16970711b03ef43fd77eab58b972ecd37a5b6755
[dpdk.git] / lib / librte_net / rte_net.h
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright 2016 6WIND S.A.
3  */
4
5 #ifndef _RTE_NET_PTYPE_H_
6 #define _RTE_NET_PTYPE_H_
7
8 #ifdef __cplusplus
9 extern "C" {
10 #endif
11
12 #include <rte_ip.h>
13 #include <rte_udp.h>
14 #include <rte_tcp.h>
15 #include <rte_sctp.h>
16
17 /**
18  * Structure containing header lengths associated to a packet, filled
19  * by rte_net_get_ptype().
20  */
21 struct rte_net_hdr_lens {
22         uint8_t l2_len;
23         uint8_t l3_len;
24         uint8_t l4_len;
25         uint8_t tunnel_len;
26         uint8_t inner_l2_len;
27         uint8_t inner_l3_len;
28         uint8_t inner_l4_len;
29 };
30
31 /**
32  * Skip IPv6 header extensions.
33  *
34  * This function skips all IPv6 extensions, returning size of
35  * complete header including options and final protocol value.
36  *
37  * @warning
38  * @b EXPERIMENTAL: this API may change without prior notice
39  *
40  * @param proto
41  *   Protocol field of IPv6 header.
42  * @param m
43  *   The packet mbuf to be parsed.
44  * @param off
45  *   On input, must contain the offset to the first byte following
46  *   IPv6 header, on output, contains offset to the first byte
47  *   of next layer (after any IPv6 extension header)
48  * @param frag
49  *   Contains 1 in output if packet is an IPv6 fragment.
50  * @return
51  *   Protocol that follows IPv6 header.
52  *   -1 if an error occurs during mbuf parsing.
53  */
54 int __rte_experimental
55 rte_net_skip_ip6_ext(uint16_t proto, const struct rte_mbuf *m, uint32_t *off,
56         int *frag);
57
58 /**
59  * Parse an Ethernet packet to get its packet type.
60  *
61  * This function parses the network headers in mbuf data and return its
62  * packet type.
63  *
64  * If it is provided by the user, it also fills a rte_net_hdr_lens
65  * structure that contains the lengths of the parsed network
66  * headers. Each length field is valid only if the associated packet
67  * type is set. For instance, hdr_lens->l2_len is valid only if
68  * (retval & RTE_PTYPE_L2_MASK) != RTE_PTYPE_UNKNOWN.
69  *
70  * Supported packet types are:
71  *   L2: Ether, Vlan, QinQ
72  *   L3: IPv4, IPv6
73  *   L4: TCP, UDP, SCTP
74  *   Tunnels: IPv4, IPv6, Gre, Nvgre
75  *
76  * @param m
77  *   The packet mbuf to be parsed.
78  * @param hdr_lens
79  *   A pointer to a structure where the header lengths will be returned,
80  *   or NULL.
81  * @param layers
82  *   List of layers to parse. The function will stop at the first
83  *   empty layer. Examples:
84  *   - To parse all known layers, use RTE_PTYPE_ALL_MASK.
85  *   - To parse only L2 and L3, use RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK
86  * @return
87  *   The packet type of the packet.
88  */
89 uint32_t rte_net_get_ptype(const struct rte_mbuf *m,
90         struct rte_net_hdr_lens *hdr_lens, uint32_t layers);
91
92 /**
93  * Prepare pseudo header checksum
94  *
95  * This function prepares pseudo header checksum for TSO and non-TSO tcp/udp in
96  * provided mbufs packet data and based on the requested offload flags.
97  *
98  * - for non-TSO tcp/udp packets full pseudo-header checksum is counted and set
99  *   in packet data,
100  * - for TSO the IP payload length is not included in pseudo header.
101  *
102  * This function expects that used headers are in the first data segment of
103  * mbuf, are not fragmented and can be safely modified.
104  *
105  * @param m
106  *   The packet mbuf to be fixed.
107  * @param ol_flags
108  *   TX offloads flags to use with this packet.
109  * @return
110  *   0 if checksum is initialized properly
111  */
112 static inline int
113 rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
114 {
115         struct ipv4_hdr *ipv4_hdr;
116         struct ipv6_hdr *ipv6_hdr;
117         struct tcp_hdr *tcp_hdr;
118         struct udp_hdr *udp_hdr;
119         uint64_t inner_l3_offset = m->l2_len;
120
121 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
122         /*
123          * Does packet set any of available offloads?
124          * Mainly it is required to avoid fragmented headers check if
125          * no offloads are requested.
126          */
127         if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
128                 return 0;
129 #endif
130
131         if ((ol_flags & PKT_TX_OUTER_IP_CKSUM) ||
132                 (ol_flags & PKT_TX_OUTER_IPV6))
133                 inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
134
135 #ifdef RTE_LIBRTE_ETHDEV_DEBUG
136         /*
137          * Check if headers are fragmented.
138          * The check could be less strict depending on which offloads are
139          * requested and headers to be used, but let's keep it simple.
140          */
141         if (unlikely(rte_pktmbuf_data_len(m) <
142                      inner_l3_offset + m->l3_len + m->l4_len))
143                 return -ENOTSUP;
144 #endif
145
146         if (ol_flags & PKT_TX_IPV4) {
147                 ipv4_hdr = rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *,
148                                 inner_l3_offset);
149
150                 if (ol_flags & PKT_TX_IP_CKSUM)
151                         ipv4_hdr->hdr_checksum = 0;
152         }
153
154         if ((ol_flags & PKT_TX_UDP_CKSUM) == PKT_TX_UDP_CKSUM) {
155                 if (ol_flags & PKT_TX_IPV4) {
156                         udp_hdr = (struct udp_hdr *)((char *)ipv4_hdr +
157                                         m->l3_len);
158                         udp_hdr->dgram_cksum = rte_ipv4_phdr_cksum(ipv4_hdr,
159                                         ol_flags);
160                 } else {
161                         ipv6_hdr = rte_pktmbuf_mtod_offset(m, struct ipv6_hdr *,
162                                         inner_l3_offset);
163                         /* non-TSO udp */
164                         udp_hdr = rte_pktmbuf_mtod_offset(m, struct udp_hdr *,
165                                         inner_l3_offset + m->l3_len);
166                         udp_hdr->dgram_cksum = rte_ipv6_phdr_cksum(ipv6_hdr,
167                                         ol_flags);
168                 }
169         } else if ((ol_flags & PKT_TX_TCP_CKSUM) ||
170                         (ol_flags & PKT_TX_TCP_SEG)) {
171                 if (ol_flags & PKT_TX_IPV4) {
172                         /* non-TSO tcp or TSO */
173                         tcp_hdr = (struct tcp_hdr *)((char *)ipv4_hdr +
174                                         m->l3_len);
175                         tcp_hdr->cksum = rte_ipv4_phdr_cksum(ipv4_hdr,
176                                         ol_flags);
177                 } else {
178                         ipv6_hdr = rte_pktmbuf_mtod_offset(m, struct ipv6_hdr *,
179                                         inner_l3_offset);
180                         /* non-TSO tcp or TSO */
181                         tcp_hdr = rte_pktmbuf_mtod_offset(m, struct tcp_hdr *,
182                                         inner_l3_offset + m->l3_len);
183                         tcp_hdr->cksum = rte_ipv6_phdr_cksum(ipv6_hdr,
184                                         ol_flags);
185                 }
186         }
187
188         return 0;
189 }
190
191 /**
192  * Prepare pseudo header checksum
193  *
194  * This function prepares pseudo header checksum for TSO and non-TSO tcp/udp in
195  * provided mbufs packet data.
196  *
197  * - for non-TSO tcp/udp packets full pseudo-header checksum is counted and set
198  *   in packet data,
199  * - for TSO the IP payload length is not included in pseudo header.
200  *
201  * This function expects that used headers are in the first data segment of
202  * mbuf, are not fragmented and can be safely modified.
203  *
204  * @param m
205  *   The packet mbuf to be fixed.
206  * @return
207  *   0 if checksum is initialized properly
208  */
209 static inline int
210 rte_net_intel_cksum_prepare(struct rte_mbuf *m)
211 {
212         return rte_net_intel_cksum_flags_prepare(m, m->ol_flags);
213 }
214
215 #ifdef __cplusplus
216 }
217 #endif
218
219
220 #endif /* _RTE_NET_PTYPE_H_ */