app/test: improve error message for disabled crypto

Improve error message if crypto PMD build is not enabled in config file

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 62a192e..d960d72 100644 (file)
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -182,6 +182,11 @@ testsuite_setup(void)
 
        /* Create 2 AESNI MB devices if required */
        if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(
                                RTE_CRYPTODEV_AESNI_MB_PMD);
                if (nb_devs < 2) {
@@ -199,6 +204,11 @@ testsuite_setup(void)
 
        /* Create 2 AESNI GCM devices if required */
        if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_GCM
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(
                                RTE_CRYPTODEV_AESNI_GCM_PMD);
                if (nb_devs < 2) {
@@ -214,6 +224,11 @@ testsuite_setup(void)
 
        /* Create 2 SNOW 3G devices if required */
        if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
                if (nb_devs < 2) {
                        for (i = nb_devs; i < 2; i++) {
@@ -228,6 +243,11 @@ testsuite_setup(void)
 
        /* Create 2 KASUMI devices if required */
        if (gbl_cryptodev_type == RTE_CRYPTODEV_KASUMI_PMD) {
+#ifndef RTE_LIBRTE_PMD_KASUMI
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_KASUMI must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_KASUMI_PMD);
                if (nb_devs < 2) {
                        for (i = nb_devs; i < 2; i++) {
@@ -242,6 +262,11 @@ testsuite_setup(void)
 
        /* Create 2 NULL devices if required */
        if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) {
+#ifndef RTE_LIBRTE_PMD_NULL_CRYPTO
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(
                                RTE_CRYPTODEV_NULL_PMD);
                if (nb_devs < 2) {
@@ -257,6 +282,14 @@ testsuite_setup(void)
                }
        }
 
+#ifndef RTE_LIBRTE_PMD_QAT
+       if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) {
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+                               "in config file to run this testsuite.\n");
+               return TEST_FAILED;
+       }
+#endif
+
        nb_devs = rte_cryptodev_count();
        if (nb_devs < 1) {
                RTE_LOG(ERR, USER1, "No crypto devices found?");

diff --git a/app/test/test_cryptodev_perf.c b/app/test/test_cryptodev_perf.c
index 3fe9b14..6af0896 100644 (file)
--- a/app/test/test_cryptodev_perf.c
+++ b/app/test/test_cryptodev_perf.c
@@ -299,6 +299,11 @@ testsuite_setup(void)
 
        /* Create 2 AESNI MB devices if required */
        if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_MB_PMD);
                if (nb_devs < 2) {
                        for (i = nb_devs; i < 2; i++) {
@@ -314,6 +319,11 @@ testsuite_setup(void)
 
        /* Create 2 AESNI GCM devices if required */
        if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_GCM
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_GCM_PMD);
                if (nb_devs < 2) {
                        for (i = nb_devs; i < 2; i++) {
@@ -329,6 +339,11 @@ testsuite_setup(void)
 
        /* Create 2 SNOW3G devices if required */
        if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
                nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
                if (nb_devs < 2) {
                        for (i = nb_devs; i < 2; i++) {
@@ -342,6 +357,14 @@ testsuite_setup(void)
                }
        }
 
+#ifndef RTE_LIBRTE_PMD_QAT
+       if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+                               "in config file to run this testsuite.\n");
+               return TEST_FAILED;
+       }
+#endif
+
        nb_devs = rte_cryptodev_count();
        if (nb_devs < 1) {
                RTE_LOG(ERR, USER1, "No crypto devices found?");