return rc;
}
+int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
+{
+ int rc = 0;
+ struct hwrm_vnic_cfg_input req = {.req_type = 0 };
+ struct hwrm_vnic_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, VNIC_CFG, -1, resp);
+
+ /* Only RSS support for now TBD: COS & LB */
+ req.enables =
+ rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP |
+ HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE |
+ HWRM_VNIC_CFG_INPUT_ENABLES_MRU);
+ req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+ req.dflt_ring_grp =
+ rte_cpu_to_le_16(bp->grp_info[vnic->start_grp_id].fw_grp_id);
+ req.rss_rule = rte_cpu_to_le_16(vnic->fw_rss_cos_lb_ctx);
+ req.cos_rule = rte_cpu_to_le_16(0xffff);
+ req.lb_rule = rte_cpu_to_le_16(0xffff);
+ req.mru = rte_cpu_to_le_16(bp->eth_dev->data->mtu + ETHER_HDR_LEN +
+ ETHER_CRC_LEN + VLAN_TAG_SIZE);
+ if (vnic->func_default)
+ req.flags = 1;
+ if (vnic->vlan_strip)
+ req.flags |=
+ rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic)
{
int rc = 0;
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_FREE (UINT32_C(0x41))
+#define HWRM_VNIC_CFG (UINT32_C(0x42))
#define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90))
#define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
uint8_t valid;
} __attribute__((packed));
+/* hwrm_vnic_cfg */
+/* Description: Configure the RX VNIC structure. */
+
+/* Input (40 bytes) */
+struct hwrm_vnic_cfg_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', the VNIC is requested to be the default VNIC
+ * for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to strip VLAN in
+ * the RX path. If set to '0', then VLAN stripping is disabled on this
+ * VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to buffer receive
+ * packets in the hardware until the host posts new receive buffers. If
+ * set to '0', then bd_stall is being configured to be disabled on this
+ * VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to receive both
+ * RoCE and non-RoCE traffic. If set to '0', then this VNIC is not
+ * configured to be operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to be configured
+ * to receive only RoCE traffic. If this flag is set to '0', then this
+ * flag shall be ignored by the HWRM. If roce_dual_vnic_mode flag is set
+ * to '1', then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ uint32_t flags;
+
+ /* This bit must be '1' for the dflt_ring_grp field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
+ /* This bit must be '1' for the rss_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
+ /* This bit must be '1' for the cos_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
+ /* This bit must be '1' for the lb_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
+ uint32_t enables;
+
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+
+ /*
+ * Default Completion ring for the VNIC. This ring will be chosen if
+ * packet does not match any RSS rules and if there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
+
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+ * RSS rule.
+ */
+ uint16_t rss_rule;
+
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+ * COS rule.
+ */
+ uint16_t cos_rule;
+
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+ * there is no LB rule.
+ */
+ uint16_t lb_rule;
+
+ /*
+ * The maximum receive unit of the vnic. Each vnic is associated with a
+ * function. The vnic mru value overwrites the mru setting of the
+ * associated function. The HWRM shall make sure that vnic mru does not
+ * exceed the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_cfg_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/* hwrm_vnic_free */
/*
* Description: Free a VNIC resource. Idle any resources associated with the
git.droids-corp.org / dpdk.git / commitdiff