net/ixgbe: fix tunnel type set error for FDIR
authorWei Zhao <wei.zhao1@intel.com>
Thu, 14 Jun 2018 08:17:28 +0000 (16:17 +0800)
committerFerruh Yigit <ferruh.yigit@intel.com>
Mon, 2 Jul 2018 23:35:57 +0000 (01:35 +0200)
Tunnel type format should be translated to ixgbe required format
before register set in FDIR cloud mode, Ans also some register
not useful in cloud mode but only useful in IP mode should be set
to zero as datasheet request.

Fixes: 82fb702077f6 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c727 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
drivers/net/ixgbe/ixgbe_ethdev.h
drivers/net/ixgbe/ixgbe_fdir.c
drivers/net/ixgbe/ixgbe_flow.c

index e42ec30..d0b9396 100644 (file)
 #define IXGBE_5TUPLE_MAX_PRI            7
 #define IXGBE_5TUPLE_MIN_PRI            1
 
+/* bit of VXLAN tunnel type | 7 bits of zeros  | 8 bits of zeros*/
+#define IXGBE_FDIR_VXLAN_TUNNEL_TYPE    0x8000
+/* bit of NVGRE tunnel type | 7 bits of zeros  | 8 bits of zeros*/
+#define IXGBE_FDIR_NVGRE_TUNNEL_TYPE    0x0
+
 #define IXGBE_RSS_OFFLOAD_ALL ( \
        ETH_RSS_IPV4 | \
        ETH_RSS_NONFRAG_IPV4_TCP | \
index 67ab627..6baf825 100644 (file)
@@ -771,8 +771,17 @@ ixgbe_fdir_filter_to_atr_input(const struct rte_eth_fdir_filter *fdir_filter,
                        input->formatted.inner_mac,
                        fdir_filter->input.flow.tunnel_flow.mac_addr.addr_bytes,
                        sizeof(input->formatted.inner_mac));
-               input->formatted.tunnel_type =
-                       fdir_filter->input.flow.tunnel_flow.tunnel_type;
+               if (fdir_filter->input.flow.tunnel_flow.tunnel_type ==
+                               RTE_FDIR_TUNNEL_TYPE_VXLAN)
+                       input->formatted.tunnel_type =
+                                       IXGBE_FDIR_VXLAN_TUNNEL_TYPE;
+               else if (fdir_filter->input.flow.tunnel_flow.tunnel_type ==
+                               RTE_FDIR_TUNNEL_TYPE_NVGRE)
+                       input->formatted.tunnel_type =
+                                       IXGBE_FDIR_NVGRE_TUNNEL_TYPE;
+               else
+                       PMD_DRV_LOG(ERR, " invalid tunnel type arguments.");
+
                input->formatted.tni_vni =
                        fdir_filter->input.flow.tunnel_flow.tunnel_id >> 8;
        }
@@ -1001,8 +1010,7 @@ fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
                        IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), 0);
                } else {
                        /* tunnel mode */
-                       if (input->formatted.tunnel_type !=
-                               RTE_FDIR_TUNNEL_TYPE_NVGRE)
+                       if (input->formatted.tunnel_type)
                                tunnel_type = 0x80000000;
                        tunnel_type |= addr_high;
                        IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), addr_low);
@@ -1010,6 +1018,9 @@ fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
                        IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2),
                                        input->formatted.tni_vni);
                }
+               IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, 0);
+               IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, 0);
+               IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, 0);
        }
 
        /* record vlan (little-endian) and flex_bytes(big-endian) */
index 000f4ad..1adf1b8 100644 (file)
@@ -2438,7 +2438,7 @@ ixgbe_parse_fdir_filter_tunnel(const struct rte_flow_attr *attr,
        /* Get the VxLAN info */
        if (item->type == RTE_FLOW_ITEM_TYPE_VXLAN) {
                rule->ixgbe_fdir.formatted.tunnel_type =
-                       RTE_FDIR_TUNNEL_TYPE_VXLAN;
+                               IXGBE_FDIR_VXLAN_TUNNEL_TYPE;
 
                /* Only care about VNI, others should be masked. */
                if (!item->mask) {
@@ -2496,7 +2496,7 @@ ixgbe_parse_fdir_filter_tunnel(const struct rte_flow_attr *attr,
        /* Get the NVGRE info */
        if (item->type == RTE_FLOW_ITEM_TYPE_NVGRE) {
                rule->ixgbe_fdir.formatted.tunnel_type =
-                       RTE_FDIR_TUNNEL_TYPE_NVGRE;
+                               IXGBE_FDIR_NVGRE_TUNNEL_TYPE;
 
                /**
                 * Only care about flags0, flags1, protocol and TNI,