examples/l2fwd-jobstats/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2016 Intel Corporation
   3  */
   4
   5 #include <locale.h>
   6 #include <stdlib.h>
   7 #include <string.h>
   8 #include <stdint.h>
   9 #include <ctype.h>
  10 #include <getopt.h>
  11
  12 #include <rte_common.h>
  13 #include <rte_log.h>
  14 #include <rte_malloc.h>
  15 #include <rte_memory.h>
  16 #include <rte_memcpy.h>
  17 #include <rte_eal.h>
  18 #include <rte_launch.h>
  19 #include <rte_atomic.h>
  20 #include <rte_cycles.h>
  21 #include <rte_prefetch.h>
  22 #include <rte_lcore.h>
  23 #include <rte_per_lcore.h>
  24 #include <rte_branch_prediction.h>
  25 #include <rte_interrupts.h>
  26 #include <rte_debug.h>
  27 #include <rte_ether.h>
  28 #include <rte_ethdev.h>
  29 #include <rte_mempool.h>
  30 #include <rte_mbuf.h>
  31 #include <rte_spinlock.h>
  32
  33 #include <rte_errno.h>
  34 #include <rte_jobstats.h>
  35 #include <rte_timer.h>
  36 #include <rte_alarm.h>
  37 #include <rte_pause.h>
  38
  39 #define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
  40
  41 #define NB_MBUF   8192
  42
  43 #define MAX_PKT_BURST 32
  44 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
  45
  46 /*
  47  * Configurable number of RX/TX ring descriptors
  48  */
  49 #define RTE_TEST_RX_DESC_DEFAULT 1024
  50 #define RTE_TEST_TX_DESC_DEFAULT 1024
  51 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
  52 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
  53
  54 /* ethernet addresses of ports */
  55 static struct rte_ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
  56
  57 /* mask of enabled ports */
  58 static uint32_t l2fwd_enabled_port_mask;
  59
  60 /* list of enabled ports */
  61 static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
  62
  63 #define UPDATE_STEP_UP 1
  64 #define UPDATE_STEP_DOWN 32
  65
  66 static unsigned int l2fwd_rx_queue_per_lcore = 1;
  67
  68 #define MAX_RX_QUEUE_PER_LCORE 16
  69 #define MAX_TX_QUEUE_PER_PORT 16
  70 struct lcore_queue_conf {
  71         unsigned n_rx_port;
  72         unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
  73         uint64_t next_flush_time[RTE_MAX_ETHPORTS];
  74
  75         struct rte_timer rx_timers[MAX_RX_QUEUE_PER_LCORE];
  76         struct rte_jobstats port_fwd_jobs[MAX_RX_QUEUE_PER_LCORE];
  77
  78         struct rte_timer flush_timer;
  79         struct rte_jobstats flush_job;
  80         struct rte_jobstats idle_job;
  81         struct rte_jobstats_context jobs_context;
  82
  83         rte_atomic16_t stats_read_pending;
  84         rte_spinlock_t lock;
  85 } __rte_cache_aligned;
  86 struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
  87
  88 struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
  89
  90 static struct rte_eth_conf port_conf = {
  91         .rxmode = {
  92                 .split_hdr_size = 0,
  93         },
  94         .txmode = {
  95                 .mq_mode = ETH_MQ_TX_NONE,
  96         },
  97 };
  98
  99 struct rte_mempool *l2fwd_pktmbuf_pool = NULL;
 100
 101 /* Per-port statistics struct */
 102 struct l2fwd_port_statistics {
 103         uint64_t tx;
 104         uint64_t rx;
 105         uint64_t dropped;
 106 } __rte_cache_aligned;
 107 struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
 108
 109 /* 1 day max */
 110 #define MAX_TIMER_PERIOD 86400
 111 /* default period is 10 seconds */
 112 static int64_t timer_period = 10;
 113 /* default timer frequency */
 114 static double hz;
 115 /* BURST_TX_DRAIN_US converted to cycles */
 116 uint64_t drain_tsc;
 117 /* Convert cycles to ns */
 118 static inline double
 119 cycles_to_ns(uint64_t cycles)
 120 {
 121         double t = cycles;
 122
 123         t *= (double)NS_PER_S;
 124         t /= hz;
 125         return t;
 126 }
 127
 128 static void
 129 show_lcore_stats(unsigned lcore_id)
 130 {
 131         struct lcore_queue_conf *qconf = &lcore_queue_conf[lcore_id];
 132         struct rte_jobstats_context *ctx = &qconf->jobs_context;
 133         struct rte_jobstats *job;
 134         uint8_t i;
 135
 136         /* LCore statistics. */
 137         uint64_t stats_period, loop_count;
 138         uint64_t exec, exec_min, exec_max;
 139         uint64_t management, management_min, management_max;
 140         uint64_t busy, busy_min, busy_max;
 141
 142         /* Jobs statistics. */
 143         const uint16_t port_cnt = qconf->n_rx_port;
 144         uint64_t jobs_exec_cnt[port_cnt], jobs_period[port_cnt];
 145         uint64_t jobs_exec[port_cnt], jobs_exec_min[port_cnt],
 146                                 jobs_exec_max[port_cnt];
 147
 148         uint64_t flush_exec_cnt, flush_period;
 149         uint64_t flush_exec, flush_exec_min, flush_exec_max;
 150
 151         uint64_t idle_exec_cnt;
 152         uint64_t idle_exec, idle_exec_min, idle_exec_max;
 153         uint64_t collection_time = rte_get_timer_cycles();
 154
 155         /* Ask forwarding thread to give us stats. */
 156         rte_atomic16_set(&qconf->stats_read_pending, 1);
 157         rte_spinlock_lock(&qconf->lock);
 158         rte_atomic16_set(&qconf->stats_read_pending, 0);
 159
 160         /* Collect context statistics. */
 161         stats_period = ctx->state_time - ctx->start_time;
 162         loop_count = ctx->loop_cnt;
 163
 164         exec = ctx->exec_time;
 165         exec_min = ctx->min_exec_time;
 166         exec_max = ctx->max_exec_time;
 167
 168         management = ctx->management_time;
 169         management_min = ctx->min_management_time;
 170         management_max = ctx->max_management_time;
 171
 172         rte_jobstats_context_reset(ctx);
 173
 174         for (i = 0; i < port_cnt; i++) {
 175                 job = &qconf->port_fwd_jobs[i];
 176
 177                 jobs_exec_cnt[i] = job->exec_cnt;
 178                 jobs_period[i] = job->period;
 179
 180                 jobs_exec[i] = job->exec_time;
 181                 jobs_exec_min[i] = job->min_exec_time;
 182                 jobs_exec_max[i] = job->max_exec_time;
 183
 184                 rte_jobstats_reset(job);
 185         }
 186
 187         flush_exec_cnt = qconf->flush_job.exec_cnt;
 188         flush_period = qconf->flush_job.period;
 189         flush_exec = qconf->flush_job.exec_time;
 190         flush_exec_min = qconf->flush_job.min_exec_time;
 191         flush_exec_max = qconf->flush_job.max_exec_time;
 192         rte_jobstats_reset(&qconf->flush_job);
 193
 194         idle_exec_cnt = qconf->idle_job.exec_cnt;
 195         idle_exec = qconf->idle_job.exec_time;
 196         idle_exec_min = qconf->idle_job.min_exec_time;
 197         idle_exec_max = qconf->idle_job.max_exec_time;
 198         rte_jobstats_reset(&qconf->idle_job);
 199
 200         rte_spinlock_unlock(&qconf->lock);
 201
 202         exec -= idle_exec;
 203         busy = exec + management;
 204         busy_min = exec_min + management_min;
 205         busy_max = exec_max + management_max;
 206
 207
 208         collection_time = rte_get_timer_cycles() - collection_time;
 209
 210 #define STAT_FMT "\n%-18s %'14.0f %6.1f%% %'10.0f %'10.0f %'10.0f"
 211
 212         printf("\n----------------"
 213                         "\nLCore %3u: statistics (time in ns, collected in %'9.0f)"
 214                         "\n%-18s %14s %7s %10s %10s %10s "
 215                         "\n%-18s %'14.0f"
 216                         "\n%-18s %'14" PRIu64
 217                         STAT_FMT /* Exec */
 218                         STAT_FMT /* Management */
 219                         STAT_FMT /* Busy */
 220                         STAT_FMT, /* Idle  */
 221                         lcore_id, cycles_to_ns(collection_time),
 222                         "Stat type", "total", "%total", "avg", "min", "max",
 223                         "Stats duration:", cycles_to_ns(stats_period),
 224                         "Loop count:", loop_count,
 225                         "Exec time",
 226                         cycles_to_ns(exec), exec * 100.0 / stats_period,
 227                         cycles_to_ns(loop_count  ? exec / loop_count : 0),
 228                         cycles_to_ns(exec_min),
 229                         cycles_to_ns(exec_max),
 230                         "Management time",
 231                         cycles_to_ns(management), management * 100.0 / stats_period,
 232                         cycles_to_ns(loop_count  ? management / loop_count : 0),
 233                         cycles_to_ns(management_min),
 234                         cycles_to_ns(management_max),
 235                         "Exec + management",
 236                         cycles_to_ns(busy),  busy * 100.0 / stats_period,
 237                         cycles_to_ns(loop_count ? busy / loop_count : 0),
 238                         cycles_to_ns(busy_min),
 239                         cycles_to_ns(busy_max),
 240                         "Idle (job)",
 241                         cycles_to_ns(idle_exec), idle_exec * 100.0 / stats_period,
 242                         cycles_to_ns(idle_exec_cnt ? idle_exec / idle_exec_cnt : 0),
 243                         cycles_to_ns(idle_exec_min),
 244                         cycles_to_ns(idle_exec_max));
 245
 246         for (i = 0; i < qconf->n_rx_port; i++) {
 247                 job = &qconf->port_fwd_jobs[i];
 248                 printf("\n\nJob %" PRIu32 ": %-20s "
 249                                 "\n%-18s %'14" PRIu64
 250                                 "\n%-18s %'14.0f"
 251                                 STAT_FMT,
 252                                 i, job->name,
 253                                 "Exec count:", jobs_exec_cnt[i],
 254                                 "Exec period: ", cycles_to_ns(jobs_period[i]),
 255                                 "Exec time",
 256                                 cycles_to_ns(jobs_exec[i]), jobs_exec[i] * 100.0 / stats_period,
 257                                 cycles_to_ns(jobs_exec_cnt[i] ? jobs_exec[i] / jobs_exec_cnt[i]
 258                                                 : 0),
 259                                 cycles_to_ns(jobs_exec_min[i]),
 260                                 cycles_to_ns(jobs_exec_max[i]));
 261         }
 262
 263         if (qconf->n_rx_port > 0) {
 264                 job = &qconf->flush_job;
 265                 printf("\n\nJob %" PRIu32 ": %-20s "
 266                                 "\n%-18s %'14" PRIu64
 267                                 "\n%-18s %'14.0f"
 268                                 STAT_FMT,
 269                                 i, job->name,
 270                                 "Exec count:", flush_exec_cnt,
 271                                 "Exec period: ", cycles_to_ns(flush_period),
 272                                 "Exec time",
 273                                 cycles_to_ns(flush_exec), flush_exec * 100.0 / stats_period,
 274                                 cycles_to_ns(flush_exec_cnt ? flush_exec / flush_exec_cnt : 0),
 275                                 cycles_to_ns(flush_exec_min),
 276                                 cycles_to_ns(flush_exec_max));
 277         }
 278 }
 279
 280 /* Print out statistics on packets dropped */
 281 static void
 282 show_stats_cb(__rte_unused void *param)
 283 {
 284         uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
 285         unsigned portid, lcore_id;
 286
 287         total_packets_dropped = 0;
 288         total_packets_tx = 0;
 289         total_packets_rx = 0;
 290
 291         const char clr[] = { 27, '[', '2', 'J', '\0' };
 292         const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
 293
 294         /* Clear screen and move to top left */
 295         printf("%s%s"
 296                         "\nPort statistics ===================================",
 297                         clr, topLeft);
 298
 299         for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
 300                 /* skip disabled ports */
 301                 if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
 302                         continue;
 303                 printf("\nStatistics for port %u ------------------------------"
 304                                 "\nPackets sent: %24"PRIu64
 305                                 "\nPackets received: %20"PRIu64
 306                                 "\nPackets dropped: %21"PRIu64,
 307                                 portid,
 308                                 port_statistics[portid].tx,
 309                                 port_statistics[portid].rx,
 310                                 port_statistics[portid].dropped);
 311
 312                 total_packets_dropped += port_statistics[portid].dropped;
 313                 total_packets_tx += port_statistics[portid].tx;
 314                 total_packets_rx += port_statistics[portid].rx;
 315         }
 316
 317         printf("\nAggregate statistics ==============================="
 318                         "\nTotal packets sent: %18"PRIu64
 319                         "\nTotal packets received: %14"PRIu64
 320                         "\nTotal packets dropped: %15"PRIu64
 321                         "\n====================================================",
 322                         total_packets_tx,
 323                         total_packets_rx,
 324                         total_packets_dropped);
 325
 326         RTE_LCORE_FOREACH(lcore_id) {
 327                 if (lcore_queue_conf[lcore_id].n_rx_port > 0)
 328                         show_lcore_stats(lcore_id);
 329         }
 330
 331         printf("\n====================================================\n");
 332         rte_eal_alarm_set(timer_period * US_PER_S, show_stats_cb, NULL);
 333 }
 334
 335 static void
 336 l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
 337 {
 338         struct rte_ether_hdr *eth;
 339         void *tmp;
 340         int sent;
 341         unsigned dst_port;
 342         struct rte_eth_dev_tx_buffer *buffer;
 343
 344         dst_port = l2fwd_dst_ports[portid];
 345         eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
 346
 347         /* 02:00:00:00:00:xx */
 348         tmp = &eth->d_addr.addr_bytes[0];
 349         *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
 350
 351         /* src addr */
 352         ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], &eth->s_addr);
 353
 354         buffer = tx_buffer[dst_port];
 355         sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
 356         if (sent)
 357                 port_statistics[dst_port].tx += sent;
 358 }
 359
 360 static void
 361 l2fwd_job_update_cb(struct rte_jobstats *job, int64_t result)
 362 {
 363         int64_t err = job->target - result;
 364         int64_t histeresis = job->target / 8;
 365
 366         if (err < -histeresis) {
 367                 if (job->min_period + UPDATE_STEP_DOWN < job->period)
 368                         job->period -= UPDATE_STEP_DOWN;
 369         } else if (err > histeresis) {
 370                 if (job->period + UPDATE_STEP_UP < job->max_period)
 371                         job->period += UPDATE_STEP_UP;
 372         }
 373 }
 374
 375 static void
 376 l2fwd_fwd_job(__rte_unused struct rte_timer *timer, void *arg)
 377 {
 378         struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
 379         struct rte_mbuf *m;
 380
 381         const uint16_t port_idx = (uintptr_t) arg;
 382         const unsigned lcore_id = rte_lcore_id();
 383         struct lcore_queue_conf *qconf = &lcore_queue_conf[lcore_id];
 384         struct rte_jobstats *job = &qconf->port_fwd_jobs[port_idx];
 385         const uint16_t portid = qconf->rx_port_list[port_idx];
 386
 387         uint8_t j;
 388         uint16_t total_nb_rx;
 389
 390         rte_jobstats_start(&qconf->jobs_context, job);
 391
 392         /* Call rx burst 2 times. This allow rte_jobstats logic to see if this
 393          * function must be called more frequently. */
 394
 395         total_nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
 396                         MAX_PKT_BURST);
 397
 398         for (j = 0; j < total_nb_rx; j++) {
 399                 m = pkts_burst[j];
 400                 rte_prefetch0(rte_pktmbuf_mtod(m, void *));
 401                 l2fwd_simple_forward(m, portid);
 402         }
 403
 404         if (total_nb_rx == MAX_PKT_BURST) {
 405                 const uint16_t nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
 406                                 MAX_PKT_BURST);
 407
 408                 total_nb_rx += nb_rx;
 409                 for (j = 0; j < nb_rx; j++) {
 410                         m = pkts_burst[j];
 411                         rte_prefetch0(rte_pktmbuf_mtod(m, void *));
 412                         l2fwd_simple_forward(m, portid);
 413                 }
 414         }
 415
 416         port_statistics[portid].rx += total_nb_rx;
 417
 418         /* Adjust period time in which we are running here. */
 419         if (rte_jobstats_finish(job, total_nb_rx) != 0) {
 420                 rte_timer_reset(&qconf->rx_timers[port_idx], job->period, PERIODICAL,
 421                                 lcore_id, l2fwd_fwd_job, arg);
 422         }
 423 }
 424
 425 static void
 426 l2fwd_flush_job(__rte_unused struct rte_timer *timer, __rte_unused void *arg)
 427 {
 428         uint64_t now;
 429         unsigned lcore_id;
 430         struct lcore_queue_conf *qconf;
 431         uint16_t portid;
 432         unsigned i;
 433         uint32_t sent;
 434         struct rte_eth_dev_tx_buffer *buffer;
 435
 436         lcore_id = rte_lcore_id();
 437         qconf = &lcore_queue_conf[lcore_id];
 438
 439         rte_jobstats_start(&qconf->jobs_context, &qconf->flush_job);
 440
 441         now = rte_get_timer_cycles();
 442         lcore_id = rte_lcore_id();
 443         qconf = &lcore_queue_conf[lcore_id];
 444
 445         for (i = 0; i < qconf->n_rx_port; i++) {
 446                 portid = l2fwd_dst_ports[qconf->rx_port_list[i]];
 447
 448                 if (qconf->next_flush_time[portid] <= now)
 449                         continue;
 450
 451                 buffer = tx_buffer[portid];
 452                 sent = rte_eth_tx_buffer_flush(portid, 0, buffer);
 453                 if (sent)
 454                         port_statistics[portid].tx += sent;
 455
 456                 qconf->next_flush_time[portid] = rte_get_timer_cycles() + drain_tsc;
 457         }
 458
 459         /* Pass target to indicate that this job is happy of time interwal
 460          * in which it was called. */
 461         rte_jobstats_finish(&qconf->flush_job, qconf->flush_job.target);
 462 }
 463
 464 /* main processing loop */
 465 static void
 466 l2fwd_main_loop(void)
 467 {
 468         unsigned lcore_id;
 469         unsigned i, portid;
 470         struct lcore_queue_conf *qconf;
 471         uint8_t stats_read_pending = 0;
 472         uint8_t need_manage;
 473
 474         lcore_id = rte_lcore_id();
 475         qconf = &lcore_queue_conf[lcore_id];
 476
 477         if (qconf->n_rx_port == 0) {
 478                 RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
 479                 return;
 480         }
 481
 482         RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
 483
 484         for (i = 0; i < qconf->n_rx_port; i++) {
 485
 486                 portid = qconf->rx_port_list[i];
 487                 RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
 488                         portid);
 489         }
 490
 491         rte_jobstats_init(&qconf->idle_job, "idle", 0, 0, 0, 0);
 492
 493         for (;;) {
 494                 rte_spinlock_lock(&qconf->lock);
 495
 496                 do {
 497                         rte_jobstats_context_start(&qconf->jobs_context);
 498
 499                         /* Do the Idle job:
 500                          * - Read stats_read_pending flag
 501                          * - check if some real job need to be executed
 502                          */
 503                         rte_jobstats_start(&qconf->jobs_context, &qconf->idle_job);
 504
 505                         uint64_t repeats = 0;
 506
 507                         do {
 508                                 uint8_t i;
 509                                 uint64_t now = rte_get_timer_cycles();
 510
 511                                 repeats++;
 512                                 need_manage = qconf->flush_timer.expire < now;
 513                                 /* Check if we was esked to give a stats. */
 514                                 stats_read_pending =
 515                                                 rte_atomic16_read(&qconf->stats_read_pending);
 516                                 need_manage |= stats_read_pending;
 517
 518                                 for (i = 0; i < qconf->n_rx_port && !need_manage; i++)
 519                                         need_manage = qconf->rx_timers[i].expire < now;
 520
 521                         } while (!need_manage);
 522
 523                         if (likely(repeats != 1))
 524                                 rte_jobstats_finish(&qconf->idle_job, qconf->idle_job.target);
 525                         else
 526                                 rte_jobstats_abort(&qconf->idle_job);
 527
 528                         rte_timer_manage();
 529                         rte_jobstats_context_finish(&qconf->jobs_context);
 530                 } while (likely(stats_read_pending == 0));
 531
 532                 rte_spinlock_unlock(&qconf->lock);
 533                 rte_pause();
 534         }
 535 }
 536
 537 static int
 538 l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
 539 {
 540         l2fwd_main_loop();
 541         return 0;
 542 }
 543
 544 /* display usage */
 545 static void
 546 l2fwd_usage(const char *prgname)
 547 {
 548         printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
 549                "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
 550                "  -q NQ: number of queue (=ports) per lcore (default is 1)\n"
 551                    "  -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
 552                    "  -l set system default locale instead of default (\"C\" locale) for thousands separator in stats.",
 553                prgname);
 554 }
 555
 556 static int
 557 l2fwd_parse_portmask(const char *portmask)
 558 {
 559         char *end = NULL;
 560         unsigned long pm;
 561
 562         /* parse hexadecimal string */
 563         pm = strtoul(portmask, &end, 16);
 564         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 565                 return -1;
 566
 567         if (pm == 0)
 568                 return -1;
 569
 570         return pm;
 571 }
 572
 573 static unsigned int
 574 l2fwd_parse_nqueue(const char *q_arg)
 575 {
 576         char *end = NULL;
 577         unsigned long n;
 578
 579         /* parse hexadecimal string */
 580         n = strtoul(q_arg, &end, 10);
 581         if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
 582                 return 0;
 583         if (n == 0)
 584                 return 0;
 585         if (n >= MAX_RX_QUEUE_PER_LCORE)
 586                 return 0;
 587
 588         return n;
 589 }
 590
 591 static int
 592 l2fwd_parse_timer_period(const char *q_arg)
 593 {
 594         char *end = NULL;
 595         int n;
 596
 597         /* parse number string */
 598         n = strtol(q_arg, &end, 10);
 599         if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
 600                 return -1;
 601         if (n >= MAX_TIMER_PERIOD)
 602                 return -1;
 603
 604         return n;
 605 }
 606
 607 /* Parse the argument given in the command line of the application */
 608 static int
 609 l2fwd_parse_args(int argc, char **argv)
 610 {
 611         int opt, ret;
 612         char **argvopt;
 613         int option_index;
 614         char *prgname = argv[0];
 615         static struct option lgopts[] = {
 616                 {NULL, 0, 0, 0}
 617         };
 618
 619         argvopt = argv;
 620
 621         while ((opt = getopt_long(argc, argvopt, "p:q:T:l",
 622                                   lgopts, &option_index)) != EOF) {
 623
 624                 switch (opt) {
 625                 /* portmask */
 626                 case 'p':
 627                         l2fwd_enabled_port_mask = l2fwd_parse_portmask(optarg);
 628                         if (l2fwd_enabled_port_mask == 0) {
 629                                 printf("invalid portmask\n");
 630                                 l2fwd_usage(prgname);
 631                                 return -1;
 632                         }
 633                         break;
 634
 635                 /* nqueue */
 636                 case 'q':
 637                         l2fwd_rx_queue_per_lcore = l2fwd_parse_nqueue(optarg);
 638                         if (l2fwd_rx_queue_per_lcore == 0) {
 639                                 printf("invalid queue number\n");
 640                                 l2fwd_usage(prgname);
 641                                 return -1;
 642                         }
 643                         break;
 644
 645                 /* timer period */
 646                 case 'T':
 647                         timer_period = l2fwd_parse_timer_period(optarg);
 648                         if (timer_period < 0) {
 649                                 printf("invalid timer period\n");
 650                                 l2fwd_usage(prgname);
 651                                 return -1;
 652                         }
 653                         break;
 654
 655                 /* For thousands separator in printf. */
 656                 case 'l':
 657                         setlocale(LC_ALL, "");
 658                         break;
 659
 660                 /* long options */
 661                 case 0:
 662                         l2fwd_usage(prgname);
 663                         return -1;
 664
 665                 default:
 666                         l2fwd_usage(prgname);
 667                         return -1;
 668                 }
 669         }
 670
 671         if (optind >= 0)
 672                 argv[optind-1] = prgname;
 673
 674         ret = optind-1;
 675         optind = 1; /* reset getopt lib */
 676         return ret;
 677 }
 678
 679 /* Check the link status of all ports in up to 9s, and print them finally */
 680 static void
 681 check_all_ports_link_status(uint32_t port_mask)
 682 {
 683 #define CHECK_INTERVAL 100 /* 100ms */
 684 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
 685         uint16_t portid;
 686         uint8_t count, all_ports_up, print_flag = 0;
 687         struct rte_eth_link link;
 688
 689         printf("\nChecking link status");
 690         fflush(stdout);
 691         for (count = 0; count <= MAX_CHECK_TIME; count++) {
 692                 all_ports_up = 1;
 693                 RTE_ETH_FOREACH_DEV(portid) {
 694                         if ((port_mask & (1 << portid)) == 0)
 695                                 continue;
 696                         memset(&link, 0, sizeof(link));
 697                         rte_eth_link_get_nowait(portid, &link);
 698                         /* print link status if flag set */
 699                         if (print_flag == 1) {
 700                                 if (link.link_status)
 701                                         printf(
 702                                         "Port%d Link Up. Speed %u Mbps - %s\n",
 703                                                 portid, link.link_speed,
 704                                 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
 705                                         ("full-duplex") : ("half-duplex\n"));
 706                                 else
 707                                         printf("Port %d Link Down\n", portid);
 708                                 continue;
 709                         }
 710                         /* clear all_ports_up flag if any link down */
 711                         if (link.link_status == ETH_LINK_DOWN) {
 712                                 all_ports_up = 0;
 713                                 break;
 714                         }
 715                 }
 716                 /* after finally printing all link status, get out */
 717                 if (print_flag == 1)
 718                         break;
 719
 720                 if (all_ports_up == 0) {
 721                         printf(".");
 722                         fflush(stdout);
 723                         rte_delay_ms(CHECK_INTERVAL);
 724                 }
 725
 726                 /* set the print_flag if all ports up or timeout */
 727                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
 728                         print_flag = 1;
 729                         printf("done\n");
 730                 }
 731         }
 732 }
 733
 734 int
 735 main(int argc, char **argv)
 736 {
 737         struct lcore_queue_conf *qconf;
 738         unsigned lcore_id, rx_lcore_id;
 739         unsigned nb_ports_in_mask = 0;
 740         int ret;
 741         char name[RTE_JOBSTATS_NAMESIZE];
 742         uint16_t nb_ports;
 743         uint16_t nb_ports_available = 0;
 744         uint16_t portid, last_port;
 745         uint8_t i;
 746
 747         /* init EAL */
 748         ret = rte_eal_init(argc, argv);
 749         if (ret < 0)
 750                 rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
 751         argc -= ret;
 752         argv += ret;
 753
 754         /* parse application arguments (after the EAL ones) */
 755         ret = l2fwd_parse_args(argc, argv);
 756         if (ret < 0)
 757                 rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
 758
 759         rte_timer_subsystem_init();
 760
 761         /* fetch default timer frequency. */
 762         hz = rte_get_timer_hz();
 763
 764         /* create the mbuf pool */
 765         l2fwd_pktmbuf_pool =
 766                 rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
 767                         0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
 768         if (l2fwd_pktmbuf_pool == NULL)
 769                 rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
 770
 771         nb_ports = rte_eth_dev_count_avail();
 772         if (nb_ports == 0)
 773                 rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
 774
 775         /* reset l2fwd_dst_ports */
 776         for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
 777                 l2fwd_dst_ports[portid] = 0;
 778         last_port = 0;
 779
 780         /*
 781          * Each logical core is assigned a dedicated TX queue on each port.
 782          */
 783         RTE_ETH_FOREACH_DEV(portid) {
 784                 /* skip ports that are not enabled */
 785                 if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
 786                         continue;
 787
 788                 if (nb_ports_in_mask % 2) {
 789                         l2fwd_dst_ports[portid] = last_port;
 790                         l2fwd_dst_ports[last_port] = portid;
 791                 } else
 792                         last_port = portid;
 793
 794                 nb_ports_in_mask++;
 795         }
 796         if (nb_ports_in_mask % 2) {
 797                 printf("Notice: odd number of ports in portmask.\n");
 798                 l2fwd_dst_ports[last_port] = last_port;
 799         }
 800
 801         rx_lcore_id = 0;
 802         qconf = NULL;
 803
 804         /* Initialize the port/queue configuration of each logical core */
 805         RTE_ETH_FOREACH_DEV(portid) {
 806                 /* skip ports that are not enabled */
 807                 if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
 808                         continue;
 809
 810                 /* get the lcore_id for this port */
 811                 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
 812                        lcore_queue_conf[rx_lcore_id].n_rx_port ==
 813                        l2fwd_rx_queue_per_lcore) {
 814                         rx_lcore_id++;
 815                         if (rx_lcore_id >= RTE_MAX_LCORE)
 816                                 rte_exit(EXIT_FAILURE, "Not enough cores\n");
 817                 }
 818
 819                 if (qconf != &lcore_queue_conf[rx_lcore_id])
 820                         /* Assigned a new logical core in the loop above. */
 821                         qconf = &lcore_queue_conf[rx_lcore_id];
 822
 823                 qconf->rx_port_list[qconf->n_rx_port] = portid;
 824                 qconf->n_rx_port++;
 825                 printf("Lcore %u: RX port %u\n", rx_lcore_id, portid);
 826         }
 827
 828         /* Initialise each port */
 829         RTE_ETH_FOREACH_DEV(portid) {
 830                 struct rte_eth_dev_info dev_info;
 831                 struct rte_eth_rxconf rxq_conf;
 832                 struct rte_eth_txconf txq_conf;
 833                 struct rte_eth_conf local_port_conf = port_conf;
 834
 835                 /* skip ports that are not enabled */
 836                 if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
 837                         printf("Skipping disabled port %u\n", portid);
 838                         continue;
 839                 }
 840                 nb_ports_available++;
 841
 842                 /* init port */
 843                 printf("Initializing port %u... ", portid);
 844                 fflush(stdout);
 845                 rte_eth_dev_info_get(portid, &dev_info);
 846                 if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 847                         local_port_conf.txmode.offloads |=
 848                                 DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 849                 ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
 850                 if (ret < 0)
 851                         rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
 852                                   ret, portid);
 853
 854                 ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
 855                                                        &nb_txd);
 856                 if (ret < 0)
 857                         rte_exit(EXIT_FAILURE,
 858                                  "Cannot adjust number of descriptors: err=%d, port=%u\n",
 859                                  ret, portid);
 860
 861                 rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
 862
 863                 /* init one RX queue */
 864                 fflush(stdout);
 865                 rxq_conf = dev_info.default_rxconf;
 866                 rxq_conf.offloads = local_port_conf.rxmode.offloads;
 867                 ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
 868                                              rte_eth_dev_socket_id(portid),
 869                                              &rxq_conf,
 870                                              l2fwd_pktmbuf_pool);
 871                 if (ret < 0)
 872                         rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
 873                                   ret, portid);
 874
 875                 /* init one TX queue on each port */
 876                 txq_conf = dev_info.default_txconf;
 877                 txq_conf.offloads = local_port_conf.txmode.offloads;
 878                 fflush(stdout);
 879                 ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
 880                                 rte_eth_dev_socket_id(portid),
 881                                 &txq_conf);
 882                 if (ret < 0)
 883                         rte_exit(EXIT_FAILURE,
 884                         "rte_eth_tx_queue_setup:err=%d, port=%u\n",
 885                                 ret, portid);
 886
 887                 /* Initialize TX buffers */
 888                 tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
 889                                 RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
 890                                 rte_eth_dev_socket_id(portid));
 891                 if (tx_buffer[portid] == NULL)
 892                         rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
 893                                         portid);
 894
 895                 rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
 896
 897                 ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
 898                                 rte_eth_tx_buffer_count_callback,
 899                                 &port_statistics[portid].dropped);
 900                 if (ret < 0)
 901                         rte_exit(EXIT_FAILURE,
 902                         "Cannot set error callback for tx buffer on port %u\n",
 903                                  portid);
 904
 905                 /* Start device */
 906                 ret = rte_eth_dev_start(portid);
 907                 if (ret < 0)
 908                         rte_exit(EXIT_FAILURE, "rte_eth_dev_start:err=%d, port=%u\n",
 909                                   ret, portid);
 910
 911                 printf("done:\n");
 912
 913                 rte_eth_promiscuous_enable(portid);
 914
 915                 printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
 916                                 portid,
 917                                 l2fwd_ports_eth_addr[portid].addr_bytes[0],
 918                                 l2fwd_ports_eth_addr[portid].addr_bytes[1],
 919                                 l2fwd_ports_eth_addr[portid].addr_bytes[2],
 920                                 l2fwd_ports_eth_addr[portid].addr_bytes[3],
 921                                 l2fwd_ports_eth_addr[portid].addr_bytes[4],
 922                                 l2fwd_ports_eth_addr[portid].addr_bytes[5]);
 923
 924                 /* initialize port stats */
 925                 memset(&port_statistics, 0, sizeof(port_statistics));
 926         }
 927
 928         if (!nb_ports_available) {
 929                 rte_exit(EXIT_FAILURE,
 930                         "All available ports are disabled. Please set portmask.\n");
 931         }
 932
 933         check_all_ports_link_status(l2fwd_enabled_port_mask);
 934
 935         drain_tsc = (hz + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
 936
 937         RTE_LCORE_FOREACH(lcore_id) {
 938                 qconf = &lcore_queue_conf[lcore_id];
 939
 940                 rte_spinlock_init(&qconf->lock);
 941
 942                 if (rte_jobstats_context_init(&qconf->jobs_context) != 0)
 943                         rte_panic("Jobs stats context for core %u init failed\n", lcore_id);
 944
 945                 if (qconf->n_rx_port == 0) {
 946                         RTE_LOG(INFO, L2FWD,
 947                                 "lcore %u: no ports so no jobs stats context initialization\n",
 948                                 lcore_id);
 949                         continue;
 950                 }
 951                 /* Add flush job.
 952                  * Set fixed period by setting min = max = initial period. Set target to
 953                  * zero as it is irrelevant for this job. */
 954                 rte_jobstats_init(&qconf->flush_job, "flush", drain_tsc, drain_tsc,
 955                                 drain_tsc, 0);
 956
 957                 rte_timer_init(&qconf->flush_timer);
 958                 ret = rte_timer_reset(&qconf->flush_timer, drain_tsc, PERIODICAL,
 959                                 lcore_id, &l2fwd_flush_job, NULL);
 960
 961                 if (ret < 0) {
 962                         rte_exit(1, "Failed to reset flush job timer for lcore %u: %s",
 963                                         lcore_id, rte_strerror(-ret));
 964                 }
 965
 966                 for (i = 0; i < qconf->n_rx_port; i++) {
 967                         struct rte_jobstats *job = &qconf->port_fwd_jobs[i];
 968
 969                         portid = qconf->rx_port_list[i];
 970                         printf("Setting forward job for port %u\n", portid);
 971
 972                         snprintf(name, RTE_DIM(name), "port %u fwd", portid);
 973                         /* Setup forward job.
 974                          * Set min, max and initial period. Set target to MAX_PKT_BURST as
 975                          * this is desired optimal RX/TX burst size. */
 976                         rte_jobstats_init(job, name, 0, drain_tsc, 0, MAX_PKT_BURST);
 977                         rte_jobstats_set_update_period_function(job, l2fwd_job_update_cb);
 978
 979                         rte_timer_init(&qconf->rx_timers[i]);
 980                         ret = rte_timer_reset(&qconf->rx_timers[i], 0, PERIODICAL, lcore_id,
 981                                         &l2fwd_fwd_job, (void *)(uintptr_t)i);
 982
 983                         if (ret < 0) {
 984                                 rte_exit(1, "Failed to reset lcore %u port %u job timer: %s",
 985                                                 lcore_id, qconf->rx_port_list[i], rte_strerror(-ret));
 986                         }
 987                 }
 988         }
 989
 990         if (timer_period)
 991                 rte_eal_alarm_set(timer_period * MS_PER_S, show_stats_cb, NULL);
 992         else
 993                 RTE_LOG(INFO, L2FWD, "Stats display disabled\n");
 994
 995         /* launch per-lcore init on every lcore */
 996         rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, CALL_MASTER);
 997         RTE_LCORE_FOREACH_SLAVE(lcore_id) {
 998                 if (rte_eal_wait_lcore(lcore_id) < 0)
 999                         return -1;
1000         }
1001
1002         return 0;
1003 }