struct rte_rawdev_info info = { .dev_private = NULL };
if (rte_rawdev_info_get(i, &info) == 0 &&
strstr(info.driver_name, "ioat") != NULL)
- return TEST_SUCCESS;
+ return rte_rawdev_selftest(i) == 0 ?
+ TEST_SUCCESS : TEST_FAILED;
}
printf("No IOAT rawdev found, skipping tests\n");
be NULL, or else be set to point to a structure of type
``rte_ioat_rawdev_config``, in which case the size of the configured device
input ring will be returned in that structure.
+
+Device Configuration
+~~~~~~~~~~~~~~~~~~~~~
+
+Configuring an IOAT rawdev device is done using the
+``rte_rawdev_configure()`` API, which takes the same structure parameters
+as the, previously referenced, ``rte_rawdev_info_get()`` API. The main
+difference is that, because the parameter is used as input rather than
+output, the ``dev_private`` structure element cannot be NULL, and must
+point to a valid ``rte_ioat_rawdev_config`` structure, containing the ring
+size to be used by the device. The ring size must be a power of two,
+between 64 and 4096.
+
+The following code shows how the device is configured in
+``test_ioat_rawdev.c``:
+
+.. code-block:: C
+
+ #define IOAT_TEST_RINGSIZE 512
+ struct rte_ioat_rawdev_config p = { .ring_size = -1 };
+ struct rte_rawdev_info info = { .dev_private = &p };
+
+ /* ... */
+
+ p.ring_size = IOAT_TEST_RINGSIZE;
+ if (rte_rawdev_configure(dev_id, &info) != 0) {
+ printf("Error with rte_rawdev_configure()\n");
+ return -1;
+ }
+
+Once configured, the device can then be made ready for use by calling the
+``rte_rawdev_start()`` API.
# library source files
SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += ioat_rawdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += ioat_rawdev_test.c
# export include files
SYMLINK-y-include += rte_ioat_rawdev.h
#define IOAT_PMD_ERR(fmt, args...) IOAT_PMD_LOG(ERR, fmt, ## args)
#define IOAT_PMD_WARN(fmt, args...) IOAT_PMD_LOG(WARNING, fmt, ## args)
+#define DESC_SZ sizeof(struct rte_ioat_generic_hw_desc)
+#define COMPLETION_SZ sizeof(__m128i)
+
+static int
+ioat_dev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config)
+{
+ struct rte_ioat_rawdev_config *params = config;
+ struct rte_ioat_rawdev *ioat = dev->dev_private;
+ char mz_name[RTE_MEMZONE_NAMESIZE];
+ unsigned short i;
+
+ if (dev->started)
+ return -EBUSY;
+
+ if (params == NULL)
+ return -EINVAL;
+
+ if (params->ring_size > 4096 || params->ring_size < 64 ||
+ !rte_is_power_of_2(params->ring_size))
+ return -EINVAL;
+
+ ioat->ring_size = params->ring_size;
+ if (ioat->desc_ring != NULL) {
+ rte_memzone_free(ioat->desc_mz);
+ ioat->desc_ring = NULL;
+ ioat->desc_mz = NULL;
+ }
+
+ /* allocate one block of memory for both descriptors
+ * and completion handles.
+ */
+ snprintf(mz_name, sizeof(mz_name), "rawdev%u_desc_ring", dev->dev_id);
+ ioat->desc_mz = rte_memzone_reserve(mz_name,
+ (DESC_SZ + COMPLETION_SZ) * ioat->ring_size,
+ dev->device->numa_node, RTE_MEMZONE_IOVA_CONTIG);
+ if (ioat->desc_mz == NULL)
+ return -ENOMEM;
+ ioat->desc_ring = ioat->desc_mz->addr;
+ ioat->hdls = (void *)&ioat->desc_ring[ioat->ring_size];
+
+ ioat->ring_addr = ioat->desc_mz->iova;
+
+ /* configure descriptor ring - each one points to next */
+ for (i = 0; i < ioat->ring_size; i++) {
+ ioat->desc_ring[i].next = ioat->ring_addr +
+ (((i + 1) % ioat->ring_size) * DESC_SZ);
+ }
+
+ return 0;
+}
+
+static int
+ioat_dev_start(struct rte_rawdev *dev)
+{
+ struct rte_ioat_rawdev *ioat = dev->dev_private;
+
+ if (ioat->ring_size == 0 || ioat->desc_ring == NULL)
+ return -EBUSY;
+
+ /* inform hardware of where the descriptor ring is */
+ ioat->regs->chainaddr = ioat->ring_addr;
+ /* inform hardware of where to write the status/completions */
+ ioat->regs->chancmp = ioat->status_addr;
+
+ /* prime the status register to be set to the last element */
+ ioat->status = ioat->ring_addr + ((ioat->ring_size - 1) * DESC_SZ);
+ return 0;
+}
+
+static void
+ioat_dev_stop(struct rte_rawdev *dev)
+{
+ RTE_SET_USED(dev);
+}
+
static void
ioat_dev_info_get(struct rte_rawdev *dev, rte_rawdev_obj_t dev_info)
{
cfg->ring_size = ioat->ring_size;
}
+extern int ioat_rawdev_test(uint16_t dev_id);
+
static int
ioat_rawdev_create(const char *name, struct rte_pci_device *dev)
{
static const struct rte_rawdev_ops ioat_rawdev_ops = {
+ .dev_configure = ioat_dev_configure,
+ .dev_start = ioat_dev_start,
+ .dev_stop = ioat_dev_stop,
.dev_info_get = ioat_dev_info_get,
+ .dev_selftest = ioat_rawdev_test,
};
struct rte_rawdev *rawdev = NULL;
if (rdev->dev_private != NULL) {
struct rte_ioat_rawdev *ioat = rdev->dev_private;
rdev->dev_private = NULL;
+ rte_memzone_free(ioat->desc_mz);
rte_memzone_free(ioat->mz);
}
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019 Intel Corporation
+ */
+
+#include "rte_rawdev.h"
+#include "rte_ioat_rawdev.h"
+
+int ioat_rawdev_test(uint16_t dev_id); /* pre-define to keep compiler happy */
+
+int
+ioat_rawdev_test(uint16_t dev_id)
+{
+#define IOAT_TEST_RINGSIZE 512
+ struct rte_ioat_rawdev_config p = { .ring_size = -1 };
+ struct rte_rawdev_info info = { .dev_private = &p };
+
+ rte_rawdev_info_get(dev_id, &info);
+ if (p.ring_size != 0) {
+ printf("Error, initial ring size is non-zero (%d)\n",
+ (int)p.ring_size);
+ return -1;
+ }
+
+ p.ring_size = IOAT_TEST_RINGSIZE;
+ if (rte_rawdev_configure(dev_id, &info) != 0) {
+ printf("Error with rte_rawdev_configure()\n");
+ return -1;
+ }
+ rte_rawdev_info_get(dev_id, &info);
+ if (p.ring_size != IOAT_TEST_RINGSIZE) {
+ printf("Error, ring size is not %d (%d)\n",
+ IOAT_TEST_RINGSIZE, (int)p.ring_size);
+ return -1;
+ }
+
+ if (rte_rawdev_start(dev_id) != 0) {
+ printf("Error with rte_rawdev_start()\n");
+ return -1;
+ }
+ return 0;
+}
# Copyright 2019 Intel Corporation
build = dpdk_conf.has('RTE_ARCH_X86')
-sources = files('ioat_rawdev.c')
+sources = files('ioat_rawdev.c',
+ 'ioat_rawdev_test.c')
deps += ['rawdev', 'bus_pci']
install_headers('rte_ioat_rawdev.h',
* @b EXPERIMENTAL: these structures and APIs may change without prior notice
*/
+#include <x86intrin.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_ioat_spec.h>
unsigned short ring_size;
struct rte_ioat_generic_hw_desc *desc_ring;
+ __m128i *hdls; /* completion handles for returning to user */
/* to report completions, the device will write status back here */
volatile uint64_t status __rte_cache_aligned;
git.droids-corp.org / dpdk.git / commitdiff