net/mvneta: add link update

Add callback for updating information about link status/info.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

diff --git a/doc/guides/nics/features/mvneta.ini b/doc/guides/nics/features/mvneta.ini
index bc4e400..581ed31 100644 (file)
--- a/doc/guides/nics/features/mvneta.ini
+++ b/doc/guides/nics/features/mvneta.ini
@@ -5,6 +5,7 @@
 ;
 [Features]
 Speed capabilities   = Y
+Link status          = Y
 MTU update           = Y
 Jumbo frame          = Y
 CRC offload          = Y

diff --git a/doc/guides/nics/mvneta.rst b/doc/guides/nics/mvneta.rst
index aadeacb..fdea3da 100644 (file)
--- a/doc/guides/nics/mvneta.rst
+++ b/doc/guides/nics/mvneta.rst
@@ -31,6 +31,7 @@ Features of the MVNETA PMD are:
 - Speed capabilities
 - Jumbo frame
 - MTU update
+- Link status
 - CRC offload
 - L3 checksum offload
 - L4 checksum offload

diff --git a/drivers/net/mvneta/mvneta_ethdev.c b/drivers/net/mvneta/mvneta_ethdev.c
index 24f87e2..052e97f 100644 (file)
--- a/drivers/net/mvneta/mvneta_ethdev.c
+++ b/drivers/net/mvneta/mvneta_ethdev.c
@@ -451,6 +451,76 @@ mvneta_dev_close(struct rte_eth_dev *dev)
        }
 }
 
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ *   Wait for request completion (ignored).
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
+{
+       /*
+        * TODO
+        * once MUSDK provides necessary API use it here
+        */
+       struct mvneta_priv *priv = dev->data->dev_private;
+       struct ethtool_cmd edata;
+       struct ifreq req;
+       int ret, fd, link_up;
+
+       if (!priv->ppio)
+               return -EPERM;
+
+       edata.cmd = ETHTOOL_GSET;
+
+       strcpy(req.ifr_name, dev->data->name);
+       req.ifr_data = (void *)&edata;
+
+       fd = socket(AF_INET, SOCK_DGRAM, 0);
+       if (fd == -1)
+               return -EFAULT;
+       ret = ioctl(fd, SIOCETHTOOL, &req);
+       if (ret == -1) {
+               close(fd);
+               return -EFAULT;
+       }
+
+       close(fd);
+
+       switch (ethtool_cmd_speed(&edata)) {
+       case SPEED_10:
+               dev->data->dev_link.link_speed = ETH_SPEED_NUM_10M;
+               break;
+       case SPEED_100:
+               dev->data->dev_link.link_speed = ETH_SPEED_NUM_100M;
+               break;
+       case SPEED_1000:
+               dev->data->dev_link.link_speed = ETH_SPEED_NUM_1G;
+               break;
+       case SPEED_2500:
+               dev->data->dev_link.link_speed = ETH_SPEED_NUM_2_5G;
+               break;
+       default:
+               dev->data->dev_link.link_speed = ETH_SPEED_NUM_NONE;
+       }
+
+       dev->data->dev_link.link_duplex = edata.duplex ? ETH_LINK_FULL_DUPLEX :
+                                                        ETH_LINK_HALF_DUPLEX;
+       dev->data->dev_link.link_autoneg = edata.autoneg ? ETH_LINK_AUTONEG :
+                                                          ETH_LINK_FIXED;
+
+       neta_ppio_get_link_state(priv->ppio, &link_up);
+       dev->data->dev_link.link_status = link_up ? ETH_LINK_UP : ETH_LINK_DOWN;
+
+       return 0;
+}
+
 /**
  * DPDK callback to set the primary MAC address.
  *
@@ -484,6 +554,7 @@ static const struct eth_dev_ops mvneta_ops = {
        .dev_set_link_up = mvneta_dev_set_link_up,
        .dev_set_link_down = mvneta_dev_set_link_down,
        .dev_close = mvneta_dev_close,
+       .link_update = mvneta_link_update,
        .mac_addr_set = mvneta_mac_addr_set,
        .mtu_set = mvneta_mtu_set,
        .dev_infos_get = mvneta_dev_infos_get,