ethdev: add namespace
[dpdk.git] / drivers / net / mvneta / mvneta_ethdev.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2018 Marvell International Ltd.
3  * Copyright(c) 2018 Semihalf.
4  * All rights reserved.
5  */
6
7 #include <rte_string_fns.h>
8 #include <ethdev_driver.h>
9 #include <rte_kvargs.h>
10 #include <rte_bus_vdev.h>
11
12 #include <stdio.h>
13 #include <fcntl.h>
14 #include <linux/ethtool.h>
15 #include <linux/sockios.h>
16 #include <net/if.h>
17 #include <net/if_arp.h>
18 #include <sys/ioctl.h>
19 #include <sys/socket.h>
20 #include <sys/stat.h>
21 #include <sys/types.h>
22
23 #include <rte_mvep_common.h>
24
25 #include "mvneta_rxtx.h"
26
27
28 #define MVNETA_IFACE_NAME_ARG "iface"
29
30 #define MVNETA_PKT_SIZE_MAX (16382 - MV_MH_SIZE) /* 9700B */
31 #define MVNETA_DEFAULT_MTU 1500
32
33 #define MVNETA_MAC_ADDRS_MAX 256 /*16 UC, 256 IP, 256 MC/BC */
34 /** Maximum length of a match string */
35 #define MVNETA_MATCH_LEN 16
36
37 static const char * const valid_args[] = {
38         MVNETA_IFACE_NAME_ARG,
39         NULL
40 };
41
42 struct mvneta_ifnames {
43         const char *names[NETA_NUM_ETH_PPIO];
44         int idx;
45 };
46
47 static int mvneta_dev_num;
48
49 static int mvneta_stats_reset(struct rte_eth_dev *dev);
50 static int rte_pmd_mvneta_remove(struct rte_vdev_device *vdev);
51
52
53 /**
54  * Deinitialize packet processor.
55  */
56 static void
57 mvneta_neta_deinit(void)
58 {
59         neta_deinit();
60 }
61
62 /**
63  * Initialize packet processor.
64  *
65  * @return
66  *   0 on success, negative error value otherwise.
67  */
68 static int
69 mvneta_neta_init(void)
70 {
71         return neta_init();
72 }
73
74 /**
75  * Callback used by rte_kvargs_process() during argument parsing.
76  *
77  * @param key
78  *   Pointer to the parsed key (unused).
79  * @param value
80  *   Pointer to the parsed value.
81  * @param extra_args
82  *   Pointer to the extra arguments which contains address of the
83  *   table of pointers to parsed interface names.
84  *
85  * @return
86  *   Always 0.
87  */
88 static int
89 mvneta_ifnames_get(const char *key __rte_unused, const char *value,
90                  void *extra_args)
91 {
92         struct mvneta_ifnames *ifnames = extra_args;
93
94         ifnames->names[ifnames->idx++] = value;
95
96         return 0;
97 }
98
99 /**
100  * Ethernet device configuration.
101  *
102  * Prepare the driver for a given number of TX and RX queues and
103  * configure RSS if supported.
104  *
105  * @param dev
106  *   Pointer to Ethernet device structure.
107  *
108  * @return
109  *   0 on success, negative error value otherwise.
110  */
111 static int
112 mvneta_dev_configure(struct rte_eth_dev *dev)
113 {
114         struct mvneta_priv *priv = dev->data->dev_private;
115         struct neta_ppio_params *ppio_params;
116
117         if (dev->data->dev_conf.rxmode.mq_mode != RTE_ETH_MQ_RX_NONE) {
118                 MVNETA_LOG(INFO, "Unsupported RSS and rx multi queue mode %d",
119                         dev->data->dev_conf.rxmode.mq_mode);
120                 if (dev->data->nb_rx_queues > 1)
121                         return -EINVAL;
122         }
123
124         if (dev->data->dev_conf.rxmode.split_hdr_size) {
125                 MVNETA_LOG(INFO, "Split headers not supported");
126                 return -EINVAL;
127         }
128
129         if (dev->data->dev_conf.txmode.offloads & RTE_ETH_TX_OFFLOAD_MULTI_SEGS)
130                 priv->multiseg = 1;
131
132         ppio_params = &priv->ppio_params;
133         ppio_params->outqs_params.num_outqs = dev->data->nb_tx_queues;
134         /* Default: 1 TC, no QoS supported. */
135         ppio_params->inqs_params.num_tcs = 1;
136         ppio_params->inqs_params.tcs_params[0].pkt_offset = MRVL_NETA_PKT_OFFS;
137         priv->ppio_id = dev->data->port_id;
138
139         return 0;
140 }
141
142 /**
143  * DPDK callback to get information about the device.
144  *
145  * @param dev
146  *   Pointer to Ethernet device structure (unused).
147  * @param info
148  *   Info structure output buffer.
149  */
150 static int
151 mvneta_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
152                    struct rte_eth_dev_info *info)
153 {
154         info->speed_capa = RTE_ETH_LINK_SPEED_10M |
155                            RTE_ETH_LINK_SPEED_100M |
156                            RTE_ETH_LINK_SPEED_1G |
157                            RTE_ETH_LINK_SPEED_2_5G;
158
159         info->max_rx_queues = MRVL_NETA_RXQ_MAX;
160         info->max_tx_queues = MRVL_NETA_TXQ_MAX;
161         info->max_mac_addrs = MVNETA_MAC_ADDRS_MAX;
162
163         info->rx_desc_lim.nb_max = MRVL_NETA_RXD_MAX;
164         info->rx_desc_lim.nb_min = MRVL_NETA_RXD_MIN;
165         info->rx_desc_lim.nb_align = MRVL_NETA_RXD_ALIGN;
166
167         info->tx_desc_lim.nb_max = MRVL_NETA_TXD_MAX;
168         info->tx_desc_lim.nb_min = MRVL_NETA_TXD_MIN;
169         info->tx_desc_lim.nb_align = MRVL_NETA_TXD_ALIGN;
170
171         info->rx_offload_capa = MVNETA_RX_OFFLOADS;
172         info->rx_queue_offload_capa = MVNETA_RX_OFFLOADS;
173
174         info->tx_offload_capa =  MVNETA_TX_OFFLOADS;
175         info->tx_queue_offload_capa =  MVNETA_TX_OFFLOADS;
176
177         /* By default packets are dropped if no descriptors are available */
178         info->default_rxconf.rx_drop_en = 1;
179         /* Deferred tx queue start is not supported */
180         info->default_txconf.tx_deferred_start = 0;
181         info->default_txconf.offloads = 0;
182
183         info->max_rx_pktlen = MVNETA_PKT_SIZE_MAX;
184
185         return 0;
186 }
187
188 /**
189  * Return supported packet types.
190  *
191  * @param dev
192  *   Pointer to Ethernet device structure (unused).
193  *
194  * @return
195  *   Const pointer to the table with supported packet types.
196  */
197 static const uint32_t *
198 mvneta_dev_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
199 {
200         static const uint32_t ptypes[] = {
201                 RTE_PTYPE_L2_ETHER,
202                 RTE_PTYPE_L2_ETHER_VLAN,
203                 RTE_PTYPE_L3_IPV4,
204                 RTE_PTYPE_L3_IPV6,
205                 RTE_PTYPE_L4_TCP,
206                 RTE_PTYPE_L4_UDP
207         };
208
209         return ptypes;
210 }
211
212 /**
213  * DPDK callback to change the MTU.
214  *
215  * Setting the MTU affects hardware MRU (packets larger than the MRU
216  * will be dropped).
217  *
218  * @param dev
219  *   Pointer to Ethernet device structure.
220  * @param mtu
221  *   New MTU.
222  *
223  * @return
224  *   0 on success, negative error value otherwise.
225  */
226 static int
227 mvneta_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
228 {
229         struct mvneta_priv *priv = dev->data->dev_private;
230         uint16_t mbuf_data_size = 0; /* SW buffer size */
231         uint16_t mru;
232         int ret;
233
234         mru = MRVL_NETA_MTU_TO_MRU(mtu);
235         /*
236          * min_rx_buf_size is equal to mbuf data size
237          * if pmd didn't set it differently
238          */
239         mbuf_data_size = dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM;
240         /* Prevent PMD from:
241          * - setting mru greater than the mbuf size resulting in
242          * hw and sw buffer size mismatch
243          * - setting mtu that requires the support of scattered packets
244          * when this feature has not been enabled/supported so far.
245          */
246         if (!dev->data->scattered_rx &&
247             (mru + MRVL_NETA_PKT_OFFS > mbuf_data_size)) {
248                 mru = mbuf_data_size - MRVL_NETA_PKT_OFFS;
249                 mtu = MRVL_NETA_MRU_TO_MTU(mru);
250                 MVNETA_LOG(WARNING, "MTU too big, max MTU possible limitted by"
251                         " current mbuf size: %u. Set MTU to %u, MRU to %u",
252                         mbuf_data_size, mtu, mru);
253         }
254
255         if (mtu < RTE_ETHER_MIN_MTU || mru > MVNETA_PKT_SIZE_MAX) {
256                 MVNETA_LOG(ERR, "Invalid MTU [%u] or MRU [%u]", mtu, mru);
257                 return -EINVAL;
258         }
259
260         if (!priv->ppio)
261                 /* It is OK. New MTU will be set later on mvneta_dev_start */
262                 return 0;
263
264         ret = neta_ppio_set_mru(priv->ppio, mru);
265         if (ret) {
266                 MVNETA_LOG(ERR, "Failed to change MRU");
267                 return ret;
268         }
269
270         ret = neta_ppio_set_mtu(priv->ppio, mtu);
271         if (ret) {
272                 MVNETA_LOG(ERR, "Failed to change MTU");
273                 return ret;
274         }
275         MVNETA_LOG(INFO, "MTU changed to %u, MRU = %u", mtu, mru);
276
277         return 0;
278 }
279
280 /**
281  * DPDK callback to bring the link up.
282  *
283  * @param dev
284  *   Pointer to Ethernet device structure.
285  *
286  * @return
287  *   0 on success, negative error value otherwise.
288  */
289 static int
290 mvneta_dev_set_link_up(struct rte_eth_dev *dev)
291 {
292         struct mvneta_priv *priv = dev->data->dev_private;
293
294         if (!priv->ppio)
295                 return 0;
296
297         return neta_ppio_enable(priv->ppio);
298 }
299
300 /**
301  * DPDK callback to bring the link down.
302  *
303  * @param dev
304  *   Pointer to Ethernet device structure.
305  *
306  * @return
307  *   0 on success, negative error value otherwise.
308  */
309 static int
310 mvneta_dev_set_link_down(struct rte_eth_dev *dev)
311 {
312         struct mvneta_priv *priv = dev->data->dev_private;
313
314         if (!priv->ppio)
315                 return 0;
316
317         return neta_ppio_disable(priv->ppio);
318 }
319
320 /**
321  * DPDK callback to start the device.
322  *
323  * @param dev
324  *   Pointer to Ethernet device structure.
325  *
326  * @return
327  *   0 on success, negative errno value on failure.
328  */
329 static int
330 mvneta_dev_start(struct rte_eth_dev *dev)
331 {
332         struct mvneta_priv *priv = dev->data->dev_private;
333         char match[MVNETA_MATCH_LEN];
334         int ret = 0, i;
335
336         if (priv->ppio)
337                 return mvneta_dev_set_link_up(dev);
338
339         strlcpy(match, dev->data->name, sizeof(match));
340         priv->ppio_params.match = match;
341         priv->ppio_params.inqs_params.mtu = dev->data->mtu;
342
343         ret = neta_ppio_init(&priv->ppio_params, &priv->ppio);
344         if (ret) {
345                 MVNETA_LOG(ERR, "Failed to init ppio");
346                 return ret;
347         }
348         priv->ppio_id = priv->ppio->port_id;
349
350         mvneta_stats_reset(dev);
351
352         /*
353          * In case there are some some stale uc/mc mac addresses flush them
354          * here. It cannot be done during mvneta_dev_close() as port information
355          * is already gone at that point (due to neta_ppio_deinit() in
356          * mvneta_dev_stop()).
357          */
358         if (!priv->uc_mc_flushed) {
359                 ret = neta_ppio_flush_mac_addrs(priv->ppio, 0, 1);
360                 if (ret) {
361                         MVNETA_LOG(ERR,
362                                 "Failed to flush uc/mc filter list");
363                         goto out;
364                 }
365                 priv->uc_mc_flushed = 1;
366         }
367
368         ret = mvneta_alloc_rx_bufs(dev);
369         if (ret)
370                 goto out;
371
372         ret = mvneta_mtu_set(dev, dev->data->mtu);
373         if (ret) {
374                 MVNETA_LOG(ERR, "Failed to set MTU %d", dev->data->mtu);
375                 goto out;
376         }
377
378         ret = mvneta_dev_set_link_up(dev);
379         if (ret) {
380                 MVNETA_LOG(ERR, "Failed to set link up");
381                 goto out;
382         }
383
384         /* start tx queues */
385         for (i = 0; i < dev->data->nb_tx_queues; i++)
386                 dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
387
388         mvneta_set_tx_function(dev);
389
390         return 0;
391
392 out:
393         MVNETA_LOG(ERR, "Failed to start device");
394         neta_ppio_deinit(priv->ppio);
395         return ret;
396 }
397
398 /**
399  * DPDK callback to stop the device.
400  *
401  * @param dev
402  *   Pointer to Ethernet device structure.
403  */
404 static int
405 mvneta_dev_stop(struct rte_eth_dev *dev)
406 {
407         struct mvneta_priv *priv = dev->data->dev_private;
408
409         dev->data->dev_started = 0;
410
411         if (!priv->ppio)
412                 return 0;
413
414         mvneta_dev_set_link_down(dev);
415         mvneta_flush_queues(dev);
416         neta_ppio_deinit(priv->ppio);
417
418         priv->ppio = NULL;
419
420         return 0;
421 }
422
423 /**
424  * DPDK callback to close the device.
425  *
426  * @param dev
427  *   Pointer to Ethernet device structure.
428  */
429 static int
430 mvneta_dev_close(struct rte_eth_dev *dev)
431 {
432         struct mvneta_priv *priv = dev->data->dev_private;
433         int i, ret = 0;
434
435         if (rte_eal_process_type() != RTE_PROC_PRIMARY)
436                 return 0;
437
438         if (priv->ppio)
439                 ret = mvneta_dev_stop(dev);
440
441         for (i = 0; i < dev->data->nb_rx_queues; i++) {
442                 mvneta_rx_queue_release(dev, i);
443                 dev->data->rx_queues[i] = NULL;
444         }
445
446         for (i = 0; i < dev->data->nb_tx_queues; i++) {
447                 mvneta_tx_queue_release(dev, i);
448                 dev->data->tx_queues[i] = NULL;
449         }
450
451         mvneta_dev_num--;
452
453         if (mvneta_dev_num == 0) {
454                 MVNETA_LOG(INFO, "Perform MUSDK deinit");
455                 mvneta_neta_deinit();
456                 rte_mvep_deinit(MVEP_MOD_T_NETA);
457         }
458
459         return ret;
460 }
461
462 /**
463  * DPDK callback to retrieve physical link information.
464  *
465  * @param dev
466  *   Pointer to Ethernet device structure.
467  * @param wait_to_complete
468  *   Wait for request completion (ignored).
469  *
470  * @return
471  *   0 on success, negative error value otherwise.
472  */
473 static int
474 mvneta_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
475 {
476         /*
477          * TODO
478          * once MUSDK provides necessary API use it here
479          */
480         struct mvneta_priv *priv = dev->data->dev_private;
481         struct ethtool_cmd edata;
482         struct ifreq req;
483         int ret, fd, link_up;
484
485         if (!priv->ppio)
486                 return -EPERM;
487
488         edata.cmd = ETHTOOL_GSET;
489
490         strcpy(req.ifr_name, dev->data->name);
491         req.ifr_data = (void *)&edata;
492
493         fd = socket(AF_INET, SOCK_DGRAM, 0);
494         if (fd == -1)
495                 return -EFAULT;
496         ret = ioctl(fd, SIOCETHTOOL, &req);
497         if (ret == -1) {
498                 close(fd);
499                 return -EFAULT;
500         }
501
502         close(fd);
503
504         switch (ethtool_cmd_speed(&edata)) {
505         case SPEED_10:
506                 dev->data->dev_link.link_speed = RTE_ETH_SPEED_NUM_10M;
507                 break;
508         case SPEED_100:
509                 dev->data->dev_link.link_speed = RTE_ETH_SPEED_NUM_100M;
510                 break;
511         case SPEED_1000:
512                 dev->data->dev_link.link_speed = RTE_ETH_SPEED_NUM_1G;
513                 break;
514         case SPEED_2500:
515                 dev->data->dev_link.link_speed = RTE_ETH_SPEED_NUM_2_5G;
516                 break;
517         default:
518                 dev->data->dev_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
519         }
520
521         dev->data->dev_link.link_duplex = edata.duplex ? RTE_ETH_LINK_FULL_DUPLEX :
522                                                          RTE_ETH_LINK_HALF_DUPLEX;
523         dev->data->dev_link.link_autoneg = edata.autoneg ? RTE_ETH_LINK_AUTONEG :
524                                                            RTE_ETH_LINK_FIXED;
525
526         neta_ppio_get_link_state(priv->ppio, &link_up);
527         dev->data->dev_link.link_status = link_up ? RTE_ETH_LINK_UP : RTE_ETH_LINK_DOWN;
528
529         return 0;
530 }
531
532 /**
533  * DPDK callback to enable promiscuous mode.
534  *
535  * @param dev
536  *   Pointer to Ethernet device structure.
537  *
538  * @return
539  *   always 0
540  */
541 static int
542 mvneta_promiscuous_enable(struct rte_eth_dev *dev)
543 {
544         struct mvneta_priv *priv = dev->data->dev_private;
545         int ret, en;
546
547         if (!priv->ppio)
548                 return 0;
549
550         neta_ppio_get_promisc(priv->ppio, &en);
551         if (en) {
552                 MVNETA_LOG(INFO, "Promiscuous already enabled");
553                 return 0;
554         }
555
556         ret = neta_ppio_set_promisc(priv->ppio, 1);
557         if (ret)
558                 MVNETA_LOG(ERR, "Failed to enable promiscuous mode");
559
560         return 0;
561 }
562
563 /**
564  * DPDK callback to disable allmulticast mode.
565  *
566  * @param dev
567  *   Pointer to Ethernet device structure.
568  *
569  * @return
570  *   always 0
571  */
572 static int
573 mvneta_promiscuous_disable(struct rte_eth_dev *dev)
574 {
575         struct mvneta_priv *priv = dev->data->dev_private;
576         int ret, en;
577
578         if (!priv->ppio)
579                 return 0;
580
581         neta_ppio_get_promisc(priv->ppio, &en);
582         if (!en) {
583                 MVNETA_LOG(INFO, "Promiscuous already disabled");
584                 return 0;
585         }
586
587         ret = neta_ppio_set_promisc(priv->ppio, 0);
588         if (ret)
589                 MVNETA_LOG(ERR, "Failed to disable promiscuous mode");
590
591         return 0;
592 }
593
594 /**
595  * DPDK callback to remove a MAC address.
596  *
597  * @param dev
598  *   Pointer to Ethernet device structure.
599  * @param index
600  *   MAC address index.
601  */
602 static void
603 mvneta_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
604 {
605         struct mvneta_priv *priv = dev->data->dev_private;
606         char buf[RTE_ETHER_ADDR_FMT_SIZE];
607         int ret;
608
609         if (!priv->ppio)
610                 return;
611
612         ret = neta_ppio_remove_mac_addr(priv->ppio,
613                                        dev->data->mac_addrs[index].addr_bytes);
614         if (ret) {
615                 rte_ether_format_addr(buf, sizeof(buf),
616                                   &dev->data->mac_addrs[index]);
617                 MVNETA_LOG(ERR, "Failed to remove mac %s", buf);
618         }
619 }
620
621 /**
622  * DPDK callback to add a MAC address.
623  *
624  * @param dev
625  *   Pointer to Ethernet device structure.
626  * @param mac_addr
627  *   MAC address to register.
628  * @param index
629  *   MAC address index.
630  * @param vmdq
631  *   VMDq pool index to associate address with (unused).
632  *
633  * @return
634  *   0 on success, negative error value otherwise.
635  */
636 static int
637 mvneta_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
638                   uint32_t index, uint32_t vmdq __rte_unused)
639 {
640         struct mvneta_priv *priv = dev->data->dev_private;
641         char buf[RTE_ETHER_ADDR_FMT_SIZE];
642         int ret;
643
644         if (index == 0)
645                 /* For setting index 0, mrvl_mac_addr_set() should be used.*/
646                 return -1;
647
648         if (!priv->ppio)
649                 return 0;
650
651         ret = neta_ppio_add_mac_addr(priv->ppio, mac_addr->addr_bytes);
652         if (ret) {
653                 rte_ether_format_addr(buf, sizeof(buf), mac_addr);
654                 MVNETA_LOG(ERR, "Failed to add mac %s", buf);
655                 return -1;
656         }
657
658         return 0;
659 }
660
661 /**
662  * DPDK callback to set the primary MAC address.
663  *
664  * @param dev
665  *   Pointer to Ethernet device structure.
666  * @param mac_addr
667  *   MAC address to register.
668  */
669 static int
670 mvneta_mac_addr_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
671 {
672         struct mvneta_priv *priv = dev->data->dev_private;
673         int ret;
674
675         if (!priv->ppio)
676                 return -EINVAL;
677
678         ret = neta_ppio_set_mac_addr(priv->ppio, mac_addr->addr_bytes);
679         if (ret) {
680                 char buf[RTE_ETHER_ADDR_FMT_SIZE];
681                 rte_ether_format_addr(buf, sizeof(buf), mac_addr);
682                 MVNETA_LOG(ERR, "Failed to set mac to %s", buf);
683         }
684         return 0;
685 }
686
687 /**
688  * DPDK callback to get device statistics.
689  *
690  * @param dev
691  *   Pointer to Ethernet device structure.
692  * @param stats
693  *   Stats structure output buffer.
694  *
695  * @return
696  *   0 on success, negative error value otherwise.
697  */
698 static int
699 mvneta_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
700 {
701         struct mvneta_priv *priv = dev->data->dev_private;
702         struct neta_ppio_statistics ppio_stats;
703         unsigned int ret;
704
705         if (!priv->ppio)
706                 return -EPERM;
707
708         ret = neta_ppio_get_statistics(priv->ppio, &ppio_stats);
709         if (unlikely(ret)) {
710                 MVNETA_LOG(ERR, "Failed to update port statistics");
711                 return ret;
712         }
713
714         stats->ipackets += ppio_stats.rx_packets +
715                         ppio_stats.rx_broadcast_packets +
716                         ppio_stats.rx_multicast_packets -
717                         priv->prev_stats.ipackets;
718         stats->opackets += ppio_stats.tx_packets +
719                         ppio_stats.tx_broadcast_packets +
720                         ppio_stats.tx_multicast_packets -
721                         priv->prev_stats.opackets;
722         stats->ibytes += ppio_stats.rx_bytes - priv->prev_stats.ibytes;
723         stats->obytes += ppio_stats.tx_bytes - priv->prev_stats.obytes;
724         stats->imissed += ppio_stats.rx_discard +
725                           ppio_stats.rx_overrun -
726                           priv->prev_stats.imissed;
727         stats->ierrors = ppio_stats.rx_packets_err -
728                         priv->prev_stats.ierrors;
729         stats->oerrors = ppio_stats.tx_errors - priv->prev_stats.oerrors;
730
731         return 0;
732 }
733
734 /**
735  * DPDK callback to clear device statistics.
736  *
737  * @param dev
738  *   Pointer to Ethernet device structure.
739  *
740  * @return
741  *   0 on success, negative error value otherwise.
742  */
743 static int
744 mvneta_stats_reset(struct rte_eth_dev *dev)
745 {
746         struct mvneta_priv *priv = dev->data->dev_private;
747         unsigned int ret;
748
749         if (!priv->ppio)
750                 return 0;
751
752         ret = mvneta_stats_get(dev, &priv->prev_stats);
753         if (unlikely(ret))
754                 MVNETA_LOG(ERR, "Failed to reset port statistics");
755
756         return ret;
757 }
758
759
760 static const struct eth_dev_ops mvneta_ops = {
761         .dev_configure = mvneta_dev_configure,
762         .dev_start = mvneta_dev_start,
763         .dev_stop = mvneta_dev_stop,
764         .dev_set_link_up = mvneta_dev_set_link_up,
765         .dev_set_link_down = mvneta_dev_set_link_down,
766         .dev_close = mvneta_dev_close,
767         .link_update = mvneta_link_update,
768         .promiscuous_enable = mvneta_promiscuous_enable,
769         .promiscuous_disable = mvneta_promiscuous_disable,
770         .mac_addr_remove = mvneta_mac_addr_remove,
771         .mac_addr_add = mvneta_mac_addr_add,
772         .mac_addr_set = mvneta_mac_addr_set,
773         .mtu_set = mvneta_mtu_set,
774         .stats_get = mvneta_stats_get,
775         .stats_reset = mvneta_stats_reset,
776         .dev_infos_get = mvneta_dev_infos_get,
777         .dev_supported_ptypes_get = mvneta_dev_supported_ptypes_get,
778         .rxq_info_get = mvneta_rxq_info_get,
779         .txq_info_get = mvneta_txq_info_get,
780         .rx_queue_setup = mvneta_rx_queue_setup,
781         .rx_queue_release = mvneta_rx_queue_release,
782         .tx_queue_setup = mvneta_tx_queue_setup,
783         .tx_queue_release = mvneta_tx_queue_release,
784 };
785
786 /**
787  * Create device representing Ethernet port.
788  *
789  * @param name
790  *   Pointer to the port's name.
791  *
792  * @return
793  *   0 on success, negative error value otherwise.
794  */
795 static int
796 mvneta_eth_dev_create(struct rte_vdev_device *vdev, const char *name)
797 {
798         int ret, fd = socket(AF_INET, SOCK_DGRAM, 0);
799         struct rte_eth_dev *eth_dev;
800         struct mvneta_priv *priv;
801         struct ifreq req;
802
803         eth_dev = rte_eth_dev_allocate(name);
804         if (!eth_dev)
805                 return -ENOMEM;
806
807         priv = rte_zmalloc_socket(name, sizeof(*priv), 0, rte_socket_id());
808         if (!priv) {
809                 ret = -ENOMEM;
810                 goto out_free;
811         }
812         eth_dev->data->dev_private = priv;
813
814         eth_dev->data->mac_addrs =
815                 rte_zmalloc("mac_addrs",
816                             RTE_ETHER_ADDR_LEN * MVNETA_MAC_ADDRS_MAX, 0);
817         if (!eth_dev->data->mac_addrs) {
818                 MVNETA_LOG(ERR, "Failed to allocate space for eth addrs");
819                 ret = -ENOMEM;
820                 goto out_free;
821         }
822
823         memset(&req, 0, sizeof(req));
824         strcpy(req.ifr_name, name);
825         ret = ioctl(fd, SIOCGIFHWADDR, &req);
826         if (ret)
827                 goto out_free;
828
829         memcpy(eth_dev->data->mac_addrs[0].addr_bytes,
830                req.ifr_addr.sa_data, RTE_ETHER_ADDR_LEN);
831
832         eth_dev->device = &vdev->device;
833         eth_dev->rx_pkt_burst = mvneta_rx_pkt_burst;
834         mvneta_set_tx_function(eth_dev);
835         eth_dev->dev_ops = &mvneta_ops;
836
837         rte_eth_dev_probing_finish(eth_dev);
838         return 0;
839 out_free:
840         rte_eth_dev_release_port(eth_dev);
841
842         return ret;
843 }
844
845 /**
846  * Cleanup previously created device representing Ethernet port.
847  *
848  * @param eth_dev
849  *   Pointer to the corresponding rte_eth_dev structure.
850  */
851 static void
852 mvneta_eth_dev_destroy(struct rte_eth_dev *eth_dev)
853 {
854         rte_eth_dev_release_port(eth_dev);
855 }
856
857 /**
858  * Cleanup previously created device representing Ethernet port.
859  *
860  * @param name
861  *   Pointer to the port name.
862  */
863 static void
864 mvneta_eth_dev_destroy_name(const char *name)
865 {
866         struct rte_eth_dev *eth_dev;
867
868         eth_dev = rte_eth_dev_allocated(name);
869         if (!eth_dev)
870                 return;
871
872         mvneta_eth_dev_destroy(eth_dev);
873 }
874
875 /**
876  * DPDK callback to register the virtual device.
877  *
878  * @param vdev
879  *   Pointer to the virtual device.
880  *
881  * @return
882  *   0 on success, negative error value otherwise.
883  */
884 static int
885 rte_pmd_mvneta_probe(struct rte_vdev_device *vdev)
886 {
887         struct rte_kvargs *kvlist;
888         struct mvneta_ifnames ifnames;
889         int ret = -EINVAL;
890         uint32_t i, ifnum;
891         const char *params;
892
893         params = rte_vdev_device_args(vdev);
894         if (!params)
895                 return -EINVAL;
896
897         kvlist = rte_kvargs_parse(params, valid_args);
898         if (!kvlist)
899                 return -EINVAL;
900
901         ifnum = rte_kvargs_count(kvlist, MVNETA_IFACE_NAME_ARG);
902         if (ifnum > RTE_DIM(ifnames.names))
903                 goto out_free_kvlist;
904
905         ifnames.idx = 0;
906         rte_kvargs_process(kvlist, MVNETA_IFACE_NAME_ARG,
907                            mvneta_ifnames_get, &ifnames);
908
909         /*
910          * The below system initialization should be done only once,
911          * on the first provided configuration file
912          */
913         if (mvneta_dev_num)
914                 goto init_devices;
915
916         MVNETA_LOG(INFO, "Perform MUSDK initializations");
917
918         ret = rte_mvep_init(MVEP_MOD_T_NETA, kvlist);
919         if (ret)
920                 goto out_free_kvlist;
921
922         ret = mvneta_neta_init();
923         if (ret) {
924                 MVNETA_LOG(ERR, "Failed to init NETA!");
925                 rte_mvep_deinit(MVEP_MOD_T_NETA);
926                 goto out_free_kvlist;
927         }
928
929 init_devices:
930         for (i = 0; i < ifnum; i++) {
931                 MVNETA_LOG(INFO, "Creating %s", ifnames.names[i]);
932                 ret = mvneta_eth_dev_create(vdev, ifnames.names[i]);
933                 if (ret)
934                         goto out_cleanup;
935
936                 mvneta_dev_num++;
937         }
938
939         rte_kvargs_free(kvlist);
940
941         return 0;
942 out_cleanup:
943         rte_pmd_mvneta_remove(vdev);
944
945 out_free_kvlist:
946         rte_kvargs_free(kvlist);
947
948         return ret;
949 }
950
951 /**
952  * DPDK callback to remove virtual device.
953  *
954  * @param vdev
955  *   Pointer to the removed virtual device.
956  *
957  * @return
958  *   0 on success, negative error value otherwise.
959  */
960 static int
961 rte_pmd_mvneta_remove(struct rte_vdev_device *vdev)
962 {
963         uint16_t port_id;
964         int ret = 0;
965
966         RTE_ETH_FOREACH_DEV(port_id) {
967                 if (rte_eth_devices[port_id].device != &vdev->device)
968                         continue;
969                 ret |= rte_eth_dev_close(port_id);
970         }
971
972         return ret == 0 ? 0 : -EIO;
973 }
974
975 static struct rte_vdev_driver pmd_mvneta_drv = {
976         .probe = rte_pmd_mvneta_probe,
977         .remove = rte_pmd_mvneta_remove,
978 };
979
980 RTE_PMD_REGISTER_VDEV(net_mvneta, pmd_mvneta_drv);
981 RTE_PMD_REGISTER_PARAM_STRING(net_mvneta, "iface=<ifc>");
982 RTE_LOG_REGISTER_DEFAULT(mvneta_logtype, NOTICE);