M: Remy Horton <remy.horton@intel.com>
F: lib/librte_metrics/
+Bit-rate statistics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_bitratestats/
+
Test Applications
-----------------
#
CONFIG_RTE_LIBRTE_METRICS=y
+#
+# Compile the bitrate statistics library
+#
+CONFIG_RTE_LIBRTE_BITRATE=y
+
#
# Compile librte_lpm
#
[ABI compat] (@ref rte_compat.h),
[keepalive] (@ref rte_keepalive.h),
[device metrics] (@ref rte_metrics.h),
+ [bitrate statistics] (@ref rte_bitrate.h),
[version] (@ref rte_version.h)
lib/librte_eal/common/include \
lib/librte_eal/common/include/generic \
lib/librte_acl \
+ lib/librte_bitratestats \
lib/librte_cfgfile \
lib/librte_cmdline \
lib/librte_compat \
free(metrics);
free(names);
}
+
+
+Bit-rate statistics library
+---------------------------
+
+The bit-rate library calculates the exponentially-weighted moving
+average and peak bit-rates for each active port (i.e. network device).
+These statistics are reported via the metrics library using the
+following names:
+
+ - ``mean_bits_in``: Average inbound bit-rate
+ - ``mean_bits_out``: Average outbound bit-rate
+ - ``ewma_bits_in``: Average inbound bit-rate (EWMA smoothed)
+ - ``ewma_bits_out``: Average outbound bit-rate (EWMA smoothed)
+ - ``peak_bits_in``: Peak inbound bit-rate
+ - ``peak_bits_out``: Peak outbound bit-rate
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_stats_bitrate_create()``, which will return a bit-rate
+calculation object. Since the bit-rate library uses the metrics library
+to report the calculated statistics, the bit-rate library then needs to
+register the calculated statistics with the metrics library. This is
+done using the helper function ``rte_stats_bitrate_reg()``.
+
+.. code-block:: c
+
+ struct rte_stats_bitrates *bitrate_data;
+
+ bitrate_data = rte_stats_bitrate_create();
+ if (bitrate_data == NULL)
+ rte_exit(EXIT_FAILURE, "Could not allocate bit-rate data.\n");
+ rte_stats_bitrate_reg(bitrate_data);
+
+Controlling the sampling rate
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the library works by periodic sampling but does not use an
+internal thread, the application has to periodically call
+``rte_stats_bitrate_calc()``. The frequency at which this function
+is called should be the intended sampling rate required for the
+calculated statistics. For instance if per-second statistics are
+desired, this function should be called once a second.
+
+.. code-block:: c
+
+ tics_datum = rte_rdtsc();
+ tics_per_1sec = rte_get_timer_hz();
+
+ while( 1 ) {
+ /* ... */
+ tics_current = rte_rdtsc();
+ if (tics_current - tics_datum >= tics_per_1sec) {
+ /* Periodic bitrate calculation */
+ for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+ rte_stats_bitrate_calc(bitrate_data, idx_port);
+ tics_datum = tics_current;
+ }
+ /* ... */
+ }
reporting mechanism that is independent of other libraries such
as ethdev.
+* **Added bit-rate calculation library.**
+
+ A library that can be used to calculate device bit-rates. Calculated
+ bitrates are reported using the metrics library.
+
Resolved Issues
---------------
.. code-block:: diff
librte_acl.so.2
+ + librte_bitratestats.so.1
librte_cfgfile.so.2
librte_cmdline.so.2
librte_cryptodev.so.2
DEPDIRS-librte_jobstats := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
DEPDIRS-librte_metrics := librte_eal
+DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
+DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
DEPDIRS-librte_power := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
--- /dev/null
+# BSD LICENSE
+#
+# Copyright(c) 2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_bitratestats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+EXPORT_MAP := rte_bitratestats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) := rte_bitrate.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_BITRATE)-include += rte_bitrate.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_bitrate.h>
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * Persistent bit-rate data.
+ * @internal
+ */
+struct rte_stats_bitrate {
+ uint64_t last_ibytes;
+ uint64_t last_obytes;
+ uint64_t peak_ibits;
+ uint64_t peak_obits;
+ uint64_t mean_ibits;
+ uint64_t mean_obits;
+ uint64_t ewma_ibits;
+ uint64_t ewma_obits;
+};
+
+struct rte_stats_bitrates {
+ struct rte_stats_bitrate port_stats[RTE_MAX_ETHPORTS];
+ uint16_t id_stats_set;
+};
+
+struct rte_stats_bitrates *
+rte_stats_bitrate_create(void)
+{
+ return rte_zmalloc(NULL, sizeof(struct rte_stats_bitrates),
+ RTE_CACHE_LINE_SIZE);
+}
+
+int
+rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data)
+{
+ const char * const names[] = {
+ "ewma_bits_in", "ewma_bits_out",
+ "mean_bits_in", "mean_bits_out",
+ "peak_bits_in", "peak_bits_out",
+ };
+ int return_value;
+
+ return_value = rte_metrics_reg_names(&names[0], ARRAY_SIZE(names));
+ if (return_value >= 0)
+ bitrate_data->id_stats_set = return_value;
+ return return_value;
+}
+
+int
+rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+ uint8_t port_id)
+{
+ struct rte_stats_bitrate *port_data;
+ struct rte_eth_stats eth_stats;
+ int ret_code;
+ uint64_t cnt_bits;
+ int64_t delta;
+ const int64_t alpha_percent = 20;
+ uint64_t values[6];
+
+ ret_code = rte_eth_stats_get(port_id, ð_stats);
+ if (ret_code != 0)
+ return ret_code;
+
+ port_data = &bitrate_data->port_stats[port_id];
+
+ /* Incoming bitrate. This is an iteratively calculated EWMA
+ * (Exponentially Weighted Moving Average) that uses a
+ * weighting factor of alpha_percent. An unsmoothed mean
+ * for just the current time delta is also calculated for the
+ * benefit of people who don't understand signal processing.
+ */
+ cnt_bits = (eth_stats.ibytes - port_data->last_ibytes) << 3;
+ port_data->last_ibytes = eth_stats.ibytes;
+ if (cnt_bits > port_data->peak_ibits)
+ port_data->peak_ibits = cnt_bits;
+ delta = cnt_bits;
+ delta -= port_data->ewma_ibits;
+ /* The +-50 fixes integer rounding during divison */
+ if (delta > 0)
+ delta = (delta * alpha_percent + 50) / 100;
+ else
+ delta = (delta * alpha_percent - 50) / 100;
+ port_data->ewma_ibits += delta;
+ port_data->mean_ibits = cnt_bits;
+
+ /* Outgoing bitrate (also EWMA) */
+ cnt_bits = (eth_stats.obytes - port_data->last_obytes) << 3;
+ port_data->last_obytes = eth_stats.obytes;
+ if (cnt_bits > port_data->peak_obits)
+ port_data->peak_obits = cnt_bits;
+ delta = cnt_bits;
+ delta -= port_data->ewma_obits;
+ if (delta > 0)
+ delta = (delta * alpha_percent + 50) / 100;
+ else
+ delta = (delta * alpha_percent - 50) / 100;
+ port_data->ewma_obits += delta;
+ port_data->mean_obits = cnt_bits;
+
+ values[0] = port_data->ewma_ibits;
+ values[1] = port_data->ewma_obits;
+ values[2] = port_data->mean_ibits;
+ values[3] = port_data->mean_obits;
+ values[4] = port_data->peak_ibits;
+ values[5] = port_data->peak_obits;
+ rte_metrics_update_values(port_id, bitrate_data->id_stats_set,
+ values, ARRAY_SIZE(values));
+ return 0;
+}
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BITRATE_H_
+#define _RTE_BITRATE_H_
+
+/**
+ * Bitrate statistics data structure.
+ * This data structure is intentionally opaque.
+ */
+struct rte_stats_bitrates;
+
+
+/**
+ * Allocate a bitrate statistics structure
+ *
+ * @return
+ * - Pointer to structure on success
+ * - NULL on error (zmalloc failure)
+ */
+struct rte_stats_bitrates *rte_stats_bitrate_create(void);
+
+
+/**
+ * Register bitrate statistics with the metric library.
+ *
+ * @param bitrate_data
+ * Pointer allocated by rte_stats_create()
+ *
+ * @return
+ * Zero on success
+ * Negative on error
+ */
+int rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data);
+
+
+/**
+ * Calculate statistics for current time window. The period with which
+ * this function is called should be the intended sampling window width.
+ *
+ * @param bitrate_data
+ * Bitrate statistics data pointer
+ *
+ * @param port_id
+ * Port id to calculate statistics for
+ *
+ * @return
+ * - Zero on success
+ * - Negative value on error
+ */
+int rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+ uint8_t port_id);
+
+#endif /* _RTE_BITRATE_H_ */
--- /dev/null
+DPDK_17.05 {
+ global:
+
+ rte_stats_bitrate_calc;
+ rte_stats_bitrate_create;
+ rte_stats_bitrate_reg;
+
+ local: *;
+};
_LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --no-whole-archive
_LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats
_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS) += -lrte_metrics
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE) += -lrte_bitratestats
_LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
_LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
git.droids-corp.org / dpdk.git / commitdiff