net/ixgbe/base: remove X550em SFP iXFI setup

This patch removes X550em SFP iXFI setup for the drivers since there
is no released hardware production with SFP iXFI.

Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index aa6e859..b8fdb00 100644 (file)
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -2460,53 +2460,18 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
        if (ret_val != IXGBE_SUCCESS)
                return ret_val;
 
-       if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
-               /* Configure CS4227 LINE side to 10G SR. */
-               reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB +
-                           (hw->bus.lan_id << 12);
-               reg_val = IXGBE_CS4227_SPEED_10G;
-               ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
-                                                 reg_val);
-
-               reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
-                           (hw->bus.lan_id << 12);
+       /* Configure internal PHY for KR/KX. */
+       ixgbe_setup_kr_speed_x550em(hw, speed);
+
+       /* Configure CS4227 LINE side to proper mode. */
+       reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
+                   (hw->bus.lan_id << 12);
+       if (setup_linear)
+               reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+       else
                reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
-               ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
-                                                 reg_val);
-
-               /* Configure CS4227 for HOST connection rate then type. */
-               reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB +
-                           (hw->bus.lan_id << 12);
-               reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
-               IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
-               ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
-                                                 reg_val);
-
-               reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB +
-                           (hw->bus.lan_id << 12);
-               if (setup_linear)
-                       reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
-               else
-                       reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
-               ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
-                                                 reg_val);
-
-               /* Setup XFI internal link. */
-               ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
-       } else {
-               /* Configure internal PHY for KR/KX. */
-               ixgbe_setup_kr_speed_x550em(hw, speed);
-
-               /* Configure CS4227 LINE side to proper mode. */
-               reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
-                           (hw->bus.lan_id << 12);
-               if (setup_linear)
-                       reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
-               else
-                       reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
-               ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
-                                                 reg_val);
-       }
+       ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+                                         reg_val);
        return ret_val;
 }