crypto/aesni_mb: support Chacha20-Poly1305
authorPablo de Lara <pablo.de.lara.guarch@intel.com>
Fri, 9 Oct 2020 12:05:21 +0000 (12:05 +0000)
committerAkhil Goyal <akhil.goyal@nxp.com>
Wed, 14 Oct 2020 20:22:06 +0000 (22:22 +0200)
Add support for Chacha20-Poly1305 AEAD algorithm.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
doc/guides/cryptodevs/aesni_mb.rst
doc/guides/cryptodevs/features/aesni_mb.ini
doc/guides/rel_notes/release_20_11.rst
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c

index abc10fb..2ff2649 100644 (file)
@@ -63,6 +63,7 @@ AEAD algorithms:
 
 * RTE_CRYPTO_AEAD_AES_CCM
 * RTE_CRYPTO_AEAD_AES_GCM
+* RTE_CRYPTO_AEAD_CHACHA20_POLY1305
 
 Protocol offloads:
 
index 6113e90..78d2dbd 100644 (file)
@@ -64,11 +64,11 @@ KASUMI F9    = Y
 ; Supported AEAD algorithms of the 'aesni_mb' crypto driver.
 ;
 [AEAD]
-AES CCM (128) = Y
-AES GCM (128) = Y
-AES GCM (192) = Y
-AES GCM (256) = Y
-
+AES CCM (128)     = Y
+AES GCM (128)     = Y
+AES GCM (192)     = Y
+AES GCM (256)     = Y
+CHACHA20-POLY1305 = Y
 ;
 ; Supported Asymmetric algorithms of the 'aesni_mb' crypto driver.
 ;
index 80217a0..097b255 100644 (file)
@@ -158,6 +158,7 @@ New Features
   * Added support for ZUC-EEA3/EIA3 algorithms.
   * Added support for SNOW3G-UEA2/UIA2 algorithms.
   * Added support for KASUMI-F8/F9 algorithms.
+  * Added support for Chacha20-Poly1305.
 
 * **Updated the aesni_gcm crypto PMD.**
 
index 7dbe40e..42c2320 100644 (file)
@@ -125,6 +125,18 @@ aesni_mb_get_chain_order(const struct rte_crypto_sym_xform *xform)
        return AESNI_MB_OP_NOT_SUPPORTED;
 }
 
+static inline int
+is_aead_algo(JOB_HASH_ALG hash_alg, JOB_CIPHER_MODE cipher_mode)
+{
+#if IMB_VERSION(0, 54, 3) <= IMB_VERSION_NUM
+       return (hash_alg == IMB_AUTH_CHACHA20_POLY1305 || hash_alg == AES_CCM ||
+               (hash_alg == AES_GMAC && cipher_mode == GCM));
+#else
+       return ((hash_alg == AES_GMAC && cipher_mode == GCM) ||
+               hash_alg == AES_CCM);
+#endif
+}
+
 /** Set session authentication parameters */
 static int
 aesni_mb_set_session_auth_parameters(const MB_MGR *mb_mgr,
@@ -721,6 +733,24 @@ aesni_mb_set_session_aead_parameters(const MB_MGR *mb_mgr,
                }
                break;
 
+#if IMB_VERSION(0, 54, 3) <= IMB_VERSION_NUM
+       case RTE_CRYPTO_AEAD_CHACHA20_POLY1305:
+               sess->cipher.mode = IMB_CIPHER_CHACHA20_POLY1305;
+               sess->auth.algo = IMB_AUTH_CHACHA20_POLY1305;
+
+               if (xform->aead.key.length != 32) {
+                       AESNI_MB_LOG(ERR, "Invalid key length");
+                       return -EINVAL;
+               }
+               sess->cipher.key_length_in_bytes = 32;
+               memcpy(sess->cipher.expanded_aes_keys.encode,
+                       xform->aead.key.data, 32);
+               if (sess->auth.req_digest_len != 16) {
+                       AESNI_MB_LOG(ERR, "Invalid digest size\n");
+                       return -EINVAL;
+               }
+               break;
+#endif
        default:
                AESNI_MB_LOG(ERR, "Unsupported aead mode parameter");
                return -ENOTSUP;
@@ -1220,6 +1250,8 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
        /* Set authentication parameters */
        job->hash_alg = session->auth.algo;
 
+       const int aead = is_aead_algo(job->hash_alg, job->cipher_mode);
+
        switch (job->hash_alg) {
        case AES_XCBC:
                job->u.XCBC._k1_expanded = session->auth.xcbc.k1_expanded;
@@ -1279,6 +1311,14 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
        case IMB_AUTH_KASUMI_UIA1:
                job->u.KASUMI_UIA1._key = (void *) &session->auth.pKeySched_kasumi_auth;
                break;
+#endif
+#if IMB_VERSION(0, 54, 3) <= IMB_VERSION_NUM
+       case IMB_AUTH_CHACHA20_POLY1305:
+               job->u.CHACHA20_POLY1305.aad = op->sym->aead.aad.data;
+               job->u.CHACHA20_POLY1305.aad_len_in_bytes = session->aead.aad_len;
+               job->aes_enc_key_expanded = session->cipher.expanded_aes_keys.encode;
+               job->aes_dec_key_expanded = session->cipher.expanded_aes_keys.encode;
+               break;
 #endif
        default:
                job->u.HMAC._hashed_auth_key_xor_ipad = session->auth.pads.inner;
@@ -1297,8 +1337,7 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
                }
        }
 
-       if (job->hash_alg == AES_CCM || (job->hash_alg == AES_GMAC &&
-                       session->cipher.mode == GCM))
+       if (aead)
                m_offset = op->sym->aead.data.offset;
        else
                m_offset = op->sym->cipher.data.offset;
@@ -1336,8 +1375,7 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
                job->auth_tag_output = qp->temp_digests[*digest_idx];
                *digest_idx = (*digest_idx + 1) % MAX_JOBS;
        } else {
-               if (job->hash_alg == AES_CCM || (job->hash_alg == AES_GMAC &&
-                               session->cipher.mode == GCM))
+               if (aead)
                        job->auth_tag_output = op->sym->aead.digest.data;
                else
                        job->auth_tag_output = op->sym->auth.digest.data;
@@ -1397,6 +1435,19 @@ set_mb_job_params(JOB_AES_HMAC *job, struct aesni_mb_qp *qp,
                                session->iv.offset);
                break;
 
+#if IMB_VERSION(0, 54, 3) <= IMB_VERSION_NUM
+       case IMB_AUTH_CHACHA20_POLY1305:
+               job->cipher_start_src_offset_in_bytes = op->sym->aead.data.offset;
+               job->hash_start_src_offset_in_bytes = op->sym->aead.data.offset;
+               job->msg_len_to_cipher_in_bytes =
+                               op->sym->aead.data.length;
+               job->msg_len_to_hash_in_bytes =
+                                       op->sym->aead.data.length;
+
+               job->iv = rte_crypto_op_ctod_offset(op, uint8_t *,
+                               session->iv.offset);
+               break;
+#endif
        default:
                /* For SNOW3G, length and offsets are already in bits */
                job->cipher_start_src_offset_in_bytes =
@@ -1595,9 +1646,7 @@ post_process_mb_job(struct aesni_mb_qp *qp, JOB_AES_HMAC *job)
                                break;
 
                        if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
-                               if (job->hash_alg == AES_CCM ||
-                                       (job->hash_alg == AES_GMAC &&
-                                               sess->cipher.mode == GCM))
+                               if (is_aead_algo(job->hash_alg, sess->cipher.mode))
                                        verify_digest(job,
                                                op->sym->aead.digest.data,
                                                sess->auth.req_digest_len,
index 46b8517..81d3332 100644 (file)
@@ -647,6 +647,38 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = {
                        }, }
                }, }
        },
+#endif
+#if IMB_VERSION(0, 54, 3) <= IMB_VERSION_NUM
+       {       /* CHACHA20-POLY1305 */
+               .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+               {.sym = {
+                       .xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
+                       {.aead = {
+                               .algo = RTE_CRYPTO_AEAD_CHACHA20_POLY1305,
+                               .block_size = 64,
+                               .key_size = {
+                                       .min = 32,
+                                       .max = 32,
+                                       .increment = 0
+                               },
+                               .digest_size = {
+                                       .min = 16,
+                                       .max = 16,
+                                       .increment = 0
+                               },
+                               .aad_size = {
+                                       .min = 0,
+                                       .max = 240,
+                                       .increment = 1
+                               },
+                               .iv_size = {
+                                       .min = 12,
+                                       .max = 12,
+                                       .increment = 0
+                               },
+                       }, }
+               }, }
+       },
 #endif
        RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };