drivers/net/mlx5/mlx5_flow.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2016 6WIND S.A.
   3  * Copyright 2016 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stdalign.h>
   7 #include <stdint.h>
   8 #include <string.h>
   9 #include <stdbool.h>
  10 #include <sys/queue.h>
  11
  12 #include <rte_common.h>
  13 #include <rte_ether.h>
  14 #include <ethdev_driver.h>
  15 #include <rte_eal_paging.h>
  16 #include <rte_flow.h>
  17 #include <rte_cycles.h>
  18 #include <rte_flow_driver.h>
  19 #include <rte_malloc.h>
  20 #include <rte_ip.h>
  21
  22 #include <mlx5_glue.h>
  23 #include <mlx5_devx_cmds.h>
  24 #include <mlx5_prm.h>
  25 #include <mlx5_malloc.h>
  26
  27 #include "mlx5_defs.h"
  28 #include "mlx5.h"
  29 #include "mlx5_flow.h"
  30 #include "mlx5_flow_os.h"
  31 #include "mlx5_rx.h"
  32 #include "mlx5_tx.h"
  33 #include "mlx5_common_os.h"
  34 #include "rte_pmd_mlx5.h"
  35
  36 struct tunnel_default_miss_ctx {
  37         uint16_t *queue;
  38         __extension__
  39         union {
  40                 struct rte_flow_action_rss action_rss;
  41                 struct rte_flow_action_queue miss_queue;
  42                 struct rte_flow_action_jump miss_jump;
  43                 uint8_t raw[0];
  44         };
  45 };
  46
  47 static int
  48 flow_tunnel_add_default_miss(struct rte_eth_dev *dev,
  49                              struct rte_flow *flow,
  50                              const struct rte_flow_attr *attr,
  51                              const struct rte_flow_action *app_actions,
  52                              uint32_t flow_idx,
  53                              struct tunnel_default_miss_ctx *ctx,
  54                              struct rte_flow_error *error);
  55 static struct mlx5_flow_tunnel *
  56 mlx5_find_tunnel_id(struct rte_eth_dev *dev, uint32_t id);
  57 static void
  58 mlx5_flow_tunnel_free(struct rte_eth_dev *dev, struct mlx5_flow_tunnel *tunnel);
  59 static uint32_t
  60 tunnel_flow_group_to_flow_table(struct rte_eth_dev *dev,
  61                                 const struct mlx5_flow_tunnel *tunnel,
  62                                 uint32_t group, uint32_t *table,
  63                                 struct rte_flow_error *error);
  64
  65 static struct mlx5_flow_workspace *mlx5_flow_push_thread_workspace(void);
  66 static void mlx5_flow_pop_thread_workspace(void);
  67
  68
  69 /** Device flow drivers. */
  70 extern const struct mlx5_flow_driver_ops mlx5_flow_verbs_drv_ops;
  71
  72 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops;
  73
  74 const struct mlx5_flow_driver_ops *flow_drv_ops[] = {
  75         [MLX5_FLOW_TYPE_MIN] = &mlx5_flow_null_drv_ops,
  76 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
  77         [MLX5_FLOW_TYPE_DV] = &mlx5_flow_dv_drv_ops,
  78 #endif
  79         [MLX5_FLOW_TYPE_VERBS] = &mlx5_flow_verbs_drv_ops,
  80         [MLX5_FLOW_TYPE_MAX] = &mlx5_flow_null_drv_ops
  81 };
  82
  83 /** Helper macro to build input graph for mlx5_flow_expand_rss(). */
  84 #define MLX5_FLOW_EXPAND_RSS_NEXT(...) \
  85         (const int []){ \
  86                 __VA_ARGS__, 0, \
  87         }
  88
  89 /** Node object of input graph for mlx5_flow_expand_rss(). */
  90 struct mlx5_flow_expand_node {
  91         const int *const next;
  92         /**<
  93          * List of next node indexes. Index 0 is interpreted as a terminator.
  94          */
  95         const enum rte_flow_item_type type;
  96         /**< Pattern item type of current node. */
  97         uint64_t rss_types;
  98         /**<
  99          * RSS types bit-field associated with this node
 100          * (see ETH_RSS_* definitions).
 101          */
 102 };
 103
 104 /** Object returned by mlx5_flow_expand_rss(). */
 105 struct mlx5_flow_expand_rss {
 106         uint32_t entries;
 107         /**< Number of entries @p patterns and @p priorities. */
 108         struct {
 109                 struct rte_flow_item *pattern; /**< Expanded pattern array. */
 110                 uint32_t priority; /**< Priority offset for each expansion. */
 111         } entry[];
 112 };
 113
 114 static enum rte_flow_item_type
 115 mlx5_flow_expand_rss_item_complete(const struct rte_flow_item *item)
 116 {
 117         enum rte_flow_item_type ret = RTE_FLOW_ITEM_TYPE_VOID;
 118         uint16_t ether_type = 0;
 119         uint16_t ether_type_m;
 120         uint8_t ip_next_proto = 0;
 121         uint8_t ip_next_proto_m;
 122
 123         if (item == NULL || item->spec == NULL)
 124                 return ret;
 125         switch (item->type) {
 126         case RTE_FLOW_ITEM_TYPE_ETH:
 127                 if (item->mask)
 128                         ether_type_m = ((const struct rte_flow_item_eth *)
 129                                                 (item->mask))->type;
 130                 else
 131                         ether_type_m = rte_flow_item_eth_mask.type;
 132                 if (ether_type_m != RTE_BE16(0xFFFF))
 133                         break;
 134                 ether_type = ((const struct rte_flow_item_eth *)
 135                                 (item->spec))->type;
 136                 if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV4)
 137                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 138                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV6)
 139                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 140                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_VLAN)
 141                         ret = RTE_FLOW_ITEM_TYPE_VLAN;
 142                 else
 143                         ret = RTE_FLOW_ITEM_TYPE_END;
 144                 break;
 145         case RTE_FLOW_ITEM_TYPE_VLAN:
 146                 if (item->mask)
 147                         ether_type_m = ((const struct rte_flow_item_vlan *)
 148                                                 (item->mask))->inner_type;
 149                 else
 150                         ether_type_m = rte_flow_item_vlan_mask.inner_type;
 151                 if (ether_type_m != RTE_BE16(0xFFFF))
 152                         break;
 153                 ether_type = ((const struct rte_flow_item_vlan *)
 154                                 (item->spec))->inner_type;
 155                 if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV4)
 156                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 157                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_IPV6)
 158                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 159                 else if (rte_be_to_cpu_16(ether_type) == RTE_ETHER_TYPE_VLAN)
 160                         ret = RTE_FLOW_ITEM_TYPE_VLAN;
 161                 else
 162                         ret = RTE_FLOW_ITEM_TYPE_END;
 163                 break;
 164         case RTE_FLOW_ITEM_TYPE_IPV4:
 165                 if (item->mask)
 166                         ip_next_proto_m = ((const struct rte_flow_item_ipv4 *)
 167                                         (item->mask))->hdr.next_proto_id;
 168                 else
 169                         ip_next_proto_m =
 170                                 rte_flow_item_ipv4_mask.hdr.next_proto_id;
 171                 if (ip_next_proto_m != 0xFF)
 172                         break;
 173                 ip_next_proto = ((const struct rte_flow_item_ipv4 *)
 174                                 (item->spec))->hdr.next_proto_id;
 175                 if (ip_next_proto == IPPROTO_UDP)
 176                         ret = RTE_FLOW_ITEM_TYPE_UDP;
 177                 else if (ip_next_proto == IPPROTO_TCP)
 178                         ret = RTE_FLOW_ITEM_TYPE_TCP;
 179                 else if (ip_next_proto == IPPROTO_IP)
 180                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 181                 else if (ip_next_proto == IPPROTO_IPV6)
 182                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 183                 else
 184                         ret = RTE_FLOW_ITEM_TYPE_END;
 185                 break;
 186         case RTE_FLOW_ITEM_TYPE_IPV6:
 187                 if (item->mask)
 188                         ip_next_proto_m = ((const struct rte_flow_item_ipv6 *)
 189                                                 (item->mask))->hdr.proto;
 190                 else
 191                         ip_next_proto_m =
 192                                 rte_flow_item_ipv6_mask.hdr.proto;
 193                 if (ip_next_proto_m != 0xFF)
 194                         break;
 195                 ip_next_proto = ((const struct rte_flow_item_ipv6 *)
 196                                 (item->spec))->hdr.proto;
 197                 if (ip_next_proto == IPPROTO_UDP)
 198                         ret = RTE_FLOW_ITEM_TYPE_UDP;
 199                 else if (ip_next_proto == IPPROTO_TCP)
 200                         ret = RTE_FLOW_ITEM_TYPE_TCP;
 201                 else if (ip_next_proto == IPPROTO_IP)
 202                         ret = RTE_FLOW_ITEM_TYPE_IPV4;
 203                 else if (ip_next_proto == IPPROTO_IPV6)
 204                         ret = RTE_FLOW_ITEM_TYPE_IPV6;
 205                 else
 206                         ret = RTE_FLOW_ITEM_TYPE_END;
 207                 break;
 208         default:
 209                 ret = RTE_FLOW_ITEM_TYPE_VOID;
 210                 break;
 211         }
 212         return ret;
 213 }
 214
 215 #define MLX5_RSS_EXP_ELT_N 8
 216
 217 /**
 218  * Expand RSS flows into several possible flows according to the RSS hash
 219  * fields requested and the driver capabilities.
 220  *
 221  * @param[out] buf
 222  *   Buffer to store the result expansion.
 223  * @param[in] size
 224  *   Buffer size in bytes. If 0, @p buf can be NULL.
 225  * @param[in] pattern
 226  *   User flow pattern.
 227  * @param[in] types
 228  *   RSS types to expand (see ETH_RSS_* definitions).
 229  * @param[in] graph
 230  *   Input graph to expand @p pattern according to @p types.
 231  * @param[in] graph_root_index
 232  *   Index of root node in @p graph, typically 0.
 233  *
 234  * @return
 235  *   A positive value representing the size of @p buf in bytes regardless of
 236  *   @p size on success, a negative errno value otherwise and rte_errno is
 237  *   set, the following errors are defined:
 238  *
 239  *   -E2BIG: graph-depth @p graph is too deep.
 240  */
 241 static int
 242 mlx5_flow_expand_rss(struct mlx5_flow_expand_rss *buf, size_t size,
 243                      const struct rte_flow_item *pattern, uint64_t types,
 244                      const struct mlx5_flow_expand_node graph[],
 245                      int graph_root_index)
 246 {
 247         const struct rte_flow_item *item;
 248         const struct mlx5_flow_expand_node *node = &graph[graph_root_index];
 249         const int *next_node;
 250         const int *stack[MLX5_RSS_EXP_ELT_N];
 251         int stack_pos = 0;
 252         struct rte_flow_item flow_items[MLX5_RSS_EXP_ELT_N];
 253         unsigned int i;
 254         size_t lsize;
 255         size_t user_pattern_size = 0;
 256         void *addr = NULL;
 257         const struct mlx5_flow_expand_node *next = NULL;
 258         struct rte_flow_item missed_item;
 259         int missed = 0;
 260         int elt = 0;
 261         const struct rte_flow_item *last_item = NULL;
 262
 263         memset(&missed_item, 0, sizeof(missed_item));
 264         lsize = offsetof(struct mlx5_flow_expand_rss, entry) +
 265                 MLX5_RSS_EXP_ELT_N * sizeof(buf->entry[0]);
 266         if (lsize <= size) {
 267                 buf->entry[0].priority = 0;
 268                 buf->entry[0].pattern = (void *)&buf->entry[MLX5_RSS_EXP_ELT_N];
 269                 buf->entries = 0;
 270                 addr = buf->entry[0].pattern;
 271         }
 272         for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
 273                 if (item->type != RTE_FLOW_ITEM_TYPE_VOID)
 274                         last_item = item;
 275                 for (i = 0; node->next && node->next[i]; ++i) {
 276                         next = &graph[node->next[i]];
 277                         if (next->type == item->type)
 278                                 break;
 279                 }
 280                 if (next)
 281                         node = next;
 282                 user_pattern_size += sizeof(*item);
 283         }
 284         user_pattern_size += sizeof(*item); /* Handle END item. */
 285         lsize += user_pattern_size;
 286         /* Copy the user pattern in the first entry of the buffer. */
 287         if (lsize <= size) {
 288                 rte_memcpy(addr, pattern, user_pattern_size);
 289                 addr = (void *)(((uintptr_t)addr) + user_pattern_size);
 290                 buf->entries = 1;
 291         }
 292         /* Start expanding. */
 293         memset(flow_items, 0, sizeof(flow_items));
 294         user_pattern_size -= sizeof(*item);
 295         /*
 296          * Check if the last valid item has spec set, need complete pattern,
 297          * and the pattern can be used for expansion.
 298          */
 299         missed_item.type = mlx5_flow_expand_rss_item_complete(last_item);
 300         if (missed_item.type == RTE_FLOW_ITEM_TYPE_END) {
 301                 /* Item type END indicates expansion is not required. */
 302                 return lsize;
 303         }
 304         if (missed_item.type != RTE_FLOW_ITEM_TYPE_VOID) {
 305                 next = NULL;
 306                 missed = 1;
 307                 for (i = 0; node->next && node->next[i]; ++i) {
 308                         next = &graph[node->next[i]];
 309                         if (next->type == missed_item.type) {
 310                                 flow_items[0].type = missed_item.type;
 311                                 flow_items[1].type = RTE_FLOW_ITEM_TYPE_END;
 312                                 break;
 313                         }
 314                         next = NULL;
 315                 }
 316         }
 317         if (next && missed) {
 318                 elt = 2; /* missed item + item end. */
 319                 node = next;
 320                 lsize += elt * sizeof(*item) + user_pattern_size;
 321                 if ((node->rss_types & types) && lsize <= size) {
 322                         buf->entry[buf->entries].priority = 1;
 323                         buf->entry[buf->entries].pattern = addr;
 324                         buf->entries++;
 325                         rte_memcpy(addr, buf->entry[0].pattern,
 326                                    user_pattern_size);
 327                         addr = (void *)(((uintptr_t)addr) + user_pattern_size);
 328                         rte_memcpy(addr, flow_items, elt * sizeof(*item));
 329                         addr = (void *)(((uintptr_t)addr) +
 330                                         elt * sizeof(*item));
 331                 }
 332         }
 333         memset(flow_items, 0, sizeof(flow_items));
 334         next_node = node->next;
 335         stack[stack_pos] = next_node;
 336         node = next_node ? &graph[*next_node] : NULL;
 337         while (node) {
 338                 flow_items[stack_pos].type = node->type;
 339                 if (node->rss_types & types) {
 340                         /*
 341                          * compute the number of items to copy from the
 342                          * expansion and copy it.
 343                          * When the stack_pos is 0, there are 1 element in it,
 344                          * plus the addition END item.
 345                          */
 346                         elt = stack_pos + 2;
 347                         flow_items[stack_pos + 1].type = RTE_FLOW_ITEM_TYPE_END;
 348                         lsize += elt * sizeof(*item) + user_pattern_size;
 349                         if (lsize <= size) {
 350                                 size_t n = elt * sizeof(*item);
 351
 352                                 buf->entry[buf->entries].priority =
 353                                         stack_pos + 1 + missed;
 354                                 buf->entry[buf->entries].pattern = addr;
 355                                 buf->entries++;
 356                                 rte_memcpy(addr, buf->entry[0].pattern,
 357                                            user_pattern_size);
 358                                 addr = (void *)(((uintptr_t)addr) +
 359                                                 user_pattern_size);
 360                                 rte_memcpy(addr, &missed_item,
 361                                            missed * sizeof(*item));
 362                                 addr = (void *)(((uintptr_t)addr) +
 363                                         missed * sizeof(*item));
 364                                 rte_memcpy(addr, flow_items, n);
 365                                 addr = (void *)(((uintptr_t)addr) + n);
 366                         }
 367                 }
 368                 /* Go deeper. */
 369                 if (node->next) {
 370                         next_node = node->next;
 371                         if (stack_pos++ == MLX5_RSS_EXP_ELT_N) {
 372                                 rte_errno = E2BIG;
 373                                 return -rte_errno;
 374                         }
 375                         stack[stack_pos] = next_node;
 376                 } else if (*(next_node + 1)) {
 377                         /* Follow up with the next possibility. */
 378                         ++next_node;
 379                 } else {
 380                         /* Move to the next path. */
 381                         if (stack_pos)
 382                                 next_node = stack[--stack_pos];
 383                         next_node++;
 384                         stack[stack_pos] = next_node;
 385                 }
 386                 node = *next_node ? &graph[*next_node] : NULL;
 387         };
 388         return lsize;
 389 }
 390
 391 enum mlx5_expansion {
 392         MLX5_EXPANSION_ROOT,
 393         MLX5_EXPANSION_ROOT_OUTER,
 394         MLX5_EXPANSION_ROOT_ETH_VLAN,
 395         MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN,
 396         MLX5_EXPANSION_OUTER_ETH,
 397         MLX5_EXPANSION_OUTER_ETH_VLAN,
 398         MLX5_EXPANSION_OUTER_VLAN,
 399         MLX5_EXPANSION_OUTER_IPV4,
 400         MLX5_EXPANSION_OUTER_IPV4_UDP,
 401         MLX5_EXPANSION_OUTER_IPV4_TCP,
 402         MLX5_EXPANSION_OUTER_IPV6,
 403         MLX5_EXPANSION_OUTER_IPV6_UDP,
 404         MLX5_EXPANSION_OUTER_IPV6_TCP,
 405         MLX5_EXPANSION_VXLAN,
 406         MLX5_EXPANSION_VXLAN_GPE,
 407         MLX5_EXPANSION_GRE,
 408         MLX5_EXPANSION_MPLS,
 409         MLX5_EXPANSION_ETH,
 410         MLX5_EXPANSION_ETH_VLAN,
 411         MLX5_EXPANSION_VLAN,
 412         MLX5_EXPANSION_IPV4,
 413         MLX5_EXPANSION_IPV4_UDP,
 414         MLX5_EXPANSION_IPV4_TCP,
 415         MLX5_EXPANSION_IPV6,
 416         MLX5_EXPANSION_IPV6_UDP,
 417         MLX5_EXPANSION_IPV6_TCP,
 418 };
 419
 420 /** Supported expansion of items. */
 421 static const struct mlx5_flow_expand_node mlx5_support_expansion[] = {
 422         [MLX5_EXPANSION_ROOT] = {
 423                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 424                                                   MLX5_EXPANSION_IPV4,
 425                                                   MLX5_EXPANSION_IPV6),
 426                 .type = RTE_FLOW_ITEM_TYPE_END,
 427         },
 428         [MLX5_EXPANSION_ROOT_OUTER] = {
 429                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH,
 430                                                   MLX5_EXPANSION_OUTER_IPV4,
 431                                                   MLX5_EXPANSION_OUTER_IPV6),
 432                 .type = RTE_FLOW_ITEM_TYPE_END,
 433         },
 434         [MLX5_EXPANSION_ROOT_ETH_VLAN] = {
 435                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH_VLAN),
 436                 .type = RTE_FLOW_ITEM_TYPE_END,
 437         },
 438         [MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN] = {
 439                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 440                                                 (MLX5_EXPANSION_OUTER_ETH_VLAN),
 441                 .type = RTE_FLOW_ITEM_TYPE_END,
 442         },
 443         [MLX5_EXPANSION_OUTER_ETH] = {
 444                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
 445                                                   MLX5_EXPANSION_OUTER_IPV6,
 446                                                   MLX5_EXPANSION_MPLS),
 447                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 448                 .rss_types = 0,
 449         },
 450         [MLX5_EXPANSION_OUTER_ETH_VLAN] = {
 451                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_VLAN),
 452                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 453                 .rss_types = 0,
 454         },
 455         [MLX5_EXPANSION_OUTER_VLAN] = {
 456                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
 457                                                   MLX5_EXPANSION_OUTER_IPV6),
 458                 .type = RTE_FLOW_ITEM_TYPE_VLAN,
 459         },
 460         [MLX5_EXPANSION_OUTER_IPV4] = {
 461                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 462                         (MLX5_EXPANSION_OUTER_IPV4_UDP,
 463                          MLX5_EXPANSION_OUTER_IPV4_TCP,
 464                          MLX5_EXPANSION_GRE,
 465                          MLX5_EXPANSION_IPV4,
 466                          MLX5_EXPANSION_IPV6),
 467                 .type = RTE_FLOW_ITEM_TYPE_IPV4,
 468                 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
 469                         ETH_RSS_NONFRAG_IPV4_OTHER,
 470         },
 471         [MLX5_EXPANSION_OUTER_IPV4_UDP] = {
 472                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
 473                                                   MLX5_EXPANSION_VXLAN_GPE),
 474                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 475                 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
 476         },
 477         [MLX5_EXPANSION_OUTER_IPV4_TCP] = {
 478                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 479                 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
 480         },
 481         [MLX5_EXPANSION_OUTER_IPV6] = {
 482                 .next = MLX5_FLOW_EXPAND_RSS_NEXT
 483                         (MLX5_EXPANSION_OUTER_IPV6_UDP,
 484                          MLX5_EXPANSION_OUTER_IPV6_TCP,
 485                          MLX5_EXPANSION_IPV4,
 486                          MLX5_EXPANSION_IPV6,
 487                          MLX5_EXPANSION_GRE),
 488                 .type = RTE_FLOW_ITEM_TYPE_IPV6,
 489                 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
 490                         ETH_RSS_NONFRAG_IPV6_OTHER,
 491         },
 492         [MLX5_EXPANSION_OUTER_IPV6_UDP] = {
 493                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
 494                                                   MLX5_EXPANSION_VXLAN_GPE),
 495                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 496                 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
 497         },
 498         [MLX5_EXPANSION_OUTER_IPV6_TCP] = {
 499                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 500                 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
 501         },
 502         [MLX5_EXPANSION_VXLAN] = {
 503                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 504                                                   MLX5_EXPANSION_IPV4,
 505                                                   MLX5_EXPANSION_IPV6),
 506                 .type = RTE_FLOW_ITEM_TYPE_VXLAN,
 507         },
 508         [MLX5_EXPANSION_VXLAN_GPE] = {
 509                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
 510                                                   MLX5_EXPANSION_IPV4,
 511                                                   MLX5_EXPANSION_IPV6),
 512                 .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
 513         },
 514         [MLX5_EXPANSION_GRE] = {
 515                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 516                                                   MLX5_EXPANSION_IPV6),
 517                 .type = RTE_FLOW_ITEM_TYPE_GRE,
 518         },
 519         [MLX5_EXPANSION_MPLS] = {
 520                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 521                                                   MLX5_EXPANSION_IPV6),
 522                 .type = RTE_FLOW_ITEM_TYPE_MPLS,
 523         },
 524         [MLX5_EXPANSION_ETH] = {
 525                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 526                                                   MLX5_EXPANSION_IPV6),
 527                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 528         },
 529         [MLX5_EXPANSION_ETH_VLAN] = {
 530                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VLAN),
 531                 .type = RTE_FLOW_ITEM_TYPE_ETH,
 532         },
 533         [MLX5_EXPANSION_VLAN] = {
 534                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 535                                                   MLX5_EXPANSION_IPV6),
 536                 .type = RTE_FLOW_ITEM_TYPE_VLAN,
 537         },
 538         [MLX5_EXPANSION_IPV4] = {
 539                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4_UDP,
 540                                                   MLX5_EXPANSION_IPV4_TCP),
 541                 .type = RTE_FLOW_ITEM_TYPE_IPV4,
 542                 .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
 543                         ETH_RSS_NONFRAG_IPV4_OTHER,
 544         },
 545         [MLX5_EXPANSION_IPV4_UDP] = {
 546                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 547                 .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
 548         },
 549         [MLX5_EXPANSION_IPV4_TCP] = {
 550                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 551                 .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
 552         },
 553         [MLX5_EXPANSION_IPV6] = {
 554                 .next = MLX5_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV6_UDP,
 555                                                   MLX5_EXPANSION_IPV6_TCP),
 556                 .type = RTE_FLOW_ITEM_TYPE_IPV6,
 557                 .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
 558                         ETH_RSS_NONFRAG_IPV6_OTHER,
 559         },
 560         [MLX5_EXPANSION_IPV6_UDP] = {
 561                 .type = RTE_FLOW_ITEM_TYPE_UDP,
 562                 .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
 563         },
 564         [MLX5_EXPANSION_IPV6_TCP] = {
 565                 .type = RTE_FLOW_ITEM_TYPE_TCP,
 566                 .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
 567         },
 568 };
 569
 570 static struct rte_flow_action_handle *
 571 mlx5_action_handle_create(struct rte_eth_dev *dev,
 572                           const struct rte_flow_indir_action_conf *conf,
 573                           const struct rte_flow_action *action,
 574                           struct rte_flow_error *error);
 575 static int mlx5_action_handle_destroy
 576                                 (struct rte_eth_dev *dev,
 577                                  struct rte_flow_action_handle *handle,
 578                                  struct rte_flow_error *error);
 579 static int mlx5_action_handle_update
 580                                 (struct rte_eth_dev *dev,
 581                                  struct rte_flow_action_handle *handle,
 582                                  const void *update,
 583                                  struct rte_flow_error *error);
 584 static int mlx5_action_handle_query
 585                                 (struct rte_eth_dev *dev,
 586                                  const struct rte_flow_action_handle *handle,
 587                                  void *data,
 588                                  struct rte_flow_error *error);
 589 static int
 590 mlx5_flow_tunnel_decap_set(struct rte_eth_dev *dev,
 591                     struct rte_flow_tunnel *app_tunnel,
 592                     struct rte_flow_action **actions,
 593                     uint32_t *num_of_actions,
 594                     struct rte_flow_error *error);
 595 static int
 596 mlx5_flow_tunnel_match(struct rte_eth_dev *dev,
 597                        struct rte_flow_tunnel *app_tunnel,
 598                        struct rte_flow_item **items,
 599                        uint32_t *num_of_items,
 600                        struct rte_flow_error *error);
 601 static int
 602 mlx5_flow_tunnel_item_release(struct rte_eth_dev *dev,
 603                               struct rte_flow_item *pmd_items,
 604                               uint32_t num_items, struct rte_flow_error *err);
 605 static int
 606 mlx5_flow_tunnel_action_release(struct rte_eth_dev *dev,
 607                                 struct rte_flow_action *pmd_actions,
 608                                 uint32_t num_actions,
 609                                 struct rte_flow_error *err);
 610 static int
 611 mlx5_flow_tunnel_get_restore_info(struct rte_eth_dev *dev,
 612                                   struct rte_mbuf *m,
 613                                   struct rte_flow_restore_info *info,
 614                                   struct rte_flow_error *err);
 615
 616 static const struct rte_flow_ops mlx5_flow_ops = {
 617         .validate = mlx5_flow_validate,
 618         .create = mlx5_flow_create,
 619         .destroy = mlx5_flow_destroy,
 620         .flush = mlx5_flow_flush,
 621         .isolate = mlx5_flow_isolate,
 622         .query = mlx5_flow_query,
 623         .dev_dump = mlx5_flow_dev_dump,
 624         .get_aged_flows = mlx5_flow_get_aged_flows,
 625         .action_handle_create = mlx5_action_handle_create,
 626         .action_handle_destroy = mlx5_action_handle_destroy,
 627         .action_handle_update = mlx5_action_handle_update,
 628         .action_handle_query = mlx5_action_handle_query,
 629         .tunnel_decap_set = mlx5_flow_tunnel_decap_set,
 630         .tunnel_match = mlx5_flow_tunnel_match,
 631         .tunnel_action_decap_release = mlx5_flow_tunnel_action_release,
 632         .tunnel_item_release = mlx5_flow_tunnel_item_release,
 633         .get_restore_info = mlx5_flow_tunnel_get_restore_info,
 634 };
 635
 636 /* Tunnel information. */
 637 struct mlx5_flow_tunnel_info {
 638         uint64_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
 639         uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
 640 };
 641
 642 static struct mlx5_flow_tunnel_info tunnels_info[] = {
 643         {
 644                 .tunnel = MLX5_FLOW_LAYER_VXLAN,
 645                 .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
 646         },
 647         {
 648                 .tunnel = MLX5_FLOW_LAYER_GENEVE,
 649                 .ptype = RTE_PTYPE_TUNNEL_GENEVE | RTE_PTYPE_L4_UDP,
 650         },
 651         {
 652                 .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
 653                 .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
 654         },
 655         {
 656                 .tunnel = MLX5_FLOW_LAYER_GRE,
 657                 .ptype = RTE_PTYPE_TUNNEL_GRE,
 658         },
 659         {
 660                 .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
 661                 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_UDP | RTE_PTYPE_L4_UDP,
 662         },
 663         {
 664                 .tunnel = MLX5_FLOW_LAYER_MPLS,
 665                 .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
 666         },
 667         {
 668                 .tunnel = MLX5_FLOW_LAYER_NVGRE,
 669                 .ptype = RTE_PTYPE_TUNNEL_NVGRE,
 670         },
 671         {
 672                 .tunnel = MLX5_FLOW_LAYER_IPIP,
 673                 .ptype = RTE_PTYPE_TUNNEL_IP,
 674         },
 675         {
 676                 .tunnel = MLX5_FLOW_LAYER_IPV6_ENCAP,
 677                 .ptype = RTE_PTYPE_TUNNEL_IP,
 678         },
 679         {
 680                 .tunnel = MLX5_FLOW_LAYER_GTP,
 681                 .ptype = RTE_PTYPE_TUNNEL_GTPU,
 682         },
 683 };
 684
 685
 686
 687 /**
 688  * Translate tag ID to register.
 689  *
 690  * @param[in] dev
 691  *   Pointer to the Ethernet device structure.
 692  * @param[in] feature
 693  *   The feature that request the register.
 694  * @param[in] id
 695  *   The request register ID.
 696  * @param[out] error
 697  *   Error description in case of any.
 698  *
 699  * @return
 700  *   The request register on success, a negative errno
 701  *   value otherwise and rte_errno is set.
 702  */
 703 int
 704 mlx5_flow_get_reg_id(struct rte_eth_dev *dev,
 705                      enum mlx5_feature_name feature,
 706                      uint32_t id,
 707                      struct rte_flow_error *error)
 708 {
 709         struct mlx5_priv *priv = dev->data->dev_private;
 710         struct mlx5_dev_config *config = &priv->config;
 711         enum modify_reg start_reg;
 712         bool skip_mtr_reg = false;
 713
 714         switch (feature) {
 715         case MLX5_HAIRPIN_RX:
 716                 return REG_B;
 717         case MLX5_HAIRPIN_TX:
 718                 return REG_A;
 719         case MLX5_METADATA_RX:
 720                 switch (config->dv_xmeta_en) {
 721                 case MLX5_XMETA_MODE_LEGACY:
 722                         return REG_B;
 723                 case MLX5_XMETA_MODE_META16:
 724                         return REG_C_0;
 725                 case MLX5_XMETA_MODE_META32:
 726                         return REG_C_1;
 727                 }
 728                 break;
 729         case MLX5_METADATA_TX:
 730                 return REG_A;
 731         case MLX5_METADATA_FDB:
 732                 switch (config->dv_xmeta_en) {
 733                 case MLX5_XMETA_MODE_LEGACY:
 734                         return REG_NON;
 735                 case MLX5_XMETA_MODE_META16:
 736                         return REG_C_0;
 737                 case MLX5_XMETA_MODE_META32:
 738                         return REG_C_1;
 739                 }
 740                 break;
 741         case MLX5_FLOW_MARK:
 742                 switch (config->dv_xmeta_en) {
 743                 case MLX5_XMETA_MODE_LEGACY:
 744                         return REG_NON;
 745                 case MLX5_XMETA_MODE_META16:
 746                         return REG_C_1;
 747                 case MLX5_XMETA_MODE_META32:
 748                         return REG_C_0;
 749                 }
 750                 break;
 751         case MLX5_MTR_SFX:
 752                 /*
 753                  * If meter color and flow match share one register, flow match
 754                  * should use the meter color register for match.
 755                  */
 756                 if (priv->mtr_reg_share)
 757                         return priv->mtr_color_reg;
 758                 else
 759                         return priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
 760                                REG_C_3;
 761         case MLX5_MTR_COLOR:
 762         case MLX5_ASO_FLOW_HIT: /* Both features use the same REG_C. */
 763                 MLX5_ASSERT(priv->mtr_color_reg != REG_NON);
 764                 return priv->mtr_color_reg;
 765         case MLX5_COPY_MARK:
 766                 /*
 767                  * Metadata COPY_MARK register using is in meter suffix sub
 768                  * flow while with meter. It's safe to share the same register.
 769                  */
 770                 return priv->mtr_color_reg != REG_C_2 ? REG_C_2 : REG_C_3;
 771         case MLX5_APP_TAG:
 772                 /*
 773                  * If meter is enable, it will engage the register for color
 774                  * match and flow match. If meter color match is not using the
 775                  * REG_C_2, need to skip the REG_C_x be used by meter color
 776                  * match.
 777                  * If meter is disable, free to use all available registers.
 778                  */
 779                 start_reg = priv->mtr_color_reg != REG_C_2 ? REG_C_2 :
 780                             (priv->mtr_reg_share ? REG_C_3 : REG_C_4);
 781                 skip_mtr_reg = !!(priv->mtr_en && start_reg == REG_C_2);
 782                 if (id > (uint32_t)(REG_C_7 - start_reg))
 783                         return rte_flow_error_set(error, EINVAL,
 784                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 785                                                   NULL, "invalid tag id");
 786                 if (config->flow_mreg_c[id + start_reg - REG_C_0] == REG_NON)
 787                         return rte_flow_error_set(error, ENOTSUP,
 788                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 789                                                   NULL, "unsupported tag id");
 790                 /*
 791                  * This case means meter is using the REG_C_x great than 2.
 792                  * Take care not to conflict with meter color REG_C_x.
 793                  * If the available index REG_C_y >= REG_C_x, skip the
 794                  * color register.
 795                  */
 796                 if (skip_mtr_reg && config->flow_mreg_c
 797                     [id + start_reg - REG_C_0] >= priv->mtr_color_reg) {
 798                         if (id >= (uint32_t)(REG_C_7 - start_reg))
 799                                 return rte_flow_error_set(error, EINVAL,
 800                                                        RTE_FLOW_ERROR_TYPE_ITEM,
 801                                                         NULL, "invalid tag id");
 802                         if (config->flow_mreg_c
 803                             [id + 1 + start_reg - REG_C_0] != REG_NON)
 804                                 return config->flow_mreg_c
 805                                                [id + 1 + start_reg - REG_C_0];
 806                         return rte_flow_error_set(error, ENOTSUP,
 807                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 808                                                   NULL, "unsupported tag id");
 809                 }
 810                 return config->flow_mreg_c[id + start_reg - REG_C_0];
 811         }
 812         MLX5_ASSERT(false);
 813         return rte_flow_error_set(error, EINVAL,
 814                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
 815                                   NULL, "invalid feature name");
 816 }
 817
 818 /**
 819  * Check extensive flow metadata register support.
 820  *
 821  * @param dev
 822  *   Pointer to rte_eth_dev structure.
 823  *
 824  * @return
 825  *   True if device supports extensive flow metadata register, otherwise false.
 826  */
 827 bool
 828 mlx5_flow_ext_mreg_supported(struct rte_eth_dev *dev)
 829 {
 830         struct mlx5_priv *priv = dev->data->dev_private;
 831         struct mlx5_dev_config *config = &priv->config;
 832
 833         /*
 834          * Having available reg_c can be regarded inclusively as supporting
 835          * extensive flow metadata register, which could mean,
 836          * - metadata register copy action by modify header.
 837          * - 16 modify header actions is supported.
 838          * - reg_c's are preserved across different domain (FDB and NIC) on
 839          *   packet loopback by flow lookup miss.
 840          */
 841         return config->flow_mreg_c[2] != REG_NON;
 842 }
 843
 844 /**
 845  * Get the lowest priority.
 846  *
 847  * @param[in] dev
 848  *   Pointer to the Ethernet device structure.
 849  * @param[in] attributes
 850  *   Pointer to device flow rule attributes.
 851  *
 852  * @return
 853  *   The value of lowest priority of flow.
 854  */
 855 uint32_t
 856 mlx5_get_lowest_priority(struct rte_eth_dev *dev,
 857                           const struct rte_flow_attr *attr)
 858 {
 859         struct mlx5_priv *priv = dev->data->dev_private;
 860
 861         if (!attr->group && !attr->transfer)
 862                 return priv->config.flow_prio - 2;
 863         return MLX5_NON_ROOT_FLOW_MAX_PRIO - 1;
 864 }
 865
 866 /**
 867  * Calculate matcher priority of the flow.
 868  *
 869  * @param[in] dev
 870  *   Pointer to the Ethernet device structure.
 871  * @param[in] attr
 872  *   Pointer to device flow rule attributes.
 873  * @param[in] subpriority
 874  *   The priority based on the items.
 875  * @return
 876  *   The matcher priority of the flow.
 877  */
 878 uint16_t
 879 mlx5_get_matcher_priority(struct rte_eth_dev *dev,
 880                           const struct rte_flow_attr *attr,
 881                           uint32_t subpriority)
 882 {
 883         uint16_t priority = (uint16_t)attr->priority;
 884         struct mlx5_priv *priv = dev->data->dev_private;
 885
 886         if (!attr->group && !attr->transfer) {
 887                 if (attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)
 888                         priority = priv->config.flow_prio - 1;
 889                 return mlx5_os_flow_adjust_priority(dev, priority, subpriority);
 890         }
 891         if (attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)
 892                 priority = MLX5_NON_ROOT_FLOW_MAX_PRIO;
 893         return priority * 3 + subpriority;
 894 }
 895
 896 /**
 897  * Verify the @p item specifications (spec, last, mask) are compatible with the
 898  * NIC capabilities.
 899  *
 900  * @param[in] item
 901  *   Item specification.
 902  * @param[in] mask
 903  *   @p item->mask or flow default bit-masks.
 904  * @param[in] nic_mask
 905  *   Bit-masks covering supported fields by the NIC to compare with user mask.
 906  * @param[in] size
 907  *   Bit-masks size in bytes.
 908  * @param[in] range_accepted
 909  *   True if range of values is accepted for specific fields, false otherwise.
 910  * @param[out] error
 911  *   Pointer to error structure.
 912  *
 913  * @return
 914  *   0 on success, a negative errno value otherwise and rte_errno is set.
 915  */
 916 int
 917 mlx5_flow_item_acceptable(const struct rte_flow_item *item,
 918                           const uint8_t *mask,
 919                           const uint8_t *nic_mask,
 920                           unsigned int size,
 921                           bool range_accepted,
 922                           struct rte_flow_error *error)
 923 {
 924         unsigned int i;
 925
 926         MLX5_ASSERT(nic_mask);
 927         for (i = 0; i < size; ++i)
 928                 if ((nic_mask[i] | mask[i]) != nic_mask[i])
 929                         return rte_flow_error_set(error, ENOTSUP,
 930                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 931                                                   item,
 932                                                   "mask enables non supported"
 933                                                   " bits");
 934         if (!item->spec && (item->mask || item->last))
 935                 return rte_flow_error_set(error, EINVAL,
 936                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
 937                                           "mask/last without a spec is not"
 938                                           " supported");
 939         if (item->spec && item->last && !range_accepted) {
 940                 uint8_t spec[size];
 941                 uint8_t last[size];
 942                 unsigned int i;
 943                 int ret;
 944
 945                 for (i = 0; i < size; ++i) {
 946                         spec[i] = ((const uint8_t *)item->spec)[i] & mask[i];
 947                         last[i] = ((const uint8_t *)item->last)[i] & mask[i];
 948                 }
 949                 ret = memcmp(spec, last, size);
 950                 if (ret != 0)
 951                         return rte_flow_error_set(error, EINVAL,
 952                                                   RTE_FLOW_ERROR_TYPE_ITEM,
 953                                                   item,
 954                                                   "range is not valid");
 955         }
 956         return 0;
 957 }
 958
 959 /**
 960  * Adjust the hash fields according to the @p flow information.
 961  *
 962  * @param[in] dev_flow.
 963  *   Pointer to the mlx5_flow.
 964  * @param[in] tunnel
 965  *   1 when the hash field is for a tunnel item.
 966  * @param[in] layer_types
 967  *   ETH_RSS_* types.
 968  * @param[in] hash_fields
 969  *   Item hash fields.
 970  *
 971  * @return
 972  *   The hash fields that should be used.
 973  */
 974 uint64_t
 975 mlx5_flow_hashfields_adjust(struct mlx5_flow_rss_desc *rss_desc,
 976                             int tunnel __rte_unused, uint64_t layer_types,
 977                             uint64_t hash_fields)
 978 {
 979 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 980         int rss_request_inner = rss_desc->level >= 2;
 981
 982         /* Check RSS hash level for tunnel. */
 983         if (tunnel && rss_request_inner)
 984                 hash_fields |= IBV_RX_HASH_INNER;
 985         else if (tunnel || rss_request_inner)
 986                 return 0;
 987 #endif
 988         /* Check if requested layer matches RSS hash fields. */
 989         if (!(rss_desc->types & layer_types))
 990                 return 0;
 991         return hash_fields;
 992 }
 993
 994 /**
 995  * Lookup and set the ptype in the data Rx part.  A single Ptype can be used,
 996  * if several tunnel rules are used on this queue, the tunnel ptype will be
 997  * cleared.
 998  *
 999  * @param rxq_ctrl
1000  *   Rx queue to update.
1001  */
1002 static void
1003 flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
1004 {
1005         unsigned int i;
1006         uint32_t tunnel_ptype = 0;
1007
1008         /* Look up for the ptype to use. */
1009         for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
1010                 if (!rxq_ctrl->flow_tunnels_n[i])
1011                         continue;
1012                 if (!tunnel_ptype) {
1013                         tunnel_ptype = tunnels_info[i].ptype;
1014                 } else {
1015                         tunnel_ptype = 0;
1016                         break;
1017                 }
1018         }
1019         rxq_ctrl->rxq.tunnel = tunnel_ptype;
1020 }
1021
1022 /**
1023  * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the devive
1024  * flow.
1025  *
1026  * @param[in] dev
1027  *   Pointer to the Ethernet device structure.
1028  * @param[in] dev_handle
1029  *   Pointer to device flow handle structure.
1030  */
1031 static void
1032 flow_drv_rxq_flags_set(struct rte_eth_dev *dev,
1033                        struct mlx5_flow_handle *dev_handle)
1034 {
1035         struct mlx5_priv *priv = dev->data->dev_private;
1036         const int mark = dev_handle->mark;
1037         const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
1038         struct mlx5_ind_table_obj *ind_tbl = NULL;
1039         unsigned int i;
1040
1041         if (dev_handle->fate_action == MLX5_FLOW_FATE_QUEUE) {
1042                 struct mlx5_hrxq *hrxq;
1043
1044                 hrxq = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_HRXQ],
1045                               dev_handle->rix_hrxq);
1046                 if (hrxq)
1047                         ind_tbl = hrxq->ind_table;
1048         } else if (dev_handle->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
1049                 struct mlx5_shared_action_rss *shared_rss;
1050
1051                 shared_rss = mlx5_ipool_get
1052                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
1053                          dev_handle->rix_srss);
1054                 if (shared_rss)
1055                         ind_tbl = shared_rss->ind_tbl;
1056         }
1057         if (!ind_tbl)
1058                 return;
1059         for (i = 0; i != ind_tbl->queues_n; ++i) {
1060                 int idx = ind_tbl->queues[i];
1061                 struct mlx5_rxq_ctrl *rxq_ctrl =
1062                         container_of((*priv->rxqs)[idx],
1063                                      struct mlx5_rxq_ctrl, rxq);
1064
1065                 /*
1066                  * To support metadata register copy on Tx loopback,
1067                  * this must be always enabled (metadata may arive
1068                  * from other port - not from local flows only.
1069                  */
1070                 if (priv->config.dv_flow_en &&
1071                     priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1072                     mlx5_flow_ext_mreg_supported(dev)) {
1073                         rxq_ctrl->rxq.mark = 1;
1074                         rxq_ctrl->flow_mark_n = 1;
1075                 } else if (mark) {
1076                         rxq_ctrl->rxq.mark = 1;
1077                         rxq_ctrl->flow_mark_n++;
1078                 }
1079                 if (tunnel) {
1080                         unsigned int j;
1081
1082                         /* Increase the counter matching the flow. */
1083                         for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
1084                                 if ((tunnels_info[j].tunnel &
1085                                      dev_handle->layers) ==
1086                                     tunnels_info[j].tunnel) {
1087                                         rxq_ctrl->flow_tunnels_n[j]++;
1088                                         break;
1089                                 }
1090                         }
1091                         flow_rxq_tunnel_ptype_update(rxq_ctrl);
1092                 }
1093         }
1094 }
1095
1096 /**
1097  * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) for a flow
1098  *
1099  * @param[in] dev
1100  *   Pointer to the Ethernet device structure.
1101  * @param[in] flow
1102  *   Pointer to flow structure.
1103  */
1104 static void
1105 flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
1106 {
1107         struct mlx5_priv *priv = dev->data->dev_private;
1108         uint32_t handle_idx;
1109         struct mlx5_flow_handle *dev_handle;
1110
1111         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
1112                        handle_idx, dev_handle, next)
1113                 flow_drv_rxq_flags_set(dev, dev_handle);
1114 }
1115
1116 /**
1117  * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
1118  * device flow if no other flow uses it with the same kind of request.
1119  *
1120  * @param dev
1121  *   Pointer to Ethernet device.
1122  * @param[in] dev_handle
1123  *   Pointer to the device flow handle structure.
1124  */
1125 static void
1126 flow_drv_rxq_flags_trim(struct rte_eth_dev *dev,
1127                         struct mlx5_flow_handle *dev_handle)
1128 {
1129         struct mlx5_priv *priv = dev->data->dev_private;
1130         const int mark = dev_handle->mark;
1131         const int tunnel = !!(dev_handle->layers & MLX5_FLOW_LAYER_TUNNEL);
1132         struct mlx5_ind_table_obj *ind_tbl = NULL;
1133         unsigned int i;
1134
1135         if (dev_handle->fate_action == MLX5_FLOW_FATE_QUEUE) {
1136                 struct mlx5_hrxq *hrxq;
1137
1138                 hrxq = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_HRXQ],
1139                               dev_handle->rix_hrxq);
1140                 if (hrxq)
1141                         ind_tbl = hrxq->ind_table;
1142         } else if (dev_handle->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
1143                 struct mlx5_shared_action_rss *shared_rss;
1144
1145                 shared_rss = mlx5_ipool_get
1146                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
1147                          dev_handle->rix_srss);
1148                 if (shared_rss)
1149                         ind_tbl = shared_rss->ind_tbl;
1150         }
1151         if (!ind_tbl)
1152                 return;
1153         MLX5_ASSERT(dev->data->dev_started);
1154         for (i = 0; i != ind_tbl->queues_n; ++i) {
1155                 int idx = ind_tbl->queues[i];
1156                 struct mlx5_rxq_ctrl *rxq_ctrl =
1157                         container_of((*priv->rxqs)[idx],
1158                                      struct mlx5_rxq_ctrl, rxq);
1159
1160                 if (priv->config.dv_flow_en &&
1161                     priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1162                     mlx5_flow_ext_mreg_supported(dev)) {
1163                         rxq_ctrl->rxq.mark = 1;
1164                         rxq_ctrl->flow_mark_n = 1;
1165                 } else if (mark) {
1166                         rxq_ctrl->flow_mark_n--;
1167                         rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
1168                 }
1169                 if (tunnel) {
1170                         unsigned int j;
1171
1172                         /* Decrease the counter matching the flow. */
1173                         for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
1174                                 if ((tunnels_info[j].tunnel &
1175                                      dev_handle->layers) ==
1176                                     tunnels_info[j].tunnel) {
1177                                         rxq_ctrl->flow_tunnels_n[j]--;
1178                                         break;
1179                                 }
1180                         }
1181                         flow_rxq_tunnel_ptype_update(rxq_ctrl);
1182                 }
1183         }
1184 }
1185
1186 /**
1187  * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
1188  * @p flow if no other flow uses it with the same kind of request.
1189  *
1190  * @param dev
1191  *   Pointer to Ethernet device.
1192  * @param[in] flow
1193  *   Pointer to the flow.
1194  */
1195 static void
1196 flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
1197 {
1198         struct mlx5_priv *priv = dev->data->dev_private;
1199         uint32_t handle_idx;
1200         struct mlx5_flow_handle *dev_handle;
1201
1202         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
1203                        handle_idx, dev_handle, next)
1204                 flow_drv_rxq_flags_trim(dev, dev_handle);
1205 }
1206
1207 /**
1208  * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
1209  *
1210  * @param dev
1211  *   Pointer to Ethernet device.
1212  */
1213 static void
1214 flow_rxq_flags_clear(struct rte_eth_dev *dev)
1215 {
1216         struct mlx5_priv *priv = dev->data->dev_private;
1217         unsigned int i;
1218
1219         for (i = 0; i != priv->rxqs_n; ++i) {
1220                 struct mlx5_rxq_ctrl *rxq_ctrl;
1221                 unsigned int j;
1222
1223                 if (!(*priv->rxqs)[i])
1224                         continue;
1225                 rxq_ctrl = container_of((*priv->rxqs)[i],
1226                                         struct mlx5_rxq_ctrl, rxq);
1227                 rxq_ctrl->flow_mark_n = 0;
1228                 rxq_ctrl->rxq.mark = 0;
1229                 for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
1230                         rxq_ctrl->flow_tunnels_n[j] = 0;
1231                 rxq_ctrl->rxq.tunnel = 0;
1232         }
1233 }
1234
1235 /**
1236  * Set the Rx queue dynamic metadata (mask and offset) for a flow
1237  *
1238  * @param[in] dev
1239  *   Pointer to the Ethernet device structure.
1240  */
1241 void
1242 mlx5_flow_rxq_dynf_metadata_set(struct rte_eth_dev *dev)
1243 {
1244         struct mlx5_priv *priv = dev->data->dev_private;
1245         struct mlx5_rxq_data *data;
1246         unsigned int i;
1247
1248         for (i = 0; i != priv->rxqs_n; ++i) {
1249                 if (!(*priv->rxqs)[i])
1250                         continue;
1251                 data = (*priv->rxqs)[i];
1252                 if (!rte_flow_dynf_metadata_avail()) {
1253                         data->dynf_meta = 0;
1254                         data->flow_meta_mask = 0;
1255                         data->flow_meta_offset = -1;
1256                         data->flow_meta_port_mask = 0;
1257                 } else {
1258                         data->dynf_meta = 1;
1259                         data->flow_meta_mask = rte_flow_dynf_metadata_mask;
1260                         data->flow_meta_offset = rte_flow_dynf_metadata_offs;
1261                         data->flow_meta_port_mask = (uint32_t)~0;
1262                         if (priv->config.dv_xmeta_en == MLX5_XMETA_MODE_META16)
1263                                 data->flow_meta_port_mask >>= 16;
1264                 }
1265         }
1266 }
1267
1268 /*
1269  * return a pointer to the desired action in the list of actions.
1270  *
1271  * @param[in] actions
1272  *   The list of actions to search the action in.
1273  * @param[in] action
1274  *   The action to find.
1275  *
1276  * @return
1277  *   Pointer to the action in the list, if found. NULL otherwise.
1278  */
1279 const struct rte_flow_action *
1280 mlx5_flow_find_action(const struct rte_flow_action *actions,
1281                       enum rte_flow_action_type action)
1282 {
1283         if (actions == NULL)
1284                 return NULL;
1285         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
1286                 if (actions->type == action)
1287                         return actions;
1288         return NULL;
1289 }
1290
1291 /*
1292  * Validate the flag action.
1293  *
1294  * @param[in] action_flags
1295  *   Bit-fields that holds the actions detected until now.
1296  * @param[in] attr
1297  *   Attributes of flow that includes this action.
1298  * @param[out] error
1299  *   Pointer to error structure.
1300  *
1301  * @return
1302  *   0 on success, a negative errno value otherwise and rte_errno is set.
1303  */
1304 int
1305 mlx5_flow_validate_action_flag(uint64_t action_flags,
1306                                const struct rte_flow_attr *attr,
1307                                struct rte_flow_error *error)
1308 {
1309         if (action_flags & MLX5_FLOW_ACTION_MARK)
1310                 return rte_flow_error_set(error, EINVAL,
1311                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1312                                           "can't mark and flag in same flow");
1313         if (action_flags & MLX5_FLOW_ACTION_FLAG)
1314                 return rte_flow_error_set(error, EINVAL,
1315                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1316                                           "can't have 2 flag"
1317                                           " actions in same flow");
1318         if (attr->egress)
1319                 return rte_flow_error_set(error, ENOTSUP,
1320                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1321                                           "flag action not supported for "
1322                                           "egress");
1323         return 0;
1324 }
1325
1326 /*
1327  * Validate the mark action.
1328  *
1329  * @param[in] action
1330  *   Pointer to the queue action.
1331  * @param[in] action_flags
1332  *   Bit-fields that holds the actions detected until now.
1333  * @param[in] attr
1334  *   Attributes of flow that includes this action.
1335  * @param[out] error
1336  *   Pointer to error structure.
1337  *
1338  * @return
1339  *   0 on success, a negative errno value otherwise and rte_errno is set.
1340  */
1341 int
1342 mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
1343                                uint64_t action_flags,
1344                                const struct rte_flow_attr *attr,
1345                                struct rte_flow_error *error)
1346 {
1347         const struct rte_flow_action_mark *mark = action->conf;
1348
1349         if (!mark)
1350                 return rte_flow_error_set(error, EINVAL,
1351                                           RTE_FLOW_ERROR_TYPE_ACTION,
1352                                           action,
1353                                           "configuration cannot be null");
1354         if (mark->id >= MLX5_FLOW_MARK_MAX)
1355                 return rte_flow_error_set(error, EINVAL,
1356                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1357                                           &mark->id,
1358                                           "mark id must in 0 <= id < "
1359                                           RTE_STR(MLX5_FLOW_MARK_MAX));
1360         if (action_flags & MLX5_FLOW_ACTION_FLAG)
1361                 return rte_flow_error_set(error, EINVAL,
1362                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1363                                           "can't flag and mark in same flow");
1364         if (action_flags & MLX5_FLOW_ACTION_MARK)
1365                 return rte_flow_error_set(error, EINVAL,
1366                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1367                                           "can't have 2 mark actions in same"
1368                                           " flow");
1369         if (attr->egress)
1370                 return rte_flow_error_set(error, ENOTSUP,
1371                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1372                                           "mark action not supported for "
1373                                           "egress");
1374         return 0;
1375 }
1376
1377 /*
1378  * Validate the drop action.
1379  *
1380  * @param[in] action_flags
1381  *   Bit-fields that holds the actions detected until now.
1382  * @param[in] attr
1383  *   Attributes of flow that includes this action.
1384  * @param[out] error
1385  *   Pointer to error structure.
1386  *
1387  * @return
1388  *   0 on success, a negative errno value otherwise and rte_errno is set.
1389  */
1390 int
1391 mlx5_flow_validate_action_drop(uint64_t action_flags __rte_unused,
1392                                const struct rte_flow_attr *attr,
1393                                struct rte_flow_error *error)
1394 {
1395         if (attr->egress)
1396                 return rte_flow_error_set(error, ENOTSUP,
1397                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1398                                           "drop action not supported for "
1399                                           "egress");
1400         return 0;
1401 }
1402
1403 /*
1404  * Validate the queue action.
1405  *
1406  * @param[in] action
1407  *   Pointer to the queue action.
1408  * @param[in] action_flags
1409  *   Bit-fields that holds the actions detected until now.
1410  * @param[in] dev
1411  *   Pointer to the Ethernet device structure.
1412  * @param[in] attr
1413  *   Attributes of flow that includes this action.
1414  * @param[out] error
1415  *   Pointer to error structure.
1416  *
1417  * @return
1418  *   0 on success, a negative errno value otherwise and rte_errno is set.
1419  */
1420 int
1421 mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
1422                                 uint64_t action_flags,
1423                                 struct rte_eth_dev *dev,
1424                                 const struct rte_flow_attr *attr,
1425                                 struct rte_flow_error *error)
1426 {
1427         struct mlx5_priv *priv = dev->data->dev_private;
1428         const struct rte_flow_action_queue *queue = action->conf;
1429
1430         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1431                 return rte_flow_error_set(error, EINVAL,
1432                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1433                                           "can't have 2 fate actions in"
1434                                           " same flow");
1435         if (!priv->rxqs_n)
1436                 return rte_flow_error_set(error, EINVAL,
1437                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1438                                           NULL, "No Rx queues configured");
1439         if (queue->index >= priv->rxqs_n)
1440                 return rte_flow_error_set(error, EINVAL,
1441                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1442                                           &queue->index,
1443                                           "queue index out of range");
1444         if (!(*priv->rxqs)[queue->index])
1445                 return rte_flow_error_set(error, EINVAL,
1446                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1447                                           &queue->index,
1448                                           "queue is not configured");
1449         if (attr->egress)
1450                 return rte_flow_error_set(error, ENOTSUP,
1451                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1452                                           "queue action not supported for "
1453                                           "egress");
1454         return 0;
1455 }
1456
1457 /*
1458  * Validate the rss action.
1459  *
1460  * @param[in] dev
1461  *   Pointer to the Ethernet device structure.
1462  * @param[in] action
1463  *   Pointer to the queue action.
1464  * @param[out] error
1465  *   Pointer to error structure.
1466  *
1467  * @return
1468  *   0 on success, a negative errno value otherwise and rte_errno is set.
1469  */
1470 int
1471 mlx5_validate_action_rss(struct rte_eth_dev *dev,
1472                          const struct rte_flow_action *action,
1473                          struct rte_flow_error *error)
1474 {
1475         struct mlx5_priv *priv = dev->data->dev_private;
1476         const struct rte_flow_action_rss *rss = action->conf;
1477         enum mlx5_rxq_type rxq_type = MLX5_RXQ_TYPE_UNDEFINED;
1478         unsigned int i;
1479
1480         if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
1481             rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
1482                 return rte_flow_error_set(error, ENOTSUP,
1483                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1484                                           &rss->func,
1485                                           "RSS hash function not supported");
1486 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1487         if (rss->level > 2)
1488 #else
1489         if (rss->level > 1)
1490 #endif
1491                 return rte_flow_error_set(error, ENOTSUP,
1492                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1493                                           &rss->level,
1494                                           "tunnel RSS is not supported");
1495         /* allow RSS key_len 0 in case of NULL (default) RSS key. */
1496         if (rss->key_len == 0 && rss->key != NULL)
1497                 return rte_flow_error_set(error, ENOTSUP,
1498                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1499                                           &rss->key_len,
1500                                           "RSS hash key length 0");
1501         if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
1502                 return rte_flow_error_set(error, ENOTSUP,
1503                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1504                                           &rss->key_len,
1505                                           "RSS hash key too small");
1506         if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
1507                 return rte_flow_error_set(error, ENOTSUP,
1508                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1509                                           &rss->key_len,
1510                                           "RSS hash key too large");
1511         if (rss->queue_num > priv->config.ind_table_max_size)
1512                 return rte_flow_error_set(error, ENOTSUP,
1513                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1514                                           &rss->queue_num,
1515                                           "number of queues too large");
1516         if (rss->types & MLX5_RSS_HF_MASK)
1517                 return rte_flow_error_set(error, ENOTSUP,
1518                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1519                                           &rss->types,
1520                                           "some RSS protocols are not"
1521                                           " supported");
1522         if ((rss->types & (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY)) &&
1523             !(rss->types & ETH_RSS_IP))
1524                 return rte_flow_error_set(error, EINVAL,
1525                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1526                                           "L3 partial RSS requested but L3 RSS"
1527                                           " type not specified");
1528         if ((rss->types & (ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)) &&
1529             !(rss->types & (ETH_RSS_UDP | ETH_RSS_TCP)))
1530                 return rte_flow_error_set(error, EINVAL,
1531                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1532                                           "L4 partial RSS requested but L4 RSS"
1533                                           " type not specified");
1534         if (!priv->rxqs_n)
1535                 return rte_flow_error_set(error, EINVAL,
1536                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1537                                           NULL, "No Rx queues configured");
1538         if (!rss->queue_num)
1539                 return rte_flow_error_set(error, EINVAL,
1540                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1541                                           NULL, "No queues configured");
1542         for (i = 0; i != rss->queue_num; ++i) {
1543                 struct mlx5_rxq_ctrl *rxq_ctrl;
1544
1545                 if (rss->queue[i] >= priv->rxqs_n)
1546                         return rte_flow_error_set
1547                                 (error, EINVAL,
1548                                  RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1549                                  &rss->queue[i], "queue index out of range");
1550                 if (!(*priv->rxqs)[rss->queue[i]])
1551                         return rte_flow_error_set
1552                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1553                                  &rss->queue[i], "queue is not configured");
1554                 rxq_ctrl = container_of((*priv->rxqs)[rss->queue[i]],
1555                                         struct mlx5_rxq_ctrl, rxq);
1556                 if (i == 0)
1557                         rxq_type = rxq_ctrl->type;
1558                 if (rxq_type != rxq_ctrl->type)
1559                         return rte_flow_error_set
1560                                 (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
1561                                  &rss->queue[i],
1562                                  "combining hairpin and regular RSS queues is not supported");
1563         }
1564         return 0;
1565 }
1566
1567 /*
1568  * Validate the rss action.
1569  *
1570  * @param[in] action
1571  *   Pointer to the queue action.
1572  * @param[in] action_flags
1573  *   Bit-fields that holds the actions detected until now.
1574  * @param[in] dev
1575  *   Pointer to the Ethernet device structure.
1576  * @param[in] attr
1577  *   Attributes of flow that includes this action.
1578  * @param[in] item_flags
1579  *   Items that were detected.
1580  * @param[out] error
1581  *   Pointer to error structure.
1582  *
1583  * @return
1584  *   0 on success, a negative errno value otherwise and rte_errno is set.
1585  */
1586 int
1587 mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
1588                               uint64_t action_flags,
1589                               struct rte_eth_dev *dev,
1590                               const struct rte_flow_attr *attr,
1591                               uint64_t item_flags,
1592                               struct rte_flow_error *error)
1593 {
1594         const struct rte_flow_action_rss *rss = action->conf;
1595         int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1596         int ret;
1597
1598         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1599                 return rte_flow_error_set(error, EINVAL,
1600                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1601                                           "can't have 2 fate actions"
1602                                           " in same flow");
1603         ret = mlx5_validate_action_rss(dev, action, error);
1604         if (ret)
1605                 return ret;
1606         if (attr->egress)
1607                 return rte_flow_error_set(error, ENOTSUP,
1608                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1609                                           "rss action not supported for "
1610                                           "egress");
1611         if (rss->level > 1 && !tunnel)
1612                 return rte_flow_error_set(error, EINVAL,
1613                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1614                                           "inner RSS is not supported for "
1615                                           "non-tunnel flows");
1616         if ((item_flags & MLX5_FLOW_LAYER_ECPRI) &&
1617             !(item_flags & MLX5_FLOW_LAYER_INNER_L4_UDP)) {
1618                 return rte_flow_error_set(error, EINVAL,
1619                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
1620                                           "RSS on eCPRI is not supported now");
1621         }
1622         return 0;
1623 }
1624
1625 /*
1626  * Validate the default miss action.
1627  *
1628  * @param[in] action_flags
1629  *   Bit-fields that holds the actions detected until now.
1630  * @param[out] error
1631  *   Pointer to error structure.
1632  *
1633  * @return
1634  *   0 on success, a negative errno value otherwise and rte_errno is set.
1635  */
1636 int
1637 mlx5_flow_validate_action_default_miss(uint64_t action_flags,
1638                                 const struct rte_flow_attr *attr,
1639                                 struct rte_flow_error *error)
1640 {
1641         if (action_flags & MLX5_FLOW_FATE_ACTIONS)
1642                 return rte_flow_error_set(error, EINVAL,
1643                                           RTE_FLOW_ERROR_TYPE_ACTION, NULL,
1644                                           "can't have 2 fate actions in"
1645                                           " same flow");
1646         if (attr->egress)
1647                 return rte_flow_error_set(error, ENOTSUP,
1648                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1649                                           "default miss action not supported "
1650                                           "for egress");
1651         if (attr->group)
1652                 return rte_flow_error_set(error, ENOTSUP,
1653                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP, NULL,
1654                                           "only group 0 is supported");
1655         if (attr->transfer)
1656                 return rte_flow_error_set(error, ENOTSUP,
1657                                           RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
1658                                           NULL, "transfer is not supported");
1659         return 0;
1660 }
1661
1662 /*
1663  * Validate the count action.
1664  *
1665  * @param[in] dev
1666  *   Pointer to the Ethernet device structure.
1667  * @param[in] attr
1668  *   Attributes of flow that includes this action.
1669  * @param[out] error
1670  *   Pointer to error structure.
1671  *
1672  * @return
1673  *   0 on success, a negative errno value otherwise and rte_errno is set.
1674  */
1675 int
1676 mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
1677                                 const struct rte_flow_attr *attr,
1678                                 struct rte_flow_error *error)
1679 {
1680         if (attr->egress)
1681                 return rte_flow_error_set(error, ENOTSUP,
1682                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1683                                           "count action not supported for "
1684                                           "egress");
1685         return 0;
1686 }
1687
1688 /**
1689  * Verify the @p attributes will be correctly understood by the NIC and store
1690  * them in the @p flow if everything is correct.
1691  *
1692  * @param[in] dev
1693  *   Pointer to the Ethernet device structure.
1694  * @param[in] attributes
1695  *   Pointer to flow attributes
1696  * @param[out] error
1697  *   Pointer to error structure.
1698  *
1699  * @return
1700  *   0 on success, a negative errno value otherwise and rte_errno is set.
1701  */
1702 int
1703 mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
1704                               const struct rte_flow_attr *attributes,
1705                               struct rte_flow_error *error)
1706 {
1707         struct mlx5_priv *priv = dev->data->dev_private;
1708         uint32_t priority_max = priv->config.flow_prio - 1;
1709
1710         if (attributes->group)
1711                 return rte_flow_error_set(error, ENOTSUP,
1712                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
1713                                           NULL, "groups is not supported");
1714         if (attributes->priority != MLX5_FLOW_LOWEST_PRIO_INDICATOR &&
1715             attributes->priority >= priority_max)
1716                 return rte_flow_error_set(error, ENOTSUP,
1717                                           RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
1718                                           NULL, "priority out of range");
1719         if (attributes->egress)
1720                 return rte_flow_error_set(error, ENOTSUP,
1721                                           RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
1722                                           "egress is not supported");
1723         if (attributes->transfer && !priv->config.dv_esw_en)
1724                 return rte_flow_error_set(error, ENOTSUP,
1725                                           RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
1726                                           NULL, "transfer is not supported");
1727         if (!attributes->ingress)
1728                 return rte_flow_error_set(error, EINVAL,
1729                                           RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
1730                                           NULL,
1731                                           "ingress attribute is mandatory");
1732         return 0;
1733 }
1734
1735 /**
1736  * Validate ICMP6 item.
1737  *
1738  * @param[in] item
1739  *   Item specification.
1740  * @param[in] item_flags
1741  *   Bit-fields that holds the items detected until now.
1742  * @param[in] ext_vlan_sup
1743  *   Whether extended VLAN features are supported or not.
1744  * @param[out] error
1745  *   Pointer to error structure.
1746  *
1747  * @return
1748  *   0 on success, a negative errno value otherwise and rte_errno is set.
1749  */
1750 int
1751 mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
1752                                uint64_t item_flags,
1753                                uint8_t target_protocol,
1754                                struct rte_flow_error *error)
1755 {
1756         const struct rte_flow_item_icmp6 *mask = item->mask;
1757         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1758         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
1759                                       MLX5_FLOW_LAYER_OUTER_L3_IPV6;
1760         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1761                                       MLX5_FLOW_LAYER_OUTER_L4;
1762         int ret;
1763
1764         if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMPV6)
1765                 return rte_flow_error_set(error, EINVAL,
1766                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1767                                           "protocol filtering not compatible"
1768                                           " with ICMP6 layer");
1769         if (!(item_flags & l3m))
1770                 return rte_flow_error_set(error, EINVAL,
1771                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1772                                           "IPv6 is mandatory to filter on"
1773                                           " ICMP6");
1774         if (item_flags & l4m)
1775                 return rte_flow_error_set(error, EINVAL,
1776                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1777                                           "multiple L4 layers not supported");
1778         if (!mask)
1779                 mask = &rte_flow_item_icmp6_mask;
1780         ret = mlx5_flow_item_acceptable
1781                 (item, (const uint8_t *)mask,
1782                  (const uint8_t *)&rte_flow_item_icmp6_mask,
1783                  sizeof(struct rte_flow_item_icmp6),
1784                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1785         if (ret < 0)
1786                 return ret;
1787         return 0;
1788 }
1789
1790 /**
1791  * Validate ICMP item.
1792  *
1793  * @param[in] item
1794  *   Item specification.
1795  * @param[in] item_flags
1796  *   Bit-fields that holds the items detected until now.
1797  * @param[out] error
1798  *   Pointer to error structure.
1799  *
1800  * @return
1801  *   0 on success, a negative errno value otherwise and rte_errno is set.
1802  */
1803 int
1804 mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
1805                              uint64_t item_flags,
1806                              uint8_t target_protocol,
1807                              struct rte_flow_error *error)
1808 {
1809         const struct rte_flow_item_icmp *mask = item->mask;
1810         const struct rte_flow_item_icmp nic_mask = {
1811                 .hdr.icmp_type = 0xff,
1812                 .hdr.icmp_code = 0xff,
1813                 .hdr.icmp_ident = RTE_BE16(0xffff),
1814                 .hdr.icmp_seq_nb = RTE_BE16(0xffff),
1815         };
1816         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1817         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
1818                                       MLX5_FLOW_LAYER_OUTER_L3_IPV4;
1819         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
1820                                       MLX5_FLOW_LAYER_OUTER_L4;
1821         int ret;
1822
1823         if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMP)
1824                 return rte_flow_error_set(error, EINVAL,
1825                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1826                                           "protocol filtering not compatible"
1827                                           " with ICMP layer");
1828         if (!(item_flags & l3m))
1829                 return rte_flow_error_set(error, EINVAL,
1830                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1831                                           "IPv4 is mandatory to filter"
1832                                           " on ICMP");
1833         if (item_flags & l4m)
1834                 return rte_flow_error_set(error, EINVAL,
1835                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1836                                           "multiple L4 layers not supported");
1837         if (!mask)
1838                 mask = &nic_mask;
1839         ret = mlx5_flow_item_acceptable
1840                 (item, (const uint8_t *)mask,
1841                  (const uint8_t *)&nic_mask,
1842                  sizeof(struct rte_flow_item_icmp),
1843                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1844         if (ret < 0)
1845                 return ret;
1846         return 0;
1847 }
1848
1849 /**
1850  * Validate Ethernet item.
1851  *
1852  * @param[in] item
1853  *   Item specification.
1854  * @param[in] item_flags
1855  *   Bit-fields that holds the items detected until now.
1856  * @param[out] error
1857  *   Pointer to error structure.
1858  *
1859  * @return
1860  *   0 on success, a negative errno value otherwise and rte_errno is set.
1861  */
1862 int
1863 mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
1864                             uint64_t item_flags, bool ext_vlan_sup,
1865                             struct rte_flow_error *error)
1866 {
1867         const struct rte_flow_item_eth *mask = item->mask;
1868         const struct rte_flow_item_eth nic_mask = {
1869                 .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1870                 .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
1871                 .type = RTE_BE16(0xffff),
1872                 .has_vlan = ext_vlan_sup ? 1 : 0,
1873         };
1874         int ret;
1875         int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1876         const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
1877                                        MLX5_FLOW_LAYER_OUTER_L2;
1878
1879         if (item_flags & ethm)
1880                 return rte_flow_error_set(error, ENOTSUP,
1881                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1882                                           "multiple L2 layers not supported");
1883         if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_L3)) ||
1884             (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3)))
1885                 return rte_flow_error_set(error, EINVAL,
1886                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1887                                           "L2 layer should not follow "
1888                                           "L3 layers");
1889         if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)) ||
1890             (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_VLAN)))
1891                 return rte_flow_error_set(error, EINVAL,
1892                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1893                                           "L2 layer should not follow VLAN");
1894         if (!mask)
1895                 mask = &rte_flow_item_eth_mask;
1896         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1897                                         (const uint8_t *)&nic_mask,
1898                                         sizeof(struct rte_flow_item_eth),
1899                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1900         return ret;
1901 }
1902
1903 /**
1904  * Validate VLAN item.
1905  *
1906  * @param[in] item
1907  *   Item specification.
1908  * @param[in] item_flags
1909  *   Bit-fields that holds the items detected until now.
1910  * @param[in] dev
1911  *   Ethernet device flow is being created on.
1912  * @param[out] error
1913  *   Pointer to error structure.
1914  *
1915  * @return
1916  *   0 on success, a negative errno value otherwise and rte_errno is set.
1917  */
1918 int
1919 mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
1920                              uint64_t item_flags,
1921                              struct rte_eth_dev *dev,
1922                              struct rte_flow_error *error)
1923 {
1924         const struct rte_flow_item_vlan *spec = item->spec;
1925         const struct rte_flow_item_vlan *mask = item->mask;
1926         const struct rte_flow_item_vlan nic_mask = {
1927                 .tci = RTE_BE16(UINT16_MAX),
1928                 .inner_type = RTE_BE16(UINT16_MAX),
1929         };
1930         uint16_t vlan_tag = 0;
1931         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
1932         int ret;
1933         const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
1934                                         MLX5_FLOW_LAYER_INNER_L4) :
1935                                        (MLX5_FLOW_LAYER_OUTER_L3 |
1936                                         MLX5_FLOW_LAYER_OUTER_L4);
1937         const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
1938                                         MLX5_FLOW_LAYER_OUTER_VLAN;
1939
1940         if (item_flags & vlanm)
1941                 return rte_flow_error_set(error, EINVAL,
1942                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1943                                           "multiple VLAN layers not supported");
1944         else if ((item_flags & l34m) != 0)
1945                 return rte_flow_error_set(error, EINVAL,
1946                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
1947                                           "VLAN cannot follow L3/L4 layer");
1948         if (!mask)
1949                 mask = &rte_flow_item_vlan_mask;
1950         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
1951                                         (const uint8_t *)&nic_mask,
1952                                         sizeof(struct rte_flow_item_vlan),
1953                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
1954         if (ret)
1955                 return ret;
1956         if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
1957                 struct mlx5_priv *priv = dev->data->dev_private;
1958
1959                 if (priv->vmwa_context) {
1960                         /*
1961                          * Non-NULL context means we have a virtual machine
1962                          * and SR-IOV enabled, we have to create VLAN interface
1963                          * to make hypervisor to setup E-Switch vport
1964                          * context correctly. We avoid creating the multiple
1965                          * VLAN interfaces, so we cannot support VLAN tag mask.
1966                          */
1967                         return rte_flow_error_set(error, EINVAL,
1968                                                   RTE_FLOW_ERROR_TYPE_ITEM,
1969                                                   item,
1970                                                   "VLAN tag mask is not"
1971                                                   " supported in virtual"
1972                                                   " environment");
1973                 }
1974         }
1975         if (spec) {
1976                 vlan_tag = spec->tci;
1977                 vlan_tag &= mask->tci;
1978         }
1979         /*
1980          * From verbs perspective an empty VLAN is equivalent
1981          * to a packet without VLAN layer.
1982          */
1983         if (!vlan_tag)
1984                 return rte_flow_error_set(error, EINVAL,
1985                                           RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
1986                                           item->spec,
1987                                           "VLAN cannot be empty");
1988         return 0;
1989 }
1990
1991 /**
1992  * Validate IPV4 item.
1993  *
1994  * @param[in] item
1995  *   Item specification.
1996  * @param[in] item_flags
1997  *   Bit-fields that holds the items detected until now.
1998  * @param[in] last_item
1999  *   Previous validated item in the pattern items.
2000  * @param[in] ether_type
2001  *   Type in the ethernet layer header (including dot1q).
2002  * @param[in] acc_mask
2003  *   Acceptable mask, if NULL default internal default mask
2004  *   will be used to check whether item fields are supported.
2005  * @param[in] range_accepted
2006  *   True if range of values is accepted for specific fields, false otherwise.
2007  * @param[out] error
2008  *   Pointer to error structure.
2009  *
2010  * @return
2011  *   0 on success, a negative errno value otherwise and rte_errno is set.
2012  */
2013 int
2014 mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
2015                              uint64_t item_flags,
2016                              uint64_t last_item,
2017                              uint16_t ether_type,
2018                              const struct rte_flow_item_ipv4 *acc_mask,
2019                              bool range_accepted,
2020                              struct rte_flow_error *error)
2021 {
2022         const struct rte_flow_item_ipv4 *mask = item->mask;
2023         const struct rte_flow_item_ipv4 *spec = item->spec;
2024         const struct rte_flow_item_ipv4 nic_mask = {
2025                 .hdr = {
2026                         .src_addr = RTE_BE32(0xffffffff),
2027                         .dst_addr = RTE_BE32(0xffffffff),
2028                         .type_of_service = 0xff,
2029                         .next_proto_id = 0xff,
2030                 },
2031         };
2032         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2033         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2034                                       MLX5_FLOW_LAYER_OUTER_L3;
2035         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2036                                       MLX5_FLOW_LAYER_OUTER_L4;
2037         int ret;
2038         uint8_t next_proto = 0xFF;
2039         const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
2040                                   MLX5_FLOW_LAYER_OUTER_VLAN |
2041                                   MLX5_FLOW_LAYER_INNER_VLAN);
2042
2043         if ((last_item & l2_vlan) && ether_type &&
2044             ether_type != RTE_ETHER_TYPE_IPV4)
2045                 return rte_flow_error_set(error, EINVAL,
2046                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2047                                           "IPv4 cannot follow L2/VLAN layer "
2048                                           "which ether type is not IPv4");
2049         if (item_flags & MLX5_FLOW_LAYER_IPIP) {
2050                 if (mask && spec)
2051                         next_proto = mask->hdr.next_proto_id &
2052                                      spec->hdr.next_proto_id;
2053                 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
2054                         return rte_flow_error_set(error, EINVAL,
2055                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2056                                                   item,
2057                                                   "multiple tunnel "
2058                                                   "not supported");
2059         }
2060         if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP)
2061                 return rte_flow_error_set(error, EINVAL,
2062                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2063                                           "wrong tunnel type - IPv6 specified "
2064                                           "but IPv4 item provided");
2065         if (item_flags & l3m)
2066                 return rte_flow_error_set(error, ENOTSUP,
2067                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2068                                           "multiple L3 layers not supported");
2069         else if (item_flags & l4m)
2070                 return rte_flow_error_set(error, EINVAL,
2071                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2072                                           "L3 cannot follow an L4 layer.");
2073         else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
2074                   !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
2075                 return rte_flow_error_set(error, EINVAL,
2076                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2077                                           "L3 cannot follow an NVGRE layer.");
2078         if (!mask)
2079                 mask = &rte_flow_item_ipv4_mask;
2080         else if (mask->hdr.next_proto_id != 0 &&
2081                  mask->hdr.next_proto_id != 0xff)
2082                 return rte_flow_error_set(error, EINVAL,
2083                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
2084                                           "partial mask is not supported"
2085                                           " for protocol");
2086         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
2087                                         acc_mask ? (const uint8_t *)acc_mask
2088                                                  : (const uint8_t *)&nic_mask,
2089                                         sizeof(struct rte_flow_item_ipv4),
2090                                         range_accepted, error);
2091         if (ret < 0)
2092                 return ret;
2093         return 0;
2094 }
2095
2096 /**
2097  * Validate IPV6 item.
2098  *
2099  * @param[in] item
2100  *   Item specification.
2101  * @param[in] item_flags
2102  *   Bit-fields that holds the items detected until now.
2103  * @param[in] last_item
2104  *   Previous validated item in the pattern items.
2105  * @param[in] ether_type
2106  *   Type in the ethernet layer header (including dot1q).
2107  * @param[in] acc_mask
2108  *   Acceptable mask, if NULL default internal default mask
2109  *   will be used to check whether item fields are supported.
2110  * @param[out] error
2111  *   Pointer to error structure.
2112  *
2113  * @return
2114  *   0 on success, a negative errno value otherwise and rte_errno is set.
2115  */
2116 int
2117 mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
2118                              uint64_t item_flags,
2119                              uint64_t last_item,
2120                              uint16_t ether_type,
2121                              const struct rte_flow_item_ipv6 *acc_mask,
2122                              struct rte_flow_error *error)
2123 {
2124         const struct rte_flow_item_ipv6 *mask = item->mask;
2125         const struct rte_flow_item_ipv6 *spec = item->spec;
2126         const struct rte_flow_item_ipv6 nic_mask = {
2127                 .hdr = {
2128                         .src_addr =
2129                                 "\xff\xff\xff\xff\xff\xff\xff\xff"
2130                                 "\xff\xff\xff\xff\xff\xff\xff\xff",
2131                         .dst_addr =
2132                                 "\xff\xff\xff\xff\xff\xff\xff\xff"
2133                                 "\xff\xff\xff\xff\xff\xff\xff\xff",
2134                         .vtc_flow = RTE_BE32(0xffffffff),
2135                         .proto = 0xff,
2136                 },
2137         };
2138         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2139         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2140                                       MLX5_FLOW_LAYER_OUTER_L3;
2141         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2142                                       MLX5_FLOW_LAYER_OUTER_L4;
2143         int ret;
2144         uint8_t next_proto = 0xFF;
2145         const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
2146                                   MLX5_FLOW_LAYER_OUTER_VLAN |
2147                                   MLX5_FLOW_LAYER_INNER_VLAN);
2148
2149         if ((last_item & l2_vlan) && ether_type &&
2150             ether_type != RTE_ETHER_TYPE_IPV6)
2151                 return rte_flow_error_set(error, EINVAL,
2152                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2153                                           "IPv6 cannot follow L2/VLAN layer "
2154                                           "which ether type is not IPv6");
2155         if (mask && mask->hdr.proto == UINT8_MAX && spec)
2156                 next_proto = spec->hdr.proto;
2157         if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP) {
2158                 if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
2159                         return rte_flow_error_set(error, EINVAL,
2160                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2161                                                   item,
2162                                                   "multiple tunnel "
2163                                                   "not supported");
2164         }
2165         if (next_proto == IPPROTO_HOPOPTS  ||
2166             next_proto == IPPROTO_ROUTING  ||
2167             next_proto == IPPROTO_FRAGMENT ||
2168             next_proto == IPPROTO_ESP      ||
2169             next_proto == IPPROTO_AH       ||
2170             next_proto == IPPROTO_DSTOPTS)
2171                 return rte_flow_error_set(error, EINVAL,
2172                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2173                                           "IPv6 proto (next header) should "
2174                                           "not be set as extension header");
2175         if (item_flags & MLX5_FLOW_LAYER_IPIP)
2176                 return rte_flow_error_set(error, EINVAL,
2177                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2178                                           "wrong tunnel type - IPv4 specified "
2179                                           "but IPv6 item provided");
2180         if (item_flags & l3m)
2181                 return rte_flow_error_set(error, ENOTSUP,
2182                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2183                                           "multiple L3 layers not supported");
2184         else if (item_flags & l4m)
2185                 return rte_flow_error_set(error, EINVAL,
2186                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2187                                           "L3 cannot follow an L4 layer.");
2188         else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
2189                   !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
2190                 return rte_flow_error_set(error, EINVAL,
2191                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2192                                           "L3 cannot follow an NVGRE layer.");
2193         if (!mask)
2194                 mask = &rte_flow_item_ipv6_mask;
2195         ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
2196                                         acc_mask ? (const uint8_t *)acc_mask
2197                                                  : (const uint8_t *)&nic_mask,
2198                                         sizeof(struct rte_flow_item_ipv6),
2199                                         MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2200         if (ret < 0)
2201                 return ret;
2202         return 0;
2203 }
2204
2205 /**
2206  * Validate UDP item.
2207  *
2208  * @param[in] item
2209  *   Item specification.
2210  * @param[in] item_flags
2211  *   Bit-fields that holds the items detected until now.
2212  * @param[in] target_protocol
2213  *   The next protocol in the previous item.
2214  * @param[in] flow_mask
2215  *   mlx5 flow-specific (DV, verbs, etc.) supported header fields mask.
2216  * @param[out] error
2217  *   Pointer to error structure.
2218  *
2219  * @return
2220  *   0 on success, a negative errno value otherwise and rte_errno is set.
2221  */
2222 int
2223 mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
2224                             uint64_t item_flags,
2225                             uint8_t target_protocol,
2226                             struct rte_flow_error *error)
2227 {
2228         const struct rte_flow_item_udp *mask = item->mask;
2229         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2230         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2231                                       MLX5_FLOW_LAYER_OUTER_L3;
2232         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2233                                       MLX5_FLOW_LAYER_OUTER_L4;
2234         int ret;
2235
2236         if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
2237                 return rte_flow_error_set(error, EINVAL,
2238                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2239                                           "protocol filtering not compatible"
2240                                           " with UDP layer");
2241         if (!(item_flags & l3m))
2242                 return rte_flow_error_set(error, EINVAL,
2243                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2244                                           "L3 is mandatory to filter on L4");
2245         if (item_flags & l4m)
2246                 return rte_flow_error_set(error, EINVAL,
2247                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2248                                           "multiple L4 layers not supported");
2249         if (!mask)
2250                 mask = &rte_flow_item_udp_mask;
2251         ret = mlx5_flow_item_acceptable
2252                 (item, (const uint8_t *)mask,
2253                  (const uint8_t *)&rte_flow_item_udp_mask,
2254                  sizeof(struct rte_flow_item_udp), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2255                  error);
2256         if (ret < 0)
2257                 return ret;
2258         return 0;
2259 }
2260
2261 /**
2262  * Validate TCP item.
2263  *
2264  * @param[in] item
2265  *   Item specification.
2266  * @param[in] item_flags
2267  *   Bit-fields that holds the items detected until now.
2268  * @param[in] target_protocol
2269  *   The next protocol in the previous item.
2270  * @param[out] error
2271  *   Pointer to error structure.
2272  *
2273  * @return
2274  *   0 on success, a negative errno value otherwise and rte_errno is set.
2275  */
2276 int
2277 mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
2278                             uint64_t item_flags,
2279                             uint8_t target_protocol,
2280                             const struct rte_flow_item_tcp *flow_mask,
2281                             struct rte_flow_error *error)
2282 {
2283         const struct rte_flow_item_tcp *mask = item->mask;
2284         const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
2285         const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
2286                                       MLX5_FLOW_LAYER_OUTER_L3;
2287         const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
2288                                       MLX5_FLOW_LAYER_OUTER_L4;
2289         int ret;
2290
2291         MLX5_ASSERT(flow_mask);
2292         if (target_protocol != 0xff && target_protocol != IPPROTO_TCP)
2293                 return rte_flow_error_set(error, EINVAL,
2294                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2295                                           "protocol filtering not compatible"
2296                                           " with TCP layer");
2297         if (!(item_flags & l3m))
2298                 return rte_flow_error_set(error, EINVAL,
2299                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2300                                           "L3 is mandatory to filter on L4");
2301         if (item_flags & l4m)
2302                 return rte_flow_error_set(error, EINVAL,
2303                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2304                                           "multiple L4 layers not supported");
2305         if (!mask)
2306                 mask = &rte_flow_item_tcp_mask;
2307         ret = mlx5_flow_item_acceptable
2308                 (item, (const uint8_t *)mask,
2309                  (const uint8_t *)flow_mask,
2310                  sizeof(struct rte_flow_item_tcp), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2311                  error);
2312         if (ret < 0)
2313                 return ret;
2314         return 0;
2315 }
2316
2317 /**
2318  * Validate VXLAN item.
2319  *
2320  * @param[in] item
2321  *   Item specification.
2322  * @param[in] item_flags
2323  *   Bit-fields that holds the items detected until now.
2324  * @param[in] target_protocol
2325  *   The next protocol in the previous item.
2326  * @param[out] error
2327  *   Pointer to error structure.
2328  *
2329  * @return
2330  *   0 on success, a negative errno value otherwise and rte_errno is set.
2331  */
2332 int
2333 mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
2334                               uint64_t item_flags,
2335                               struct rte_flow_error *error)
2336 {
2337         const struct rte_flow_item_vxlan *spec = item->spec;
2338         const struct rte_flow_item_vxlan *mask = item->mask;
2339         int ret;
2340         union vni {
2341                 uint32_t vlan_id;
2342                 uint8_t vni[4];
2343         } id = { .vlan_id = 0, };
2344
2345
2346         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2347                 return rte_flow_error_set(error, ENOTSUP,
2348                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2349                                           "multiple tunnel layers not"
2350                                           " supported");
2351         /*
2352          * Verify only UDPv4 is present as defined in
2353          * https://tools.ietf.org/html/rfc7348
2354          */
2355         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2356                 return rte_flow_error_set(error, EINVAL,
2357                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2358                                           "no outer UDP layer found");
2359         if (!mask)
2360                 mask = &rte_flow_item_vxlan_mask;
2361         ret = mlx5_flow_item_acceptable
2362                 (item, (const uint8_t *)mask,
2363                  (const uint8_t *)&rte_flow_item_vxlan_mask,
2364                  sizeof(struct rte_flow_item_vxlan),
2365                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2366         if (ret < 0)
2367                 return ret;
2368         if (spec) {
2369                 memcpy(&id.vni[1], spec->vni, 3);
2370                 memcpy(&id.vni[1], mask->vni, 3);
2371         }
2372         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2373                 return rte_flow_error_set(error, ENOTSUP,
2374                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2375                                           "VXLAN tunnel must be fully defined");
2376         return 0;
2377 }
2378
2379 /**
2380  * Validate VXLAN_GPE item.
2381  *
2382  * @param[in] item
2383  *   Item specification.
2384  * @param[in] item_flags
2385  *   Bit-fields that holds the items detected until now.
2386  * @param[in] priv
2387  *   Pointer to the private data structure.
2388  * @param[in] target_protocol
2389  *   The next protocol in the previous item.
2390  * @param[out] error
2391  *   Pointer to error structure.
2392  *
2393  * @return
2394  *   0 on success, a negative errno value otherwise and rte_errno is set.
2395  */
2396 int
2397 mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
2398                                   uint64_t item_flags,
2399                                   struct rte_eth_dev *dev,
2400                                   struct rte_flow_error *error)
2401 {
2402         struct mlx5_priv *priv = dev->data->dev_private;
2403         const struct rte_flow_item_vxlan_gpe *spec = item->spec;
2404         const struct rte_flow_item_vxlan_gpe *mask = item->mask;
2405         int ret;
2406         union vni {
2407                 uint32_t vlan_id;
2408                 uint8_t vni[4];
2409         } id = { .vlan_id = 0, };
2410
2411         if (!priv->config.l3_vxlan_en)
2412                 return rte_flow_error_set(error, ENOTSUP,
2413                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2414                                           "L3 VXLAN is not enabled by device"
2415                                           " parameter and/or not configured in"
2416                                           " firmware");
2417         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2418                 return rte_flow_error_set(error, ENOTSUP,
2419                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2420                                           "multiple tunnel layers not"
2421                                           " supported");
2422         /*
2423          * Verify only UDPv4 is present as defined in
2424          * https://tools.ietf.org/html/rfc7348
2425          */
2426         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2427                 return rte_flow_error_set(error, EINVAL,
2428                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2429                                           "no outer UDP layer found");
2430         if (!mask)
2431                 mask = &rte_flow_item_vxlan_gpe_mask;
2432         ret = mlx5_flow_item_acceptable
2433                 (item, (const uint8_t *)mask,
2434                  (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
2435                  sizeof(struct rte_flow_item_vxlan_gpe),
2436                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2437         if (ret < 0)
2438                 return ret;
2439         if (spec) {
2440                 if (spec->protocol)
2441                         return rte_flow_error_set(error, ENOTSUP,
2442                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2443                                                   item,
2444                                                   "VxLAN-GPE protocol"
2445                                                   " not supported");
2446                 memcpy(&id.vni[1], spec->vni, 3);
2447                 memcpy(&id.vni[1], mask->vni, 3);
2448         }
2449         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2450                 return rte_flow_error_set(error, ENOTSUP,
2451                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2452                                           "VXLAN-GPE tunnel must be fully"
2453                                           " defined");
2454         return 0;
2455 }
2456 /**
2457  * Validate GRE Key item.
2458  *
2459  * @param[in] item
2460  *   Item specification.
2461  * @param[in] item_flags
2462  *   Bit flags to mark detected items.
2463  * @param[in] gre_item
2464  *   Pointer to gre_item
2465  * @param[out] error
2466  *   Pointer to error structure.
2467  *
2468  * @return
2469  *   0 on success, a negative errno value otherwise and rte_errno is set.
2470  */
2471 int
2472 mlx5_flow_validate_item_gre_key(const struct rte_flow_item *item,
2473                                 uint64_t item_flags,
2474                                 const struct rte_flow_item *gre_item,
2475                                 struct rte_flow_error *error)
2476 {
2477         const rte_be32_t *mask = item->mask;
2478         int ret = 0;
2479         rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
2480         const struct rte_flow_item_gre *gre_spec;
2481         const struct rte_flow_item_gre *gre_mask;
2482
2483         if (item_flags & MLX5_FLOW_LAYER_GRE_KEY)
2484                 return rte_flow_error_set(error, ENOTSUP,
2485                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2486                                           "Multiple GRE key not support");
2487         if (!(item_flags & MLX5_FLOW_LAYER_GRE))
2488                 return rte_flow_error_set(error, ENOTSUP,
2489                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2490                                           "No preceding GRE header");
2491         if (item_flags & MLX5_FLOW_LAYER_INNER)
2492                 return rte_flow_error_set(error, ENOTSUP,
2493                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2494                                           "GRE key following a wrong item");
2495         gre_mask = gre_item->mask;
2496         if (!gre_mask)
2497                 gre_mask = &rte_flow_item_gre_mask;
2498         gre_spec = gre_item->spec;
2499         if (gre_spec && (gre_mask->c_rsvd0_ver & RTE_BE16(0x2000)) &&
2500                          !(gre_spec->c_rsvd0_ver & RTE_BE16(0x2000)))
2501                 return rte_flow_error_set(error, EINVAL,
2502                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2503                                           "Key bit must be on");
2504
2505         if (!mask)
2506                 mask = &gre_key_default_mask;
2507         ret = mlx5_flow_item_acceptable
2508                 (item, (const uint8_t *)mask,
2509                  (const uint8_t *)&gre_key_default_mask,
2510                  sizeof(rte_be32_t), MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2511         return ret;
2512 }
2513
2514 /**
2515  * Validate GRE item.
2516  *
2517  * @param[in] item
2518  *   Item specification.
2519  * @param[in] item_flags
2520  *   Bit flags to mark detected items.
2521  * @param[in] target_protocol
2522  *   The next protocol in the previous item.
2523  * @param[out] error
2524  *   Pointer to error structure.
2525  *
2526  * @return
2527  *   0 on success, a negative errno value otherwise and rte_errno is set.
2528  */
2529 int
2530 mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
2531                             uint64_t item_flags,
2532                             uint8_t target_protocol,
2533                             struct rte_flow_error *error)
2534 {
2535         const struct rte_flow_item_gre *spec __rte_unused = item->spec;
2536         const struct rte_flow_item_gre *mask = item->mask;
2537         int ret;
2538         const struct rte_flow_item_gre nic_mask = {
2539                 .c_rsvd0_ver = RTE_BE16(0xB000),
2540                 .protocol = RTE_BE16(UINT16_MAX),
2541         };
2542
2543         if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2544                 return rte_flow_error_set(error, EINVAL,
2545                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2546                                           "protocol filtering not compatible"
2547                                           " with this GRE layer");
2548         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2549                 return rte_flow_error_set(error, ENOTSUP,
2550                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2551                                           "multiple tunnel layers not"
2552                                           " supported");
2553         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2554                 return rte_flow_error_set(error, ENOTSUP,
2555                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2556                                           "L3 Layer is missing");
2557         if (!mask)
2558                 mask = &rte_flow_item_gre_mask;
2559         ret = mlx5_flow_item_acceptable
2560                 (item, (const uint8_t *)mask,
2561                  (const uint8_t *)&nic_mask,
2562                  sizeof(struct rte_flow_item_gre), MLX5_ITEM_RANGE_NOT_ACCEPTED,
2563                  error);
2564         if (ret < 0)
2565                 return ret;
2566 #ifndef HAVE_MLX5DV_DR
2567 #ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
2568         if (spec && (spec->protocol & mask->protocol))
2569                 return rte_flow_error_set(error, ENOTSUP,
2570                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2571                                           "without MPLS support the"
2572                                           " specification cannot be used for"
2573                                           " filtering");
2574 #endif
2575 #endif
2576         return 0;
2577 }
2578
2579 /**
2580  * Validate Geneve item.
2581  *
2582  * @param[in] item
2583  *   Item specification.
2584  * @param[in] itemFlags
2585  *   Bit-fields that holds the items detected until now.
2586  * @param[in] enPriv
2587  *   Pointer to the private data structure.
2588  * @param[out] error
2589  *   Pointer to error structure.
2590  *
2591  * @return
2592  *   0 on success, a negative errno value otherwise and rte_errno is set.
2593  */
2594
2595 int
2596 mlx5_flow_validate_item_geneve(const struct rte_flow_item *item,
2597                                uint64_t item_flags,
2598                                struct rte_eth_dev *dev,
2599                                struct rte_flow_error *error)
2600 {
2601         struct mlx5_priv *priv = dev->data->dev_private;
2602         const struct rte_flow_item_geneve *spec = item->spec;
2603         const struct rte_flow_item_geneve *mask = item->mask;
2604         int ret;
2605         uint16_t gbhdr;
2606         uint8_t opt_len = priv->config.hca_attr.geneve_max_opt_len ?
2607                           MLX5_GENEVE_OPT_LEN_1 : MLX5_GENEVE_OPT_LEN_0;
2608         const struct rte_flow_item_geneve nic_mask = {
2609                 .ver_opt_len_o_c_rsvd0 = RTE_BE16(0x3f80),
2610                 .vni = "\xff\xff\xff",
2611                 .protocol = RTE_BE16(UINT16_MAX),
2612         };
2613
2614         if (!priv->config.hca_attr.tunnel_stateless_geneve_rx)
2615                 return rte_flow_error_set(error, ENOTSUP,
2616                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2617                                           "L3 Geneve is not enabled by device"
2618                                           " parameter and/or not configured in"
2619                                           " firmware");
2620         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2621                 return rte_flow_error_set(error, ENOTSUP,
2622                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2623                                           "multiple tunnel layers not"
2624                                           " supported");
2625         /*
2626          * Verify only UDPv4 is present as defined in
2627          * https://tools.ietf.org/html/rfc7348
2628          */
2629         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
2630                 return rte_flow_error_set(error, EINVAL,
2631                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2632                                           "no outer UDP layer found");
2633         if (!mask)
2634                 mask = &rte_flow_item_geneve_mask;
2635         ret = mlx5_flow_item_acceptable
2636                                   (item, (const uint8_t *)mask,
2637                                    (const uint8_t *)&nic_mask,
2638                                    sizeof(struct rte_flow_item_geneve),
2639                                    MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2640         if (ret)
2641                 return ret;
2642         if (spec) {
2643                 gbhdr = rte_be_to_cpu_16(spec->ver_opt_len_o_c_rsvd0);
2644                 if (MLX5_GENEVE_VER_VAL(gbhdr) ||
2645                      MLX5_GENEVE_CRITO_VAL(gbhdr) ||
2646                      MLX5_GENEVE_RSVD_VAL(gbhdr) || spec->rsvd1)
2647                         return rte_flow_error_set(error, ENOTSUP,
2648                                                   RTE_FLOW_ERROR_TYPE_ITEM,
2649                                                   item,
2650                                                   "Geneve protocol unsupported"
2651                                                   " fields are being used");
2652                 if (MLX5_GENEVE_OPTLEN_VAL(gbhdr) > opt_len)
2653                         return rte_flow_error_set
2654                                         (error, ENOTSUP,
2655                                          RTE_FLOW_ERROR_TYPE_ITEM,
2656                                          item,
2657                                          "Unsupported Geneve options length");
2658         }
2659         if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
2660                 return rte_flow_error_set
2661                                     (error, ENOTSUP,
2662                                      RTE_FLOW_ERROR_TYPE_ITEM, item,
2663                                      "Geneve tunnel must be fully defined");
2664         return 0;
2665 }
2666
2667 /**
2668  * Validate Geneve TLV option item.
2669  *
2670  * @param[in] item
2671  *   Item specification.
2672  * @param[in] last_item
2673  *   Previous validated item in the pattern items.
2674  * @param[in] geneve_item
2675  *   Previous GENEVE item specification.
2676  * @param[in] dev
2677  *   Pointer to the rte_eth_dev structure.
2678  * @param[out] error
2679  *   Pointer to error structure.
2680  *
2681  * @return
2682  *   0 on success, a negative errno value otherwise and rte_errno is set.
2683  */
2684 int
2685 mlx5_flow_validate_item_geneve_opt(const struct rte_flow_item *item,
2686                                    uint64_t last_item,
2687                                    const struct rte_flow_item *geneve_item,
2688                                    struct rte_eth_dev *dev,
2689                                    struct rte_flow_error *error)
2690 {
2691         struct mlx5_priv *priv = dev->data->dev_private;
2692         struct mlx5_dev_ctx_shared *sh = priv->sh;
2693         struct mlx5_geneve_tlv_option_resource *geneve_opt_resource;
2694         struct mlx5_hca_attr *hca_attr = &priv->config.hca_attr;
2695         uint8_t data_max_supported =
2696                         hca_attr->max_geneve_tlv_option_data_len * 4;
2697         struct mlx5_dev_config *config = &priv->config;
2698         const struct rte_flow_item_geneve *geneve_spec;
2699         const struct rte_flow_item_geneve *geneve_mask;
2700         const struct rte_flow_item_geneve_opt *spec = item->spec;
2701         const struct rte_flow_item_geneve_opt *mask = item->mask;
2702         unsigned int i;
2703         unsigned int data_len;
2704         uint8_t tlv_option_len;
2705         uint16_t optlen_m, optlen_v;
2706         const struct rte_flow_item_geneve_opt full_mask = {
2707                 .option_class = RTE_BE16(0xffff),
2708                 .option_type = 0xff,
2709                 .option_len = 0x1f,
2710         };
2711
2712         if (!mask)
2713                 mask = &rte_flow_item_geneve_opt_mask;
2714         if (!spec)
2715                 return rte_flow_error_set
2716                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2717                         "Geneve TLV opt class/type/length must be specified");
2718         if ((uint32_t)spec->option_len > MLX5_GENEVE_OPTLEN_MASK)
2719                 return rte_flow_error_set
2720                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2721                         "Geneve TLV opt length exceeeds the limit (31)");
2722         /* Check if class type and length masks are full. */
2723         if (full_mask.option_class != mask->option_class ||
2724             full_mask.option_type != mask->option_type ||
2725             full_mask.option_len != (mask->option_len & full_mask.option_len))
2726                 return rte_flow_error_set
2727                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2728                         "Geneve TLV opt class/type/length masks must be full");
2729         /* Check if length is supported */
2730         if ((uint32_t)spec->option_len >
2731                         config->hca_attr.max_geneve_tlv_option_data_len)
2732                 return rte_flow_error_set
2733                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2734                         "Geneve TLV opt length not supported");
2735         if (config->hca_attr.max_geneve_tlv_options > 1)
2736                 DRV_LOG(DEBUG,
2737                         "max_geneve_tlv_options supports more than 1 option");
2738         /* Check GENEVE item preceding. */
2739         if (!geneve_item || !(last_item & MLX5_FLOW_LAYER_GENEVE))
2740                 return rte_flow_error_set
2741                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2742                         "Geneve opt item must be preceded with Geneve item");
2743         geneve_spec = geneve_item->spec;
2744         geneve_mask = geneve_item->mask ? geneve_item->mask :
2745                                           &rte_flow_item_geneve_mask;
2746         /* Check if GENEVE TLV option size doesn't exceed option length */
2747         if (geneve_spec && (geneve_mask->ver_opt_len_o_c_rsvd0 ||
2748                             geneve_spec->ver_opt_len_o_c_rsvd0)) {
2749                 tlv_option_len = spec->option_len & mask->option_len;
2750                 optlen_v = rte_be_to_cpu_16(geneve_spec->ver_opt_len_o_c_rsvd0);
2751                 optlen_v = MLX5_GENEVE_OPTLEN_VAL(optlen_v);
2752                 optlen_m = rte_be_to_cpu_16(geneve_mask->ver_opt_len_o_c_rsvd0);
2753                 optlen_m = MLX5_GENEVE_OPTLEN_VAL(optlen_m);
2754                 if ((optlen_v & optlen_m) <= tlv_option_len)
2755                         return rte_flow_error_set
2756                                 (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2757                                  "GENEVE TLV option length exceeds optlen");
2758         }
2759         /* Check if length is 0 or data is 0. */
2760         if (spec->data == NULL || spec->option_len == 0)
2761                 return rte_flow_error_set
2762                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2763                         "Geneve TLV opt with zero data/length not supported");
2764         /* Check not all data & mask are 0. */
2765         data_len = spec->option_len * 4;
2766         if (mask->data == NULL) {
2767                 for (i = 0; i < data_len; i++)
2768                         if (spec->data[i])
2769                                 break;
2770                 if (i == data_len)
2771                         return rte_flow_error_set(error, ENOTSUP,
2772                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2773                                 "Can't match on Geneve option data 0");
2774         } else {
2775                 for (i = 0; i < data_len; i++)
2776                         if (spec->data[i] & mask->data[i])
2777                                 break;
2778                 if (i == data_len)
2779                         return rte_flow_error_set(error, ENOTSUP,
2780                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2781                                 "Can't match on Geneve option data and mask 0");
2782                 /* Check data mask supported. */
2783                 for (i = data_max_supported; i < data_len ; i++)
2784                         if (mask->data[i])
2785                                 return rte_flow_error_set(error, ENOTSUP,
2786                                         RTE_FLOW_ERROR_TYPE_ITEM, item,
2787                                         "Data mask is of unsupported size");
2788         }
2789         /* Check GENEVE option is supported in NIC. */
2790         if (!config->hca_attr.geneve_tlv_opt)
2791                 return rte_flow_error_set
2792                         (error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
2793                         "Geneve TLV opt not supported");
2794         /* Check if we already have geneve option with different type/class. */
2795         rte_spinlock_lock(&sh->geneve_tlv_opt_sl);
2796         geneve_opt_resource = sh->geneve_tlv_option_resource;
2797         if (geneve_opt_resource != NULL)
2798                 if (geneve_opt_resource->option_class != spec->option_class ||
2799                     geneve_opt_resource->option_type != spec->option_type ||
2800                     geneve_opt_resource->length != spec->option_len) {
2801                         rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
2802                         return rte_flow_error_set(error, ENOTSUP,
2803                                 RTE_FLOW_ERROR_TYPE_ITEM, item,
2804                                 "Only one Geneve TLV option supported");
2805                 }
2806         rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
2807         return 0;
2808 }
2809
2810 /**
2811  * Validate MPLS item.
2812  *
2813  * @param[in] dev
2814  *   Pointer to the rte_eth_dev structure.
2815  * @param[in] item
2816  *   Item specification.
2817  * @param[in] item_flags
2818  *   Bit-fields that holds the items detected until now.
2819  * @param[in] prev_layer
2820  *   The protocol layer indicated in previous item.
2821  * @param[out] error
2822  *   Pointer to error structure.
2823  *
2824  * @return
2825  *   0 on success, a negative errno value otherwise and rte_errno is set.
2826  */
2827 int
2828 mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
2829                              const struct rte_flow_item *item __rte_unused,
2830                              uint64_t item_flags __rte_unused,
2831                              uint64_t prev_layer __rte_unused,
2832                              struct rte_flow_error *error)
2833 {
2834 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
2835         const struct rte_flow_item_mpls *mask = item->mask;
2836         struct mlx5_priv *priv = dev->data->dev_private;
2837         int ret;
2838
2839         if (!priv->config.mpls_en)
2840                 return rte_flow_error_set(error, ENOTSUP,
2841                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2842                                           "MPLS not supported or"
2843                                           " disabled in firmware"
2844                                           " configuration.");
2845         /* MPLS over IP, UDP, GRE is allowed */
2846         if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
2847                             MLX5_FLOW_LAYER_OUTER_L4_UDP |
2848                             MLX5_FLOW_LAYER_GRE |
2849                             MLX5_FLOW_LAYER_GRE_KEY)))
2850                 return rte_flow_error_set(error, EINVAL,
2851                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2852                                           "protocol filtering not compatible"
2853                                           " with MPLS layer");
2854         /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
2855         if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
2856             !(item_flags & MLX5_FLOW_LAYER_GRE))
2857                 return rte_flow_error_set(error, ENOTSUP,
2858                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2859                                           "multiple tunnel layers not"
2860                                           " supported");
2861         if (!mask)
2862                 mask = &rte_flow_item_mpls_mask;
2863         ret = mlx5_flow_item_acceptable
2864                 (item, (const uint8_t *)mask,
2865                  (const uint8_t *)&rte_flow_item_mpls_mask,
2866                  sizeof(struct rte_flow_item_mpls),
2867                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2868         if (ret < 0)
2869                 return ret;
2870         return 0;
2871 #else
2872         return rte_flow_error_set(error, ENOTSUP,
2873                                   RTE_FLOW_ERROR_TYPE_ITEM, item,
2874                                   "MPLS is not supported by Verbs, please"
2875                                   " update.");
2876 #endif
2877 }
2878
2879 /**
2880  * Validate NVGRE item.
2881  *
2882  * @param[in] item
2883  *   Item specification.
2884  * @param[in] item_flags
2885  *   Bit flags to mark detected items.
2886  * @param[in] target_protocol
2887  *   The next protocol in the previous item.
2888  * @param[out] error
2889  *   Pointer to error structure.
2890  *
2891  * @return
2892  *   0 on success, a negative errno value otherwise and rte_errno is set.
2893  */
2894 int
2895 mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
2896                               uint64_t item_flags,
2897                               uint8_t target_protocol,
2898                               struct rte_flow_error *error)
2899 {
2900         const struct rte_flow_item_nvgre *mask = item->mask;
2901         int ret;
2902
2903         if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
2904                 return rte_flow_error_set(error, EINVAL,
2905                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2906                                           "protocol filtering not compatible"
2907                                           " with this GRE layer");
2908         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2909                 return rte_flow_error_set(error, ENOTSUP,
2910                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2911                                           "multiple tunnel layers not"
2912                                           " supported");
2913         if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
2914                 return rte_flow_error_set(error, ENOTSUP,
2915                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2916                                           "L3 Layer is missing");
2917         if (!mask)
2918                 mask = &rte_flow_item_nvgre_mask;
2919         ret = mlx5_flow_item_acceptable
2920                 (item, (const uint8_t *)mask,
2921                  (const uint8_t *)&rte_flow_item_nvgre_mask,
2922                  sizeof(struct rte_flow_item_nvgre),
2923                  MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
2924         if (ret < 0)
2925                 return ret;
2926         return 0;
2927 }
2928
2929 /**
2930  * Validate eCPRI item.
2931  *
2932  * @param[in] item
2933  *   Item specification.
2934  * @param[in] item_flags
2935  *   Bit-fields that holds the items detected until now.
2936  * @param[in] last_item
2937  *   Previous validated item in the pattern items.
2938  * @param[in] ether_type
2939  *   Type in the ethernet layer header (including dot1q).
2940  * @param[in] acc_mask
2941  *   Acceptable mask, if NULL default internal default mask
2942  *   will be used to check whether item fields are supported.
2943  * @param[out] error
2944  *   Pointer to error structure.
2945  *
2946  * @return
2947  *   0 on success, a negative errno value otherwise and rte_errno is set.
2948  */
2949 int
2950 mlx5_flow_validate_item_ecpri(const struct rte_flow_item *item,
2951                               uint64_t item_flags,
2952                               uint64_t last_item,
2953                               uint16_t ether_type,
2954                               const struct rte_flow_item_ecpri *acc_mask,
2955                               struct rte_flow_error *error)
2956 {
2957         const struct rte_flow_item_ecpri *mask = item->mask;
2958         const struct rte_flow_item_ecpri nic_mask = {
2959                 .hdr = {
2960                         .common = {
2961                                 .u32 =
2962                                 RTE_BE32(((const struct rte_ecpri_common_hdr) {
2963                                         .type = 0xFF,
2964                                         }).u32),
2965                         },
2966                         .dummy[0] = 0xFFFFFFFF,
2967                 },
2968         };
2969         const uint64_t outer_l2_vlan = (MLX5_FLOW_LAYER_OUTER_L2 |
2970                                         MLX5_FLOW_LAYER_OUTER_VLAN);
2971         struct rte_flow_item_ecpri mask_lo;
2972
2973         if (!(last_item & outer_l2_vlan) &&
2974             last_item != MLX5_FLOW_LAYER_OUTER_L4_UDP)
2975                 return rte_flow_error_set(error, EINVAL,
2976                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2977                                           "eCPRI can only follow L2/VLAN layer or UDP layer");
2978         if ((last_item & outer_l2_vlan) && ether_type &&
2979             ether_type != RTE_ETHER_TYPE_ECPRI)
2980                 return rte_flow_error_set(error, EINVAL,
2981                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2982                                           "eCPRI cannot follow L2/VLAN layer which ether type is not 0xAEFE");
2983         if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
2984                 return rte_flow_error_set(error, EINVAL,
2985                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2986                                           "eCPRI with tunnel is not supported right now");
2987         if (item_flags & MLX5_FLOW_LAYER_OUTER_L3)
2988                 return rte_flow_error_set(error, ENOTSUP,
2989                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2990                                           "multiple L3 layers not supported");
2991         else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP)
2992                 return rte_flow_error_set(error, EINVAL,
2993                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2994                                           "eCPRI cannot coexist with a TCP layer");
2995         /* In specification, eCPRI could be over UDP layer. */
2996         else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP)
2997                 return rte_flow_error_set(error, EINVAL,
2998                                           RTE_FLOW_ERROR_TYPE_ITEM, item,
2999                                           "eCPRI over UDP layer is not yet supported right now");
3000         /* Mask for type field in common header could be zero. */
3001         if (!mask)
3002                 mask = &rte_flow_item_ecpri_mask;
3003         mask_lo.hdr.common.u32 = rte_be_to_cpu_32(mask->hdr.common.u32);
3004         /* Input mask is in big-endian format. */
3005         if (mask_lo.hdr.common.type != 0 && mask_lo.hdr.common.type != 0xff)
3006                 return rte_flow_error_set(error, EINVAL,
3007                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
3008                                           "partial mask is not supported for protocol");
3009         else if (mask_lo.hdr.common.type == 0 && mask->hdr.dummy[0] != 0)
3010                 return rte_flow_error_set(error, EINVAL,
3011                                           RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
3012                                           "message header mask must be after a type mask");
3013         return mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
3014                                          acc_mask ? (const uint8_t *)acc_mask
3015                                                   : (const uint8_t *)&nic_mask,
3016                                          sizeof(struct rte_flow_item_ecpri),
3017                                          MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
3018 }
3019
3020 /**
3021  * Release resource related QUEUE/RSS action split.
3022  *
3023  * @param dev
3024  *   Pointer to Ethernet device.
3025  * @param flow
3026  *   Flow to release id's from.
3027  */
3028 static void
3029 flow_mreg_split_qrss_release(struct rte_eth_dev *dev,
3030                              struct rte_flow *flow)
3031 {
3032         struct mlx5_priv *priv = dev->data->dev_private;
3033         uint32_t handle_idx;
3034         struct mlx5_flow_handle *dev_handle;
3035
3036         SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
3037                        handle_idx, dev_handle, next)
3038                 if (dev_handle->split_flow_id)
3039                         mlx5_ipool_free(priv->sh->ipool
3040                                         [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
3041                                         dev_handle->split_flow_id);
3042 }
3043
3044 static int
3045 flow_null_validate(struct rte_eth_dev *dev __rte_unused,
3046                    const struct rte_flow_attr *attr __rte_unused,
3047                    const struct rte_flow_item items[] __rte_unused,
3048                    const struct rte_flow_action actions[] __rte_unused,
3049                    bool external __rte_unused,
3050                    int hairpin __rte_unused,
3051                    struct rte_flow_error *error)
3052 {
3053         return rte_flow_error_set(error, ENOTSUP,
3054                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3055 }
3056
3057 static struct mlx5_flow *
3058 flow_null_prepare(struct rte_eth_dev *dev __rte_unused,
3059                   const struct rte_flow_attr *attr __rte_unused,
3060                   const struct rte_flow_item items[] __rte_unused,
3061                   const struct rte_flow_action actions[] __rte_unused,
3062                   struct rte_flow_error *error)
3063 {
3064         rte_flow_error_set(error, ENOTSUP,
3065                            RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3066         return NULL;
3067 }
3068
3069 static int
3070 flow_null_translate(struct rte_eth_dev *dev __rte_unused,
3071                     struct mlx5_flow *dev_flow __rte_unused,
3072                     const struct rte_flow_attr *attr __rte_unused,
3073                     const struct rte_flow_item items[] __rte_unused,
3074                     const struct rte_flow_action actions[] __rte_unused,
3075                     struct rte_flow_error *error)
3076 {
3077         return rte_flow_error_set(error, ENOTSUP,
3078                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3079 }
3080
3081 static int
3082 flow_null_apply(struct rte_eth_dev *dev __rte_unused,
3083                 struct rte_flow *flow __rte_unused,
3084                 struct rte_flow_error *error)
3085 {
3086         return rte_flow_error_set(error, ENOTSUP,
3087                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3088 }
3089
3090 static void
3091 flow_null_remove(struct rte_eth_dev *dev __rte_unused,
3092                  struct rte_flow *flow __rte_unused)
3093 {
3094 }
3095
3096 static void
3097 flow_null_destroy(struct rte_eth_dev *dev __rte_unused,
3098                   struct rte_flow *flow __rte_unused)
3099 {
3100 }
3101
3102 static int
3103 flow_null_query(struct rte_eth_dev *dev __rte_unused,
3104                 struct rte_flow *flow __rte_unused,
3105                 const struct rte_flow_action *actions __rte_unused,
3106                 void *data __rte_unused,
3107                 struct rte_flow_error *error)
3108 {
3109         return rte_flow_error_set(error, ENOTSUP,
3110                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
3111 }
3112
3113 static int
3114 flow_null_sync_domain(struct rte_eth_dev *dev __rte_unused,
3115                       uint32_t domains __rte_unused,
3116                       uint32_t flags __rte_unused)
3117 {
3118         return 0;
3119 }
3120
3121 /* Void driver to protect from null pointer reference. */
3122 const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
3123         .validate = flow_null_validate,
3124         .prepare = flow_null_prepare,
3125         .translate = flow_null_translate,
3126         .apply = flow_null_apply,
3127         .remove = flow_null_remove,
3128         .destroy = flow_null_destroy,
3129         .query = flow_null_query,
3130         .sync_domain = flow_null_sync_domain,
3131 };
3132
3133 /**
3134  * Select flow driver type according to flow attributes and device
3135  * configuration.
3136  *
3137  * @param[in] dev
3138  *   Pointer to the dev structure.
3139  * @param[in] attr
3140  *   Pointer to the flow attributes.
3141  *
3142  * @return
3143  *   flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
3144  */
3145 static enum mlx5_flow_drv_type
3146 flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
3147 {
3148         struct mlx5_priv *priv = dev->data->dev_private;
3149         /* The OS can determine first a specific flow type (DV, VERBS) */
3150         enum mlx5_flow_drv_type type = mlx5_flow_os_get_type();
3151
3152         if (type != MLX5_FLOW_TYPE_MAX)
3153                 return type;
3154         /* If no OS specific type - continue with DV/VERBS selection */
3155         if (attr->transfer && priv->config.dv_esw_en)
3156                 type = MLX5_FLOW_TYPE_DV;
3157         if (!attr->transfer)
3158                 type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
3159                                                  MLX5_FLOW_TYPE_VERBS;
3160         return type;
3161 }
3162
3163 #define flow_get_drv_ops(type) flow_drv_ops[type]
3164
3165 /**
3166  * Flow driver validation API. This abstracts calling driver specific functions.
3167  * The type of flow driver is determined according to flow attributes.
3168  *
3169  * @param[in] dev
3170  *   Pointer to the dev structure.
3171  * @param[in] attr
3172  *   Pointer to the flow attributes.
3173  * @param[in] items
3174  *   Pointer to the list of items.
3175  * @param[in] actions
3176  *   Pointer to the list of actions.
3177  * @param[in] external
3178  *   This flow rule is created by request external to PMD.
3179  * @param[in] hairpin
3180  *   Number of hairpin TX actions, 0 means classic flow.
3181  * @param[out] error
3182  *   Pointer to the error structure.
3183  *
3184  * @return
3185  *   0 on success, a negative errno value otherwise and rte_errno is set.
3186  */
3187 static inline int
3188 flow_drv_validate(struct rte_eth_dev *dev,
3189                   const struct rte_flow_attr *attr,
3190                   const struct rte_flow_item items[],
3191                   const struct rte_flow_action actions[],
3192                   bool external, int hairpin, struct rte_flow_error *error)
3193 {
3194         const struct mlx5_flow_driver_ops *fops;
3195         enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
3196
3197         fops = flow_get_drv_ops(type);
3198         return fops->validate(dev, attr, items, actions, external,
3199                               hairpin, error);
3200 }
3201
3202 /**
3203  * Flow driver preparation API. This abstracts calling driver specific
3204  * functions. Parent flow (rte_flow) should have driver type (drv_type). It
3205  * calculates the size of memory required for device flow, allocates the memory,
3206  * initializes the device flow and returns the pointer.
3207  *
3208  * @note
3209  *   This function initializes device flow structure such as dv or verbs in
3210  *   struct mlx5_flow. However, it is caller's responsibility to initialize the
3211  *   rest. For example, adding returning device flow to flow->dev_flow list and
3212  *   setting backward reference to the flow should be done out of this function.
3213  *   layers field is not filled either.
3214  *
3215  * @param[in] dev
3216  *   Pointer to the dev structure.
3217  * @param[in] attr
3218  *   Pointer to the flow attributes.
3219  * @param[in] items
3220  *   Pointer to the list of items.
3221  * @param[in] actions
3222  *   Pointer to the list of actions.
3223  * @param[in] flow_idx
3224  *   This memory pool index to the flow.
3225  * @param[out] error
3226  *   Pointer to the error structure.
3227  *
3228  * @return
3229  *   Pointer to device flow on success, otherwise NULL and rte_errno is set.
3230  */
3231 static inline struct mlx5_flow *
3232 flow_drv_prepare(struct rte_eth_dev *dev,
3233                  const struct rte_flow *flow,
3234                  const struct rte_flow_attr *attr,
3235                  const struct rte_flow_item items[],
3236                  const struct rte_flow_action actions[],
3237                  uint32_t flow_idx,
3238                  struct rte_flow_error *error)
3239 {
3240         const struct mlx5_flow_driver_ops *fops;
3241         enum mlx5_flow_drv_type type = flow->drv_type;
3242         struct mlx5_flow *mlx5_flow = NULL;
3243
3244         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3245         fops = flow_get_drv_ops(type);
3246         mlx5_flow = fops->prepare(dev, attr, items, actions, error);
3247         if (mlx5_flow)
3248                 mlx5_flow->flow_idx = flow_idx;
3249         return mlx5_flow;
3250 }
3251
3252 /**
3253  * Flow driver translation API. This abstracts calling driver specific
3254  * functions. Parent flow (rte_flow) should have driver type (drv_type). It
3255  * translates a generic flow into a driver flow. flow_drv_prepare() must
3256  * precede.
3257  *
3258  * @note
3259  *   dev_flow->layers could be filled as a result of parsing during translation
3260  *   if needed by flow_drv_apply(). dev_flow->flow->actions can also be filled
3261  *   if necessary. As a flow can have multiple dev_flows by RSS flow expansion,
3262  *   flow->actions could be overwritten even though all the expanded dev_flows
3263  *   have the same actions.
3264  *
3265  * @param[in] dev
3266  *   Pointer to the rte dev structure.
3267  * @param[in, out] dev_flow
3268  *   Pointer to the mlx5 flow.
3269  * @param[in] attr
3270  *   Pointer to the flow attributes.
3271  * @param[in] items
3272  *   Pointer to the list of items.
3273  * @param[in] actions
3274  *   Pointer to the list of actions.
3275  * @param[out] error
3276  *   Pointer to the error structure.
3277  *
3278  * @return
3279  *   0 on success, a negative errno value otherwise and rte_errno is set.
3280  */
3281 static inline int
3282 flow_drv_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
3283                    const struct rte_flow_attr *attr,
3284                    const struct rte_flow_item items[],
3285                    const struct rte_flow_action actions[],
3286                    struct rte_flow_error *error)
3287 {
3288         const struct mlx5_flow_driver_ops *fops;
3289         enum mlx5_flow_drv_type type = dev_flow->flow->drv_type;
3290
3291         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3292         fops = flow_get_drv_ops(type);
3293         return fops->translate(dev, dev_flow, attr, items, actions, error);
3294 }
3295
3296 /**
3297  * Flow driver apply API. This abstracts calling driver specific functions.
3298  * Parent flow (rte_flow) should have driver type (drv_type). It applies
3299  * translated driver flows on to device. flow_drv_translate() must precede.
3300  *
3301  * @param[in] dev
3302  *   Pointer to Ethernet device structure.
3303  * @param[in, out] flow
3304  *   Pointer to flow structure.
3305  * @param[out] error
3306  *   Pointer to error structure.
3307  *
3308  * @return
3309  *   0 on success, a negative errno value otherwise and rte_errno is set.
3310  */
3311 static inline int
3312 flow_drv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
3313                struct rte_flow_error *error)
3314 {
3315         const struct mlx5_flow_driver_ops *fops;
3316         enum mlx5_flow_drv_type type = flow->drv_type;
3317
3318         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3319         fops = flow_get_drv_ops(type);
3320         return fops->apply(dev, flow, error);
3321 }
3322
3323 /**
3324  * Flow driver destroy API. This abstracts calling driver specific functions.
3325  * Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
3326  * on device and releases resources of the flow.
3327  *
3328  * @param[in] dev
3329  *   Pointer to Ethernet device.
3330  * @param[in, out] flow
3331  *   Pointer to flow structure.
3332  */
3333 static inline void
3334 flow_drv_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
3335 {
3336         const struct mlx5_flow_driver_ops *fops;
3337         enum mlx5_flow_drv_type type = flow->drv_type;
3338
3339         flow_mreg_split_qrss_release(dev, flow);
3340         MLX5_ASSERT(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
3341         fops = flow_get_drv_ops(type);
3342         fops->destroy(dev, flow);
3343 }
3344
3345 /**
3346  * Get RSS action from the action list.
3347  *
3348  * @param[in] actions
3349  *   Pointer to the list of actions.
3350  *
3351  * @return
3352  *   Pointer to the RSS action if exist, else return NULL.
3353  */
3354 static const struct rte_flow_action_rss*
3355 flow_get_rss_action(const struct rte_flow_action actions[])
3356 {
3357         const struct rte_flow_action_rss *rss = NULL;
3358
3359         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3360                 switch (actions->type) {
3361                 case RTE_FLOW_ACTION_TYPE_RSS:
3362                         rss = actions->conf;
3363                         break;
3364                 case RTE_FLOW_ACTION_TYPE_SAMPLE:
3365                 {
3366                         const struct rte_flow_action_sample *sample =
3367                                                                 actions->conf;
3368                         const struct rte_flow_action *act = sample->actions;
3369                         for (; act->type != RTE_FLOW_ACTION_TYPE_END; act++)
3370                                 if (act->type == RTE_FLOW_ACTION_TYPE_RSS)
3371                                         rss = act->conf;
3372                         break;
3373                 }
3374                 default:
3375                         break;
3376                 }
3377         }
3378         return rss;
3379 }
3380
3381 /**
3382  * Get ASO age action by index.
3383  *
3384  * @param[in] dev
3385  *   Pointer to the Ethernet device structure.
3386  * @param[in] age_idx
3387  *   Index to the ASO age action.
3388  *
3389  * @return
3390  *   The specified ASO age action.
3391  */
3392 struct mlx5_aso_age_action*
3393 flow_aso_age_get_by_idx(struct rte_eth_dev *dev, uint32_t age_idx)
3394 {
3395         uint16_t pool_idx = age_idx & UINT16_MAX;
3396         uint16_t offset = (age_idx >> 16) & UINT16_MAX;
3397         struct mlx5_priv *priv = dev->data->dev_private;
3398         struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
3399         struct mlx5_aso_age_pool *pool = mng->pools[pool_idx];
3400
3401         return &pool->actions[offset - 1];
3402 }
3403
3404 /* maps indirect action to translated direct in some actions array */
3405 struct mlx5_translated_action_handle {
3406         struct rte_flow_action_handle *action; /**< Indirect action handle. */
3407         int index; /**< Index in related array of rte_flow_action. */
3408 };
3409
3410 /**
3411  * Translates actions of type RTE_FLOW_ACTION_TYPE_INDIRECT to related
3412  * direct action if translation possible.
3413  * This functionality used to run same execution path for both direct and
3414  * indirect actions on flow create. All necessary preparations for indirect
3415  * action handling should be performed on *handle* actions list returned
3416  * from this call.
3417  *
3418  * @param[in] dev
3419  *   Pointer to Ethernet device.
3420  * @param[in] actions
3421  *   List of actions to translate.
3422  * @param[out] handle
3423  *   List to store translated indirect action object handles.
3424  * @param[in, out] indir_n
3425  *   Size of *handle* array. On return should be updated with number of
3426  *   indirect actions retrieved from the *actions* list.
3427  * @param[out] translated_actions
3428  *   List of actions where all indirect actions were translated to direct
3429  *   if possible. NULL if no translation took place.
3430  * @param[out] error
3431  *   Pointer to the error structure.
3432  *
3433  * @return
3434  *   0 on success, a negative errno value otherwise and rte_errno is set.
3435  */
3436 static int
3437 flow_action_handles_translate(struct rte_eth_dev *dev,
3438                               const struct rte_flow_action actions[],
3439                               struct mlx5_translated_action_handle *handle,
3440                               int *indir_n,
3441                               struct rte_flow_action **translated_actions,
3442                               struct rte_flow_error *error)
3443 {
3444         struct mlx5_priv *priv = dev->data->dev_private;
3445         struct rte_flow_action *translated = NULL;
3446         size_t actions_size;
3447         int n;
3448         int copied_n = 0;
3449         struct mlx5_translated_action_handle *handle_end = NULL;
3450
3451         for (n = 0; actions[n].type != RTE_FLOW_ACTION_TYPE_END; n++) {
3452                 if (actions[n].type != RTE_FLOW_ACTION_TYPE_INDIRECT)
3453                         continue;
3454                 if (copied_n == *indir_n) {
3455                         return rte_flow_error_set
3456                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_NUM,
3457                                  NULL, "too many shared actions");
3458                 }
3459                 rte_memcpy(&handle[copied_n].action, &actions[n].conf,
3460                            sizeof(actions[n].conf));
3461                 handle[copied_n].index = n;
3462                 copied_n++;
3463         }
3464         n++;
3465         *indir_n = copied_n;
3466         if (!copied_n)
3467                 return 0;
3468         actions_size = sizeof(struct rte_flow_action) * n;
3469         translated = mlx5_malloc(MLX5_MEM_ZERO, actions_size, 0, SOCKET_ID_ANY);
3470         if (!translated) {
3471                 rte_errno = ENOMEM;
3472                 return -ENOMEM;
3473         }
3474         memcpy(translated, actions, actions_size);
3475         for (handle_end = handle + copied_n; handle < handle_end; handle++) {
3476                 struct mlx5_shared_action_rss *shared_rss;
3477                 uint32_t act_idx = (uint32_t)(uintptr_t)handle->action;
3478                 uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
3479                 uint32_t idx = act_idx &
3480                                ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
3481
3482                 switch (type) {
3483                 case MLX5_INDIRECT_ACTION_TYPE_RSS:
3484                         shared_rss = mlx5_ipool_get
3485                           (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], idx);
3486                         translated[handle->index].type =
3487                                 RTE_FLOW_ACTION_TYPE_RSS;
3488                         translated[handle->index].conf =
3489                                 &shared_rss->origin;
3490                         break;
3491                 case MLX5_INDIRECT_ACTION_TYPE_AGE:
3492                         if (priv->sh->flow_hit_aso_en) {
3493                                 translated[handle->index].type =
3494                                         (enum rte_flow_action_type)
3495                                         MLX5_RTE_FLOW_ACTION_TYPE_AGE;
3496                                 translated[handle->index].conf =
3497                                                          (void *)(uintptr_t)idx;
3498                                 break;
3499                         }
3500                         /* Fall-through */
3501                 default:
3502                         mlx5_free(translated);
3503                         return rte_flow_error_set
3504                                 (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
3505                                  NULL, "invalid indirect action type");
3506                 }
3507         }
3508         *translated_actions = translated;
3509         return 0;
3510 }
3511
3512 /**
3513  * Get Shared RSS action from the action list.
3514  *
3515  * @param[in] dev
3516  *   Pointer to Ethernet device.
3517  * @param[in] shared
3518  *   Pointer to the list of actions.
3519  * @param[in] shared_n
3520  *   Actions list length.
3521  *
3522  * @return
3523  *   The MLX5 RSS action ID if exists, otherwise return 0.
3524  */
3525 static uint32_t
3526 flow_get_shared_rss_action(struct rte_eth_dev *dev,
3527                            struct mlx5_translated_action_handle *handle,
3528                            int shared_n)
3529 {
3530         struct mlx5_translated_action_handle *handle_end;
3531         struct mlx5_priv *priv = dev->data->dev_private;
3532         struct mlx5_shared_action_rss *shared_rss;
3533
3534
3535         for (handle_end = handle + shared_n; handle < handle_end; handle++) {
3536                 uint32_t act_idx = (uint32_t)(uintptr_t)handle->action;
3537                 uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
3538                 uint32_t idx = act_idx &
3539                                ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
3540                 switch (type) {
3541                 case MLX5_INDIRECT_ACTION_TYPE_RSS:
3542                         shared_rss = mlx5_ipool_get
3543                                 (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
3544                                                                            idx);
3545                         __atomic_add_fetch(&shared_rss->refcnt, 1,
3546                                            __ATOMIC_RELAXED);
3547                         return idx;
3548                 default:
3549                         break;
3550                 }
3551         }
3552         return 0;
3553 }
3554
3555 static unsigned int
3556 find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
3557 {
3558         const struct rte_flow_item *item;
3559         unsigned int has_vlan = 0;
3560
3561         for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
3562                 if (item->type == RTE_FLOW_ITEM_TYPE_VLAN) {
3563                         has_vlan = 1;
3564                         break;
3565                 }
3566         }
3567         if (has_vlan)
3568                 return rss_level < 2 ? MLX5_EXPANSION_ROOT_ETH_VLAN :
3569                                        MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN;
3570         return rss_level < 2 ? MLX5_EXPANSION_ROOT :
3571                                MLX5_EXPANSION_ROOT_OUTER;
3572 }
3573
3574 /**
3575  *  Get layer flags from the prefix flow.
3576  *
3577  *  Some flows may be split to several subflows, the prefix subflow gets the
3578  *  match items and the suffix sub flow gets the actions.
3579  *  Some actions need the user defined match item flags to get the detail for
3580  *  the action.
3581  *  This function helps the suffix flow to get the item layer flags from prefix
3582  *  subflow.
3583  *
3584  * @param[in] dev_flow
3585  *   Pointer the created preifx subflow.
3586  *
3587  * @return
3588  *   The layers get from prefix subflow.
3589  */
3590 static inline uint64_t
3591 flow_get_prefix_layer_flags(struct mlx5_flow *dev_flow)
3592 {
3593         uint64_t layers = 0;
3594
3595         /*
3596          * Layers bits could be localization, but usually the compiler will
3597          * help to do the optimization work for source code.
3598          * If no decap actions, use the layers directly.
3599          */
3600         if (!(dev_flow->act_flags & MLX5_FLOW_ACTION_DECAP))
3601                 return dev_flow->handle->layers;
3602         /* Convert L3 layers with decap action. */
3603         if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV4)
3604                 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
3605         else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV6)
3606                 layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
3607         /* Convert L4 layers with decap action.  */
3608         if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_TCP)
3609                 layers |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
3610         else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_UDP)
3611                 layers |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
3612         return layers;
3613 }
3614
3615 /**
3616  * Get metadata split action information.
3617  *
3618  * @param[in] actions
3619  *   Pointer to the list of actions.
3620  * @param[out] qrss
3621  *   Pointer to the return pointer.
3622  * @param[out] qrss_type
3623  *   Pointer to the action type to return. RTE_FLOW_ACTION_TYPE_END is returned
3624  *   if no QUEUE/RSS is found.
3625  * @param[out] encap_idx
3626  *   Pointer to the index of the encap action if exists, otherwise the last
3627  *   action index.
3628  *
3629  * @return
3630  *   Total number of actions.
3631  */
3632 static int
3633 flow_parse_metadata_split_actions_info(const struct rte_flow_action actions[],
3634                                        const struct rte_flow_action **qrss,
3635                                        int *encap_idx)
3636 {
3637         const struct rte_flow_action_raw_encap *raw_encap;
3638         int actions_n = 0;
3639         int raw_decap_idx = -1;
3640
3641         *encap_idx = -1;
3642         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3643                 switch (actions->type) {
3644                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
3645                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
3646                         *encap_idx = actions_n;
3647                         break;
3648                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
3649                         raw_decap_idx = actions_n;
3650                         break;
3651                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3652                         raw_encap = actions->conf;
3653                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
3654                                 *encap_idx = raw_decap_idx != -1 ?
3655                                                       raw_decap_idx : actions_n;
3656                         break;
3657                 case RTE_FLOW_ACTION_TYPE_QUEUE:
3658                 case RTE_FLOW_ACTION_TYPE_RSS:
3659                         *qrss = actions;
3660                         break;
3661                 default:
3662                         break;
3663                 }
3664                 actions_n++;
3665         }
3666         if (*encap_idx == -1)
3667                 *encap_idx = actions_n;
3668         /* Count RTE_FLOW_ACTION_TYPE_END. */
3669         return actions_n + 1;
3670 }
3671
3672 /**
3673  * Check meter action from the action list.
3674  *
3675  * @param[in] actions
3676  *   Pointer to the list of actions.
3677  * @param[out] mtr
3678  *   Pointer to the meter exist flag.
3679  *
3680  * @return
3681  *   Total number of actions.
3682  */
3683 static int
3684 flow_check_meter_action(const struct rte_flow_action actions[], uint32_t *mtr)
3685 {
3686         int actions_n = 0;
3687
3688         MLX5_ASSERT(mtr);
3689         *mtr = 0;
3690         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3691                 switch (actions->type) {
3692                 case RTE_FLOW_ACTION_TYPE_METER:
3693                         *mtr = 1;
3694                         break;
3695                 default:
3696                         break;
3697                 }
3698                 actions_n++;
3699         }
3700         /* Count RTE_FLOW_ACTION_TYPE_END. */
3701         return actions_n + 1;
3702 }
3703
3704 /**
3705  * Check if the flow should be split due to hairpin.
3706  * The reason for the split is that in current HW we can't
3707  * support encap and push-vlan on Rx, so if a flow contains
3708  * these actions we move it to Tx.
3709  *
3710  * @param dev
3711  *   Pointer to Ethernet device.
3712  * @param[in] attr
3713  *   Flow rule attributes.
3714  * @param[in] actions
3715  *   Associated actions (list terminated by the END action).
3716  *
3717  * @return
3718  *   > 0 the number of actions and the flow should be split,
3719  *   0 when no split required.
3720  */
3721 static int
3722 flow_check_hairpin_split(struct rte_eth_dev *dev,
3723                          const struct rte_flow_attr *attr,
3724                          const struct rte_flow_action actions[])
3725 {
3726         int queue_action = 0;
3727         int action_n = 0;
3728         int split = 0;
3729         const struct rte_flow_action_queue *queue;
3730         const struct rte_flow_action_rss *rss;
3731         const struct rte_flow_action_raw_encap *raw_encap;
3732         const struct rte_eth_hairpin_conf *conf;
3733
3734         if (!attr->ingress)
3735                 return 0;
3736         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
3737                 switch (actions->type) {
3738                 case RTE_FLOW_ACTION_TYPE_QUEUE:
3739                         queue = actions->conf;
3740                         if (queue == NULL)
3741                                 return 0;
3742                         conf = mlx5_rxq_get_hairpin_conf(dev, queue->index);
3743                         if (conf == NULL || conf->tx_explicit != 0)
3744                                 return 0;
3745                         queue_action = 1;
3746                         action_n++;
3747                         break;
3748                 case RTE_FLOW_ACTION_TYPE_RSS:
3749                         rss = actions->conf;
3750                         if (rss == NULL || rss->queue_num == 0)
3751                                 return 0;
3752                         conf = mlx5_rxq_get_hairpin_conf(dev, rss->queue[0]);
3753                         if (conf == NULL || conf->tx_explicit != 0)
3754                                 return 0;
3755                         queue_action = 1;
3756                         action_n++;
3757                         break;
3758                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
3759                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
3760                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
3761                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
3762                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
3763                         split++;
3764                         action_n++;
3765                         break;
3766                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
3767                         raw_encap = actions->conf;
3768                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
3769                                 split++;
3770                         action_n++;
3771                         break;
3772                 default:
3773                         action_n++;
3774                         break;
3775                 }
3776         }
3777         if (split && queue_action)
3778                 return action_n;
3779         return 0;
3780 }
3781
3782 /* Declare flow create/destroy prototype in advance. */
3783 static uint32_t
3784 flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
3785                  const struct rte_flow_attr *attr,
3786                  const struct rte_flow_item items[],
3787                  const struct rte_flow_action actions[],
3788                  bool external, struct rte_flow_error *error);
3789
3790 static void
3791 flow_list_destroy(struct rte_eth_dev *dev, uint32_t *list,
3792                   uint32_t flow_idx);
3793
3794 int
3795 flow_dv_mreg_match_cb(struct mlx5_hlist *list __rte_unused,
3796                       struct mlx5_hlist_entry *entry,
3797                       uint64_t key, void *cb_ctx __rte_unused)
3798 {
3799         struct mlx5_flow_mreg_copy_resource *mcp_res =
3800                 container_of(entry, typeof(*mcp_res), hlist_ent);
3801
3802         return mcp_res->mark_id != key;
3803 }
3804
3805 struct mlx5_hlist_entry *
3806 flow_dv_mreg_create_cb(struct mlx5_hlist *list, uint64_t key,
3807                        void *cb_ctx)
3808 {
3809         struct rte_eth_dev *dev = list->ctx;
3810         struct mlx5_priv *priv = dev->data->dev_private;
3811         struct mlx5_flow_cb_ctx *ctx = cb_ctx;
3812         struct mlx5_flow_mreg_copy_resource *mcp_res;
3813         struct rte_flow_error *error = ctx->error;
3814         uint32_t idx = 0;
3815         int ret;
3816         uint32_t mark_id = key;
3817         struct rte_flow_attr attr = {
3818                 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
3819                 .ingress = 1,
3820         };
3821         struct mlx5_rte_flow_item_tag tag_spec = {
3822                 .data = mark_id,
3823         };
3824         struct rte_flow_item items[] = {
3825                 [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
3826         };
3827         struct rte_flow_action_mark ftag = {
3828                 .id = mark_id,
3829         };
3830         struct mlx5_flow_action_copy_mreg cp_mreg = {
3831                 .dst = REG_B,
3832                 .src = REG_NON,
3833         };
3834         struct rte_flow_action_jump jump = {
3835                 .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
3836         };
3837         struct rte_flow_action actions[] = {
3838                 [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
3839         };
3840
3841         /* Fill the register fileds in the flow. */
3842         ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
3843         if (ret < 0)
3844                 return NULL;
3845         tag_spec.id = ret;
3846         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
3847         if (ret < 0)
3848                 return NULL;
3849         cp_mreg.src = ret;
3850         /* Provide the full width of FLAG specific value. */
3851         if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
3852                 tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
3853         /* Build a new flow. */
3854         if (mark_id != MLX5_DEFAULT_COPY_ID) {
3855                 items[0] = (struct rte_flow_item){
3856                         .type = (enum rte_flow_item_type)
3857                                 MLX5_RTE_FLOW_ITEM_TYPE_TAG,
3858                         .spec = &tag_spec,
3859                 };
3860                 items[1] = (struct rte_flow_item){
3861                         .type = RTE_FLOW_ITEM_TYPE_END,
3862                 };
3863                 actions[0] = (struct rte_flow_action){
3864                         .type = (enum rte_flow_action_type)
3865                                 MLX5_RTE_FLOW_ACTION_TYPE_MARK,
3866                         .conf = &ftag,
3867                 };
3868                 actions[1] = (struct rte_flow_action){
3869                         .type = (enum rte_flow_action_type)
3870                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3871                         .conf = &cp_mreg,
3872                 };
3873                 actions[2] = (struct rte_flow_action){
3874                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
3875                         .conf = &jump,
3876                 };
3877                 actions[3] = (struct rte_flow_action){
3878                         .type = RTE_FLOW_ACTION_TYPE_END,
3879                 };
3880         } else {
3881                 /* Default rule, wildcard match. */
3882                 attr.priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR;
3883                 items[0] = (struct rte_flow_item){
3884                         .type = RTE_FLOW_ITEM_TYPE_END,
3885                 };
3886                 actions[0] = (struct rte_flow_action){
3887                         .type = (enum rte_flow_action_type)
3888                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
3889                         .conf = &cp_mreg,
3890                 };
3891                 actions[1] = (struct rte_flow_action){
3892                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
3893                         .conf = &jump,
3894                 };
3895                 actions[2] = (struct rte_flow_action){
3896                         .type = RTE_FLOW_ACTION_TYPE_END,
3897                 };
3898         }
3899         /* Build a new entry. */
3900         mcp_res = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_MCP], &idx);
3901         if (!mcp_res) {
3902                 rte_errno = ENOMEM;
3903                 return NULL;
3904         }
3905         mcp_res->idx = idx;
3906         mcp_res->mark_id = mark_id;
3907         /*
3908          * The copy Flows are not included in any list. There
3909          * ones are referenced from other Flows and can not
3910          * be applied, removed, deleted in ardbitrary order
3911          * by list traversing.
3912          */
3913         mcp_res->rix_flow = flow_list_create(dev, NULL, &attr, items,
3914                                          actions, false, error);
3915         if (!mcp_res->rix_flow) {
3916                 mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], idx);
3917                 return NULL;
3918         }
3919         return &mcp_res->hlist_ent;
3920 }
3921
3922 /**
3923  * Add a flow of copying flow metadata registers in RX_CP_TBL.
3924  *
3925  * As mark_id is unique, if there's already a registered flow for the mark_id,
3926  * return by increasing the reference counter of the resource. Otherwise, create
3927  * the resource (mcp_res) and flow.
3928  *
3929  * Flow looks like,
3930  *   - If ingress port is ANY and reg_c[1] is mark_id,
3931  *     flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
3932  *
3933  * For default flow (zero mark_id), flow is like,
3934  *   - If ingress port is ANY,
3935  *     reg_b := reg_c[0] and jump to RX_ACT_TBL.
3936  *
3937  * @param dev
3938  *   Pointer to Ethernet device.
3939  * @param mark_id
3940  *   ID of MARK action, zero means default flow for META.
3941  * @param[out] error
3942  *   Perform verbose error reporting if not NULL.
3943  *
3944  * @return
3945  *   Associated resource on success, NULL otherwise and rte_errno is set.
3946  */
3947 static struct mlx5_flow_mreg_copy_resource *
3948 flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
3949                           struct rte_flow_error *error)
3950 {
3951         struct mlx5_priv *priv = dev->data->dev_private;
3952         struct mlx5_hlist_entry *entry;
3953         struct mlx5_flow_cb_ctx ctx = {
3954                 .dev = dev,
3955                 .error = error,
3956         };
3957
3958         /* Check if already registered. */
3959         MLX5_ASSERT(priv->mreg_cp_tbl);
3960         entry = mlx5_hlist_register(priv->mreg_cp_tbl, mark_id, &ctx);
3961         if (!entry)
3962                 return NULL;
3963         return container_of(entry, struct mlx5_flow_mreg_copy_resource,
3964                             hlist_ent);
3965 }
3966
3967 void
3968 flow_dv_mreg_remove_cb(struct mlx5_hlist *list, struct mlx5_hlist_entry *entry)
3969 {
3970         struct mlx5_flow_mreg_copy_resource *mcp_res =
3971                 container_of(entry, typeof(*mcp_res), hlist_ent);
3972         struct rte_eth_dev *dev = list->ctx;
3973         struct mlx5_priv *priv = dev->data->dev_private;
3974
3975         MLX5_ASSERT(mcp_res->rix_flow);
3976         flow_list_destroy(dev, NULL, mcp_res->rix_flow);
3977         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], mcp_res->idx);
3978 }
3979
3980 /**
3981  * Release flow in RX_CP_TBL.
3982  *
3983  * @param dev
3984  *   Pointer to Ethernet device.
3985  * @flow
3986  *   Parent flow for wich copying is provided.
3987  */
3988 static void
3989 flow_mreg_del_copy_action(struct rte_eth_dev *dev,
3990                           struct rte_flow *flow)
3991 {
3992         struct mlx5_flow_mreg_copy_resource *mcp_res;
3993         struct mlx5_priv *priv = dev->data->dev_private;
3994
3995         if (!flow->rix_mreg_copy)
3996                 return;
3997         mcp_res = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MCP],
3998                                  flow->rix_mreg_copy);
3999         if (!mcp_res || !priv->mreg_cp_tbl)
4000                 return;
4001         MLX5_ASSERT(mcp_res->rix_flow);
4002         mlx5_hlist_unregister(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
4003         flow->rix_mreg_copy = 0;
4004 }
4005
4006 /**
4007  * Remove the default copy action from RX_CP_TBL.
4008  *
4009  * This functions is called in the mlx5_dev_start(). No thread safe
4010  * is guaranteed.
4011  *
4012  * @param dev
4013  *   Pointer to Ethernet device.
4014  */
4015 static void
4016 flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
4017 {
4018         struct mlx5_hlist_entry *entry;
4019         struct mlx5_priv *priv = dev->data->dev_private;
4020
4021         /* Check if default flow is registered. */
4022         if (!priv->mreg_cp_tbl)
4023                 return;
4024         entry = mlx5_hlist_lookup(priv->mreg_cp_tbl,
4025                                   MLX5_DEFAULT_COPY_ID, NULL);
4026         if (!entry)
4027                 return;
4028         mlx5_hlist_unregister(priv->mreg_cp_tbl, entry);
4029 }
4030
4031 /**
4032  * Add the default copy action in in RX_CP_TBL.
4033  *
4034  * This functions is called in the mlx5_dev_start(). No thread safe
4035  * is guaranteed.
4036  *
4037  * @param dev
4038  *   Pointer to Ethernet device.
4039  * @param[out] error
4040  *   Perform verbose error reporting if not NULL.
4041  *
4042  * @return
4043  *   0 for success, negative value otherwise and rte_errno is set.
4044  */
4045 static int
4046 flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
4047                                   struct rte_flow_error *error)
4048 {
4049         struct mlx5_priv *priv = dev->data->dev_private;
4050         struct mlx5_flow_mreg_copy_resource *mcp_res;
4051
4052         /* Check whether extensive metadata feature is engaged. */
4053         if (!priv->config.dv_flow_en ||
4054             priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
4055             !mlx5_flow_ext_mreg_supported(dev) ||
4056             !priv->sh->dv_regc0_mask)
4057                 return 0;
4058         /*
4059          * Add default mreg copy flow may be called multiple time, but
4060          * only be called once in stop. Avoid register it twice.
4061          */
4062         if (mlx5_hlist_lookup(priv->mreg_cp_tbl, MLX5_DEFAULT_COPY_ID, NULL))
4063                 return 0;
4064         mcp_res = flow_mreg_add_copy_action(dev, MLX5_DEFAULT_COPY_ID, error);
4065         if (!mcp_res)
4066                 return -rte_errno;
4067         return 0;
4068 }
4069
4070 /**
4071  * Add a flow of copying flow metadata registers in RX_CP_TBL.
4072  *
4073  * All the flow having Q/RSS action should be split by
4074  * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
4075  * performs the following,
4076  *   - CQE->flow_tag := reg_c[1] (MARK)
4077  *   - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
4078  * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
4079  * but there should be a flow per each MARK ID set by MARK action.
4080  *
4081  * For the aforementioned reason, if there's a MARK action in flow's action
4082  * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
4083  * the MARK ID to CQE's flow_tag like,
4084  *   - If reg_c[1] is mark_id,
4085  *     flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
4086  *
4087  * For SET_META action which stores value in reg_c[0], as the destination is
4088  * also a flow metadata register (reg_b), adding a default flow is enough. Zero
4089  * MARK ID means the default flow. The default flow looks like,
4090  *   - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
4091  *
4092  * @param dev
4093  *   Pointer to Ethernet device.
4094  * @param flow
4095  *   Pointer to flow structure.
4096  * @param[in] actions
4097  *   Pointer to the list of actions.
4098  * @param[out] error
4099  *   Perform verbose error reporting if not NULL.
4100  *
4101  * @return
4102  *   0 on success, negative value otherwise and rte_errno is set.
4103  */
4104 static int
4105 flow_mreg_update_copy_table(struct rte_eth_dev *dev,
4106                             struct rte_flow *flow,
4107                             const struct rte_flow_action *actions,
4108                             struct rte_flow_error *error)
4109 {
4110         struct mlx5_priv *priv = dev->data->dev_private;
4111         struct mlx5_dev_config *config = &priv->config;
4112         struct mlx5_flow_mreg_copy_resource *mcp_res;
4113         const struct rte_flow_action_mark *mark;
4114
4115         /* Check whether extensive metadata feature is engaged. */
4116         if (!config->dv_flow_en ||
4117             config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
4118             !mlx5_flow_ext_mreg_supported(dev) ||
4119             !priv->sh->dv_regc0_mask)
4120                 return 0;
4121         /* Find MARK action. */
4122         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4123                 switch (actions->type) {
4124                 case RTE_FLOW_ACTION_TYPE_FLAG:
4125                         mcp_res = flow_mreg_add_copy_action
4126                                 (dev, MLX5_FLOW_MARK_DEFAULT, error);
4127                         if (!mcp_res)
4128                                 return -rte_errno;
4129                         flow->rix_mreg_copy = mcp_res->idx;
4130                         return 0;
4131                 case RTE_FLOW_ACTION_TYPE_MARK:
4132                         mark = (const struct rte_flow_action_mark *)
4133                                 actions->conf;
4134                         mcp_res =
4135                                 flow_mreg_add_copy_action(dev, mark->id, error);
4136                         if (!mcp_res)
4137                                 return -rte_errno;
4138                         flow->rix_mreg_copy = mcp_res->idx;
4139                         return 0;
4140                 default:
4141                         break;
4142                 }
4143         }
4144         return 0;
4145 }
4146
4147 #define MLX5_MAX_SPLIT_ACTIONS 24
4148 #define MLX5_MAX_SPLIT_ITEMS 24
4149
4150 /**
4151  * Split the hairpin flow.
4152  * Since HW can't support encap and push-vlan on Rx, we move these
4153  * actions to Tx.
4154  * If the count action is after the encap then we also
4155  * move the count action. in this case the count will also measure
4156  * the outer bytes.
4157  *
4158  * @param dev
4159  *   Pointer to Ethernet device.
4160  * @param[in] actions
4161  *   Associated actions (list terminated by the END action).
4162  * @param[out] actions_rx
4163  *   Rx flow actions.
4164  * @param[out] actions_tx
4165  *   Tx flow actions..
4166  * @param[out] pattern_tx
4167  *   The pattern items for the Tx flow.
4168  * @param[out] flow_id
4169  *   The flow ID connected to this flow.
4170  *
4171  * @return
4172  *   0 on success.
4173  */
4174 static int
4175 flow_hairpin_split(struct rte_eth_dev *dev,
4176                    const struct rte_flow_action actions[],
4177                    struct rte_flow_action actions_rx[],
4178                    struct rte_flow_action actions_tx[],
4179                    struct rte_flow_item pattern_tx[],
4180                    uint32_t flow_id)
4181 {
4182         const struct rte_flow_action_raw_encap *raw_encap;
4183         const struct rte_flow_action_raw_decap *raw_decap;
4184         struct mlx5_rte_flow_action_set_tag *set_tag;
4185         struct rte_flow_action *tag_action;
4186         struct mlx5_rte_flow_item_tag *tag_item;
4187         struct rte_flow_item *item;
4188         char *addr;
4189         int encap = 0;
4190
4191         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4192                 switch (actions->type) {
4193                 case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
4194                 case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
4195                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
4196                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
4197                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
4198                         rte_memcpy(actions_tx, actions,
4199                                sizeof(struct rte_flow_action));
4200                         actions_tx++;
4201                         break;
4202                 case RTE_FLOW_ACTION_TYPE_COUNT:
4203                         if (encap) {
4204                                 rte_memcpy(actions_tx, actions,
4205                                            sizeof(struct rte_flow_action));
4206                                 actions_tx++;
4207                         } else {
4208                                 rte_memcpy(actions_rx, actions,
4209                                            sizeof(struct rte_flow_action));
4210                                 actions_rx++;
4211                         }
4212                         break;
4213                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
4214                         raw_encap = actions->conf;
4215                         if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE) {
4216                                 memcpy(actions_tx, actions,
4217                                        sizeof(struct rte_flow_action));
4218                                 actions_tx++;
4219                                 encap = 1;
4220                         } else {
4221                                 rte_memcpy(actions_rx, actions,
4222                                            sizeof(struct rte_flow_action));
4223                                 actions_rx++;
4224                         }
4225                         break;
4226                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
4227                         raw_decap = actions->conf;
4228                         if (raw_decap->size < MLX5_ENCAPSULATION_DECISION_SIZE) {
4229                                 memcpy(actions_tx, actions,
4230                                        sizeof(struct rte_flow_action));
4231                                 actions_tx++;
4232                         } else {
4233                                 rte_memcpy(actions_rx, actions,
4234                                            sizeof(struct rte_flow_action));
4235                                 actions_rx++;
4236                         }
4237                         break;
4238                 default:
4239                         rte_memcpy(actions_rx, actions,
4240                                    sizeof(struct rte_flow_action));
4241                         actions_rx++;
4242                         break;
4243                 }
4244         }
4245         /* Add set meta action and end action for the Rx flow. */
4246         tag_action = actions_rx;
4247         tag_action->type = (enum rte_flow_action_type)
4248                            MLX5_RTE_FLOW_ACTION_TYPE_TAG;
4249         actions_rx++;
4250         rte_memcpy(actions_rx, actions, sizeof(struct rte_flow_action));
4251         actions_rx++;
4252         set_tag = (void *)actions_rx;
4253         set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_RX, 0, NULL);
4254         MLX5_ASSERT(set_tag->id > REG_NON);
4255         set_tag->data = flow_id;
4256         tag_action->conf = set_tag;
4257         /* Create Tx item list. */
4258         rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action));
4259         addr = (void *)&pattern_tx[2];
4260         item = pattern_tx;
4261         item->type = (enum rte_flow_item_type)
4262                      MLX5_RTE_FLOW_ITEM_TYPE_TAG;
4263         tag_item = (void *)addr;
4264         tag_item->data = flow_id;
4265         tag_item->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_TX, 0, NULL);
4266         MLX5_ASSERT(set_tag->id > REG_NON);
4267         item->spec = tag_item;
4268         addr += sizeof(struct mlx5_rte_flow_item_tag);
4269         tag_item = (void *)addr;
4270         tag_item->data = UINT32_MAX;
4271         tag_item->id = UINT16_MAX;
4272         item->mask = tag_item;
4273         item->last = NULL;
4274         item++;
4275         item->type = RTE_FLOW_ITEM_TYPE_END;
4276         return 0;
4277 }
4278
4279 /**
4280  * The last stage of splitting chain, just creates the subflow
4281  * without any modification.
4282  *
4283  * @param[in] dev
4284  *   Pointer to Ethernet device.
4285  * @param[in] flow
4286  *   Parent flow structure pointer.
4287  * @param[in, out] sub_flow
4288  *   Pointer to return the created subflow, may be NULL.
4289  * @param[in] attr
4290  *   Flow rule attributes.
4291  * @param[in] items
4292  *   Pattern specification (list terminated by the END pattern item).
4293  * @param[in] actions
4294  *   Associated actions (list terminated by the END action).
4295  * @param[in] flow_split_info
4296  *   Pointer to flow split info structure.
4297  * @param[out] error
4298  *   Perform verbose error reporting if not NULL.
4299  * @return
4300  *   0 on success, negative value otherwise
4301  */
4302 static int
4303 flow_create_split_inner(struct rte_eth_dev *dev,
4304                         struct rte_flow *flow,
4305                         struct mlx5_flow **sub_flow,
4306                         const struct rte_flow_attr *attr,
4307                         const struct rte_flow_item items[],
4308                         const struct rte_flow_action actions[],
4309                         struct mlx5_flow_split_info *flow_split_info,
4310                         struct rte_flow_error *error)
4311 {
4312         struct mlx5_flow *dev_flow;
4313
4314         dev_flow = flow_drv_prepare(dev, flow, attr, items, actions,
4315                                     flow_split_info->flow_idx, error);
4316         if (!dev_flow)
4317                 return -rte_errno;
4318         dev_flow->flow = flow;
4319         dev_flow->external = flow_split_info->external;
4320         dev_flow->skip_scale = flow_split_info->skip_scale;
4321         /* Subflow object was created, we must include one in the list. */
4322         SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
4323                       dev_flow->handle, next);
4324         /*
4325          * If dev_flow is as one of the suffix flow, some actions in suffix
4326          * flow may need some user defined item layer flags, and pass the
4327          * Metadate rxq mark flag to suffix flow as well.
4328          */
4329         if (flow_split_info->prefix_layers)
4330                 dev_flow->handle->layers = flow_split_info->prefix_layers;
4331         if (flow_split_info->prefix_mark)
4332                 dev_flow->handle->mark = 1;
4333         if (sub_flow)
4334                 *sub_flow = dev_flow;
4335         return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
4336 }
4337
4338 /**
4339  * Split the meter flow.
4340  *
4341  * As meter flow will split to three sub flow, other than meter
4342  * action, the other actions make sense to only meter accepts
4343  * the packet. If it need to be dropped, no other additional
4344  * actions should be take.
4345  *
4346  * One kind of special action which decapsulates the L3 tunnel
4347  * header will be in the prefix sub flow, as not to take the
4348  * L3 tunnel header into account.
4349  *
4350  * @param dev
4351  *   Pointer to Ethernet device.
4352  * @param[in] items
4353  *   Pattern specification (list terminated by the END pattern item).
4354  * @param[out] sfx_items
4355  *   Suffix flow match items (list terminated by the END pattern item).
4356  * @param[in] actions
4357  *   Associated actions (list terminated by the END action).
4358  * @param[out] actions_sfx
4359  *   Suffix flow actions.
4360  * @param[out] actions_pre
4361  *   Prefix flow actions.
4362  * @param[out] pattern_sfx
4363  *   The pattern items for the suffix flow.
4364  * @param[out] tag_sfx
4365  *   Pointer to suffix flow tag.
4366  *
4367  * @return
4368  *   0 on success.
4369  */
4370 static int
4371 flow_meter_split_prep(struct rte_eth_dev *dev,
4372                  const struct rte_flow_item items[],
4373                  struct rte_flow_item sfx_items[],
4374                  const struct rte_flow_action actions[],
4375                  struct rte_flow_action actions_sfx[],
4376                  struct rte_flow_action actions_pre[])
4377 {
4378         struct mlx5_priv *priv = dev->data->dev_private;
4379         struct rte_flow_action *tag_action = NULL;
4380         struct rte_flow_item *tag_item;
4381         struct mlx5_rte_flow_action_set_tag *set_tag;
4382         struct rte_flow_error error;
4383         const struct rte_flow_action_raw_encap *raw_encap;
4384         const struct rte_flow_action_raw_decap *raw_decap;
4385         struct mlx5_rte_flow_item_tag *tag_spec;
4386         struct mlx5_rte_flow_item_tag *tag_mask;
4387         uint32_t tag_id = 0;
4388         bool copy_vlan = false;
4389
4390         /* Prepare the actions for prefix and suffix flow. */
4391         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4392                 struct rte_flow_action **action_cur = NULL;
4393
4394                 switch (actions->type) {
4395                 case RTE_FLOW_ACTION_TYPE_METER:
4396                         /* Add the extra tag action first. */
4397                         tag_action = actions_pre;
4398                         tag_action->type = (enum rte_flow_action_type)
4399                                            MLX5_RTE_FLOW_ACTION_TYPE_TAG;
4400                         actions_pre++;
4401                         action_cur = &actions_pre;
4402                         break;
4403                 case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
4404                 case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
4405                         action_cur = &actions_pre;
4406                         break;
4407                 case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
4408                         raw_encap = actions->conf;
4409                         if (raw_encap->size < MLX5_ENCAPSULATION_DECISION_SIZE)
4410                                 action_cur = &actions_pre;
4411                         break;
4412                 case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
4413                         raw_decap = actions->conf;
4414                         if (raw_decap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
4415                                 action_cur = &actions_pre;
4416                         break;
4417                 case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
4418                 case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
4419                         copy_vlan = true;
4420                         break;
4421                 default:
4422                         break;
4423                 }
4424                 if (!action_cur)
4425                         action_cur = &actions_sfx;
4426                 memcpy(*action_cur, actions, sizeof(struct rte_flow_action));
4427                 (*action_cur)++;
4428         }
4429         /* Add end action to the actions. */
4430         actions_sfx->type = RTE_FLOW_ACTION_TYPE_END;
4431         actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
4432         actions_pre++;
4433         /* Set the tag. */
4434         set_tag = (void *)actions_pre;
4435         set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
4436         mlx5_ipool_malloc(priv->sh->ipool[MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
4437                           &tag_id);
4438         if (tag_id >= (1 << (sizeof(tag_id) * 8 - MLX5_MTR_COLOR_BITS))) {
4439                 DRV_LOG(ERR, "Port %u meter flow id exceed max limit.",
4440                         dev->data->port_id);
4441                 mlx5_ipool_free(priv->sh->ipool
4442                                 [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID], tag_id);
4443                 return 0;
4444         } else if (!tag_id) {
4445                 return 0;
4446         }
4447         set_tag->data = tag_id << MLX5_MTR_COLOR_BITS;
4448         assert(tag_action);
4449         tag_action->conf = set_tag;
4450         /* Prepare the suffix subflow items. */
4451         tag_item = sfx_items++;
4452         for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
4453                 int item_type = items->type;
4454
4455                 switch (item_type) {
4456                 case RTE_FLOW_ITEM_TYPE_PORT_ID:
4457                         memcpy(sfx_items, items, sizeof(*sfx_items));
4458                         sfx_items++;
4459                         break;
4460                 case RTE_FLOW_ITEM_TYPE_VLAN:
4461                         if (copy_vlan) {
4462                                 memcpy(sfx_items, items, sizeof(*sfx_items));
4463                                 /*
4464                                  * Convert to internal match item, it is used
4465                                  * for vlan push and set vid.
4466                                  */
4467                                 sfx_items->type = (enum rte_flow_item_type)
4468                                                   MLX5_RTE_FLOW_ITEM_TYPE_VLAN;
4469                                 sfx_items++;
4470                         }
4471                         break;
4472                 default:
4473                         break;
4474                 }
4475         }
4476         sfx_items->type = RTE_FLOW_ITEM_TYPE_END;
4477         sfx_items++;
4478         tag_spec = (struct mlx5_rte_flow_item_tag *)sfx_items;
4479         tag_spec->data = tag_id << MLX5_MTR_COLOR_BITS;
4480         tag_spec->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
4481         tag_mask = tag_spec + 1;
4482         tag_mask->data = 0xffffff00;
4483         tag_item->type = (enum rte_flow_item_type)
4484                          MLX5_RTE_FLOW_ITEM_TYPE_TAG;
4485         tag_item->spec = tag_spec;
4486         tag_item->last = NULL;
4487         tag_item->mask = tag_mask;
4488         return tag_id;
4489 }
4490
4491 /**
4492  * Split action list having QUEUE/RSS for metadata register copy.
4493  *
4494  * Once Q/RSS action is detected in user's action list, the flow action
4495  * should be split in order to copy metadata registers, which will happen in
4496  * RX_CP_TBL like,
4497  *   - CQE->flow_tag := reg_c[1] (MARK)
4498  *   - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
4499  * The Q/RSS action will be performed on RX_ACT_TBL after passing by RX_CP_TBL.
4500  * This is because the last action of each flow must be a terminal action
4501  * (QUEUE, RSS or DROP).
4502  *
4503  * Flow ID must be allocated to identify actions in the RX_ACT_TBL and it is
4504  * stored and kept in the mlx5_flow structure per each sub_flow.
4505  *
4506  * The Q/RSS action is replaced with,
4507  *   - SET_TAG, setting the allocated flow ID to reg_c[2].
4508  * And the following JUMP action is added at the end,
4509  *   - JUMP, to RX_CP_TBL.
4510  *
4511  * A flow to perform remained Q/RSS action will be created in RX_ACT_TBL by
4512  * flow_create_split_metadata() routine. The flow will look like,
4513  *   - If flow ID matches (reg_c[2]), perform Q/RSS.
4514  *
4515  * @param dev
4516  *   Pointer to Ethernet device.
4517  * @param[out] split_actions
4518  *   Pointer to store split actions to jump to CP_TBL.
4519  * @param[in] actions
4520  *   Pointer to the list of original flow actions.
4521  * @param[in] qrss
4522  *   Pointer to the Q/RSS action.
4523  * @param[in] actions_n
4524  *   Number of original actions.
4525  * @param[out] error
4526  *   Perform verbose error reporting if not NULL.
4527  *
4528  * @return
4529  *   non-zero unique flow_id on success, otherwise 0 and
4530  *   error/rte_error are set.
4531  */
4532 static uint32_t
4533 flow_mreg_split_qrss_prep(struct rte_eth_dev *dev,
4534                           struct rte_flow_action *split_actions,
4535                           const struct rte_flow_action *actions,
4536                           const struct rte_flow_action *qrss,
4537                           int actions_n, struct rte_flow_error *error)
4538 {
4539         struct mlx5_priv *priv = dev->data->dev_private;
4540         struct mlx5_rte_flow_action_set_tag *set_tag;
4541         struct rte_flow_action_jump *jump;
4542         const int qrss_idx = qrss - actions;
4543         uint32_t flow_id = 0;
4544         int ret = 0;
4545
4546         /*
4547          * Given actions will be split
4548          * - Replace QUEUE/RSS action with SET_TAG to set flow ID.
4549          * - Add jump to mreg CP_TBL.
4550          * As a result, there will be one more action.
4551          */
4552         ++actions_n;
4553         memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
4554         set_tag = (void *)(split_actions + actions_n);
4555         /*
4556          * If tag action is not set to void(it means we are not the meter
4557          * suffix flow), add the tag action. Since meter suffix flow already
4558          * has the tag added.
4559          */
4560         if (split_actions[qrss_idx].type != RTE_FLOW_ACTION_TYPE_VOID) {
4561                 /*
4562                  * Allocate the new subflow ID. This one is unique within
4563                  * device and not shared with representors. Otherwise,
4564                  * we would have to resolve multi-thread access synch
4565                  * issue. Each flow on the shared device is appended
4566                  * with source vport identifier, so the resulting
4567                  * flows will be unique in the shared (by master and
4568                  * representors) domain even if they have coinciding
4569                  * IDs.
4570                  */
4571                 mlx5_ipool_malloc(priv->sh->ipool
4572                                   [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID], &flow_id);
4573                 if (!flow_id)
4574                         return rte_flow_error_set(error, ENOMEM,
4575                                                   RTE_FLOW_ERROR_TYPE_ACTION,
4576                                                   NULL, "can't allocate id "
4577                                                   "for split Q/RSS subflow");
4578                 /* Internal SET_TAG action to set flow ID. */
4579                 *set_tag = (struct mlx5_rte_flow_action_set_tag){
4580                         .data = flow_id,
4581                 };
4582                 ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
4583                 if (ret < 0)
4584                         return ret;
4585                 set_tag->id = ret;
4586                 /* Construct new actions array. */
4587                 /* Replace QUEUE/RSS action. */
4588                 split_actions[qrss_idx] = (struct rte_flow_action){
4589                         .type = (enum rte_flow_action_type)
4590                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG,
4591                         .conf = set_tag,
4592                 };
4593         }
4594         /* JUMP action to jump to mreg copy table (CP_TBL). */
4595         jump = (void *)(set_tag + 1);
4596         *jump = (struct rte_flow_action_jump){
4597                 .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
4598         };
4599         split_actions[actions_n - 2] = (struct rte_flow_action){
4600                 .type = RTE_FLOW_ACTION_TYPE_JUMP,
4601                 .conf = jump,
4602         };
4603         split_actions[actions_n - 1] = (struct rte_flow_action){
4604                 .type = RTE_FLOW_ACTION_TYPE_END,
4605         };
4606         return flow_id;
4607 }
4608
4609 /**
4610  * Extend the given action list for Tx metadata copy.
4611  *
4612  * Copy the given action list to the ext_actions and add flow metadata register
4613  * copy action in order to copy reg_a set by WQE to reg_c[0].
4614  *
4615  * @param[out] ext_actions
4616  *   Pointer to the extended action list.
4617  * @param[in] actions
4618  *   Pointer to the list of actions.
4619  * @param[in] actions_n
4620  *   Number of actions in the list.
4621  * @param[out] error
4622  *   Perform verbose error reporting if not NULL.
4623  * @param[in] encap_idx
4624  *   The encap action inndex.
4625  *
4626  * @return
4627  *   0 on success, negative value otherwise
4628  */
4629 static int
4630 flow_mreg_tx_copy_prep(struct rte_eth_dev *dev,
4631                        struct rte_flow_action *ext_actions,
4632                        const struct rte_flow_action *actions,
4633                        int actions_n, struct rte_flow_error *error,
4634                        int encap_idx)
4635 {
4636         struct mlx5_flow_action_copy_mreg *cp_mreg =
4637                 (struct mlx5_flow_action_copy_mreg *)
4638                         (ext_actions + actions_n + 1);
4639         int ret;
4640
4641         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
4642         if (ret < 0)
4643                 return ret;
4644         cp_mreg->dst = ret;
4645         ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_TX, 0, error);
4646         if (ret < 0)
4647                 return ret;
4648         cp_mreg->src = ret;
4649         if (encap_idx != 0)
4650                 memcpy(ext_actions, actions, sizeof(*ext_actions) * encap_idx);
4651         if (encap_idx == actions_n - 1) {
4652                 ext_actions[actions_n - 1] = (struct rte_flow_action){
4653                         .type = (enum rte_flow_action_type)
4654                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
4655                         .conf = cp_mreg,
4656                 };
4657                 ext_actions[actions_n] = (struct rte_flow_action){
4658                         .type = RTE_FLOW_ACTION_TYPE_END,
4659                 };
4660         } else {
4661                 ext_actions[encap_idx] = (struct rte_flow_action){
4662                         .type = (enum rte_flow_action_type)
4663                                 MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
4664                         .conf = cp_mreg,
4665                 };
4666                 memcpy(ext_actions + encap_idx + 1, actions + encap_idx,
4667                                 sizeof(*ext_actions) * (actions_n - encap_idx));
4668         }
4669         return 0;
4670 }
4671
4672 /**
4673  * Check the match action from the action list.
4674  *
4675  * @param[in] actions
4676  *   Pointer to the list of actions.
4677  * @param[in] attr
4678  *   Flow rule attributes.
4679  * @param[in] action
4680  *   The action to be check if exist.
4681  * @param[out] match_action_pos
4682  *   Pointer to the position of the matched action if exists, otherwise is -1.
4683  * @param[out] qrss_action_pos
4684  *   Pointer to the position of the Queue/RSS action if exists, otherwise is -1.
4685  * @param[out] modify_after_mirror
4686  *   Pointer to the flag of modify action after FDB mirroring.
4687  *
4688  * @return
4689  *   > 0 the total number of actions.
4690  *   0 if not found match action in action list.
4691  */
4692 static int
4693 flow_check_match_action(const struct rte_flow_action actions[],
4694                         const struct rte_flow_attr *attr,
4695                         enum rte_flow_action_type action,
4696                         int *match_action_pos, int *qrss_action_pos,
4697                         int *modify_after_mirror)
4698 {
4699         const struct rte_flow_action_sample *sample;
4700         int actions_n = 0;
4701         uint32_t ratio = 0;
4702         int sub_type = 0;
4703         int flag = 0;
4704         int fdb_mirror = 0;
4705
4706         *match_action_pos = -1;
4707         *qrss_action_pos = -1;
4708         for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
4709                 if (actions->type == action) {
4710                         flag = 1;
4711                         *match_action_pos = actions_n;
4712                 }
4713                 switch (actions->type) {
4714                 case RTE_FLOW_ACTION_TYPE_QUEUE:
4715                 case RTE_FLOW_ACTION_TYPE_RSS:
4716                         *qrss_action_pos = actions_n;
4717                         break;
4718                 case RTE_FLOW_ACTION_TYPE_SAMPLE:
4719                         sample = actions->conf;
4720                         ratio = sample->ratio;
4721                         sub_type = ((const struct rte_flow_action *)
4722                                         (sample->actions))->type;
4723                         if (ratio == 1 && attr->transfer)
4724                                 fdb_mirror = 1;
4725                         break;
4726                 case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
4727                 case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
4728                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
4729                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
4730                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
4731                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
4732                 case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
4733                 case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
4734                 case RTE_FLOW_ACTION_TYPE_DEC_TTL:
4735                 case RTE_FLOW_ACTION_TYPE_SET_TTL:
4736                 case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
4737                 case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
4738                 case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
4739                 case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
4740                 case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
4741                 case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
4742                 case RTE_FLOW_ACTION_TYPE_FLAG:
4743                 case RTE_FLOW_ACTION_TYPE_MARK:
4744                 case RTE_FLOW_ACTION_TYPE_SET_META:
4745                 case RTE_FLOW_ACTION_TYPE_SET_TAG:
4746                         if (fdb_mirror)
4747                                 *modify_after_mirror = 1;
4748                         break;
4749                 default:
4750                         break;
4751                 }
4752                 actions_n++;
4753         }
4754         if (flag && fdb_mirror && !*modify_after_mirror) {
4755                 /* FDB mirroring uses the destination array to implement
4756                  * instead of FLOW_SAMPLER object.
4757                  */
4758                 if (sub_type != RTE_FLOW_ACTION_TYPE_END)
4759                         flag = 0;
4760         }
4761         /* Count RTE_FLOW_ACTION_TYPE_END. */
4762         return flag ? actions_n + 1 : 0;
4763 }
4764
4765 #define SAMPLE_SUFFIX_ITEM 2
4766
4767 /**
4768  * Split the sample flow.
4769  *
4770  * As sample flow will split to two sub flow, sample flow with
4771  * sample action, the other actions will move to new suffix flow.
4772  *
4773  * Also add unique tag id with tag action in the sample flow,
4774  * the same tag id will be as match in the suffix flow.
4775  *
4776  * @param dev
4777  *   Pointer to Ethernet device.
4778  * @param[in] add_tag
4779  *   Add extra tag action flag.
4780  * @param[out] sfx_items
4781  *   Suffix flow match items (list terminated by the END pattern item).
4782  * @param[in] actions
4783  *   Associated actions (list terminated by the END action).
4784  * @param[out] actions_sfx
4785  *   Suffix flow actions.
4786  * @param[out] actions_pre
4787  *   Prefix flow actions.
4788  * @param[in] actions_n
4789  *  The total number of actions.
4790  * @param[in] sample_action_pos
4791  *   The sample action position.
4792  * @param[in] qrss_action_pos
4793  *   The Queue/RSS action position.
4794  * @param[in] jump_table
4795  *   Add extra jump action flag.
4796  * @param[out] error
4797  *   Perform verbose error reporting if not NULL.
4798  *
4799  * @return
4800  *   0 on success, or unique flow_id, a negative errno value
4801  *   otherwise and rte_errno is set.
4802  */
4803 static int
4804 flow_sample_split_prep(struct rte_eth_dev *dev,
4805                        int add_tag,
4806                        struct rte_flow_item sfx_items[],
4807                        const struct rte_flow_action actions[],
4808                        struct rte_flow_action actions_sfx[],
4809                        struct rte_flow_action actions_pre[],
4810                        int actions_n,
4811                        int sample_action_pos,
4812                        int qrss_action_pos,
4813                        int jump_table,
4814                        struct rte_flow_error *error)
4815 {
4816         struct mlx5_priv *priv = dev->data->dev_private;
4817         struct mlx5_rte_flow_action_set_tag *set_tag;
4818         struct mlx5_rte_flow_item_tag *tag_spec;
4819         struct mlx5_rte_flow_item_tag *tag_mask;
4820         struct rte_flow_action_jump *jump_action;
4821         uint32_t tag_id = 0;
4822         int index;
4823         int append_index = 0;
4824         int ret;
4825
4826         if (sample_action_pos < 0)
4827                 return rte_flow_error_set(error, EINVAL,
4828                                           RTE_FLOW_ERROR_TYPE_ACTION,
4829                                           NULL, "invalid position of sample "
4830                                           "action in list");
4831         /* Prepare the actions for prefix and suffix flow. */
4832         if (qrss_action_pos >= 0 && qrss_action_pos < sample_action_pos) {
4833                 index = qrss_action_pos;
4834                 /* Put the preceding the Queue/RSS action into prefix flow. */
4835                 if (index != 0)
4836                         memcpy(actions_pre, actions,
4837                                sizeof(struct rte_flow_action) * index);
4838                 /* Put others preceding the sample action into prefix flow. */
4839                 if (sample_action_pos > index + 1)
4840                         memcpy(actions_pre + index, actions + index + 1,
4841                                sizeof(struct rte_flow_action) *
4842                                (sample_action_pos - index - 1));
4843                 index = sample_action_pos - 1;
4844                 /* Put Queue/RSS action into Suffix flow. */
4845                 memcpy(actions_sfx, actions + qrss_action_pos,
4846                        sizeof(struct rte_flow_action));
4847                 actions_sfx++;
4848         } else {
4849                 index = sample_action_pos;
4850                 if (index != 0)
4851                         memcpy(actions_pre, actions,
4852                                sizeof(struct rte_flow_action) * index);
4853         }
4854         /* For CX5, add an extra tag action for NIC-RX and E-Switch ingress.
4855          * For CX6DX and above, metadata registers Cx preserve their value,
4856          * add an extra tag action for NIC-RX and E-Switch Domain.
4857          */
4858         if (add_tag) {
4859                 /* Prepare the prefix tag action. */
4860                 append_index++;
4861                 set_tag = (void *)(actions_pre + actions_n + append_index);
4862                 ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, 0, error);
4863                 if (ret < 0)
4864                         return ret;
4865                 set_tag->id = ret;
4866                 mlx5_ipool_malloc(priv->sh->ipool
4867                                   [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID], &tag_id);
4868                 set_tag->data = tag_id;
4869                 /* Prepare the suffix subflow items. */
4870                 tag_spec = (void *)(sfx_items + SAMPLE_SUFFIX_ITEM);
4871                 tag_spec->data = tag_id;
4872                 tag_spec->id = set_tag->id;
4873                 tag_mask = tag_spec + 1;
4874                 tag_mask->data = UINT32_MAX;
4875                 sfx_items[0] = (struct rte_flow_item){
4876                         .type = (enum rte_flow_item_type)
4877                                 MLX5_RTE_FLOW_ITEM_TYPE_TAG,
4878                         .spec = tag_spec,
4879                         .last = NULL,
4880                         .mask = tag_mask,
4881                 };
4882                 sfx_items[1] = (struct rte_flow_item){
4883                         .type = (enum rte_flow_item_type)
4884                                 RTE_FLOW_ITEM_TYPE_END,
4885                 };
4886                 /* Prepare the tag action in prefix subflow. */
4887                 actions_pre[index++] =
4888                         (struct rte_flow_action){
4889                         .type = (enum rte_flow_action_type)
4890                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG,
4891                         .conf = set_tag,
4892                 };
4893         }
4894         memcpy(actions_pre + index, actions + sample_action_pos,
4895                sizeof(struct rte_flow_action));
4896         index += 1;
4897         /* For the modify action after the sample action in E-Switch mirroring,
4898          * Add the extra jump action in prefix subflow and jump into the next
4899          * table, then do the modify action in the new table.
4900          */
4901         if (jump_table) {
4902                 /* Prepare the prefix jump action. */
4903                 append_index++;
4904                 jump_action = (void *)(actions_pre + actions_n + append_index);
4905                 jump_action->group = jump_table;
4906                 actions_pre[index++] =
4907                         (struct rte_flow_action){
4908                         .type = (enum rte_flow_action_type)
4909                                 RTE_FLOW_ACTION_TYPE_JUMP,
4910                         .conf = jump_action,
4911                 };
4912         }
4913         actions_pre[index] = (struct rte_flow_action){
4914                 .type = (enum rte_flow_action_type)
4915                         RTE_FLOW_ACTION_TYPE_END,
4916         };
4917         /* Put the actions after sample into Suffix flow. */
4918         memcpy(actions_sfx, actions + sample_action_pos + 1,
4919                sizeof(struct rte_flow_action) *
4920                (actions_n - sample_action_pos - 1));
4921         return tag_id;
4922 }
4923
4924 /**
4925  * The splitting for metadata feature.
4926  *
4927  * - Q/RSS action on NIC Rx should be split in order to pass by
4928  *   the mreg copy table (RX_CP_TBL) and then it jumps to the
4929  *   action table (RX_ACT_TBL) which has the split Q/RSS action.
4930  *
4931  * - All the actions on NIC Tx should have a mreg copy action to
4932  *   copy reg_a from WQE to reg_c[0].
4933  *
4934  * @param dev
4935  *   Pointer to Ethernet device.
4936  * @param[in] flow
4937  *   Parent flow structure pointer.
4938  * @param[in] attr
4939  *   Flow rule attributes.
4940  * @param[in] items
4941  *   Pattern specification (list terminated by the END pattern item).
4942  * @param[in] actions
4943  *   Associated actions (list terminated by the END action).
4944  * @param[in] flow_split_info
4945  *   Pointer to flow split info structure.
4946  * @param[out] error
4947  *   Perform verbose error reporting if not NULL.
4948  * @return
4949  *   0 on success, negative value otherwise
4950  */
4951 static int
4952 flow_create_split_metadata(struct rte_eth_dev *dev,
4953                            struct rte_flow *flow,
4954                            const struct rte_flow_attr *attr,
4955                            const struct rte_flow_item items[],
4956                            const struct rte_flow_action actions[],
4957                            struct mlx5_flow_split_info *flow_split_info,
4958                            struct rte_flow_error *error)
4959 {
4960         struct mlx5_priv *priv = dev->data->dev_private;
4961         struct mlx5_dev_config *config = &priv->config;
4962         const struct rte_flow_action *qrss = NULL;
4963         struct rte_flow_action *ext_actions = NULL;
4964         struct mlx5_flow *dev_flow = NULL;
4965         uint32_t qrss_id = 0;
4966         int mtr_sfx = 0;
4967         size_t act_size;
4968         int actions_n;
4969         int encap_idx;
4970         int ret;
4971
4972         /* Check whether extensive metadata feature is engaged. */
4973         if (!config->dv_flow_en ||
4974             config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
4975             !mlx5_flow_ext_mreg_supported(dev))
4976                 return flow_create_split_inner(dev, flow, NULL, attr, items,
4977                                                actions, flow_split_info, error);
4978         actions_n = flow_parse_metadata_split_actions_info(actions, &qrss,
4979                                                            &encap_idx);
4980         if (qrss) {
4981                 /* Exclude hairpin flows from splitting. */
4982                 if (qrss->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
4983                         const struct rte_flow_action_queue *queue;
4984
4985                         queue = qrss->conf;
4986                         if (mlx5_rxq_get_type(dev, queue->index) ==
4987                             MLX5_RXQ_TYPE_HAIRPIN)
4988                                 qrss = NULL;
4989                 } else if (qrss->type == RTE_FLOW_ACTION_TYPE_RSS) {
4990                         const struct rte_flow_action_rss *rss;
4991
4992                         rss = qrss->conf;
4993                         if (mlx5_rxq_get_type(dev, rss->queue[0]) ==
4994                             MLX5_RXQ_TYPE_HAIRPIN)
4995                                 qrss = NULL;
4996                 }
4997         }
4998         if (qrss) {
4999                 /* Check if it is in meter suffix table. */
5000                 mtr_sfx = attr->group == (attr->transfer ?
5001                           (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
5002                           MLX5_FLOW_TABLE_LEVEL_SUFFIX);
5003                 /*
5004                  * Q/RSS action on NIC Rx should be split in order to pass by
5005                  * the mreg copy table (RX_CP_TBL) and then it jumps to the
5006                  * action table (RX_ACT_TBL) which has the split Q/RSS action.
5007                  */
5008                 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
5009                            sizeof(struct rte_flow_action_set_tag) +
5010                            sizeof(struct rte_flow_action_jump);
5011                 ext_actions = mlx5_malloc(MLX5_MEM_ZERO, act_size, 0,
5012                                           SOCKET_ID_ANY);
5013                 if (!ext_actions)
5014                         return rte_flow_error_set(error, ENOMEM,
5015                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5016                                                   NULL, "no memory to split "
5017                                                   "metadata flow");
5018                 /*
5019                  * If we are the suffix flow of meter, tag already exist.
5020                  * Set the tag action to void.
5021                  */
5022                 if (mtr_sfx)
5023                         ext_actions[qrss - actions].type =
5024                                                 RTE_FLOW_ACTION_TYPE_VOID;
5025                 else
5026                         ext_actions[qrss - actions].type =
5027                                                 (enum rte_flow_action_type)
5028                                                 MLX5_RTE_FLOW_ACTION_TYPE_TAG;
5029                 /*
5030                  * Create the new actions list with removed Q/RSS action
5031                  * and appended set tag and jump to register copy table
5032                  * (RX_CP_TBL). We should preallocate unique tag ID here
5033                  * in advance, because it is needed for set tag action.
5034                  */
5035                 qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
5036                                                     qrss, actions_n, error);
5037                 if (!mtr_sfx && !qrss_id) {
5038                         ret = -rte_errno;
5039                         goto exit;
5040                 }
5041         } else if (attr->egress && !attr->transfer) {
5042                 /*
5043                  * All the actions on NIC Tx should have a metadata register
5044                  * copy action to copy reg_a from WQE to reg_c[meta]
5045                  */
5046                 act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
5047                            sizeof(struct mlx5_flow_action_copy_mreg);
5048                 ext_actions = mlx5_malloc(MLX5_MEM_ZERO, act_size, 0,
5049                                           SOCKET_ID_ANY);
5050                 if (!ext_actions)
5051                         return rte_flow_error_set(error, ENOMEM,
5052                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5053                                                   NULL, "no memory to split "
5054                                                   "metadata flow");
5055                 /* Create the action list appended with copy register. */
5056                 ret = flow_mreg_tx_copy_prep(dev, ext_actions, actions,
5057                                              actions_n, error, encap_idx);
5058                 if (ret < 0)
5059                         goto exit;
5060         }
5061         /* Add the unmodified original or prefix subflow. */
5062         ret = flow_create_split_inner(dev, flow, &dev_flow, attr,
5063                                       items, ext_actions ? ext_actions :
5064                                       actions, flow_split_info, error);
5065         if (ret < 0)
5066                 goto exit;
5067         MLX5_ASSERT(dev_flow);
5068         if (qrss) {
5069                 const struct rte_flow_attr q_attr = {
5070                         .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
5071                         .ingress = 1,
5072                 };
5073                 /* Internal PMD action to set register. */
5074                 struct mlx5_rte_flow_item_tag q_tag_spec = {
5075                         .data = qrss_id,
5076                         .id = REG_NON,
5077                 };
5078                 struct rte_flow_item q_items[] = {
5079                         {
5080                                 .type = (enum rte_flow_item_type)
5081                                         MLX5_RTE_FLOW_ITEM_TYPE_TAG,
5082                                 .spec = &q_tag_spec,
5083                                 .last = NULL,
5084                                 .mask = NULL,
5085                         },
5086                         {
5087                                 .type = RTE_FLOW_ITEM_TYPE_END,
5088                         },
5089                 };
5090                 struct rte_flow_action q_actions[] = {
5091                         {
5092                                 .type = qrss->type,
5093                                 .conf = qrss->conf,
5094                         },
5095                         {
5096                                 .type = RTE_FLOW_ACTION_TYPE_END,
5097                         },
5098                 };
5099                 uint64_t layers = flow_get_prefix_layer_flags(dev_flow);
5100
5101                 /*
5102                  * Configure the tag item only if there is no meter subflow.
5103                  * Since tag is already marked in the meter suffix subflow
5104                  * we can just use the meter suffix items as is.
5105                  */
5106                 if (qrss_id) {
5107                         /* Not meter subflow. */
5108                         MLX5_ASSERT(!mtr_sfx);
5109                         /*
5110                          * Put unique id in prefix flow due to it is destroyed
5111                          * after suffix flow and id will be freed after there
5112                          * is no actual flows with this id and identifier
5113                          * reallocation becomes possible (for example, for
5114                          * other flows in other threads).
5115                          */
5116                         dev_flow->handle->split_flow_id = qrss_id;
5117                         ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0,
5118                                                    error);
5119                         if (ret < 0)
5120                                 goto exit;
5121                         q_tag_spec.id = ret;
5122                 }
5123                 dev_flow = NULL;
5124                 /* Add suffix subflow to execute Q/RSS. */
5125                 flow_split_info->prefix_layers = layers;
5126                 flow_split_info->prefix_mark = 0;
5127                 ret = flow_create_split_inner(dev, flow, &dev_flow,
5128                                               &q_attr, mtr_sfx ? items :
5129                                               q_items, q_actions,
5130                                               flow_split_info, error);
5131                 if (ret < 0)
5132                         goto exit;
5133                 /* qrss ID should be freed if failed. */
5134                 qrss_id = 0;
5135                 MLX5_ASSERT(dev_flow);
5136         }
5137
5138 exit:
5139         /*
5140          * We do not destroy the partially created sub_flows in case of error.
5141          * These ones are included into parent flow list and will be destroyed
5142          * by flow_drv_destroy.
5143          */
5144         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
5145                         qrss_id);
5146         mlx5_free(ext_actions);
5147         return ret;
5148 }
5149
5150 /**
5151  * The splitting for meter feature.
5152  *
5153  * - The meter flow will be split to two flows as prefix and
5154  *   suffix flow. The packets make sense only it pass the prefix
5155  *   meter action.
5156  *
5157  * - Reg_C_5 is used for the packet to match betweend prefix and
5158  *   suffix flow.
5159  *
5160  * @param dev
5161  *   Pointer to Ethernet device.
5162  * @param[in] flow
5163  *   Parent flow structure pointer.
5164  * @param[in] attr
5165  *   Flow rule attributes.
5166  * @param[in] items
5167  *   Pattern specification (list terminated by the END pattern item).
5168  * @param[in] actions
5169  *   Associated actions (list terminated by the END action).
5170  * @param[in] flow_split_info
5171  *   Pointer to flow split info structure.
5172  * @param[out] error
5173  *   Perform verbose error reporting if not NULL.
5174  * @return
5175  *   0 on success, negative value otherwise
5176  */
5177 static int
5178 flow_create_split_meter(struct rte_eth_dev *dev,
5179                         struct rte_flow *flow,
5180                         const struct rte_flow_attr *attr,
5181                         const struct rte_flow_item items[],
5182                         const struct rte_flow_action actions[],
5183                         struct mlx5_flow_split_info *flow_split_info,
5184                         struct rte_flow_error *error)
5185 {
5186         struct mlx5_priv *priv = dev->data->dev_private;
5187         struct rte_flow_action *sfx_actions = NULL;
5188         struct rte_flow_action *pre_actions = NULL;
5189         struct rte_flow_item *sfx_items = NULL;
5190         struct mlx5_flow *dev_flow = NULL;
5191         struct rte_flow_attr sfx_attr = *attr;
5192         uint32_t mtr = 0;
5193         uint32_t mtr_tag_id = 0;
5194         size_t act_size;
5195         size_t item_size;
5196         int actions_n = 0;
5197         int ret;
5198
5199         if (priv->mtr_en)
5200                 actions_n = flow_check_meter_action(actions, &mtr);
5201         if (mtr) {
5202                 /* The five prefix actions: meter, decap, encap, tag, end. */
5203                 act_size = sizeof(struct rte_flow_action) * (actions_n + 5) +
5204                            sizeof(struct mlx5_rte_flow_action_set_tag);
5205                 /* tag, vlan, port id, end. */
5206 #define METER_SUFFIX_ITEM 4
5207                 item_size = sizeof(struct rte_flow_item) * METER_SUFFIX_ITEM +
5208                             sizeof(struct mlx5_rte_flow_item_tag) * 2;
5209                 sfx_actions = mlx5_malloc(MLX5_MEM_ZERO, (act_size + item_size),
5210                                           0, SOCKET_ID_ANY);
5211                 if (!sfx_actions)
5212                         return rte_flow_error_set(error, ENOMEM,
5213                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5214                                                   NULL, "no memory to split "
5215                                                   "meter flow");
5216                 sfx_items = (struct rte_flow_item *)((char *)sfx_actions +
5217                              act_size);
5218                 pre_actions = sfx_actions + actions_n;
5219                 mtr_tag_id = flow_meter_split_prep(dev, items, sfx_items,
5220                                                    actions, sfx_actions,
5221                                                    pre_actions);
5222                 if (!mtr_tag_id) {
5223                         ret = -rte_errno;
5224                         goto exit;
5225                 }
5226                 /* Add the prefix subflow. */
5227                 flow_split_info->prefix_mark = 0;
5228                 ret = flow_create_split_inner(dev, flow, &dev_flow,
5229                                               attr, items, pre_actions,
5230                                               flow_split_info, error);
5231                 if (ret) {
5232                         ret = -rte_errno;
5233                         goto exit;
5234                 }
5235                 dev_flow->handle->split_flow_id = mtr_tag_id;
5236                 /* Setting the sfx group atrr. */
5237                 sfx_attr.group = sfx_attr.transfer ?
5238                                 (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
5239                                  MLX5_FLOW_TABLE_LEVEL_SUFFIX;
5240                 flow_split_info->prefix_layers =
5241                                 flow_get_prefix_layer_flags(dev_flow);
5242                 flow_split_info->prefix_mark = dev_flow->handle->mark;
5243         }
5244         /* Add the prefix subflow. */
5245         ret = flow_create_split_metadata(dev, flow,
5246                                          &sfx_attr, sfx_items ?
5247                                          sfx_items : items,
5248                                          sfx_actions ? sfx_actions : actions,
5249                                          flow_split_info, error);
5250 exit:
5251         if (sfx_actions)
5252                 mlx5_free(sfx_actions);
5253         return ret;
5254 }
5255
5256 /**
5257  * The splitting for sample feature.
5258  *
5259  * Once Sample action is detected in the action list, the flow actions should
5260  * be split into prefix sub flow and suffix sub flow.
5261  *
5262  * The original items remain in the prefix sub flow, all actions preceding the
5263  * sample action and the sample action itself will be copied to the prefix
5264  * sub flow, the actions following the sample action will be copied to the
5265  * suffix sub flow, Queue action always be located in the suffix sub flow.
5266  *
5267  * In order to make the packet from prefix sub flow matches with suffix sub
5268  * flow, an extra tag action be added into prefix sub flow, and the suffix sub
5269  * flow uses tag item with the unique flow id.
5270  *
5271  * @param dev
5272  *   Pointer to Ethernet device.
5273  * @param[in] flow
5274  *   Parent flow structure pointer.
5275  * @param[in] attr
5276  *   Flow rule attributes.
5277  * @param[in] items
5278  *   Pattern specification (list terminated by the END pattern item).
5279  * @param[in] actions
5280  *   Associated actions (list terminated by the END action).
5281  * @param[in] flow_split_info
5282  *   Pointer to flow split info structure.
5283  * @param[out] error
5284  *   Perform verbose error reporting if not NULL.
5285  * @return
5286  *   0 on success, negative value otherwise
5287  */
5288 static int
5289 flow_create_split_sample(struct rte_eth_dev *dev,
5290                          struct rte_flow *flow,
5291                          const struct rte_flow_attr *attr,
5292                          const struct rte_flow_item items[],
5293                          const struct rte_flow_action actions[],
5294                          struct mlx5_flow_split_info *flow_split_info,
5295                          struct rte_flow_error *error)
5296 {
5297         struct mlx5_priv *priv = dev->data->dev_private;
5298         struct rte_flow_action *sfx_actions = NULL;
5299         struct rte_flow_action *pre_actions = NULL;
5300         struct rte_flow_item *sfx_items = NULL;
5301         struct mlx5_flow *dev_flow = NULL;
5302         struct rte_flow_attr sfx_attr = *attr;
5303 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
5304         struct mlx5_flow_dv_sample_resource *sample_res;
5305         struct mlx5_flow_tbl_data_entry *sfx_tbl_data;
5306         struct mlx5_flow_tbl_resource *sfx_tbl;
5307 #endif
5308         size_t act_size;
5309         size_t item_size;
5310         uint32_t fdb_tx = 0;
5311         int32_t tag_id = 0;
5312         int actions_n = 0;
5313         int sample_action_pos;
5314         int qrss_action_pos;
5315         int add_tag = 0;
5316         int modify_after_mirror = 0;
5317         uint16_t jump_table = 0;
5318         const uint32_t next_ft_step = 1;
5319         int ret = 0;
5320
5321         if (priv->sampler_en)
5322                 actions_n = flow_check_match_action(actions, attr,
5323                                         RTE_FLOW_ACTION_TYPE_SAMPLE,
5324                                         &sample_action_pos, &qrss_action_pos,
5325                                         &modify_after_mirror);
5326         if (actions_n) {
5327                 /* The prefix actions must includes sample, tag, end. */
5328                 act_size = sizeof(struct rte_flow_action) * (actions_n * 2 + 1)
5329                            + sizeof(struct mlx5_rte_flow_action_set_tag);
5330                 item_size = sizeof(struct rte_flow_item) * SAMPLE_SUFFIX_ITEM +
5331                             sizeof(struct mlx5_rte_flow_item_tag) * 2;
5332                 sfx_actions = mlx5_malloc(MLX5_MEM_ZERO, (act_size +
5333                                           item_size), 0, SOCKET_ID_ANY);
5334                 if (!sfx_actions)
5335                         return rte_flow_error_set(error, ENOMEM,
5336                                                   RTE_FLOW_ERROR_TYPE_ACTION,
5337                                                   NULL, "no memory to split "
5338                                                   "sample flow");
5339                 /* The representor_id is -1 for uplink. */
5340                 fdb_tx = (attr->transfer && priv->representor_id != -1);
5341                 /*
5342                  * When reg_c_preserve is set, metadata registers Cx preserve
5343                  * their value even through packet duplication.
5344                  */
5345                 add_tag = (!fdb_tx || priv->config.hca_attr.reg_c_preserve);
5346                 if (add_tag)
5347                         sfx_items = (struct rte_flow_item *)((char *)sfx_actions
5348                                         + act_size);
5349                 if (modify_after_mirror)
5350                         jump_table = attr->group * MLX5_FLOW_TABLE_FACTOR +
5351                                      next_ft_step;
5352                 pre_actions = sfx_actions + actions_n;
5353                 tag_id = flow_sample_split_prep(dev, add_tag, sfx_items,
5354                                                 actions, sfx_actions,
5355                                                 pre_actions, actions_n,
5356                                                 sample_action_pos,
5357                                                 qrss_action_pos, jump_table,
5358                                                 error);
5359                 if (tag_id < 0 || (add_tag && !tag_id)) {
5360                         ret = -rte_errno;
5361                         goto exit;
5362                 }
5363                 if (modify_after_mirror)
5364                         flow_split_info->skip_scale =
5365                                         1 << MLX5_SCALE_JUMP_FLOW_GROUP_BIT;
5366                 /* Add the prefix subflow. */
5367                 ret = flow_create_split_inner(dev, flow, &dev_flow, attr,
5368                                               items, pre_actions,
5369                                               flow_split_info, error);
5370                 if (ret) {
5371                         ret = -rte_errno;
5372                         goto exit;
5373                 }
5374                 dev_flow->handle->split_flow_id = tag_id;
5375 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
5376                 if (!modify_after_mirror) {
5377                         /* Set the sfx group attr. */
5378                         sample_res = (struct mlx5_flow_dv_sample_resource *)
5379                                                 dev_flow->dv.sample_res;
5380                         sfx_tbl = (struct mlx5_flow_tbl_resource *)
5381                                                 sample_res->normal_path_tbl;
5382                         sfx_tbl_data = container_of(sfx_tbl,
5383                                                 struct mlx5_flow_tbl_data_entry,
5384                                                 tbl);
5385                         sfx_attr.group = sfx_attr.transfer ?
5386                                                 (sfx_tbl_data->table_id - 1) :
5387                                                 sfx_tbl_data->table_id;
5388                 } else {
5389                         MLX5_ASSERT(attr->transfer);
5390                         sfx_attr.group = jump_table;
5391                 }
5392                 flow_split_info->prefix_layers =
5393                                 flow_get_prefix_layer_flags(dev_flow);
5394                 flow_split_info->prefix_mark = dev_flow->handle->mark;
5395                 /* Suffix group level already be scaled with factor, set
5396                  * MLX5_SCALE_FLOW_GROUP_BIT of skip_scale to 1 to avoid scale
5397                  * again in translation.
5398                  */
5399                 flow_split_info->skip_scale = 1 << MLX5_SCALE_FLOW_GROUP_BIT;
5400 #endif
5401         }
5402         /* Add the suffix subflow. */
5403         ret = flow_create_split_meter(dev, flow, &sfx_attr,
5404                                       sfx_items ? sfx_items : items,
5405                                       sfx_actions ? sfx_actions : actions,
5406                                       flow_split_info, error);
5407 exit:
5408         if (sfx_actions)
5409                 mlx5_free(sfx_actions);
5410         return ret;
5411 }
5412
5413 /**
5414  * Split the flow to subflow set. The splitters might be linked
5415  * in the chain, like this:
5416  * flow_create_split_outer() calls:
5417  *   flow_create_split_meter() calls:
5418  *     flow_create_split_metadata(meter_subflow_0) calls:
5419  *       flow_create_split_inner(metadata_subflow_0)
5420  *       flow_create_split_inner(metadata_subflow_1)
5421  *       flow_create_split_inner(metadata_subflow_2)
5422  *     flow_create_split_metadata(meter_subflow_1) calls:
5423  *       flow_create_split_inner(metadata_subflow_0)
5424  *       flow_create_split_inner(metadata_subflow_1)
5425  *       flow_create_split_inner(metadata_subflow_2)
5426  *
5427  * This provide flexible way to add new levels of flow splitting.
5428  * The all of successfully created subflows are included to the
5429  * parent flow dev_flow list.
5430  *
5431  * @param dev
5432  *   Pointer to Ethernet device.
5433  * @param[in] flow
5434  *   Parent flow structure pointer.
5435  * @param[in] attr
5436  *   Flow rule attributes.
5437  * @param[in] items
5438  *   Pattern specification (list terminated by the END pattern item).
5439  * @param[in] actions
5440  *   Associated actions (list terminated by the END action).
5441  * @param[in] flow_split_info
5442  *   Pointer to flow split info structure.
5443  * @param[out] error
5444  *   Perform verbose error reporting if not NULL.
5445  * @return
5446  *   0 on success, negative value otherwise
5447  */
5448 static int
5449 flow_create_split_outer(struct rte_eth_dev *dev,
5450                         struct rte_flow *flow,
5451                         const struct rte_flow_attr *attr,
5452                         const struct rte_flow_item items[],
5453                         const struct rte_flow_action actions[],
5454                         struct mlx5_flow_split_info *flow_split_info,
5455                         struct rte_flow_error *error)
5456 {
5457         int ret;
5458
5459         ret = flow_create_split_sample(dev, flow, attr, items,
5460                                        actions, flow_split_info, error);
5461         MLX5_ASSERT(ret <= 0);
5462         return ret;
5463 }
5464
5465 static struct mlx5_flow_tunnel *
5466 flow_tunnel_from_rule(struct rte_eth_dev *dev,
5467                       const struct rte_flow_attr *attr,
5468                       const struct rte_flow_item items[],
5469                       const struct rte_flow_action actions[])
5470 {
5471         struct mlx5_flow_tunnel *tunnel;
5472
5473 #pragma GCC diagnostic push
5474 #pragma GCC diagnostic ignored "-Wcast-qual"
5475         if (is_flow_tunnel_match_rule(dev, attr, items, actions))
5476                 tunnel = (struct mlx5_flow_tunnel *)items[0].spec;
5477         else if (is_flow_tunnel_steer_rule(dev, attr, items, actions))
5478                 tunnel = (struct mlx5_flow_tunnel *)actions[0].conf;
5479         else
5480                 tunnel = NULL;
5481 #pragma GCC diagnostic pop
5482
5483         return tunnel;
5484 }
5485
5486 /**
5487  * Adjust flow RSS workspace if needed.
5488  *
5489  * @param wks
5490  *   Pointer to thread flow work space.
5491  * @param rss_desc
5492  *   Pointer to RSS descriptor.
5493  * @param[in] nrssq_num
5494  *   New RSS queue number.
5495  *
5496  * @return
5497  *   0 on success, -1 otherwise and rte_errno is set.
5498  */
5499 static int
5500 flow_rss_workspace_adjust(struct mlx5_flow_workspace *wks,
5501                           struct mlx5_flow_rss_desc *rss_desc,
5502                           uint32_t nrssq_num)
5503 {
5504         if (likely(nrssq_num <= wks->rssq_num))
5505                 return 0;
5506         rss_desc->queue = realloc(rss_desc->queue,
5507                           sizeof(*rss_desc->queue) * RTE_ALIGN(nrssq_num, 2));
5508         if (!rss_desc->queue) {
5509                 rte_errno = ENOMEM;
5510                 return -1;
5511         }
5512         wks->rssq_num = RTE_ALIGN(nrssq_num, 2);
5513         return 0;
5514 }
5515
5516 /**
5517  * Create a flow and add it to @p list.
5518  *
5519  * @param dev
5520  *   Pointer to Ethernet device.
5521  * @param list
5522  *   Pointer to a TAILQ flow list. If this parameter NULL,
5523  *   no list insertion occurred, flow is just created,
5524  *   this is caller's responsibility to track the
5525  *   created flow.
5526  * @param[in] attr
5527  *   Flow rule attributes.
5528  * @param[in] items
5529  *   Pattern specification (list terminated by the END pattern item).
5530  * @param[in] actions
5531  *   Associated actions (list terminated by the END action).
5532  * @param[in] external
5533  *   This flow rule is created by request external to PMD.
5534  * @param[out] error
5535  *   Perform verbose error reporting if not NULL.
5536  *
5537  * @return
5538  *   A flow index on success, 0 otherwise and rte_errno is set.
5539  */
5540 static uint32_t
5541 flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
5542                  const struct rte_flow_attr *attr,
5543                  const struct rte_flow_item items[],
5544                  const struct rte_flow_action original_actions[],
5545                  bool external, struct rte_flow_error *error)
5546 {
5547         struct mlx5_priv *priv = dev->data->dev_private;
5548         struct rte_flow *flow = NULL;
5549         struct mlx5_flow *dev_flow;
5550         const struct rte_flow_action_rss *rss = NULL;
5551         struct mlx5_translated_action_handle
5552                 indir_actions[MLX5_MAX_INDIRECT_ACTIONS];
5553         int indir_actions_n = MLX5_MAX_INDIRECT_ACTIONS;
5554         union {
5555                 struct mlx5_flow_expand_rss buf;
5556                 uint8_t buffer[2048];
5557         } expand_buffer;
5558         union {
5559                 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
5560                 uint8_t buffer[2048];
5561         } actions_rx;
5562         union {
5563                 struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
5564                 uint8_t buffer[2048];
5565         } actions_hairpin_tx;
5566         union {
5567                 struct rte_flow_item items[MLX5_MAX_SPLIT_ITEMS];
5568                 uint8_t buffer[2048];
5569         } items_tx;
5570         struct mlx5_flow_expand_rss *buf = &expand_buffer.buf;
5571         struct mlx5_flow_rss_desc *rss_desc;
5572         const struct rte_flow_action *p_actions_rx;
5573         uint32_t i;
5574         uint32_t idx = 0;
5575         int hairpin_flow;
5576         struct rte_flow_attr attr_tx = { .priority = 0 };
5577         const struct rte_flow_action *actions;
5578         struct rte_flow_action *translated_actions = NULL;
5579         struct mlx5_flow_tunnel *tunnel;
5580         struct tunnel_default_miss_ctx default_miss_ctx = { 0, };
5581         struct mlx5_flow_workspace *wks = mlx5_flow_push_thread_workspace();
5582         struct mlx5_flow_split_info flow_split_info = {
5583                 .external = !!external,
5584                 .skip_scale = 0,
5585                 .flow_idx = 0,
5586                 .prefix_mark = 0,
5587                 .prefix_layers = 0
5588         };
5589         int ret;
5590
5591         MLX5_ASSERT(wks);
5592         rss_desc = &wks->rss_desc;
5593         ret = flow_action_handles_translate(dev, original_actions,
5594                                             indir_actions,
5595                                             &indir_actions_n,
5596                                             &translated_actions, error);
5597         if (ret < 0) {
5598                 MLX5_ASSERT(translated_actions == NULL);
5599                 return 0;
5600         }
5601         actions = translated_actions ? translated_actions : original_actions;
5602         p_actions_rx = actions;
5603         hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
5604         ret = flow_drv_validate(dev, attr, items, p_actions_rx,
5605                                 external, hairpin_flow, error);
5606         if (ret < 0)
5607                 goto error_before_hairpin_split;
5608         flow = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], &idx);
5609         if (!flow) {
5610                 rte_errno = ENOMEM;
5611                 goto error_before_hairpin_split;
5612         }
5613         if (hairpin_flow > 0) {
5614                 if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
5615                         rte_errno = EINVAL;
5616                         goto error_before_hairpin_split;
5617                 }
5618                 flow_hairpin_split(dev, actions, actions_rx.actions,
5619                                    actions_hairpin_tx.actions, items_tx.items,
5620                                    idx);
5621                 p_actions_rx = actions_rx.actions;
5622         }
5623         flow_split_info.flow_idx = idx;
5624         flow->drv_type = flow_get_drv_type(dev, attr);
5625         MLX5_ASSERT(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
5626                     flow->drv_type < MLX5_FLOW_TYPE_MAX);
5627         memset(rss_desc, 0, offsetof(struct mlx5_flow_rss_desc, queue));
5628         /* RSS Action only works on NIC RX domain */
5629         if (attr->ingress && !attr->transfer)
5630                 rss = flow_get_rss_action(p_actions_rx);
5631         if (rss) {
5632                 if (flow_rss_workspace_adjust(wks, rss_desc, rss->queue_num))
5633                         return 0;
5634                 /*
5635                  * The following information is required by
5636                  * mlx5_flow_hashfields_adjust() in advance.
5637                  */
5638                 rss_desc->level = rss->level;
5639                 /* RSS type 0 indicates default RSS type (ETH_RSS_IP). */
5640                 rss_desc->types = !rss->types ? ETH_RSS_IP : rss->types;
5641         }
5642         flow->dev_handles = 0;
5643         if (rss && rss->types) {
5644                 unsigned int graph_root;
5645
5646                 graph_root = find_graph_root(items, rss->level);
5647                 ret = mlx5_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
5648                                            items, rss->types,
5649                                            mlx5_support_expansion, graph_root);
5650                 MLX5_ASSERT(ret > 0 &&
5651                        (unsigned int)ret < sizeof(expand_buffer.buffer));
5652         } else {
5653                 buf->entries = 1;
5654                 buf->entry[0].pattern = (void *)(uintptr_t)items;
5655         }
5656         rss_desc->shared_rss = flow_get_shared_rss_action(dev, indir_actions,
5657                                                       indir_actions_n);
5658         for (i = 0; i < buf->entries; ++i) {
5659                 /* Initialize flow split data. */
5660                 flow_split_info.prefix_layers = 0;
5661                 flow_split_info.prefix_mark = 0;
5662                 flow_split_info.skip_scale = 0;
5663                 /*
5664                  * The splitter may create multiple dev_flows,
5665                  * depending on configuration. In the simplest
5666                  * case it just creates unmodified original flow.
5667                  */
5668                 ret = flow_create_split_outer(dev, flow, attr,
5669                                               buf->entry[i].pattern,
5670                                               p_actions_rx, &flow_split_info,
5671                                               error);
5672                 if (ret < 0)
5673                         goto error;
5674                 if (is_flow_tunnel_steer_rule(dev, attr,
5675                                               buf->entry[i].pattern,
5676                                               p_actions_rx)) {
5677                         ret = flow_tunnel_add_default_miss(dev, flow, attr,
5678                                                            p_actions_rx,
5679                                                            idx,
5680                                                            &default_miss_ctx,
5681                                                            error);
5682                         if (ret < 0) {
5683                                 mlx5_free(default_miss_ctx.queue);
5684                                 goto error;
5685                         }
5686                 }
5687         }
5688         /* Create the tx flow. */
5689         if (hairpin_flow) {
5690                 attr_tx.group = MLX5_HAIRPIN_TX_TABLE;
5691                 attr_tx.ingress = 0;
5692                 attr_tx.egress = 1;
5693                 dev_flow = flow_drv_prepare(dev, flow, &attr_tx, items_tx.items,
5694                                          actions_hairpin_tx.actions,
5695                                          idx, error);
5696                 if (!dev_flow)
5697                         goto error;
5698                 dev_flow->flow = flow;
5699                 dev_flow->external = 0;
5700                 SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
5701                               dev_flow->handle, next);
5702                 ret = flow_drv_translate(dev, dev_flow, &attr_tx,
5703                                          items_tx.items,
5704                                          actions_hairpin_tx.actions, error);
5705                 if (ret < 0)
5706                         goto error;
5707         }
5708         /*
5709          * Update the metadata register copy table. If extensive
5710          * metadata feature is enabled and registers are supported
5711          * we might create the extra rte_flow for each unique
5712          * MARK/FLAG action ID.
5713          *
5714          * The table is updated for ingress Flows only, because
5715          * the egress Flows belong to the different device and
5716          * copy table should be updated in peer NIC Rx domain.
5717          */
5718         if (attr->ingress &&
5719             (external || attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP)) {
5720                 ret = flow_mreg_update_copy_table(dev, flow, actions, error);
5721                 if (ret)
5722                         goto error;
5723         }
5724         /*
5725          * If the flow is external (from application) OR device is started,
5726          * OR mreg discover, then apply immediately.
5727          */
5728         if (external || dev->data->dev_started ||
5729             (attr->group == MLX5_FLOW_MREG_CP_TABLE_GROUP &&
5730              attr->priority == MLX5_FLOW_LOWEST_PRIO_INDICATOR)) {
5731                 ret = flow_drv_apply(dev, flow, error);
5732                 if (ret < 0)
5733                         goto error;
5734         }
5735         if (list) {
5736                 rte_spinlock_lock(&priv->flow_list_lock);
5737                 ILIST_INSERT(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], list, idx,
5738                              flow, next);
5739                 rte_spinlock_unlock(&priv->flow_list_lock);
5740         }
5741         flow_rxq_flags_set(dev, flow);
5742         rte_free(translated_actions);
5743         tunnel = flow_tunnel_from_rule(dev, attr, items, actions);
5744         if (tunnel) {
5745                 flow->tunnel = 1;
5746                 flow->tunnel_id = tunnel->tunnel_id;
5747                 __atomic_add_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED);
5748                 mlx5_free(default_miss_ctx.queue);
5749         }
5750         mlx5_flow_pop_thread_workspace();
5751         return idx;
5752 error:
5753         MLX5_ASSERT(flow);
5754         ret = rte_errno; /* Save rte_errno before cleanup. */
5755         flow_mreg_del_copy_action(dev, flow);
5756         flow_drv_destroy(dev, flow);
5757         if (rss_desc->shared_rss)
5758                 __atomic_sub_fetch(&((struct mlx5_shared_action_rss *)
5759                         mlx5_ipool_get
5760                         (priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
5761                         rss_desc->shared_rss))->refcnt, 1, __ATOMIC_RELAXED);
5762         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], idx);
5763         rte_errno = ret; /* Restore rte_errno. */
5764         ret = rte_errno;
5765         rte_errno = ret;
5766         mlx5_flow_pop_thread_workspace();
5767 error_before_hairpin_split:
5768         rte_free(translated_actions);
5769         return 0;
5770 }
5771
5772 /**
5773  * Create a dedicated flow rule on e-switch table 0 (root table), to direct all
5774  * incoming packets to table 1.
5775  *
5776  * Other flow rules, requested for group n, will be created in
5777  * e-switch table n+1.
5778  * Jump action to e-switch group n will be created to group n+1.
5779  *
5780  * Used when working in switchdev mode, to utilise advantages of table 1
5781  * and above.
5782  *
5783  * @param dev
5784  *   Pointer to Ethernet device.
5785  *
5786  * @return
5787  *   Pointer to flow on success, NULL otherwise and rte_errno is set.
5788  */
5789 struct rte_flow *
5790 mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev)
5791 {
5792         const struct rte_flow_attr attr = {
5793                 .group = 0,
5794                 .priority = 0,
5795                 .ingress = 1,
5796                 .egress = 0,
5797                 .transfer = 1,
5798         };
5799         const struct rte_flow_item pattern = {
5800                 .type = RTE_FLOW_ITEM_TYPE_END,
5801         };
5802         struct rte_flow_action_jump jump = {
5803                 .group = 1,
5804         };
5805         const struct rte_flow_action actions[] = {
5806                 {
5807                         .type = RTE_FLOW_ACTION_TYPE_JUMP,
5808                         .conf = &jump,
5809                 },
5810                 {
5811                         .type = RTE_FLOW_ACTION_TYPE_END,
5812                 },
5813         };
5814         struct mlx5_priv *priv = dev->data->dev_private;
5815         struct rte_flow_error error;
5816
5817         return (void *)(uintptr_t)flow_list_create(dev, &priv->ctrl_flows,
5818                                                    &attr, &pattern,
5819                                                    actions, false, &error);
5820 }
5821
5822 /**
5823  * Validate a flow supported by the NIC.
5824  *
5825  * @see rte_flow_validate()
5826  * @see rte_flow_ops
5827  */
5828 int
5829 mlx5_flow_validate(struct rte_eth_dev *dev,
5830                    const struct rte_flow_attr *attr,
5831                    const struct rte_flow_item items[],
5832                    const struct rte_flow_action original_actions[],
5833                    struct rte_flow_error *error)
5834 {
5835         int hairpin_flow;
5836         struct mlx5_translated_action_handle
5837                 indir_actions[MLX5_MAX_INDIRECT_ACTIONS];
5838         int indir_actions_n = MLX5_MAX_INDIRECT_ACTIONS;
5839         const struct rte_flow_action *actions;
5840         struct rte_flow_action *translated_actions = NULL;
5841         int ret = flow_action_handles_translate(dev, original_actions,
5842                                                 indir_actions,
5843                                                 &indir_actions_n,
5844                                                 &translated_actions, error);
5845
5846         if (ret)
5847                 return ret;
5848         actions = translated_actions ? translated_actions : original_actions;
5849         hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
5850         ret = flow_drv_validate(dev, attr, items, actions,
5851                                 true, hairpin_flow, error);
5852         rte_free(translated_actions);
5853         return ret;
5854 }
5855
5856 /**
5857  * Create a flow.
5858  *
5859  * @see rte_flow_create()
5860  * @see rte_flow_ops
5861  */
5862 struct rte_flow *
5863 mlx5_flow_create(struct rte_eth_dev *dev,
5864                  const struct rte_flow_attr *attr,
5865                  const struct rte_flow_item items[],
5866                  const struct rte_flow_action actions[],
5867                  struct rte_flow_error *error)
5868 {
5869         struct mlx5_priv *priv = dev->data->dev_private;
5870
5871         /*
5872          * If the device is not started yet, it is not allowed to created a
5873          * flow from application. PMD default flows and traffic control flows
5874          * are not affected.
5875          */
5876         if (unlikely(!dev->data->dev_started)) {
5877                 DRV_LOG(DEBUG, "port %u is not started when "
5878                         "inserting a flow", dev->data->port_id);
5879                 rte_flow_error_set(error, ENODEV,
5880                                    RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
5881                                    NULL,
5882                                    "port not started");
5883                 return NULL;
5884         }
5885
5886         return (void *)(uintptr_t)flow_list_create(dev, &priv->flows,
5887                                   attr, items, actions, true, error);
5888 }
5889
5890 /**
5891  * Destroy a flow in a list.
5892  *
5893  * @param dev
5894  *   Pointer to Ethernet device.
5895  * @param list
5896  *   Pointer to the Indexed flow list. If this parameter NULL,
5897  *   there is no flow removal from the list. Be noted that as
5898  *   flow is add to the indexed list, memory of the indexed
5899  *   list points to maybe changed as flow destroyed.
5900  * @param[in] flow_idx
5901  *   Index of flow to destroy.
5902  */
5903 static void
5904 flow_list_destroy(struct rte_eth_dev *dev, uint32_t *list,
5905                   uint32_t flow_idx)
5906 {
5907         struct mlx5_priv *priv = dev->data->dev_private;
5908         struct rte_flow *flow = mlx5_ipool_get(priv->sh->ipool
5909                                                [MLX5_IPOOL_RTE_FLOW], flow_idx);
5910
5911         if (!flow)
5912                 return;
5913         /*
5914          * Update RX queue flags only if port is started, otherwise it is
5915          * already clean.
5916          */
5917         if (dev->data->dev_started)
5918                 flow_rxq_flags_trim(dev, flow);
5919         flow_drv_destroy(dev, flow);
5920         if (list) {
5921                 rte_spinlock_lock(&priv->flow_list_lock);
5922                 ILIST_REMOVE(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], list,
5923                              flow_idx, flow, next);
5924                 rte_spinlock_unlock(&priv->flow_list_lock);
5925         }
5926         if (flow->tunnel) {
5927                 struct mlx5_flow_tunnel *tunnel;
5928
5929                 tunnel = mlx5_find_tunnel_id(dev, flow->tunnel_id);
5930                 RTE_VERIFY(tunnel);
5931                 if (!__atomic_sub_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED))
5932                         mlx5_flow_tunnel_free(dev, tunnel);
5933         }
5934         flow_mreg_del_copy_action(dev, flow);
5935         mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], flow_idx);
5936 }
5937
5938 /**
5939  * Destroy all flows.
5940  *
5941  * @param dev
5942  *   Pointer to Ethernet device.
5943  * @param list
5944  *   Pointer to the Indexed flow list.
5945  * @param active
5946  *   If flushing is called avtively.
5947  */
5948 void
5949 mlx5_flow_list_flush(struct rte_eth_dev *dev, uint32_t *list, bool active)
5950 {
5951         uint32_t num_flushed = 0;
5952
5953         while (*list) {
5954                 flow_list_destroy(dev, list, *list);
5955                 num_flushed++;
5956         }
5957         if (active) {
5958                 DRV_LOG(INFO, "port %u: %u flows flushed before stopping",
5959                         dev->data->port_id, num_flushed);
5960         }
5961 }
5962
5963 /**
5964  * Stop all default actions for flows.
5965  *
5966  * @param dev
5967  *   Pointer to Ethernet device.
5968  */
5969 void
5970 mlx5_flow_stop_default(struct rte_eth_dev *dev)
5971 {
5972         flow_mreg_del_default_copy_action(dev);
5973         flow_rxq_flags_clear(dev);
5974 }
5975
5976 /**
5977  * Start all default actions for flows.
5978  *
5979  * @param dev
5980  *   Pointer to Ethernet device.
5981  * @return
5982  *   0 on success, a negative errno value otherwise and rte_errno is set.
5983  */
5984 int
5985 mlx5_flow_start_default(struct rte_eth_dev *dev)
5986 {
5987         struct rte_flow_error error;
5988
5989         /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
5990         return flow_mreg_add_default_copy_action(dev, &error);
5991 }
5992
5993 /**
5994  * Release key of thread specific flow workspace data.
5995  */
5996 void
5997 flow_release_workspace(void *data)
5998 {
5999         struct mlx5_flow_workspace *wks = data;
6000         struct mlx5_flow_workspace *next;
6001
6002         while (wks) {
6003                 next = wks->next;
6004                 free(wks->rss_desc.queue);
6005                 free(wks);
6006                 wks = next;
6007         }
6008 }
6009
6010 /**
6011  * Get thread specific current flow workspace.
6012  *
6013  * @return pointer to thread specific flow workspace data, NULL on error.
6014  */
6015 struct mlx5_flow_workspace*
6016 mlx5_flow_get_thread_workspace(void)
6017 {
6018         struct mlx5_flow_workspace *data;
6019
6020         data = mlx5_flow_os_get_specific_workspace();
6021         MLX5_ASSERT(data && data->inuse);
6022         if (!data || !data->inuse)
6023                 DRV_LOG(ERR, "flow workspace not initialized.");
6024         return data;
6025 }
6026
6027 /**
6028  * Allocate and init new flow workspace.
6029  *
6030  * @return pointer to flow workspace data, NULL on error.
6031  */
6032 static struct mlx5_flow_workspace*
6033 flow_alloc_thread_workspace(void)
6034 {
6035         struct mlx5_flow_workspace *data = calloc(1, sizeof(*data));
6036
6037         if (!data) {
6038                 DRV_LOG(ERR, "Failed to allocate flow workspace "
6039                         "memory.");
6040                 return NULL;
6041         }
6042         data->rss_desc.queue = calloc(1,
6043                         sizeof(uint16_t) * MLX5_RSSQ_DEFAULT_NUM);
6044         if (!data->rss_desc.queue)
6045                 goto err;
6046         data->rssq_num = MLX5_RSSQ_DEFAULT_NUM;
6047         return data;
6048 err:
6049         if (data->rss_desc.queue)
6050                 free(data->rss_desc.queue);
6051         free(data);
6052         return NULL;
6053 }
6054
6055 /**
6056  * Get new thread specific flow workspace.
6057  *
6058  * If current workspace inuse, create new one and set as current.
6059  *
6060  * @return pointer to thread specific flow workspace data, NULL on error.
6061  */
6062 static struct mlx5_flow_workspace*
6063 mlx5_flow_push_thread_workspace(void)
6064 {
6065         struct mlx5_flow_workspace *curr;
6066         struct mlx5_flow_workspace *data;
6067
6068         curr = mlx5_flow_os_get_specific_workspace();
6069         if (!curr) {
6070                 data = flow_alloc_thread_workspace();
6071                 if (!data)
6072                         return NULL;
6073         } else if (!curr->inuse) {
6074                 data = curr;
6075         } else if (curr->next) {
6076                 data = curr->next;
6077         } else {
6078                 data = flow_alloc_thread_workspace();
6079                 if (!data)
6080                         return NULL;
6081                 curr->next = data;
6082                 data->prev = curr;
6083         }
6084         data->inuse = 1;
6085         data->flow_idx = 0;
6086         /* Set as current workspace */
6087         if (mlx5_flow_os_set_specific_workspace(data))
6088                 DRV_LOG(ERR, "Failed to set flow workspace to thread.");
6089         return data;
6090 }
6091
6092 /**
6093  * Close current thread specific flow workspace.
6094  *
6095  * If previous workspace available, set it as current.
6096  *
6097  * @return pointer to thread specific flow workspace data, NULL on error.
6098  */
6099 static void
6100 mlx5_flow_pop_thread_workspace(void)
6101 {
6102         struct mlx5_flow_workspace *data = mlx5_flow_get_thread_workspace();
6103
6104         if (!data)
6105                 return;
6106         if (!data->inuse) {
6107                 DRV_LOG(ERR, "Failed to close unused flow workspace.");
6108                 return;
6109         }
6110         data->inuse = 0;
6111         if (!data->prev)
6112                 return;
6113         if (mlx5_flow_os_set_specific_workspace(data->prev))
6114                 DRV_LOG(ERR, "Failed to set flow workspace to thread.");
6115 }
6116
6117 /**
6118  * Verify the flow list is empty
6119  *
6120  * @param dev
6121  *  Pointer to Ethernet device.
6122  *
6123  * @return the number of flows not released.
6124  */
6125 int
6126 mlx5_flow_verify(struct rte_eth_dev *dev)
6127 {
6128         struct mlx5_priv *priv = dev->data->dev_private;
6129         struct rte_flow *flow;
6130         uint32_t idx;
6131         int ret = 0;
6132
6133         ILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], priv->flows, idx,
6134                       flow, next) {
6135                 DRV_LOG(DEBUG, "port %u flow %p still referenced",
6136                         dev->data->port_id, (void *)flow);
6137                 ++ret;
6138         }
6139         return ret;
6140 }
6141
6142 /**
6143  * Enable default hairpin egress flow.
6144  *
6145  * @param dev
6146  *   Pointer to Ethernet device.
6147  * @param queue
6148  *   The queue index.
6149  *
6150  * @return
6151  *   0 on success, a negative errno value otherwise and rte_errno is set.
6152  */
6153 int
6154 mlx5_ctrl_flow_source_queue(struct rte_eth_dev *dev,
6155                             uint32_t queue)
6156 {
6157         struct mlx5_priv *priv = dev->data->dev_private;
6158         const struct rte_flow_attr attr = {
6159                 .egress = 1,
6160                 .priority = 0,
6161         };
6162         struct mlx5_rte_flow_item_tx_queue queue_spec = {
6163                 .queue = queue,
6164         };
6165         struct mlx5_rte_flow_item_tx_queue queue_mask = {
6166                 .queue = UINT32_MAX,
6167         };
6168         struct rte_flow_item items[] = {
6169                 {
6170                         .type = (enum rte_flow_item_type)
6171                                 MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE,
6172                         .spec = &queue_spec,
6173                         .last = NULL,
6174                         .mask = &queue_mask,
6175                 },
6176                 {
6177                         .type = RTE_FLOW_ITEM_TYPE_END,
6178                 },
6179         };
6180         struct rte_flow_action_jump jump = {
6181                 .group = MLX5_HAIRPIN_TX_TABLE,
6182         };
6183         struct rte_flow_action actions[2];
6184         uint32_t flow_idx;
6185         struct rte_flow_error error;
6186
6187         actions[0].type = RTE_FLOW_ACTION_TYPE_JUMP;
6188         actions[0].conf = &jump;
6189         actions[1].type = RTE_FLOW_ACTION_TYPE_END;
6190         flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6191                                 &attr, items, actions, false, &error);
6192         if (!flow_idx) {
6193                 DRV_LOG(DEBUG,
6194                         "Failed to create ctrl flow: rte_errno(%d),"
6195                         " type(%d), message(%s)",
6196                         rte_errno, error.type,
6197                         error.message ? error.message : " (no stated reason)");
6198                 return -rte_errno;
6199         }
6200         return 0;
6201 }
6202
6203 /**
6204  * Enable a control flow configured from the control plane.
6205  *
6206  * @param dev
6207  *   Pointer to Ethernet device.
6208  * @param eth_spec
6209  *   An Ethernet flow spec to apply.
6210  * @param eth_mask
6211  *   An Ethernet flow mask to apply.
6212  * @param vlan_spec
6213  *   A VLAN flow spec to apply.
6214  * @param vlan_mask
6215  *   A VLAN flow mask to apply.
6216  *
6217  * @return
6218  *   0 on success, a negative errno value otherwise and rte_errno is set.
6219  */
6220 int
6221 mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
6222                     struct rte_flow_item_eth *eth_spec,
6223                     struct rte_flow_item_eth *eth_mask,
6224                     struct rte_flow_item_vlan *vlan_spec,
6225                     struct rte_flow_item_vlan *vlan_mask)
6226 {
6227         struct mlx5_priv *priv = dev->data->dev_private;
6228         const struct rte_flow_attr attr = {
6229                 .ingress = 1,
6230                 .priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR,
6231         };
6232         struct rte_flow_item items[] = {
6233                 {
6234                         .type = RTE_FLOW_ITEM_TYPE_ETH,
6235                         .spec = eth_spec,
6236                         .last = NULL,
6237                         .mask = eth_mask,
6238                 },
6239                 {
6240                         .type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
6241                                               RTE_FLOW_ITEM_TYPE_END,
6242                         .spec = vlan_spec,
6243                         .last = NULL,
6244                         .mask = vlan_mask,
6245                 },
6246                 {
6247                         .type = RTE_FLOW_ITEM_TYPE_END,
6248                 },
6249         };
6250         uint16_t queue[priv->reta_idx_n];
6251         struct rte_flow_action_rss action_rss = {
6252                 .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
6253                 .level = 0,
6254                 .types = priv->rss_conf.rss_hf,
6255                 .key_len = priv->rss_conf.rss_key_len,
6256                 .queue_num = priv->reta_idx_n,
6257                 .key = priv->rss_conf.rss_key,
6258                 .queue = queue,
6259         };
6260         struct rte_flow_action actions[] = {
6261                 {
6262                         .type = RTE_FLOW_ACTION_TYPE_RSS,
6263                         .conf = &action_rss,
6264                 },
6265                 {
6266                         .type = RTE_FLOW_ACTION_TYPE_END,
6267                 },
6268         };
6269         uint32_t flow_idx;
6270         struct rte_flow_error error;
6271         unsigned int i;
6272
6273         if (!priv->reta_idx_n || !priv->rxqs_n) {
6274                 return 0;
6275         }
6276         if (!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG))
6277                 action_rss.types = 0;
6278         for (i = 0; i != priv->reta_idx_n; ++i)
6279                 queue[i] = (*priv->reta_idx)[i];
6280         flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6281                                 &attr, items, actions, false, &error);
6282         if (!flow_idx)
6283                 return -rte_errno;
6284         return 0;
6285 }
6286
6287 /**
6288  * Enable a flow control configured from the control plane.
6289  *
6290  * @param dev
6291  *   Pointer to Ethernet device.
6292  * @param eth_spec
6293  *   An Ethernet flow spec to apply.
6294  * @param eth_mask
6295  *   An Ethernet flow mask to apply.
6296  *
6297  * @return
6298  *   0 on success, a negative errno value otherwise and rte_errno is set.
6299  */
6300 int
6301 mlx5_ctrl_flow(struct rte_eth_dev *dev,
6302                struct rte_flow_item_eth *eth_spec,
6303                struct rte_flow_item_eth *eth_mask)
6304 {
6305         return mlx5_ctrl_flow_vlan(dev, eth_spec, eth_mask, NULL, NULL);
6306 }
6307
6308 /**
6309  * Create default miss flow rule matching lacp traffic
6310  *
6311  * @param dev
6312  *   Pointer to Ethernet device.
6313  * @param eth_spec
6314  *   An Ethernet flow spec to apply.
6315  *
6316  * @return
6317  *   0 on success, a negative errno value otherwise and rte_errno is set.
6318  */
6319 int
6320 mlx5_flow_lacp_miss(struct rte_eth_dev *dev)
6321 {
6322         struct mlx5_priv *priv = dev->data->dev_private;
6323         /*
6324          * The LACP matching is done by only using ether type since using
6325          * a multicast dst mac causes kernel to give low priority to this flow.
6326          */
6327         static const struct rte_flow_item_eth lacp_spec = {
6328                 .type = RTE_BE16(0x8809),
6329         };
6330         static const struct rte_flow_item_eth lacp_mask = {
6331                 .type = 0xffff,
6332         };
6333         const struct rte_flow_attr attr = {
6334                 .ingress = 1,
6335         };
6336         struct rte_flow_item items[] = {
6337                 {
6338                         .type = RTE_FLOW_ITEM_TYPE_ETH,
6339                         .spec = &lacp_spec,
6340                         .mask = &lacp_mask,
6341                 },
6342                 {
6343                         .type = RTE_FLOW_ITEM_TYPE_END,
6344                 },
6345         };
6346         struct rte_flow_action actions[] = {
6347                 {
6348                         .type = (enum rte_flow_action_type)
6349                                 MLX5_RTE_FLOW_ACTION_TYPE_DEFAULT_MISS,
6350                 },
6351                 {
6352                         .type = RTE_FLOW_ACTION_TYPE_END,
6353                 },
6354         };
6355         struct rte_flow_error error;
6356         uint32_t flow_idx = flow_list_create(dev, &priv->ctrl_flows,
6357                                 &attr, items, actions, false, &error);
6358
6359         if (!flow_idx)
6360                 return -rte_errno;
6361         return 0;
6362 }
6363
6364 /**
6365  * Destroy a flow.
6366  *
6367  * @see rte_flow_destroy()
6368  * @see rte_flow_ops
6369  */
6370 int
6371 mlx5_flow_destroy(struct rte_eth_dev *dev,
6372                   struct rte_flow *flow,
6373                   struct rte_flow_error *error __rte_unused)
6374 {
6375         struct mlx5_priv *priv = dev->data->dev_private;
6376
6377         flow_list_destroy(dev, &priv->flows, (uintptr_t)(void *)flow);
6378         return 0;
6379 }
6380
6381 /**
6382  * Destroy all flows.
6383  *
6384  * @see rte_flow_flush()
6385  * @see rte_flow_ops
6386  */
6387 int
6388 mlx5_flow_flush(struct rte_eth_dev *dev,
6389                 struct rte_flow_error *error __rte_unused)
6390 {
6391         struct mlx5_priv *priv = dev->data->dev_private;
6392
6393         mlx5_flow_list_flush(dev, &priv->flows, false);
6394         return 0;
6395 }
6396
6397 /**
6398  * Isolated mode.
6399  *
6400  * @see rte_flow_isolate()
6401  * @see rte_flow_ops
6402  */
6403 int
6404 mlx5_flow_isolate(struct rte_eth_dev *dev,
6405                   int enable,
6406                   struct rte_flow_error *error)
6407 {
6408         struct mlx5_priv *priv = dev->data->dev_private;
6409
6410         if (dev->data->dev_started) {
6411                 rte_flow_error_set(error, EBUSY,
6412                                    RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
6413                                    NULL,
6414                                    "port must be stopped first");
6415                 return -rte_errno;
6416         }
6417         priv->isolated = !!enable;
6418         if (enable)
6419                 dev->dev_ops = &mlx5_dev_ops_isolate;
6420         else
6421                 dev->dev_ops = &mlx5_dev_ops;
6422
6423         dev->rx_descriptor_status = mlx5_rx_descriptor_status;
6424         dev->tx_descriptor_status = mlx5_tx_descriptor_status;
6425
6426         return 0;
6427 }
6428
6429 /**
6430  * Query a flow.
6431  *
6432  * @see rte_flow_query()
6433  * @see rte_flow_ops
6434  */
6435 static int
6436 flow_drv_query(struct rte_eth_dev *dev,
6437                uint32_t flow_idx,
6438                const struct rte_flow_action *actions,
6439                void *data,
6440                struct rte_flow_error *error)
6441 {
6442         struct mlx5_priv *priv = dev->data->dev_private;
6443         const struct mlx5_flow_driver_ops *fops;
6444         struct rte_flow *flow = mlx5_ipool_get(priv->sh->ipool
6445                                                [MLX5_IPOOL_RTE_FLOW],
6446                                                flow_idx);
6447         enum mlx5_flow_drv_type ftype;
6448
6449         if (!flow) {
6450                 return rte_flow_error_set(error, ENOENT,
6451                           RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
6452                           NULL,
6453                           "invalid flow handle");
6454         }
6455         ftype = flow->drv_type;
6456         MLX5_ASSERT(ftype > MLX5_FLOW_TYPE_MIN && ftype < MLX5_FLOW_TYPE_MAX);
6457         fops = flow_get_drv_ops(ftype);
6458
6459         return fops->query(dev, flow, actions, data, error);
6460 }
6461
6462 /**
6463  * Query a flow.
6464  *
6465  * @see rte_flow_query()
6466  * @see rte_flow_ops
6467  */
6468 int
6469 mlx5_flow_query(struct rte_eth_dev *dev,
6470                 struct rte_flow *flow,
6471                 const struct rte_flow_action *actions,
6472                 void *data,
6473                 struct rte_flow_error *error)
6474 {
6475         int ret;
6476
6477         ret = flow_drv_query(dev, (uintptr_t)(void *)flow, actions, data,
6478                              error);
6479         if (ret < 0)
6480                 return ret;
6481         return 0;
6482 }
6483
6484 /**
6485  * Get rte_flow callbacks.
6486  *
6487  * @param dev
6488  *   Pointer to Ethernet device structure.
6489  * @param ops
6490  *   Pointer to operation-specific structure.
6491  *
6492  * @return 0
6493  */
6494 int
6495 mlx5_flow_ops_get(struct rte_eth_dev *dev __rte_unused,
6496                   const struct rte_flow_ops **ops)
6497 {
6498         *ops = &mlx5_flow_ops;
6499         return 0;
6500 }
6501
6502 /**
6503  * Create the needed meter and suffix tables.
6504  *
6505  * @param[in] dev
6506  *   Pointer to Ethernet device.
6507  * @param[in] fm
6508  *   Pointer to the flow meter.
6509  *
6510  * @return
6511  *   Pointer to table set on success, NULL otherwise.
6512  */
6513 struct mlx5_meter_domains_infos *
6514 mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev,
6515                           const struct mlx5_flow_meter *fm)
6516 {
6517         const struct mlx5_flow_driver_ops *fops;
6518
6519         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6520         return fops->create_mtr_tbls(dev, fm);
6521 }
6522
6523 /**
6524  * Destroy the meter table set.
6525  *
6526  * @param[in] dev
6527  *   Pointer to Ethernet device.
6528  * @param[in] tbl
6529  *   Pointer to the meter table set.
6530  *
6531  * @return
6532  *   0 on success.
6533  */
6534 int
6535 mlx5_flow_destroy_mtr_tbls(struct rte_eth_dev *dev,
6536                            struct mlx5_meter_domains_infos *tbls)
6537 {
6538         const struct mlx5_flow_driver_ops *fops;
6539
6540         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6541         return fops->destroy_mtr_tbls(dev, tbls);
6542 }
6543
6544 /**
6545  * Create policer rules.
6546  *
6547  * @param[in] dev
6548  *   Pointer to Ethernet device.
6549  * @param[in] fm
6550  *   Pointer to flow meter structure.
6551  * @param[in] attr
6552  *   Pointer to flow attributes.
6553  *
6554  * @return
6555  *   0 on success, -1 otherwise.
6556  */
6557 int
6558 mlx5_flow_create_policer_rules(struct rte_eth_dev *dev,
6559                                struct mlx5_flow_meter *fm,
6560                                const struct rte_flow_attr *attr)
6561 {
6562         const struct mlx5_flow_driver_ops *fops;
6563
6564         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6565         return fops->create_policer_rules(dev, fm, attr);
6566 }
6567
6568 /**
6569  * Destroy policer rules.
6570  *
6571  * @param[in] fm
6572  *   Pointer to flow meter structure.
6573  * @param[in] attr
6574  *   Pointer to flow attributes.
6575  *
6576  * @return
6577  *   0 on success, -1 otherwise.
6578  */
6579 int
6580 mlx5_flow_destroy_policer_rules(struct rte_eth_dev *dev,
6581                                 struct mlx5_flow_meter *fm,
6582                                 const struct rte_flow_attr *attr)
6583 {
6584         const struct mlx5_flow_driver_ops *fops;
6585
6586         fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6587         return fops->destroy_policer_rules(dev, fm, attr);
6588 }
6589
6590 /**
6591  * Allocate a counter.
6592  *
6593  * @param[in] dev
6594  *   Pointer to Ethernet device structure.
6595  *
6596  * @return
6597  *   Index to allocated counter  on success, 0 otherwise.
6598  */
6599 uint32_t
6600 mlx5_counter_alloc(struct rte_eth_dev *dev)
6601 {
6602         const struct mlx5_flow_driver_ops *fops;
6603         struct rte_flow_attr attr = { .transfer = 0 };
6604
6605         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6606                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6607                 return fops->counter_alloc(dev);
6608         }
6609         DRV_LOG(ERR,
6610                 "port %u counter allocate is not supported.",
6611                  dev->data->port_id);
6612         return 0;
6613 }
6614
6615 /**
6616  * Free a counter.
6617  *
6618  * @param[in] dev
6619  *   Pointer to Ethernet device structure.
6620  * @param[in] cnt
6621  *   Index to counter to be free.
6622  */
6623 void
6624 mlx5_counter_free(struct rte_eth_dev *dev, uint32_t cnt)
6625 {
6626         const struct mlx5_flow_driver_ops *fops;
6627         struct rte_flow_attr attr = { .transfer = 0 };
6628
6629         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6630                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6631                 fops->counter_free(dev, cnt);
6632                 return;
6633         }
6634         DRV_LOG(ERR,
6635                 "port %u counter free is not supported.",
6636                  dev->data->port_id);
6637 }
6638
6639 /**
6640  * Query counter statistics.
6641  *
6642  * @param[in] dev
6643  *   Pointer to Ethernet device structure.
6644  * @param[in] cnt
6645  *   Index to counter to query.
6646  * @param[in] clear
6647  *   Set to clear counter statistics.
6648  * @param[out] pkts
6649  *   The counter hits packets number to save.
6650  * @param[out] bytes
6651  *   The counter hits bytes number to save.
6652  *
6653  * @return
6654  *   0 on success, a negative errno value otherwise.
6655  */
6656 int
6657 mlx5_counter_query(struct rte_eth_dev *dev, uint32_t cnt,
6658                    bool clear, uint64_t *pkts, uint64_t *bytes)
6659 {
6660         const struct mlx5_flow_driver_ops *fops;
6661         struct rte_flow_attr attr = { .transfer = 0 };
6662
6663         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
6664                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
6665                 return fops->counter_query(dev, cnt, clear, pkts, bytes);
6666         }
6667         DRV_LOG(ERR,
6668                 "port %u counter query is not supported.",
6669                  dev->data->port_id);
6670         return -ENOTSUP;
6671 }
6672
6673 /**
6674  * Allocate a new memory for the counter values wrapped by all the needed
6675  * management.
6676  *
6677  * @param[in] sh
6678  *   Pointer to mlx5_dev_ctx_shared object.
6679  *
6680  * @return
6681  *   0 on success, a negative errno value otherwise.
6682  */
6683 static int
6684 mlx5_flow_create_counter_stat_mem_mng(struct mlx5_dev_ctx_shared *sh)
6685 {
6686         struct mlx5_devx_mkey_attr mkey_attr;
6687         struct mlx5_counter_stats_mem_mng *mem_mng;
6688         volatile struct flow_counter_stats *raw_data;
6689         int raws_n = MLX5_CNT_CONTAINER_RESIZE + MLX5_MAX_PENDING_QUERIES;
6690         int size = (sizeof(struct flow_counter_stats) *
6691                         MLX5_COUNTERS_PER_POOL +
6692                         sizeof(struct mlx5_counter_stats_raw)) * raws_n +
6693                         sizeof(struct mlx5_counter_stats_mem_mng);
6694         size_t pgsize = rte_mem_page_size();
6695         uint8_t *mem;
6696         int i;
6697
6698         if (pgsize == (size_t)-1) {
6699                 DRV_LOG(ERR, "Failed to get mem page size");
6700                 rte_errno = ENOMEM;
6701                 return -ENOMEM;
6702         }
6703         mem = mlx5_malloc(MLX5_MEM_ZERO, size, pgsize, SOCKET_ID_ANY);
6704         if (!mem) {
6705                 rte_errno = ENOMEM;
6706                 return -ENOMEM;
6707         }
6708         mem_mng = (struct mlx5_counter_stats_mem_mng *)(mem + size) - 1;
6709         size = sizeof(*raw_data) * MLX5_COUNTERS_PER_POOL * raws_n;
6710         mem_mng->umem = mlx5_os_umem_reg(sh->ctx, mem, size,
6711                                                  IBV_ACCESS_LOCAL_WRITE);
6712         if (!mem_mng->umem) {
6713                 rte_errno = errno;
6714                 mlx5_free(mem);
6715                 return -rte_errno;
6716         }
6717         mkey_attr.addr = (uintptr_t)mem;
6718         mkey_attr.size = size;
6719         mkey_attr.umem_id = mlx5_os_get_umem_id(mem_mng->umem);
6720         mkey_attr.pd = sh->pdn;
6721         mkey_attr.log_entity_size = 0;
6722         mkey_attr.pg_access = 0;
6723         mkey_attr.klm_array = NULL;
6724         mkey_attr.klm_num = 0;
6725         mkey_attr.relaxed_ordering_write = sh->cmng.relaxed_ordering_write;
6726         mkey_attr.relaxed_ordering_read = sh->cmng.relaxed_ordering_read;
6727         mem_mng->dm = mlx5_devx_cmd_mkey_create(sh->ctx, &mkey_attr);
6728         if (!mem_mng->dm) {
6729                 mlx5_os_umem_dereg(mem_mng->umem);
6730                 rte_errno = errno;
6731                 mlx5_free(mem);
6732                 return -rte_errno;
6733         }
6734         mem_mng->raws = (struct mlx5_counter_stats_raw *)(mem + size);
6735         raw_data = (volatile struct flow_counter_stats *)mem;
6736         for (i = 0; i < raws_n; ++i) {
6737                 mem_mng->raws[i].mem_mng = mem_mng;
6738                 mem_mng->raws[i].data = raw_data + i * MLX5_COUNTERS_PER_POOL;
6739         }
6740         for (i = 0; i < MLX5_MAX_PENDING_QUERIES; ++i)
6741                 LIST_INSERT_HEAD(&sh->cmng.free_stat_raws,
6742                                  mem_mng->raws + MLX5_CNT_CONTAINER_RESIZE + i,
6743                                  next);
6744         LIST_INSERT_HEAD(&sh->cmng.mem_mngs, mem_mng, next);
6745         sh->cmng.mem_mng = mem_mng;
6746         return 0;
6747 }
6748
6749 /**
6750  * Set the statistic memory to the new counter pool.
6751  *
6752  * @param[in] sh
6753  *   Pointer to mlx5_dev_ctx_shared object.
6754  * @param[in] pool
6755  *   Pointer to the pool to set the statistic memory.
6756  *
6757  * @return
6758  *   0 on success, a negative errno value otherwise.
6759  */
6760 static int
6761 mlx5_flow_set_counter_stat_mem(struct mlx5_dev_ctx_shared *sh,
6762                                struct mlx5_flow_counter_pool *pool)
6763 {
6764         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
6765         /* Resize statistic memory once used out. */
6766         if (!(pool->index % MLX5_CNT_CONTAINER_RESIZE) &&
6767             mlx5_flow_create_counter_stat_mem_mng(sh)) {
6768                 DRV_LOG(ERR, "Cannot resize counter stat mem.");
6769                 return -1;
6770         }
6771         rte_spinlock_lock(&pool->sl);
6772         pool->raw = cmng->mem_mng->raws + pool->index %
6773                     MLX5_CNT_CONTAINER_RESIZE;
6774         rte_spinlock_unlock(&pool->sl);
6775         pool->raw_hw = NULL;
6776         return 0;
6777 }
6778
6779 #define MLX5_POOL_QUERY_FREQ_US 1000000
6780
6781 /**
6782  * Set the periodic procedure for triggering asynchronous batch queries for all
6783  * the counter pools.
6784  *
6785  * @param[in] sh
6786  *   Pointer to mlx5_dev_ctx_shared object.
6787  */
6788 void
6789 mlx5_set_query_alarm(struct mlx5_dev_ctx_shared *sh)
6790 {
6791         uint32_t pools_n, us;
6792
6793         pools_n = __atomic_load_n(&sh->cmng.n_valid, __ATOMIC_RELAXED);
6794         us = MLX5_POOL_QUERY_FREQ_US / pools_n;
6795         DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
6796         if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
6797                 sh->cmng.query_thread_on = 0;
6798                 DRV_LOG(ERR, "Cannot reinitialize query alarm");
6799         } else {
6800                 sh->cmng.query_thread_on = 1;
6801         }
6802 }
6803
6804 /**
6805  * The periodic procedure for triggering asynchronous batch queries for all the
6806  * counter pools. This function is probably called by the host thread.
6807  *
6808  * @param[in] arg
6809  *   The parameter for the alarm process.
6810  */
6811 void
6812 mlx5_flow_query_alarm(void *arg)
6813 {
6814         struct mlx5_dev_ctx_shared *sh = arg;
6815         int ret;
6816         uint16_t pool_index = sh->cmng.pool_index;
6817         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
6818         struct mlx5_flow_counter_pool *pool;
6819         uint16_t n_valid;
6820
6821         if (sh->cmng.pending_queries >= MLX5_MAX_PENDING_QUERIES)
6822                 goto set_alarm;
6823         rte_spinlock_lock(&cmng->pool_update_sl);
6824         pool = cmng->pools[pool_index];
6825         n_valid = cmng->n_valid;
6826         rte_spinlock_unlock(&cmng->pool_update_sl);
6827         /* Set the statistic memory to the new created pool. */
6828         if ((!pool->raw && mlx5_flow_set_counter_stat_mem(sh, pool)))
6829                 goto set_alarm;
6830         if (pool->raw_hw)
6831                 /* There is a pool query in progress. */
6832                 goto set_alarm;
6833         pool->raw_hw =
6834                 LIST_FIRST(&sh->cmng.free_stat_raws);
6835         if (!pool->raw_hw)
6836                 /* No free counter statistics raw memory. */
6837                 goto set_alarm;
6838         /*
6839          * Identify the counters released between query trigger and query
6840          * handle more efficiently. The counter released in this gap period
6841          * should wait for a new round of query as the new arrived packets
6842          * will not be taken into account.
6843          */
6844         pool->query_gen++;
6845         ret = mlx5_devx_cmd_flow_counter_query(pool->min_dcs, 0,
6846                                                MLX5_COUNTERS_PER_POOL,
6847                                                NULL, NULL,
6848                                                pool->raw_hw->mem_mng->dm->id,
6849                                                (void *)(uintptr_t)
6850                                                pool->raw_hw->data,
6851                                                sh->devx_comp,
6852                                                (uint64_t)(uintptr_t)pool);
6853         if (ret) {
6854                 DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs ID"
6855                         " %d", pool->min_dcs->id);
6856                 pool->raw_hw = NULL;
6857                 goto set_alarm;
6858         }
6859         LIST_REMOVE(pool->raw_hw, next);
6860         sh->cmng.pending_queries++;
6861         pool_index++;
6862         if (pool_index >= n_valid)
6863                 pool_index = 0;
6864 set_alarm:
6865         sh->cmng.pool_index = pool_index;
6866         mlx5_set_query_alarm(sh);
6867 }
6868
6869 /**
6870  * Check and callback event for new aged flow in the counter pool
6871  *
6872  * @param[in] sh
6873  *   Pointer to mlx5_dev_ctx_shared object.
6874  * @param[in] pool
6875  *   Pointer to Current counter pool.
6876  */
6877 static void
6878 mlx5_flow_aging_check(struct mlx5_dev_ctx_shared *sh,
6879                    struct mlx5_flow_counter_pool *pool)
6880 {
6881         struct mlx5_priv *priv;
6882         struct mlx5_flow_counter *cnt;
6883         struct mlx5_age_info *age_info;
6884         struct mlx5_age_param *age_param;
6885         struct mlx5_counter_stats_raw *cur = pool->raw_hw;
6886         struct mlx5_counter_stats_raw *prev = pool->raw;
6887         const uint64_t curr_time = MLX5_CURR_TIME_SEC;
6888         const uint32_t time_delta = curr_time - pool->time_of_last_age_check;
6889         uint16_t expected = AGE_CANDIDATE;
6890         uint32_t i;
6891
6892         pool->time_of_last_age_check = curr_time;
6893         for (i = 0; i < MLX5_COUNTERS_PER_POOL; ++i) {
6894                 cnt = MLX5_POOL_GET_CNT(pool, i);
6895                 age_param = MLX5_CNT_TO_AGE(cnt);
6896                 if (__atomic_load_n(&age_param->state,
6897                                     __ATOMIC_RELAXED) != AGE_CANDIDATE)
6898                         continue;
6899                 if (cur->data[i].hits != prev->data[i].hits) {
6900                         __atomic_store_n(&age_param->sec_since_last_hit, 0,
6901                                          __ATOMIC_RELAXED);
6902                         continue;
6903                 }
6904                 if (__atomic_add_fetch(&age_param->sec_since_last_hit,
6905                                        time_delta,
6906                                        __ATOMIC_RELAXED) <= age_param->timeout)
6907                         continue;
6908                 /**
6909                  * Hold the lock first, or if between the
6910                  * state AGE_TMOUT and tailq operation the
6911                  * release happened, the release procedure
6912                  * may delete a non-existent tailq node.
6913                  */
6914                 priv = rte_eth_devices[age_param->port_id].data->dev_private;
6915                 age_info = GET_PORT_AGE_INFO(priv);
6916                 rte_spinlock_lock(&age_info->aged_sl);
6917                 if (__atomic_compare_exchange_n(&age_param->state, &expected,
6918                                                 AGE_TMOUT, false,
6919                                                 __ATOMIC_RELAXED,
6920                                                 __ATOMIC_RELAXED)) {
6921                         TAILQ_INSERT_TAIL(&age_info->aged_counters, cnt, next);
6922                         MLX5_AGE_SET(age_info, MLX5_AGE_EVENT_NEW);
6923                 }
6924                 rte_spinlock_unlock(&age_info->aged_sl);
6925         }
6926         mlx5_age_event_prepare(sh);
6927 }
6928
6929 /**
6930  * Handler for the HW respond about ready values from an asynchronous batch
6931  * query. This function is probably called by the host thread.
6932  *
6933  * @param[in] sh
6934  *   The pointer to the shared device context.
6935  * @param[in] async_id
6936  *   The Devx async ID.
6937  * @param[in] status
6938  *   The status of the completion.
6939  */
6940 void
6941 mlx5_flow_async_pool_query_handle(struct mlx5_dev_ctx_shared *sh,
6942                                   uint64_t async_id, int status)
6943 {
6944         struct mlx5_flow_counter_pool *pool =
6945                 (struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
6946         struct mlx5_counter_stats_raw *raw_to_free;
6947         uint8_t query_gen = pool->query_gen ^ 1;
6948         struct mlx5_flow_counter_mng *cmng = &sh->cmng;
6949         enum mlx5_counter_type cnt_type =
6950                 pool->is_aged ? MLX5_COUNTER_TYPE_AGE :
6951                                 MLX5_COUNTER_TYPE_ORIGIN;
6952
6953         if (unlikely(status)) {
6954                 raw_to_free = pool->raw_hw;
6955         } else {
6956                 raw_to_free = pool->raw;
6957                 if (pool->is_aged)
6958                         mlx5_flow_aging_check(sh, pool);
6959                 rte_spinlock_lock(&pool->sl);
6960                 pool->raw = pool->raw_hw;
6961                 rte_spinlock_unlock(&pool->sl);
6962                 /* Be sure the new raw counters data is updated in memory. */
6963                 rte_io_wmb();
6964                 if (!TAILQ_EMPTY(&pool->counters[query_gen])) {
6965                         rte_spinlock_lock(&cmng->csl[cnt_type]);
6966                         TAILQ_CONCAT(&cmng->counters[cnt_type],
6967                                      &pool->counters[query_gen], next);
6968                         rte_spinlock_unlock(&cmng->csl[cnt_type]);
6969                 }
6970         }
6971         LIST_INSERT_HEAD(&sh->cmng.free_stat_raws, raw_to_free, next);
6972         pool->raw_hw = NULL;
6973         sh->cmng.pending_queries--;
6974 }
6975
6976 static int
6977 flow_group_to_table(uint32_t port_id, uint32_t group, uint32_t *table,
6978                     const struct flow_grp_info *grp_info,
6979                     struct rte_flow_error *error)
6980 {
6981         if (grp_info->transfer && grp_info->external &&
6982             grp_info->fdb_def_rule) {
6983                 if (group == UINT32_MAX)
6984                         return rte_flow_error_set
6985                                                 (error, EINVAL,
6986                                                  RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
6987                                                  NULL,
6988                                                  "group index not supported");
6989                 *table = group + 1;
6990         } else {
6991                 *table = group;
6992         }
6993         DRV_LOG(DEBUG, "port %u group=%#x table=%#x", port_id, group, *table);
6994         return 0;
6995 }
6996
6997 /**
6998  * Translate the rte_flow group index to HW table value.
6999  *
7000  * If tunnel offload is disabled, all group ids converted to flow table
7001  * id using the standard method.
7002  * If tunnel offload is enabled, group id can be converted using the
7003  * standard or tunnel conversion method. Group conversion method
7004  * selection depends on flags in `grp_info` parameter:
7005  * - Internal (grp_info.external == 0) groups conversion uses the
7006  *   standard method.
7007  * - Group ids in JUMP action converted with the tunnel conversion.
7008  * - Group id in rule attribute conversion depends on a rule type and
7009  *   group id value:
7010  *   ** non zero group attributes converted with the tunnel method
7011  *   ** zero group attribute in non-tunnel rule is converted using the
7012  *      standard method - there's only one root table
7013  *   ** zero group attribute in steer tunnel rule is converted with the
7014  *      standard method - single root table
7015  *   ** zero group attribute in match tunnel rule is a special OvS
7016  *      case: that value is used for portability reasons. That group
7017  *      id is converted with the tunnel conversion method.
7018  *
7019  * @param[in] dev
7020  *   Port device
7021  * @param[in] tunnel
7022  *   PMD tunnel offload object
7023  * @param[in] group
7024  *   rte_flow group index value.
7025  * @param[out] table
7026  *   HW table value.
7027  * @param[in] grp_info
7028  *   flags used for conversion
7029  * @param[out] error
7030  *   Pointer to error structure.
7031  *
7032  * @return
7033  *   0 on success, a negative errno value otherwise and rte_errno is set.
7034  */
7035 int
7036 mlx5_flow_group_to_table(struct rte_eth_dev *dev,
7037                          const struct mlx5_flow_tunnel *tunnel,
7038                          uint32_t group, uint32_t *table,
7039                          const struct flow_grp_info *grp_info,
7040                          struct rte_flow_error *error)
7041 {
7042         int ret;
7043         bool standard_translation;
7044
7045         if (!grp_info->skip_scale && grp_info->external &&
7046             group < MLX5_MAX_TABLES_EXTERNAL)
7047                 group *= MLX5_FLOW_TABLE_FACTOR;
7048         if (is_tunnel_offload_active(dev)) {
7049                 standard_translation = !grp_info->external ||
7050                                         grp_info->std_tbl_fix;
7051         } else {
7052                 standard_translation = true;
7053         }
7054         DRV_LOG(DEBUG,
7055                 "port %u group=%u transfer=%d external=%d fdb_def_rule=%d translate=%s",
7056                 dev->data->port_id, group, grp_info->transfer,
7057                 grp_info->external, grp_info->fdb_def_rule,
7058                 standard_translation ? "STANDARD" : "TUNNEL");
7059         if (standard_translation)
7060                 ret = flow_group_to_table(dev->data->port_id, group, table,
7061                                           grp_info, error);
7062         else
7063                 ret = tunnel_flow_group_to_flow_table(dev, tunnel, group,
7064                                                       table, error);
7065
7066         return ret;
7067 }
7068
7069 /**
7070  * Discover availability of metadata reg_c's.
7071  *
7072  * Iteratively use test flows to check availability.
7073  *
7074  * @param[in] dev
7075  *   Pointer to the Ethernet device structure.
7076  *
7077  * @return
7078  *   0 on success, a negative errno value otherwise and rte_errno is set.
7079  */
7080 int
7081 mlx5_flow_discover_mreg_c(struct rte_eth_dev *dev)
7082 {
7083         struct mlx5_priv *priv = dev->data->dev_private;
7084         struct mlx5_dev_config *config = &priv->config;
7085         enum modify_reg idx;
7086         int n = 0;
7087
7088         /* reg_c[0] and reg_c[1] are reserved. */
7089         config->flow_mreg_c[n++] = REG_C_0;
7090         config->flow_mreg_c[n++] = REG_C_1;
7091         /* Discover availability of other reg_c's. */
7092         for (idx = REG_C_2; idx <= REG_C_7; ++idx) {
7093                 struct rte_flow_attr attr = {
7094                         .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
7095                         .priority = MLX5_FLOW_LOWEST_PRIO_INDICATOR,
7096                         .ingress = 1,
7097                 };
7098                 struct rte_flow_item items[] = {
7099                         [0] = {
7100                                 .type = RTE_FLOW_ITEM_TYPE_END,
7101                         },
7102                 };
7103                 struct rte_flow_action actions[] = {
7104                         [0] = {
7105                                 .type = (enum rte_flow_action_type)
7106                                         MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
7107                                 .conf = &(struct mlx5_flow_action_copy_mreg){
7108                                         .src = REG_C_1,
7109                                         .dst = idx,
7110                                 },
7111                         },
7112                         [1] = {
7113                                 .type = RTE_FLOW_ACTION_TYPE_JUMP,
7114                                 .conf = &(struct rte_flow_action_jump){
7115                                         .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
7116                                 },
7117                         },
7118                         [2] = {
7119                                 .type = RTE_FLOW_ACTION_TYPE_END,
7120                         },
7121                 };
7122                 uint32_t flow_idx;
7123                 struct rte_flow *flow;
7124                 struct rte_flow_error error;
7125
7126                 if (!config->dv_flow_en)
7127                         break;
7128                 /* Create internal flow, validation skips copy action. */
7129                 flow_idx = flow_list_create(dev, NULL, &attr, items,
7130                                             actions, false, &error);
7131                 flow = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW],
7132                                       flow_idx);
7133                 if (!flow)
7134                         continue;
7135                 config->flow_mreg_c[n++] = idx;
7136                 flow_list_destroy(dev, NULL, flow_idx);
7137         }
7138         for (; n < MLX5_MREG_C_NUM; ++n)
7139                 config->flow_mreg_c[n] = REG_NON;
7140         return 0;
7141 }
7142
7143 /**
7144  * Dump flow raw hw data to file
7145  *
7146  * @param[in] dev
7147  *    The pointer to Ethernet device.
7148  * @param[in] file
7149  *   A pointer to a file for output.
7150  * @param[out] error
7151  *   Perform verbose error reporting if not NULL. PMDs initialize this
7152  *   structure in case of error only.
7153  * @return
7154  *   0 on success, a nagative value otherwise.
7155  */
7156 int
7157 mlx5_flow_dev_dump(struct rte_eth_dev *dev, struct rte_flow *flow_idx,
7158                    FILE *file,
7159                    struct rte_flow_error *error __rte_unused)
7160 {
7161         struct mlx5_priv *priv = dev->data->dev_private;
7162         struct mlx5_dev_ctx_shared *sh = priv->sh;
7163
7164         if (!priv->config.dv_flow_en) {
7165                 if (fputs("device dv flow disabled\n", file) <= 0)
7166                         return -errno;
7167                 return -ENOTSUP;
7168         }
7169
7170         if (!flow_idx)
7171                 return mlx5_devx_cmd_flow_dump(sh->fdb_domain,
7172                                 sh->rx_domain, sh->tx_domain, file);
7173         return -ENOTSUP;
7174 }
7175
7176 /**
7177  * Get aged-out flows.
7178  *
7179  * @param[in] dev
7180  *   Pointer to the Ethernet device structure.
7181  * @param[in] context
7182  *   The address of an array of pointers to the aged-out flows contexts.
7183  * @param[in] nb_countexts
7184  *   The length of context array pointers.
7185  * @param[out] error
7186  *   Perform verbose error reporting if not NULL. Initialized in case of
7187  *   error only.
7188  *
7189  * @return
7190  *   how many contexts get in success, otherwise negative errno value.
7191  *   if nb_contexts is 0, return the amount of all aged contexts.
7192  *   if nb_contexts is not 0 , return the amount of aged flows reported
7193  *   in the context array.
7194  */
7195 int
7196 mlx5_flow_get_aged_flows(struct rte_eth_dev *dev, void **contexts,
7197                         uint32_t nb_contexts, struct rte_flow_error *error)
7198 {
7199         const struct mlx5_flow_driver_ops *fops;
7200         struct rte_flow_attr attr = { .transfer = 0 };
7201
7202         if (flow_get_drv_type(dev, &attr) == MLX5_FLOW_TYPE_DV) {
7203                 fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
7204                 return fops->get_aged_flows(dev, contexts, nb_contexts,
7205                                                     error);
7206         }
7207         DRV_LOG(ERR,
7208                 "port %u get aged flows is not supported.",
7209                  dev->data->port_id);
7210         return -ENOTSUP;
7211 }
7212
7213 /* Wrapper for driver action_validate op callback */
7214 static int
7215 flow_drv_action_validate(struct rte_eth_dev *dev,
7216                          const struct rte_flow_indir_action_conf *conf,
7217                          const struct rte_flow_action *action,
7218                          const struct mlx5_flow_driver_ops *fops,
7219                          struct rte_flow_error *error)
7220 {
7221         static const char err_msg[] = "indirect action validation unsupported";
7222
7223         if (!fops->action_validate) {
7224                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7225                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7226                                    NULL, err_msg);
7227                 return -rte_errno;
7228         }
7229         return fops->action_validate(dev, conf, action, error);
7230 }
7231
7232 /**
7233  * Destroys the shared action by handle.
7234  *
7235  * @param dev
7236  *   Pointer to Ethernet device structure.
7237  * @param[in] handle
7238  *   Handle for the indirect action object to be destroyed.
7239  * @param[out] error
7240  *   Perform verbose error reporting if not NULL. PMDs initialize this
7241  *   structure in case of error only.
7242  *
7243  * @return
7244  *   0 on success, a negative errno value otherwise and rte_errno is set.
7245  *
7246  * @note: wrapper for driver action_create op callback.
7247  */
7248 static int
7249 mlx5_action_handle_destroy(struct rte_eth_dev *dev,
7250                            struct rte_flow_action_handle *handle,
7251                            struct rte_flow_error *error)
7252 {
7253         static const char err_msg[] = "indirect action destruction unsupported";
7254         struct rte_flow_attr attr = { .transfer = 0 };
7255         const struct mlx5_flow_driver_ops *fops =
7256                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7257
7258         if (!fops->action_destroy) {
7259                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7260                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7261                                    NULL, err_msg);
7262                 return -rte_errno;
7263         }
7264         return fops->action_destroy(dev, handle, error);
7265 }
7266
7267 /* Wrapper for driver action_destroy op callback */
7268 static int
7269 flow_drv_action_update(struct rte_eth_dev *dev,
7270                        struct rte_flow_action_handle *handle,
7271                        const void *update,
7272                        const struct mlx5_flow_driver_ops *fops,
7273                        struct rte_flow_error *error)
7274 {
7275         static const char err_msg[] = "indirect action update unsupported";
7276
7277         if (!fops->action_update) {
7278                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7279                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7280                                    NULL, err_msg);
7281                 return -rte_errno;
7282         }
7283         return fops->action_update(dev, handle, update, error);
7284 }
7285
7286 /* Wrapper for driver action_destroy op callback */
7287 static int
7288 flow_drv_action_query(struct rte_eth_dev *dev,
7289                       const struct rte_flow_action_handle *handle,
7290                       void *data,
7291                       const struct mlx5_flow_driver_ops *fops,
7292                       struct rte_flow_error *error)
7293 {
7294         static const char err_msg[] = "indirect action query unsupported";
7295
7296         if (!fops->action_query) {
7297                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7298                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7299                                    NULL, err_msg);
7300                 return -rte_errno;
7301         }
7302         return fops->action_query(dev, handle, data, error);
7303 }
7304
7305 /**
7306  * Create indirect action for reuse in multiple flow rules.
7307  *
7308  * @param dev
7309  *   Pointer to Ethernet device structure.
7310  * @param conf
7311  *   Pointer to indirect action object configuration.
7312  * @param[in] action
7313  *   Action configuration for indirect action object creation.
7314  * @param[out] error
7315  *   Perform verbose error reporting if not NULL. PMDs initialize this
7316  *   structure in case of error only.
7317  * @return
7318  *   A valid handle in case of success, NULL otherwise and rte_errno is set.
7319  */
7320 static struct rte_flow_action_handle *
7321 mlx5_action_handle_create(struct rte_eth_dev *dev,
7322                           const struct rte_flow_indir_action_conf *conf,
7323                           const struct rte_flow_action *action,
7324                           struct rte_flow_error *error)
7325 {
7326         static const char err_msg[] = "indirect action creation unsupported";
7327         struct rte_flow_attr attr = { .transfer = 0 };
7328         const struct mlx5_flow_driver_ops *fops =
7329                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7330
7331         if (flow_drv_action_validate(dev, conf, action, fops, error))
7332                 return NULL;
7333         if (!fops->action_create) {
7334                 DRV_LOG(ERR, "port %u %s.", dev->data->port_id, err_msg);
7335                 rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
7336                                    NULL, err_msg);
7337                 return NULL;
7338         }
7339         return fops->action_create(dev, conf, action, error);
7340 }
7341
7342 /**
7343  * Updates inplace the indirect action configuration pointed by *handle*
7344  * with the configuration provided as *update* argument.
7345  * The update of the indirect action configuration effects all flow rules
7346  * reusing the action via handle.
7347  *
7348  * @param dev
7349  *   Pointer to Ethernet device structure.
7350  * @param[in] handle
7351  *   Handle for the indirect action to be updated.
7352  * @param[in] update
7353  *   Action specification used to modify the action pointed by handle.
7354  *   *update* could be of same type with the action pointed by the *handle*
7355  *   handle argument, or some other structures like a wrapper, depending on
7356  *   the indirect action type.
7357  * @param[out] error
7358  *   Perform verbose error reporting if not NULL. PMDs initialize this
7359  *   structure in case of error only.
7360  *
7361  * @return
7362  *   0 on success, a negative errno value otherwise and rte_errno is set.
7363  */
7364 static int
7365 mlx5_action_handle_update(struct rte_eth_dev *dev,
7366                 struct rte_flow_action_handle *handle,
7367                 const void *update,
7368                 struct rte_flow_error *error)
7369 {
7370         struct rte_flow_attr attr = { .transfer = 0 };
7371         const struct mlx5_flow_driver_ops *fops =
7372                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7373         int ret;
7374
7375         ret = flow_drv_action_validate(dev, NULL,
7376                         (const struct rte_flow_action *)update, fops, error);
7377         if (ret)
7378                 return ret;
7379         return flow_drv_action_update(dev, handle, update, fops,
7380                                       error);
7381 }
7382
7383 /**
7384  * Query the indirect action by handle.
7385  *
7386  * This function allows retrieving action-specific data such as counters.
7387  * Data is gathered by special action which may be present/referenced in
7388  * more than one flow rule definition.
7389  *
7390  * see @RTE_FLOW_ACTION_TYPE_COUNT
7391  *
7392  * @param dev
7393  *   Pointer to Ethernet device structure.
7394  * @param[in] handle
7395  *   Handle for the indirect action to query.
7396  * @param[in, out] data
7397  *   Pointer to storage for the associated query data type.
7398  * @param[out] error
7399  *   Perform verbose error reporting if not NULL. PMDs initialize this
7400  *   structure in case of error only.
7401  *
7402  * @return
7403  *   0 on success, a negative errno value otherwise and rte_errno is set.
7404  */
7405 static int
7406 mlx5_action_handle_query(struct rte_eth_dev *dev,
7407                          const struct rte_flow_action_handle *handle,
7408                          void *data,
7409                          struct rte_flow_error *error)
7410 {
7411         struct rte_flow_attr attr = { .transfer = 0 };
7412         const struct mlx5_flow_driver_ops *fops =
7413                         flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7414
7415         return flow_drv_action_query(dev, handle, data, fops, error);
7416 }
7417
7418 /**
7419  * Destroy all indirect actions (shared RSS).
7420  *
7421  * @param dev
7422  *   Pointer to Ethernet device.
7423  *
7424  * @return
7425  *   0 on success, a negative errno value otherwise and rte_errno is set.
7426  */
7427 int
7428 mlx5_action_handle_flush(struct rte_eth_dev *dev)
7429 {
7430         struct rte_flow_error error;
7431         struct mlx5_priv *priv = dev->data->dev_private;
7432         struct mlx5_shared_action_rss *shared_rss;
7433         int ret = 0;
7434         uint32_t idx;
7435
7436         ILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
7437                       priv->rss_shared_actions, idx, shared_rss, next) {
7438                 ret |= mlx5_action_handle_destroy(dev,
7439                        (struct rte_flow_action_handle *)(uintptr_t)idx, &error);
7440         }
7441         return ret;
7442 }
7443
7444 #ifndef HAVE_MLX5DV_DR
7445 #define MLX5_DOMAIN_SYNC_FLOW ((1 << 0) | (1 << 1))
7446 #else
7447 #define MLX5_DOMAIN_SYNC_FLOW \
7448         (MLX5DV_DR_DOMAIN_SYNC_FLAGS_SW | MLX5DV_DR_DOMAIN_SYNC_FLAGS_HW)
7449 #endif
7450
7451 int rte_pmd_mlx5_sync_flow(uint16_t port_id, uint32_t domains)
7452 {
7453         struct rte_eth_dev *dev = &rte_eth_devices[port_id];
7454         const struct mlx5_flow_driver_ops *fops;
7455         int ret;
7456         struct rte_flow_attr attr = { .transfer = 0 };
7457
7458         fops = flow_get_drv_ops(flow_get_drv_type(dev, &attr));
7459         ret = fops->sync_domain(dev, domains, MLX5_DOMAIN_SYNC_FLOW);
7460         if (ret > 0)
7461                 ret = -ret;
7462         return ret;
7463 }
7464
7465 /**
7466  * tunnel offload functionalilty is defined for DV environment only
7467  */
7468 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
7469 __extension__
7470 union tunnel_offload_mark {
7471         uint32_t val;
7472         struct {
7473                 uint32_t app_reserve:8;
7474                 uint32_t table_id:15;
7475                 uint32_t transfer:1;
7476                 uint32_t _unused_:8;
7477         };
7478 };
7479
7480 static bool
7481 mlx5_access_tunnel_offload_db
7482         (struct rte_eth_dev *dev,
7483          bool (*match)(struct rte_eth_dev *,
7484                        struct mlx5_flow_tunnel *, const void *),
7485          void (*hit)(struct rte_eth_dev *, struct mlx5_flow_tunnel *, void *),
7486          void (*miss)(struct rte_eth_dev *, void *),
7487          void *ctx, bool lock_op);
7488
7489 static int
7490 flow_tunnel_add_default_miss(struct rte_eth_dev *dev,
7491                              struct rte_flow *flow,
7492                              const struct rte_flow_attr *attr,
7493                              const struct rte_flow_action *app_actions,
7494                              uint32_t flow_idx,
7495                              struct tunnel_default_miss_ctx *ctx,
7496                              struct rte_flow_error *error)
7497 {
7498         struct mlx5_priv *priv = dev->data->dev_private;
7499         struct mlx5_flow *dev_flow;
7500         struct rte_flow_attr miss_attr = *attr;
7501         const struct mlx5_flow_tunnel *tunnel = app_actions[0].conf;
7502         const struct rte_flow_item miss_items[2] = {
7503                 {
7504                         .type = RTE_FLOW_ITEM_TYPE_ETH,
7505                         .spec = NULL,
7506                         .last = NULL,
7507                         .mask = NULL
7508                 },
7509                 {
7510                         .type = RTE_FLOW_ITEM_TYPE_END,
7511                         .spec = NULL,
7512                         .last = NULL,
7513                         .mask = NULL
7514                 }
7515         };
7516         union tunnel_offload_mark mark_id;
7517         struct rte_flow_action_mark miss_mark;
7518         struct rte_flow_action miss_actions[3] = {
7519                 [0] = { .type = RTE_FLOW_ACTION_TYPE_MARK, .conf = &miss_mark },
7520                 [2] = { .type = RTE_FLOW_ACTION_TYPE_END,  .conf = NULL }
7521         };
7522         const struct rte_flow_action_jump *jump_data;
7523         uint32_t i, flow_table = 0; /* prevent compilation warning */
7524         struct flow_grp_info grp_info = {
7525                 .external = 1,
7526                 .transfer = attr->transfer,
7527                 .fdb_def_rule = !!priv->fdb_def_rule,
7528                 .std_tbl_fix = 0,
7529         };
7530         int ret;
7531
7532         if (!attr->transfer) {
7533                 uint32_t q_size;
7534
7535                 miss_actions[1].type = RTE_FLOW_ACTION_TYPE_RSS;
7536                 q_size = priv->reta_idx_n * sizeof(ctx->queue[0]);
7537                 ctx->queue = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO, q_size,
7538                                          0, SOCKET_ID_ANY);
7539                 if (!ctx->queue)
7540                         return rte_flow_error_set
7541                                 (error, ENOMEM,
7542                                 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7543                                 NULL, "invalid default miss RSS");
7544                 ctx->action_rss.func = RTE_ETH_HASH_FUNCTION_DEFAULT,
7545                 ctx->action_rss.level = 0,
7546                 ctx->action_rss.types = priv->rss_conf.rss_hf,
7547                 ctx->action_rss.key_len = priv->rss_conf.rss_key_len,
7548                 ctx->action_rss.queue_num = priv->reta_idx_n,
7549                 ctx->action_rss.key = priv->rss_conf.rss_key,
7550                 ctx->action_rss.queue = ctx->queue;
7551                 if (!priv->reta_idx_n || !priv->rxqs_n)
7552                         return rte_flow_error_set
7553                                 (error, EINVAL,
7554                                 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7555                                 NULL, "invalid port configuration");
7556                 if (!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG))
7557                         ctx->action_rss.types = 0;
7558                 for (i = 0; i != priv->reta_idx_n; ++i)
7559                         ctx->queue[i] = (*priv->reta_idx)[i];
7560         } else {
7561                 miss_actions[1].type = RTE_FLOW_ACTION_TYPE_JUMP;
7562                 ctx->miss_jump.group = MLX5_TNL_MISS_FDB_JUMP_GRP;
7563         }
7564         miss_actions[1].conf = (typeof(miss_actions[1].conf))ctx->raw;
7565         for (; app_actions->type != RTE_FLOW_ACTION_TYPE_JUMP; app_actions++);
7566         jump_data = app_actions->conf;
7567         miss_attr.priority = MLX5_TNL_MISS_RULE_PRIORITY;
7568         miss_attr.group = jump_data->group;
7569         ret = mlx5_flow_group_to_table(dev, tunnel, jump_data->group,
7570                                        &flow_table, &grp_info, error);
7571         if (ret)
7572                 return rte_flow_error_set(error, EINVAL,
7573                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF,
7574                                           NULL, "invalid tunnel id");
7575         mark_id.app_reserve = 0;
7576         mark_id.table_id = tunnel_flow_tbl_to_id(flow_table);
7577         mark_id.transfer = !!attr->transfer;
7578         mark_id._unused_ = 0;
7579         miss_mark.id = mark_id.val;
7580         dev_flow = flow_drv_prepare(dev, flow, &miss_attr,
7581                                     miss_items, miss_actions, flow_idx, error);
7582         if (!dev_flow)
7583                 return -rte_errno;
7584         dev_flow->flow = flow;
7585         dev_flow->external = true;
7586         dev_flow->tunnel = tunnel;
7587         /* Subflow object was created, we must include one in the list. */
7588         SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
7589                       dev_flow->handle, next);
7590         DRV_LOG(DEBUG,
7591                 "port %u tunnel type=%d id=%u miss rule priority=%u group=%u",
7592                 dev->data->port_id, tunnel->app_tunnel.type,
7593                 tunnel->tunnel_id, miss_attr.priority, miss_attr.group);
7594         ret = flow_drv_translate(dev, dev_flow, &miss_attr, miss_items,
7595                                   miss_actions, error);
7596         if (!ret)
7597                 ret = flow_mreg_update_copy_table(dev, flow, miss_actions,
7598                                                   error);
7599
7600         return ret;
7601 }
7602
7603 static const struct mlx5_flow_tbl_data_entry  *
7604 tunnel_mark_decode(struct rte_eth_dev *dev, uint32_t mark)
7605 {
7606         struct mlx5_priv *priv = dev->data->dev_private;
7607         struct mlx5_dev_ctx_shared *sh = priv->sh;
7608         struct mlx5_hlist_entry *he;
7609         union tunnel_offload_mark mbits = { .val = mark };
7610         union mlx5_flow_tbl_key table_key = {
7611                 {
7612                         .table_id = tunnel_id_to_flow_tbl(mbits.table_id),
7613                         .dummy = 0,
7614                         .domain = !!mbits.transfer,
7615                         .direction = 0,
7616                 }
7617         };
7618         he = mlx5_hlist_lookup(sh->flow_tbls, table_key.v64, NULL);
7619         return he ?
7620                container_of(he, struct mlx5_flow_tbl_data_entry, entry) : NULL;
7621 }
7622
7623 static void
7624 mlx5_flow_tunnel_grp2tbl_remove_cb(struct mlx5_hlist *list,
7625                                    struct mlx5_hlist_entry *entry)
7626 {
7627         struct mlx5_dev_ctx_shared *sh = list->ctx;
7628         struct tunnel_tbl_entry *tte = container_of(entry, typeof(*tte), hash);
7629
7630         mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7631                         tunnel_flow_tbl_to_id(tte->flow_table));
7632         mlx5_free(tte);
7633 }
7634
7635 static int
7636 mlx5_flow_tunnel_grp2tbl_match_cb(struct mlx5_hlist *list __rte_unused,
7637                                   struct mlx5_hlist_entry *entry,
7638                                   uint64_t key, void *cb_ctx __rte_unused)
7639 {
7640         union tunnel_tbl_key tbl = {
7641                 .val = key,
7642         };
7643         struct tunnel_tbl_entry *tte = container_of(entry, typeof(*tte), hash);
7644
7645         return tbl.tunnel_id != tte->tunnel_id || tbl.group != tte->group;
7646 }
7647
7648 static struct mlx5_hlist_entry *
7649 mlx5_flow_tunnel_grp2tbl_create_cb(struct mlx5_hlist *list, uint64_t key,
7650                                    void *ctx __rte_unused)
7651 {
7652         struct mlx5_dev_ctx_shared *sh = list->ctx;
7653         struct tunnel_tbl_entry *tte;
7654         union tunnel_tbl_key tbl = {
7655                 .val = key,
7656         };
7657
7658         tte = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO,
7659                           sizeof(*tte), 0,
7660                           SOCKET_ID_ANY);
7661         if (!tte)
7662                 goto err;
7663         mlx5_ipool_malloc(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7664                           &tte->flow_table);
7665         if (tte->flow_table >= MLX5_MAX_TABLES) {
7666                 DRV_LOG(ERR, "Tunnel TBL ID %d exceed max limit.",
7667                         tte->flow_table);
7668                 mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TNL_TBL_ID],
7669                                 tte->flow_table);
7670                 goto err;
7671         } else if (!tte->flow_table) {
7672                 goto err;
7673         }
7674         tte->flow_table = tunnel_id_to_flow_tbl(tte->flow_table);
7675         tte->tunnel_id = tbl.tunnel_id;
7676         tte->group = tbl.group;
7677         return &tte->hash;
7678 err:
7679         if (tte)
7680                 mlx5_free(tte);
7681         return NULL;
7682 }
7683
7684 static uint32_t
7685 tunnel_flow_group_to_flow_table(struct rte_eth_dev *dev,
7686                                 const struct mlx5_flow_tunnel *tunnel,
7687                                 uint32_t group, uint32_t *table,
7688                                 struct rte_flow_error *error)
7689 {
7690         struct mlx5_hlist_entry *he;
7691         struct tunnel_tbl_entry *tte;
7692         union tunnel_tbl_key key = {
7693                 .tunnel_id = tunnel ? tunnel->tunnel_id : 0,
7694                 .group = group
7695         };
7696         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
7697         struct mlx5_hlist *group_hash;
7698
7699         group_hash = tunnel ? tunnel->groups : thub->groups;
7700         he = mlx5_hlist_register(group_hash, key.val, NULL);
7701         if (!he)
7702                 return rte_flow_error_set(error, EINVAL,
7703                                           RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
7704                                           NULL,
7705                                           "tunnel group index not supported");
7706         tte = container_of(he, typeof(*tte), hash);
7707         *table = tte->flow_table;
7708         DRV_LOG(DEBUG, "port %u tunnel %u group=%#x table=%#x",
7709                 dev->data->port_id, key.tunnel_id, group, *table);
7710         return 0;
7711 }
7712
7713 static void
7714 mlx5_flow_tunnel_free(struct rte_eth_dev *dev,
7715                       struct mlx5_flow_tunnel *tunnel)
7716 {
7717         struct mlx5_priv *priv = dev->data->dev_private;
7718         struct mlx5_indexed_pool *ipool;
7719
7720         DRV_LOG(DEBUG, "port %u release pmd tunnel id=0x%x",
7721                 dev->data->port_id, tunnel->tunnel_id);
7722         LIST_REMOVE(tunnel, chain);
7723         mlx5_hlist_destroy(tunnel->groups);
7724         ipool = priv->sh->ipool[MLX5_IPOOL_TUNNEL_ID];
7725         mlx5_ipool_free(ipool, tunnel->tunnel_id);
7726 }
7727
7728 static bool
7729 mlx5_access_tunnel_offload_db
7730         (struct rte_eth_dev *dev,
7731          bool (*match)(struct rte_eth_dev *,
7732                        struct mlx5_flow_tunnel *, const void *),
7733          void (*hit)(struct rte_eth_dev *, struct mlx5_flow_tunnel *, void *),
7734          void (*miss)(struct rte_eth_dev *, void *),
7735          void *ctx, bool lock_op)
7736 {
7737         bool verdict = false;
7738         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
7739         struct mlx5_flow_tunnel *tunnel;
7740
7741         rte_spinlock_lock(&thub->sl);
7742         LIST_FOREACH(tunnel, &thub->tunnels, chain) {
7743                 verdict = match(dev, tunnel, (const void *)ctx);
7744                 if (verdict)
7745                         break;
7746         }
7747         if (!lock_op)
7748                 rte_spinlock_unlock(&thub->sl);
7749         if (verdict && hit)
7750                 hit(dev, tunnel, ctx);
7751         if (!verdict && miss)
7752                 miss(dev, ctx);
7753         if (lock_op)
7754                 rte_spinlock_unlock(&thub->sl);
7755
7756         return verdict;
7757 }
7758
7759 struct tunnel_db_find_tunnel_id_ctx {
7760         uint32_t tunnel_id;
7761         struct mlx5_flow_tunnel *tunnel;
7762 };
7763
7764 static bool
7765 find_tunnel_id_match(struct rte_eth_dev *dev,
7766                      struct mlx5_flow_tunnel *tunnel, const void *x)
7767 {
7768         const struct tunnel_db_find_tunnel_id_ctx *ctx = x;
7769
7770         RTE_SET_USED(dev);
7771         return tunnel->tunnel_id == ctx->tunnel_id;
7772 }
7773
7774 static void
7775 find_tunnel_id_hit(struct rte_eth_dev *dev,
7776                    struct mlx5_flow_tunnel *tunnel, void *x)
7777 {
7778         struct tunnel_db_find_tunnel_id_ctx *ctx = x;
7779         RTE_SET_USED(dev);
7780         ctx->tunnel = tunnel;
7781 }
7782
7783 static struct mlx5_flow_tunnel *
7784 mlx5_find_tunnel_id(struct rte_eth_dev *dev, uint32_t id)
7785 {
7786         struct tunnel_db_find_tunnel_id_ctx ctx = {
7787                 .tunnel_id = id,
7788         };
7789
7790         mlx5_access_tunnel_offload_db(dev, find_tunnel_id_match,
7791                                       find_tunnel_id_hit, NULL, &ctx, true);
7792
7793         return ctx.tunnel;
7794 }
7795
7796 static struct mlx5_flow_tunnel *
7797 mlx5_flow_tunnel_allocate(struct rte_eth_dev *dev,
7798                           const struct rte_flow_tunnel *app_tunnel)
7799 {
7800         struct mlx5_priv *priv = dev->data->dev_private;
7801         struct mlx5_indexed_pool *ipool;
7802         struct mlx5_flow_tunnel *tunnel;
7803         uint32_t id;
7804
7805         ipool = priv->sh->ipool[MLX5_IPOOL_TUNNEL_ID];
7806         tunnel = mlx5_ipool_zmalloc(ipool, &id);
7807         if (!tunnel)
7808                 return NULL;
7809         if (id >= MLX5_MAX_TUNNELS) {
7810                 mlx5_ipool_free(ipool, id);
7811                 DRV_LOG(ERR, "Tunnel ID %d exceed max limit.", id);
7812                 return NULL;
7813         }
7814         tunnel->groups = mlx5_hlist_create("tunnel groups", 1024, 0, 0,
7815                                            mlx5_flow_tunnel_grp2tbl_create_cb,
7816                                            mlx5_flow_tunnel_grp2tbl_match_cb,
7817                                            mlx5_flow_tunnel_grp2tbl_remove_cb);
7818         if (!tunnel->groups) {
7819                 mlx5_ipool_free(ipool, id);
7820                 return NULL;
7821         }
7822         tunnel->groups->ctx = priv->sh;
7823         /* initiate new PMD tunnel */
7824         memcpy(&tunnel->app_tunnel, app_tunnel, sizeof(*app_tunnel));
7825         tunnel->tunnel_id = id;
7826         tunnel->action.type = (typeof(tunnel->action.type))
7827                               MLX5_RTE_FLOW_ACTION_TYPE_TUNNEL_SET;
7828         tunnel->action.conf = tunnel;
7829         tunnel->item.type = (typeof(tunnel->item.type))
7830                             MLX5_RTE_FLOW_ITEM_TYPE_TUNNEL;
7831         tunnel->item.spec = tunnel;
7832         tunnel->item.last = NULL;
7833         tunnel->item.mask = NULL;
7834
7835         DRV_LOG(DEBUG, "port %u new pmd tunnel id=0x%x",
7836                 dev->data->port_id, tunnel->tunnel_id);
7837
7838         return tunnel;
7839 }
7840
7841 struct tunnel_db_get_tunnel_ctx {
7842         const struct rte_flow_tunnel *app_tunnel;
7843         struct mlx5_flow_tunnel *tunnel;
7844 };
7845
7846 static bool get_tunnel_match(struct rte_eth_dev *dev,
7847                              struct mlx5_flow_tunnel *tunnel, const void *x)
7848 {
7849         const struct tunnel_db_get_tunnel_ctx *ctx = x;
7850
7851         RTE_SET_USED(dev);
7852         return !memcmp(ctx->app_tunnel, &tunnel->app_tunnel,
7853                        sizeof(*ctx->app_tunnel));
7854 }
7855
7856 static void get_tunnel_hit(struct rte_eth_dev *dev,
7857                            struct mlx5_flow_tunnel *tunnel, void *x)
7858 {
7859         /* called under tunnel spinlock protection */
7860         struct tunnel_db_get_tunnel_ctx *ctx = x;
7861
7862         RTE_SET_USED(dev);
7863         tunnel->refctn++;
7864         ctx->tunnel = tunnel;
7865 }
7866
7867 static void get_tunnel_miss(struct rte_eth_dev *dev, void *x)
7868 {
7869         /* called under tunnel spinlock protection */
7870         struct mlx5_flow_tunnel_hub *thub = mlx5_tunnel_hub(dev);
7871         struct tunnel_db_get_tunnel_ctx *ctx = x;
7872
7873         rte_spinlock_unlock(&thub->sl);
7874         ctx->tunnel = mlx5_flow_tunnel_allocate(dev, ctx->app_tunnel);
7875         rte_spinlock_lock(&thub->sl);
7876         if (ctx->tunnel) {
7877                 ctx->tunnel->refctn = 1;
7878                 LIST_INSERT_HEAD(&thub->tunnels, ctx->tunnel, chain);
7879         }
7880 }
7881
7882
7883 static int
7884 mlx5_get_flow_tunnel(struct rte_eth_dev *dev,
7885                      const struct rte_flow_tunnel *app_tunnel,
7886                      struct mlx5_flow_tunnel **tunnel)
7887 {
7888         struct tunnel_db_get_tunnel_ctx ctx = {
7889                 .app_tunnel = app_tunnel,
7890         };
7891
7892         mlx5_access_tunnel_offload_db(dev, get_tunnel_match, get_tunnel_hit,
7893                                       get_tunnel_miss, &ctx, true);
7894         *tunnel = ctx.tunnel;
7895         return ctx.tunnel ? 0 : -ENOMEM;
7896 }
7897
7898 void mlx5_release_tunnel_hub(struct mlx5_dev_ctx_shared *sh, uint16_t port_id)
7899 {
7900         struct mlx5_flow_tunnel_hub *thub = sh->tunnel_hub;
7901
7902         if (!thub)
7903                 return;
7904         if (!LIST_EMPTY(&thub->tunnels))
7905                 DRV_LOG(WARNING, "port %u tunnels present", port_id);
7906         mlx5_hlist_destroy(thub->groups);
7907         mlx5_free(thub);
7908 }
7909
7910 int mlx5_alloc_tunnel_hub(struct mlx5_dev_ctx_shared *sh)
7911 {
7912         int err;
7913         struct mlx5_flow_tunnel_hub *thub;
7914
7915         thub = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO, sizeof(*thub),
7916                            0, SOCKET_ID_ANY);
7917         if (!thub)
7918                 return -ENOMEM;
7919         LIST_INIT(&thub->tunnels);
7920         rte_spinlock_init(&thub->sl);
7921         thub->groups = mlx5_hlist_create("flow groups",
7922                                          rte_align32pow2(MLX5_MAX_TABLES), 0,
7923                                          0, mlx5_flow_tunnel_grp2tbl_create_cb,
7924                                          mlx5_flow_tunnel_grp2tbl_match_cb,
7925                                          mlx5_flow_tunnel_grp2tbl_remove_cb);
7926         if (!thub->groups) {
7927                 err = -rte_errno;
7928                 goto err;
7929         }
7930         thub->groups->ctx = sh;
7931         sh->tunnel_hub = thub;
7932
7933         return 0;
7934
7935 err:
7936         if (thub->groups)
7937                 mlx5_hlist_destroy(thub->groups);
7938         if (thub)
7939                 mlx5_free(thub);
7940         return err;
7941 }
7942
7943 static inline bool
7944 mlx5_flow_tunnel_validate(struct rte_eth_dev *dev,
7945                           struct rte_flow_tunnel *tunnel,
7946                           const char *err_msg)
7947 {
7948         err_msg = NULL;
7949         if (!is_tunnel_offload_active(dev)) {
7950                 err_msg = "tunnel offload was not activated";
7951                 goto out;
7952         } else if (!tunnel) {
7953                 err_msg = "no application tunnel";
7954                 goto out;
7955         }
7956
7957         switch (tunnel->type) {
7958         default:
7959                 err_msg = "unsupported tunnel type";
7960                 goto out;
7961         case RTE_FLOW_ITEM_TYPE_VXLAN:
7962                 break;
7963         }
7964
7965 out:
7966         return !err_msg;
7967 }
7968
7969 static int
7970 mlx5_flow_tunnel_decap_set(struct rte_eth_dev *dev,
7971                     struct rte_flow_tunnel *app_tunnel,
7972                     struct rte_flow_action **actions,
7973                     uint32_t *num_of_actions,
7974                     struct rte_flow_error *error)
7975 {
7976         int ret;
7977         struct mlx5_flow_tunnel *tunnel;
7978         const char *err_msg = NULL;
7979         bool verdict = mlx5_flow_tunnel_validate(dev, app_tunnel, err_msg);
7980
7981         if (!verdict)
7982                 return rte_flow_error_set(error, EINVAL,
7983                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
7984                                           err_msg);
7985         ret = mlx5_get_flow_tunnel(dev, app_tunnel, &tunnel);
7986         if (ret < 0) {
7987                 return rte_flow_error_set(error, ret,
7988                                           RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
7989                                           "failed to initialize pmd tunnel");
7990         }
7991         *actions = &tunnel->action;
7992         *num_of_actions = 1;
7993         return 0;
7994 }
7995
7996 static int
7997 mlx5_flow_tunnel_match(struct rte_eth_dev *dev,
7998                        struct rte_flow_tunnel *app_tunnel,
7999                        struct rte_flow_item **items,
8000                        uint32_t *num_of_items,
8001                        struct rte_flow_error *error)
8002 {
8003         int ret;
8004         struct mlx5_flow_tunnel *tunnel;
8005         const char *err_msg = NULL;
8006         bool verdict = mlx5_flow_tunnel_validate(dev, app_tunnel, err_msg);
8007
8008         if (!verdict)
8009                 return rte_flow_error_set(error, EINVAL,
8010                                           RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8011                                           err_msg);
8012         ret = mlx5_get_flow_tunnel(dev, app_tunnel, &tunnel);
8013         if (ret < 0) {
8014                 return rte_flow_error_set(error, ret,
8015                                           RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8016                                           "failed to initialize pmd tunnel");
8017         }
8018         *items = &tunnel->item;
8019         *num_of_items = 1;
8020         return 0;
8021 }
8022
8023 struct tunnel_db_element_release_ctx {
8024         struct rte_flow_item *items;
8025         struct rte_flow_action *actions;
8026         uint32_t num_elements;
8027         struct rte_flow_error *error;
8028         int ret;
8029 };
8030
8031 static bool
8032 tunnel_element_release_match(struct rte_eth_dev *dev,
8033                              struct mlx5_flow_tunnel *tunnel, const void *x)
8034 {
8035         const struct tunnel_db_element_release_ctx *ctx = x;
8036
8037         RTE_SET_USED(dev);
8038         if (ctx->num_elements != 1)
8039                 return false;
8040         else if (ctx->items)
8041                 return ctx->items == &tunnel->item;
8042         else if (ctx->actions)
8043                 return ctx->actions == &tunnel->action;
8044
8045         return false;
8046 }
8047
8048 static void
8049 tunnel_element_release_hit(struct rte_eth_dev *dev,
8050                            struct mlx5_flow_tunnel *tunnel, void *x)
8051 {
8052         struct tunnel_db_element_release_ctx *ctx = x;
8053         ctx->ret = 0;
8054         if (!__atomic_sub_fetch(&tunnel->refctn, 1, __ATOMIC_RELAXED))
8055                 mlx5_flow_tunnel_free(dev, tunnel);
8056 }
8057
8058 static void
8059 tunnel_element_release_miss(struct rte_eth_dev *dev, void *x)
8060 {
8061         struct tunnel_db_element_release_ctx *ctx = x;
8062         RTE_SET_USED(dev);
8063         ctx->ret = rte_flow_error_set(ctx->error, EINVAL,
8064                                       RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
8065                                       "invalid argument");
8066 }
8067
8068 static int
8069 mlx5_flow_tunnel_item_release(struct rte_eth_dev *dev,
8070                        struct rte_flow_item *pmd_items,
8071                        uint32_t num_items, struct rte_flow_error *err)
8072 {
8073         struct tunnel_db_element_release_ctx ctx = {
8074                 .items = pmd_items,
8075                 .actions = NULL,
8076                 .num_elements = num_items,
8077                 .error = err,
8078         };
8079
8080         mlx5_access_tunnel_offload_db(dev, tunnel_element_release_match,
8081                                       tunnel_element_release_hit,
8082                                       tunnel_element_release_miss, &ctx, false);
8083
8084         return ctx.ret;
8085 }
8086
8087 static int
8088 mlx5_flow_tunnel_action_release(struct rte_eth_dev *dev,
8089                          struct rte_flow_action *pmd_actions,
8090                          uint32_t num_actions, struct rte_flow_error *err)
8091 {
8092         struct tunnel_db_element_release_ctx ctx = {
8093                 .items = NULL,
8094                 .actions = pmd_actions,
8095                 .num_elements = num_actions,
8096                 .error = err,
8097         };
8098
8099         mlx5_access_tunnel_offload_db(dev, tunnel_element_release_match,
8100                                       tunnel_element_release_hit,
8101                                       tunnel_element_release_miss, &ctx, false);
8102
8103         return ctx.ret;
8104 }
8105
8106 static int
8107 mlx5_flow_tunnel_get_restore_info(struct rte_eth_dev *dev,
8108                                   struct rte_mbuf *m,
8109                                   struct rte_flow_restore_info *info,
8110                                   struct rte_flow_error *err)
8111 {
8112         uint64_t ol_flags = m->ol_flags;
8113         const struct mlx5_flow_tbl_data_entry *tble;
8114         const uint64_t mask = PKT_RX_FDIR | PKT_RX_FDIR_ID;
8115
8116         if (!is_tunnel_offload_active(dev)) {
8117                 info->flags = 0;
8118                 return 0;
8119         }
8120
8121         if ((ol_flags & mask) != mask)
8122                 goto err;
8123         tble = tunnel_mark_decode(dev, m->hash.fdir.hi);
8124         if (!tble) {
8125                 DRV_LOG(DEBUG, "port %u invalid miss tunnel mark %#x",
8126                         dev->data->port_id, m->hash.fdir.hi);
8127                 goto err;
8128         }
8129         MLX5_ASSERT(tble->tunnel);
8130         memcpy(&info->tunnel, &tble->tunnel->app_tunnel, sizeof(info->tunnel));
8131         info->group_id = tble->group_id;
8132         info->flags = RTE_FLOW_RESTORE_INFO_TUNNEL |
8133                       RTE_FLOW_RESTORE_INFO_GROUP_ID |
8134                       RTE_FLOW_RESTORE_INFO_ENCAPSULATED;
8135
8136         return 0;
8137
8138 err:
8139         return rte_flow_error_set(err, EINVAL,
8140                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
8141                                   "failed to get restore info");
8142 }
8143
8144 #else /* HAVE_IBV_FLOW_DV_SUPPORT */
8145 static int
8146 mlx5_flow_tunnel_decap_set(__rte_unused struct rte_eth_dev *dev,
8147                            __rte_unused struct rte_flow_tunnel *app_tunnel,
8148                            __rte_unused struct rte_flow_action **actions,
8149                            __rte_unused uint32_t *num_of_actions,
8150                            __rte_unused struct rte_flow_error *error)
8151 {
8152         return -ENOTSUP;
8153 }
8154
8155 static int
8156 mlx5_flow_tunnel_match(__rte_unused struct rte_eth_dev *dev,
8157                        __rte_unused struct rte_flow_tunnel *app_tunnel,
8158                        __rte_unused struct rte_flow_item **items,
8159                        __rte_unused uint32_t *num_of_items,
8160                        __rte_unused struct rte_flow_error *error)
8161 {
8162         return -ENOTSUP;
8163 }
8164
8165 static int
8166 mlx5_flow_tunnel_item_release(__rte_unused struct rte_eth_dev *dev,
8167                               __rte_unused struct rte_flow_item *pmd_items,
8168                               __rte_unused uint32_t num_items,
8169                               __rte_unused struct rte_flow_error *err)
8170 {
8171         return -ENOTSUP;
8172 }
8173
8174 static int
8175 mlx5_flow_tunnel_action_release(__rte_unused struct rte_eth_dev *dev,
8176                                 __rte_unused struct rte_flow_action *pmd_action,
8177                                 __rte_unused uint32_t num_actions,
8178                                 __rte_unused struct rte_flow_error *err)
8179 {
8180         return -ENOTSUP;
8181 }
8182
8183 static int
8184 mlx5_flow_tunnel_get_restore_info(__rte_unused struct rte_eth_dev *dev,
8185                                   __rte_unused struct rte_mbuf *m,
8186                                   __rte_unused struct rte_flow_restore_info *i,
8187                                   __rte_unused struct rte_flow_error *err)
8188 {
8189         return -ENOTSUP;
8190 }
8191
8192 static int
8193 flow_tunnel_add_default_miss(__rte_unused struct rte_eth_dev *dev,
8194                              __rte_unused struct rte_flow *flow,
8195                              __rte_unused const struct rte_flow_attr *attr,
8196                              __rte_unused const struct rte_flow_action *actions,
8197                              __rte_unused uint32_t flow_idx,
8198                              __rte_unused struct tunnel_default_miss_ctx *ctx,
8199                              __rte_unused struct rte_flow_error *error)
8200 {
8201         return -ENOTSUP;
8202 }
8203
8204 static struct mlx5_flow_tunnel *
8205 mlx5_find_tunnel_id(__rte_unused struct rte_eth_dev *dev,
8206                     __rte_unused uint32_t id)
8207 {
8208         return NULL;
8209 }
8210
8211 static void
8212 mlx5_flow_tunnel_free(__rte_unused struct rte_eth_dev *dev,
8213                       __rte_unused struct mlx5_flow_tunnel *tunnel)
8214 {
8215 }
8216
8217 static uint32_t
8218 tunnel_flow_group_to_flow_table(__rte_unused struct rte_eth_dev *dev,
8219                                 __rte_unused const struct mlx5_flow_tunnel *t,
8220                                 __rte_unused uint32_t group,
8221                                 __rte_unused uint32_t *table,
8222                                 struct rte_flow_error *error)
8223 {
8224         return rte_flow_error_set(error, ENOTSUP,
8225                                   RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
8226                                   "tunnel offload requires DV support");
8227 }
8228
8229 void
8230 mlx5_release_tunnel_hub(__rte_unused struct mlx5_dev_ctx_shared *sh,
8231                         __rte_unused  uint16_t port_id)
8232 {
8233 }
8234 #endif /* HAVE_IBV_FLOW_DV_SUPPORT */