examples/l2fwd-event/l2fwd_common.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(C) 2019 Marvell International Ltd.
   3  */
   4
   5 #include "l2fwd_common.h"
   6
   7 int
   8 l2fwd_event_init_ports(struct l2fwd_resources *rsrc)
   9 {
  10         uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
  11         uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
  12         struct rte_eth_conf port_conf = {
  13                 .rxmode = {
  14                         .split_hdr_size = 0,
  15                 },
  16                 .txmode = {
  17                         .mq_mode = ETH_MQ_TX_NONE,
  18                 },
  19         };
  20         uint16_t nb_ports_available = 0;
  21         uint16_t port_id;
  22         int ret;
  23
  24         if (rsrc->event_mode) {
  25                 port_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
  26                 port_conf.rx_adv_conf.rss_conf.rss_key = NULL;
  27                 port_conf.rx_adv_conf.rss_conf.rss_hf = ETH_RSS_IP;
  28         }
  29
  30         /* Initialise each port */
  31         RTE_ETH_FOREACH_DEV(port_id) {
  32                 struct rte_eth_conf local_port_conf = port_conf;
  33                 struct rte_eth_dev_info dev_info;
  34                 struct rte_eth_rxconf rxq_conf;
  35                 struct rte_eth_txconf txq_conf;
  36
  37                 /* skip ports that are not enabled */
  38                 if ((rsrc->enabled_port_mask & (1 << port_id)) == 0) {
  39                         printf("Skipping disabled port %u\n", port_id);
  40                         continue;
  41                 }
  42                 nb_ports_available++;
  43
  44                 /* init port */
  45                 printf("Initializing port %u... ", port_id);
  46                 fflush(stdout);
  47
  48                 ret = rte_eth_dev_info_get(port_id, &dev_info);
  49                 if (ret != 0)
  50                         rte_panic("Error during getting device (port %u) info: %s\n",
  51                                   port_id, strerror(-ret));
  52                 local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
  53                         dev_info.flow_type_rss_offloads;
  54                 if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
  55                                 port_conf.rx_adv_conf.rss_conf.rss_hf) {
  56                         printf("Port %u modified RSS hash function based on hardware support,"
  57                                "requested:%#"PRIx64" configured:%#"PRIx64"",
  58                                 port_id,
  59                                 port_conf.rx_adv_conf.rss_conf.rss_hf,
  60                                 local_port_conf.rx_adv_conf.rss_conf.rss_hf);
  61                 }
  62
  63                 if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
  64                         local_port_conf.txmode.offloads |=
  65                                 DEV_TX_OFFLOAD_MBUF_FAST_FREE;
  66                 /* Configure RX and TX queue. 8< */
  67                 ret = rte_eth_dev_configure(port_id, 1, 1, &local_port_conf);
  68                 if (ret < 0)
  69                         rte_panic("Cannot configure device: err=%d, port=%u\n",
  70                                   ret, port_id);
  71                 /* >8 End of configuration RX and TX queue. */
  72
  73                 ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd,
  74                                                        &nb_txd);
  75                 if (ret < 0)
  76                         rte_panic("Cannot adjust number of descriptors: err=%d, port=%u\n",
  77                                   ret, port_id);
  78
  79                 rte_eth_macaddr_get(port_id, &rsrc->eth_addr[port_id]);
  80
  81                 /* init one RX queue */
  82                 fflush(stdout);
  83                 rxq_conf = dev_info.default_rxconf;
  84                 rxq_conf.offloads = local_port_conf.rxmode.offloads;
  85                 /* Using lcore to poll one or several ports. 8< */
  86                 ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
  87                                              rte_eth_dev_socket_id(port_id),
  88                                              &rxq_conf,
  89                                              rsrc->pktmbuf_pool);
  90                 if (ret < 0)
  91                         rte_panic("rte_eth_rx_queue_setup:err=%d, port=%u\n",
  92                                   ret, port_id);
  93
  94                 /* >8 End of using lcore to poll one or several ports. */
  95
  96                 /* Init one TX queue on each port. 8< */
  97                 fflush(stdout);
  98                 txq_conf = dev_info.default_txconf;
  99                 txq_conf.offloads = local_port_conf.txmode.offloads;
 100                 ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
 101                                 rte_eth_dev_socket_id(port_id),
 102                                 &txq_conf);
 103                 if (ret < 0)
 104                         rte_panic("rte_eth_tx_queue_setup:err=%d, port=%u\n",
 105                                   ret, port_id);
 106                 /* >8 End of init one TX queue on each port. */
 107
 108                 rte_eth_promiscuous_enable(port_id);
 109
 110                 printf("Port %u,MAC address: " RTE_ETHER_ADDR_PRT_FMT "\n\n",
 111                         port_id,
 112                         RTE_ETHER_ADDR_BYTES(&rsrc->eth_addr[port_id]));
 113         }
 114
 115         return nb_ports_available;
 116 }