--- /dev/null
+.. BSD LICENSE
+ Copyright(c) 2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Tun/Tap Poll Mode Driver
+========================
+
+The ``rte_eth_tap.c`` PMD creates a device using TUN/TAP interfaces on the
+local host. The PMD allows for DPDK and the host to communicate using a raw
+device interface on the host and in the DPDK application.
+
+The device created is a TAP device, which sends/receives packet in a raw
+format with a L2 header. The usage for a TAP PMD is for connectivity to the
+local host using a TAP interface. When the TAP PMD is initialized it will
+create a number of tap devices in the host accessed via ``ifconfig -a`` or
+``ip`` command. The commands can be used to assign and query the virtual like
+device.
+
+These TAP interfaces can be used with Wireshark or tcpdump or Pktgen-DPDK
+along with being able to be used as a network connection to the DPDK
+application. The method enable one or more interfaces is to use the
+``--vdev=net_tap`` option on the DPDK application command line. Each
+``--vdev=net_tap`` option give will create an interface named dtap0, dtap1,
+and so on.
+
+The interfaced name can be changed by adding the ``iface=foo0``, for example::
+
+ --vdev=net_tap,iface=foo0 --vdev=net_tap,iface=foo1, ...
+
+Also the speed of the interface can be changed from 10G to whatever number
+needed, but the interface does not enforce that speed, for example::
+
+ --vdev=net_tap,iface=foo0,speed=25000
+
+After the DPDK application is started you can send and receive packets on the
+interface using the standard rx_burst/tx_burst APIs in DPDK. From the host
+point of view you can use any host tool like tcpdump, Wireshark, ping, Pktgen
+and others to communicate with the DPDK application. The DPDK application may
+not understand network protocols like IPv4/6, UDP or TCP unless the
+application has been written to understand these protocols.
+
+If you need the interface as a real network interface meaning running and has
+a valid IP address then you can do this with the following commands::
+
+ sudo ip link set dtap0 up; sudo ip addr add 192.168.0.250/24 dev dtap0
+ sudo ip link set dtap1 up; sudo ip addr add 192.168.1.250/24 dev dtap1
+
+Please change the IP addresses as you see fit.
+
+If routing is enabled on the host you can also communicate with the DPDK App
+over the internet via a standard socket layer application as long as you
+account for the protocol handing in the application.
+
+If you have a Network Stack in your DPDK application or something like it you
+can utilize that stack to handle the network protocols. Plus you would be able
+to address the interface using an IP address assigned to the internal
+interface.
+
+Example
+-------
+
+The following is a simple example of using the TUN/TAP PMD with the Pktgen
+packet generator. It requires that the ``socat`` utility is installed on the
+test system.
+
+Build DPDK, then pull down Pktgen and build pktgen using the DPDK SDK/Target
+used to build the dpdk you pulled down.
+
+Run pktgen from the pktgen directory in a terminal with a commandline like the
+following::
+
+ sudo ./app/app/x86_64-native-linuxapp-gcc/app/pktgen -l 1-5 -n 4 \
+ --proc-type auto --log-level 8 --socket-mem 512,512 --file-prefix pg \
+ --vdev=net_tap --vdev=net_tap -b 05:00.0 -b 05:00.1 \
+ -b 04:00.0 -b 04:00.1 -b 04:00.2 -b 04:00.3 \
+ -b 81:00.0 -b 81:00.1 -b 81:00.2 -b 81:00.3 \
+ -b 82:00.0 -b 83:00.0 -- -T -P -m [2:3].0 -m [4:5].1 \
+ -f themes/black-yellow.theme
+
+.. Note:
+
+ Change the ``-b`` options to blacklist all of your physical ports. The
+ following command line is all one line.
+
+ Also, ``-f themes/black-yellow.theme`` is optional if the default colors
+ work on your system configuration. See the Pktgen docs for more
+ information.
+
+Verify with ``ifconfig -a`` command in a different xterm window, should have a
+``dtap0`` and ``dtap1`` interfaces created.
+
+Next set the links for the two interfaces to up via the commands below::
+
+ sudo ip link set dtap0 up; sudo ip addr add 192.168.0.250/24 dev dtap0
+ sudo ip link set dtap1 up; sudo ip addr add 192.168.1.250/24 dev dtap1
+
+Then use socat to create a loopback for the two interfaces::
+
+ sudo socat interface:dtap0 interface:dtap1
+
+Then on the Pktgen command line interface you can start sending packets using
+the commands ``start 0`` and ``start 1`` or you can start both at the same
+time with ``start all``. The command ``str`` is an alias for ``start all`` and
+``stp`` is an alias for ``stop all``.
+
+While running you should see the 64 byte counters increasing to verify the
+traffic is being looped back. You can use ``set all size XXX`` to change the
+size of the packets after you stop the traffic. Use the pktgen ``help``
+command to see a list of all commands. You can also use the ``-f`` option to
+load commands at startup.
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_vdev.h>
+#include <rte_kvargs.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <poll.h>
+#include <arpa/inet.h>
+#include <linux/if.h>
+#include <linux/if_tun.h>
+#include <linux/if_ether.h>
+#include <fcntl.h>
+
+/* Linux based path to the TUN device */
+#define TUN_TAP_DEV_PATH "/dev/net/tun"
+#define DEFAULT_TAP_NAME "dtap"
+
+#define ETH_TAP_IFACE_ARG "iface"
+#define ETH_TAP_SPEED_ARG "speed"
+
+#define RTE_PMD_TAP_MAX_QUEUES 16
+
+static struct rte_vdev_driver pmd_tap_drv;
+
+static const char *valid_arguments[] = {
+ ETH_TAP_IFACE_ARG,
+ ETH_TAP_SPEED_ARG,
+ NULL
+};
+
+static int tap_unit;
+
+static struct rte_eth_link pmd_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_DOWN,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG
+};
+
+struct pkt_stats {
+ uint64_t opackets; /* Number of output packets */
+ uint64_t ipackets; /* Number of input packets */
+ uint64_t obytes; /* Number of bytes on output */
+ uint64_t ibytes; /* Number of bytes on input */
+ uint64_t errs; /* Number of error packets */
+};
+
+struct rx_queue {
+ struct rte_mempool *mp; /* Mempool for RX packets */
+ uint16_t in_port; /* Port ID */
+ int fd;
+
+ struct pkt_stats stats; /* Stats for this RX queue */
+};
+
+struct tx_queue {
+ int fd;
+ struct pkt_stats stats; /* Stats for this TX queue */
+};
+
+struct pmd_internals {
+ char name[RTE_ETH_NAME_MAX_LEN]; /* Internal Tap device name */
+ uint16_t nb_queues; /* Number of queues supported */
+ struct ether_addr eth_addr; /* Mac address of the device port */
+
+ int if_index; /* IF_INDEX for the port */
+ int fds[RTE_PMD_TAP_MAX_QUEUES]; /* List of all file descriptors */
+
+ struct rx_queue rxq[RTE_PMD_TAP_MAX_QUEUES]; /* List of RX queues */
+ struct tx_queue txq[RTE_PMD_TAP_MAX_QUEUES]; /* List of TX queues */
+};
+
+/* Tun/Tap allocation routine
+ *
+ * name is the number of the interface to use, unless NULL to take the host
+ * supplied name.
+ */
+static int
+tun_alloc(char *name)
+{
+ struct ifreq ifr;
+ unsigned int features;
+ int fd;
+
+ memset(&ifr, 0, sizeof(struct ifreq));
+
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+ if (name && name[0])
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+
+ fd = open(TUN_TAP_DEV_PATH, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, PMD, "Unable to create TAP interface");
+ goto error;
+ }
+
+ /* Grab the TUN features to verify we can work */
+ if (ioctl(fd, TUNGETFEATURES, &features) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to get TUN/TAP features\n");
+ goto error;
+ }
+ RTE_LOG(DEBUG, PMD, "TUN/TAP Features %08x\n", features);
+
+ if (!(features & IFF_MULTI_QUEUE) && (RTE_PMD_TAP_MAX_QUEUES > 1)) {
+ RTE_LOG(DEBUG, PMD, "TUN/TAP device only one queue\n");
+ goto error;
+ } else if ((features & IFF_ONE_QUEUE) &&
+ (RTE_PMD_TAP_MAX_QUEUES == 1)) {
+ ifr.ifr_flags |= IFF_ONE_QUEUE;
+ RTE_LOG(DEBUG, PMD, "Single queue only support\n");
+ } else {
+ ifr.ifr_flags |= IFF_MULTI_QUEUE;
+ RTE_LOG(DEBUG, PMD, "Multi-queue support for %d queues\n",
+ RTE_PMD_TAP_MAX_QUEUES);
+ }
+
+ /* Set the TUN/TAP configuration and get the name if needed */
+ if (ioctl(fd, TUNSETIFF, (void *)&ifr) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to set TUNSETIFF for %s\n",
+ ifr.ifr_name);
+ perror("TUNSETIFF");
+ goto error;
+ }
+
+ /* Always set the file descriptor to non-blocking */
+ if (fcntl(fd, F_SETFL, O_NONBLOCK) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to set to nonblocking\n");
+ perror("F_SETFL, NONBLOCK");
+ goto error;
+ }
+
+ /* If the name is different that new name as default */
+ if (name && strcmp(name, ifr.ifr_name))
+ snprintf(name, RTE_ETH_NAME_MAX_LEN - 1, "%s", ifr.ifr_name);
+
+ return fd;
+
+error:
+ if (fd > 0)
+ close(fd);
+ return -1;
+}
+
+/* Callback to handle the rx burst of packets to the correct interface and
+ * file descriptor(s) in a multi-queue setup.
+ */
+static uint16_t
+pmd_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
+{
+ int len;
+ struct rte_mbuf *mbuf;
+ struct rx_queue *rxq = queue;
+ uint16_t num_rx;
+ unsigned long num_rx_bytes = 0;
+
+ for (num_rx = 0; num_rx < nb_pkts; ) {
+ /* allocate the next mbuf */
+ mbuf = rte_pktmbuf_alloc(rxq->mp);
+ if (unlikely(!mbuf)) {
+ RTE_LOG(WARNING, PMD, "Unable to allocate mbuf\n");
+ break;
+ }
+
+ len = read(rxq->fd, rte_pktmbuf_mtod(mbuf, char *),
+ rte_pktmbuf_tailroom(mbuf));
+ if (len <= 0) {
+ rte_pktmbuf_free(mbuf);
+ break;
+ }
+
+ mbuf->data_len = len;
+ mbuf->pkt_len = len;
+ mbuf->port = rxq->in_port;
+
+ /* account for the receive frame */
+ bufs[num_rx++] = mbuf;
+ num_rx_bytes += mbuf->pkt_len;
+ }
+ rxq->stats.ipackets += num_rx;
+ rxq->stats.ibytes += num_rx_bytes;
+
+ return num_rx;
+}
+
+/* Callback to handle sending packets from the tap interface
+ */
+static uint16_t
+pmd_tx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
+{
+ struct rte_mbuf *mbuf;
+ struct tx_queue *txq = queue;
+ struct pollfd pfd;
+ uint16_t num_tx = 0;
+ unsigned long num_tx_bytes = 0;
+ int i, n;
+
+ if (unlikely(nb_pkts == 0))
+ return 0;
+
+ pfd.events = POLLOUT;
+ pfd.fd = txq->fd;
+ for (i = 0; i < nb_pkts; i++) {
+ n = poll(&pfd, 1, 0);
+
+ if (n <= 0)
+ break;
+
+ if (pfd.revents & POLLOUT) {
+ /* copy the tx frame data */
+ mbuf = bufs[num_tx];
+ n = write(pfd.fd, rte_pktmbuf_mtod(mbuf, void*),
+ rte_pktmbuf_pkt_len(mbuf));
+ if (n <= 0)
+ break;
+
+ num_tx++;
+ num_tx_bytes += mbuf->pkt_len;
+ rte_pktmbuf_free(mbuf);
+ }
+ }
+
+ txq->stats.opackets += num_tx;
+ txq->stats.errs += nb_pkts - num_tx;
+ txq->stats.obytes += num_tx_bytes;
+
+ return num_tx;
+}
+
+static int
+tap_dev_start(struct rte_eth_dev *dev)
+{
+ /* Force the Link up */
+ dev->data->dev_link.link_status = ETH_LINK_UP;
+
+ return 0;
+}
+
+/* This function gets called when the current port gets stopped.
+ */
+static void
+tap_dev_stop(struct rte_eth_dev *dev)
+{
+ int i;
+ struct pmd_internals *internals = dev->data->dev_private;
+
+ for (i = 0; i < internals->nb_queues; i++)
+ if (internals->fds[i] != -1)
+ close(internals->fds[i]);
+
+ dev->data->dev_link.link_status = ETH_LINK_DOWN;
+}
+
+static int
+tap_dev_configure(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+static void
+tap_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+
+ dev_info->if_index = internals->if_index;
+ dev_info->max_mac_addrs = 1;
+ dev_info->max_rx_pktlen = (uint32_t)ETHER_MAX_VLAN_FRAME_LEN;
+ dev_info->max_rx_queues = internals->nb_queues;
+ dev_info->max_tx_queues = internals->nb_queues;
+ dev_info->min_rx_bufsize = 0;
+ dev_info->pci_dev = NULL;
+}
+
+static void
+tap_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *tap_stats)
+{
+ unsigned int i, imax;
+ unsigned long rx_total = 0, tx_total = 0, tx_err_total = 0;
+ unsigned long rx_bytes_total = 0, tx_bytes_total = 0;
+ const struct pmd_internals *pmd = dev->data->dev_private;
+
+ imax = (pmd->nb_queues < RTE_ETHDEV_QUEUE_STAT_CNTRS) ?
+ pmd->nb_queues : RTE_ETHDEV_QUEUE_STAT_CNTRS;
+
+ for (i = 0; i < imax; i++) {
+ tap_stats->q_ipackets[i] = pmd->rxq[i].stats.ipackets;
+ tap_stats->q_ibytes[i] = pmd->rxq[i].stats.ibytes;
+ rx_total += tap_stats->q_ipackets[i];
+ rx_bytes_total += tap_stats->q_ibytes[i];
+ }
+
+ for (i = 0; i < imax; i++) {
+ tap_stats->q_opackets[i] = pmd->txq[i].stats.opackets;
+ tap_stats->q_errors[i] = pmd->txq[i].stats.errs;
+ tap_stats->q_obytes[i] = pmd->txq[i].stats.obytes;
+ tx_total += tap_stats->q_opackets[i];
+ tx_err_total += tap_stats->q_errors[i];
+ tx_bytes_total += tap_stats->q_obytes[i];
+ }
+
+ tap_stats->ipackets = rx_total;
+ tap_stats->ibytes = rx_bytes_total;
+ tap_stats->opackets = tx_total;
+ tap_stats->oerrors = tx_err_total;
+ tap_stats->obytes = tx_bytes_total;
+}
+
+static void
+tap_stats_reset(struct rte_eth_dev *dev)
+{
+ int i;
+ struct pmd_internals *pmd = dev->data->dev_private;
+
+ for (i = 0; i < pmd->nb_queues; i++) {
+ pmd->rxq[i].stats.ipackets = 0;
+ pmd->rxq[i].stats.ibytes = 0;
+ }
+
+ for (i = 0; i < pmd->nb_queues; i++) {
+ pmd->txq[i].stats.opackets = 0;
+ pmd->txq[i].stats.errs = 0;
+ pmd->txq[i].stats.obytes = 0;
+ }
+}
+
+static void
+tap_dev_close(struct rte_eth_dev *dev __rte_unused)
+{
+}
+
+static void
+tap_rx_queue_release(void *queue)
+{
+ struct rx_queue *rxq = queue;
+
+ if (rxq && (rxq->fd > 0)) {
+ close(rxq->fd);
+ rxq->fd = -1;
+ }
+}
+
+static void
+tap_tx_queue_release(void *queue)
+{
+ struct tx_queue *txq = queue;
+
+ if (txq && (txq->fd > 0)) {
+ close(txq->fd);
+ txq->fd = -1;
+ }
+}
+
+static int
+tap_link_update(struct rte_eth_dev *dev __rte_unused,
+ int wait_to_complete __rte_unused)
+{
+ return 0;
+}
+
+static int
+tap_setup_queue(struct rte_eth_dev *dev,
+ struct pmd_internals *internals,
+ uint16_t qid)
+{
+ struct rx_queue *rx = &internals->rxq[qid];
+ struct tx_queue *tx = &internals->txq[qid];
+ int fd;
+
+ fd = rx->fd;
+ if (fd < 0) {
+ fd = tx->fd;
+ if (fd < 0) {
+ RTE_LOG(INFO, PMD, "Add queue to TAP %s for qid %d\n",
+ dev->data->name, qid);
+ fd = tun_alloc(dev->data->name);
+ if (fd < 0) {
+ RTE_LOG(ERR, PMD, "tun_alloc(%s) failed\n",
+ dev->data->name);
+ return -1;
+ }
+ }
+ }
+ dev->data->rx_queues[qid] = rx;
+ dev->data->tx_queues[qid] = tx;
+
+ rx->fd = fd;
+ tx->fd = fd;
+
+ return fd;
+}
+
+static int
+tap_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_rxconf *rx_conf __rte_unused,
+ struct rte_mempool *mp)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ uint16_t buf_size;
+ int fd;
+
+ if ((rx_queue_id >= internals->nb_queues) || !mp) {
+ RTE_LOG(ERR, PMD, "nb_queues %d mp %p\n",
+ internals->nb_queues, mp);
+ return -1;
+ }
+
+ internals->rxq[rx_queue_id].mp = mp;
+ internals->rxq[rx_queue_id].in_port = dev->data->port_id;
+
+ /* Now get the space available for data in the mbuf */
+ buf_size = (uint16_t)(rte_pktmbuf_data_room_size(mp) -
+ RTE_PKTMBUF_HEADROOM);
+
+ if (buf_size < ETH_FRAME_LEN) {
+ RTE_LOG(ERR, PMD,
+ "%s: %d bytes will not fit in mbuf (%d bytes)\n",
+ dev->data->name, ETH_FRAME_LEN, buf_size);
+ return -ENOMEM;
+ }
+
+ fd = tap_setup_queue(dev, internals, rx_queue_id);
+ if (fd == -1)
+ return -1;
+
+ internals->fds[rx_queue_id] = fd;
+ RTE_LOG(INFO, PMD, "RX TAP device name %s, qid %d on fd %d\n",
+ dev->data->name, rx_queue_id, internals->rxq[rx_queue_id].fd);
+
+ return 0;
+}
+
+static int
+tap_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_txconf *tx_conf __rte_unused)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ int ret;
+
+ if (tx_queue_id >= internals->nb_queues)
+ return -1;
+
+ ret = tap_setup_queue(dev, internals, tx_queue_id);
+ if (ret == -1)
+ return -1;
+
+ RTE_LOG(INFO, PMD, "TX TAP device name %s, qid %d on fd %d\n",
+ dev->data->name, tx_queue_id, internals->txq[tx_queue_id].fd);
+
+ return 0;
+}
+
+static const struct eth_dev_ops ops = {
+ .dev_start = tap_dev_start,
+ .dev_stop = tap_dev_stop,
+ .dev_close = tap_dev_close,
+ .dev_configure = tap_dev_configure,
+ .dev_infos_get = tap_dev_info,
+ .rx_queue_setup = tap_rx_queue_setup,
+ .tx_queue_setup = tap_tx_queue_setup,
+ .rx_queue_release = tap_rx_queue_release,
+ .tx_queue_release = tap_tx_queue_release,
+ .link_update = tap_link_update,
+ .stats_get = tap_stats_get,
+ .stats_reset = tap_stats_reset,
+};
+
+static int
+pmd_mac_address(int fd, struct rte_eth_dev *dev, struct ether_addr *addr)
+{
+ struct ifreq ifr;
+
+ if ((fd <= 0) || !dev || !addr)
+ return -1;
+
+ memset(&ifr, 0, sizeof(ifr));
+
+ if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
+ RTE_LOG(ERR, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
+ ifr.ifr_name);
+ return -1;
+ }
+
+ /* Set the host based MAC address to this special MAC format */
+ ifr.ifr_hwaddr.sa_data[0] = 'T';
+ ifr.ifr_hwaddr.sa_data[1] = 'a';
+ ifr.ifr_hwaddr.sa_data[2] = 'p';
+ ifr.ifr_hwaddr.sa_data[3] = '-';
+ ifr.ifr_hwaddr.sa_data[4] = dev->data->port_id;
+ ifr.ifr_hwaddr.sa_data[5] = dev->data->numa_node;
+ if (ioctl(fd, SIOCSIFHWADDR, &ifr) == -1) {
+ RTE_LOG(ERR, PMD, "%s: ioctl failed (SIOCSIFHWADDR) (%s)\n",
+ dev->data->name, ifr.ifr_name);
+ return -1;
+ }
+
+ /* Set the local application MAC address, needs to be different then
+ * the host based MAC address.
+ */
+ ifr.ifr_hwaddr.sa_data[0] = 'd';
+ ifr.ifr_hwaddr.sa_data[1] = 'n';
+ ifr.ifr_hwaddr.sa_data[2] = 'e';
+ ifr.ifr_hwaddr.sa_data[3] = 't';
+ ifr.ifr_hwaddr.sa_data[4] = dev->data->port_id;
+ ifr.ifr_hwaddr.sa_data[5] = dev->data->numa_node;
+ rte_memcpy(addr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
+
+ return 0;
+}
+
+static int
+eth_dev_tap_create(const char *name, char *tap_name)
+{
+ int numa_node = rte_socket_id();
+ struct rte_eth_dev *dev = NULL;
+ struct pmd_internals *pmd = NULL;
+ struct rte_eth_dev_data *data = NULL;
+ int i, fd = -1;
+
+ RTE_LOG(INFO, PMD,
+ "%s: Create TAP Ethernet device with %d queues on numa %u\n",
+ name, RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
+
+ data = rte_zmalloc_socket(tap_name, sizeof(*data), 0, numa_node);
+ if (!data) {
+ RTE_LOG(INFO, PMD, "Failed to allocate data\n");
+ goto error_exit;
+ }
+
+ pmd = rte_zmalloc_socket(tap_name, sizeof(*pmd), 0, numa_node);
+ if (!pmd) {
+ RTE_LOG(INFO, PMD, "Unable to allocate internal struct\n");
+ goto error_exit;
+ }
+
+ /* Use the name and not the tap_name */
+ dev = rte_eth_dev_allocate(tap_name);
+ if (!dev) {
+ RTE_LOG(INFO, PMD, "Unable to allocate device struct\n");
+ goto error_exit;
+ }
+
+ snprintf(pmd->name, sizeof(pmd->name), "%s", tap_name);
+
+ pmd->nb_queues = RTE_PMD_TAP_MAX_QUEUES;
+
+ /* Setup some default values */
+ data->dev_private = pmd;
+ data->port_id = dev->data->port_id;
+ data->dev_flags = RTE_ETH_DEV_DETACHABLE;
+ data->kdrv = RTE_KDRV_NONE;
+ data->drv_name = pmd_tap_drv.driver.name;
+ data->numa_node = numa_node;
+
+ data->dev_link = pmd_link;
+ data->mac_addrs = &pmd->eth_addr;
+ data->nb_rx_queues = pmd->nb_queues;
+ data->nb_tx_queues = pmd->nb_queues;
+
+ dev->data = data;
+ dev->dev_ops = &ops;
+ dev->driver = NULL;
+ dev->rx_pkt_burst = pmd_rx_burst;
+ dev->tx_pkt_burst = pmd_tx_burst;
+ snprintf(dev->data->name, sizeof(dev->data->name), "%s", name);
+
+ /* Create the first Tap device */
+ fd = tun_alloc(tap_name);
+ if (fd < 0) {
+ RTE_LOG(INFO, PMD, "tun_alloc() failed\n");
+ goto error_exit;
+ }
+
+ /* Presetup the fds to -1 as being not working */
+ for (i = 0; i < RTE_PMD_TAP_MAX_QUEUES; i++) {
+ pmd->fds[i] = -1;
+ pmd->rxq[i].fd = -1;
+ pmd->txq[i].fd = -1;
+ }
+
+ /* Take the TUN/TAP fd and place in the first location */
+ pmd->rxq[0].fd = fd;
+ pmd->txq[0].fd = fd;
+ pmd->fds[0] = fd;
+
+ if (pmd_mac_address(fd, dev, &pmd->eth_addr) < 0) {
+ RTE_LOG(INFO, PMD, "Unable to get MAC address\n");
+ goto error_exit;
+ }
+
+ return 0;
+
+error_exit:
+ RTE_PMD_DEBUG_TRACE("Unable to initialize %s\n", name);
+
+ rte_free(data);
+ rte_free(pmd);
+
+ rte_eth_dev_release_port(dev);
+
+ return -EINVAL;
+}
+
+static int
+set_interface_name(const char *key __rte_unused,
+ const char *value,
+ void *extra_args)
+{
+ char *name = (char *)extra_args;
+
+ if (value)
+ snprintf(name, RTE_ETH_NAME_MAX_LEN - 1, "%s", value);
+ else
+ snprintf(name, RTE_ETH_NAME_MAX_LEN - 1, "%s%d",
+ DEFAULT_TAP_NAME, (tap_unit - 1));
+
+ return 0;
+}
+
+static int
+set_interface_speed(const char *key __rte_unused,
+ const char *value,
+ void *extra_args)
+{
+ *(int *)extra_args = (value) ? atoi(value) : ETH_SPEED_NUM_10G;
+
+ return 0;
+}
+
+/* Open a TAP interface device.
+ */
+static int
+rte_pmd_tap_probe(const char *name, const char *params)
+{
+ int ret;
+ struct rte_kvargs *kvlist = NULL;
+ int speed;
+ char tap_name[RTE_ETH_NAME_MAX_LEN];
+
+ speed = ETH_SPEED_NUM_10G;
+ snprintf(tap_name, sizeof(tap_name), "%s%d",
+ DEFAULT_TAP_NAME, tap_unit++);
+
+ RTE_LOG(INFO, PMD, "Initializing pmd_tap for %s as %s\n",
+ name, tap_name);
+
+ if (params && (params[0] != '\0')) {
+ RTE_LOG(INFO, PMD, "paramaters (%s)\n", params);
+
+ kvlist = rte_kvargs_parse(params, valid_arguments);
+ if (kvlist) {
+ if (rte_kvargs_count(kvlist, ETH_TAP_SPEED_ARG) == 1) {
+ ret = rte_kvargs_process(kvlist,
+ ETH_TAP_SPEED_ARG,
+ &set_interface_speed,
+ &speed);
+ if (ret == -1)
+ goto leave;
+ }
+
+ if (rte_kvargs_count(kvlist, ETH_TAP_IFACE_ARG) == 1) {
+ ret = rte_kvargs_process(kvlist,
+ ETH_TAP_IFACE_ARG,
+ &set_interface_name,
+ tap_name);
+ if (ret == -1)
+ goto leave;
+ }
+ }
+ }
+ pmd_link.link_speed = speed;
+
+ ret = eth_dev_tap_create(name, tap_name);
+
+leave:
+ if (ret == -1) {
+ RTE_LOG(INFO, PMD, "Failed to create pmd for %s as %s\n",
+ name, tap_name);
+ tap_unit--; /* Restore the unit number */
+ }
+ rte_kvargs_free(kvlist);
+
+ return ret;
+}
+
+/* detach a TAP device.
+ */
+static int
+rte_pmd_tap_remove(const char *name)
+{
+ struct rte_eth_dev *eth_dev = NULL;
+ struct pmd_internals *internals;
+ int i;
+
+ RTE_LOG(INFO, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
+ rte_socket_id());
+
+ /* find the ethdev entry */
+ eth_dev = rte_eth_dev_allocated(name);
+ if (!eth_dev)
+ return 0;
+
+ internals = eth_dev->data->dev_private;
+ for (i = 0; i < internals->nb_queues; i++)
+ if (internals->fds[i] != -1)
+ close(internals->fds[i]);
+
+ rte_free(eth_dev->data->dev_private);
+ rte_free(eth_dev->data);
+
+ rte_eth_dev_release_port(eth_dev);
+
+ return 0;
+}
+
+static struct rte_vdev_driver pmd_tap_drv = {
+ .probe = rte_pmd_tap_probe,
+ .remove = rte_pmd_tap_remove,
+};
+RTE_PMD_REGISTER_VDEV(net_tap, pmd_tap_drv);
+RTE_PMD_REGISTER_ALIAS(net_tap, eth_tap);
+RTE_PMD_REGISTER_PARAM_STRING(net_tap, "iface=<string>,speed=N");
git.droids-corp.org / dpdk.git / commitdiff