cont = MLX5_CNT_CONTAINER(sh, 1, 0);
5613 pools_n += rte_atomic16_read(&cont->n_valid);
5614 us = MLX5_POOL_QUERY_FREQ_US / pools_n;
5615 DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
5616 if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
5617 sh->cmng.query_thread_on = 0;
5618 DRV_LOG(ERR, "Cannot reinitialize query alarm");
5620 sh->cmng.query_thread_on = 1;
5625 * The periodic procedure for triggering asynchronous batch queries for all the
5626 * counter pools. This function is probably called by the host thread.
5629 * The parameter for the alarm process.
5632 mlx5_flow_query_alarm(void *arg)
5634 struct mlx5_ibv_shared *sh = arg;
5635 struct mlx5_devx_obj *dcs;
5638 uint8_t batch = sh->cmng.batch;
5639 uint16_t pool_index = sh->cmng.pool_index;
5640 struct mlx5_pools_container *cont;
5641 struct mlx5_pools_container *mcont;
5642 struct mlx5_flow_counter_pool *pool;
5644 if (sh->cmng.pending_queries >= MLX5_MAX_PENDING_QUERIES)
5647 cont = MLX5_CNT_CONTAINER(sh, batch, 1);
5648 mcont = MLX5_CNT_CONTAINER(sh, batch, 0);
5649 /* Check if resize was done and need to flip a container. */
5650 if (cont != mcont) {
5652 /* Clean the old container. */
5653 rte_free(cont->pools);
5654 memset(cont, 0, sizeof(*cont));
5657 /* Flip the host container. */
5658 sh->cmng.mhi[batch] ^= (uint8_t)2;
5662 /* 2 empty containers case is unexpected. */
5663 if (unlikely(batch != sh->cmng.batch))
5667 goto next_container;
5669 pool = cont->pools[pool_index];
5671 /* There is a pool query in progress. */
5674 LIST_FIRST(&sh->cmng.free_stat_raws);
5676 /* No free counter statistics raw memory. */
5678 dcs = (struct mlx5_devx_obj *)(uintptr_t)rte_atomic64_read
5680 offset = batch ? 0 : dcs->id % MLX5_COUNTERS_PER_POOL;
5682 * Identify the counters released between query trigger and query
5683 * handle more effiecntly. The counter released in this gap period
5684 * should wait for a new round of query as the new arrived packets
5685 * will not be taken into account.
5687 rte_atomic64_add(&pool->start_query_gen, 1);
5688 ret = mlx5_devx_cmd_flow_counter_query(dcs, 0, MLX5_COUNTERS_PER_POOL -
5690 pool->raw_hw->mem_mng->dm->id,
5692 (pool->raw_hw->data + offset),
5694 (uint64_t)(uintptr_t)pool);
5696 rte_atomic64_sub(&pool->start_query_gen, 1);
5697 DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs ID"
5698 " %d", pool->min_dcs->id);
5699 pool->raw_hw = NULL;
5702 pool->raw_hw->min_dcs_id = dcs->id;
5703 LIST_REMOVE(pool->raw_hw, next);
5704 sh->cmng.pending_queries++;
5706 if (pool_index >= rte_atomic16_read(&cont->n_valid)) {
5711 sh->cmng.batch = batch;
5712 sh->cmng.pool_index = pool_index;
5713 mlx5_set_query_alarm(sh);
5717 * Handler for the HW respond about ready values from an asynchronous batch
5718 * query. This function is probably called by the host thread.
5721 * The pointer to the shared IB device context.
5722 * @param[in] async_id
5723 * The Devx async ID.
5725 * The status of the completion.
5728 mlx5_flow_async_pool_query_handle(struct mlx5_ibv_shared *sh,
5729 uint64_t async_id, int status)
5731 struct mlx5_flow_counter_pool *pool =
5732 (struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
5733 struct mlx5_counter_stats_raw *raw_to_free;
5735 if (unlikely(status)) {
5736 rte_atomic64_sub(&pool->start_query_gen, 1);
5737 raw_to_free = pool->raw_hw;
5739 raw_to_free = pool->raw;
5740 rte_spinlock_lock(&pool->sl);
5741 pool->raw = pool->raw_hw;
5742 rte_spinlock_unlock(&pool->sl);
5743 MLX5_ASSERT(rte_atomic64_read(&pool->end_query_gen) + 1 ==
5744 rte_atomic64_read(&pool->start_query_gen));
5745 rte_atomic64_set(&pool->end_query_gen,
5746 rte_atomic64_read(&pool->start_query_gen));
5747 /* Be sure the new raw counters data is updated in memory. */
5750 LIST_INSERT_HEAD(&sh->cmng.free_stat_raws, raw_to_free, next);
5751 pool->raw_hw = NULL;
5752 sh->cmng.pending_queries--;
5756 * Translate the rte_flow group index to HW table value.
5758 * @param[in] attributes
5759 * Pointer to flow attributes
5760 * @param[in] external
5761 * Value is part of flow rule created by request external to PMD.
5763 * rte_flow group index value.
5764 * @param[out] fdb_def_rule
5765 * Whether fdb jump to table 1 is configured.
5769 * Pointer to error structure.
5772 * 0 on success, a negative errno value otherwise and rte_errno is set.
5775 mlx5_flow_group_to_table(const struct rte_flow_attr *attributes, bool external,
5776 uint32_t group, bool fdb_def_rule, uint32_t *table,
5777 struct rte_flow_error *error)
5779 if (attributes->transfer && external && fdb_def_rule) {
5780 if (group == UINT32_MAX)
5781 return rte_flow_error_set
5783 RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
5785 "group index not supported");
5794 * Discover availability of metadata reg_c's.
5796 * Iteratively use test flows to check availability.
5799 * Pointer to the Ethernet device structure.
5802 * 0 on success, a negative errno value otherwise and rte_errno is set.
5805 mlx5_flow_discover_mreg_c(struct rte_eth_dev *dev)
5807 struct mlx5_priv *priv = dev->data->dev_private;
5808 struct mlx5_dev_config *config = &priv->config;
5809 enum modify_reg idx;
5812 /* reg_c[0] and reg_c[1] are reserved. */
5813 config->flow_mreg_c[n++] = REG_C_0;
5814 config->flow_mreg_c[n++] = REG_C_1;
5815 /* Discover availability of other reg_c's. */
5816 for (idx = REG_C_2; idx <= REG_C_7; ++idx) {
5817 struct rte_flow_attr attr = {
5818 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
5819 .priority = MLX5_FLOW_PRIO_RSVD,
5822 struct rte_flow_item items[] = {
5824 .type = RTE_FLOW_ITEM_TYPE_END,
5827 struct rte_flow_action actions[] = {
5829 .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
5830 .conf = &(struct mlx5_flow_action_copy_mreg){
5836 .type = RTE_FLOW_ACTION_TYPE_JUMP,
5837 .conf = &(struct rte_flow_action_jump){
5838 .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
5842 .type = RTE_FLOW_ACTION_TYPE_END,
5845 struct rte_flow *flow;
5846 struct rte_flow_error error;
5848 if (!config->dv_flow_en)
5850 /* Create internal flow, validation skips copy action. */
5851 flow = flow_list_create(dev, NULL, &attr, items,
5852 actions, false, &error);
5855 if (dev->data->dev_started || !flow_drv_apply(dev, flow, NULL))
5856 config->flow_mreg_c[n++] = idx;
5857 flow_list_destroy(dev, NULL, flow);
5859 for (; n < MLX5_MREG_C_NUM; ++n)
5860 config->flow_mreg_c[n] = REG_NONE;
5865 * Dump flow raw hw data to file
5868 * The pointer to Ethernet device.
5870 * A pointer to a file for output.
5872 * Perform verbose error reporting if not NULL. PMDs initialize this
5873 * structure in case of error only.
5875 * 0 on success, a nagative value otherwise.
5878 mlx5_flow_dev_dump(struct rte_eth_dev *dev,
5880 struct rte_flow_error *error __rte_unused)
5882 struct mlx5_priv *priv = dev->data->dev_private;
5883 struct mlx5_ibv_shared *sh = priv->sh;
5885 return mlx5_devx_cmd_flow_dump(sh->fdb_domain, sh->rx_domain,
5886 sh->tx_domain, file);