crypto/dpaa2_sec: support dynamic logging
authorShreyansh Jain <shreyansh.jain@nxp.com>
Mon, 2 Apr 2018 14:06:01 +0000 (19:36 +0530)
committerThomas Monjalon <thomas@monjalon.net>
Mon, 2 Apr 2018 22:05:07 +0000 (00:05 +0200)
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
config/common_base
config/defconfig_arm64-dpaa2-linuxapp-gcc
doc/guides/cryptodevs/dpaa2_sec.rst
drivers/crypto/dpaa2_sec/Makefile
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h

index e709349..348228b 100644 (file)
@@ -452,9 +452,6 @@ CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
 CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
index b3b958b..ecac994 100644 (file)
@@ -27,10 +27,3 @@ CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 #
 CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-
-#
-# Compile NXP DPAA2 crypto sec driver for CAAM HW
-#
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
index 5460a92..5558ea5 100644 (file)
@@ -189,15 +189,6 @@ Please note that enabling debugging options may affect system performance.
   By default it is only enabled in defconfig_arm64-dpaa2-* config.
   Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.
 
-* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``)
-  Toggle display of initialization related driver messages
-
-* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER`` (default ``n``)
-  Toggle display of driver runtime messages
-
-* ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX`` (default ``n``)
-  Toggle display of receive fast path run-time message
-
 * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS``
   By default it is set as 2048 in defconfig_arm64-dpaa2-* config.
   It indicates Number of sessions to create in the session memory pool
@@ -212,3 +203,15 @@ following ``make`` command:
 
    cd <DPDK-source-directory>
    make config T=arm64-dpaa2-linuxapp-gcc install
+
+Enabling logs
+-------------
+
+For enabling logs, use the following EAL parameter:
+
+.. code-block:: console
+
+   ./your_crypto_application <EAL args> --log-level=pmd.crypto.dpaa2,<level>
+
+Using ``crypto.dpaa2`` as log matching criteria, all Crypto PMD logs can be
+enabled which are lower than logging ``level``.
index cb6c63e..da3d8f8 100644 (file)
@@ -18,13 +18,8 @@ LIB = librte_pmd_dpaa2_sec.a
 
 # build flags
 CFLAGS += -DALLOW_EXPERIMENTAL_API
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y)
-CFLAGS += -O0 -g
-CFLAGS += "-Wno-error"
-else
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
-endif
 CFLAGS += -D _GNU_SOURCE
 
 ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
index 0c28b1d..784b96d 100644 (file)
@@ -56,6 +56,8 @@ enum rta_sec_era rta_sec_era = RTA_SEC_ERA_8;
 
 static uint8_t cryptodev_driver_id;
 
+int dpaa2_logtype_sec;
+
 static inline int
 build_proto_fd(dpaa2_sec_session *sess,
               struct rte_crypto_op *op,
@@ -113,7 +115,7 @@ build_authenc_gcm_sg_fd(dpaa2_sec_session *sess,
        fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
                        RTE_CACHE_LINE_SIZE);
        if (unlikely(!fle)) {
-               RTE_LOG(ERR, PMD, "GCM SG: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("GCM SG: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_SG_MEM_SIZE);
@@ -132,7 +134,7 @@ build_authenc_gcm_sg_fd(dpaa2_sec_session *sess,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG, "GCM SG: auth_off: 0x%x/length %d, digest-len=%d\n"
+       DPAA2_SEC_DP_DEBUG("GCM SG: auth_off: 0x%x/length %d, digest-len=%d\n"
                   "iv-len=%d data_off: 0x%x\n",
                   sym_op->aead.data.offset,
                   sym_op->aead.data.length,
@@ -264,7 +266,7 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
         */
        retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
        if (retval) {
-               RTE_LOG(ERR, PMD, "GCM: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("GCM: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_POOL_BUF_SIZE);
@@ -297,7 +299,7 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG, "GCM: auth_off: 0x%x/length %d, digest-len=%d\n"
+       DPAA2_SEC_DP_DEBUG("GCM: auth_off: 0x%x/length %d, digest-len=%d\n"
                   "iv-len=%d data_off: 0x%x\n",
                   sym_op->aead.data.offset,
                   sym_op->aead.data.length,
@@ -409,7 +411,7 @@ build_authenc_sg_fd(dpaa2_sec_session *sess,
        fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
                        RTE_CACHE_LINE_SIZE);
        if (unlikely(!fle)) {
-               RTE_LOG(ERR, PMD, "AUTHENC SG: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("AUTHENC SG: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_SG_MEM_SIZE);
@@ -428,16 +430,16 @@ build_authenc_sg_fd(dpaa2_sec_session *sess,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG,
-                       "AUTHENC SG: auth_off: 0x%x/length %d, digest-len=%d\n"
-                       "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
-                  sym_op->auth.data.offset,
-                  sym_op->auth.data.length,
-                  sess->digest_length,
-                  sym_op->cipher.data.offset,
-                  sym_op->cipher.data.length,
-                  sess->iv.length,
-                  sym_op->m_src->data_off);
+       DPAA2_SEC_DP_DEBUG(
+               "AUTHENC SG: auth_off: 0x%x/length %d, digest-len=%d\n"
+               "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
+               sym_op->auth.data.offset,
+               sym_op->auth.data.length,
+               sess->digest_length,
+               sym_op->cipher.data.offset,
+               sym_op->cipher.data.length,
+               sess->iv.length,
+               sym_op->m_src->data_off);
 
        /* Configure Output FLE with Scatter/Gather Entry */
        DPAA2_SET_FLE_SG_EXT(op_fle);
@@ -558,7 +560,7 @@ build_authenc_fd(dpaa2_sec_session *sess,
         */
        retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
        if (retval) {
-               RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_POOL_BUF_SIZE);
@@ -591,15 +593,16 @@ build_authenc_fd(dpaa2_sec_session *sess,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG, "AUTHENC: auth_off: 0x%x/length %d, digest-len=%d\n"
-                  "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
-                  sym_op->auth.data.offset,
-                  sym_op->auth.data.length,
-                  sess->digest_length,
-                  sym_op->cipher.data.offset,
-                  sym_op->cipher.data.length,
-                  sess->iv.length,
-                  sym_op->m_src->data_off);
+       DPAA2_SEC_DP_DEBUG(
+               "AUTHENC: auth_off: 0x%x/length %d, digest-len=%d\n"
+               "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
+               sym_op->auth.data.offset,
+               sym_op->auth.data.length,
+               sess->digest_length,
+               sym_op->cipher.data.offset,
+               sym_op->cipher.data.length,
+               sess->iv.length,
+               sym_op->m_src->data_off);
 
        /* Configure Output FLE with Scatter/Gather Entry */
        DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
@@ -686,7 +689,7 @@ static inline int build_auth_sg_fd(
        fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
                        RTE_CACHE_LINE_SIZE);
        if (unlikely(!fle)) {
-               RTE_LOG(ERR, PMD, "AUTH SG: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("AUTH SG: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_SG_MEM_SIZE);
@@ -762,7 +765,7 @@ build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 
        retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
        if (retval) {
-               RTE_LOG(ERR, PMD, "AUTH Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("AUTH Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_POOL_BUF_SIZE);
@@ -859,7 +862,7 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
        fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
                        RTE_CACHE_LINE_SIZE);
        if (!fle) {
-               RTE_LOG(ERR, PMD, "CIPHER SG: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("CIPHER SG: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_SG_MEM_SIZE);
@@ -873,12 +876,13 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 
        flc = &priv->flc_desc[0].flc;
 
-       PMD_TX_LOG(DEBUG,
-                       "CIPHER SG: cipher_off: 0x%x/length %d,ivlen=%d data_off: 0x%x",
-                  sym_op->cipher.data.offset,
-                  sym_op->cipher.data.length,
-                  sess->iv.length,
-                  sym_op->m_src->data_off);
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER SG: cipher_off: 0x%x/length %d, ivlen=%d"
+               " data_off: 0x%x\n",
+               sym_op->cipher.data.offset,
+               sym_op->cipher.data.length,
+               sess->iv.length,
+               sym_op->m_src->data_off);
 
        /* o/p fle */
        DPAA2_SET_FLE_ADDR(op_fle, DPAA2_VADDR_TO_IOVA(sge));
@@ -901,10 +905,10 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
        }
        DPAA2_SET_FLE_FIN(sge);
 
-       PMD_TX_LOG(DEBUG,
-                       "CIPHER SG: 1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d",
-                       flc, fle, fle->addr_hi, fle->addr_lo,
-                       fle->length);
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER SG: 1 - flc = %p, fle = %p FLEaddr = %x-%x, len %d\n",
+               flc, fle, fle->addr_hi, fle->addr_lo,
+               fle->length);
 
        /* i/p fle */
        mbuf = sym_op->m_src;
@@ -944,8 +948,9 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG, "CIPHER SG: fdaddr =%" PRIx64
-               " bpid =%d meta =%d off =%d, len =%d\n",
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER SG: fdaddr =%" PRIx64 " bpid =%d meta =%d"
+               " off =%d, len =%d\n",
                DPAA2_GET_FD_ADDR(fd),
                DPAA2_GET_FD_BPID(fd),
                rte_dpaa2_bpid_info[bpid].meta_data_size,
@@ -976,7 +981,7 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 
        retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
        if (retval) {
-               RTE_LOG(ERR, PMD, "CIPHER: Memory alloc failed for SGE\n");
+               DPAA2_SEC_ERR("CIPHER: Memory alloc failed for SGE");
                return -1;
        }
        memset(fle, 0, FLE_POOL_BUF_SIZE);
@@ -1012,12 +1017,13 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
        DPAA2_SET_FD_COMPOUND_FMT(fd);
        DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 
-       PMD_TX_LOG(DEBUG,
-                       "CIPHER: cipher_off: 0x%x/length %d, ivlen=%d, data_off: 0x%x",
-                  sym_op->cipher.data.offset,
-                  sym_op->cipher.data.length,
-                  sess->iv.length,
-                  sym_op->m_src->data_off);
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER: cipher_off: 0x%x/length %d, ivlen=%d,"
+               " data_off: 0x%x\n",
+               sym_op->cipher.data.offset,
+               sym_op->cipher.data.length,
+               sess->iv.length,
+               sym_op->m_src->data_off);
 
        DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(dst));
        DPAA2_SET_FLE_OFFSET(fle, sym_op->cipher.data.offset +
@@ -1025,10 +1031,10 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 
        fle->length = sym_op->cipher.data.length + sess->iv.length;
 
-       PMD_TX_LOG(DEBUG,
-                       "CIPHER: 1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d",
-                       flc, fle, fle->addr_hi, fle->addr_lo,
-                       fle->length);
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER: 1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d\n",
+               flc, fle, fle->addr_hi, fle->addr_lo,
+               fle->length);
 
        fle++;
 
@@ -1049,13 +1055,14 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
        DPAA2_SET_FLE_FIN(sge);
        DPAA2_SET_FLE_FIN(fle);
 
-       PMD_TX_LOG(DEBUG,
-                       "CIPHER: fdaddr =%p bpid =%d meta =%d off =%d, len =%d",
-                  (void *)DPAA2_GET_FD_ADDR(fd),
-                  DPAA2_GET_FD_BPID(fd),
-                  rte_dpaa2_bpid_info[bpid].meta_data_size,
-                  DPAA2_GET_FD_OFFSET(fd),
-                  DPAA2_GET_FD_LEN(fd));
+       DPAA2_SEC_DP_DEBUG(
+               "CIPHER: fdaddr =%" PRIx64 " bpid =%d meta =%d"
+               " off =%d, len =%d\n",
+               DPAA2_GET_FD_ADDR(fd),
+               DPAA2_GET_FD_BPID(fd),
+               rte_dpaa2_bpid_info[bpid].meta_data_size,
+               DPAA2_GET_FD_OFFSET(fd),
+               DPAA2_GET_FD_LEN(fd));
 
        return 0;
 }
@@ -1095,7 +1102,7 @@ build_sec_fd(struct rte_crypto_op *op,
                        break;
                case DPAA2_SEC_HASH_CIPHER:
                default:
-                       RTE_LOG(ERR, PMD, "error: Unsupported session\n");
+                       DPAA2_SEC_ERR("error: Unsupported session");
                }
        } else {
                switch (sess->ctxt_type) {
@@ -1116,7 +1123,7 @@ build_sec_fd(struct rte_crypto_op *op,
                        break;
                case DPAA2_SEC_HASH_CIPHER:
                default:
-                       RTE_LOG(ERR, PMD, "error: Unsupported session\n");
+                       DPAA2_SEC_ERR("error: Unsupported session");
                }
        }
        return ret;
@@ -1143,7 +1150,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                return 0;
 
        if (ops[0]->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
-               RTE_LOG(ERR, PMD, "sessionless crypto op not supported\n");
+               DPAA2_SEC_ERR("sessionless crypto op not supported");
                return 0;
        }
        /*Prepare enqueue descriptor*/
@@ -1155,7 +1162,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
        if (!DPAA2_PER_LCORE_SEC_DPIO) {
                ret = dpaa2_affine_qbman_swp_sec();
                if (ret) {
-                       RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+                       DPAA2_SEC_ERR("Failure in affining portal");
                        return 0;
                }
        }
@@ -1171,8 +1178,8 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                        bpid = mempool_to_bpid(mb_pool);
                        ret = build_sec_fd(*ops, &fd_arr[loop], bpid);
                        if (ret) {
-                               PMD_DRV_LOG(ERR, "error: Improper packet"
-                                           " contents for crypto operation\n");
+                               DPAA2_SEC_ERR("error: Improper packet contents"
+                                             " for crypto operation");
                                goto skip_tx;
                        }
                        ops++;
@@ -1236,8 +1243,8 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, uint8_t driver_id)
 
        fle = (struct qbman_fle *)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd));
 
-       PMD_RX_LOG(DEBUG, "FLE addr = %x - %x, offset = %x",
-                  fle->addr_hi, fle->addr_lo, fle->fin_bpid_offset);
+       DPAA2_SEC_DP_DEBUG("FLE addr = %x - %x, offset = %x\n",
+                          fle->addr_hi, fle->addr_lo, fle->fin_bpid_offset);
 
        /* we are using the first FLE entry to store Mbuf.
         * Currently we donot know which FLE has the mbuf stored.
@@ -1248,7 +1255,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, uint8_t driver_id)
 
        if (unlikely(DPAA2_GET_FD_IVP(fd))) {
                /* TODO complete it. */
-               RTE_LOG(ERR, PMD, "error: Non inline buffer - WHAT to DO?\n");
+               DPAA2_SEC_ERR("error: non inline buffer");
                return NULL;
        }
        op = (struct rte_crypto_op *)DPAA2_IOVA_TO_VADDR(
@@ -1264,11 +1271,10 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, uint8_t driver_id)
        } else
                dst = src;
 
-       PMD_RX_LOG(DEBUG, "mbuf %p BMAN buf addr %p",
-                  (void *)dst, dst->buf_addr);
-
-       PMD_RX_LOG(DEBUG, "fdaddr =%" PRIx64
-               " bpid =%d meta =%d off =%d, len =%d",
+       DPAA2_SEC_DP_DEBUG("mbuf %p BMAN buf addr %p,"
+               " fdaddr =%" PRIx64 " bpid =%d meta =%d off =%d, len =%d\n",
+               (void *)dst,
+               dst->buf_addr,
                DPAA2_GET_FD_ADDR(fd),
                DPAA2_GET_FD_BPID(fd),
                rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
@@ -1304,7 +1310,7 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
        if (!DPAA2_PER_LCORE_SEC_DPIO) {
                ret = dpaa2_affine_qbman_swp_sec();
                if (ret) {
-                       RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+                       DPAA2_SEC_ERR("Failure in affining portal");
                        return 0;
                }
        }
@@ -1323,8 +1329,8 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
        /*Issue a volatile dequeue command. */
        while (1) {
                if (qbman_swp_pull(swp, &pulldesc)) {
-                       RTE_LOG(WARNING, PMD,
-                               "SEC VDQ command is not issued : QBMAN busy\n");
+                       DPAA2_SEC_WARN(
+                               "SEC VDQ command is not issued : QBMAN busy");
                        /* Portal was busy, try again */
                        continue;
                }
@@ -1356,7 +1362,7 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
                        status = (uint8_t)qbman_result_DQ_flags(dq_storage);
                        if (unlikely(
                                (status & QBMAN_DQ_STAT_VALIDFRAME) == 0)) {
-                               PMD_RX_LOG(DEBUG, "No frame is delivered");
+                               DPAA2_SEC_DP_DEBUG("No frame is delivered\n");
                                continue;
                        }
                }
@@ -1366,8 +1372,8 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
 
                if (unlikely(fd->simple.frc)) {
                        /* TODO Parse SEC errors */
-                       RTE_LOG(ERR, PMD, "SEC returned Error - %x\n",
-                               fd->simple.frc);
+                       DPAA2_SEC_ERR("SEC returned Error - %x",
+                                     fd->simple.frc);
                        ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_ERROR;
                } else {
                        ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
@@ -1379,7 +1385,7 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
 
        dpaa2_qp->rx_vq.rx_pkts += num_rx;
 
-       PMD_RX_LOG(DEBUG, "SEC Received %d Packets", num_rx);
+       DPAA2_SEC_DP_DEBUG("SEC Received %d Packets\n", num_rx);
        /*Return the total number of packets received to DPAA2 app*/
        return num_rx;
 }
@@ -1421,11 +1427,11 @@ dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
 
        /* If qp is already in use free ring memory and qp metadata. */
        if (dev->data->queue_pairs[qp_id] != NULL) {
-               PMD_DRV_LOG(INFO, "QP already setup");
+               DPAA2_SEC_INFO("QP already setup");
                return 0;
        }
 
-       PMD_DRV_LOG(DEBUG, "dev =%p, queue =%d, conf =%p",
+       DPAA2_SEC_DEBUG("dev =%p, queue =%d, conf =%p",
                    dev, qp_id, qp_conf);
 
        memset(&cfg, 0, sizeof(struct dpseci_rx_queue_cfg));
@@ -1433,7 +1439,7 @@ dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
        qp = rte_malloc(NULL, sizeof(struct dpaa2_sec_qp),
                        RTE_CACHE_LINE_SIZE);
        if (!qp) {
-               RTE_LOG(ERR, PMD, "malloc failed for rx/tx queues\n");
+               DPAA2_SEC_ERR("malloc failed for rx/tx queues");
                return -1;
        }
 
@@ -1443,13 +1449,13 @@ dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
                sizeof(struct queue_storage_info_t),
                RTE_CACHE_LINE_SIZE);
        if (!qp->rx_vq.q_storage) {
-               RTE_LOG(ERR, PMD, "malloc failed for q_storage\n");
+               DPAA2_SEC_ERR("malloc failed for q_storage");
                return -1;
        }
        memset(qp->rx_vq.q_storage, 0, sizeof(struct queue_storage_info_t));
 
        if (dpaa2_alloc_dq_storage(qp->rx_vq.q_storage)) {
-               RTE_LOG(ERR, PMD, "dpaa2_alloc_dq_storage failed\n");
+               DPAA2_SEC_ERR("Unable to allocate dequeue storage");
                return -1;
        }
 
@@ -1518,7 +1524,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
                        sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
                        RTE_CACHE_LINE_SIZE);
        if (priv == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
+               DPAA2_SEC_ERR("No Memory for priv CTXT");
                return -1;
        }
 
@@ -1529,7 +1535,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
        session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
                        RTE_CACHE_LINE_SIZE);
        if (session->cipher_key.data == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
+               DPAA2_SEC_ERR("No Memory for cipher key");
                rte_free(priv);
                return -1;
        }
@@ -1572,11 +1578,11 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
        case RTE_CRYPTO_CIPHER_ZUC_EEA3:
        case RTE_CRYPTO_CIPHER_NULL:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
+               DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
                        xform->cipher.algo);
                goto error_out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
+               DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
                        xform->cipher.algo);
                goto error_out;
        }
@@ -1587,7 +1593,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
                                        &cipherdata, NULL, session->iv.length,
                                        session->dir);
        if (bufsize < 0) {
-               RTE_LOG(ERR, PMD, "Crypto: Descriptor build failed\n");
+               DPAA2_SEC_ERR("Crypto: Descriptor build failed");
                goto error_out;
        }
        flc->dhr = 0;
@@ -1604,8 +1610,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
        session->ctxt = priv;
 
        for (i = 0; i < bufsize; i++)
-               PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n",
-                           i, priv->flc_desc[0].desc[i]);
+               DPAA2_SEC_DEBUG("DESC[%d]:0x%x", i, priv->flc_desc[0].desc[i]);
 
        return 0;
 
@@ -1634,7 +1639,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
                        sizeof(struct sec_flc_desc),
                        RTE_CACHE_LINE_SIZE);
        if (priv == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
+               DPAA2_SEC_ERR("No Memory for priv CTXT");
                return -1;
        }
 
@@ -1644,7 +1649,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
        session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
                        RTE_CACHE_LINE_SIZE);
        if (session->auth_key.data == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for auth key\n");
+               DPAA2_SEC_ERR("Unable to allocate memory for auth key");
                rte_free(priv);
                return -1;
        }
@@ -1704,12 +1709,12 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_AUTH_AES_CMAC:
        case RTE_CRYPTO_AUTH_AES_CBC_MAC:
        case RTE_CRYPTO_AUTH_ZUC_EIA3:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
-                       xform->auth.algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported auth alg %un",
+                             xform->auth.algo);
                goto error_out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
-                       xform->auth.algo);
+               DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
+                             xform->auth.algo);
                goto error_out;
        }
        session->dir = (xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
@@ -1728,8 +1733,8 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
                        dev->data->queue_pairs[0])->rx_vq));
        session->ctxt = priv;
        for (i = 0; i < bufsize; i++)
-               PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n",
-                           i, priv->flc_desc[DESC_INITFINAL].desc[i]);
+               DPAA2_SEC_DEBUG("DESC[%d]:0x%x",
+                               i, priv->flc_desc[DESC_INITFINAL].desc[i]);
 
 
        return 0;
@@ -1766,7 +1771,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
                        sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
                        RTE_CACHE_LINE_SIZE);
        if (priv == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
+               DPAA2_SEC_ERR("No Memory for priv CTXT");
                return -1;
        }
 
@@ -1776,7 +1781,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
        session->aead_key.data = rte_zmalloc(NULL, aead_xform->key.length,
                                               RTE_CACHE_LINE_SIZE);
        if (session->aead_key.data == NULL && aead_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for aead key\n");
+               DPAA2_SEC_ERR("No Memory for aead key");
                rte_free(priv);
                return -1;
        }
@@ -1799,12 +1804,12 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
                session->aead_alg = RTE_CRYPTO_AEAD_AES_GCM;
                break;
        case RTE_CRYPTO_AEAD_AES_CCM:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported AEAD alg %u\n",
-                       aead_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported AEAD alg %u",
+                             aead_xform->algo);
                goto error_out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined AEAD specified %u\n",
-                       aead_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Undefined AEAD specified %u",
+                             aead_xform->algo);
                goto error_out;
        }
        session->dir = (aead_xform->op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
@@ -1817,7 +1822,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
                               &priv->flc_desc[0].desc[1], 1);
 
        if (err < 0) {
-               PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths\n");
+               DPAA2_SEC_ERR("Crypto: Incorrect key lengths");
                goto error_out;
        }
        if (priv->flc_desc[0].desc[1] & 1) {
@@ -1848,7 +1853,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
                        dev->data->queue_pairs[0])->rx_vq));
        session->ctxt = priv;
        for (i = 0; i < bufsize; i++)
-               PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n",
+               DPAA2_SEC_DEBUG("DESC[%d]:0x%x\n",
                            i, priv->flc_desc[0].desc[i]);
 
        return 0;
@@ -1900,7 +1905,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
                        sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
                        RTE_CACHE_LINE_SIZE);
        if (priv == NULL) {
-               RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
+               DPAA2_SEC_ERR("No Memory for priv CTXT");
                return -1;
        }
 
@@ -1910,7 +1915,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
        session->cipher_key.data = rte_zmalloc(NULL, cipher_xform->key.length,
                                               RTE_CACHE_LINE_SIZE);
        if (session->cipher_key.data == NULL && cipher_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
+               DPAA2_SEC_ERR("No Memory for cipher key");
                rte_free(priv);
                return -1;
        }
@@ -1918,7 +1923,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
        session->auth_key.data = rte_zmalloc(NULL, auth_xform->key.length,
                                             RTE_CACHE_LINE_SIZE);
        if (session->auth_key.data == NULL && auth_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for auth key\n");
+               DPAA2_SEC_ERR("No Memory for auth key");
                rte_free(session->cipher_key.data);
                rte_free(priv);
                return -1;
@@ -1981,12 +1986,12 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_AUTH_AES_CMAC:
        case RTE_CRYPTO_AUTH_AES_CBC_MAC:
        case RTE_CRYPTO_AUTH_ZUC_EIA3:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
-                       auth_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported auth alg %u",
+                             auth_xform->algo);
                goto error_out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
-                       auth_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
+                             auth_xform->algo);
                goto error_out;
        }
        cipherdata.key = (size_t)session->cipher_key.data;
@@ -2015,12 +2020,12 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_3DES_ECB:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_KASUMI_F8:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
-                       cipher_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
+                             cipher_xform->algo);
                goto error_out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
-                       cipher_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
+                             cipher_xform->algo);
                goto error_out;
        }
        session->dir = (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
@@ -2034,7 +2039,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
                               &priv->flc_desc[0].desc[2], 2);
 
        if (err < 0) {
-               PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths\n");
+               DPAA2_SEC_ERR("Crypto: Incorrect key lengths");
                goto error_out;
        }
        if (priv->flc_desc[0].desc[2] & 1) {
@@ -2061,7 +2066,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
                                              session->digest_length,
                                              session->dir);
        } else {
-               RTE_LOG(ERR, PMD, "Hash before cipher not supported\n");
+               DPAA2_SEC_ERR("Hash before cipher not supported");
                goto error_out;
        }
 
@@ -2074,7 +2079,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
                        dev->data->queue_pairs[0])->rx_vq));
        session->ctxt = priv;
        for (i = 0; i < bufsize; i++)
-               PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n",
+               DPAA2_SEC_DEBUG("DESC[%d]:0x%x",
                            i, priv->flc_desc[0].desc[i]);
 
        return 0;
@@ -2095,7 +2100,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
        PMD_INIT_FUNC_TRACE();
 
        if (unlikely(sess == NULL)) {
-               RTE_LOG(ERR, PMD, "invalid session struct\n");
+               DPAA2_SEC_ERR("Invalid session struct");
                return -1;
        }
 
@@ -2131,7 +2136,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
                dpaa2_sec_aead_init(dev, xform, session);
 
        } else {
-               RTE_LOG(ERR, PMD, "Invalid crypto type\n");
+               DPAA2_SEC_ERR("Invalid crypto type");
                return -EINVAL;
        }
 
@@ -2169,7 +2174,7 @@ dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
                                RTE_CACHE_LINE_SIZE);
 
        if (priv == NULL) {
-               RTE_LOG(ERR, PMD, "\nNo memory for priv CTXT");
+               DPAA2_SEC_ERR("No memory for priv CTXT");
                return -ENOMEM;
        }
 
@@ -2181,7 +2186,7 @@ dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
                                               RTE_CACHE_LINE_SIZE);
        if (session->cipher_key.data == NULL &&
                        cipher_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
+               DPAA2_SEC_ERR("No Memory for cipher key");
                rte_free(priv);
                return -ENOMEM;
        }
@@ -2192,7 +2197,7 @@ dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
                                        RTE_CACHE_LINE_SIZE);
        if (session->auth_key.data == NULL &&
                        auth_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for auth key\n");
+               DPAA2_SEC_ERR("No Memory for auth key");
                rte_free(session->cipher_key.data);
                rte_free(priv);
                return -ENOMEM;
@@ -2254,12 +2259,12 @@ dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
        case RTE_CRYPTO_AUTH_KASUMI_F9:
        case RTE_CRYPTO_AUTH_AES_CBC_MAC:
        case RTE_CRYPTO_AUTH_ZUC_EIA3:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
-                       auth_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported auth alg %u",
+                             auth_xform->algo);
                goto out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
-                       auth_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
+                             auth_xform->algo);
                goto out;
        }
        cipherdata.key = (size_t)session->cipher_key.data;
@@ -2290,12 +2295,12 @@ dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_3DES_ECB:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_KASUMI_F8:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
-                       cipher_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
+                             cipher_xform->algo);
                goto out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
-                       cipher_xform->algo);
+               DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
+                             cipher_xform->algo);
                goto out;
        }
 
@@ -2380,8 +2385,7 @@ dpaa2_sec_security_session_create(void *dev,
        int ret;
 
        if (rte_mempool_get(mempool, &sess_private_data)) {
-               CDEV_LOG_ERR(
-                       "Couldn't get object from session mempool");
+               DPAA2_SEC_ERR("Couldn't get object from session mempool");
                return -ENOMEM;
        }
 
@@ -2396,9 +2400,7 @@ dpaa2_sec_security_session_create(void *dev,
                return -EINVAL;
        }
        if (ret != 0) {
-               PMD_DRV_LOG(ERR,
-                       "DPAA2 PMD: failed to configure session parameters");
-
+               DPAA2_SEC_ERR("Failed to configure session parameters");
                /* Return session to mempool */
                rte_mempool_put(mempool, sess_private_data);
                return ret;
@@ -2442,16 +2444,13 @@ dpaa2_sec_session_configure(struct rte_cryptodev *dev,
        int ret;
 
        if (rte_mempool_get(mempool, &sess_private_data)) {
-               CDEV_LOG_ERR(
-                       "Couldn't get object from session mempool");
+               DPAA2_SEC_ERR("Couldn't get object from session mempool");
                return -ENOMEM;
        }
 
        ret = dpaa2_sec_set_session_parameters(dev, xform, sess_private_data);
        if (ret != 0) {
-               PMD_DRV_LOG(ERR, "DPAA2 PMD: failed to configure "
-                               "session parameters");
-
+               DPAA2_SEC_ERR("Failed to configure session parameters");
                /* Return session to mempool */
                rte_mempool_put(mempool, sess_private_data);
                return ret;
@@ -2512,14 +2511,13 @@ dpaa2_sec_dev_start(struct rte_cryptodev *dev)
 
        ret = dpseci_enable(dpseci, CMD_PRI_LOW, priv->token);
        if (ret) {
-               PMD_INIT_LOG(ERR, "DPSECI with HW_ID = %d ENABLE FAILED\n",
-                            priv->hw_id);
+               DPAA2_SEC_ERR("DPSECI with HW_ID = %d ENABLE FAILED",
+                             priv->hw_id);
                goto get_attr_failure;
        }
        ret = dpseci_get_attributes(dpseci, CMD_PRI_LOW, priv->token, &attr);
        if (ret) {
-               PMD_INIT_LOG(ERR,
-                            "DPSEC ATTRIBUTE READ FAILED, disabling DPSEC\n");
+               DPAA2_SEC_ERR("DPSEC ATTRIBUTE READ FAILED, disabling DPSEC");
                goto get_attr_failure;
        }
        for (i = 0; i < attr.num_rx_queues && qp[i]; i++) {
@@ -2527,14 +2525,14 @@ dpaa2_sec_dev_start(struct rte_cryptodev *dev)
                dpseci_get_rx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
                                    &rx_attr);
                dpaa2_q->fqid = rx_attr.fqid;
-               PMD_INIT_LOG(DEBUG, "rx_fqid: %d", dpaa2_q->fqid);
+               DPAA2_SEC_DEBUG("rx_fqid: %d", dpaa2_q->fqid);
        }
        for (i = 0; i < attr.num_tx_queues && qp[i]; i++) {
                dpaa2_q = &qp[i]->tx_vq;
                dpseci_get_tx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
                                    &tx_attr);
                dpaa2_q->fqid = tx_attr.fqid;
-               PMD_INIT_LOG(DEBUG, "tx_fqid: %d", dpaa2_q->fqid);
+               DPAA2_SEC_DEBUG("tx_fqid: %d", dpaa2_q->fqid);
        }
 
        return 0;
@@ -2554,15 +2552,14 @@ dpaa2_sec_dev_stop(struct rte_cryptodev *dev)
 
        ret = dpseci_disable(dpseci, CMD_PRI_LOW, priv->token);
        if (ret) {
-               PMD_INIT_LOG(ERR, "Failure in disabling dpseci %d device",
+               DPAA2_SEC_ERR("Failure in disabling dpseci %d device",
                             priv->hw_id);
                return;
        }
 
        ret = dpseci_reset(dpseci, CMD_PRI_LOW, priv->token);
        if (ret < 0) {
-               PMD_INIT_LOG(ERR, "SEC Device cannot be reset:Error = %0x\n",
-                            ret);
+               DPAA2_SEC_ERR("SEC Device cannot be reset:Error = %0x", ret);
                return;
        }
 }
@@ -2586,8 +2583,7 @@ dpaa2_sec_dev_close(struct rte_cryptodev *dev)
        /*Close the device at underlying layer*/
        ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token);
        if (ret) {
-               PMD_INIT_LOG(ERR, "Failure closing dpseci device with"
-                            " error code %d\n", ret);
+               DPAA2_SEC_ERR("Failure closing dpseci device: err(%d)", ret);
                return -1;
        }
 
@@ -2627,12 +2623,12 @@ void dpaa2_sec_stats_get(struct rte_cryptodev *dev,
 
        PMD_INIT_FUNC_TRACE();
        if (stats == NULL) {
-               PMD_DRV_LOG(ERR, "invalid stats ptr NULL");
+               DPAA2_SEC_ERR("Invalid stats ptr NULL");
                return;
        }
        for (i = 0; i < dev->data->nb_queue_pairs; i++) {
                if (qp[i] == NULL) {
-                       PMD_DRV_LOG(DEBUG, "Uninitialised queue pair");
+                       DPAA2_SEC_DEBUG("Uninitialised queue pair");
                        continue;
                }
 
@@ -2645,16 +2641,16 @@ void dpaa2_sec_stats_get(struct rte_cryptodev *dev,
        ret = dpseci_get_sec_counters(dpseci, CMD_PRI_LOW, priv->token,
                                      &counters);
        if (ret) {
-               PMD_DRV_LOG(ERR, "dpseci_get_sec_counters failed\n");
+               DPAA2_SEC_ERR("SEC counters failed");
        } else {
-               PMD_DRV_LOG(INFO, "dpseci hw stats:"
-                       "\n\tNumber of Requests Dequeued = %" PRIu64
-                       "\n\tNumber of Outbound Encrypt Requests = %" PRIu64
-                       "\n\tNumber of Inbound Decrypt Requests = %" PRIu64
-                       "\n\tNumber of Outbound Bytes Encrypted = %" PRIu64
-                       "\n\tNumber of Outbound Bytes Protected = %" PRIu64
-                       "\n\tNumber of Inbound Bytes Decrypted = %" PRIu64
-                       "\n\tNumber of Inbound Bytes Validated = %" PRIu64,
+               DPAA2_SEC_INFO("dpseci hardware stats:"
+                           "\n\tNum of Requests Dequeued = %" PRIu64
+                           "\n\tNum of Outbound Encrypt Requests = %" PRIu64
+                           "\n\tNum of Inbound Decrypt Requests = %" PRIu64
+                           "\n\tNum of Outbound Bytes Encrypted = %" PRIu64
+                           "\n\tNum of Outbound Bytes Protected = %" PRIu64
+                           "\n\tNum of Inbound Bytes Decrypted = %" PRIu64
+                           "\n\tNum of Inbound Bytes Validated = %" PRIu64,
                            counters.dequeued_requests,
                            counters.ob_enc_requests,
                            counters.ib_dec_requests,
@@ -2676,7 +2672,7 @@ void dpaa2_sec_stats_reset(struct rte_cryptodev *dev)
 
        for (i = 0; i < dev->data->nb_queue_pairs; i++) {
                if (qp[i] == NULL) {
-                       PMD_DRV_LOG(DEBUG, "Uninitialised queue pair");
+                       DPAA2_SEC_DEBUG("Uninitialised queue pair");
                        continue;
                }
                qp[i]->tx_vq.rx_pkts = 0;
@@ -2730,8 +2726,8 @@ dpaa2_sec_uninit(const struct rte_cryptodev *dev)
 
        rte_mempool_free(internals->fle_pool);
 
-       PMD_INIT_LOG(INFO, "Closing DPAA2_SEC device %s on numa socket %u\n",
-                    dev->data->name, rte_socket_id());
+       DPAA2_SEC_INFO("Closing DPAA2_SEC device %s on numa socket %u",
+                      dev->data->name, rte_socket_id());
 
        return 0;
 }
@@ -2752,7 +2748,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
        PMD_INIT_FUNC_TRACE();
        dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device);
        if (dpaa2_dev == NULL) {
-               PMD_INIT_LOG(ERR, "dpaa2_device not found\n");
+               DPAA2_SEC_ERR("DPAA2 SEC device not found");
                return -1;
        }
        hw_id = dpaa2_dev->object_id;
@@ -2777,7 +2773,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
         * RX function
         */
        if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-               PMD_INIT_LOG(DEBUG, "Device already init by primary process");
+               DPAA2_SEC_DEBUG("Device already init by primary process");
                return 0;
        }
 
@@ -2795,21 +2791,21 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
        dpseci = (struct fsl_mc_io *)rte_calloc(NULL, 1,
                                sizeof(struct fsl_mc_io), 0);
        if (!dpseci) {
-               PMD_INIT_LOG(ERR,
-                            "Error in allocating the memory for dpsec object");
+               DPAA2_SEC_ERR(
+                       "Error in allocating the memory for dpsec object");
                return -1;
        }
        dpseci->regs = rte_mcp_ptr_list[0];
 
        retcode = dpseci_open(dpseci, CMD_PRI_LOW, hw_id, &token);
        if (retcode != 0) {
-               PMD_INIT_LOG(ERR, "Cannot open the dpsec device: Error = %x",
-                            retcode);
+               DPAA2_SEC_ERR("Cannot open the dpsec device: Error = %x",
+                             retcode);
                goto init_error;
        }
        retcode = dpseci_get_attributes(dpseci, CMD_PRI_LOW, token, &attr);
        if (retcode != 0) {
-               PMD_INIT_LOG(ERR,
+               DPAA2_SEC_ERR(
                             "Cannot get dpsec device attributed: Error = %x",
                             retcode);
                goto init_error;
@@ -2829,15 +2825,15 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
                        NULL, NULL, NULL, NULL,
                        SOCKET_ID_ANY, 0);
        if (!internals->fle_pool) {
-               RTE_LOG(ERR, PMD, "%s create failed\n", str);
+               DPAA2_SEC_ERR("Mempool (%s) creation failed", str);
                goto init_error;
        }
 
-       PMD_INIT_LOG(DEBUG, "driver %s: created\n", cryptodev->data->name);
+       DPAA2_SEC_INFO("driver %s: created", cryptodev->data->name);
        return 0;
 
 init_error:
-       PMD_INIT_LOG(ERR, "driver %s: create failed\n", cryptodev->data->name);
+       DPAA2_SEC_ERR("driver %s: create failed", cryptodev->data->name);
 
        /* dpaa2_sec_uninit(crypto_dev_name); */
        return -EFAULT;
@@ -2867,7 +2863,7 @@ cryptodev_dpaa2_sec_probe(struct rte_dpaa2_driver *dpaa2_drv,
 
                if (cryptodev->data->dev_private == NULL)
                        rte_panic("Cannot allocate memzone for private "
-                                       "device data");
+                                 "device data");
        }
 
        dpaa2_dev->cryptodev = cryptodev;
@@ -2922,3 +2918,13 @@ static struct cryptodev_driver dpaa2_sec_crypto_drv;
 RTE_PMD_REGISTER_DPAA2(CRYPTODEV_NAME_DPAA2_SEC_PMD, rte_dpaa2_sec_driver);
 RTE_PMD_REGISTER_CRYPTO_DRIVER(dpaa2_sec_crypto_drv, rte_dpaa2_sec_driver,
                cryptodev_driver_id);
+
+RTE_INIT(dpaa2_sec_init_log);
+static void
+dpaa2_sec_init_log(void)
+{
+       /* Bus level logs */
+       dpaa2_logtype_sec = rte_log_register("pmd.crypto.dpaa2");
+       if (dpaa2_logtype_sec >= 0)
+               rte_log_set_level(dpaa2_logtype_sec, RTE_LOG_NOTICE);
+}
index 2325114..7c1f5e7 100644 (file)
@@ -8,37 +8,35 @@
 #ifndef _DPAA2_SEC_LOGS_H_
 #define _DPAA2_SEC_LOGS_H_
 
-#define PMD_INIT_LOG(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
-
-#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT
-#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
-#else
-#define PMD_INIT_FUNC_TRACE() do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_RX
-#define PMD_RX_LOG(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
-#else
-#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_TX
-#define PMD_TX_LOG(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
-#else
-#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER
-#define PMD_DRV_LOG_RAW(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
-#else
-#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
-#endif
-
-#define PMD_DRV_LOG(level, fmt, args...) \
-       PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
+extern int dpaa2_logtype_sec;
+
+#define DPAA2_SEC_LOG(level, fmt, args...) \
+       rte_log(RTE_LOG_ ## level, dpaa2_logtype_sec, "dpaa2_sec: " \
+               fmt "\n", ##args)
+
+#define DPAA2_SEC_DEBUG(fmt, args...) \
+       rte_log(RTE_LOG_DEBUG, dpaa2_logtype_sec, "dpaa2_sec: %s(): " \
+               fmt "\n", __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() DPAA2_SEC_LOG(DEBUG, " >>")
+
+#define DPAA2_SEC_INFO(fmt, args...) \
+       DPAA2_SEC_LOG(INFO, fmt, ## args)
+#define DPAA2_SEC_ERR(fmt, args...) \
+       DPAA2_SEC_LOG(ERR, fmt, ## args)
+#define DPAA2_SEC_WARN(fmt, args...) \
+       DPAA2_SEC_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define DPAA2_SEC_DP_LOG(level, fmt, args...) \
+       RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#define DPAA2_SEC_DP_DEBUG(fmt, args...) \
+       DPAA2_SEC_DP_LOG(DEBUG, fmt, ## args)
+#define DPAA2_SEC_DP_INFO(fmt, args...) \
+       DPAA2_SEC_DP_LOG(INFO, fmt, ## args)
+#define DPAA2_SEC_DP_WARN(fmt, args...) \
+       DPAA2_SEC_DP_LOG(WARNING, fmt, ## args)
+
 
 #endif /* _DPAA2_SEC_LOGS_H_ */